Index. 07/15 Subject to technical changes. Temperature controls. Page. DP1 / 2 Controls DP3 / 5 DP6 9.1.

Transcription

1 Index Temperature controls Page DP1 / DP3 / 5 DP DPT DPT DPT multizone /15 Subject to technical changes

2 DP1 1 zone, DP2 up to 2 zones DP1 Easy-to-operate with separate displays and input keys Total power output - single phase 230 VAC *, 16 A Fuzzy logic PID-control Softstart function for smooth start-ups Set temperature and actual temperature displayed for each control zone Pulse group control Power limiting during start-up Temperature reduction possible during production interruptions Continuous error control procedure Dimensions: WxHxD = 125 x 95 x 290 mm Weight: 2.1 kg DP3 up to 3 zones, DP5 up to 5 zones DP3 1 x 230 VAC * / 16 A 2 x 230 VAC * / 10 A 1 x 230 VAC */ 16 A DP5 4 x 230 VAC * / 10 A 1 x 230 VAC */ 16 A Easy-to-operate with separate displays and input keys Total power output single phase 230 VAC *, 16 A Fuzzy logic PID control Softstart function for smooth start-ups Set temperature and actual temperature Displayed for each control zone Pulse group control Temperature reduction possible during production interruptions Continuous error control procedure Dimensions: WxHxD = 259 x 95 x 290 mm Weight: 4.0 kg 11/14 Subject to technical changes

3 Heißkanaldüsen Typ SLT/-DLT DP6 up to 6 zones Order code DP6 2 x 230 VAC * / 16 A Easy-to-operate with separate displays and input keys Control of 6 regulating circuits 2-phase voltage supply through 16 A CEE connector (max. P = 7000 W) Connector assignment such as DP3/DP5 series BOOST and LOWER button on the front actual temperature display and level display for each zone quick-select keys make channel selection easy group selection, selection of several zones by means of quick-select buttons (such as DPT20) menu navigation such as in the DP3/DP5 series quick-select key for switching between set, actual and differential temperatures and initial manipulated variable soft-start and ramp function Dimensions: WxHxD = 259 x 95 x 290 mm Weight: 3.8 kg Cables to connect the controller with the hot-runner system are not included in the delivery Subject to technical changes 11/14

4 Heißkanaldüsen Typ SLT/-DLT DPT5 up to 5 zones, DPT10 up to 10 zones, DPT15 up to 15 zones DPT5 DPT10 DPT zones 230 VAC * / 10 A 5 zones 230 VAC * / 16 A 1-8 zones 230 VAC * / 10 A 9-10 zones 230 VAC * / 16 A 1-12 zones 230 VAC * / 10 A zones 230 VAC * / 16 A Menu-driven, multi-language operation via LCD display Combination of LED parallel display and LCD-operating unit Several temperature controllers (max. 5) can be linked by serial interface to form an easy-to-operate complete system Four selectable temperature programs Fuzzy PID control response Softstart to protect 230V components Set point and actual temperature displayed for each control zone Power limiting during start-up Ensures that all control circuits are heated evenly, even if the loads are different Pulse group control Temperature boost for ease of start-up Temperature reduction possible during production interruptions Diagnostic function to recognize wiring errors Up to 3500 W per each conrol zone (16 A) Continuous error control procedure Connectors for thermal and heating elements in separate locations Can be upgraded to up to 15 control zones Optional with serial interface connection to injection molding machines like ARBURG, ENGEL, KRAUSSMAFFEI, FERROMATIK etc. Dimensions: WxHxD = 468 x 142 x 345 mm Weight: 13.0 kg 11/14 Technische Änderungen vorbehalten

5 Heißkanaldüsen Typ SLT/-DLT DPT20 up to 20 zones, DPT25 up to 20 zones, DPT20 up to 20 zones, DPT20 up to 20 zones, DPT40 up to 20 zones, DPT45 up to 45 zones DPT20 DPT25 DPT30 DPT35 DPT40 DPT45 20 x 230 VAC * / 16 A 25 x 230 VAC * / 16 A 30 x 230 VAC * / 16 A 35 x 230 VAC * / 16 A 40 x 230 VAC * / 16 A 45 x 230 VAC * / 16 A Based on the DPT15 controllers, following features have been integrated into the new compact controllers DPT All control zones are 230 VAC * / 16 A Up to 3500 W per each control zone (16 A) Easy electrical connection diagram using 24-pin HANES connectors (cage-clamp terminals, no special tool like crimping pliers needed) Frontside main power switch Additional ON/OFF switch for the mold heaters Timer function for heating up the mold Automatically Compact, modern housing The zone selection keys makes the operation faster and more user-friendly There is a selection key behind each inscribed zone number Single or several zones can be selected by pressing the selection key. The display immediately changes to the set value input Mask of the selected zone. Upon selecting a zone by a keystroke, the set value can be changed immediately using the UP or DOWN key. By rapid actuation of two zone selection keys the block between the two zones is selected. Changes of the set value apply to all selected zones. Dimensions DPT20: WxHxD = 545 x 205 x 440 mm Weigth: 20.0 kg Dimensions DPT25-45: WxHxD = 545 x 345 x 440 mm Weigth: 20.0 kg Subject to technical changes 11/14

6 DPT multizone up to 150 zones for example DPT75 Fuzzy logic PID control Softstart to protect 230 VAC * components Set point and actual temperature displayed at each control Power limiting during start-up Ensures that all control circuits are heated evenly, even if the loads are different Phase gate control and pulse group control Temperature boost for ease of start-up Temperature reduction possible during production interruptions All control zones 230 VAC * / 16 A Diagnostic function to recognize wiring errors Up to 3500 W per each control zones (16 A) Continous error procedure Connectors for thermal and heating elements in separate locations Upgradable Optional with serial interface connection to injection molding machines like ARBURG, ENGEL, KRAUSSMAFFEI, FERROMATIK etc. Dimensions: WxHxD = 800 x 1100 x 580 mm Weight: ca. 100 kg 75 x 230 VAC * / 16 A Control cabinet to operate multi-cavity molds with a high number of cavities and extensive functions. Additional functions available by using the windows based platform: Color display of temperatures and status Graphic tool display Extensive collective functions for simultaneous processing of all control zones Error message in plain text Log files for error and status monitoring Temperature recording Thermo-dynamic diagnostic function Optional separate control to monitor two molds simultaneously Optional printing of programs and temperature records Load and store any number of programs Multiple remote maintenance options using standard PC interface connections (e.g. ISDN, Ethernet and Modem) 11/14 Technische Änderungen vorbehalten