Precision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
|
|
- Maximillian McCoy
- 5 years ago
- Views:
Transcription
1 Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346 Vices / Levels Pages , 355, 356 V-Blocks/Precision Levels Pages 352, 353 The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
2 Gauge Stand with hardened Steel Anvil Column ø ø 30 Throat 65 Stem hole ø ø 3/8", 8 with bush (standard accessory) Fine 1 adjustment Base size 168 x 110 Series 7 Standard version Standard accessories Description Flat anvil Serrated anvil 21JAA316 Bushing Ø 8 Optional accessories Description Convex anvil Example of application Metric Table dimensions Maximum measuring height Measuring table Table flatness μm Squareness table-stem hole μm/ Ø Serrated (101462) / Ø Serrated (101462) / Ø Flat (101461) / The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 325
3 Gauge Stand with hardened Steel Anvil Series 215, Series 7 Standard version Standard accessories Description 21JAA316 Bushing Ø 8 21JAA329 Bushing Ø 8 21JAA330 Bushing Ø 9,53 (3/8") 21JAA316 only for JAA329 and 21JAA330 only for Optional accessories Description 21JAA331 Bushing Ø JAA331 : only for Metric Throat Table dimensions Maximum measuring height Column ø x x x Screw on column Stem hole Ø ø 3/8" (ø 8 with bush) ø 3/8" (ø 8 with bush) ø 20 (ø 8 /ø 3/8" with bush) Base size 168 x x x 179 Fine adjustment Table flatness μm Squareness tablestem hole μm/ / / / The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
4 Gauge Stand with hardened Steel Anvil Column travel: Column travel: The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 327
5 Gauge Stand with hardened Steel Anvil Series 913 Standard version Simple standard version. Column ø Stem hole ø 22 8 Optional accessories Description Horizontal measuring bow for comprehensive measuring applications. Centre distance : max Throat Table dimensions Maximum measuring height ø x with Quick Action Stand for precision bore gauges Series 215 For batch-measurement of small parts. Optional accessories Description Detachable angle stop for safe and quick workpiece positioning under the measuring instrument, for Ø Table dimensions Measuring stroke Maximum measuring height ø 60 max , The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
6 Dial Gauge Stand Series 912 Black granite, fine diamond-lapped measuring table. Arm with 120 projection Base size 260 x 140 x 50 Table dimensions Maximum measuring height Throat Column ø Fine adjustment Stem hole ø Table flatness μm 200 x The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 329
7 Gauge Stand with granite base Series 912 Wear-resistant black granite table. With cross arm and fine adjustment Base size 150 x 100 x 40 Table dimensions Max. measurement height Throat Column ø Stem hole ø Arm ø Table flatness μm 100 x The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
8 Gauge Stand with granite base Throat 65 Standard accessories Description 21JAA316 Bushing Ø 8 21JAA329 Bushing Ø 8 21JAA330 Bushing Ø 9,53 (3/8") 21JAA316 for , , JAA329 and 21JAA330 for Series 215 with wear-resistant granite table Optional accessories Description 21JAA331 Bushing Ø only for Base size 120 x 180 x x 200 x x 250 x x 300 x 80 Max. measurement height Column Ø Fine adjustment Screw on column Stem hole ø Ø 3/8" (Ø 8 with bush) ø 3/8" (ø 8 with bush) ø 3/8" (ø 8 with bush) ø 20 (ø 8 /3/8 with bush) Table flatness μm Squareness table stem hole μm/ 3 0.2/ / / / The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 331
9 Jointed Magnetic Stand Series 011 with mechanical locking system and fine adjustment Allows a dial indicator to be fixed in any position by mechanically clamping the articulateded arm Clamping device Clamping force (vertical) N Base size (LxWxH) Total Height Working radius Thread Arm/ Base Stem hole Ø magnetic x30x M6 x magnetic x 50 x M8 x magnetic x 50 x M8 x magnetic x 50 x M8 x The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
10 Jointed Magnetic Stand Standard accessories Description 02AZA292 Bush for ø 8 stem Series 7 with hydraulic locking system and fine adjustment Allows an indicator to be fixed in any position of the articulated arm. Clamping device Clamping force (vertical) N Base size (LxWxH) Total Height Working radius Fine adjustment Thread Arm/Base 7033B magnetic x 60 x ±4 M8 x Stem hole Ø 6, 8 and 3/8" The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 333
11 Flexible Jointed Arm Series 011 / 076 Thread M 8 x Mechanical clamping Dimensions : see Mechanical clamping Dimensions : see Hydraulic clamping Dimensions : see 7019B Metric Stem hole ø Working radius ± ± ± and 3/8" ± Magnetic Base Series 7 / 011 V-block type. 7013B Metric Base size Threaded bore Clamping force (vertical) N x 50 x 55 M 8 x B 50 x 60 x The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
12 Magnetic Stand Base size (LxWxH) 60 x 50 x 55 Stem hole ø 3/8" (ø8 with stem bush) Series 7 V-block base type. Standard accessories Description 02AZC291 Reducing sleeve to hold 8 stems Optional accessories Description 02AZC cross arm SN 7011SN 7010SN Clamping device Total height Fine adjustment Working radius Thread Arm/Base 7010SN magnetic 232 None 150 M8 x SN magnetic 232 yes 160 M8 x Base size (LxWxH) 50 x 60 x 55 Stem hole ø 3/8" (ø8 with stem bush) Series 7 With V-block base and flexible arm. Standard accessories Description 02AZC291 Reducing sleeve to hold 8 stems Total height Working radius Clamping device Thread Arm/Base magnetic M8 x The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 335
13 Magnetic Stand Series 7 Mini type Mini measuring stand without magnet ON/OFF. Designed to accept dial test indicators with 6 or 8 diameter stems, or dovetail. Base size (LxWxH) ø Total height Working radius Clamping device Clamping force (vertical) (g) Stem hole Ø 7014 magnetic 150 N and Series 913 Specially suitable for attaching to cylindrical parts. Magnetic base. Base size (LxWxH) 114x88x Clamping device Total height Clamping force (vertical) Working radius Stem hole Ø Minimum workpiece diameter magnetic N 120 4/ The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
14 Pneumatic Stand Series 913 Adheres to all smooth surfaces such as granite, polished steel, etc Base diameter Clamping device Vertical arm Clamping force (vertical) N Cross arm Bore for dial indicator stem ø Total height pneumatic 200 x ø x ø The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 337
15 Precision Bench Instruments Series 967 Bench Centres Used for fast and precise checks of runout on cylindrical/tapered parts. Base and centre-stocks manufactured from stress relieved and aged cast iron. Centres made from hardened and precision ground steel. Stem hole ø 3/8" (ø 8 with stem bush) Standard accessories Description 56AAK066 Stand 56AAK426 Stand 02AZA292 Bush for ø 8 stem 56AAK066 Stand for , AAK426 Stand for Stand Max. Workpiece weight Max. Ø V-Base L1 L2 D A B C H AAK AAK , * 56AAK , The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
16 Combination Square Set Series 180 Set Three heads are attachable to the stainless steel rule (blade), allowing versatile measurements on various types of worpiece. The heads are hardened. An economy set is available that omits the protractor head U Square head U U Center head Metric Description (g) U Combination set : square head ( U) center head ( U) protractor head ( U) 300 blade size ( U) Inch/Metric Description (g) U Combination set : square head ( U) center head ( U) protractor head ( U) 12"/300 blade size ( U) U Revesible protectorhead Head (individual) Description (g) U Square head, hardened and ground, with spirit level and scriber U* Centre head, hardened and quenched U Reversible protractor head,with spirit level, bidirectional graduation from 0 to Blade (individual) Graduation Range (g) U* 1/8", 1/16", 1/32", 1/64" 6" U* 1/32", 1/50", 1/64", 1/100" 6" U* 1/32", 1/64", 1, 0.5 6"/ U* 1, 0.5, 1, U 1/8", 1/16", 1/32", 1/64" 12" U* 1/32", 1/50", 1/64", 1/100" 12" U 1/32", 1/64", 1, "/ U 1, 0.5, 1, U* 1/8", 1/16", 1/32", 1/64" 18" U* 1/32", 1/50", 1/64", 1/100" 18" U* 1/32", 1/64", 1, "/ U* 1/8", 1/16", 1/32", 1/64" 24" U* 1/32", 1/50", 1/64", 1/100" 24" U* 1/32", 1/64", 1, "/ The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 339
17 Universal Bevel Protractor Series 187 High-precision angle gauge for accurate angle measurement of machines, molds, and jigs. Can be attached to height gauges. With magnifying glass. Metric with magnyfing glass Blade edge angle Blade length (g) w/60, 45 and 30 edges 150, w/60 and 45 edges w/60 and 45 edges with height gage holder Graduation 5 ' ( ) Circle division 4 x 90 Delivery In a box Standard accessories Description Blade Blade Holder for Height Gauges with 9 x 9 scriber shaft for , for , for Height Gage with 9x 9 scriber shaft Optional accessories Description Acute angle attachment standard accessory for Standard accessories for Inch Description / 6" blade / 12" blade for , for , Inch Blade edge angle Blade length (g) w/60, 45 and 30 edges 6", 12" w/60 and 45 edges 6" w/60 and 45 edges 12" Series 187 Circle division 4 x 90 Graduation 5' Delivery In a box, with acute angle attachment ( ) Standard accessories Description Acute angle attachment Optional accessories Description Holder for height gauges with 9 x 9 scriber shaft Fixed blade length Adjustable blade length (g) Application with acute angle attachment The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
18 Digimatic Universal Bevel Protractor Functions Series 187 ZERO/SET PRESET DATA/HOLD Data/Output Angle sexagesimal/decimal ON/OFF Digital step 1' (0.01 ) Display LCD with Character Height 6.5 Max. permissible error 2' (0.03 ) Measuring range -360 to 360 Repeatability 1' (0.01 ) Delivery in a box including battery Battery life approx hours Standard accessories Description Blade Blade Holder for Height Gauges with 9 x 9 scriber shaft for for for , Optional accessories Description Acute angle attachment Data cable (1 m) Digimatic cable (2 m) AZD790F Connecting cable U-Wave ADV380F USB Input tool Direct cable (2 m) Series 187 With data output With easy-to-read digital display. Automatic turn-off after 10 minutes, fixed reference points for easy adjustment. The measuring blade can be slid and clamped over the entire length. Fine adjustment for precise adjustment of arbitrary angle dimensions. With mounting facility on height gauges and tracers of series 192 via holder Holder Metric Blade length (g) Application with acute angle attachment Consumable spares Description 05SAA217D Lithium battery CR Inch Blade length (g) " " Standard accessories for Inch Description / 6" blade / 12" blade Height gauge holder for for for , The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 341
19 Knife Edge Straight Edge Series 528 These straight edges are especially suited to testing the flatness of surfaces. Hardened, ground and micro lapped measuring edge. Made of special tool steel. With hand guard. Accuracy According to DIN 874 Section 60 Series 528 Longueur Remarks Supplied in a wooden case Supplied in a wooden case Supplied in a wooden case The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
20 High Precision 4 Face Square Master Series 311 The squareness and straightness of the four reference surfaces and two side surfaces are finished with ultra-high accuracy. This product is optimum to be used as the reference for inspecting accuracies of high-precision measuring instruments and XY tables, such as straightness of each-axis motion and squareness between motions of two axes Metric * * * The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 343
21 90 Steel Square Series 916 Three types of square available. Hardened, with precision ground edges. Accuracy According to DIN 875 Try type: internal perpendicularity grade 1 external perpendicularity grade 0 flatness/straightness grade 0 Beveled edge type: internal perpendicularity grade 0 external perpendicularity grade 00 flatness/straightness grade B B B Bevelled-edge square Cross section Leg length Outside squareness Inside squareness μm μm B 15 x 6 50 x μm 6 μm B 15 x 6 75 x 50 3 μm 7 μm B 20 x x 70 3 μm 7 μm B 25 x x μm 8 μm B 30 x x μm 9 μm Try square Cross section Leg length Outside squareness Inside squareness μm μm B 15 x 4 50 x 40 6 μm 12.5 μm B 15 x 4 75 x 50 7 μm 14 μm B 20 x x 70 7 μm 15 μm B 25 x x μm 18 μm B 30 x x μm 20 μm B 35 x x μm 23 μm B 40 x x μm 25 μm B 45 x x μm 30 μm Try square with shoulders Leg length Outside squareness Inside squareness μm μm B* 75 x 50 7 μm 14 μm B* 100 x 70 7 μm 15 μm B* 150 x μm 18 μm B* 200 x μm 20 μm B* 250 x μm 23 μm B* 300 x μm 25 μm B* 400 x μm 30 μm B* 500 x μm 35 μm 1, B* 750 x μm 48 μm 1, B* 1000 x μm 60 μm 1, Bevelled-edge square with shoulders Leg length Outside squareness Inside squareness μm μm B* 75 x 50 3 μm 7 μm B* 100 x 70 3 μm 7 μm B* 150 x μm 8 μm B* 200 x μm 9 μm The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
22 Steel Rules Series 182 Fully and semi-flexible rules Clear graduations on satin-chrome finish. Stainless tempered Metric Fully-flexible rule Range Graduations Width ,5 (on both faces) ,5 (on both faces) * ,5 (on both faces) * ,5 (on both faces) Inch/Metric Fully-flexible rule Range Graduations Width /6" 1-0,5 / 1/32" - 1/64" 0.47" * 150 /6" 1-0,5 / 1/50" - 1/100" 0.47" * 150 /6" 1-0,5 / 1/10" - 1/100" 0.47" * 150 /6" 1-0,5 / 1/10" - 1/50" 0.47" /12" 1-0,5 / 1/32" - 1/64" 0.47" * 300 /12" 1-0,5 / 1/50" - 1/100" 0.47" * 450 /18" 1-0,5 / 1/32" - 1/64" 0.71" /24" 1, 0,5-1/32", 1/64" 0.71" Inch/Metric Semi-flexible rule Engraved on one side only Range Graduations Width /6" 1-0,5 / 1/16" - 1/32" / 1/64" 0.51" * 200 /8" 1-0,5 / 1/16" - 1/32" / 1/64" 0.51" /12" 1-0,5 / 1/16" - 1/32" / 1/64" 0.59" * 500 /20" 1-0,5 / 1/16" - 1/32" / 1/64" 0.59" /40" 1-0,5 / 1/16" - 1/32" / 1/64" 0.59" Inch Fully-flexible rule Range Graduations Width * 6" 1/8" - 1/16" / 1/32" - 1/64" 0.47" * 6" 1/50" - 1/100" / 1/32" - 1/64" 0.47" " 1/10" - 1/100" / 1/32" - 1/64" 0.47" * 6" 1/10" - 1/50" / 1/32" - 1/64" 0.47" * 12" 1/8" - 1/16" / 1/32" - 1/64" 0.47" * 12" 1/50" - 1/100" / 1/32" - 1/64" 0.47" * 12" 1/10" - 1/100" / 1/32" - 1/64" 0.47" * 12" 1/10" - 1/50" / 1/32" - 1/64" 0.47" * 18" 1/8" - 1/16" / 1/32" - 1/64" 0.71" * 18" 1/50" - 1/100" / 1/32" - 1/64" 0.71" * 18" 1/10" - 1/100" / 1/32" - 1/64" 0.71" * 24" 1/8" - 1/16" / 1/32" - 1/64" 0.71" * 24" 1/50" - 1/100" / 1/32" - 1/64" 0.71" * 24" 1/10" - 1/100" / 1/32" - 1/64" 0.71" The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 345
23 Steel Rules Series 182 Wide, rigid type Clear graduations on satin-chrome finish. Stainless tempered Metric Range Graduations Width ,5 (on both faces) * ,5 (on both faces) * ,5 (on both faces) Inch/Metric Range Graduations Width /6" 1-0,5 / 1/32" - 1/64" 0.75" * 150 /6" 1-0,5 / 1/50" - 1/100" 0.75" * 150 /6" 1-0,5 / 1/10" - 1/100" 0.75" * 150 /6" 1-0,5 / 1/10" - 1/50" 0.75" /12" 1-0,5 / 1/32" - 1/64" 0.98" * 300 /12" 1-0,5 / 1/50" - 1/100" 0.98" /18" 1-0,5 / 1/32" - 1/64" 1.18" /24" 1-0,5 / 1/32" - 1/64" 1.18" Inch Range Graduations Width " 1/8" - 1/16" / 1/32" - 1/64" 0.75" * 6" 1/50" - 1/100" / 1/32" - 1/64" 0.75" " 1/10" - 1/100" / 1/32" - 1/64" 0.75" * 6" 1/10" - 1/50" / 1/32" - 1/64" 0.75" " 1/8" - 1/16" / 1/32" - 1/64" 0.98" * 12" 1/50" - 1/100" / 1/32" - 1/64" 0.98" * 12" 1/10" - 1/100" / 1/32" - 1/64" 0.98" * 12" 1/10" - 1/50" / 1/32" - 1/64" 0.98" * 18" 1/8" - 1/16" / 1/32" - 1/64" 1.18" * 18" 1/50" - 1/100" / 1/32" - 1/64" 1.18" * 18" 1/10" - 1/100" / 1/32" - 1/64" 1.18" * 24" 1/50" - 1/100" / 1/32" - 1/64" 1.18" * 24" 1/10" - 1/100" / 1/32" - 1/64" 1.18" The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
24 Parallelism Squareness / / 100 Precision Vice Series 930 Threaded spindle type Made of tool steel, hardened and precision ground. With horizontally ground V-groove in the movable jaw A B C D E F G H I M M M , M , Parallelism Squareness / / 100 Series 930 Threaded spindle type For grinding large workpieces. Including one key bar with hydraulic amplification of the clamping force. With horizontally ground V-groove in the movable jaw A B C D E F G max. H J I Height x Depth M 6 10 x , The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 347
25 Precision Vice Series 930 Pull-down clamping action High accuracy for precision grounding, milling, measuring and eroding. Parallelism Squareness / / With quick adjustment and vertically and horizontally ground V-groove in the movable jaw A B C D E F G max. H J I Height x Depth M 6 8 x M 6 10 x , With horizontally ground V-groove in the movable jaw A B C D E F G max. H I J Height x Depth M M5 8 x M6 12 x , * M8 12 x , Series 930 Front axis sine vice Made of tool steel, hardened and precision ground. Bearing and holding bolt hardened and ground. The clamping device can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max. 46. Parallelism Squareness / / A B C D E F G max. H I J Height x Depth * M , * M , M , The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
26 Precision Sine Vice Setting accuracy at 45 ±15" Parallelism / 100 Squareness / 100 Series 930 Rear axis sine vice Made of tool steel, hardened and precision ground. Bearing and holding bolt hardened and ground. The clamping device can be lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max A B C D E F G max. H I J M , Setting accuracy at 45 ±15" Parallelism / 100 Squareness / 100 Series 930 Longitudinal axis sine vice Made of tool steel, hardened and precision ground. Bearing and holding bolt hardened and ground. The clamping device can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max A B C D E F G max. H I M , The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 349
27 Precision Sine Vice Series 930 Compound-axis sine vice Made of tool steel, hardened and precision ground. Bearing and holding bolt hardened and ground. The clamping devices can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks, max. 46. Setting accuracy at 45 ±15" Parallelism / 100 Squareness / A B C D E F G max. H I J M , Precision Sine Plate Series 930 Front axis type Made of tool steel, hardened and precision ground. Bearing and holding bolt hardened and ground. The clamping device can lock the vice in any angular position within the adjustment range. Accurate angle setting is made by gauge blocks. Setting accuracy at 45 ±15" Parallelism / 100 Squareness / , The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
28 Precision Sine Plate Setting accuracy at 45 ± 15" Parallelism / 100 Squareness / 100 Series 930 Made of alloyed tool steel, hardened and precision ground. Bearing and holding bolt hardened and ground. The clamping devices can lock the vice in any angular position. Accurate angle setting is made by gauge blocks Front-axis type With lever-operated magnetic chuck , Compound-axis type With M6 clamping holes , Coumpound-axis type With lever-operated magnetic chuck , The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 351
29 Cast Iron V-Blocks Series 910 Made of dense special cast iron, highly wear resistant. The 90 V-block cutting angle is parallel to the base and ismetric in pairs. For scribing, adjusting and testing cylindrical parts. Brinell hardness Delivery Parallelism between V-groove and base surface Difference of the height of the pair HBW In pairs 16 μm 16 μm Length Width Height Maximum workpiece ø Hardened Steel V-Blocks Series 181 With clamp brackets Two V-block per set. V-angle 90 clamping brackets. Contact faces ground and lapped. Designed as a fixture for checking cylindrical presicion machined parts. Hardness : Perpendicularity between V-grooves and back surface Syetry of the V-grooves Delivery Difference of the height of the pair Parallelism between V-groove and all side surfaces HRC 9 μm 6 μm In pairs 12 μm 6 μm Sample application Metric Length Width Height Maximum workpiece ø The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
30 Perpendicularity between V-grooves and back surface Syetry of the V-grooves Difference of the height of the pair Parallelism between V-groove and all side surfaces μm μm μm 10 μm 10 μm 10 μm Magnetic V-Blocks Series 181 Without clamp Contact faces ground and lapped. Regular length type with two differently sized, 90 V-groove. For holding ferro-magnetic cylindrical parts for scribing, adjusting, testing, etc Length Width Height Maximum workpiece ø Max. receiver for workpiece V- groove 1 Ø Max. receiver for workpiece V-groove 2 Magnetic force * N N 8 1, N Hardness Delivery Parallelism between V-groove and base surface Difference of the height of the pair HBW In pairs 16 μm 16 μm Cast Iron V-Blocks Series 911 Quadruple-V type Parallel pair. Made of dense special cast iron, highly wear resistant. With 4 recesses in different sizes, angle 90, worked in pairs, made of special cast, aged and stress relieved. The 90 V block angles notches are parallel to the standing surfaces and paired in identical dimensions. For scribing, adjusting and testing cylindrical parts Length Width Height Maximum workpiece ø The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 353
31 Spring Dividers and Spring Calipers Series 950 Spring divider Fully hardened and tempered joints, spring, washers, and divider points. Outside spring caliper Contact ends fully rounded to give good contact with workpiece. Inside spring caliper Ends fully rounded to give good contact with workpiece Spring divider Inside spring caliper Outside spring caliper Spring divider Range "/ Outside spring caliper Range "/ "/ Inside spring caliper Range "/ "/ The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
32 Precision Level Vee angle 140 Length 200 Width 44 Series 960 For use in setting machined surfaces precisely horizontal Sensibility (/m per division) Sensibility "(Arcsecond) " " " Max. Permissible Error (inidication accuracy) ±0.5 graduations = ±0.05 /m ±0.5 graduations = ±0.025 /m ±0.7 graduations = ±0.014 /m Flatness of reference face (bottom) μm Delivery 5 In a wooden case In a wooden case In a wooden case The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 355
33 Precision Frame Level Series 960 For use in setting machined surfaces precisely horizontal or vertical. 2 vee and 2 flat reference faces, precision ground. Graduated main (longitudinal) and auxiliary (transverse) vials. With graduation adjustable. Vee angle 140 Dimensions 200 x 200 x Sensibility (/m per division) Sensibility "(Arcsecond) Max. Permissible Error (indication accuracy) /m ±0.03 graduations = ±0.03 /m ±0.3 graduations = ±0.015 /m ±0.5 graduations = ±0.015 /m Perpendicularity of reference faces μm Parallelism of reference the faces μm Flatness of reference faces μm Delivery In a wooden case In a wooden case In a wooden case The prices listed are suggested retail prices (valid until st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are
34 Digital Protractor Measuring range 360 (4 x 90 ) Dimensions 153 x 49 x g Power supply Standard battery (9 V) GLRG1 Battery life approx. 500 hours Optional accessories Description 50AAA983A RS-232C 25 pin signal cable with foot switch 64PPP794 Magnetic V-block for securing to magnetic workpieces - Note: , 50AAA983A and are for only Series 950 For measurement of flatness, squareness and angularity. Precision support surfaces in aluminium frame providing, high rigidity and low weight Data Output Model No Yes Pro 360 Without data output Pro 3600 With data output Sensitivity (degrees) (0 to 9.99) 0.1 (10 to 90) Max. permissible error (degrees) Horizontal : 0.1 Vertical : (0 to 10) 0.1 (80 to 90) 0.2 (10 to 80) Repeatability (degrees) Distance between two M 3 x 0,5 Mounting holes The prices listed are suggested retail prices (valid until 31 st May 2013). Inch products and combined inch/metric products are generally intended for sale to the United Kingdom only. All products to be sold to coercial customers. Therefore VAT is not included. Product illustrations are 357
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationThickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
More informationElectronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationHeight Gauges Pages Data Processing Height Gauges Pages
Height Gauges Height Gauges Pages 232-240 Data Processing Height Gauges Pages 241-244 for sale to the United Kingdom only. All products are intended to be sold to coercial customers. Therefore VAT is not
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
More information102 Precision Measurement
102 Precision Measurement 4KU90 4KU86 4KU87 Outside Micrometers Quickly and easily adjusts to zero Features microfine graduations on satin chrome finish and carbide-tipped measuring faces. Ratchet stop
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationi-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54
i-checker SERIES 170 EATURES The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4"). ±(0.2+L/100)µm
More informationGAUGE BLOCKS REFERENCE GAUGES E-01
GAUG BLOCKS RFRNC GAUGS -01 Gauge Blocks Reference Gauges Gauge Blocks Reference Gauges Contents Gauge Blocks Features and Accuracies Metric Gauge Block Sets Inch Gauge Block Sets Micrometer Inspection
More informationSliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationHeightmatic SERIES 574 High Precision Height Gage
Height Gages Heightmatic 159 Digimatic Height Gage 160 ABSOLUTE Digimatic Height Gage 162 Dial Height Gage 164 Vernier Height Gage 166 CERA Caliper Checker 168 Carbide-tipped Scriber 169 Optional Accessories
More informationMICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
More informationSPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION
Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - The complete support for your inspection. Martool The latest information on MARTool products can be found on our website: www.mahr.com, WebCode 10436-5062 MarTool measuring and inspection
More informationi-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
More informationd for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
More informationBEST DEALS. TESA Brown & Sharpe quality measuring instruments at the best prices. HexagonMI.com TESAtechnology.com
BEST DEALS TESA quality measuring instruments at the best prices. Valid until 08.31.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com TESA-HITE 400/700 Robust and reliable. Ideally
More informationMeasuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
More informationWorkholding. Workholding CHUCKS CENTRES 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS STEEL CENTRES 60º PLAINBACK FITTING CARBIDE CENTRES 60º
CENTRES CHUCKS STEEL CENTRES 60º 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS CARBIDE CENTRES 60º Taper Stock Code MT1 014-101 0.25kg MT2 014-102 0.25kg MT3 014-103 0.5kg MT4 014-104 1kg MT5 014-105 2.5kg
More informationHead office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
More informationDIGITAL INDICATORS S_DIAL
DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed
More informationDOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
More informationMetrology. Jubilee campaign first half of Anniversary Gift. Vernier Caliper 100 mm. Exclusively available from specialized dealers
Metrology Anniversary Gift Vernier Caliper 100 Join the celebration and make sure to receive a caliper with our compliments Exclusively available from specialized dealers Jubilee campaign first half of
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationIndicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved
More informationHoltest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
More informationSurface Roughness Testing
Surface Roughness Testing J-1 Summary of Roughness Parameters Commonly Used Arithmetical mean deviation of the profile R a (ISO 4287, DIN 4768) The arithmetical mean deviation of the profile Ra is the
More informationDO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS.
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. Regardless of whether gears, s, cones or grooves are to be measured; the versatility of Multimar Universal Measuring Instruments
More informationU. pr. E Calibration group
of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the
More informationMarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
More informationMarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
More informationMicro-Flat Datums Pvt. Ltd., Plot No , Zone D-3, GIDC, Vitthal Udyognagar, Anand, Gujarat
Last Amended on 03.12.2015 Page 1 of 9 I. DIMENSION 1. CALIPERS $ L.C.: 0.01 mm Φ L.C.: 0.02 mm Φ 0 to 600 mm 0 to 1000 mm 0 to 2000 mm 9.37 µm 9.25 µm 14.64 µm Using Slip Gauge Set, Caliper Checker, Master
More informationV-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
More informationNew Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.
Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
More informationMITUTOYO CANADA INC. PRECISION TOOL SALE
MITUTOYO CANADA INC. PRECISION TOOL SALE Winter 2016 Prices in effect: Jan 4 to Mar 31, 2016 MITUTOYO WORKSHOP DATES & TOPICS FOR 2016 Join us for FREE half day workshops each month. Workshops begin with
More informationCalipers. B-1
alipers www.tesatechnology.com -1 alipers THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation,
More informationDO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR.
- DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR. Mahr offers you the complete product program in order for you to obtain the most reliable solution for all your measuring tasks. Whether it
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr MARSHAFT I MANUAL SHAFT MEASURING UNITS V02-May 2009 MarShaft MAN Data Sheets 1 MarShaft MAN Shaft Measuring Unit Advantages at first sight A measuring instrument for multiple measuring
More informationYOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.
- and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Heads fine spindle feed INDEX Micrometers
More informationDoes everything rotate around precision? no problem with Micromar.
Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers
More informationMetrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers
800 SECTION H Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code
ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare
More informationPRESSES. Rack and pinion presses. Toggle presses. Impact presses. Pneumatic presses. Rotary indexing table
PRESSES Rack and pinion presses Toggle presses Impact presses Pneumatic presses Rotary indexing table PRESSES Rack and pinion presses HP 40 HP 150 HP 150 T Type HP 40 HP 150 HP 150 T HP 225 T HP 200 Z
More informationEvery tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
More informationMULTIMAR I UNIVERSAL MEASURING INSTRUMENTS
- + MULTIMAR I UNIVERSAL MEASURING INSTRUMENTS DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. The latest information on MULTIMAR products can be found on our website: www.mahr.de/en/home,
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationPrecision Tools & Instruments Prices effective from Jan. 1 - Apr. 30, 2010 or while quantities last. Some items may not be exactly as shown.
WINTER FLYER 2010 Precision Tools & Instruments Prices effective from Jan. 1 - Apr. 30, 2010 or while quantities last. Some items may not be exactly as shown. QuantuMike Micrometer SERIES 293 For significant
More informationHUGE SAVINGS! LIMITED TIME ONLY!
Valid from Aug. 17, 2015 to Dec. 31, 2015 Prices Subject to Change Without Notice & Stock Availability. Mitutoyo Savings! Dial Calipers - Series 505 Resolution:.001 Extra-rigid main beam Sliding surfaces
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
SERIES 207: MICROMETER DEPTH GAGES STARRETT SERIES 440, 445: Length No. of Order Range of Base Rods No. 0-4 2-1/2 4 5001502 0-4 4 4 5001503 0-6 4 6 5001504 The depths of holes, slots, shoulders, and projections
More informationMICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900
Two-dimensional measurement operations are efficient and cost-effective with the MICRO-HITE Electronic Height Gage. The MICRO-HITE Electronic Height Gage measures in two dimensions in either rectangular
More informationFor Sales, Service & Spares contact:
For Sales, Service & Spares contact: Michael Francis House 3 Trimbush Way Market Harborough Leicestershire LE16 7XY Registered in England No. 5562754 VAT No. 780 4974 94 Precision, Quality, Innovation
More informationS_Cal PRO. Professionnal Caliper DESCRIPTION
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
More informationHeight Gauge Page 234. Height Gauge Accessories Page 241
Height Gauges Height Gauge Page 234 Height Gauge Accessories Page 241 Height Gauge with Data Processing Unit Page 243 233 Lightweight Vernier Height Gauge Series 506 This vernier height gauge offers you
More informationJSR GROUP. Profile Projector. PJ-A3000 SERIES 302 Profile Projectors
PJ-A3000 SERIES 302 s The PJ-A3000 Series profile projectors are medium-size models that feature excellent versatility and easy operation. Easy-to-read digital XY counter is located near the projection
More informationDigimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE
D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic
More informationBEST DEALS. TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! HexagonMI.com TESAtechnology.
BEST DEALS TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! Valid until 04.30.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com
More information0-1 /0-25mm Optional Accessories MSLP SALE 05CZA662 SPC cable (40 / 1m) $ $ CZA663 SPC cable (80 / 2m) $ $133.
Winter 2012 Prices effective from Jan. 3 to Apr. 30, 2012 New Year Sale Featuring Mitutoyo Precision Measuring Tools & Instruments Cable #02AZD790B Coolant Proof Micrometers - Ratchet Stop Range Order
More informationVasals Engineering Industries, No. 33, First Floor, Govardhan Garden, J.C. Industrial Area, Kanakapura Road, Yelachenahalli, Bangalore, Karnataka
Last Amended on 01.06.2015 Page 1 of 8 I. DIMENSION 1. PLAIN PLUG 1 mm to 50 mm 2.2 µm Using LVDT Probe 100 mm to 200 mm 4.2 µm 0 Grade Gauge Blocks by Comparison 2. THREAD PLUG 3. TAPER PLAIN PLUG 4.
More informationCalipers. B-1
alipers -1 L I P E R S THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation, they are a favourite
More informationMu-checker To support building the system with automatic measuring unit or dedicated gages
7 24 7 3.5 16 Mu-checker To support building the system with automatic measuring unit or dedicated gages SERIES 519 Mu-checker (Electronic micrometer) Probes (Lever head / Cartridge head) Lever heads Order
More informationDial gauge testing stand M3
Dial gauge testing stand M3 DESCRIPTION probes (like P10 and P50) (P10 calibrated on channel 1 and P50 calibrated on channel 2) Fast fixing by knob-pulley Delivered with inspection software SYCOPRO II
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationReliance Calibration Laboratory, Sr. No. 21/7, (Gokul Nagar, Narhe), Lygude Estate, Dhayari-Sinhgad Road, Pune, Maharshtra
Last Amended on 20.10.2014 Page 1 of 8 I. DIMENSION 1. Caliper $ (Digital/ Dial/ Analogue) L.C.: 0.01 mm ф 0 to 300 mm 0 to 600 mm 0 to 1000 mm 14.0 µm 15.0 µm 19.0 µm Using Caliper Checker & Length Bars
More informationMarCator. Dial and Digital Indicators
MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance
More informationHeight Gauges. Height Gauges K-1
Height Gauges K-1 Made To Measure in the Course of the Manufacturing Process Height gauges perform one-dimensional measurements on a surface plate, preferably in granite. TESA-µHITE we offer to you in
More informationCalibration House, 71, Tarani Colony, Near Amir Vila, A. B. Road, Dewas, Madhya Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 8 I. DIMENSION 1. Calipers (Vernier/Dial/Digital) $ L.C.: 5 μm Φ 0 to 1000 mm 13.0 µm Using Caliper Checker, Gauge Block & Length Bar 2. Height Gauges $ (Vernier/Dial/Digital)
More informationLinear Height LH-600E SERIES 518 High-Performance 2D Measurement System
Linear Height LH-0E SERIES 518 High-Performance 2D Measurement System Excellent accuracy of (1.1+0.6L/0)µm with 0.1µm/0.5µm resolution/repeatability. Perpendicularity (frontal) of 5µm and straightness
More informationForm Measurement ROUNDTEST RA-1600
Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful
More informationSimply the best fixation. 3D articulated arms Innovative high-quality products
Simply the best fixation. 3D articulated arms Innovative high-quality products 02 Method of operation 04 Measurement Strato Line Base Line Strato µ-line Classic Line Strato set with carrying case Individual
More informationMeasuring range X / Y mm 100 / / /170 Z travel mm 200 / 400** Max. table load kg 20
- 10 MarVision. Optical Measuring Instruments Workshop Measuring Microscope MarVision MM 220 Applications For measuring distances (QC 100); bore holes and angles and determination of geometric elements
More informationABS Digimatic Indicator ID-C
Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Bulletin No. 1966 Digital indicators offer dramatically improved readability, usability and functionality
More informationAUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
More informationSAVE UP TO 20% PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY UPDATED EDITION - OVER 40 ADDITIONAL PRODUCTS DISTRIBUTED BY:
SAVE UP TO 20% UPDATED EDITION - OVER 40 ADDITIONAL PRODUCTS PRODUCT PROMOTION DISTRIBUTED BY: FULLY CALIBRATED 2 YEAR WARRANTY Asimeto. Exactly what you need. Everything we do is as exacting as the tools
More information50 NEW. Over. items! Valid January 1 st - April 30 th
Over 50 NEW items! Valid January 1 st - April 30 th Fowler - Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult
More informationMW-2012E PRODUCT CATALOGUE 12/13. Partners in Precision INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE
MW-2012E PRODUCT CATALOGUE 12/13 INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE MOORE & WRIGHT A Brief History... Founded in 1906 by innovative young engineer, Frank
More informationBIGGEST TOOL-A-THON EVER!
BIGGEST TOOL-A-THON EVER! 8 NEW Pages! Over 50 NEW Products! Sale ends December 31, 2012 These Gages Read in: Poly-Cal Electronic Caliper Range 6"/150mm Polycarbonate Frame Large easy-to-read display.
More information7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
More informationElectronic Indicator
Direct Inch/Metric Conversion Resolution.0005" (.01mm) Large, high contrast LCD display Hold feature ABS/INC Measurement Direct RS232 output Floating zero Positive lock, carbide scriber Includes high-impact
More informationSAVER ZONE WINTER FLYER 2014 SUPER BORE GAUGE SET BORE GAUGE ABSOLUTE DIGIMATIC CALIPER. Quality products from a brand you can trust.
WINTER FLYER 2014 Prices in effect from Jan. 2 to Apr. 30, 2014 or as otherwise noted, while quantities last. Some items may not be exactly as shown. Distributed by BORE GAUGE SET BORE GAUGE Gauge stem
More informationFERVI IS: MEASURING TOOLS PAG. 398 PAG. 352 CALIPERS, HEIGHT GAUGES, PROTACTORS PAG. 366 DIAL INDICATORS PAG. 374 MICROMETERS PAG.
348 349 FERVI IS: MEASURING TOOLS PRECISION THOROUGHNESS RELIABILITY High standards of precision, guaranteed for every use, and a comprehensive range of specific products for any kind of measuring. Solid
More informationEdge finder with illuminated display
Edge finder with illuminated display For positioning reference points on metallic workpieces Two-axis and three-axis measurements available Can also be used to determine the centre or diameter of a bore
More informationABS Digimatic Indicator ID-C
Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Catalog No. E40-54 Digital indicators offer dramatically improved readability, usability and functionality
More informationHEIGHT GAGES YES. Frontal Squareness Deviation "/0.005mm "/.008mm "/0.011mm Air Cushion
Over 80 NEW items! HEIGHT GAGES Fowler-Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult workshop environments.
More informationNEW. Visit our NEW Website Over 100. Items! INDICATORS
Over 100 NEW Items! INDICATORS Visit our NEW Website www.fowlerprecision.com Tool-A-Thon 15.2 Highlightes Calipers up to 33% off, page 14 Outside Micrometer Sets 20% off, page 6 Fowler-Sylvac Indicators
More informationDigital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators
- 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with
More informationHOLTEST / BOREMATIC. Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy. Catalog No.
Small Tool Instruments and Data Management HOLTEST / BOREMATIC Catalog No. E12006 Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy World Class, High Performance,
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationNoga Head Office. simply sophisticated
Noga Head Office NOGA ENGINEERING & TECHNOLOGY (2008) LTD Noga Engineering and Technology was established in 1980. Over the years the company has grown to become the world leader in the manufacturing of
More informationHUGE SAVINGS! LIMITED TIME ONLY!
Valid from July 1, 2016 to September 30, 2016 *Manufacturer s Part Number Shown Special Mitutoyo Summer Savings HUGE SAVINGS! LIMITED TIME ONLY! Prices Subject to Change Without Notice & Stock Availability.
More information