PIPEPHASE. Wendy Lam Principal QA Engineer SimSci by Schneider Electric
|
|
- Arlene Haynes
- 6 years ago
- Views:
Transcription
1 PIPEPHASE Wendy Lam Principal QA Engineer SimSci by Schneider Electric
2 What is PIPEHASE? PIPEPHASE software is a simulation program which predicts steadystate pressure, temperature, and liquid holdup profiles in wells, flowlines, gathering systems, and other linear or network configurations of pipes, wells, pumps, compressors, separators, and other facilities. The fluid types that PIPEPHASE software can handle include liquid, gas, steam, and multiphase mixtures of gas and liquid. Several special capabilities have also been designed into PIPEPHASE software including well analysis with inflow performance; gas lift analysis; pipeline sphering; and sensitivity (nodal) analysis. These additions extend the range of the PIPEPHASE application so that the full range of pipeline and piping network problems can be solved.
3 User Experience Improvements PIPEPHASE 9.7 Updates to Simulation Wizard Right Mouse Click Options UOM Conversion Ability to add pictures to PFD Capability to cut/copy/paste multiple devices RAS Improvements Improved identification of conditions for tabular PVT data ability to add names Improved workflow for tuning PVT data with the standing correlation Improved GUI access to PRO/II thermo methods Excel report improvements user defined link reports PIPEPHASE 9.8 Improved wellbore data input Excel entry for pipeline profile Case study improvements Olga-S options available in GUI Multiple global defaults Fitting data entry enhancements GUI access to petro component data Node summary improvements PDAMP & QDAMP UOM reporting & conversion Version added to title bar
4 UOM Conversion Easily convert units of measurement for groups of data in PIPEPHASE 9.7 > When making the change, you will be prompted with Units of measure have changed, would you like to convert all data? Select Yes or No. Yes will convert all UOM in the model No will change but not convert all UOM in model (same as previous versions of PIPEPHASE)
5 Right Mouse Click Options Right mouse click to allow > Editing of input data > View network results > Access to special analysis Nodal analysis Line sizing
6 Cut/Copy/Paste of Multiple Devices Capability to select multiple units within link dialog and either cut or copy, then paste Select & Copy/Cut Paste units
7 PVT Improvements Adjust Standing Data option is now called Tune PVT with Standing ; it forces the PVT correlations for Blackoil model to the Standing Method Identification of conditions for tabular PVT data to be more intuitive by adding actual T/P values
8 User Defined Link Reports Improve output generation by configuring custom link reports > Choose View Output/Generate Excel Report, or > Right-click on a link to access and generate Excel Reports on Run
9 Improved Wellbore Data Input Tabular profile data entry Define well definition in one of three ways: > MWD & TVD, calculating inclination angle > MWD & inclination angle calculating TVD > TVD & inclination angle calculating MWD Options include: > Adjust for reference depth > Include temperature profile > Profile plot > Microsoft Excel edit
10 Excel Pipeline Profile Capability to provide pipeline profile data in Excel
11 Case Study Set-up Upgrade To set-up of case study now enter starting value, increment and number of cases One dialog to enter a 10 step case study not 10!
12 Multiple Global Defaults Capability to define databases of global devices > Pipe, tubing annulus, compressor, multi-stage compressor, DPDT, ESP & pump
13 Device Data Entry Upgrade Option to Use Previous Device Diameter > By default unchecked > When checked a device when dropped will take diameter of previous device dropped
14 GUI Access to Petro Component Data Access more petro component data in the graphical user interface, including: > Critical pressure, temperature, volume & compressibility > Acentric factor Any user modifications to calculated data are flagged
15 Node Summary Improvements Use improved node reporting of volumetric rates > Node summary in text report, can be reported at standard, actual or both conditions > Microsoft Excel report default is to report at both standard & actual flow conditions
16 Node Summary Improvements View output options to toggle between standard and actual conditions Check to display junction rates > If selected, it will display junction outlet flows, summed for multiple exit links > Default display option is no junction flow
17 Updates PIPEPHASE 9.7 Nodal Analysis upgrade API 14E erosional velocity method implementation Upgrade of fitting devices to allow Cv specification Phase envelope updates Import component & thermodynamic data from PRO/II keyword files Major equipment disable Multiple pump curves PIPEPHASE 9.8 TDM integration Bahadori temperature drop model for control devices Updates to pipe schedule database NACE corrosion risk Ability to select PVT set at junction Added devices for STEAM fluid model Kartoatmodjo heavy oil correlation for blackoil CMG Stars, GEM & Olga-S upgrades Ability to specify different inversion points for different PVT sets
18 Nodal Analysis Upgrade Define Nodal Analysis quicker and more easily using v9.7 updates: > Use API to change data which allows access to more variables > Allow a greater number of parameter changes (20), flow rates and values to be specified > Grid views improvements and automatic selection of inflow and outflow parameters based on the solution node > Excel reports > Case study > Detailed Pressure and Temperature reports allow you to validate link calculations and parameter changes are operating as intended > Right click menu allows you to edit data or view network results regardless of the PFD view mode; perform special analysis, such as, edit data, run simulation, view results and generate Excel reports for nodal analysis
19 Nodal Analysis Upgrade Nodal Analysis can be accessed via the right click menu Input data Run analysis View pressure vs flow plot View temperature vs flow plot View report Include Case Study Excel Reports on Run Use Calculated Pressure
20 Access to PRO/II Components Standardize component data options between PRO/II and PIPEPHASE > Most important PRO/II component data options are available in v9.7 > Assay methods align with PRO/II
21 Access to PRO/II Components > Import component and thermodynamic data from PRO/II keyword files when creating a new simulation
22 API14E Erosional Velocity More accurately model the effect of entrained solids on erosion using the API14E erosional velocity correlation V e = erosional velocity limit, m/s S = geometric dependent constant W = sand flow rate in kg/day ρ m = fluid mixture density in kg/m 3 = (ρ l V l + ρ g V g )/V m D = pipe internal diameter in mm
23 Major Equipment Disable Capability to disable equipment in GUI > Ability to disable equipment via API or from the SIM4ME Portal > In keyword file, disabled equipment will be flagged OFF > Devices include: pump, ESP pump, compressor, multi-stage compressor, heater, cooler, DPDT, & IPR
24 TDM Integration PIPEPHASE now integrated to TDM > Access user to launch TDM from PIPEPHASE > Access registered databanks (including user databanks) in PIPEPHASE > Select Databank Hierarchy within component dialog box
25 Bahadori Temperature Drop Method Apply Bahadori-Vuthalaru temperature drop option available for control devices (choke, regulator) with non-compositional models Globally Local device
26 Pipe Schedule Database Updates Pipe schedule database updated with pipe data that includes nominal diameter, ID, OD, and wall thickness
27 NACE Corrosion With NACE corrosion (NACE SP No ) for normally dry natural gas (DG-ICDA), PIPEPHASE: Performs multiphase flow calculations to determine the critical inclination angle of liquid holdup in the direction of flow Produces a pipeline inclination profile Identifies pipes where the actual inclination angle is greater than the critical inclination angle of liquid holdup Applies only to surface piping; not applicable to wells
28 Blackoil PVT Set Selection Select the blackoil property set to be used at a junction
29 Miscellaneous More devices supported by STEAM fluid model Heater, cooler, separator & injector Olga-S upgrade Olga-S from to both 2 and 3 phase Updates to CMG Stars and GEM interfaces Ability to specify different inversion points for different PVT sets Kartoatmodjo heavy oil correlation available for blackoil GOR, Oil FVF, and oil viscosity
30 Infrastructure PIPEPHASE 9.7 Flexera licensing Microsoft Windows 8 support Microsoft Office 2013 support SIM4ME Portal 2.3 upgrade PRO/II 9.2 thermo upgrade Compiler upgrade PIPEPHASE 9.8 XVT GUI Toolkit Upgrade PRO/II 9.3 thermo upgrade SIM4ME Portal 2.4 upgrade
31 Supporting SIM4ME Upgrade to SIM4ME Portal 2.4 Continues the bug fixes theme. Reported crashes fixed!!!!
32
Pipeline Corrosion Power Tool. Quick Step Guide
Pipeline Corrosion Power Tool Quick Step Guide Contents Logging In to SkyBox Tools Fluid Definition New Fluid Case New Pipe Definition New Pipe Case New Network Definition How to Create Link Elements New
More informationObject Oriented Simulation of Multiphase Flow
Object Oriented Simulation of Multiphase Flow P.Klebert and O.J.Nydal Norwegian University of Science and Technology (NTNU) 7491 Trondheim Norway Abstract Pipelines in offshore oil and gas production systems
More informationB03 Guided Interpretation #3
Emeraude v2.60 Doc v2.60.01 - KAPPA 1988-2010 Guided Interpretation #3 B03-1/11 B03 Guided Interpretation #3 This session assumes that you have followed the first two guided sessions, or that you are familiar
More informationRubis (NUM) Tutorial #1
Rubis (NUM) Tutorial #1 1. Introduction This example is an introduction to the basic features of Rubis. The exercise is by no means intended to reproduce a realistic scenario. It is assumed that the user
More informationTutorial 2. Modeling Periodic Flow and Heat Transfer
Tutorial 2. Modeling Periodic Flow and Heat Transfer Introduction: Many industrial applications, such as steam generation in a boiler or air cooling in the coil of an air conditioner, can be modeled as
More informationSPE Global Component Lumping for EOS Calculations
SPE 170912 Global Component Lumping for EOS Calculations S. Ahmad Alavian Curtis Hays Whitson Sissel O. Martinsen PERA a/s Petroleum Engineering Reservoir Analysts Slide 2 Component Lumping Pseudoization
More informationAppendix Introduction
Appendix Introduction This section describes features of the OLI Studio. The chapter starts with an overview of the OLI Studio Interface, including some calculation objects discussed previously. A.1 Creating
More informationThe Standard Module - Ventilation Systems
Chapter 3 The Standard Module - Ventilation Systems 3.1 Introduction The PIPENET Vision Standard module is a tool for steady state flow modelling of networks of pipes and ducts. It can model incompressible
More informationesmermpfm TECHNOLOGY OVERVIEW ELECTRO-MECHANICAL SYSTEM esmermpfm 1 ESMER MPFM Schematic
Multiphase Flow Meters For the Oil and Gas Industry esmermpfm TECHNOLOGY OVERVIEW ESMER MPFMs measure the flow rates of individual phases in oil, condensate and wet gas production lines without the need
More informationSMART WELL MODELLING. Design, Scenarios and Optimisation
Page 1 Introduction Smart or complex wells are in increasing use by operators as reservoir environments become more challenging. The wells include a number of smart devices installed to achieve a variety
More informationMOLLIER DIAGRAM CAN BE IMPROVED!
MOLLIER DIAGRAM CAN BE IMPROVED! IMPROVED BASIC COOLING CIRCUIT PERFORMANCE EFFICIENCY USING AN ECONOMISER Eng. Jonny Malachi, VP Operations, Mashav Refrigeration and Air Conditioning Engineering Ltd.
More informationtnavigator 17.3 Rock Flow Dynamics September 2017г.
tnavigator 17.3 Rock Flow Dynamics September 2017г. Modules of tnavigator Designers Geology Designer Model Designer Network Designer PVT Designer (included in Geology, Model and Network Designer) VFP Designer
More informationFirst Steps - Ball Valve Design
COSMOSFloWorks 2004 Tutorial 1 First Steps - Ball Valve Design This First Steps tutorial covers the flow of water through a ball valve assembly before and after some design changes. The objective is to
More informationVERSION RELEASE NOTES... 2 VERSION RELEASE NOTES... 3 VERSION RELEASE NOTES... 5
Contents VERSION 6.3.3.4657 RELEASE NOTES... 2... 2... 2... 2 CC-BATCH... 2 VERSION 6.3.2.4389 RELEASE NOTES... 3... 3... 3... 3 CC-DYNAMICS... 4 CC-BATCH... 4 VERSION 6.3.1.4112 RELEASE NOTES... 5...
More informationOLI Chemistry Wizard 9.5 User Guide
OLI Chemistry Wizard 9.5 User Guide Updated August 17, 2017 OLI Chemistry Wizard is a Windows wizard-style application that leads you through the process of creating an OLI chemistry model file and associated
More informationCFD Simulation for Stratified Oil-Water Two-Phase Flow in a Horizontal Pipe
CFD Simulation for Stratified Oil-Water Two-Phase Flow in a Horizontal Pipe Adib Zulhilmi Mohd Alias, a, Jaswar Koto, a,b,* and Yasser Mohamed Ahmed, a a) Department of Aeronautics, Automotive and Ocean
More informationANSYS AIM Tutorial Flow over an Ahmed Body
Author(s): Sebastian Vecchi Created using ANSYS AIM 18.1 ANSYS AIM Tutorial Flow over an Ahmed Body Problem Specification Start Up Geometry Import Geometry Enclose Suppress Mesh Set Mesh Controls Generate
More informationBETTER from TECHNOLOGIES.
Integrated static and BRIDGING dynamic THE modeling GAP TO BETTER from TECHNOLOGIES. reservoir to surface network Simple facts on Rock Flow Dynamics and tnavigator Rock Flow Dynamics is offering high performance
More informationSeisTool Seismic - Rock Physics Tool
SeisTool Seismic - Rock Physics Tool info@traceseis.com Supports Exploration and Development Geoscientists in identifying or characterizing reservoir properties from seismic data. Reduces chance of user
More informationVisualFlonet. User Guide
VisualFlonet User Guide VisualFlonet User Guide NOTICE The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility
More informationTen Years of Field Experience with Flashing Two-Phase LNG Expanders GASEX 2012
Ten Years of Field Experience with Flashing Two-Phase LNG Expanders Hans E. Kimmel Research & Development Ebara International Corporation Sparks, Nevada, USA hkimmel@ebaraintl.com GASEX 2012 Conference
More informationTutorial 17. Using the Mixture and Eulerian Multiphase Models
Tutorial 17. Using the Mixture and Eulerian Multiphase Models Introduction: This tutorial examines the flow of water and air in a tee junction. First you will solve the problem using the less computationally-intensive
More informationCOMPUTATIONAL FLUID DYNAMICS ANALYSIS OF ORIFICE PLATE METERING SITUATIONS UNDER ABNORMAL CONFIGURATIONS
COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF ORIFICE PLATE METERING SITUATIONS UNDER ABNORMAL CONFIGURATIONS Dr W. Malalasekera Version 3.0 August 2013 1 COMPUTATIONAL FLUID DYNAMICS ANALYSIS OF ORIFICE PLATE
More informationANSYS AIM Tutorial Fluid Flow Through a Transition Duct
ANSYS AIM Tutorial Fluid Flow Through a Transition Duct Author(s): Sebastian Vecchi, ANSYS Created using ANSYS AIM 18.1 Problem Specification Start Up Geometry Import Geometry Extracting Volume Suppress
More informationStratified Oil-Water Two-Phases Flow of Subsea Pipeline
Stratified Oil-Water Two-Phases Flow of Subsea Pipeline Adib Zulhilmi Mohd Alias, a, Jaswar Koto, a,b,*, Yasser Mohamed Ahmed, a and Abd Khair Junaidi, b a) Department of Aeronautics, Automotive and Ocean
More informationtnavigator 17.2 Rock Flow Dynamics June 2017г.
tnavigator 17.2 Rock Flow Dynamics June 2017г. Modules of tnavigator Designers Geology Designer Model Designer Network Designer Simulation Black Oil Compositional model Analyze results Graphical User Interface
More informationNon-Newtonian Transitional Flow in an Eccentric Annulus
Tutorial 8. Non-Newtonian Transitional Flow in an Eccentric Annulus Introduction The purpose of this tutorial is to illustrate the setup and solution of a 3D, turbulent flow of a non-newtonian fluid. Turbulent
More informationONE DIMENSIONAL (1D) SIMULATION TOOL: GT-POWER
CHAPTER 4 ONE DIMENSIONAL (1D) SIMULATION TOOL: GT-POWER 4.1 INTRODUCTION Combustion analysis and optimization of any reciprocating internal combustion engines is too complex and intricate activity. It
More informationUsing a Single Rotating Reference Frame
Tutorial 9. Using a Single Rotating Reference Frame Introduction This tutorial considers the flow within a 2D, axisymmetric, co-rotating disk cavity system. Understanding the behavior of such flows is
More informationANSYS AIM Tutorial Turbulent Flow Over a Backward Facing Step
ANSYS AIM Tutorial Turbulent Flow Over a Backward Facing Step Author(s): Sebastian Vecchi, ANSYS Created using ANSYS AIM 18.1 Problem Specification Pre-Analysis & Start Up Governing Equation Start-Up Geometry
More informationSolved with COMSOL Multiphysics 4.2
Peristaltic Pump Solved with COMSOL Multiphysics 4.2 Introduction In a peristaltic pump, rotating rollers squeeze a flexible tube. As the pushed-down rollers move along the tube, fluids in the tube follow
More informationGASWorkS Product Description
GASWorkS v10 Description: 1 GASWorkS Product Description GASWorkS has continued to evolve since our first quite simple but effective version of the software was released in 1991. Our latest release sports
More informationEmeraude v2.60 White Pages
Emeraude v2.60 White Pages 1. Introduction Emeraude 2.60 contains major changes, as well as a series of smaller additions which together, play an important part in further enhancing the interaction with
More informationSpeed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester
Speed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Content ANSYS CFD Introduction ANSYS, the company Simulation
More informationB09 Guided Interpretation #9
Emeraude v2.60 Doc v2.60 - KAPPA 1988-2010 Guided Interpretation #9 B09-1/22 B09 Guided Interpretation #9 This session illustrates the workflow offered by Emeraude for Multiple Probes Tools (MPT) around
More informationCross Sections, Profiles, and Rating Curves. Viewing Results From The River System Schematic. Viewing Data Contained in an HEC-DSS File
C H A P T E R 9 Viewing Results After the model has finished the steady or unsteady flow computations the user can begin to view the output. Output is available in a graphical and tabular format. The current
More informationApplication Manual. Shark. Software for the simulation of refrigeration equipment and air conditioners
Page 1 of 184 Software for the simulation of refrigeration equipment and air conditioners Index Software for the simulation of refrigeration equipment and air conditioners... 1 : application description
More informationANSYS AIM Tutorial Steady Flow Past a Cylinder
ANSYS AIM Tutorial Steady Flow Past a Cylinder Author(s): Sebastian Vecchi, ANSYS Created using ANSYS AIM 18.1 Problem Specification Pre-Analysis & Start Up Solution Domain Boundary Conditions Start-Up
More informationCalculate a solution using the pressure-based coupled solver.
Tutorial 19. Modeling Cavitation Introduction This tutorial examines the pressure-driven cavitating flow of water through a sharpedged orifice. This is a typical configuration in fuel injectors, and brings
More informationSolved with COMSOL Multiphysics 4.2
Backstep Introduction This tutorial model solves the incompressible Navier-Stokes equations in a backstep geometry. A characteristic feature of fluid flow in geometries of this kind is the recirculation
More informationOptimize Pipeline Flow and Uptime with Pipe Flow Hydraulic Analysis in Aspen HYSYS
Optimize Pipeline Flow and Uptime with Pipe Flow Hydraulic Analysis in Aspen HYSYS Anum Qassam, Product Management & Jennifer Dyment, Product Marketing March 20 th, 2018 Today s Presenters Anum Qassam
More informationStrömningslära Fluid Dynamics. Computer laboratories using COMSOL v4.4
UMEÅ UNIVERSITY Department of Physics Claude Dion Olexii Iukhymenko May 15, 2015 Strömningslära Fluid Dynamics (5FY144) Computer laboratories using COMSOL v4.4!! Report requirements Computer labs must
More informationProject #3 MAE 598 Applied CFD
Project #3 MAE 598 Applied CFD 16 November 2017 H.P. Huang 1 Task 1 (a) Task 1a was to perform a transient analysis of a 2-D chamber that is initially filled with air, and has water flowing through the
More informationPipeline engineer competency standards list: onshore sector
Pipeline engineer competency standards list: onshore sector ID Competency area/competency Gen Des Cons Ops Level General engineering GE001 Engineering degree in a relevant discipline x Core GE002 Pipeline
More informationANSYS AIM Tutorial Compressible Flow in a Nozzle
ANSYS AIM Tutorial Compressible Flow in a Nozzle Author(s): Sebastian Vecchi Created using ANSYS AIM 18.1 Problem Specification Pre-Analysis & Start Up Pre-Analysis Start-Up Geometry Import Geometry Mesh
More informationCFD modelling of thickened tailings Final project report
26.11.2018 RESEM Remote sensing supporting surveillance and operation of mines CFD modelling of thickened tailings Final project report Lic.Sc.(Tech.) Reeta Tolonen and Docent Esa Muurinen University of
More informationFigure 2: Water Into Kerosene, Volume Fraction (Left) And Total Density Of Mixture (Right)
Jared Bottlinger MAE598 Project 3 11/16/17 Task 1 a) Figure 1: Volume Fraction Of Water At 0.4s Task 1 b) Figure 2: Water Into Kerosene, Volume Fraction (Left) And Total Density Of Mixture (Right) Task
More informationHighly Successful Reservoir Surveillance and Production Enhancement in a North Sea Brown Field Asset
Highly Successful Reservoir Surveillance and Production Enhancement in a North Sea Brown Field Asset Thistle Field Summary Thistle Field Northern North Sea oil field. Brent Group reservoir. First production
More informationVisualPiper. User Guide
VisualPiper User Guide VisualPiper User Guide NOTICE The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility
More informationHeat Exchanger Efficiency
6 Heat Exchanger Efficiency Flow Simulation can be used to study the fluid flow and heat transfer for a wide variety of engineering equipment. In this example we use Flow Simulation to determine the efficiency
More informationComparison of Classic and Finned Piston Reciprocating Linear Air Compressor Using COMSOL Multiphysics
Comparison of Classic and Finned Piston Reciprocating Linear Air Compressor Using COMSOL Multiphysics M. Heidari*, P. Barrade, and A. Rufer LEI, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
More informationOptis Electric Line HD
Optis Electric Line HD Optis Electric Line HD is a step change in downhole video technology providing colour, 25 frames per second video, on mono-conductor cables. Colour images provide a new level of
More informationVariable Area Flowmeters Installation Instructions G Series and M Series
Variable Area Flowmeters Installation Instructions G Series and M Series Safety Definitions Potential danger to life or of serious injuries. Potential for personal injury from electrical shock. Safety
More informationWinPump. IMO AB Pump Selection Program Manual from version General. 1 User interface Pump selection _ 3
WinPump IMO AB Pump Selection Program Manual from version 3.7.11 1 User interface 2 2.0 Pump selection _ 3 2.1 By operating data 3 2.2 By text entry 3 2.3 By designation search 4 2.4 By Pump family 4 3
More informationOperating Instructions
Operating Instructions Measurement of Liquid Viscosity The viscosity is measured using the Brookfield Viscometer (see Figure 1a) (a) (b) Figure 1. (a) Top view of the Brookfield Viscometer. The viscosity
More informationInfluence of Relevant Fluid Parameters on Pressure Pulsation of a Variable Lubricant Vane Pump
Influence of Relevant Fluid Parameters on Pressure Pulsation of a Variable Lubricant Vane Pump Thomas Fischer, development/calculation Jan Fischer, development/testing Nico Jäkel, development/construction
More informationµ = Pa s m 3 The Reynolds number based on hydraulic diameter, D h = 2W h/(w + h) = 3.2 mm for the main inlet duct is = 359
Laminar Mixer Tutorial for STAR-CCM+ ME 448/548 March 30, 2014 Gerald Recktenwald gerry@pdx.edu 1 Overview Imagine that you are part of a team developing a medical diagnostic device. The device has a millimeter
More informationand to the following students who assisted in the creation of the Fluid Dynamics tutorials:
Fluid Dynamics CAx Tutorial: Channel Flow Basic Tutorial # 4 Deryl O. Snyder C. Greg Jensen Brigham Young University Provo, UT 84602 Special thanks to: PACE, Fluent, UGS Solutions, Altair Engineering;
More informationCOMPUTATIONAL FLUID DYNAMICS USED IN THE DESIGN OF WATERBLAST TOOLING
2015 WJTA-IMCA Conference and Expo November 2-4 New Orleans, Louisiana Paper COMPUTATIONAL FLUID DYNAMICS USED IN THE DESIGN OF WATERBLAST TOOLING J. Schneider StoneAge, Inc. Durango, Colorado, U.S.A.
More informationUsing the Eulerian Multiphase Model for Granular Flow
Tutorial 21. Using the Eulerian Multiphase Model for Granular Flow Introduction Mixing tanks are used to maintain solid particles or droplets of heavy fluids in suspension. Mixing may be required to enhance
More informationModeling Evaporating Liquid Spray
Tutorial 16. Modeling Evaporating Liquid Spray Introduction In this tutorial, FLUENT s air-blast atomizer model is used to predict the behavior of an evaporating methanol spray. Initially, the air flow
More informationHydrocyclones and CFD
Design of Hydrocyclone Separation Equipment Using CFD Coupled with Optimization Tools David Schowalter 1, Rafiqul Khan 1, Therese Polito 2, and Tim Olson 3. (1) Fluent Inc., 10 Cavendish Court, Lebanon,
More informationKEY STAR TECHNOLOGIES: DISPERSED MULTIPHASE FLOW AND LIQUID FILM MODELLING DAVID GOSMAN EXEC VP TECHNOLOGY, CD-adapco
KEY STAR TECHNOLOGIES: DISPERSED MULTIPHASE FLOW AND LIQUID FILM MODELLING DAVID GOSMAN EXEC VP TECHNOLOGY, CD-adapco INTRODUCTION KEY METHODOLOGIES AVAILABLE IN STAR-CCM+ AND STAR-CD 1. Lagrangian modelling
More informationVisualAdrian. User Guide
VisualAdrian User Guide VisualAdrian User Guide NOTICE The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility
More informationMultiphase Interactions: Which, When, Why, How? Ravindra Aglave, Ph.D Director, Chemical Process Industry
Multiphase Interactions: Which, When, Why, How? Ravindra Aglave, Ph.D Director, Chemical Process Industry Outline Classification of Multiphase Flows Examples: Free Surface Flow using Volume of Fluid Examples:
More informationI. INTRODUCTION. Figure XIII-1. Eroded Sand Screen
XIII-1 I. INTRODUCTION Introduction The effect of particle size on erosion has been investigated by researchers, but in most cases, erosion from relatively small particles has not been considered nearly
More informationTutorial 1: Standard usage
Introduction This tutorial details the following steps: importing an existing data set, editing the data, saving the project, running and monitoring simulation, viewing results vectors, and creating reports.
More informationCOPYRIGHTED MATERIAL INTRODUCTION TO ASPEN PLUS CHAPTER ONE
CHAPTER ONE INTRODUCTION TO ASPEN PLUS Aspen Plus is based on techniques for solving flowsheets that were employed by chemical engineers many years ago. Computer programs were just beginning to be used,
More informationAPPLIED COMPUTATIONAL FLUID DYNAMICS-PROJECT-3
APPLIED COMPUTATIONAL FLUID DYNAMICS-PROJECT-3 BY SAI CHAITANYA MANGAVELLI Common Setup Data: 1) Mesh Proximity and Curvature with Refinement of 2. 2) Double Precision and second order for methods in Solver.
More informationRosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
More informationDesign and Optimization of Plants and Components for the Production of Polyurethane Foams using STAR-CCM+
Design and Optimization of Plants and Components for the Production of Polyurethane Foams using STAR-CCM+ Dr. Carsten Brodbeck, Bettina Landvogt Martin Schamberg Fraunhofer SCAI Hennecke Polyurethane Technology
More informationTRACE Plug-in Users Manual
TRACE Plugin Users Manual Symbolic Nuclear Analysis Package (SNAP) Version 3.2.5 October 25 2012 Applied Programming Technology, Inc. 240 Market St., Suite 208 Bloomsburg PA 178151951 TRACE Plugin Users
More informationStorm Drain Modeling HY-12 Pump Station
v. 10.1 WMS 10.1 Tutorial Storm Drain Modeling HY-12 Pump Station Analysis Setup a simple HY-12 pump station storm drain model in the WMS interface with pump and pipe information Objectives Using the HY-12
More informationWall thickness= Inlet: Prescribed mass flux. All lengths in meters kg/m, E Pa, 0.3,
Problem description Problem 30: Analysis of fluid-structure interaction within a pipe constriction It is desired to analyze the flow and structural response within the following pipe constriction: 1 1
More informationFirst Steps - Conjugate Heat Transfer
COSMOSFloWorks 2004 Tutorial 2 First Steps - Conjugate Heat Transfer This First Steps - Conjugate Heat Transfer tutorial covers the basic steps to set up a flow analysis problem including conduction heat
More informationAutomation of Static and Dynamic FEA Analysis of Bottomhole Assemblies
Automation of Static and Dynamic FEA Analysis of Bottomhole Assemblies Nader E. Abedrabbo, Lev Ring & Raju Gandikota 1 Weatherford International 11909 Spencer Road, Houston, TX nader.abedrabbo@weatherford.com
More informationTutorial 1. Introduction to Using FLUENT: Fluid Flow and Heat Transfer in a Mixing Elbow
Tutorial 1. Introduction to Using FLUENT: Fluid Flow and Heat Transfer in a Mixing Elbow Introduction This tutorial illustrates the setup and solution of the two-dimensional turbulent fluid flow and heat
More informationThermal DC-DC Control System TEC Series
Thermal DC-DC Control System TEC 54100 Series Thermal DC-DC Control System TEC 54100 Series Bidirectional driving with 150W (24V 8A), 300W (24V 13A), or 800W (40V 20A) output Filtered PWM output with >
More informationCo-Simulation von Flownex und ANSYS CFX am Beispiel einer Verdrängermaschine
Co-Simulation von Flownex und ANSYS CFX am Beispiel einer Verdrängermaschine Benoit Bosc-Bierne, Dr. Andreas Spille-Kohoff, Farai Hetze CFX Berlin Software GmbH, Berlin Contents Positive displacement compressors
More informationSolved with COMSOL Multiphysics 4.2
Laminar Static Mixer Introduction In static mixers, also called motionless or in-line mixers, a fluid is pumped through a pipe containing stationary blades. This mixing technique is particularly well suited
More informationSize Pressure Safety Valves and Design Flare Systems using Aspen HYSYS and Aspen Flare System Analyzer Webinar Q&A
Size Pressure Safety Valves and Design Flare Systems using Aspen HYSYS and Aspen Flare System Analyzer Webinar Q&A This document summarizes the responses to questions posed before and during the webinar.
More informationIsotropic Porous Media Tutorial
STAR-CCM+ User Guide 3927 Isotropic Porous Media Tutorial This tutorial models flow through the catalyst geometry described in the introductory section. In the porous region, the theoretical pressure drop
More informationPETROPHYSICAL DATA AND OPEN HOLE LOGGING BASICS COPYRIGHT. MWD and LWD Acquisition (Measurement and Logging While Drilling)
LEARNING OBJECTIVES PETROPHYSICAL DATA AND OPEN HOLE LOGGING BASICS MWD and LWD Acquisition By the end of this lesson, you will be able to: Understand the concept of Measurements While Drilling (MWD) and
More informationTutorial: Hydrodynamics of Bubble Column Reactors
Tutorial: Introduction The purpose of this tutorial is to provide guidelines and recommendations for solving a gas-liquid bubble column problem using the multiphase mixture model, including advice on solver
More informationFOUR WHAT S NEW IN THIS VERSION? 4.1 FLOW-3D Usability CHAPTER
CHAPTER FOUR WHAT S NEW IN THIS VERSION? FLOW-3D v11.2.0 continues to streamline engineers simulation workflows by enabling them to more quickly set up simulations, avoid common errors, identify and enter
More informationSolidWorks Flow Simulation 2014
An Introduction to SolidWorks Flow Simulation 2014 John E. Matsson, Ph.D. SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationThe Level Set Method THE LEVEL SET METHOD THE LEVEL SET METHOD 203
The Level Set Method Fluid flow with moving interfaces or boundaries occur in a number of different applications, such as fluid-structure interaction, multiphase flows, and flexible membranes moving in
More informationApplied Reservoir Simulation. Course. Workshop Problems
Applied Reservoir Simulation Course Workshop Problems Reservoir Simulation Application Training Course and (Eclipse) Workshop GeoQuest Training and Development, And NExT Denver and Houston March 06 Applied
More informationCopyright 2017 Petro Class Inc. Advanced Well Testing Tools
Advanced Well Testing Tools About PetroClass FlowTest FlowTest is a Production Testing software tool for testing oil and gas wells in Alberta Canada. FlowTest implements the Alberta Energy and Utilities
More informationTutorial: Riser Simulation Using Dense Discrete Phase Model
Introduction The purpose of this tutorial is to demonstrate the setup of a dense discrete phase model (DDPM) with the example of 2D riser. DDPM is used for the secondary phase that has a particle size
More informationDesign Verification of Hydraulic Performance. for a Centrifugal Pump using. Computational Fluid Dynamics (CFD)
Design Verification of Hydraulic Performance for a Centrifugal Pump using Computational Fluid Dynamics (CFD) Anil S. Akole (Asst. Manager) Center for Design & Research Pentair Water India Private Limited
More informationWMS 10.0 Tutorial Storm Drain Modeling SWMM Modeling Learn how to link a hydrologic model to the SWMM storm drain model
v. 10.0 WMS 10.0 Tutorial Learn how to link a hydrologic model to the SWMM storm drain model Objectives Build a rational method hydrologic model and compute sub-basin flows. Import storm drain network
More informationWebinar: TwinMesh for Reliable CFD Analysis of Rotating Positive Displacement Machines
Webinar: TwinMesh for Reliable CFD Analysis of Rotating Positive Displacement Machines 14.07.2015 Dipl.-Ing. Jan Hesse Jan.hesse@cfx-berlin.de CFX Berlin Software GmbH Karl-Marx-Allee 90 A 10243 Berlin
More informationSolution Recording and Playback: Vortex Shedding
STAR-CCM+ User Guide 6663 Solution Recording and Playback: Vortex Shedding This tutorial demonstrates how to use the solution recording and playback module for capturing the results of transient phenomena.
More informationIntroduction to HYSYS Simulation Heat Transfer Calculations
Introduction to HYSYS Simulation Heat Transfer Calculations Chemical Engineering, Rowan University (Revised 4/18/2001) In this exercise, you will simulate two heat exchangers and calculate the heat transferred
More informationPisces User Guide <Virtual Environment> 5.9
Pisces User Guide 5.9 Page 1 of 58 Contents 1. Introduction...5 1.1. General Description of the Pisces Interface... 6 1.1.1. Common Controls... 6 1.1.2. Main Application Window...
More informationErosion modeling to improve asset life prediction
Erosion modeling to improve asset life prediction Erosion caused by solid particles in process flows impacting on the surfaces of downhole equipment or pipe walls is a common cause of damage and wear in
More informationInc. FLO-CAL Liquid Calibration System FLO-CAL SOFTWARE FLEXIBLE DESIGN TO MEET YOUR LIQUID FLOW CALIBRATION REQUIREMENTS
FLEXIBLE DESIGN TO MEET YOUR LIQUID FLOW CALIBRATION REQUIREMENTS FLO-CAL A portable Liquid Flow Standard FLO-CAL INSTRUMENT Data acquisition and interface tool with flow meter frequency and analog signals.
More informationRHM160. Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications. Features. Applications. Benefits
RHM160 Coriolis Mass Flow Meter for High Flow Terminal and Pipeline Applications Features Standard Pressure ratings up to 50bar (725 psi) Temperature ratings from -196 to 120 C (-320 to 248 F) Mass flow
More informationGeogiga Seismic Pro 8.0 Release Notes
Geogiga Seismic Pro 8.0 Release Notes Copyright 2015, All rights reserved. Table of Contents Introduction...1 Part 1 General Enhancements...3 Trace Display...4 Color Section Display...6 Curve Plotting...8
More information