IED (Intelligent Electronic Device)
|
|
- Ashley Page
- 5 years ago
- Views:
Transcription
1 IED (Intelligent Electronic Device)
2
3 Neopis IED (Intelligent Electronic Device)
4 Intelligent Electronic Device Dynamic Characteristics PROMET 4300-F PROMET 4300-M Relay Type Setting Setting Range Setting Function Items Steps Remarks Pickup Value Block, 1~80[A] 1.0[A] Instantaneous Operating Time 40~500[ms] [ms] OCR Pickup Value Block, 0.5~16[A] 0.1[A] (50/51) NI/VI/EI/DT Pickup Value Block, 0.5~40[A] 0.1[A] Instantaneous Operating Time 40~500[ms] [ms] OCGR Pickup Value Block, 0.2~5[A] 0.1[A] (50/51N) NI/VI/EI/DT Reference Angle 0~90[deg] 1[deg] Operation Angle 60~90[deg] 1[deg] Pickup Value Block, 1~80[A] 1.0[A] DOCR Instantaneous Operating Time 40~500[ms] [ms] (67P) Pickup Value Block, 0.5~16[A] 0.1[A] Operating Time Timed NI/VI/EI/DT Pickup Value Block, 0~150[%] 1[%] OVR 0.1~50.0[Tm] 0.1[Tm] NI (59) NI/DT Pickup Value Block, ~0[%] 1[%] UVR 0.1~50.0[Tm] 0.1[Tm] NI (27) NI/DT NSOVR Pickup Value Block, 5~0[%] 1[%] Timed (47N) Operating Time Instantaneous Pickup Value Block, 20~0[%] 1[%] Pickup Value Block, 5~40[%] 1[%] OVGR 0.1~50.0[Tm] 0.1[Tm] NI (64G) NI/DT Reference Angle 0~45[deg] 1[deg] Operation Angle 60~90[deg] 1[deg] Instantaneous Pickup Value Block, 0.5~40[A] 0.1[A] DGR Operating Time 40~500[ms] [ms] (67N) Pickup Value Block, 0.2~5[A] 0.1[A] Timed Operating Time NI/VI/EI/DT Reference Angle 0~60[deg] 1[deg] Operation Angle 60~90[deg] 1[deg] SGR Pickup Current Block, 1~[mA] 0.1[mA] (67G) Timed Pickup Voltage 5~40[%] 1[%] Operating Time Relay Type Setting Setting Range Setting Function Items Steps Remarks Pickup Value Block, 1~80[A] 1.0[A] Instantaneous Operating Time 40~500[ms] [ms] OCR Pickup Value Block, 0.5~16[A] 0.1[A] (50/51) NI/VI/EI/DT Pickup Value Block, 0.5~40[A] 0.1[A] Instantaneous Operating Time 40~500[ms] [ms] OCGR Pickup Value Block, 0.2~5[A] 0.1[A] (50/51N) NI/VI/EI/DT Upper Limit 0.2~5[A] 0.1[A] UCR Lower Limit 0.2~5[A] 0.1[A] (37) 0.1~.0[s] 0.1[s] DT Instantaneous Pickup Value Block, 0.5~12[A] 0.1[A] NSOCR Operating Time (46) Timed NI/VI/EI/DT Timed Pickup Value Block, 0.5~[A] 0.1[A] THR Heating Factor 0.5~60[min] 0.5[min] (49) Cooling Factor 0.0~60[min] 0.5[min] Pickup Value Block, 1~50.0[A] 0.2[A] 51LR, DT NI/VI/EI/LI/DT Pickup Value Block, 1~80.0[A] 0.5[A] Operating Time 48ST Timed Locked 1.0~.0[pu] 0.1[pu] Rotate Amp. Pickup Value Block, ~0[%] 1[%] UVR 0.1~50.0[Tm] 0.1[Tm] NI (27) NI/DT NSOVR Pickup Value Block, 5~0[%] 1[%] Timed (47N) Operating Time Reference Angle 0~45[deg] 1[deg] Operation Angle 60~90[deg] 1[deg] Pickup Value Block, 0.5~40[A] 0.1[A] Instantaneous DGR Operating Time 40~500[ms] [ms] (67N) Pickup Value Block, 0.2~5[A] 0.1[A] NI/VI/EI/DT Reference Angle 0~60[deg] 1[deg] Operation Angle 60~90[deg] 1[deg] SGR Pickup Current Block, 1~[mA] 0.1[mA] (67G) Timed Pickup Voltage 5~40[%] 1[%] Operating Time 4
5 Neopis IED (Intelligent Electronic Device) Neopis IED (Intelligent Electronic Device) PROMET 4300-T Relay Type Setting Setting Range Setting Function Items Steps Remarks Instan- Pickup Value Block, 5~0[A] 0.5[A] OP time: within 40 ms taneous Operating Time 40~500[ms] [ms] Pickup Value Block, 0.5~[A] 0.05[A] Slope 1 5~0[%] 1[%] RDR Timed Slope 2 OFF, 50~200[%] 1[%] (87T) Knee Point 5~0[A] 0.5[A] Operating Time 0.05~[s] 0.01[s] DT Restrain 2th Block % OFF, 5~0[%] 1[%] Harmonic 5th Block % OFF, 5~0[%] 1[%] Instan- Pickup Value Block, 1~80[A] 1.0[A] taneous Operating Time 40 ~500[ms] [ms] OCR(1) Pickup Value Block, 0.5~16[A] 0.1[A] (50/51) NI/VI/EI/DT Instan- Pickup Value Block, 0.5~40[A] 0.1[A] taneous Operating Time 40~500[ms] [ms] OCGR(1) Pickup Value Block,0.2~5[A] 0.1[A] (50/51N) NI/VI/EI/DT Instan- Pickup Value Block, 1~80[A] 1.0[A] taneous Operating Time 40~500[ms] [ms] OCR(2) Pickup Value Block, 0.5~16[A] 0.1[A] (50/51) NI/VI/EI/DT Instan- Pickup Value Block, 0.5~40[A] 0.1[A] taneous Operating Time 40~500[ms] [ms] OCGR(2) Pickup Value Block, 0.2~5[A] 0.1[A] (50/51N) NI/VI/EI/DT Instantaneous Pickup Value Block, 20 ~0[%] 1[%] OP time: within 50 ms Pickup Value Block, 5~40[%] 1[%] OVGR 0.1~50.0[Tm] 0.1[Tm] NI (64G) NI/DT Instan- Pickup Value Block, 1~80[A] 1.0[A] taneous Operating Time 40~500[mS] [ms] OCR(3) Pickup Value Block, 0.5~16[A] 0.1[A] (50/51) NI/VI/EI/DT Instan- Pickup Value Block, 0.5~40[A] 0.1[A] taneous Operating Time 40~500[ms] [ms] OCGR(3) Pickup Value Block,0.2~5[A] 0.1[A] (50/51N) NI/VI/EI/DT * 3-Wired Tr. IED (Intelligent Electronic Device) 5
6 Intelligent Electronic Device Characteristic curve Overcurrent Normal Inverse (NI) Overcurrent Very Inverse (VI) OCR (50/51), OCGR (50N/51N), NSOCR (46) OCR (50/51), OCGR (50N/51N), NSOCR (46) t 0.14 ( I/ Is ) Tm t : Operating Time I : Input Current Is : Setting Current Tm: Time Lever t 13.5 ( I/ Is ) 1 Tm t : Operating Time I : Input Current Is : Setting Current Tm: Time Lever Overcurrent Extremely Inverse (EI) Overvoltage Normal inverse (NI) OCR (50/51), OCGR (50N/51N), NSOCR (46), Locked Rotator (51LR) OVR (59) t 80 2 ( I/ Is ) 1 Tm t : Operating Time I : Input Current Is : Setting Current Tm: Time Lever t.5 2 ( V/ Vs ) 1 Tm t : Operating Time V : Input Voltage Vs : Setting Voltage Tm : Time Lever 6
7 Neopis IED (Intelligent Electronic Device) Undervoltage Normal Inverse (NI) Gound-Overvoltage Normal Inverse (NI) UVR (27) [V/Vs] OVGR (64) [V/Vs] t ( V/ Vs ) Tm t : Operating Time V : Input Voltage Vs : Setting Voltage Tm : Time Lever t ( V/ Vs ) 1 Tm t : Operating Time V : Input Voltage Vs : Setting Voltage Tm : Time Lever Directional Relays Differential curve RDR (87T) [2-Wired Tr.] [3-Wired Tr.] Id=I differential = I 1 - I 2 (Vector sum.) Id=I differential = I 1 - I 2 - I 3 (Vector sum.) Ir=I restraint = I 1 + I 2 (Scalar sum.) Ir=I restraint = I 1 + I 2 + I 3 (Scalar sum.) SGR (67G), DGR (67N) I differential SLOPE= I restraint I differential SLOPE= I restraint I 1 : Primary Current, I 2 : Secondary Current I 3 : Tertiary Current IED (Intelligent Electronic Device) 7
8 Intelligent Electronic Device Features Metering Item Present Error Rates Remarks 3-Phase Voltages [kV] ± 0.5% Phase-to-Neutral Voltages & Phase-to-Phase Voltages V [V] ± 1.0% 3-Phase Currents [kA] ± 0.5% In [A] ± 0.1% Active Power [MW] ± 0.5% Reactive Power [MVAR] ± 0.5% Active Energy 0-9,999.99[MWH] ± 1.0% Import/Export Active Energy Reactive Energy 0-9,999.99[MVARH] ± 1.0% Import/Export Reactive Energy Power Factor Lead/Lag 0-0[%] ± 0.5% Instantaneous Power Factor & Average Power Factor Frequency [Hz] ± 1.0Hz THD 0 0.0[%] - Harmonics 0 0.0[%] - 2 ~ 23th Harmonics V, I Vca Ic lb Vbc Vab la 8
9 Neopis IED (Intelligent Electronic Device) Supervise and Control Digital Input Photo-isolated Binary Input CB On/Off Status Monitoring Programmable Contact input : 16 Port Input Circuits -AC 220V or DC 250V -AC 1V or DC 125V Control Output Trip, CB On/Off Control: 3Port -20 A 250 VAC Programmable Contact output -8 Port -5 A 250VAC Application -Relay Operation Alarm -Sequence Output by DI Contacts -Remote Control Output Analog Input (Option) AI: 4 port Isolated Circuit: Surge Protected Analog Inputs like Temperature, Pressure Analog Output (Option) AO: 4 port Analog Outputs like V,I and Power Records Fault Record Item Data Max. Storage Fault Information Oscillographic Fault Wave Operating Record Total Events of IED Operation Sequence Of Event (1mS Resolution) Max 24 Events Backup Event Items - CB ON/OFF Control - Setting Value Updates - Local/Remote Change - IED Restart - Self-Diagnosis Result - Binary Input Change - Fault Occurrence - Fault Reset - etc Operated Relays Fault Elements and Fault Phase Fault I,V values and Phase with Time Tag Operated Relays with Time Tag 3-Phase Voltages, V0, 3-Phase Currents and I0 Waves up to 24 Up to 6 waves 160 Cycle per record Load Profile Item Electrical Values Storage Peak Demand I, V, Power, Energy, Power Factor, Frequency Time Tagged Peak Values Demand Power, Energy, Power Factor, Frequency 90 Days Demand Datas IED (Intelligent Electronic Device) 9
10 Intelligent Electronic Device Features User Interface You can check and control many display and setting using graphic LCD, LED and function keys. Additionally, the Windowsbased software allows complete access to relay setting and fault information. Desktop, Laptop RS232C Port 115,200 bps RS232C (115200bps) Measure Value Check Check DI Status Auto Update Values Communication Transaction View Relay Characteristic Curve Check Relay Operating Time Check Setting Relay Parameters Default Setting Value Button Setting Range Check Function Check Operated Relay Operating Time Check Bar Fault Wave Analysis
11 Neopis IED (Intelligent Electronic Device) Wiring -F, M IED (Intelligent Electronic Device) 11
12 Dimension Top view Rear view Panel cut Front view Side view Ordering F : INCOMMING FEEDER Protection M : MOTOR Protection T : Transformer Protection 4F, Neo Bd, Jeonpa-ro 24beon-gil, Anyang7-Dong, Manan-Ku, Anyang-City, Kyonggi-Do, Korea Tel Fax NEOPIS CO., LTD
SYMAP R Plug in Variants FI, MI, 87M, TI Technical data
SYMAP R Plug in Variants FI, MI, 87M, TI Technical data 1 Product overview SYMAP R (Retrofit) is a digital protection relay for use in medium and high-voltage power systems. Because of its integrated protection
More informationSR489 SR489. Generator Management Relay. Economical protection, metering, and monitoring functions for small and medium sized generators.
SR489 Generator Management Relay Economical protection, metering, and monitoring functions for small and medium sized generators. 1 Product Highlights Inputs / Outputs Generator Protection Power Metering
More informationPROMET 410 Power Protective Relays. Intelligent microprocessor type
PROMET 4 Power Protective Relays Intelligent microprocessor type Specifications Model PROMET-4I.Equipment.Control Power ) Input voltage: AC/DC -0V (Free Voltage), AC/DC 0-60V(option) ) Power Consumption:
More informationHiMAP&HiCAM-II. HiMAP. HiCAM-II HYUNDAI DIGITAL PROTECTION & MEASURING DEVICE. Hyundai Intelligent Measuring & Protection Device
HYUNDAI DIGITAL PROTECTION & MEASURING DEVICE HiMAP&HiCAMII Hyundai Intelligent Measuring & Protection Device HiMAP Hyundai Intelligent Communication & Measuring Device HiCAMII HYUNDAI DIGITAL PROTECTION
More informationDigital Protection & Measurement Device
www.lsis.biz Digital Protection & Measurement Device GIPAM-2000/2200 Digital Integrated Protection & Monitoring Device The optimum protection which leads protective diagnosis and reliability improvement
More informationNPW800R RETROFITTING. Power and Volatge Protection Relay
RETROFITTING Power and Volatge Protection Relay NPW800R (R3 case) is dedicated to the refurbishment of CEE WTG 7000 relays (R3 case) providing the measurement of apparent (S), active (P) and reactive (Q)
More informationEarth-fault Relay SPAJ 110 C. Product Guide
Issued: April 1999 Status: Updated Version: C/12.04.2006 Data subject to change without notice Features Low-set neutral overcurrent stage with definite time or inverse time characteristic High-set neutral
More informationSEL-487B. A Powerful Solution for Busbar Differential Protection. Bus Differential and Breaker Failure Relay
Bus Differential and Breaker Failure Relay A Powerful Solution for Busbar Differential Protection Features and Benefits Select the for the differential protection of busbar systems with up to 18 terminals.
More informationCombined Overcurrent and Earth-fault Relay SPAJ 141 C. Product Guide
Combined Overcurrent and Earth-fault Product Guide Issued: April 1999 Status: Updated Version: C/19.04.2006 Data subject to change without notice Features Three-phase, low-set phase overcurrent unit with
More informationSIA-B. Overcurrent & Earth Fault Protection Relay for Secondary Distribution. Dual & Self Powered / Standard CTs. Main characteristics
SIA-B Overcurrent & Earth Fault Protection Relay for Secondary Distribution Dual & Self Powered / Standard CTs Main characteristics The SIA-B is an protection relay with self powered and dual powered (Self-powering
More informationDGSZV-EP DIGITAL GALVANIC LONGITUDINAL DIFFERENTIAL PROTECTION. Application field
DGSZV-EP DIGITAL GALVANIC LONGITUDINAL DIFFERENTIAL PROTECTION The digital galvanic longitudinal differential protection of type DGSZV-EP is part of device family named EuroProt. This short description
More informationCombined Overcurrent and Earth-fault Relay SPAJ 140 C. Product Guide
Combined Overcurrent and Earth-fault Product Guide Issued: April 1999 Status: Updated Version: C/18.04.2006 Data subject to change without notice Features Three-phase, low-set phase overcurrent unit with
More informationSDR recloser. A PH Fault B PH Fault C PH Fault. Ground Fault. SGF Lockout Aux Power OK. Recloser OK
SDR recloser A PH Fault B PH Fault C PH Fault Ground Fault SGF Lockout Aux Power OK Recloser OK Open Close Reclose ON Hot Line Tag ON All Protn OFF Inst Protn OFF Ground Fault Protn OFF SGF Protn OFF Trip
More informationSACE Emax 2 Specification guide
SACE Emax 2 Specification guide Specification Number: 26 01 20.17 Product Name: LOW VOLTAGE POWER CIRCUIT BREAKERS PART 1 GENERAL NOTE: ( ) Indicates option or a selection is to be made for quantity or
More informationINTRODUCTION. The PL-50 MO and PM-250 families represent the. PM-250-H: Horizontal box. PM-250-V: Vertical box
INTRODUCTION The PL-50 MO units are available in the next mechanical version: The PL-50 MO and PM-250 families represent the different solutions that Team Arteche offers for motor protection. Both families
More informationHMI software. gems 3100 Multi-Channel Power Meter
HMI software gems 3100 Multi-Channel Power Meter gems 3100 installed in local distribution panels as well as a main electric distribution panel has the features to manage facilities by metering and monitoring
More informationProtection, Monitoring, and Control System for Distribution Substations ALARM HISTORY SYSTEM COMM. On-Line Documentation TRANSFORMER 12 MW
SEL Distribution Substation Protection and Automation System Protection, Monitoring, and Control System for Distribution Substations Data Sheet SYSTEM ONE-LINE RELAY TARGETS ALARM HISTORY SYSTEM COMM.
More informationFeeder protection relay SPAA 121 C. Product Guide
Issued: April 1999 Status: Updated Version: C/06.03.2006 Data subject to change without notice Features Two-phase low-set phase overcurrent unit with definite time or inverse time characteristic Two-phase
More informationMemshield Overcurrent Protection Relay (AOR1B)
(AOB) Multi-function Protection Device Local and remote trip indication AO-B type OCs are available with trip indications. Two types of trip indication function are available: single contact type and individual
More informationFunction permission: yes/no. Operating range: 0.10 to 30 xin (step 0.01) Operating time: 0.02 to 300 s (step 0.01 s) Activation level 100%
Operating range: 0.10 to 30 xin (step 0.01) 50P(2) Activation level 100% Deactivation level 95% Timer accuracy: 30 ms Operating range: 0.10 to 30 xin (step 0.01) 50N/G(2) Activation level 100% Deactivation
More informationSIL-A. Overcurrent and Earth Fault Relay for Primary and Secondary Distribution. Main characteristics
SIL-A Overcurrent and Earth Fault Relay for Primary and Secondary Distribution Main characteristics The SIL-A is an overcurrent and earth fault protection relay for primary and secondary distribution with
More informationSensitive Earth-fault Relay SPAJ 111 C. Product Guide
Issued: April 1999 Status: Update Version: C/12.04.2006 Data subject to change without notice Features Sensitive low-set neutral overcurrent stage with definite time characteristic High-set neutral overcurrent
More informationVIP 40/45 VIP 400/410
40/45 400/410 Selection guide 01 PM100573 40/45 PM100576 400/410 self-powered integrated protection relay Optimised performance for transformer, incomer, feeder and bus riser protection Complete engineered
More informationProtection relays.
Protection relays www.vamp.fi Vamp Ltd Vamp Ltd, with a strong experience of designing devices, is an independent supplier of relays and monitoring equipment. The company has an established reputation
More informationGRD130 - FEATURES APPLICATION
FEATURES Phase undervoltage protection with IDMTL or DTL. Phase overvoltage protection with IDMTL or DTL. Zero phase sequence overvoltage (neutral voltage displacement) protection with IDMTL/DTL. Negative
More informationwww. ElectricalPartManuals. com Protective Relays HIGHLIGHTS PROTECTIVE FUNCTIONS ixp-420 Transformer Protection Relay
Protective Relays Electrical Apparatus ixp-420 Transformer Protection Relay 165-420 Figure 1: Edison Idea Relay The ixp-420 is a member of Cooper Power Systems Edison Idea line of protective relays. The
More information7SR11 and 7SR12 Settings and Instruments
7SR11 and 7SR12 Settings and Instruments Document Release History This document is issue 2012/01. The list of revisions up to and including this issue is: 2012/01 Software Maintenance 2011/06 Software
More informationFP6000. Type ID Units Writable Possible Values. Count. TCP Register
FP6000 Category System ID 1032 Vendor Name 32 ASCII no-units 1064 Model Name 32 ASCII no-units 1096 Display Name 32 ASCII no-units 1128 Device Type 32 ASCII no-units 1605 Field Replaceable Unit 1 UINT16
More informationSensitive definite time or inverse time earth-fault stage for back-up residual earthfault
Issued: April 1999 Status: Updated Version: B/09.11.2001 Data subject to change without notice Features Sensitive restricted earth-fault protection stage for fast, selective earth-fault protection Sensitive
More informationProtect induction and synchronous motors with one relay.
SEL-710-5 Motor Protection Relay Protect induction and synchronous motors with one relay. Patented, accurate thermal protection improves motor availability for production. Synchronous motor protection
More informationGE Power Management. UR F60 Feeder Management Relay An integrated feeder protection and metering solution
UR An integrated feeder protection and metering solution Power to Manage your Facility Connectivity ModBus RTU MMS/UCA2 TM Protocols SI Compatibility Flexibility FlexCurves FlexLogic The first Relay designed
More informationFor Transmission, Distribution and Machinery protection.
Founded in 1953, Microelettrica Scientifica has developed a wide range of products, divided into three main lines: For Transmission, Distribution and Machinery protection. A-Line Electronic analogic. M-Line
More informationNewCode. Comprehensive Motor Protection and Control Relay. Relay Field Input and Output LEDs. LED Fault Indicators
NewCode Comprehensive Motor Protection and Control Relay Relay Field Input and Output LEDs LED Fault Indicators Configurable Memory Module on a T-Bus IrDA and USB Connectors Profibus Address Indicator
More informationQ9 ASD LOW VOLTAGE DRIVE
ASD LOW VOLTAGE DRIVE HVAC-MINDED, SYSTEM FRIENDLY RELIABLE Toshiba has manufactured pulse-width modulated drives since 1981 and is one of the few companies that manufactures both motors and drives in
More informationSection 4 Ground-Fault Protection Devices
Multi 9 System Catalog Section 4Ground-Fault Protection Devices Section 4Ground-Fault Protection Devices Selection Table The Multi 9 System includes one UL Listed and three IEC rated product families that
More informationU niversal Measuring Device UMG 96 S. Little Fieldbus Giant. Modbus / Profibus. Harmonics. Memory. Analogue outputs. Digital I/O
U niversal Measuring Device Little Fieldbus Giant Modbus / Profibus Harmonics Memory Analogue outputs Digital I/O Modem Recorder Profibus Modbus PC I/O Universal Measuring Device Application Application
More informationNumerical Protective and Management Relays
Numerical Protective and Management Relays Presented at: The Institution of Engineers (India) Andaman and Nicobar State Centre Port Blair Dr. H. K. Verma Deputy Director and Professor of Electrical Engineering
More informationMIC-2 Multi-instrument DATA SHEET
Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules
More informationRTU560. CT/VT Interface 560CVT10. Meter Operation. Application. Characteristics. Data Sheet CT/VT Interface 560CVT10. Instantaneous Meter Values
CT/VT Interface 560CVT10 The fault current is measured up to 20 times nominal current. Therefore the current inputs withstand 50 times nominal current for 1 s. The CT/VT interface is equipped with one
More informationInteliPro. Protection Relay for Parallel Applications. Technical Specification
InteliPro Protection Relay for Parallel Applications Product description InteliPro is a highly flexible interconnection/mains decoupling protective relay with extensive protective functions. It meets the
More informationPowerLogic power-monitoring units. Power Meter PM500. Technical data sheet 2006
PowerLogic power-monitoring units Technical data sheet 2006 Functions and characteristics E90463 The PowerLogic PM500 Power Meter provides all measurement capabilities required to monitor an electrical
More informationMaximize process uptime with the SEL-patented motor thermal model.
SEL-710 Motor Protection Relay Maximize process uptime with the SEL-patented motor thermal model. Optimize motor performance with separate thermal models for the stator and rotor. Monitor stator and ambient
More informationEngyVolt RV12 and RV15
Technical Information EngyVolt RV12 and RV15 Multifunctional electrical energy meters for top-hat rail installation or panel mounting Application For measuring voltage, frequency, current, power, as well
More informationMIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET
& DIN, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationMiCOM P111. Three phase and earth fault overcurrent relays
Three phase and earth fault overcurrent relays The relays are suitable for all the application where overcurrent and/or earth-fault protection are required. Thanks to its favorable price vs technical features
More informationFP-5000 Series Multi-functional Microprocessor-based Feeder Protective Relay
FP-5000 Series Multi-functional Microprocessor-based Feeder Protective Relay The power of fusion. 1874 1886 1893 1899 1906 1908 1911 1934 1962 1963 1976 1983 1990 1999 There s a certain energy at Eaton.
More informationType: P9680 Combined Overcurrent and Earth Fault Relay
Type: P9680 Combined Overcurrent and Earth Fault Relay True R.M.S. measurements Low Set and High Set tripping thresholds for both Overcurrent and Earth Fault detection 6 selectable IDMT (Inverse Definite
More informationGRE120. Motor Protection and Control for MV Systems
Motor Protection and Control for MV Systems FEATURES Overcurrent protection for phase and earth faults (50/51P, 50/51N). Dependent and independent time characteristics (IDMTL and DTL). Restricted earth
More informationES3 OP - EUROSTEP3 for ac power supply input
Rev. 04.2004 01FW4B ES3 OP - EUROSTEP3 for ac power supply input FEATURES: Stepping motor drive, power supply from 18 to 60 Vac, current up to 7A. NPN/PNP optoisolated inputs and outputs compatibles with
More informationPQM - Power Quality Monitoring
UMG 96S PQM - Power Quality Monitoring The little field bus giant Universal flush-mounting measuring instruments of the UMG 96S product family are mainly designed for use in low and medium voltage distribution
More informationvacon nx ac drives brake chopper unit (bcu) application user s manual
vacon nx ac drives brake chopper unit (bcu) application user s manual 2 vacon Introduction Vacon Brake Chopper Unit application INDEX Document code: DPD01565A Software code: ABFIFF01V113 Date: 27.3.2014
More informationMedium Voltage Metal-Enclosed Thyristor-Switched Harmonic Filter Banks
66 Carey Road Queensbury, NY 12804 Ph: (518) 792-4776 Fax: (518) 792-5767 www.nepsi.com sales@nepsi.com Medium Voltage Metal-Enclosed Thyristor-Switched Harmonic Filter Banks General NEPSI's activar, Medium
More informationBus Bar Protection Relay B-PRO 4000
Bus Bar Protection Relay B-PRO 4000 Product Overview The IEC 61850 station bus embedded B-PRO 4000 relay provides complete bus and substation differential protection (low impedance) with CT saturation
More informationEM6400 series Multi-Function meters
6400 series Multi-Function meters 1 Digital display & Analog load bar indicators 2 Bright Red LED display 3 Global: CE, UL marks 4 Universal Demand Monitoring Quick and easy installation Turbo Key 6400
More informationSLI 15 INVERTER SERIES, 1500 W
SLI 15 INVERTER SERIES, 1500 W FEATURES DESCRIPTION New, compact design: 1U height x 19" width x 14.94" depth; 19" rack-mountable High efficiency: up to 93% True sine wave output Parallelable output with
More informationPOWER METER HC Features
Introduction The power quality meter HC 6030 is an ideal device to power monitoring in power quality when continuous monitoring to a power system is required. The HC 6030 provides metering for current,
More informationDIGITAL RELAY OF PROTECTION AND AUTOMATION SERIES PC83 AND PC830
DIGITAL RELAY OF PROTECTION AND AUTOMATION SERIES PC83 AND PC830 PC83 and PC830 series devices are designed to perform the relay protection functions and 6-154 kv networks automation, have different functionality
More informationPROTECTION RELAYS THE ULTRA LINE NUMERICAL MULTIFUNCTION INTELLIGENT DEVICE FOR PROTECTION, SUPERVISION, METERING AND CONTROL
MICROPROCESSOR PROTECTION RELAYS THE ULTRA LINE NUMERICAL MULTIFUNCTION INTELLIGENT DEVICE FOR PROTECTION, SUPERVISION, METERING AND CONTROL MICROELETTRICA SCIENTIFICA MANUFACTURES A COMPLETE RANGE OF
More informationEDR-3000 Eaton Distribution Relay
EDR-3000 Eaton Distribution Relay Technical Data New Information Description Page 1. General Description.......................... 2 2. Applications............................... 2 3. Drilling Pattern.............................
More informationSLI 15 Inverter Series Data Sheet 1500 Watt, 1U Compact Inverters
Applications Telecom IT Industrial Safety in compliance with IEC60950:1999, 3 rd edition; EN60950:2000; UL60950, 3 rd edition; CSA Standard C22.2 No.60950-00, 3 rd edition Features New, compact design:
More informationGE Power Management. MMII Intelligent MCC Controller
A concept that will offer reduced overall installed cost and production efficiency through information availability to operators and maintenance. Presentation Overview 6 Applications 6 Protection and Control
More informationMeasurement and Control CVM-A1500. Power analyzer with power quality. Quality in every sense of the word. Technology for energy efficiency
Measurement and Control CVM-A1500 Power analyzer with power quality Quality in every sense of the word Technology for energy efficiency Your network quality, at a glance The CVM-A1500 records power quality
More information7SR242 Duobias Multi-Function 2-Winding Transformer Protection Relay
7SR242 Duobias Multi-Function 2-Winding Transformer Protection Relay Document Release History This document is issue 2010/06. The list of revisions up to and including this issue is: 2010/06 Additional
More informationMIN II. Complete numerical ground directional protection. Digital Energy Multilin. Protection and Control. Monitoring and Metering.
MIN II Key Benefits Reduce troubleshooting and maintenance cost - event recording, and analogy/digital oscillography Design flexibility - Easy to use programming logic Access to information - Modbus RTU
More informationResidual overvoltage relay
Page 1 Issued: April 1999 Status: New Data subject to change without notice Features Definite-time residual overvoltage earthfault protection and supervision Two independent operation stages, e.g. one
More informationGRD110 FEATURES APPLICATION
FEATURES Overcurrent protection for phase and earth faults with IDMTL or DTL. Three instantaneous elements with DTL. Programmable reset characteristics. Sensitive earth fault protection (SEF). Restricted
More informationBus Protection Application Challenges
Bus Protection Application Challenges KN Dinesh Babu - Megger JC Theron, Lubomir Sevov GE Grid Solutions 2017 Texas A&M Protective Relay Conference Content Introduction Application Challenges Increase
More informationRT4F-120V/20A-WAC RECTIFIER
The RT4F-120V/20A-WAC is a switched mode rectifier/charger module designed to provide up to 20A of output current into a 120V nominal system. This charger has been designed for use in conjunction with
More informationRT4F-110V/25A RECTIFIER
The RT4F-110V/25A is a hot-pluggable switched mode rectifier (SMR) module designed to provide up to 25A of output current into a 110V nominal system. Examples of such systems are 60 cells lead acid (136V
More informationBus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection
SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential
More informationReyrolle Protection Devices. 7SG118 Argus 8 Voltage & Frequency Relay. Answers for energy
Reyrolle Protection Devices 7SG118 Argus 8 Voltage & Frequency Relay Answers for energy 7SG118 Argus 8 Voltage and Frequency Relay Data Storage and Communication Serial communications conform to IEC60870-5-103
More informationGenerator Management Relay COMMUNICATIONS GUIDE
Title Page g GE Industrial Systems 489 Generator Management Relay COMMUNICATIONS GUIDE Software Revision: 3.00 GE Publication Code: GEK-106495A Part Number: 1601-0149-A2 Copyright 2004 215 Anderson Avenue,
More informationRemote communication options include IEC Ethernet communications or Modbus (RS485).
2019 The MELPRO D series relay is suitable for feeder protection, motor protection and transformer protection applications. The relay offers multiple step time grading for over-current protection co-ordination.
More informationBus Differential and Breaker Failure Relay. Advanced bus protection with built-in breaker failure detection
SEL-487B Bus Differential and Breaker Failure Relay Advanced bus protection with built-in breaker failure detection Protect busbars with up to 21 terminals using high-speed, low-impedance bus differential
More informationSmart Energy & Power Quality Solutions. UMG 505 Power analysis, LON and I/O-Vielfalt
Smart Energy & Power Quality Solutions UMG 505 Power analysis, LON and I/O-Vielfalt UMG 505 UMG 505 Power analysis, LON and I/O-Vielfalt Power analysers of the UMG505 product family are mainly designed
More informationMIC-2 MKII, Multi-instrument DATA SHEET
MIC-2 MKII, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationRT12-240V/2.4kW Rectifier Specification
The RT12-240V/2.4kW is a switched mode rectifier (SMR) module that delivers up to 2.4kW of output power (and up to 11A output current) into a 240V nominal DC system. The RT12 suits AC supply voltages between
More informationNo actual trip output occurs if the upper paddle is removed first.
BE1-27/59 SCOPE This test procedure covers the testing of the Basler BE1-27/59 under/overvoltage relay. Refer to IM 9170600990 Rev. L (12/12) for testing support information and component level identification.
More informationA0750 AC-DC POWER MODULE
FEATURES High power density, 7.7W / in³ Net Weight:< 2.2 KG Low profile : 40.8mm (fit 1U 19 shelf R2250 series) Efficiency: 77% ~ 86 % typical Power factor correction (meet IEC1000-3-2 requirements) Overvoltage
More informationU niversal Measuring Device NEW! UMG 96 S. Little Fieldbus Giant. Modbus / Profibus. Harmonics. Memory. Analogue outputs.
U niversal Measuring Device NEW! Little Fieldbus Giant Modbus / Profibus Harmonics Memory Analogue outputs Digital I/O Modem Recorder Profibus Modbus PC I/O Universal Measuring Device Application Application
More informationPower Test Equipment
Power Test Equipment for the global power industry T&R Test Equipment design and manufacture high quality test equipment for the power industry. Our equipment is used world-wide in transmission and distribution,
More informationProtection Relays PHASE & RESIDUAL OVERCURRENT
Protection Relays PHASE & RESIDUAL OVERCURRENT Application The relay type NA016 can be used in radial networks as feeder or power transformer protection. In solidly grounded systems the residual overcurrent
More informationRT4F-48V/50A-WAC RECTIFIER
The RT4F-48V/50A-WAC is a switched mode rectifier (SMR) module designed to provide up to 58A of output current into a 48V nominal system, over a wide range of AC input voltage. This rectifier has been
More informationProtect induction and synchronous motors with one relay
SEL-710-5 Motor Protection Relay Protect induction and synchronous motors with one relay Patented, accurate thermal protection improves motor availability for production. The 5-inch, 800 480 color touchscreen
More informationMPSC Microprocessor-based protection and metering devices for low voltage power circuit breakers. ABB Power Distribution
MPSC-2000 Microprocessor-based protection and metering devices for low voltage power circuit breakers ABB Power Distribution Introduction For circuit breaker protection, metering and communications, the
More information* A8* GE Grid Solutions. Generator Management Relay COMMUNICATIONS GUIDE
GE Grid Solutions 489 Generator Management Relay COMMUNICATIONS GUIDE Software Revision: 4.0x GE Publication Code: GEK-106495H GE Multilin Part Number: 1601-0149-A8 Copyright 2017 GE Multilin Inc. GE Grid
More informationGRE130. Protection and Control for MV Systems
Protection and Control for MV Systems FEATURES Phase undervoltage protection with IDMTL or DTL(27). Phase overvoltage protection with IDMTL or DTL(59). Zero phase sequence overvoltage (neutral voltage
More information750/760 Feeder Management Relay
g GE Industrial Systems 750/760 Feeder Management Relay Instruction Manual Firmware Rev: 5.X Manual P/N: 1601-0044-AP (GEK-106293D) Copyright 2006 GE Multilin 760 STATUS SYSTEM STATUS OUTPUT STATUS RELAY
More informationDTRV-EP. COMPLEX DIGITAL PROTECTION FOR 120 kv / MEDIUM VOLTAGE TRANSFORMERS. Application field
DTRV-EP COMPLEX DIGITAL PROTECTION FOR 120 kv / MEDIUM VOLTAGE TRANSFORMERS Application field The DTRV type of complex transformer protection is designed to protect 120 kv / medium voltage transformers,
More informationDRTS 3 PLUS. Advanced Protection Relay Test Set and Measurement System. DRTS 3 PLUS has been designed to test:
Advanced Protection Relay Test Set and Measurement System Multi-tasking equipment designed for testing protection relays, energy meters, transducers Particularly designed to test RTU (remote terminal unit)
More informationBE1-50/51M TIME OVERCURRENT RELAY ADVANTAGES
BE1-50/51M TIME OVERCURRENT RELAY The BE1-50/51M Time Overcurrent Relay provides economical overload and fault protection for generators, transformers, lines and motors. ADVANTAGES Self powered from 50/60Hz
More informationFM2. Economical and compact feeder protection for low voltage feeders. Digital Energy Multilin. Monitoring & Metering. Protection and Control
Key Benefits FM2 FEEDER Protection System Economical and compact feeder protection for low voltage feeders Comprehensive low voltage feeder management system - Integrated feeder protection and process
More informationPLT. Breaker-based transfer switch open, closed or soft transition amps. Specification sheet
Specification sheet PLT Breaker-based transfer switch open, closed or soft transition 800 3000 amps Description PLT breaker-based transfer switches are designed for operation and switching of electrical
More informationBE1-51 BE1-51/27C BE1-51/27R TIME OVERCURRENT RELAY
BE1-51 BE1-51/27C BE1-51/27R TIME OVERCURRENT RELAY The BE1-51 Series of Time Overcurrent Relays is microprocessor-based to provide versatile overload and fault protection on 50Hz or 60Hz systems. ADVANTAGES
More informationGRE160. Transformer Protection
Transformer Protection FEATURES Fully numerical transformer protection Current differential protection for two-winding transformers with inrush restraint (87T) High-set differential overcurrent protection
More informationREL52002 Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: V, DI: V, RS-485
Characteristics Easergy P3U30, 4L, 4U, 16DI/8DO, Uaux: 48-230V, DI: 220-230V, RS-485 Main Range of product Product or component type Relay application Device short name [Us] rated supply voltage Type of
More informationInstallation & Operation and Maintenance
Gas Safety Products Dual Current Monitor Installation & Operation and Maintenance Read these instructions carefully before operating or servicing Rev: 01 Date: 12-02-18 1 CONTENTS Chapter Content Page
More informationSingle-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
70 Series - Line monitoring relay 70 Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring
More informationSubstation Automation Products. Generator protection REG670/650 Relion 670 and 650 series
Substation Automation Products Generator protection REG670/650 Relion 670 and 650 series A new protection standard for your valuable assets Based on ABB s extensive experience, REG670 and REG650 IEDs (Intelligent
More informationOptidrive VTC Modbus RTU Register Map
Application Note AN-VTC- 39 Optidrive VTC Modbus RTU Register Map Author: Ning Xu, Invertek Drives Ltd Revision: 2.21 6 September 2006 General This document details the Modbus RTU memory mapping implemented
More information