RJ45 Modular Jack Connectors with Pulse Transformers

Transcription

1 RJ Modular Jack Connectors with Pulse Transformers TM11RD - TANA Series Pulse Transformer Circuit Diagram Sep Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Pulse Transformers Support FastEthernet Equipped with built-in insulation transformers and common mode choke coils, withstanding voltage of 1. kv and supporting 1Base-Tx and 1Base-T. 2. Incorrect Plug Insertion Prevention Key A built-in key offers protection against insertion of 6- conductor type modular plug.. Built-in optical indicators Optical indicators are integral part of the connectors, saving space on the board. There is no emission of any electrical noise.. EMI protection Metal shield covers the outer surfaces of the connectors assuring complete protection against electromagnetic interference.. FCC standards Meets requirements of FCC Title, Part 68, Subpart F. 6. Environmental considerations Plating compounds are lead-free. Applications Notebook PC's, telecommunication hubs, routers, bridges and ATM transmission equipment, Ethernet switches and networking equipment, office equipment, test and measurement equipment. TD+ 1 CT TX- 2 RD+ CT 6 RD- 8 GRAND PCB Insulated transformer Circuit Outline of mating plug Choke coil 1 TX+ 2 TX- RX+ 6 RX- 8 RJ RJ11 (6 position) plug insertion prevention Built-in optical indicators Light pipe Incorrect Plug Insertion Prevention Key * Light colors are determined by the color of LED's used

2 Product Specifications Ratings Voltage rating 12V AC Operating temperature range: -2ç to +8ç (Note) Sep Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Connector Pulse transformer Materials Insulator Contacts 1.Insertion resistance 2.Insulation resistance.withstanding voltage.insertion resistance.return loss 6.Inductance.Cross talk (Reference) Component Material Finish/Color Remarks Shield Incorrect insertion prevention key Pulse transformer Optical pipe Item Specification Conditions 8.Common mode rejection ratio (Reference) -2 min. 1M ohms min. No flashover or insulation breakdown. -1 min. -2 max. -16 max. -12 max. -1 max. μh min. - max. - max. - max. - max. -2 max. Note: Includes temperature rise caused by current flow. Ordering information PBT Copper alloy Copper alloy Stainless Polycarbonate TM11 R D - T A NA - A LP to 6 1V DC Basic terminal between Primary (RJ side) to secondary (PCB side) Terminal to shield 1 to 6 1 to 1 1 to to 6 6 to 8.1V, 1KHz, 8mADC 1 to to 6 6 to 1 1 to to 1 Black Contact area : Gold plated Termination area: Tin plated Tin plated Clear Series name Connector type Direction of locking lever : TM11 R: Jack D: Down V AC / one minute 1V AC / one minute 1V AC / one minute UL9V- UL9V-- (mating plug) Jack suffix number : Transformer T: With transformer Transformer type A: Transformer circuit type Incorrect insertion prevention key NA-A: With built-in key Jack opening code 8: 8 contacts Number of inserted contacts 8: 8 contacts Optical pipe LP: With optical pipe inserted Blank: Without optical pipe 2

3 Modular Jack Connectors (With built-in optical pipe) Sep Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Part Number CL No. RoHS TM11RD-TANA-A-88-LP CL YES BRecommended PCB mounting pattern Board side 2.MIN 11. No conductive traces 1.MAX MIN BPulse Transformer Circuit Diagram Printed board edge Ø.2 Ø1.6 8-Ø.9 LED center position TD+ 1 1 TX+ CT TD- 2 1CT:1CT 2 TX- RD+ RX+ CT 6 RD- 8 1CT:1CT 6 RX- Cable side Suggested dimensions of LEDs LED light emitting center 2.MAX.2MAX 1.MAX CHS GROUND ø ø ø.1μf ø 8 Precautions 1 Hirose Electric did not check the compatibility with the PHY chip. When replacing other manufacturers jack it is recommended to verify the compatibility with the actual equipment. 2 This connector is mounted on the board using wave or manual soldering. Do not use reflow soldering. Recommended board thickness: 1.6mm To assure correct operation of the indicator light pipes LED's must be installed directly on the PCB, within recommended dimensions and with light emitting center in upward direction. Mount the LED so that the center of the light emitting center aligns with the center point as dimensioned on the Recommended PCB mounting pattern above. 6 Verify the actual LED's mounting pattern with it's manufacturer, then add it to the PCB mounting pattern, assuring the correct placement of the center point. IPA cleaning at room temperature is recommended for the cleaning of this product. When an aqueous cleaning agent is to be used, there is a concern that the light pipe (made of polycarbonate resin) may change color; therefore, please make a selection based on a table showing the effects on the resin.these tables are issued by the various manufacturers of cleaning agents.

4 Modular Jack Connectors (Without built-in optical pipe) Sep Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Board side. 6.2 Part Number TM11RD-TANA-A-88 BRecommended PCB mounting pattern No conductive traces 2..MIN. TD+ CT 1 1 RD+ RX+ 6 TX+ CT MIN MAX CL No. CL Printed board edge 8-Ø.9 Ø.2 Ø1.6 BPulse Transformer Circuit Diagram RoHS YES TD- 2 1CT:1CT 2 TX- RD- 8 1CT:1CT 6 RX- Cable side CHS GROUND ø ø ø.1μf ø 8 Precautions 1 2 Hirose Electric did not check the compatibility with the PHY chip. When replacing other manufacturers jacks it is recommended to verify the compatibility with the actual equipment. This connector is mounted on the board using wave or manual soldering.do not use reflow soldering. Recommended board thickness: 1.6mm IPA cleaning at room temperature is recommended for the cleaning of this product. When an aqueous cleaning agent is to be used, there is a concern that the light pipe (made of polycarbonate resin) may change color; therefore, please make a selection based on a table showing the effects on the resin.these tables are issued by the various manufacturers of cleaning agents.

5 Technical Data Measurement results of electrical characteristics Insertion Loss Insertion Loss Sep Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Reflection Loss Crosstalk (Reference) Reflection Cross Talk Common Mode Rejection Ratio (Reference Value) -1-2 CMRR

6 Powered by TCPDF ( NOTES : Sep Copyright 218 HIROSE ELECTRIC CO., LTD. All Rights Reserved. USA: HIROSE ELECTRIC(U.S.A.), INC Westhills Court, Simi Valley, CA Phone : Fax : UNITED KINGDOM: HIROSE ELECTRIC UK LTD. Crownhill Business Centre 22 Vincent Avenue Crownhill, Milton Keynes MK8 OAB Phone : 198 Fax : HONG KONG: HIROSE ELECTRIC CO., LTD. Unit 6, Energy Plaza. 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : Fax : GERMANY: HIROSE ELECTRIC GmbH Herzog-Carl-Strasse D-6 Ostfildern (Scharnhauser Park) Phone : Fax : KOREA: HIROSE KOREA CO., LTD. (#2NA11,Shihwa Industrial Complex), , Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,12 Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. No.28 Lane 2 Sec. 2 Yen Ping N,Rd.Taipei Phone : ,2 Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Beechavenue 6,1119 PV Schiphol-Rijk Phone : Fax : CHINA: HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD. -6,Bund Center,222 Yan An Road(E),Shanghai 22 Phone : Fax : SINGAPORE: HIROSE ELECTRIC CO., LTD. 1 Anson Road #-1 International Plaza 99 Phone : Fax : ,OSAKI -CHOME,SHINAGAWA-KU,TOKYO 11-88,JAPAN PHONE: , FAX: The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.