Lutron elumen Zone/Area Machine

Transcription

1 Doc.. Ver: DESCRIPTION The Lutron Machine driver allows the FieldServer to transfer data to and from devices over RS-232 using Lutron elumen protocol. The FieldServer can emulate either a Server or Client, although the Lutron Machine driver is only available in Client configuration. Server drivers are for FieldServer testing purposes only. Max des Supported FieldServer Mode des Comments Client 1 Only one Lutron Machine driver Client node is able to be connected to a Lutron elumen panel. Server 1 One BACNet IP node provides an interface to the Lutron elumen panel. The Lutron Grafik Machine Zone/Area Machine driver, hereafter simply referred to as the Lutron Machine driver, provides a BACNet IP interface to a Lutron elumen panel. The driver can be configured to represent zones or areas as used in the Lutron elumen panel. The FieldServer acts as both Client and Server to provide BACNet objects to an external BACNet Client. In Server mode, the FieldServer collects data from the elumen panel and holds the data ready for reads from an external BACNet Client. In Client mode, the FieldServer executes pre-defined commands on the elumen panel, for example, running scripts. 2 FORMAL DRIVER TYPE Serial Client Only 3 COMPATIBILITY MATRIX FieldServer Model FS-x2010 FS-x2011 FSx25 FS-x30 FS-x40 SlotServer Protode QuickServer FS-QS-1010 QuickServer FS-QS-1011 ProtoCessor FPC-FO2 ProtoCessor FPC-FD2 Compatible with this driver Page 1 of 5

2 Doc.. Ver: CONNECTION INFORMATION Connection type: RS-232, RS-485 Baud Rates: 9600 Data Bits: 8 Stop Bits: 1 Parity: ne Multidrop Capability 5 DEVICES TESTED Device Lutron Grafik 6000 Tested (FACTORY, SITE) Site Page 2 of 5

3 Doc.. Ver: CONNECTION CONFIGURATIONS The FieldServer is connected to the Lutron elumen panel as shown in the connection drawing below: Configure the elumen panel according to manufacturer s instructions. FS CAT 5 CABLE FS FS LUTRON SERIAL RS-232 INTERFACE PART # FieldServer P1 Page 3 of 5

4 Doc.. Ver: V 15A Dedicated Control Feed Wallstation link To control stations Aux Link (RS-485) elumen Processor User Interface link Dimmer panel link To dimmer panels Inter-processor link 8 1 FieldServer P1 6.1 Pinouts Function From To Color RX RJ45-01 DB9F-02 Red CTS DB9M-08 White GND RJ45-04 DB9F-05 Black RTS DB9F-07 Brown TX RJ45-08 DB9M-03 Green Page 4 of 5

5 Doc.. Ver: COMMUNICATIONS FUNCTIONS - SUPPORTED FUNCTIONS AT A GLANCE: 7.1 Data Types Supported FieldServer Data Type Analog Input Binary Input Analog Output Binary Output Multistate Output Analog Value Binary Value Description (or Device Data Type) Zone Intensity, Last Scene number Relay status, Scene on status Desired Intensity, Desired Scene, Scripts Scripts Scripts System variables System variables 7.2 Read and Write operations supported FieldServer as a Client Read Analog Input Status: Read Binary Input Status: Read Analog Value Status: Read Binary Value Status: Write Analog Setpoints: Select Scene in Area, Run Script Write Binary Commands: Run Script FieldServer as a Server Provide Analog Input Status: Provide Binary Input Status: Provide Analog Value Status: Provide Binary Value Status: Accept Analog Setpoints: Select Scene in Area, Run Script Accept Binary Commands: Run Script 7.3 Unsupported Functions and Data Types Function Programming messages Reason FieldServer is a data transfer device, and as such, programming messages are not required Page 5 of 5