Return 100Ω ±15Ω (db TYP) 1-10 MHz. 30 MHz
|
|
|
- Emily Wells
- 6 years ago
- Views:
Transcription
1 Description: is a Through Hole (THT) Integrated Connector Module with a single RJ45 in combination with 2USB ports. The internal magnetics are designed to support 10/100/1000Base-TX applications such as LAN-on-Motherboard (LOM) and PC applications. Features and Benefits: RoHS peak wave solder temperature rating 260 C USB module complies with USB 2.0 standards RJ45 connection meets CAT3, 5e, & 6 Fast Ethernet performance standard Electrical Performance Summary: Meets IEEE specification High performance for maximum EMI suppression Minimum 1500Vrms isolation per IEEE requirement RoHS Compliant Part Number Data Rate Turns Ratios Notes: 1. LEDs Left/Right: G = green; Y = yellow; O = Orange 2. G = Green with 250Ω internal resistor; Y = Yellow with 250Ω internal resistor Electrical 25 C Operating Temperature 0 C to +70 C LEDs Insertion Loss TX/RX (db MAX) 1-65 Return 100Ω ±15Ω (db TYP) Cross talk (db MIN) Common Mode Rejection (db TYP) TX RX L/R MIN JW0-0009NL 10/100 1CT:1 1CT:1 G/Y JY0-0016NL 10/100 1CT:1 1CT:1 G-O/Y JW0-0006NL 10/100/1000 1CT:1 1CT:1 G/G-Y JW0-0013NL 10/100/1000 1CT:1 1CT:1 G-O/Y Hipot (Vrms) (MIN) Part Number RJ45 Durability Testing Rating Mating Force (MAX) Unmating Force (MAX) Durability Plug to Jack Retention (MIN) JW/JY Series 5lbs./2.268kgs. 5lbs./2.268kgs. 500 Insertions 20lbs./9.072kgs. RJ45 Material Specification Part Shield Contact Housing MSL 2 3 Number Material Finish Material Plating Area Solder Area Material Specification Rating JW/JY 20-40µinches thick nickel Phosphor 15µ inches gold over µinches tin-lead over Series Brass over brass Bronze 30-80µ inches nickel µinches bright nickel Thermoplastic UL 94 V-0 1 NOTES: 1. Connector dimensions comply with FCC dimension requirements. 2. MSL = Moisture Sensitivity Level 3. NL parts are tin matte finish over nickel. USA Germany Singapore Shanghai China Taiwan pulseelectronics.com
2 JY0-0016NL Mechanicals USB Port (Top) USB Port (Bottom) 2 pulseelectronics.com
3 JW0-0006NL, JW0-0009NL Mechanicals USB Port (Top) USB Port (Bottom) 3 pulseelectronics.com
4 JW0-0013NL Mechanicals 4 pulseelectronics.com
5 JY0-0016NL Schematic 5 pulseelectronics.com
6 JW0-0009NL Schematic 6 pulseelectronics.com
7 JW0-0006NL Schematic PCB SIDE CABLE SIDE YELLOW GREEN GREEN Ω ±5% 270 Ω ±5% GREEN CATHODE GREEN CATHODE JW NL LEDs 7 pulseelectronics.com
8 JW0-0013NL Schematic JW0-0013NL LEDs 8 pulseelectronics.com
9 USB/RJ45 Application Note This line of Integrated Connector Modules are specifically designed for the implementation of a 10Base-T, 100Base- TX and 1000Base-TX transmission over data-grade unshielded twisted pair cable (UTP-3, 5/5e). The connectors provide excellent EMI filtering and are suitable for Desktop PC, Embedded Systems and Multiport Applications. Pulse has worked closely with the leading IC manufacturers in providing these 10/100/1000 solutions, thereby assuring compatibility with each transceiver. JW0 and JY0 series meet the stringent open circuit inductance requirements of IEEE. When an 8mA DC current is applied across the transformer windings, the transformer will provide at least 350µH. The transformers used in each module also provide 1500Vrms minimum isolation, wide bandwidth with minimal attenuation and fast rise times to minimise system level jitter. JW0-0013NL PCB Layout Recommendations: 1. For maximum EMI suppression (electromagnetic interference) place the decoupling capacitors adjacent to Vcc and 50W connections. 2. Connections to ground should be as short as possible. 3. Connections between the 10/100/1000 IC and the connector should be direct (ideally no change in direction) and of minimum length. For More Information Pulse Worldwide Headquarters World Trade Drive San Diego, CA U.S.A. Tel: Pulse Europe Einsteinstrasse 1 D Herrenberg Germany Tel: Pulse China Headquarters B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Road High-Tech Zone Nanshan District Shenzen, PR China Pulse North China Room 2704/2705 Super Ocean Finance Ctr Yan An Road West Shanghai China Pulse South Asia 135 Joo Seng Road #03-02 PM Industrial Bldg. Singapore Tel: Fax: Pulse North Asia 3F, No. 198 Zhongyuan Road Zhongli City Taoyuan County 320 Taiwan R. O. C. Tel: Fax: (Pulse) Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, Pulse Electronics, Inc. All rights reserved. 9 pulseelectronics.com
10 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Pulse: JW0-0009NL
Electrical 25 C Operating Temperature 0 C to +70 C
Description: 10/100Base-TX surface mount RJ45 single port (1X1) Tab-UP/DOWN with or without LEDs Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network Interface
GIGABIT (10/100/1000 BASE-T QUAD- & DUAL-TRANSFORMER MODULES AND UNFILTERED CONNECTORS
World s smallest Gigabit Quad- and Dual-isolation transformer modules All pairs are symmetrical and balanced Reliable surface mount ball grid array Compact footprint, reduced board space Designed to fit
10/100BASE-T SINGLE PORT, SMT TRANSFORMER
Meets IEEE802.3 and ANSI X3.263 standards, including 350 µh OCL with 8 ma DC bias Pin-compatible to Pulse Gigabit Ethernet part numbers H5004 and H5007 Part Number Electrical Specifications @ 25 C Operating
T1/CEPT/ISDN-PRI TRANSFORMERS
Dual Surface Mount, 1500 Vrms, Extended & Standard Temperature Range RoHS-6 peak reflow temperature rating: 245 C Dual SMT package contains transmit and receive transformers Models matched to leading transceiver
Electrical 25 C Operating Temperature 0 C to 70 C
For RoHS part add suffix NL 2 Peak solder temperature rating per Table 5-2 in IPC/JEDEC J-STD-020C IEEE 802.3af/ANSI X3.263 compliant performance Designed for IP phone or switch applications Electrical
POWER OVER ETHERNET (PoE) MAGNETICS 10/100BASE-TX VoIP Magnetics Modules
For RoHS part add suffix NL 4 RoHS NL peak solder rating 260 C, non-rohs peak solder rating 235 C C C IEEE 802.3af/ANSI X3.263 compliant performance Suitable for End-span and Mid-span PoE applications
ModularJacks. Amphenol Now You re Connected!
ModularJacks Amphenol Now You re Connected! Amphenol The Company Amphenol Commercial Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located
RH R13. Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow
To: Customer P/N: UDE P/N: Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow Spec No. RH20006-00 Update Date 2014/8/27 Revision C Approved
Customer P/N: UDE P/N: RUK-ZZ Description:
To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB stack Through Hole 10/100/1000 Base-T Contact Area : 30μ'' min. Gold LED: L-Green/Orange;R-Yellow Spec No. RUK17006-00 Update Date 2017/6/7
Circuit Assembly. building connections WORLDWIDE. SCA2 Connectors. Single Connector Attachment, 2nd Version. Circuit Assembly
Circuit Assembly. building connections WORLDWIDE SCA2 Connectors Single Connector Attachment, 2nd Version TM Circuit Assembly SCA2 from Circuit Assembly Regular Height Compliant Pin Receptacle Extended
SPECIFICATION FOR APPROVAL
PART NO.: XMG-9771-AE51131-246 Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xu Long CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY
ModularJacks. Amphenol
ModularJacks Amphenol Amphenol The Company Amphenol Commercial Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada.
SPECIFICATION FOR APPROVAL
PART NO.: XMV-9768-DD611A0-006 Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De XuLong CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY REJECTED
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion to
RH1-ZZ Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange
To: Customer P/N: UDE P/N: Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange Spec No. RH116037-00 Update Date 2016/11/1 Revision A Approved
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
RJ45 Modular Jack Connectors with Pulse Transformers
RJ Modular Jack Connectors with Pulse Transformers TM11RD - TANA Series Pulse Transformer Circuit Diagram Sep.1.218 Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Pulse Transformers
APPROVAL SHEET RJ45 1X1 DIP TAP DOWN GIGA WITH LED G/F3S. Address : Dongshan Industrial District, Nankang,Ganzhou Jiangxi
APPROVAL SHEET Customer Customer P/N Greenconn P/N Description 130-D309503C6H RJ45 1X1 DIP TAP DOWN GIGA WITH LED G/F3S Customer approval Supplier Supervisor Eric Engineer Tank GREENCONN TECHNOLOGY (GANZHOU)
Cat.8 Shielded Field Termination Plug Description
Description RiT s CAT8 Shielded field termination plug are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations.
0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
RJHS Series. RJ vistatm. EMI Quiet Modular Jacks with LED s. Specifications. Ordering Information EMI QUIET - WITH LEDS
EMI Quiet Modular Jacks with LED s is a family of EMI Quiet Modular Jack Connectors with built-in LEDs, meets Ethernet CAT 5 performance. This product is ideal for LAN applications such as adapter cards
RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
ModularJacks. Amphenol
ModularJacks Amphenol Amphenol Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
RA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA SERIES RoHS Compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11 Title: Part Number: Description: RJ-MAG Connector Product Specification RJMG21202XXXXXX RJmag 1 x 2-Port W/ LED Revisions Control Rev. ECN Number Originator
ModularJacks. Amphenol
ModularJacks Amphenol Amphenol Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS Compliant
Cat.8 Shielded Keystone Jack Description
Description RiT s CAT8 Shielded Keystone Jacks are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations. Phosphor
A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. To be discontinued. RoHS compliant
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms to FCC
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
ASIX USB-to-LAN Applications Layout Guide
ASIX USB-to-LAN Applications Revision 1.0 Dec. 11th, 2007 1 Revision Date Description 1.0 2007/12/11 New release. ASIX USB-to-LAN Applications Revision History 2 Content 1. Introduction...4 2. 4-Layer
COMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY 1 POLE - 40A (For automotive applications) FBR53-HW Series FEATURES Small 40A relay High temperature grade (-40 C to 125 C) Contact arrangement Form U (form A) Surface mount compatible
Elcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
decoupled connectors RF Coax Connectors Product Facts
Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount
MAX14535E Evaluation Kit. Evaluates: MAX14535E
19-4510; Rev 0; 3/09 General Description The MAX14535E evaluation kit (EV kit) demonstrates the MAX14535E double-pole/double-throw (DPDT) analog switch featuring negative signal capability, low onresistance
Without Indicator. With Indicator Model XM9B XM9B Contact Plating Specification 4: Gold Flash Plating
LAN Modular Jack Connectors XM9B Compact LAN Modular Jack Connectors Category 5e transmission performance met for 1, 2-3, 6 pairs. (Verified with connection to Omron XS5W-T421.) Models available with and
INTERCONNECT SOLUTIONS
INTERCONNECT SOLUTIONS Products Overview Connect with Us... Experience Makes the Difference Who We Are We have been designing and manufacturing interconnect products for over 40 years. Today we supply
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
ModularJacks. Amphenol
ModularJacks Amphenol Amphenol Amphenol Data/Telecom Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located in Toronto, Canada. Our activities
MAXIMUM LOAD CURRENT 1 A SJ SERIES
SOLID STATE RELAY MAXIMUM LOAD CURRENT 1 A SJ SERIES RoHS compliant FEATURES UL, CSA recognized Extremely small and light weight Size: 10.0 (W) 20.2 (L) 12.8 (H) mm Weight: approximately 5.5g High reliability,
6325 PCI Express Card Edge Connectors
GENERAL DESCRIPTION The standard vertical card edge connectors are specifically designed to implement PCI Express technology for desktop PCs and server systems. These connectors allow the end user to upgrade
PCI Express Right Angle Connectors
PCI Express Right Angle Connectors ED. 01 09.2015 Original Size PCI Express Right Angle Connector Catalog E 074641 DESCRIPTION GENERAL Right Angle Connectors These card edge connectors are designed to
TransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
COMPACT POWER RELAY (automotive applications) FTR-P3 Series. Preliminary. 1 POLE - 6A (For 24V car battery) FEATURES. Part Numbers
COMPACT POWER RELAY (automotive applications) 1 POLE - 6A (For 24V car battery) FEATURES Compact for high density packaging. High contact capacity with proven contact material. (100,000 operations, 28V,
DISCONTINUED (2009) RA4 SERIES. 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant. FEATURES Ultra high sensitivity
MINIATURE RELAY 4 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RA4 SERIES RoHS compliant FEATURES Ultra high sensitivity High reliability-bifurcated contacts Conforms to FCC rules and regulations Part 68 Dielectric
SFP (Small Form-factor Pluggable) Products
SFP (Small Form-factor Pluggable) Products As a founding member and innovator for the Small Form-factor Pluggable (SFP) Multi-Source Agreement (MSA), TE supports the market with a full range of SFP products.
Advance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission
FTR-K2G Series. 1 POLE - 20A, 3.0mm contact gap POWER RELAY FTR-K1 SERIES
POWER RELAY FTR-K1 SERIES 1 POLE - 20A, 3.0mm contact gap FTR-K2G Series FEATURES Contact gap min. 3.0mm Full disconnection 1 Pole, 1 Form A Maximum inrush current 120A (TV-8) (UL) (VDE) High insulation
LAN Magnetics Solution for 1000BASE-T Evaluation Board TDK Part number: ALT4532-EVA-01
LAN Magnetics Solution for 1000BASE-T Evaluation Board TDK Part number: ALT4532-EVA-01 Contents PCB area reduction from typical module to discrete placement Typical module TDK discrete placement 17.53
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
RJ45 10/100/1000 Base-T Jack with Magnetic Module
FEATURES: Excellent EMI suppression Meet IEEE 802.3 standards and FCC mechanical requirements Low Cost, Reflow-able device STANDARD SPECIFICATIONS at 25 C Operating Temperature: - 0 C to + 70 C Storage
New relay, production not started, engineering samples available. 1 POLE - 8A Reflow Solderable Relay
New relay, production not started, engineering samples available FTR-K1 SERIES POWER RELAY 1 POLE - 8A Reflow Solderable Relay JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO)
Amplifier for versatile fiber-optic links
Amplifier for Versatile Fiber-Optic Links Application Specification Author Document Number Revision 1 A.1 Amplifier for versatile fiber-optic links Suitable for extending the optical transmission distance
Modular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
TQQ MHz LTE Band 3 Uplink BAW Filter
Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss
Control Devices Surface Mount Input-Limiting Diode Element
GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
Maximum Load Current 3A SG Series
Non-promotional not for new designs FTR-K1 SERIES SOLID STATE RELAY Maximum Load Current 3A SG Series FEATURES Conforms to UL, CSA Standards Slim, SIL Terminal Type - Size: 9.0 (W) 40.0 (L) 20.0(H) mm
DM9051NP Layout Guide
NP Version: 1.1 Technical Reference Manual Davicom Semiconductor, Inc Version: NP-LG-V11 1 1. Placement, Signal and Trace Routing Place the 10/100M magnetic as close as possible to the (no more than 20mm)
EXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
2 POLES - 2 A (Slim Profile Signal Relay)
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Slim Profile Signal Relay) FTR-B4 Series FEATURES DPDT 2C Ultra miniature slim type relay for surface mounting Height: 9.3 mm maximum (THT) 10 mm maximum
28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion to
SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES NOT FOR NEW DESIGN FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-616 Revision: 1.1 Issue Date: OCT. 25, 2007 HAMBURG INDUSTRIES CO., LTD. 6FL., NO.12, Lane 270, SEC. 3, Pei Shen RD., Shen Keng Hsiang, Taipei Hsien, Taiwan
RClamp3374N. High Power TVS for Ethernet Interfaces. PRELIMINARY Features
PROTECTION PRODUCTS - RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage
zsfp+ (Small Form-factor Pluggable Plus) 25 Gbps Interconnect System
Molex launches the first complete for serial channels, delivering unparalleled signal integrity with superior EMI protection for next-generation Ethernet and Fibre Channel applications Molex s complete
2 POLES - 2 A (Low Profile Signal Relay) (b) Terminal type C : Through hole G : Surface mount S : Surface mount, space saving
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
ICS548A-03 LOW SKEW CLOCK INVERTER AND DIVIDER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS548A-03 Description The ICS548A-03 is a low cost, low skew, high-performance general purpose clock designed to produce a set of one output clock, one inverted output clock, and one clock divided-by-two.
SPECIFICATION OF IC CARD ACCEPTOR. Model No.: ICA-610 Revision: 1.0 Issue Date: MAR. 09, 2006
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-610 Revision: 1.0 Issue Date: MAR. 09, 2006 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
250 Mbps Transceiver in LC FB2M5LVR
250 Mbps Transceiver in LC FB2M5LVR DATA SHEET 650 nm 250 Mbps Fiber Optic Transceiver with LC Termination LVDS I/O IEC 61754-20 Compliant FEATURES LC click lock mechanism for confident connections Compatible
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
USBDEVELKIT DEVELOPMENT KIT V3
USB interface Back auxiliary connector for external sensors RoHS-compatible & Pb-free Flash software upgradeable through USB Software compatible with windows 7 / XP Recording software DESCRIPTION The USB
PRODUCT SPECIFICATION TITLE PAGE REVISION
1 of 14 A 1.0 OBJECTIVE This specification defines the performance, test quality and reliability requirement of the Micro Serial-ATA Host and Device connectors. 2.0 SCOPE This specification is applicable
POWER RELAY. NY Series. 1 POLE - 5A Slim Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Type NY Series FEATURES Slim type with 5 mm thickness - Suited for high density mounting Low power consumption and high sensitivity - Nominal coil power: 120
Basler Accessories. Technical Specification dart I/O BOARD
DRAFT Basler Accessories Technical Specification dart I/O BOARD Order Numbers 106896 dart I/O Board Starter Kit 106897 dart I/O Boards (5 Pieces) 2000035665 dart I/O Board Mounting Kit Document Number:
Modular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
2BB0535T2Ax-17 Target Data Sheet
2BB0535T2Ax-17 Base Board for 2SC0535T SCALE-2 drivers for 1700V IGBT modules with a combined electrical/fiber-optic interface for 2-level, 3-level and multilevel converter topologies with paralleling
Y.COM.TW WWW. 0Y.COM.TW WW. Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L
The D-sub Connector Series Enters a New Era with Lead-free Products. Determine anchor screw diameters at a glance. Greatly simplified anchor combinations..t.100y. Shielded against EMI..T EMI/RFI shielded
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
Product Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
ULTRA MINIATURE RELAY. FTR-B3 Series. 2 POLES - 2 A (Low Profile Signal Relay) FTR-K1 SERIES FEATURES
FTR-K1 SERIES ULTRA MINIATURE RELAY 2 POLES - 2 A (Low Profile Signal Relay) FTR-B3 Series FEATURES DPDT 2C Ultra miniature low profile relay with high heat resistant material Height: 5.45mm, Weight: 0.85g,
PLR0514LC ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION DFN-10 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance, 4-channel steering diode/tvs array. This device is designed to protect computing applications such as Gigabit
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
Product specification
SMT Modular Jack single port vertical and horizontal 1 of 12 H PAGE 1.0 OBJECTIVE 2 2.0 SCOPE 2 3.0 GENERAL 2 4.0 DEFINITIONS 3.1 Qualification 2 3.2 Material 2 3.3 Finish 2 3.4 Design and construction
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT
zsfp+ (SFP28) 28 GBPS PLUGGABLE I/O INTERCONNECT The zsfp+ interconnect is currently one of the fastest single-channel I/O connectors on the market today, transferring data at 28 Gbps with possible expansion
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 3.0, BMI Wire-to-Wire BMI Connector System Americas Headquarters isle, Illinois
MAX5097A Evaluation Kit. Evaluates: MAX5097A
19-0718; Rev 0; 1/07 MAX5097A Evaluation Kit General Description The MAX5097A evaluation kit (EV kit) demonstrates the MAX5097A in a standard application circuit demonstrating high efficiency. The EV kit
JV SERIES 1 POLE 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) JV SERIES RoHS compliant FEATURES UL, CSA, VDE, SEMKO recognized UL class B (130 C) insulation Low profile and space saving Height: 12.5 mm Mounting space:
StarServe Harmonicas. Wiring Instructions. Shallow. Deep. Angled. Telephone Modules 8052/4RJ 8052/4RJDMB 8052/4RJSMB Angled 3105ATPP2X4
Shallow Deep Angled StarServe Harmonicas Telephone Modules 802/RJ 802/RJDMB 802/RJSMB Angled 310ATPP2X Data / Patching Modules 808/8RJDMB 808/8RJSMB Angled 310APP8/E 310APP8/6 Wiring Instructions Table
HSSDC. HSSDC High Speed Serial Data Connection receptacles. HSSDC Receptacle. U45 - A APPLICATIONS ORDERING INFORMATION
HSSDC High Speed Serial Data Connection receptacles meet high-speed differential communication protocols with speeds exceeding 1 Gbps such as IEEE 802.3z and Fibre Channel. This system is designed to conform
FBR57 Series. COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FTR-K1 SERIES FEATURES
FTR-K1 SERIES COMPACT HIGH POWER RELAY 1 POLE - 30A (28VDC) (For 24V battery automotive applications) FBR57 Series FEATURES High power contact capacity (carrying current: 40 A/10 minutes, 30 A/1 hour)
FTR-K1 HIGH CAPACITY 20A TYPE
FTR-K1 HIGH CAPACITY 20A TYPE 1 POLE - Power Relay FTR-K1 Series FEATURES High capacity 20A (1 form A type) Low profile (height: 15.7mm) High insulation. Insulation distance: min. 10mm between coil and
Aug04 Rev D EC
Product Specification 108-1163 18Aug04 Rev D EC 0990-1127-04 Modular Plugs, Thru-Hole and Surface Mount Jacks, Data and Telephone, PCB Mounted 1. SCOPE 1.1. Content This specification covers the performance,
POWER RELAY. FTR-MY Series. 1 POLE - 5A Slim Power Relay FTR-K1 SERIES FEATURES. APPLICATIONS PLC, I/O module inverter control
FTR-K1 SERIES POWER RELAY 1 POLE - 5A Slim Power Relay FTR-MY Series FEATURES Width 5mm, height 12mm (31% smaller than NY series) area 100 mm 2, super slim, low power, compact and light weight 2.5gr. Nominal
COMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY 1 POLE - 30A (For automotive applications) FBR3 Series FEATURES Compact for high density packaging High contact capability (30A continuous) High temperature grade (-40 C to 12