Portable ultrasonic image diagnosis. Simple operating instruction Rev.2.5

Transcription

1 300C Portable ultrasonic image diagnosis Simple operating instruction Rev.2.5 Sonon 300C Usage Introductions SONON 300C is developed and manufactured by HEALCERION and if additional information or support is required, please contact with Celta Ingenieros or HEALCERION. Celta Ingenieros: Paseo maritimo 30, Cambre (15679), Tlf:

2 Package Registration and Start Sonon300C main Rechargeable Battery(2ea) Battery Charging Dock Charger Adaptor Main Adaptor When using the device for the first time, conduct the user registration and set up the pass word. Thenceforth, the application can be operated with the pass word only. Freeze Button Battery Cover Operation LED Power Button Charging port WiFi LED Connection Powering on Sonon300C Selection Inserting the battery Press the Power button for 2 seconds The LED turns on when WiFi is ready App Start After lowering the locking button, separate the battery cover. Select the device serial number in WiFi Setting Enter the WiFi password to connect (Default: ) Starting Scan Installing the application (ios, Android) Search SONON 300C Run Sonon300C app and enter the your password Select Start Scan button for LIVE mode

3 LIVE Mode No. Name Function 1 TGC button TGC (Time Gain Compensation), adjusting the brightness by controlling the TGC value for each depth with 4 slides 2 DR button 3 Freeze conversion button 4 Image save button 5 Patient information button DR (Dynamic Range), adjusting the brightness and contrast by controlling the DR value with slide Stopping the image during the scanning, or activating again the stopped image Recording the image during the scanning and saving the recorded image to the play list (database) 6 Page move button Moving to the previous page Selecting the patient in the list or inputting the information of new patient 7 File list button Moving to the saved file list (Play List) screen 8 Setup button Setting menu is displayed. 9 Probe direction display Displaying the reversed image 10 Grey bar Displaying the brightness of image 11 FL display 12 Side scale area Focal length (FL), located at the side scale area and displaying the current FL value, and setting up the FL value to the target section to be observed Adjusting the depth value by dragging this area, or setting up the FL value by selecting the FL indicator 13 Network connection state display Green: Displaying that the network connection state is stable Yellow: Displaying that the network connection state is unstable 14 Battery remains display Displaying the battery remains of SONON 300C main body MI: Displaying the mechanical index value 15 Acoustic output power display TIB: Displaying the bone thermal index value TIS: Displaying the soft-tissue thermal index value TIC: Displaying the cranial-bone thermal index value 16 Frame rate display Displaying the number of frames to be transmitted 17 Patient information area Displaying the patient information saved in the patient list. Displaying with the Name - ID

4 LIVE Mode Adjusting the depth Adjust the depth by dragging the right side ruler section of screen. The range of depth change is 5Cm~20Cm. Magnifying & reducing the screen Conduct the magnifying & reducing the screen by pushing out or gathering it with two fingers. Adjusting the DR After tapping the DR button, adjust the DR value by moving the slide bar to the left and right side. ❶ Drag the side ruler area in the upward direction. ❷ The depth value is increased. ❸ Drag the side ruler area in the downward direction. ❹ The depth value is decreased. Adjusting the TGC After tapping the TGC button, adjust the TGC by moving the slide bar to the left and right side. ❶ Select the TGC button ❷ The TGC slide bar is appeared and it is adjusted by user. Dragging to the left side: The brightness of selected section is decreased. Dragging to the right side: The brightness of selected section is increased. ❶ Select the DR button. ❷ The DR adjusting slide bar is appeared. ❸ In accordance with the dragging action, the value corresponded to it is displayed on the screen. * Dragging to the right side: DR XX db value is increased (Maximum 96 DB) * Dragging to the left side: DR YY db value is decreased (Minimum 30 DB) * As the value is increased, the brightness is increased and contrast is decreased of the screen. ❶ The screen to which the adjusted DR value is applied is displayed. ❷ Select the DR button. ❸ The DR adjusting slide bar is disappeared.

5 Optimum setting value Freeze Mode ios / ipad PRO Ver with Medium filter ios / ipad PRO Ver with Medium filter No. Name Function 1 Clear icon Deleting all measurements and descriptions 2 Measurement icon Measuring the length and elliptical length including the comments and fetal biometry 3 Live button Switching to live screen 4 Still-shot icon Saving the diagnosis image which is currently displayed 5 Patient list icon 6 Rewind bar Select the patient in the list or input the information of new patient. Up to the maximum 150 frames of the images from the latest diagnosis screen can be saved. (When moving the rewind bar, the screen is changed to corresponding frame for displaying in the order of the corresponding frame/saved frame.) The diagnosis image required can be saved by moving the rewind bar.

6 Setting Image option Diagnosis data sharing (Playlist Edit ) 1. When connected with the SONON AP (Identical with the Still-shot, Cine File) * No.1 popup is always displayed. 2. When the Recording File exceeds the capacity of 20MB * Frame Average - Random noise mitigating function * Image Enhancement - Speckle noise mitigating filter The location of Patient List can be accessed by selecting the Patient List Menu from the Start Screen, or selecting the Patient List Icon (Human shape) from the Live, Freeze screen. ios 1. Select the file to which the is to be transmitted from the Play list screen. 2. When selecting the sharing icon from the replaying screen of corresponding file, the sub-menu is displayed. Select the When connected with SONON AP, No.1 popup window is displayed, and select OK. 4. The diagnosis file is attached automatically. After preparing the , select the Send button. Android 1. Select the file to which the is to be transmitted from the Play list screen. 2. When selecting the Transmission icon at the top left side, the sub-menu is displayed. Select the share. Select the Select the When connected with SONON AP, No.1 popup window is displayed, and select OK. Caution When connected to SONON 300C AP, user cannot call the application. In order to transmit the , disconnect the connection of SONON 300C AP from the Wi-Fi settings, and use the mobile network or other Wi-Fi communication.

7 300C Portable ultrasonic image diagnosis Simple operating instruction Rev.2.5