eza.fr 1. Start-up 1.1. Starting the application 1.2. Bluetooth pairing procedure Follow us!

Transcription

1 ! Application EZA Application EZA Warning : Before starting the EZA application, make sure your power pack is on. The «ON» LED on the EZA Power Pack should be green. You can download our application on any Android device. Please go on or type «pile eza» on your Play Store. 1. Start-up 1.1. Starting the application To start the EZA application, first press the icon "EZA-droid" from the list of applications on your tablet or smartphone Bluetooth pairing procedure When starting the application, a login page appears. This page will allow you to synchronize your smartphone/tablet with your EZA Power Pack Press the "connect " button in the middle of the screen. A warning message may appear the first time the Bluetooth connection is made to your device. Press "Allow " to enable your smartphone or tablet to connect to your EZA Power Pack. 1

2 Application EZA Application EZA Mode User d emploi manual If several EZA Power Pack are near your smartphone / tablet, a list of available EZAs appears. Select the nam of your EZA Power Pack. It is recognizable by a number on a sticker on the front of your Power Pack. If only one EZA appears, select that number. A window appears. Press "Connect". A new page appears asking for a new password. The access code is available on a sticker on the back of your EZA Power Pack. It is the code on the bottom right of the label beginning with A. Type this code and press "submit". Example : Access code Back of the EZA Power Pack 2

3 Application EZA EZA Application EZA Mode User d emploi manual Your device is now linked to your EZA Power Pack. Fully charge the EZA to synchronize it so that the battery on the screen turns green. Then you can view the charging status and the performance of your EZA using the application. This first full charge must reach a voltage of 14,2V. We recommend using a special lithium charger or driving until that voltage is reached. 2. Use 2.1. The menu After carrying out the first full charge, the green battery will appear and will show the charge level of your EZA Power Pack. Pressing this icon at the top of the left of the screen shows the menu. This gives access to all the possibilities offered by the application : - Displays remaining autonomy on the "autonomy" page - Displays the instantanious load or discharge flow of your EZA Power Pack on the "use" page. - Displays support information in case of problems on the "Assistance " page. - Displays maintenance information of your EZA Power Pack on the " maintenance " page. 3

4 EZA Application Application EZA 2.2. The features Autonomy page : This page shows you : - The charge level of your EZA Power Pack (green battery). - The estimated remaining autonomy of your EZA Power Pack. - If your EZA Power Pack is at rest. - If your EZA Power Pack is charging - If your EZA Power Pack is discharging The two icons located on the left side of the screen indicate : - The correct connection of the ignition + or the D+ on your installation. Make sure this icon is on to allow the very fast recharge of your Power Pack via the engine battery when the engine is ON! If this icon is not visible, then the special connection from the EZA Power Pack to the ignition + or D+ is not correctly installed. Please contact your installer. The connection of the mains (230 Volts) to the vehicle. (This information is only available with the connection of the EZA inverter, reference MODPILCONV) Usage page : This page shows you the current charge / discharge of your EZA Power Pack. Each stream represented by a colour identical to that of the socket on the front of your EZA. Red : The charging current from your engine battery Blue : The charging via an auxiliary charger or generator (optional) Yellow : The charging current from your solar panel Black : The charging current from the vehicle s built-in 230V charger and discharge rate when using the 12V appliances in the vehicle. Grey : The discharge rate when using an invertor (optional). 4

5 Application EZA Application EZA 2.2. The features Page History : This page enables you to see the history of charging and discharging for each of the streams shown on the "usage" page. To access this information, press the coloured dot of the input or output stream you want to analyse. This icon allows you to view your data in 1h or 24h chunks. This icon updates your data. Support page : This page gives you all the relevant information in case of problems or technical questions. Tap the sub-menu button to display the contents. Maintenance page: This page allows you to manage the maintenance of your EZA Power Pack and to access the application. Here you can see : - The approximate time before the next recommended performance check of your Power Pack - The voltage of your installation. - The performance and condition of your Power Pack - The correct connection of the ignition+ and/or D+ signal. You can also change the language setting of your application. To do this, click on the appropriate flag. The icon "workshop intervention" is reserved for the installer or your EZA. This page allows him to adjust the performance characteristics your EZA Power Pack 5