IBM System Storage N5500 adds new software features

Transcription

1 Hardware Announcement February 28, 2006 IBM System Storage N5500 adds new software features Overview The N5500 has new features that are designed to help complete the N5500 portfolio, and to add function. These features include: Partially populated expansion units The N5500 now supports attachment of EXN1000 and EXN2000 expansion units that are not fully populated. SnapManager for SQL This feature adds SnapManager support for Microsoft SQL servers. SnapManager for Exchange This feature adds SnapManager support for Microsoft Exchange servers. Single Mailbox (SMBR) These features add advanced function to the SnapManager for Exchange feature. Fibre Channel host attach kits These features are designed to improve host-side Fibre Channel attachment to HP-UX and Solaris hosts. Key prerequisites The IBM System Storage N5500 requires FCP, NFS, CIFS, or iscsi protocol function on one or more host N5500 filers. Planned availability dates March 17, 2006, except for support for fewer than 14 drives in an expansion unit, SnapManager for Exchange, and Single Mailbox April 7, 2006, for fewer than 14 drives in expansion units April 21, 2006, for SnapManager for Exchange and SMBR At a glance The IBM TotalStorage N5500 has new features, providing additional function and a broader array of licensed function. IBM is adding the following functional support to the N5500: Partially populated expansion units SnapManager for SQL SnapManager for Exchange SnapDrive for HP-UX and Solaris Single Mailbox (SMBR) Fiber Channel host attach kits for HP-UX and Solaris For ordering, contact: Your IBM representative, an IBM Business Partner, or the Americas Call Centers at 800-IBM-CALL Reference: YE001 This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States IBM is a registered trademark of International Business Machines Corporation

2 Description The N5500 filers now support attachment of EXN1000 and EXN2000 expansion units with configurations of fewer than 14 disk drives. The initial order for an N5500 and any expansion unit must include no more than two drive types (rotational speed, capacity, and drive interface [FC or SATA]) to be attached to the N5500 filer. Additional drive types may be added later, to an installed N5500 system, resulting in more than two types on the system. All of the licensed functions necessary to support the Fibre Channel Protocol (FCP) on HP-UX and Solaris are also now supported for the N5500. These include SnapDrive for HP-UX and Solaris. All necessary host attach kits for these platforms are also available. Other licensed functions for the N5500, now available, include Disk Sanitization, SnapManager for SQL, SnapManager for Exchange, and Single Mailbox (SMBR). Disk Sanitization is a no-cost, licensed solution that is designed to allow physical removal of all data on one, or more, physical disk drives in a manner that prevents recovery of that data by known recovery methods. SnapManager for SQL is designed to help reduce backup and restore times of SQL databases by using backups based upon snapshot copies. It is designed to allow simultaneous backup of multiple databases and using minimal disk space for each additional full backup. SnapManager for Exchange is designed to help streamline storage management while simplifying configuration, backup, and restore operations for Microsoft Exchange databases. Single Mailbox is designed to work with SnapManager for Exchange, and restore individual mail items from any recent (hourly, daily, or weekly) snapshot. This helps allow rapid search of archived snapshot copies of previously deleted messages that are no longer in the current mailbox. Single Mailbox also includes ards for Microsoft NT Backup, VERITAS Backup Exec, and, optionally, ards for CA BrightStor ARCserve, Legato NetWorker, and VERITAS Net Backup. The ards are designed to restore both private and public exchange information and stored data from tape or disk backups to any alternate location (machine, volume, or folder), thereby helping eliminate the need for a recovery server. Hardware Announcement , dated November 8, 2005, function authorizations establish authorization for use of licensed functions on IBM TotalStorage N series machines Hardware Announcement , dated February 28, 2006, function authorization Business Partner information If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID). BP Attachment for Announcement Letter mem/sla.jsp?num= Trademarks System Storage is a trademark of International Business Machines Corporation in the United States or other countries or both. TotalStorage, AIX, and Tivoli are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Microsoft is a trademark of Microsoft Corporation. UNIX is a registered trademark of the Open Company in the United States and other countries. Linux is a trademark of Linus Torvalds in the United States, other countries or both. Other company, product, and service names may be trademarks or service marks of others. Section 508 of the U.S. Rehabilitation Act The IBM System Storage N5500 is capable, as of March 17, 2006, when used in accordance with IBM s associated documentation, of satisfying the applicable requirements of Section 508 of the Rehabilitation Act, provided that any assistive technology used with the product properly interoperates with it. A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) can be requested via IBM s Web site at product_accessibility/index.html Refer to: Reference information Hardware Announcement , dated November 8, 2005, IBM System Storage N5500 offers midrange Network Attached Storage

3 IBM United States Announcement Supplemental Information February 28, 2006 Feature descriptions Licensed function features Licensed functions are authorized at the 2865 system level. Only one feature is required per 2865 system, regardless of the physical capacity within the 2865 system or the number of attached expansion units. The following additional licensed functions are available on the N5500 Models A10 and A20 as optional features: Model Model A10 A20 feature feature Description Disk Sanitization SnapManager/Exchange Filer SnapManager/SQL Filer SnapDrive AIX SnapDrive AIX SnapDrive AIX SnapDrive AIX SnapDrive HP-UX SnapDrive HP-UX SnapDrive HP-UX SnapDrive HP-UX SnapDrive Solaris 1-2 Proc SnapDrive Solaris 3-4 Proc SnapDrive Solaris 5-8 Proc SnapDrive Solaris SnapDrive Linux SnapDrive Linux SnapDrive Linux SnapDrive Linux SnapDrive for UNIX Media Kit FCP Host Attach Kit HP-UX FCP Host Atch Kit Solaris SnapManager/Exchange Host SnapManager/Exch Media Kit SnapManager for SQL Host SnapManager/SQL Media Kit Single Mbox 100pk Single Mbox 500pk Single Mbox 1000pk Single Mbox 2500pk Single Mbox 5K pk Single Mbox 10K pk Single Mbox 50K pk Single Mbox Med Kt SMBR CA-ARCSERVE SMBR Tivoli Tape SMBR Legato Tape SMBR NetBackup SMBR PST Tape SMBR HP Licensed function indicators (#7418 and #7470) Disk Sanitization: This feature enables the Disk Sanitization licensed function subject to the client applying a feature activation code made available by IBM. This feature is also used for maintenance billing purposes. The corequisite IBM 2870 feature number must be purchased to establish authorization for use of the Disk Sanitization licensed function before the feature activation code is provided by IBM. (#7419 and #7471) SnapManager/Exchange Filer: This feature enables the SnapManager/Exchange Filer licensed function subject to the client applying a feature activation code made available by IBM. This feature is also used for maintenance billing purposes. This feature allows connection of any number of exchange servers to a filer. The corequisite IBM 2870 feature number must be purchased to establish authorization for use of the SnapManager/Exchange Filer licensed function before the feature activation code is provided by IBM. (#7420 and #7472) SnapManager/SQL Filer: This feature enables the SnapManager/SQL Filer licensed function subject to the client applying a feature activation code made available by IBM. This feature is also used for maintenance billing purposes. This feature allows connection of any number of SQL servers to a filer. The corequisite IBM 2870 feature number must be purchased to establish authorization for use of the SnapManager/SQL Filer licensed function before the feature activation code is provided by IBM. SnapDrive for AIX Host software These features provide a software application designed to enhance the storage management capabilities in an AIX environment, including easier management of dynamic volume, cluster, snapshot, and replication management. One feature must be ordered for each host on which it will be installed. Note: Use of these features with FCP attachment requires the FCP Protocol (#7417 or #7469) on the N5500, as well as the corequisites, feature numbers 8110 and Note: If running with iscsi, the iscsi Host Support Kit is required. The iscsi Host Support Kit is available for download from (#8000) SnapDrive AIX 1-2 : This feature enables SnapDrive for AIX support for a single host with one or two processors. This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: IBM United States IBM is a registered trademark of International Business Machines Corporation

4 (#8001) SnapDrive AIX 3-4 : This feature enables SnapDrive for AIX support for a single host with three or four processors. (#8002) SnapDrive AIX 5-8 : This feature enables SnapDrive for AIX support for a single host with five to eight processors. (#8003) SnapDrive AIX 9+ : This feature enables SnapDrive for AIX support for a single host with nine or more processors. SnapDrive for HP-UX These features provide a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier management of dynamic volume, cluster, snapshot, and replication management. One feature must be ordered for each host on which it will be installed. Note: Use of these features with FCP attachment requires the FCP Protocol (#7417 or #7469) on the N5500, as well as the corequisite, feature number Note: If running with iscsi, the iscsi Host Support Kit is required. The iscsi Host Support Kit is available for download from (#8004) SnapDrive HP-UX 1-2 : This feature enables SnapDrive for HP-UX support for a single host with one or two processors. (#8005) SnapDrive HP-UX 3-4 : This feature enables SnapDrive for HP-UX support for a single host with three or four processors. (#8006) SnapDrive HP-UX 5-8 : This feature enables SnapDrive for HP-UX support for a single host with five to eight processors. (#8007) SnapDrive HP-UX 9+ : This feature enables SnapDrive for HP-UX support for a single host with nine or more processors. SnapDrive for Solaris These features provide a software application designed to enhance the storage management capabilities in a Solaris environment, including easier management of dynamic volume, cluster, snapshot, and replication management. One feature must be ordered for each host on which it will be installed. Note: Use of these features with FCP attachment requires the FCP Protocol (#7417 or #7469) on the N5500, as well as the corequisite, feature number Note: If running with iscsi, the iscsi Host Support Kit is required. The iscsi Host Support Kit is available for download from (#8008) SnapDrive Solaris 1-2 Proc: This feature enables SnapDrive for Solaris support for a single host with one or two processors. (#8009) SnapDrive Solaris 3-4 Proc: This feature enables SnapDrive for Solaris support for a single host with three or four processors. (#8010) SnapDrive Solaris 5-8 Proc: This feature enables SnapDrive for Solaris support for a single host with five to eight processors. (#8011) SnapDrive Solaris 9+ : This feature enables SnapDrive for Solaris support for a single host with nine or more processors. SnapDrive for Linux These features provide a software application designed to enhance the storage management capabilities in an Linux environment, including easier management of dynamic volume, cluster, snapshot, and replication management. One feature must be ordered for each host on which it will be installed. These features are supported only for iscsi; they are not supported for Fibre Channel Protocol. iscsi Host Support Kits must be installed on the N5500. The iscsi Host Support Kit is available for download from (#8020) SnapDrive Linux 1-2 : This feature enables SnapDrive for Linux support for a single host with one or two processors. (#8021) SnapDrive Linux 3-4 : This feature enables SnapDrive for Linux support for a single host with three or four processors. (#8022) SnapDrive Linux 5-8 : This feature enables SnapDrive for Linux support for a single host with five to eight processors. (#8023) SnapDrive Linux 9+ : This feature enables SnapDrive for Linux support for a single host with nine or more processors. (#8040) SnapDrive for UNIX Media Kit: This feature provides a physical media kit that includes SnapDrive for Linux, Solaris, AIX, and HP-UX. (#8121) FCP Host Atch Kit HP-UX: These features provide a software application designed to enhance the storage management capabilities in an HP-UX environment, including easier management of dynamic volume, cluster, snapshot, and replication management. One feature must be ordered for each host on which it will be installed. (#8122) FCP Host Atch Kit Solaris: These features provide a software application designed to enhance the storage management capabilities in a Solaris environment, including easier management of dynamic volume, cluster, snapshot, and replication management. One feature must be ordered for each host on which it will be installed. (#8131) SnapManager/Exchange Host: This feature allows connection of one exchange host server to a filer. One of this feature is required for each exchange host. The Fibre Channel Protocol feature or iscsi must be installed on the attached filer. (#8132) SnapManager/Exch Media Kit: This feature provides the physical media kit for SnapManager for Exchange. Only one media kit is needed for a single SnapManager for Exchange Filer or Host license. Customers may order more than one, but a single media kit may be installed on multiple hosts or filers. (#8141) SnapManager for SQL Host: This feature allows connection of one SQL host server to a filer. One of this feature is required for each SQL host. The Fibre Channel Protocol feature or iscsi must be installed on the attached filer

5 (#8142) SnapManager/SQL Media Kit: This feature provides the physical media kit for SnapManager for SQL. Only one media kit is needed for a single SnapManager for SQL Filer or Host license. Customers may order more than one, but a single media kit may be installed on multiple hosts or filers. Single Mailbox (SMBR) SMBR for Microsoft Exchange software can help provide rapid recovery of single mailboxes, individual folders, or single messages from a valid SnapManager backup to the production Exchange server, to any off-line Exchange server, or an Outlook.pst file. The software can help save time and money by avoiding the need for cumbersome and disk-intensive brick level backups or investments in a dedicated recovery server infrastructure. (#8150) SMBR 100 pk: This feature provides support for 100 mailboxes. (#8151) SMBR 500 pk: This feature provides support for 500 mailboxes. (#8152) SMBR 1000 pk: This feature provides support for 1,000 mailboxes. (#8153) SMBR 2500 pk: This feature provides support for 2,500 mailboxes. (#8154) SMBR 5K pk: This feature provides support for 5,000 mailboxes. (#8155) SMBR 10K pk: This feature provides support for 10,000 mailboxes. (#8156) SMBR 50K pk: This feature provides support for 50,000 mailboxes. (#8157) SMBR Med Kt: This feature provides the physical media kit for SMBR. Only one media kit is needed for a single SMBR license. Customers may order more than one, but a single media kit may be installed on multiple Exchange Hosts. (#8158) SMBR CA-ARCSERVE : The CA-ARCSERVE ard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, eliminating the need for a recovery server. (#8159) SMBR Tivoli Tape : The Tivoli extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, eliminating the need for a recovery server. exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, eliminating the need for a recovery server. (#8163) SMBR HP : The HP extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, eliminating the need for a recovery server. Configuration indicators Feature numbers 9557, 9558, and 9559 must be specified to verify that sufficient Fibre Channel ports (and sufficient FC HBA for Disk, Dual-port adapters, #1004) are included in the initial order for an N5500 filer. For an N5500 Model A10, the maximum number of feature number 9557 that may be specified is four and the total of feature numbers 9558 and 9559 may not exceed four. For an N5500 Model A20, the maximum number of feature number 9557 that may be specified is eight and the total of feature numbers 9558 and 9559 may not exceed eight. (#9557) Number of FC Target Ports: This no-charge feature specifies the number of onboard Fibre Channel ports that are to be configured as FCP target ports. FCP target ports are used for Fibre Channel attachment of the N5500 to application servers (containing Fibre Channel HBAs) or to Fibre Channel SANs. This feature is only relevant if you intend to use the Fibre Channel Protocol feature on the N5500. For an N5500 Model A10, valid choices are 0, 2, and 4. For a Model A20, valid choices are 0, 4, and 8. (#9558) Number of FC Storage Loops: This no-charge feature specifies, on the initial order of an N5500 filer, the number of dual-path Fibre Channel storage loops that are to be configured for the attachment of EXN2000 storage expansion units. The EXN2000 expansion units, included in the initial order, will be distributed across the specified number of storage loops. (#9559) Number of SATA Storage Loops: This no-charge feature specifies, on the initial order of an N5500 filer, the number of dual-path Fibre Channel storage loops that are to be configured for the attachment of EXN1000 SATA storage expansion units. The EXN1000 expansion units, included in the initial order, will be distributed across the specified number of storage loops. Publications The following publications are shipped with the product. Additional copies will be available immediately. (#8160) SMBR Legato Tape : The Legato extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, eliminating the need for a recovery server. (#8161) SMBR NetBackup : The NetBackup extract wizard is designed to restore both private and public exchange information, and stored data, from tape and disk backups, to any alternate location, for example, machine, volume, or folder, eliminating the need for a recovery server. (#8162) SMBR PST Tape : The PST extract wizard is designed to restore both private and public Title Shipped in hardcopy: IBM System Storage N5200 and N5500 Installation and Setup Instructions IBM System Storage N5200 and N5500 Hardware and Service Guide MES/FRU Flyer Order number GC GC NA

6 Title Order number Title Order number WEEE Flyer IBM Statement of Limited Warranty NA NA IBM System Storage SuSE Enterprise Linux iscsi Commands for Support Kit 1.3 Quick Reference NA IBM Translated Safety Notices On the Web, all above, and: Software Setup Guide Error Messages and Troubleshooting Guide Software Upgrade Guide Introduction and Planning Guide GA GA GC GC GA iscsi Novell NetWare Initiator Support Kit 1.0 Setup and Configuration Guide IBM System Storage iscsi Red Hat Linux Initiator Support Kit 1.2 Setup Guide IBM System Storage Red Hat Linux iscsi Commands for Support Kit 1.2 Quick Reference IBM System Storage iscsi Red Hat Linux Support Kit 1.2 Release Notes GA NA GA Release Notes 7.1 IBM System Storage File Access and Protocols Management Guide Diagnostics Guide Storage Management Guide GA GA GC GA IBM System Storage MicroSoft Windows iscsi Commands for Support Kit 2.0 Quick Reference iscsi Microsoft Windows Initiator Support Kit 2.0 Release Notes iscsi Microsoft Windows Initiator Support Kit 2.0 Setup Guide NA GA GA Data Protection Online Backup and Guide Data Protection Tape Backup and Guide MultiStore Management Guide Network Management Guide Commands: Manual Page Reference, Volume 1 Commands: Manual Page Reference, Volume 2 Block Access Management Guide for iscsi and FCP System Administration Guide IBM System Storage iscsi SuSE Linux Initiator Support Kit 1.3 Setup Guide IBM System Storage iscsi SuSE Linux Initiator Support Kit 1.2 Release Notes GA GA GA GA GA GA GC GA GA GA NA = Not applicable All publications are available to be ordered. contact your IBM representative. The IBM Publications Center Portal applications/publications/cgibin/ pbi.cgi To order, The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge. Note that PNS subscribers most often order their publications via the Publication Center. Displayable softcopy publications: The product books are offered in displayable softcopy form. The files are available from the Web at The N5500 Quick Reference card is only available as hardcopy. Services IBM Integrated Technology Services IBM services include business consulting, outsourcing, hosting services, applications, and other technology management

7 These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-ibm offerings. IBM is your one-stop shop for IT support needs. For details on available services, contact your IBM representative or visit For details on available IBM Business Continuity and Services, contact your IBM representative or visit For details on education offerings related to specific products, visit index.html Select your country, and then select the product as the category. Technical information Specified operating environment Physical specifications IBM System Storage N5500 Width: 449 mm (17.7 in) Depth: 518 mm (24.3 in) Height: 130 mm (5.13 in) Weight: 34.0 kg (75.0 lb) To assure installability and serviceability in non-ibm industry standard racks, review the installation planning information for any product specific installation requirements. Standards Safety EN 60950: 2000 CE Mark (EU) UL CSA CB IEC Ed.3 (worldwide) EN : 1994+A11 IRAM GOST-R EMC FCC Class A EN55022: 1998 EN EN CE ACA C-Tick VCCI Immunity EN55024: 1998 Operating environment Temperature: Maximum range: 10 to 40 C (50 to 104 F) Recommended: 20 to 25 C (68 to 77 F) Non-operating: -40 to 65 C (-40 to 149 F) Relative humidity: Recommended operating range: 40% to 55% Maximum wet bulb: 28 C Maximum altitude: 3,050 m (10,000 ft.) Note: Operating at extremes of environment may increase risk of failure. Wet bulb (Caloric Value): 1,215 Btu/hr (fully loaded shelf) Maximum electrical power: V ac, 10-5A, Hz Nominal electrical power: 100 to 120 V ac, 4 A; 200 to 240 V ac, 2 A Noise level: C C Hardware requirements Licensed Machine Code (LMC) The N5500 requires LMC level 7.1.0, or later. Some N5500 features and functions may not be available or supported in all environments. Current information on supported environments, prerequisites, and minimum operating systems levels is available at Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance. Licensed functions The following licensed function is required on the N5500: DataONTAP (#7400 or #7450) Licensed functions require the selection of N5500 Model A10 or A20 features and the acquisition of the corresponding IBM 2870 Model 651 or 652 function authorization features. Software requirements: Current information on servers, operating systems, host adapters, and connectivity products supported by the N5500 is available at Limitations The N5500 is supported only in rack installations. This product is functional with the IBM iseries and OpenPower platforms. However, on the iseries, support is only available on Power Linux and AIX partitions, not i5os. Current license terms for the machine code provided with this product prohibit transfer of the machine code without approval from Network Appliance. Planning information Customer responsibilities: In order to follow good safety practice, IBM recommends that two or more persons install this product

8 Physical configuration and installation planning for the 2865 is a customer responsibility. Information about physical configuration and installation requirements, including equipment, site, and power requirements, can be found in the Installation and Setup Instructions for the IBM TotalStorage N5500 (GA ). A customer-supplied Ethernet cable is required to connect the machine to a server or Ethernet network. Cable orders: Fibre Channel cables are required to connect an expansion unit to a 2865 system. Cables can be purchased using expansion unit features. For the two-node Model A20, cables are required to connect the nodes. Installability: Estimated time to unpack an IBM System Storage N5500, install it in the rack, and perform a simple discovery and configuration is one hour. Packaging Number Product Shipment group of boxes 2865-A10 Model A10 base 1 unit, LMC, and rackmount kit (as ordered) Security, auditability, and control This product uses the security and auditability features of host hardware, host software, and/or application software to which it is attached. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Terms and conditions MES discount applicable: Equal to the volume commitment discount Field installable feature: Yes Warranty period: Three years Customer setup: Yes Machine code: base machine Same license terms and conditions as 2865-A20 Model A20 base 2 unit, LMC, and rackmount kit (as ordered) Prices Machine Feature Purchase Description type Model number price Licensed function indicators Disk Sanitization 2865 A $0 SnapManager/Exchange Filer 2865 A SnapManager/SQL Filer 2865 A Disk Sanitization 2865 A SnapManager/Exchange Filer 2865 A SnapManager/SQL Filer 2865 A SnapDrive AIX A10, A SnapDrive AIX A10, A SnapDrive AIX A10, A SnapDrive AIX A10, A SnapDrive HP-UX A10, A SnapDrive HP-UX A10, A SnapDrive HP-UX A10, A SnapDrive HP-UX A10, A SnapDrive Solaris 1-2 Proc 2865 A10, A SnapDrive Solaris 3-4 Proc 2865 A10, A SnapDrive Solaris 5-8 Proc 2865 A10, A SnapDrive Solaris A10, A SnapDrive Linux A10, A SnapDrive Linux A10, A SnapDrive Linux A10, A SnapDrive Linux A10, A SnapDrive for UNIX Media Kit 2865 A10, A FCP Host Attach Kit HP-UX 2865 A10, A FCP Host Atch Kit Solaris 2865 A10, A SnapManager/Exchange Host 2865 A10, A SnapManager/Exch Media Kit 2865 A10, A SnapManager/SQL Host 2865 A10, A

9 Machine Feature Purchase Description type Model number price SnapManager/SQL Media Kit 2865 A10, A $0 Single Mbox 100 pk 2865 A10, A Single Mbox 500 pk 2865 A10, A Single Mbox 1000 pk 2865 A10, A Single Mbox 2500 pk 2865 A10, A Single Mbox 5K pk 2865 A10, A Single Mbox 10K pk 2865 A10, A Single Mbox 50K pk 2865 A10, A Single Mbox Med Kt 2865 A10, A SMBR CA-ARCSERVE 2865 A10, A SMBR Tivoli Tape 2865 A10, A SMBR Legato Tape 2865 A10, A SMBR NetBackup 2865 A10, A SMBR PST Tape 2865 A10, A SMBR HP 2865 A10, A Power Cord, Taiwan 250V 2865 A10, A Num. of FC Target Ports 2865 A10, A NC Num. of FC Storage Loops 2865 A10, A NC Num. of SATA Storage Loops 2865 A10, A NC NC = No charge Machine type/model/ Plant/ feature Field MES Cabl Description number install removal req. CSU 1 Disk Sanitization 2865/A10/7418 Both 2 N N Y SnapManager/ 2865/A10/7419 Both 2 N N Y Exchange Filer SnapManager/ 2865/A10/7420 Both 2 N N Y SQL Filer SnapDrive 2865/A10/8000 Both N N Y AIX 1-2 SnapDrive 2865/A10/8001 Both N N Y AIX 3-4 SnapDrive 2865/A10/8002 Both N N Y AIX 5-8 SnapDrive 2865/A10/8003 Both N N Y AIX 9+ SnapDrive 2865/A10/8004 Both N N Y HP-UX 1-2 SnapDrive 2865/A10/8005 Both N N Y HP-UX 3-4 SnapDrive 2865/A10/8006 Both N N Y HP-UX 5-8 SnapDrive 2865/A10/8007 Both N N Y HP-UX 9+ SnapDrive 2865/A10/8008 Both N N Y Solaris 1-2 Proc SnapDrive 2865/A10/8009 Both N N Y Solaris 3-4 Proc SnapDrive 2865/A10/8010 Both N N Y Solaris 5-8 Proc SnapDrive 2865/A10/8011 Both N N Y Solaris 9+ SnapDrive 2865/A10/8020 Both N N Y Linux

10 Machine type/model/ Plant/ feature Field MES Cabl Description number install removal req. CSU 1 SnapDrive 2865/A10/8021 Both N N Y Linux 3-4 SnapDrive 2865/A10/8022 Both N N Y Linux 5-8 SnapDrive 2865/A10/8023 Both N N Y Linux 9+ SnapDrive for 2865/A10/8040 Both N N Y UNIX Media Kit FCP Host Attach 2865/A10/8121 Both N N Y Kit HP-UX FCP Host Atch 2865/A10/8122 Both N N Y Kit Solaris SnapManager/ 2865/A10/8131 Both N N Y Exchange Host SnapManager/ 2865/A10/8132 Both N N Y Exch Media Kit SnapManager for 2865/A10/8141 Both N N Y SQL Host SnapManager/ 2865/A10/8142 Both N N Y SQL Media Kit Single Mbox 2865/A10/8150 Both N N Y 100 pk Single Mbox 2865/A10/8151 Both N N Y 500 pk Single Mbox 2865/A10/8152 Both N N Y 1000 pk Single Mbox 2865/A10/8153 Both N N Y 2500 pk Single Mbox 2865/A10/8154 Both N N Y 5K pk Single Mbox 2865/A10/8155 Both N N Y 10K pk Single Mbox 2865/A10/8156 Both N N Y 50K pk Single Mbox 2865/A10/8157 Both N N Y Med Kt SMBR CA-ARCSERVE 2865/A10/8158 Both N N Y SMBR Tivoli 2865/A10/8159 Both N N Y Tape Extract Wiz SMBR Legato 2865/A10/8160 Both N N Y Tape Extract Wiz SMBR NetBackup 2865/A10/8161 Both N N Y SMBR PST Tape 2865/A10/8162 Both N N Y SMBR HP Tape 2865/A10/8163 Both N N Y

11 Machine type/model/ Plant/ feature Field MES Cabl Description number install removal req. CSU 1 Power Cord, 2865/A10/9016 Plant N N Y Taiwan 250V Num. of FC 2865/A10/9557 Plant N N Y Target Ports Num. of FC 2865/A10/9558 Plant N N Y Storage Loops Num. of SATA 2865/A10/9559 Plant N N Y Storage Loops Disk Sanitization 2865/A20/7470 Both Y N Y SnapManager/ 2865/A20/7471 Both Y N Y Exchange Filer SnapManager/ 2865/A20/7472 Both Y N Y SQL Filer SnapDrive 2865/A20/8000 Both N N Y AIX 1-2 SnapDrive 2865/A20/8001 Both N N Y AIX 3-4 SnapDrive 2865/A20/8002 Both N N Y AIX 5-8 SnapDrive 2865/A20/8003 Both N N Y AIX 9+ SnapDrive 2865/A20/8004 Both N N Y HP-UX 1-2 SnapDrive 2865/A20/8005 Both N N Y HP-UX 3-4 SnapDrive 2865/A20/8006 Both N N Y HP-UX 5-8 SnapDrive 2865/A20/8007 Both N N Y HP-UX 9+ SnapDrive 2865/A20/8008 Both N N Y Solaris 1-2 Proc SnapDrive 2865/A20/8009 Both N N Y Solaris 3-4 Proc SnapDrive 2865/A20/8010 Both N N Y Solaris 5-8 Proc SnapDrive 2865/A20/8011 Both N N Y Solaris 9+ SnapDrive 2865/A20/8020 Both N N Y Linux 1-2 SnapDrive 2865/A20/8021 Both N N Y Linux 3-4 SnapDrive 2865/A20/8022 Both N N Y Linux 5-8 SnapDrive 2865/A20/8023 Both N N Y Linux 9+ SnapDrive for 2865/A20/8040 Both N N Y UNIX Media Kit

12 Machine type/model/ Plant/ feature Field MES Cabl Description number install removal req. CSU 1 FCP Host Attach 2865/A20/8121 Both N N Y Kit HP-UX FCP Host Atch 2865/A20/8122 Both N N Y Kit Solaris SnapManager/ 2865/A20/8131 Both N N Y Exchange Host SnapManager/ 2865/A20/8132 Both N N Y Exch Media Kit SnapManager for 2865/A20/8141 Both N N Y SQL Host SnapManager/ 2865/A20/8142 Both N N Y SQL Media Kit Single Mbox 2865/A20/8150 Both N N Y 100 pk Single Mbox 2865/A20/8151 Both N N Y 500 pk Single Mbox 2865/A20/8152 Both N N Y 1000 pk Single Mbox 2865/A20/8153 Both N N Y 2500 pk Single Mbox 2865/A20/8154 Both N N Y 5K pk Single Mbox 2865/A20/8155 Both N N Y 10K pk Single Mbox 2865/A20/8156 Both N N Y 50K pk Single Mbox 2865/A20/8157 Both N N Y Med Kt SMBR CA-ARCSERVE 2865/A20/8158 Both N N Y SMBR Tivoli Tape 2865/A20/8159 Both N N Y SMBR Legato Tape 2865/A20/8160 Both N N Y Extract Wiz SMBR NetBackup 2865/A20/8161 Both N N Y SMBR PST Tape 2865/A20/8162 Both N N Y SMBR HP Tape 2865/A20/8163 Both N N Y Power Cord, 2865/A20/9016 Plant N N Y Taiwan 250V Num. of FC 2865/A20/9557 Plant N N Y Target Ports Num. of FC 2865/A20/9558 Plant N N Y Storage Loops Num. of SATA 2865/A20/9559 Plant N N Y Storage Loops 1 Customer setup 2 The feature can be removed only through a feature conversion transaction. Y = Yes N = No

13 ICA maintenance IO8 next-day Machine IBM type/model/ On-site IOR feature Repair 4-hr resp. number (IOR), 9 x 5 IOR, 24 x A $ 0 $ A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A , A A A A A A A A A A A A A A A A A A A A A A A A A A A A A IO8 next-day Machine IBM type/model/ On-site IOR feature Repair 4-hr resp. number (IOR), 9 x 5 IOR, 24 x A $ 39 $ A A A A A A A A A A , A A A A A A A Feature conversion purchase price Feature conversion Feature Returned Continuous purchase From To parts maintenance price N Y $ N Y N Y 0 Order now To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner. To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU ( ). Phone: 800-IBM-CALL ( ) Fax: 800-2IBM-FAX ( ) Internet: callserv@ca.ibm.com Mail: IBM Americas Call Centers Dept. Teleweb Customer Support, 9th floor 105 Moatfield Drive North York, Ontario Canada M3B 3R1 Reference: YE001 The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products. Note: Shipments will begin after the planned availability date. Trademarks System Storage, IBMLink, iseries, and OpenPower are trademarks of International Business Machines Corporation in the United States or other countries or both. The e-business logo, AIX, Tivoli, Notes, and TotalStorage are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Microsoft and Windows are trademarks of Microsoft Corporation

14 UNIX is a registered trademark of the Open Company in the United States and other countries. Linux is a trademark of Linus Torvalds in the United States, other countries or both. Other company, product, and service names may be trademarks or service marks of others