KANTECH SPECIAL READERS POLARIS MAGSTRIPE READERS TECHNICALTIP

Transcription

1 336 Part No P600 P600/P325XSF/P225XSF P325KPXSF/P225KPW26 P10SHL P325XSF P225XSF P325KPXSF P225KPW26 IOPROX READERS P225XSF IOPROX reader MULLION XSF format, typical read range up to 16.5cm, dimensions: x 44.5 x 21.3mm P225W IOPROX reader MULLION Wiegand 26 format, typical read range up to 16.5cm, dimensions: x 44.5 x 21.3mm P225KPXSF IOPROX MULLION reader with keypad, XSF format, typical read range up to 16.5cm, dimensions: x 44.5 x 21.3mm P225KPW IOPROX MULLION reader with keypad, Wiegand 26 format, typical read range up to 16.5cm, dimensions: x 44.5 x 21.3mm P325XSF IOPROX reader XSF FORMAT, typical read range up to 20.5cm, dimensions: x 71.1 x 21.3mm P325W IOPROX reader Wiegand 26 format, typical read range up to 20.5cm, dimensions: x 71.1 x 21.3mm P325KPXSF IOPROX SINGLE GANG reader with keypad, XSF format, typical read range up to 20.5cm, dimensions: x 71.1 x 21.3mm P325KPW IOPROX SINGLE GANG reader with keypad, Wiegand 26 format, typical read range up to 20.5cm, dimensions: x 71.1 x 21.3mm SPECIAL READERS P IoProx proximity long range reader, unshielded cable, extended secure format and Weigand 26 bit selectable (black). P600 compatible proximity cards: P10SHL (standard card), P20DYE (dye-sub card), P30DMG (dye-sub card with non encoded mag-stripe) and P40KEY (keytag) KP Keypad, indoor/outdoor, vandal resistant (BCD output) ES-KTP/103SN Keypad, indoor/outdoor, vandal resistant, 26-bit Wiegand IOPROX CARDS AND TAGS P10SHL IoProx proximity card (standard), XSF/26 bit Wiegand P20DYE Thin IoProx proximity card, front/back surface glossy for dye-sub printing, XSF/26 bit Wiegand P30DMG Thin IoProx proximity card with blank magstripe, XSF/26 bit Wiegand P40KEY IoProx proximity key tag, XSF/26 bit Wiegand P20DYE POLARIS MAGSTRIPE READERS POL Polaris2 magstripe reader (indoor/outdoor) POL-25M Polaris2 magstripe reader with 5m (16") cable (indoor/oudoor) POL-2KP Polaris2 magstripe reader with integrated keypad (indoor/outdoor) POL-2KP-5M Polaris2 magstripe reader with integrated keypad, 5m (16') cable (indoor/outdoor) P30DMG POLARIS MAGSTRIPE CARDS POL-C1CN Polaris magstripe card, pre-programmed, high coercivity (also includes bar code) (minimum quantity 50, increment quantity 50) POL-C5CN Polaris magstripe card, pre-programmed, high coercivity (also includes bar code), glossy front surface for dye-sub printing (minimum quantity 50, increment quantity 50) POL-C6CN Polaris magstripe, pre-programmed, high coercivity, glossy front surface for dye-sub printing (minimum quantity 50, increment quantity 50) P40KEY POL-2KP TECHNICALTIP IoProx readers 26 bit Wiegand format is the perfect solution for use with virtually any Access Control system in the market. This is so long as the software can accept multiple site codes as card numbers are not reproduced for specific sites, each card is unique. This greatly reduces the error and delivery times for IoProx cards and ensures a very high level of security. TECHNICALTIP As IoProx cards are dual format, the same card can be used for an XSF Kantech format IoProx reader or 26 bit Wiegand IoProx reader.

2 Part No 337 FINGERPRINT READERS VPRX-IO-XSF VERIPROX fingerprint verification reader with integrated IoProx proximity card reader (XSF Kantech format). Self-contained unit stores 4000 fingerprint templates. Verifies a user in less than one second VPRX-IO-W VERIPROX fingerprint verification reader with integrated IoProx proximity card reader (26-bit Wiegand format). Self-contained unit stores 4000 fingerprint templates. Verifies a user in less than one second VPRX-IO-XSF ACCESS CONTROL DESIGN MATRIX No. Read Reader Software Controllers Lock PSU's Egress Locks Cards B'glass Doors Range Type Relays (REX) cm P225 XSF Entra-SE KT-100 KT-RM1 x 1 TR1640W-220 x 1 DRB001N x 1 G10001 (Maglock) P10SHL BG1G x cm P225KP XSF PS100 x 1 or P40KEY cm P225 XSF Entra-SE KT-300-EU-8K x 1 KT-RM1 x 2 PS100 x 2 DRB001N x 2 G10001 (Maglock) P10SHL BG1G x 2 73cmcm P600XSF cm P225 XSF Entra-SE KT-300-EU-8K x 2 KT-RM1 x 4 PS100 x 4 DRB001N x 4 G10001 (Maglock) P10SHL BG1G x cm P225 XSF Entra-SE KT-300-EU-8K x 3 KT-RM1 x 6 PS100 x 6 DRB001N x 6 G10001 (Maglock) P10SHL BG1G x cm P225 XSF Entra-SE KT-300-EU-8K x 4 KT-RM1 x 8 PS100 x 8 DRB001N x 8 G10001 (Maglock) P10SHL BG1G x cm P225 XSF Entra-SE KT-300-EU-8K x 5 KT-RM1 x 10 PS100 x 10 DRB001N x 10 G10001 (Maglock) P10SHL BG1G x cm P225 XSF Entra-SE KT-300-EU-8K x 6 KT-RM1 x 12 PS100 x 12 DRB001N x 12 G10001 (Maglock) P10SHL BG1G x cm P225 XSF Entra-SE KT-300-EU-8K x 7 KT-RM1 x 14 PS100 x 14 DRB001N x 14 G10001 (Maglock) P10SHL BG1G x cm P225 XSF Entra-SE KT-300-EU-8K x 8 KT-RM1 x 16 PS100 x 16 DRB001N x 16 G10001 (Maglock) P10SHL BG1G x 16

3 338 Part No ENTRAPASS SOFTWARE KT-300EU The KT-300EU is a PC based two door controller compatible with EntraPass Security Software packages. Now with new European enclosure. Some of the key features offered by the KT-300EU are: Controls two doors and easily links to a network Update the firmware directly from systems workstation Fast, up to 115,200 baud Ready to go, no dip switches or jumpers to set PSU to provide up to 12V DC per door lock 5V and 12V reader power support Interfaces with an external alarm system Supervises battery conditions and reports low battery/no battery status to the system Automatic trouble reporting All power outputs are individually protected against short circuits and surges by a self-resetting PTC Choice of two memory capacities, 128K or 512K KT-100 The KT-100 Mini Door Controller is compact and versatile with a space-saving design that incorporates all the components and equipment found in much larger controllers. Single door controller Flash memory programming Fast communication speed, up to 115,200 baud Automated trouble reporting Interfaces with an external alarm system Update firmware directly from the workstation No dip switches or jumpers to set decreases installation time E-SPE-EN EntraPass special edition E-COR-EN License for EntraPass Corporate Software including 2 additional workstation licenses, elevator control, badging, remote site management and SmartLink. Also includes English reference manual and CBLK-10 cable kit E-GLO-WS1-V License for 1 additional workstation option E-GLO-WS8-V License for 8 additional workstations option E-GLO-COM-V License for 16 additional Global gateways (DOS NCC) E-GLO-COM-V3WIN License for 16 additional Global gateways (Windows NCC) E-GLO-CORCOM-V License for 40 additional Corporate gateways E-GLO-RDN-V Redundancy server option for EntraPass Global edition E-GLO-SQL-V License for Oracle/MS-SQL HR interface option E-GLO-VVM-V License for EntraPass Video Vault PROTOCOL CONVERTERS VC Multi-function communication interface RS232 to RS485 to daisy chain the KT-XXX controllers USB The USB-485 Communication Interface is a protocol converter used to connect a PC's USB port to the RS-485 input on your Kantech controller KT-100 / KT-300. The maximum bus length is 1.2 km TRM Lantronix UDS DS, one port device server, RS232/485, 10 base TRM Lantronix UDS DS, one port device server, RS232/485, 100 base: serial interface (RS-232, RS-422, RS-485), 10 Base- T/100 Base-TX Ethernet,diagnostic LEDs, AC power adaptor, CD-ROM with configuration tools and documentation, printed Quick Start guide. Power switch is able 110/220 CONTROLLERS KT-300EU-8K KT-300 controller supplied with European enclosure. 128K PCB to support up to 8,000 card holders. Enclosure supplied with transformer to power KT-300PCB + PSU to provide up to 12V DC for locking per lock output KT-300EU-56K KT-300 controller supplied with European enclosure. 512K PCB to support up to 56,000 card holders. Enclosure supplied with transformer to power KT-300PCB + PSU to provide up to 12V DC for locking per lock output KT3-LCD LCD time & date display for time and attendance for KT-300 TYCO-A-ACCESS European enclosure for KT-300. Enclosure supplied with transformer for KT-300 PCB and power supply for up to 12V DC for each lock output External isolation relay SPDT for KT-300 output RL1/RL2 KT-300TAMP Tamper switch for KT-300CAB and KT-4051CAB metal cabinet KT-PC zone input expansion module KT-PC relay output and COMBUS additional power supply KT-PC output expansion module KT Mini door controller 2 readers, 1 door for flush mount, requires 12V DC power supply (without surface mount box) MUSB-1WHT Surface mounting box to use with the KT-100 mini door controller (colour: white)

4 EntraPass Security Software 339 EntraPass Special Edition The EntraPass Special Edition single-workstation software package accommodates an unlimited number of cardholders from one workstation and controls up to 128 doors. Network ready Easy to use, easy to install Quicker installations Integrates easily with external alarm systems Operator friendly EntraPass Corporate Edition EntraPass Corporate Edition provides expanded functionality with the ability to control thousands of doors from up to 20 workstations. This proven platform gives you the ultimate balance between power and affordability in a network environment. Visual diagnostics Integrated badging SmarkLink feature Enhanced video integration EntraPass Video Vault option EntraPass Global Edition EntraPass Global Edition is the most powerful software package Kantech has to offer. With features like global anti-passback and area management, this system provides solutions for the most demanding applications. It will adapt easily to your needs, allowing users to access remote sites from up to 128 workstations. Network ready High performance Visual diagnostics SmarkLink feature Enhanced video integration EntraPass Video Vault option

5 340 Part No IOPASS STAND-ALONE SYSTEM SA-500-EN IOPass controller with integrated reader SA-600-EN IOPass controller with external reader SA-RM Additional relay module for the IoPass IOPASS The IoPass is a very simple stand-alone Access Control system suitable for a wide range of security applications. Some of the key features of the IoPass include: Up to 5,000 card holders Use reader, keypad or both Integrated or external IoProx proximity reader Easy programming from the keypad LCD display for ease of use Higher security provided by a concealed door relay module Auxiliary relay to arm/disarm an alarm system Audit trail on the unit Duress function available 10 Proximity tags included No need for site code Any IoProx device can be enrolled Runs from 12V DC 3Amp relay rating for lock output Up 150m run from reader to controller, CAT5 or alarm cable unshielded T-REX EXIT DETECTOR T.REX-LT T-REX exit detector with tamper and timer, white T.REX-XL T-REX exit detector with tamper, piezo and timer, white T.REX-LT T-REX exit detector with tamper, timer and 2-relays, white T.REXXL T-REX exit detector with tamper, piezo, timer and 2-relays, white T.REX-XLBLK T-REX exit detector with tamper, piezo and timer, black T.REX-XL2BLK T-REX exit detector with tamper, piezo, timer and 2-relays, black T-REX Why use T-Rex for Access Control applications? Hands free exit, no buttons User friendly to compliment Proximity technology Local built in sounder for higher security Accurate beam targeting coupled with digital signal processing leaves it unchallenged for accuracy It can be used with any Access Control system T-REX APPLICATIONS RANGE OF APPLICATIONS The T-Rex exit detectors can be used for a wide range of applications. Especially suited to high traffic applications such as hospitals, offices and factories. The T-Rex can also be used in conjunction with CCTV where movement detection can trigger a relay to activate recording.

6 IOPASS OPTIONS THE IOPASS IS AVAILABLE IN TWO VERSIONS SA-500 integrated reader controller SA-600 separate reader and controller SA-600 is suitable for external use. Both versions are supplied with 10 IoProx proximity keytags and an external relay module as standard. 341 EXTERNAL SA-600 PROXIMITY READER Controller with separate reader Tamper switch N.C. Function selection jumpers: Latch, fast/slow detection, LED disable. Integrated 90dB piezo for door alarm. Controlled by remote panel or through on-board relay (5-28VDC). Infrared sensor encased in an insulation chamber. The signal is subsequently audited by the on-board computer and filtered using digital signal processing technology (DSP) with automatic environmental compensation. Lock control relay Main relay Lock control relay and main relay terminals Main relay timer jumpers 16-step digital timer from 0.5 to 60 seconds X-Y Targeting using two adjustable louvers to target a specific area of detection such as a door handle or panic bar. Power terminals and tamper output On-board computer T.REX-XL2 model shown