PMC66-SIO4BXR. Features:

Transcription

1 66-SIO4BXR Four hannel High erformance Serial I/O ard Featuring /RS232/RS423 Software onfigurable Transceivers and 32K Byte FIFO Buffers (256K Byte Total) The 66-SIO4BXR is a four channel serial interface card which provides high speed, full-duplex, multi-protocol serial capability for applications. The 66-SIO4BXR combines multi-protocol Dual Universal Serial ontrollers, deep external FIFOs, and software selectable multi-protocol transceivers to provide four fully independent synchronous/asynchronous serial channels. These features, along with a high performance 66Hz I interface engine, give the 66-SIO4BXR unsurpassed performance in a serial interface card. Features: Four Independent rotocol Serial hannels Serial ode rotocols include Asynchronous, onosync, Bisync, SDL, HDL, ine-bit, and IEEE Synchronous Serial Data Rates up to 10bps Asynchronous Serial Data Rates up to 1bps Independent Transmit and Receive FIFOs for each channel - Up to 32K byte each ultiprotocol Transceivers support RS422 (V.11)/RS485, RS423 (V.10), RS232 (V.28),, and RS530 arity and R detection capability rogrammable Oscillators provide flexibility for Baud Rate lock generation Rear IO onnection SSI type 68 pin front edge I/O onnector Eight signals per channel, configurable as DTE or DE: 3 Serial locks (Tx,Rx,Aux), 2 Serial Data signals (TxD,RxD), TS, RTS, DD Unused signals may be reconfigured as General urpose IO Fast Differential able Transceivers rovide Data Rates up to 10bps RS423 and RS232 able Transceivers rovide Data Rates up to 230kbps Industry Standard Zilog Z1630 rotocol Universal Serial ontrollers (US ) Standard able to four DB25 connectors and ustom ables available Available drivers include VxWorks, WinT, Win2k, WinX, Linux, and Labview Industrial Temperature Option Available ay be mounted on various adapters to fit I, Ie, XI, and ci form factors

2 Functional Diagram: The 66-SIO4BXR is a high performance, four channel serial board from the SIO4BX product line from General Standards orporation. The 66-SIO4BXR has a 66Hz I interface, multi-protocol transceivers, and supports the Rear IO. This card may also be mounted on various adapters to fit I, Ie, XI, and ci form factors. han kb Rx FIFO Universal Serial ontroller Receiver protocol Transceiver DTE able Interface /I Bus 1 / 2 66Hz 32 bit I Interface 32kb Tx FIFO Transmitter DE 68 pin SSI 5 ontrol Logic rog Osc Rear IO (4) Universal Serial ontroller Data odes: Asynchronous Sample rates of 1/16, 1/32/ or 1/64 lock Rate. rogrammable Start/Stop/arity Bits Isochronous 1x Synchronous locking. rogrammable Start/Stop/arity Bits Async with ode Violations Start Bit replaced with Three Bit ode Violation attern as in IL-STD-1553B onosync Single haracter used for Synchronization Bisync Two haracters used for Synchronization HDL Receiver recognizes Flags, Optional Address atching, Zero Deletion, and R hecking Bisync Transparent Sync attern is DLE-SY rogrammable. inebit Additional Address/Data bit between arity and Stop Bits Implements Data Format of with 16 bit Address ompare Slaved onosync Transmit Data is Synchronized to Received Data HDL Loop Transmitter Echoes Received essages Universal Serial ontroller Data Encoding: RZ RZB RZI-ark RZI-Space Biphase ark Biphase-Space Biphase Level Differential Biphase Level See Zilog Z1630 data sheet at for detailed Universal Serial ontroller apabilities

3 ower Requirements o ): +5VD ±0.2 VD at 1.5 Amps ax(typical 1.0 Amps) +12VD ±0.2 VD at 0.03 Amps ax(typical 0.02 Amps) Typical Total ower Dissipation: ~5.25W ompatibility: 32bit / 66Hz I r2.2 ompliant Direct master DA transfer rovides a single multifunction interrupt (ITA) 3.3V IO / 5V tolerant I bus interface hysical haracteristics: onforms to ezzanine Specification Length: 149 mm Width: 74 mm 5 mm 152 mm 149 mm 7 1 J2 10 mm 5 B E Z E L rotocol rotocol rotocol rotocol FGA J5 2 I Bridge SIO4BXEV:D GEERAL STADARDS OR. () mm AX omponent Height 4.7mm AX omponent Height 3.5mm Environmental Specifications: Ambient Temperature Range: Operating: 0 o to +70 o (ommercial Option) -40 o to +85 o (Industrial Option) Storage: -40 o to +85 o Relative Humidity: Operating: 0 to 80%, non-condensing Storage: 0 to 95%, non-condensing Altitude: Operation to 10,000 ft ooling Requirements: onventional air-cooling, 200 LF (typical mezzanine environment) Ordering Information: 66 SIO4BXR - <FIFO Size> - <Temperature> Option Valid Selections Description FIFO Size 48KL (software selectable) 4K byte Tx / 8K byte Rx FIFO or 8K byte Tx / 4K byte Rx FIFO 64K software selectable) 8K byte Tx / 16K byte Rx FIFO or 16K byte Tx / 8K byte Rx FIFO 256K 32K byte Tx / 32K byte Rx FIFO Temperature <blank> 0 o to +70 o ommercial (Standard) I -40 o to +85 o Industrial

4 System I/O onnections: User I/O onnector:: 68-pin SSI connector (female) - 5 art umber: A/TYO ating onnector: A/TYO (or equivalent) in 34 in 1 in 68 in 35 ote: rotocol ode is set on a per channel basis. in RS232 RS423 in RS232 RS423 DTE DE DTE DE DTE DE DTE DE DTE DE DTE DE 1 AUX1+ Unused TX1 RX1 35 AUX3+ Unused TX3 RX3 2 AUX1- AUX1 RX1 TX1 36 AUX3- AUX3 RX3 TX3 3 DD1+ Unused TXD1 RXD1 37 DD3+ Unused TXD3 RXD3 4 DD1- DD1 RXD1 TXD1 38 DD3- DD3 RXD3 TXD3 5 TS1+ RTS1+ Unused Unused 39 TS3+ RTS3+ Unused Unused 6 TS1- RTS1- TS1 RTS1 TS1 RTS1 40 TS3- RTS3- TS3 RTS3 TS3 RTS3 7 RXD1+ TXD1+ Unused Unused 41 RXD3+ TXD3+ Unused Unused 8 RXD1- TXD1- RXD1 TXD1 Unused 42 RXD3- TXD3- RXD3 TXD3 Unused 9 RX1+ TX1+ Unused Unused 43 RX3+ TX3+ Unused Unused 10 RX1- TX1- RX1 TX1 Unused 44 RX3- TX3- RX3 TX3 Unused 11 RTS1+ TS1+ Unused Unused 45 RTS3+ TS3+ Unused Unused 12 RTS1- TS1- RTS1 TS1 RTS1 TS1 46 RTS3- TS3- RTS3 TS3 RTS3 TS3 13 TXD1+ RXD1+ Unused Unused 47 TXD3+ RXD3+ Unused Unused 14 TXD1- RXD1- TXD1 RXD1 Unused 48 TXD3- RXD3- TXD3 RXD3 Unused 15 TX1+ RX1+ Unused Unused 49 TX3+ RX3+ Unused Unused 16 TX1- RX1- TX1 RX1 Unused 50 TX3- RX3- TX3 RX3 Unused 17 SGD1 SGD1 SGD1 51 SGD3 SGD3 SGD3 18 SGD2 SGD2 SGD2 52 SGD4 SGD4 SGD4 19 TS2+ RTS2+ Unused Unused 53 TS4+ RTS4+ Unused Unused 20 TS2- RTS2- TS2 RTS2 TS2 RTS2 54 TS4- RTS4- TS4 RTS4 TS4 RTS4 21 RXD2+ TXD2+ Unused Unused 55 RXD4+ TXD4+ Unused Unused 22 RXD2- TXD2- RXD2 TXD2 Unused 56 RXD4- TXD4- RXD4 TXD4 Unused 23 RX2+ TX2+ Unused Unused 57 RX4+ TX4+ Unused Unused 24 RX2- TX2- RX2 TX2 Unused 58 RX4- TX4- RX4 TX4 Unused 25 RTS2+ TS2+ Unused Unused 59 RTS4+ TS4+ Unused Unused 26 RTS2- TS2- RTS2 TS2 RTS2 TS2 60 RTS4- TS4- RTS4 TS4 RTS4 TS4 27 TXD2+ RXD2+ Unused Unused 61 TXD4+ RXD4+ Unused Unused 28 TXD2- RXD2 - TXD2 RXD2 Unused 62 TXD4- RXD4- TXD4 RXD4 Unused 29 TX2+ RX2+ Unused Unused 63 TX4+ RX4+ Unused Unused 30 TX2- RX2- TX2 TX2 Unused 64 TX4- RX4- TX4 RX4 Unused 31 DD2+ Unused TXD2 RXD2 65 DD4+ Unused TXD4 RXD4 32 DD2- DD2 RXD2 TXD2 66 DD4- DD4 RXD4 TXD4 33 AUX2+ Unused TX2 RX2 67 AUX4+ Unused TX4 RX4 34 AUX2- AUX2 RX2 TX2 68 AUX4- AUX4 RX4 TX4 Table 1- Front anel (5) IO onnections

5 System I/O onnections (cont): in 64 in 2 4 in 63 in 1 ote: rotocol ode is set on a per channel basis. in RS232 RS423 in RS232 RS423 DTE DE DTE DE DTE DE DTE DE DTE DE DTE DE 1 TX1- RX1- TX1 RX1 Unused 33 TX3- RX3- TX3 RX3 Unused 2 TX1+ RX1+ Unused Unused 34 TX3+ RX3+ Unused Unused 3 TXD1- RXD1- TXD1 RXD1 Unused 35 TXD3- RXD3- TXD3 RXD3 Unused 4 TXD1+ RXD1+ Unused Unused 36 TXD3+ RXD3+ Unused Unused 5 RTS1- TS1- RTS1 TS1 RTS1 TS1 37 RTS3- TS3- RTS3 TS3 RTS3 TS3 6 RTS1+ TS1+ Unused Unused 38 RTS3+ TS3+ Unused Unused 7 AUX1- AUX1 RX1 TX1 39 AUX3- AUX3 RX3 TX3 8 AUX1+ Unused TX1 RX1 40 AUX3+ Unused TX3 RX3 9 DD1- DD1 RXD1 TXD1 41 DD3- DD3 RXD3 TXD3 10 DD1+ Unused TXD1 RXD1 42 DD3+ Unused TXD3 RXD3 11 RX1- TX1- RX1 TX1 Unused 43 RX3- TX3- RX3 TX3 Unused 12 RX1+ TX1+ Unused Unused 44 RX3+ TX3+ Unused Unused 13 RXD1- TXD1- RXD1 TXD1 Unused 45 RXD3- TXD3- RXD3 TXD3 Unused 14 RXD1+ TXD1+ Unused Unused 46 RXD3+ TXD3+ Unused Unused 15 TS1- RTS1- TS1 RTS1 TS1 RTS1 47 TS3- RTS3- TS3 RTS3 TS3 RTS3 16 TS1+ RTS1+ Unused Unused 48 TS3+ RTS3+ Unused Unused 17 TX2- RX2- TX2 TX2 Unused 49 TX4- RX4- TX4 RX4 Unused 18 TX2+ RX2+ Unused Unused 50 TX4+ RX4+ Unused Unused 19 TXD2- RXD2 - TXD2 RXD2 Unused 51 TXD4- RXD4- TXD4 RXD4 Unused 20 TXD2+ RXD2+ Unused Unused 52 TXD4+ RXD4+ Unused Unused 21 RTS2- TS2- RTS2 TS2 RTS2 TS2 53 RTS4- TS4- RTS4 TS4 RTS4 TS4 22 RTS2+ TS2+ Unused Unused 54 RTS4+ TS4+ Unused Unused 29 AUX2- AUX2 RX2 TX2 55 AUX4- AUX4 RX4 TX4 30 AUX2+ Unused TX2 RX2 56 AUX4+ Unused TX4 RX4 25 DD2- DD2 RXD2 TXD2 57 DD4- DD4 RXD4 TXD4 26 DD2+ Unused TXD2 RXD2 58 DD4+ Unused TXD4 RXD4 27 RX2- TX2- RX2 TX2 Unused 59 RX4- TX4- RX4 TX4 Unused 28 RX2+ TX2+ Unused Unused 60 RX4+ TX4+ Unused Unused 29 RXD2- TXD2- RXD2 TXD2 Unused 61 RXD4- TXD4- RXD4 TXD4 Unused 30 RXD2+ TXD2+ Unused Unused 62 RXD4+ TXD4+ Unused Unused 31 TS2- RTS2- TS2 RTS2 TS2 RTS2 63 TS4- RTS4- TS4 RTS4 TS4 RTS4 32 TS2+ RTS2+ Unused Unused 64 TS4+ RTS4+ Unused Unused Table 2- (4) Rear IO onnections General Standards orporation assumes no responsibility for the use of any circuits in this product. o circuit patent licenses are implied. Information included herein supersedes previously published specifications on this product and is subject to change without notice.