ParcelTools. Feature Summary ! " # $ % $ & ' ( * +, -,
|
|
- Amie Curtis
- 5 years ago
- Views:
Transcription
1 ParcelTools Feature Summary Product Description! " # $ % $ & ' ( ) * +, -, Supported Platforms ParcelTools is certified for PowerDraft, MicroStation 95, SE, /J, and V8. Parameter Settings The Parameters Dialog Box controls the parameters for the design file currently being worked on. All the parameter settings required are user definable including yield ranges. The ability to save all the settings to a parameter file means that another user can easily recall the exact parameters to insert or extract additional data, thus reducing repetition and providing a way to maintain corporate standards. Page 1
2 Calculate Lot Yields The Calculate Lot Yield tool produces a lot yield table containing the number of lots within the size ranges nominated and the percent for that range compared to the total. The program will also calculate the minimum, maximum and average lot size. Dimension Lots ParcelTools Dimension Lots enables the user to dimension all polygons within a fence that occur on a specified level. The program will place the area of the polygon at the centroid of the polygon and each segment of the boundary will be labelled with the length of that segment. This length will be placed at an offset calculated from the centre of the segment, on the inside of the polygon. The program can optionally generate and place sequential lot numbers. This tool has an option to dimension all polygons within a fence or an individual polygon. A flood option also allows the user to dimension using a flood option and to optionally create a polygon at the same time. Renumber Lots ParcelTools Renumber Lots enables the user to. renumber lots. This works by the operator nominating a start lot and the number to add or decrease any lot numbers by. IE any lot number greater than 99 reduce by 1 or lot numbers greater than 100 increment by 200. Label Line ParcelTools Label Line enables the user to annotate a line in the design file. The labelling can be done with any combination of length, and bearing. A terminator, leader line and frame can be used to isolate the label, or alternatively the label can be placed along the line. An optional prefix and suffix can also be added to the label. The format and symbology of the label is defined by the user. Page 2
3 Place Ticks ParcelTools Place Ticks enables the user to place ticks at a user specified distance along an element. The ticks can be generated dynamically along any linear element. The symbology for the ticks is defined by the user. Find Duplicate Lot Numbers ParcelTools Find Duplicate Lot Numbers enables the user to find and highlight any duplicate lot numbers. Validate Parcel Dimensions ParcelTools Validate Parcel Dimensions enables the user to find and highlight any parcels with no lot numbers and/or duplicate or no Area text and/or no boundary dimensions. Symbology Buttons The Label Line Symbology Button All tools that create elements in ParcelTools use standard Symbology Buttons. These buttons are usually black, and have two primary purposes: a) They act as preview windows to display the elements that the tool creates, using the symbology currently set for the tool. If the symbology displays the word Off, then the feature is not currently activated. Page 3
4 b) They allow the user to change the symbology for the feature by clicking on the button. This will open another window displaying the symbology (colour, weight, style, font, etc) set for the feature. Each symbology type has an associated toggle button to lock the value currently set. If the toggle is off, then the symbology (eg: colour) cannot be edited, instead it will be picked up from the active settings (as displayed in MicroStation s Primary toolbox). Shrink Buttons All of the commands in ParcelTools use the Tool Settings window. This is the window that is reused by most of MicroStation s commands (eg: Place Smartline). In order to conserve as much screen space as possible, some of the ParcelTools commands support Shrink buttons. These buttons are labelled with >> for Expand and << for Shrink, and appear at the bottom right corner of the Tool Settings dialog box. Pushing the shrink button ( >> ) for the first time will expand the Tool Settings dialog box to show more options. Once these options have been set, the Tool Settings window can then be shrunk by pushing the shrink button ( << ) again. Calculate Lot Yield The Calculate Lot Yield tool produces a lot yield table of a user defined appearance at a nominated point in the design file. This tool uses level and colour to define the text that is to be selected to be included in the yield table. These are set in the Area Text Symbology section of the tools settings dialog. The M button allows the Page 4
5 user to select an existing element to set the matching symbology. Once the lot size text has been identified the program will process all matching text elements within a fence and produce a table containing the number of lots within the size ranges nominated and the percent for that range compared to the total. The program will also calculate the minimum, maximum and average lot size. This table will hang on the cursor waiting for the operator to place within the design file. Note: The symbology for the label can be set by pushing the symbology button. Australian Data Systems Ph: Fax: ads@ozdata.com.au Page 5
SmarTools. Feature Summary
SmarTools Feature Summary Product Description SmarTools, an MDL application, is a collection of productivity tools for those organisations involved in schematic drafting. Supported Platforms SmarTools
More informationDgnAudit. 1. What is DgnAudit?
1 1. What is DgnAudit? DgnAudit is an MDL program developed by Australian Data Systems to assist MicroStation users in the complex task of documenting and finding design files. Search produces an audit
More informationVDOT Creating Plats with GEOPAK 2004 Edition (Version 8.8)
VDOT Creating Plats with GEOPAK 2004 Edition (Version 8.8) TRN013000-1/0001 Copyright Information Trademarks Patents Copyrights AccuDraw, Bentley, the B Bentley logo, MDL, MicroStation and SmartLine are
More informationPLAY VIDEO. Fences can be any shape from a simple rectangle to a multisided polygon, even a circle.
Chapter Eight Groups PLAY VIDEO INTRODUCTION There will be times when you need to perform the same operation on several elements. Although this can be done by repeating the operation for each individual
More informationHow to do a Property Search
How to do a Property Search A Self-Tutorial GIS Services 1401 Marina Way South Richmond, CA 94804 Tel: (510) 621-1298 Fax: (510) 307-8116 1. Navigate to the GIS Mapping Services page. 2. The mapping services
More informationCPM-200 User Guide For Lighthouse for MAX
CPM-200 User Guide For Lighthouse for MAX Contents Page Number Opening the software 2 Altering the page size & Orientation 3-4 Inserting Text 5 Editing Text 6 Inserting Graphics 7-8 Changing the Colour
More informationWAITOMO DISTRICT COUNCIL ONLINE MAPS. Updated June This document contains an overview of Waitomo District Council Online Maps
WAITOMO DISTRICT COUNCIL ONLINE MAPS V8 Updated June2017 - This document contains an overview of Waitomo District Council Online Maps Table of Contents Starting Online Maps... 3 Main Screen... 4 Menu Bar...
More informationOnCOR Silverlight Viewer Guide
Getting Around There are many ways to move around the map! The simplest option is to use your mouse in the map area. If you hold the left button down, then click and drag, you can pan the map to a new
More informationProducing Project Deliverables: Creating a Plan Set
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in
More informationCamrose County WebMap Tutorial
Camrose County WebMap Tutorial Logon to the system: 1. Go to www.county.camrose.ab.ca 2. Click on WebMap Icon 3. Click HERE for Public Access 4. Click Agree 5. Welcome to WebMap Searching for a Property:
More informationProfiles - Objectives
Profiles - Objectives What is an InRoads Profile? Creating new Profiles Sources of Profiling paths Display of surfaces & offsets on profiles Available Profiling Controls Displaying Surface Features on
More informationMicroStation Tips and Tricks. Inga Morozoff, Bentley Systems, Inc Bentley Systems, Incorporated.
MicroStation Tips and Tricks Inga Morozoff, Bentley Systems, Inc. 1 Add Separator to Context Menu To add a separator to a context menu, create a new menu item and set the label as a hyphen. ALT+DATA to
More informationIntroduction. Format Text. Word 2010 Formatting Text. To Change the Font Size: Page 1
Word 2010 Formatting Text Introduction Page 1 To create and design effective documents, you need to know how to format text. In addition to making your document more appealing, formatted text can draw
More informationInDesign Part II. Create a Library by selecting File, New, Library. Save the library with a unique file name.
InDesign Part II Library A library is a file and holds a collection of commonly used objects. A library is a file (extension.indl) and it is stored on disk. A library file can be open at any time while
More informationMicroStation. FDO Reader USER S MANUAL. [Företagets adress]
MicroStation FDO Reader USER S MANUAL [Företagets adress] MicroStation FDO Reader - User s Manual, 2018-10-27 copyright, 2018 ringduvevägen 13, 132 47 saltsjö-boo e-mail: consulting@surell.se, web: www.surell.se
More informationDrainage Tools Overview Create Refined Watershed TIN CHAPTER 15
CHAPTER 15 Drainage Tools 15.1 Overview GEOPAK supports a myriad of tools to analyze and evaluate drainage patterns of a GEOPAK Digital Terrain Model. Tools for delineating watersheds, flow paths, flow
More informationBasic MicroStation Training Outline
12:30 DAY 1 Equipment Review Workstation, monitor, keyboard File server, Plot server, STATE server Drive Assignments Shortcut Menu General overview of commands Explorer Managing Folders & Files MicroStation
More informationGuide to Editing Map Legends
Guide to Editing Map Legends Map legends explain map symbols and are crucial to the communication of a map s message. Effective legends are created with careful consideration of labels and text, classes,
More informationIn this exercise, you will convert labels into geodatabase annotation so you can edit the text features.
Instructions: Use the provided data stored in a USB. For the report: 1. Start a new word document. 2. Follow an exercise step as given below. 3. Describe what you did in that step in the word document
More informationSubdivide and Conquer! - Tips and Tricks for Working with Parcels in Autodesk Civil 3D.
11/28/2005-1:00 pm - 2:30 pm Room:Swan 9/10 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Subdivide and Conquer! - Tips and Tricks for Working with Parcels in Autodesk Civil 3D. Marissa
More informationWAIPA DISTRICT COUNCIL. Maps Online 9. Updated January This document contains an overview of IntraMaps/Maps Online version 9.
WAIPA DISTRICT COUNCIL Maps Online 9 Updated January 2018 This document contains an overview of IntraMaps/Maps Online version 9.0 Contents Starting Maps Online... 3 Menu Bar... 4 Tools... 5 View Tab...
More informationCONTASign Pro User Manual
CONTASign Pro User Manual CONTASign PRO MANUAL v3.5 rev01 Page 1 of 51 CONTA-CLIP Contents Page No. 1. Main Window Layout 4 - Window Layout Customisation 5 - Window Configuration 6 2. Start Menu & Quick
More informationSection 8 Printing Information. Print Boundaries Print Styles Print/Print Organizer and PDF
Section 8 Printing Information Print Boundaries Print Styles Print/ and PDF Print Boundaries Roadways Print Styles are currently set up to seek a shape set to a certain level. There are five levels reserved
More informationMicroStation V8i Tips and Tricks and more
The following Tips and Tricks include features that are new in the version SELECTSeries 2&3 and some that have been around for a while enjoy Explorer the File Open dialog. Let s take a close look at the
More informationMunicipal Connect TM GIS Viewer
Municipal Property Assessment Corporation 1305 Pickering Parkway Pickering, ON L1V 3P2 For further information please contact your local MPAC Municipal Relations Representative. Municipal Connect TM GIS
More informationCodesoft 6 Premier Overview Manual. Thermocode Series 2 (all Printers)
Thermocode Series 2 Codesoft Overview Manual. (Issue 4.1) 28 July 2003 Page No. - 1 - Open Date Equipment Ltd. Unit s 8 & 9 Puma Trade Park, 145 Morden Road, Mitcham, Surrey. CR4 4DG United Kingdom. Tel:-
More informationAutoCAD and AutoCAD LT Update Preview Guide
AutoCAD 2018.1 and AutoCAD LT 2018.1 Update Preview Guide The AutoCAD 2018.1 Update offers new software enhancements and tools to simplify your workflows and improve productivity. To help you quickly identify
More informationSkill Set 3. By the end of this Skill Set you should be able to:
Word Processing Software OCR Level 2 ITQ Skill Set 3 Formatting Paragraphs By the end of this Skill Set you should be able to: Create Page and Paragraph Breaks Create Indents and Align Paragraphs Apply
More informationHow To Guide for Using Maryland Incentive Zone Interactive Map
How To Guide for Using Maryland Incentive Zone Interactive Map http://www.dhcd.state.md.us/gis/revitalize/index.html Purpose This How To guide is intended to: Determine if addresses are located within
More information604 - Drafting in Solid Edge: A Hands-on Experience
4 th Generation VLC courtesy of Edison2 604 - Drafting in Solid Edge: A Hands-on Experience Steve Webb, Solid Edge Field Support, #SEU13 Agenda: 604 - Drafting in Solid Edge: A Hands-on Experience Who
More informationMicroStation I/RAS B TM
TM MicroStation I/RAS B Engineer Tools Tutorial Workbook DAA021470-1/0001 Table of Contents Table of Contents... 1 Setup... 1 Section I Setting Working Units and View Preferences... 1 Section II Raster
More informationInformation System Services
Information System Services Diocese of London, 1070 Waterloo Street, London, Ontario, N6A 3Y2 Phone:(519)433-0658, Fax:(519)433-0011, E-mail: iss@rcec.london.on.ca Excel Formatting Online Demonstration
More informationP3e REPORT WRITER CREATING A BLANK REPORT
P3e REPORT WRITER CREATING A BLANK REPORT 1. On the Reports window, select a report, then click Copy. 2. Click Paste. 3. Click Modify. 4. Click the New Report icon. The report will look like the following
More informationPublishing Services ONLINE TEMPLATES User Guide
Publishing Services ONLINE TEMPLATES User Guide 1. Getting started Register as a new user and logging in 2. Start a New Design Template Project 3. Click to Customize How to make edits in a Design Template
More informationMicrosoft Word Part I Reference Manual
Microsoft Word 2002 Part I Reference Manual Instructor: Angela Sanderson Computer Training Coordinator Updated by: Angela Sanderson January 11, 2003 Prepared by: Vi Johnson November 20, 2002 THE WORD SCREEN
More informationTo Create Multiple Columns in a Word Document
To Create Multiple Columns in a Word Document To convert your standard single- (or no-) column Word document into one with multiple columns, simply choose the column format you want from the Columns menu.
More informationCreating a 3D bottle with a label in Adobe Illustrator CS6.
Creating a 3D bottle with a label in Adobe Illustrator CS6. Step 1 Click on File and then New to begin a new document. Step 2 Set up the width and height of the new document so that there is enough room
More informationColliery Task (Word 2007) Module 3 Word Processing (Word 2007)
Colliery Task (Word 2007) Module 3 Word Processing (Word 2007) 1. Open the document called Word2.doc 2. Save the document called Word2.doc to your area 3. Once the document has opened, choose file save
More informationSince you can designate as many symbols as needed as baseline symbols it s possible to show multiple baselines with unique symbology.
In this lesson you will learn how to: Tutorials Lesson 17 - Work with a Baseline Set up the symbols and bars used to display a baseline using the Baseline Setup Wizard. Insert a baseline. Highlight, lock
More information13 Vectorizing. Overview
13 Vectorizing Vectorizing tools are used to create vector data from scanned drawings or images. Combined with the display speed of Image Manager, these tools provide an efficient environment for data
More informationSending image(s) to report Click Send Snapshot on any screen in Dolphin3D and choose the Send to Report option
Dolphin 3D Reports Sending image(s) to report Click Send Snapshot on any screen in Dolphin3D and choose the Send to Report option Creating a report step by step 1. Generate the desired images in Dolphin3D
More informationOrganizing Design Data
Organizing Design Data Module Overview This module explains how to use the data in different files for reference purposes. Module Prerequisites Knowledge of MicroStation s interface Some knowledge about
More informationLinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8:
LinkMotion and CorelDraw 9, 10, 11, 12, X3, X4, X5, X6, X7 and X8: After you install LinkMotion software and set up all settings launch CorelDraw software. Important notes: Solustan s LinkMotion driver
More informationFull Search Map Tab Overview
FlexMLS Map Server Full Search Map Tab Overview The Full Search Map tab is a need to know module. It is accessible when you use Full Search under Search in the Main Menu tree of FlexMLS. This map can
More informationHOW TO MAKE-PRINT CASINO_DV 2 SIDED 12UP COUPONS
HOW TO MAKE-PRINT CASINO_DV 2 SIDED 12UP COUPONS Our new Bates Professional 14 and Bates Single Pro 14 (single user version of Professional) allows you to number carbonless forms in a 1up single form to
More informationPyxis Imposed Features
USER MANUAL Pyxis Imposed Features Application Logic When the Logic check-box is ticked, it is ticked by default (top centre of main window), Pyxis Imposed will attempt to automatically apply various
More informationXnView Image Viewer. a ZOOMERS guide
XnView Image Viewer a ZOOMERS guide Introduction...2 Browser Mode... 5 Image View Mode...14 Printing... 22 Image Editing...26 Configuration... 34 Note that this guide is for XnView version 1.8. The current
More informationFull Search Map Tab. This map is the result of selecting the Map tab within Full Search.
Full Search Map Tab This map is the result of selecting the Map tab within Full Search. This map can be used when defining your parameters starting from a Full Search. Once you have entered your desired
More informationCustomizing Interface Elements and Commands Part 02
Customizing Interface Elements and Commands Part 02 Sacramento City College Engineering Design Technology Customizing Interface Elements and Commands 1 Creating New Commands Customizing Interface Elements
More informationHome tab where most formatting options are accessed. After the Clipboard group launcher is depressed, the Clipboard pane appears.
Lesson 3 Home tab where most formatting options are accessed Clipboard group. Notice the Launcher After the Clipboard group launcher is depressed, the Clipboard pane appears. Note: 24 items can be stored
More informationMigrating To Inventor 2014
Page 1 of 6 Migrating To Inventor 2014 Inventor 2014 With the release of Inventor 2014 comes another round of upgrading and migrating of data, the most important of these being your design data, templates
More informationFormatting cells. Microsoft Excel Cell alignment. Format cells options
Formatting cells Microsoft Excel 2003 Cell alignment 1. Select a cell or cells that you wish to apply alignment 2. Click Left, Centre or Right alignment. Left, Centre, Right Format cells options 1. Highlight
More informationTutorial Base Module
Tutorial Base Module CONTENTS Part 1 - Introduction to the CycloLog desktop... 7 1.1 Introduction to the CycloLog desktop... 7 1.2 Using Log Data panes... 9 Part 2 - Importing and displaying well log data...
More informationMS Word Basic Word 2007 Concepts
MS Word Basic Word 2007 Concepts BWD 1 BASIC MS WORD CONCEPTS This section contains some very basic MS Word information that will help you complete the assignments in this book. If you forget how to save,
More informationMarch 3 rd MWF MultiLayer. User Guide
March 3 rd 2018 MWF MultiLayer User Guide Table of contents 1. Introduction: The Project Settings Hub... 4 1.1 Wall Type Map... 5 1.2 Structural Templates... 5 1.1 Secondary Template... 5 1.2 Sheathing
More informationControlling the Drawing Display
Controlling the Drawing Display In This Chapter 8 AutoCAD provides many ways to display views of your drawing. As you edit your drawing, you can control the drawing display and move quickly to different
More informationWinView. Getting Started Guide
WinView Getting Started Guide Version 4.3.12 June 2006 Copyright 2006 Mincom Limited All rights reserved. No part of this document may be reproduced, transferred, sold or otherwise disposed of without
More informationHow to use symbols, patterns, and graphic styles
Adobe Illustrator CC Guide How to use symbols, patterns, and graphic styles A wide range of symbols, patterns and graphic styles are available within Adobe Illustrator to help you quickly and easily create
More informationInspire Ten Minute Task #1
Inspire Ten Minute Task #1 Pen Power Take advantage of virtual pens with their variety of colours, pen thicknesses and transparency levels, there is so much more they enable you to do. 1. Look on the toolbar
More informationSome (semi-)advanced tips for LibreOffice
Some (semi-)advanced tips for LibreOffice by Andy Pepperdine Introduction We cover several tips on special things in Writer and Calc and anything else that turns up. Although I use LibreOffice, these should
More informationgetting the most out of guides
getting the most out of guides If you re used to other layout applications, you may be unaware of all the things you can do with ruler guides in InDesign. If you use guides in your work (if you re not
More informationManitowoc County, WI Advanced Access GIS Viewer User Documentation
Manitowoc County, WI Advanced Access GIS Viewer User Documentation Introduction Extensive time was put into developing this website both from a display, and from a printing and scaling perspective. This
More informationCreating a Title Block & Border Using Chief Architect. Architectural Design & Residential Construction Penncrest High School
Creating a Title Block & Border Using Chief Architect Architectural Design & Residential Construction Penncrest High School 2017-2018 Select New Layout to begin designing your Title Block. Note: Once the
More informationMacros Help Sheet 18
26 Queen St, Cubbington, Leamington Spa, CV32 7NA Tel: 01926 333680 Fax: 01926 885293 Email info@widgit.com web www.widgit.com Help Sheet 18 are commands that can be added to a grid cell. These can be
More informationInsight: Measurement Tool. User Guide
OMERO Beta v2.2: Measurement Tool User Guide - 1 - October 2007 Insight: Measurement Tool User Guide Open Microscopy Environment: http://www.openmicroscopy.org OMERO Beta v2.2: Measurement Tool User Guide
More informationIntrax Site Classification Application and User Guide
Intrax Site Classification Application and User Guide Date Effective 21 July 2016 Intrax Consulting Engineers Pty. Ltd. ABN: 31 106 481 252 Head Office: 35 Bank Street, South Melbourne VIC 3205 p: 03 8371
More informationMICROSOFT WORD 2010 BASICS
MICROSOFT WORD 2010 BASICS Word 2010 is a word processing program that allows you to create various types of documents such as letters, papers, flyers, and faxes. The Ribbon contains all of the commands
More informationIntraMaps End User Manual
IntraMaps End User Manual For IntraMaps Version 8 Date: 6 th July 2014 Contents Introduction... 4 What is IntraMaps?... 4 Application... 5 Main Toolbar... 6 View... 7 Original View:... 7 Pan:... 7 Zoom
More informationCity of La Crosse Online Mapping Website Help Document
City of La Crosse Online Mapping Website Help Document This document was created to assist in using the new City of La Crosse online mapping sites. When the website is first opened, a map showing the City
More informationMake Your Documents Accessible Worksheet (Microsoft Word 2010)
Make Your Documents Accessible Worksheet (Microsoft Word 2010) This exercise is intended for staff attending the Make your documents accessible course, although other staff will also find this resource
More informationWord 2016 WORKING WITH ACADEMIC DOCUMENTS. Elaine Williamson & Catherine McGowan
Word 2016 WORKING WITH ACADEMIC DOCUMENTS Elaine Williamson & Catherine McGowan LONDON SCHOOL OF HYGIENE & TROPICAL MEDICINE OCTOBER 2017 CONTENTS INTRODUCTION...5 PAGE FORMATTING...5 Margins...5 Page
More informationIncluded with the system is a high quality speech synthesizer, which is installed automatically during the SymWord setup procedure.
Introduction to SymWord SymWord is a simple to use, talking, symbol-word processor. It has the basic functionality of a word processor. SymWord can also be configured to produce speech and/or display text
More informationPodium Plus Data Analysis Software. User Manual. SWIS10 Version
SWIS10 Version Issue 1.10 February 2005 Contents 1 Introduction 6 1.1 What is Podium Plus? 6 1.2 About This Manual 6 1.3 Typographical Conventions 7 1.4 Getting Technical Support 7 2 Getting Started 8
More informationThink of layers as a stack of transparencies. Layers can be changed independently of other layers by clicking on its name in the layers palette.
Layer Techniques Think of layers as a stack of transparencies. Layers can be changed independently of other layers by clicking on its name in the layers palette. Reviewing the Layers Palette: A: Show/Hide
More informationGuide to WB Annotations
Guide to WB Annotations 04 May 2016 Annotations are a powerful new feature added to Workbench v1.2.0 (Released May 2016) for placing text and symbols within wb_view tabs and windows. They enable generation
More informationST 9 Data Management
ST 9 Data Management This Tech Tip looks at the new Data Management Tab in Solid Edge ST 9 and how you can use it to build some control over you file naming, searching and access to files. Solid Edge ST9
More informationSolo 4.6 Release Notes
June9, 2017 (Updated to include Solo 4.6.4 changes) Solo 4.6 Release Notes This release contains a number of new features, as well as enhancements to the user interface and overall performance. Together
More informationArcGIS 9. Maplex Tutorial
ArcGIS 9 Maplex Tutorial Copyright 004 006 ESRI All rights reserved. Printed in the United States of America. The information contained in this document is the exclusive property of ESRI. This work is
More informationChapter 10 Working with Graphs and Charts
Chapter 10: Working with Graphs and Charts 163 Chapter 10 Working with Graphs and Charts Most people understand information better when presented as a graph or chart than when they look at the raw data.
More informationNiceLabel Designer Standard User Guide
NiceLabel Designer Standard User Guide English Edition Rev-1112 2012 Euro Plus d.o.o. All rights reserved. Euro Plus d.o.o. Poslovna cona A 2 SI-4208 Šenčur, Slovenia tel.: +386 4 280 50 00 fax: +386 4
More informationIt is a good idea to practice View Control tools for 5 minutes at the start of every 3D session, before doing any other work.
3D View Control Module Overview All the 2D view controls, such as Fit View, Zoom In and Out, Window Area, and Pan, can be used in 3D. As in 2D, elements to the left, right, above, or below can be excluded
More informationWord Tips & Tricks. Status Bar. Add item to Status Bar To add an itme to the status bar, click on the item and a checkmark will display.
Status Bar The status bar is located on the bottom of the Microsoft Word window. The status bar displays information about the document such as the current page number, the word count in the document,
More informationUsing Inspiration 7 I. How Inspiration Looks SYMBOL PALETTE
Using Inspiration 7 Inspiration is a graphic organizer application for grades 6 through adult providing visual thinking tools used to brainstorm, plan, organize, outline, diagram, and write. I. How Inspiration
More informationWord Processing: Basic Editing Skills Task 4 (2003)
Word Processing: Basic Editing Skills Task 4 (2003) TASKS 1. Open the document phones text from the www.teach-ict.com website but do NOT save it. 2. Open a blank Word document. 3. Using the window menu,
More informationcreating files and saving for web
creating files and saving for web the template files assume a default image size of 300 x 300 pixels images intended for the web should be produced in rgb mode name your images in a logical format, so
More informationA QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE)
A QUICK TOUR OF ADOBE ILLUSTRATOR CC (2018 RELEASE) Lesson overview In this interactive demonstration of Adobe Illustrator CC (2018 release), you ll get an overview of the main features of the application.
More informationEXCITECH TOOLKIT for REVIT
EXCITECH TOOLKIT for REVIT Index 1. WHAT'S NEW?... 3 New in Kobi Toolkit for Revit 2018.1... 3 2. GET STARTED... 3 About Kobi Toolkit... 3 Installation... 3 User interface... 5 Activating licence... 6
More informationSedao Ltd. QuickChange PROject. User Manual for QuickChange PROject version 2.1.5
Sedao Ltd QuickChange PROject User Manual for QuickChange PROject version 2.1.5 Contents What is QuickChange PROject?... 2 Simple Artwork Creation... 5 Creating a project... 7 QuickChange PROject Template
More informationSALTO GRAPHICAL MAPPING MANUAL. Version 1.0
SALTO GRAPHICAL MAPPING MANUAL Version 1.0 Historic of changes Version Status Date Author Change description 1.0 Official 28/11/2012 Aitor Apalategi First version of the manual 2 INDEX 1. Introduction...
More informationMS Office Word Tabs & Tables Manual. Catraining.co.uk Tel:
MS Office 2010 Word Tabs & Tables Manual Catraining.co.uk Tel: 020 7920 9500 Table of Contents TABS... 1 BASIC TABS WITH ALIGNMENT... 1 DEFAULT TAB STOP... 1 SET MANUAL TAB STOPS WITH RULER... 2 SET MANUAL
More informationAlignments CHAPTER INTRODUCTION OBJECTIVES
CHAPTER 5 Alignments INTRODUCTION This and the next four chapters focus on roadway design and its documentation. This chapter concentrates on roadway plan design. The next three chapters focus on the roadway
More informationIn so many ways summary
In so many ways summary Many of Word s functions can be activated in a variety of different ways. Often you can use the menu, a tool on the toolbar or a shortcut key to achieve the same result. Rather
More informationPromap V2 User Guide
Promap V User Guide Need help? 0844 844 9960 customerservice@promap.co.uk www.promap.co.uk Contents 0 Introduction SECTION 0 Login & Search SECTION 04 Map Layers SECTION 3 05 Defining Sites and Printing
More informationTutorial. Aligning contigs manually using the Genome Finishing. Sample to Insight. February 6, 2019
Aligning contigs manually using the Genome Finishing Module February 6, 2019 Sample to Insight QIAGEN Aarhus Silkeborgvej 2 Prismet 8000 Aarhus C Denmark Telephone: +45 70 22 32 44 www.qiagenbioinformatics.com
More informationTABLE OF CONTENTS. Introduction to Mailing Labels Getting Started Creating Lot Owner Mailing Labels... 2
TABLE OF CONTENTS Introduction to... 1 Getting Started... 1 Creating Lot Owner... 2 Creating Committee Member... 3 Creating Supplier... 5 Creating Debtor... 6 Screen... 8 Modify Formats... 10 Creating
More informationVariography Setting up the Parameters When a data file has been loaded, and the Variography tab selected, the following screen will be displayed.
Variography - Introduction The variogram (or semi-variogram) is a graph relating the variance of the difference in value of a variable at pairs of sample points to the separation distance between those
More informationArtistic Text. Basics 1
Basics 1 In this tutorial, we ll show you how to: Work with artistic text. Create, edit, and format text. Apply shadows, reflections, and other text effects. Create shaped text (or text-on-a-path). 2 Basics
More informationWord Processing for Dissertations
Word Processing for Dissertations Microsoft Office 2016 Word Processing for dissertations Contents: Steps in Writing a Dissertation... 2 Writing Dissertations on a PC... 3 Getting Started... 4 What is
More informationBT Web Hosting. Features and functionality
BT Web Hosting Features and functionality 1 Hopefully you will now have a website that is activated and potentially even published. This guide will take you through some of the additional features and
More informationIS357 Further Features Of Excel 2010
IS Further Features Of Excel 00 October 0 0 th October 0 Table of Contents FILES REQUIRED AND INTRODUCTION... ACCESSING THE IT TRAINING EXERCISE FILES FROM YOUR OWN PC/LAPTOP... OPENING AN EXISTING WORKBOOK...
More information