Files for the workshop Machinist s files, DIN series

Transcription

1 Files for the workshop Machinist s files, DIN series PFERD produces files for the workshop with the highest quality standards. They achieve a long service life and high stock removal rates. Three application-oriented cuts are available. Consistently high stock removal rate from the tip to the tang. Long service life. Application-oriented design. Half-round and round versions with outstanding filing performance thanks to PFERD spiral cut. Recommendations for use: Choose cut for roughing or coarse stock removal. Choose cut for universal use. Choose cut 3 for fine processing and finishing. Aluminium Bronze Copper Brass Zinc Grey cast iron Steels up to,00 N/mm² Cast steel Deburring Surface work Work on edges (chamfering, rounding) PFERD files for the workshop are available in industrial packaging without or in POS packaging with ergonomic file. accessories: You can find matching ergonomic file s and other PFERD s on page 56. PFERDERGONOMICS recommends the ergonomic file for comfortable work. Hand () Rectangular file, cut on three sides, one side uncut. Version with tang. Shape A according to DIN 76. Suitable for filing rectangular geometries. 3 Industrial packaging (without ) x.5 FH H x 4.0 FH H x 5.0 FH 4/ H x 6.0 FH 4/ H x 6.5 FH 5/ H x 7.5 FH 5/ H... POS packaging (with ) x FH 3 5 PF 50 H x FH 4/ 5 PF 00 H x FH 4/ 5 PF 50 H x FH 5/ 5 PF 300 H... Page Catalogue 8

2 Flat () Rectangular file, tapered and cut on four sides. Version with tang. Shape B according to DIN 76. Suitable for filing rectangular geometries. Files for the workshop Machinist s files, DIN series 3 Industrial packaging (without ) x.5 FH H x 4.0 FH H x 5.0 FH 4/ H x 6.0 FH 4/ H x 6.5 FH 5/ H x 7.5 FH 5/ H... POS packaging (with ) x FH 3 5 PF 50 H x FH 4/ 5 PF 00 H x FH 4/ 5 PF 50 H x FH 5/ 5 PF 300 H... Three square (3) Triangular file, tapered and cut on three sides. Version with tang. Shape C according to DIN 76. Suitable for filing angular profiles. 3 Industrial packaging (without ) FH H FH H FH H FH H FH H... POS packaging (with ) FH 3 5 PF 3 50 H FH 4 5 PF 3 00 H FH 5 5 PF 3 50 H... Catalogue Page 9

3 Files for the workshop Machinist s files, DIN series Square (4) Square file, tapered and cut on four sides. Version with tang. Shape D according to DIN 76. Suitable for filing angular profiles. 3 Industrial packaging (without ) FH H FH H FH H FH H FH H... POS packaging (with ) FH 3 5 PF 4 50 H FH 4 5 PF 4 00 H FH 4 5 PF 4 50 H... Half-round (5) Half-round file, cut on two sides. Version with tang. Shape E according to DIN 76. Suitable for work on radii and for filing of half-round shapes. 3 Industrial packaging (without ) x 4.5 FH H x 6.0 FH 4/ H x 7.0 FH 4/ H x 8.5 FH 5/ H x 0.0 FH 5/ H... POS packaging (with ) x FH 3 5 PF 5 50 H x FH 4/ 5 PF 5 00 H x FH 4/ 5 PF 5 50 H x FH 5/ 5 PF H... Page Catalogue 0

4 Half-round pointed (5 SP) Half-round pointed file, cut on two sides. Version with tang. Shape E according to DIN 76. Suitable for work on radii and for filing of half-round shapes. Files for the workshop Machinist s files, DIN series 3 Industrial packaging (without ) 5 SP x.5 FH SP 00 H x 4.5 FH SP 50 H x 6.0 FH 4/ SP 00 H x 7.0 FH 4/ SP 50 H x 8.5 FH 5/ SP 300 H x 0.0 FH 5/ SP 350 H... POS packaging (with ) 5 SP x FH 3 5 PF 5 SP 50 H x FH 4/ 5 PF 5 SP 00 H x FH 4/ 5 PF 5 SP 50 H x FH 5/ 5 PF 5 SP 300 H... Round (6) Round file with circumferential cut. Version with tang. Shape F according to DIN 76. Suitable for work on radii and for filing profiles with inner radii. 3 Industrial packaging (without ) FH H FH H FH H FH H FH H FH H... POS packaging (with ) FH 3 5 PF 6 50 H FH 4 5 PF 6 00 H FH 4 5 PF 6 50 H FH 5 5 PF H... Catalogue Page

5 Files for the workshop Machinist s files, DIN series Knife files (7) Triangular file with knife profile, cut on two sides and the narrow edge. Version with tang. Shape G according to DIN 76. For work on very acute-angled and narrow geometries. 3 Industrial packaging (without ) x 5. x.5 FH H x 6.4 x.5 FH H x 7.9 x.75 FH H... PFERD-PLUS files, hand type () Rectangular file, cut on three sides, one edge uncut. Version with tang. Shape A according to DIN 76. Outstanding filing performance thanks to the special PFERD-PLUS cut. Suitable for filing rectangular geometries. Easy and energy-saving working due to spade-like filing teeth. No clogging whilst processing soft materials thanks to a wide chip breaker. Can be used universally for all hobby and DIY purposes. PLUS-cut POS packaging (with ) x 5.0 FH 4/ 5 PF PLUS x 6.0 FH 4/ 5 PF PLUS x 6.5 FH 5/ 5 PF PLUS 300 Page Catalogue

6 Machinist s files in plastic pouch WR, machinist s files in plastic pouch with cardboard box WRU Quality files for industry and trade in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file. PFERD also provides the plastic pouches with files that are 00 and 50 mm in length in attractive packaging with a transparent window. Suitable for a wide range of applications. Please specify the desired type. Available on request with matching plastic pouch to save space when stored. WR WRU = machinist s files in plastic pouch = machinist s files in plastic pouch with cardboard box Files for the workshop Machinist s files, DIN series Type Contents WR WRU H, 4 00 H, 5 00 H, 6 00 H, H H, 3 00 H, 4 00 H, 5 SP 00 H, 6 00 H H, 3 00 H, 4 00 H, 5 SP 00 H, 6 00 H H3, 3 00 H3, 4 00 H3, 5 SP 00 H3, 6 00 H H, 3 50 H, 4 50 H, 5 SP 50 H, 6 50 H H, 3 50 H, 4 50 H, 5 SP 50 H, 6 50 H H3, 3 50 H3, 4 50 H3, 5 SP 50 H3, 6 50 H H, H, H, 5 SP 300 H, H H, H, H, 5 SP 300 H, H 00 / / H, 00 H, 00 H3, 300 H, 300 H, 300 H /300 File set Quality files designed to meet the needs of DIY users in a protective cardboard box. Precise files with a high stock removal rate and a long service life. Also suitable for sharpening. Each file comes with an ergonomic file. Contents: The set consists of one file each of PF 5 VZ 00 H/, file rasp PF 5 00 H, half-round file PF VZ 00 H/, hobby file EAN PF-Set Catalogue Page 3

7 Files for the workshop Special files Hobby file () Rectangular file with different cuts on three sides. Version with tang and ergonomic file. cut on front side for roughing, single cut on back side and edge for sharpening. For roughing and sharpening using the same tool. Suitable for versatile use. steel, cast steel deburring, surface work, work on edges, sharpening, fine finishing cut /single cut POS packaging (with ) x 4.5 FH 4/ 5 PF VZ 00 H/ File rasp (5) Rectangular file with different cuts on both flat sides. Version with tang and ergonomic file. cut on front side for roughing, rasp cut on back side for rasping and one cut edge. For roughing and sharpening using the same tool. Suitable for versatile use. soft non-ferrous metal, wood, plastics, steel deburring, cutting out holes, surface work, work on edges cut /rasp cut POS packaging (with ) x 5.0 FH 4/ 5 PF 5 VZ 00 H/ Page Catalogue 4

8 Universal sharpening file () Rectangular file, tanged and single cut on two sides, with rounded, uncut narrow edges and ergonomic file. Often referred to as a lawnmower file. Suitable for sharpening cutting tools. Long tool life. High surface quality with optimum cutting performance. steel, cast steel deburring, sharpening Files for the workshop Special files Single cut POS packaging (with ) x 4.5 FH 4/ 5 PF ruk 00 H Fitter s file (6) Rectangular file with different milled cuts, tanged and with ergonomic file. Straight cut with chip breaker on front side, radial cut on back side, uncut edges. Suitable for various materials and for synthetic resin fillers or wood containing nails as well as steels up to,00 N/mm² and cast steel or for work on soldered seams. Extremely robust design. Suitable for versatile use. aluminium, soft non-ferrous metal, wood, plastics, steel, cast steel deburring, work on edges, surface work, roughing Radial /straight POS packaging (with ) x 5.3 FH 4/ 5 PF 6 50 Z/ Catalogue Page 5

9 Files for the workshop Special files Files for aluminium, hand (6 w) Rectangular file, tanged and special cut on three sides, one edge uncut. Shape A according to DIN 76. Particularly suitable for work on soft metals. Special tooth geometry prevents the file from clogging. Good surface. Labour-saving work. aluminium, soft non-ferrous metal, plastics deburring, surface work 0 6 w x 6.0 FH 4/ 0 6 w 50 H x 6.5 FH 5/ 5 6 w 300 H0 Files for aluminium, half-round (65 w) Half-round file, tanged with cut on two sides. Shape E according to DIN 76. Outstanding filing performance thanks to the PFERD spiral cut on the half-round side. Particularly suitable for work on soft metals. Special tooth geometry prevents the file from clogging. Good surface. Labour-saving work. aluminium, soft non-ferrous metal, plastics deburring, surface work 0 65 w x 7.0 FH 4/ 0 65 w 50 H x 8.5 FH 5/ 5 65 w 300 H0 Page Catalogue 6

10 Files for plastics Rectangular file, tanged and cross cut on three sides, one edge uncut. The cross cut is characterised by a particularly high stock removal rate. Also well suited to work on plastics, particularly duroplastics. Particularly high stock removal rate. Suitable for versatile use. soft non-ferrous metal, plastics deburring, work on edges Files for the workshop Special files cut x.8 FH x 3.5 FH 4/ Lathe files Rectangular file, tanged and cut on two sides, two edges uncut. Shape H according to DIN 76. Suitable for deburring parts turned on a lathe. Opposed direction of the cut on the front and back side causes the file to move away from the chuck during lathe work. This improves safety. aluminium, hard non-ferrous metal, plastics, steel, cast steel deburring, work on edges Single cut 6 DE x 6.0 FH 4/ 0 6 DE 50 H x 6.5 FH 5/ 5 6 DE 300 H Catalogue Page 7

11 Files for the workshop Key files These small files are perfectly suited to light and delicate filing tasks, especially in tool and mouldmaking. PFERD produces the different file shapes according to DIN 783 specifications. Versatile application. Very handy design for the processing of delicate components. Aluminium Copper Brass Zinc Grey cast iron Steels up to,00 N/mm² Cast steel Deburring Surface work Work on edges (chamfering, rounding) Sharpening Finishing Ordering note: PFERD key files are available in industrial packaging without or in POS packaging with wooden. Accessories: PFERD offers a practical quickmounting for key files. File tangs are reliably clamped by simply twisting the two halves of the. For ordering data and more information about PFERD file s, see page 57. Hand (7) Rectangular files that are cut on three sides and uncut on one side. Version with tang. Industrial packaging (without ) x.4 FH H x.8 FH H POS packaging (with ) x.4 - wooden 0 PF 7 00 H Flat (7) Rectangular file, tapered and cut on four sides. Version with tang x.4 FH H x.8 FH H Page Catalogue 8

12 Three square (37) Triangular file, tapered and cut on three sides. Version with tang. Files for the workshop Key files FH H Square (47) Square file, tapered and cut on four sides. Version with tang. Industrial packaging (without ) FH H POS packaging (with ) wooden 0 PF H Half-round (57) Half-round file, cut on two sides. Version with tang. Industrial packaging (without ) x 3.0 FH H POS packaging (with ) x wooden 0 PF H Round (67) Round file with circumferential cut. Version with tang. Industrial packaging (without ) FH H POS packaging (with ) wooden 0 PF H Catalogue Page 9

13 Files for the workshop Key file sets Key file set 65 A Contains an application-oriented selection of key files. Ideal for fine and delicate filing. Contents: Six key files: hand (7) half-round (57) Suitable for a wide range of delicate and light filing tasks. flat (7) round (67) three square quick-mounting (37) Supplied with quick-mounting no. square (47) 0 in a plastic pouch to protect against dirt and damage A 00 H Key file set 65 B Contains an application-oriented selection of key files. Ideal for fine and delicate filing. Contents: Six key files: hand (7) half-round (57) Suitable for a wide range of delicate and light filing tasks. flat (7) round (67) three square (37) Supplied with mounted wooden s in square (47) a plastic pouch to protect against dirt and damage B 00 H Key file set 65 K Contains an application-oriented selection of key files. Ideal for fine and delicate filing. Contents: Six key files: hand (7) half-round (57) Suitable for a wide range of delicate and light filing tasks. flat (7) round (67) three square (37) Supplied with mounted wooden s square (47) in a metal box to protect against dirt and damage K 00 H Page Catalogue 0

14 Tungsten point file Rectangular file with flat and cut on two sides. Shape A according to DIN 783. Very thin file, which is particularly suitable for work on contacts and in narrow grooves and slots. The punched file eliminates the need for an additional. Very small cross for use in keyways. Handy design. soft non-ferrous metal, steel, cast steel deburring, surface work Files for the workshop Tungsten point file 8 A x. 0 8 A 00 H Catalogue Page