Variable Displacement Vane Pumps
|
|
|
- Shannon Brenda Walker
- 5 years ago
- Views:
Transcription
1 Variable Displacement Vane Pumps Service Parts Manual VVS0 VVS1 VVS2 VVS3 VVP1 VVP2 VVP3
2 Available Spares Shaft Keys PUMP PART DIMENSIONS NUMBER VVS0-R x6x25 VV*1-R x7x25 VV*2-R, B, PX x8x40 VV*3-R, PX x8x45 VV*3-B x7x35 VV*1-B x7,5 (Woodruff) VVS0-PS /16"x 3 /16"x 5 /8" VV*1-PS /4"x 1 /4"x1" VV*2/3-PF /4"x 1 /4"x1 1 /2" Seal Kits PUMP STANDARD VITON VVS VV* VV* VV* VV*2/3 SAE Included in seal kit. Cover Tightening Torques PUMP TORQUE TORQUE Nm (lbf in) Nm (lbf in) VVS0 4 x M10 84,90 (751) - - VV*1 4 x M12 144,50 (1279) 2 x M8 42,00 (372) VV*2 4 x M14 230,67 (2042) 2 x M12 144,50 (1279) VV*3-RF, PX 6 x M16 354,10 (3134) 2 x M12 144,50 (1279) VV*3-PF, B 4 x M16 354,10 (3134) 2 x M12 144,50 (1279) + 3 x M8 42,00 (372) VVS Compensator Kits FRAME PRESSURE CONTROL SIZE RANGE "C" 0 A C D A C A C A B
3 VVP Compensator Kits ITEM DESCRIPTION VVP1 VVP2 VVP3 1 Standard compensator Multi-function compensator Remote block Relief valve for dual pressure Load sensing compensator Load sensing block Load sensing block with interface Directional valve Directional valve Proportional valve
4 Model Code VVS Series 1 Variable vane pump 2 Frame size 0-6, 10, 12 cm 3 /r 1-16, 20, 25 cm 3 /r 2-32, 40, 50 cm 3 /r 3-63, 80, 100 cm 3 /r 3 Nominal size / geometric displacement, max. pressure 06-6 cm 3 /r cm 3 /r cm 3 /r cm 3 /r cm 3 /r cm 3 /r 32-31,5 cm 3 /r cm 3 /r cm 3 /r cm 3 /r cm 3 /r cm 3 /r 150 bar (2200 psi) 100 bar (1500 psi) 80 bar (1200 psi) Adjust. max. 4 displacement stop S - With stop (Omit if not required.) 5 Mounting flange / port connections Code Mounting flange Port connections R ISO 3019/2 with straight G (BSPF) thread. keyed shaft (size 0 is only (6-25 cm 3 /r pumps) available as a single or secondary pump) RF ISO 3019/2 with straight keyed shaft SAE 4-bolt flange with metric mounting bolts (31,5-100 cm 3 /r pumps) PS ISO 3019/2 with straight keyed shaft (for size 0 pumps only). Size 0 is only available as a single or secondary pump. SAE UNF thread. (6-25cm 3 /r pumps) SAE B 4-bolt with straight keyed shaft (for size 1 pumps only) PF SAE C 2-bolt with straight SAE 4-bolt flange with keyed shaft (only available UNC mounting bolts on a primary or single (31,5-100 cm 3 /r pumps) pump) PX ISO 3019/2 with straight SAE 4-bolt flange with keyed shaft (available UNC mounting bolts only on secondary pump) (31,5-100 cm 3 /r pumps) B Base plate mounting O-ring sealed (available only as ( cm 3 /r pumps) single pump) 6 Rotation viewed from shaft end R - Right hand (clockwise) only 7 Fluid compatibility M - Mineral oil E - Phosphate esters 8 Pump design number 30 - VVS1, 2, VVS0 Subject to change. Installation dimensions remain unaltered for designs *0-*9. 9 Pressure C - Standard pressure compensator 10 Control pressure setting A bar ( psi) B bar ( psi) (sizes cm 3 /r) C bar ( psi) (sizes 6-50 cm 3 /r) D bar ( psi) (sizes 6-12 cm 3 /r) 11 Control adjustment W - Screw with locknut KL - Screw with key lock 12 Control design number 10 - For all models. Subject to change. Installation dimensions remain unaltered for designs Special features suffix
5 Model Code VVP Series 1 Variable vane pump 2 Frame size 1-16, 20, 25 cm 3 /r 2-32, 40, 50 cm 3 /r 3-63, 80, 100 cm 3 /r 3 Nominal size / geometric displacement, max. pressure cm 3 /r cm 3 /r cm 3 /r 32-31,5 cm 3 /r cm 3 /r cm 3 /r cm 3 /r cm 3 /r cm 3 /r 4 Adjust. max. displacement stop S - With stop (Omit if not required.) bar (2300 psi) 150 bar (2200 psi) Mounting flange / port connections 6 Rotation viewed from shaft end R - Right hand (clockwise) only 7 Fluid compatibility M - Mineral oil E - Phosphate esters 8 Pump design number Subject to change. Installation dimensions remain unaltered for designs Code Mounting flange Port connections R ISO 3019/2 with straight keyed shaft G (BSPF) thread. (6-25 cm 3 /r pumps) RF ISO 3019/2 with straight bolts SAE 4-bolt flange with keyed shaft metric mounting (31,5-100 cm 3 /r pumps) PS SAE B 4-bolt with straight keyed shaft SAE UNF thread. (6-25 cm 3 /r pumps) PF SAE C 2-bolt with straight SAE 4-bolt flange with keyed shaft (only available UNC mounting bolts on a primary or single (31,5-100 cm 3 /r pumps) pump) PX ISO 3019/2 with straight SAE 4-bolt flange with keyed shaft (available UNC mounting bolts only on secondary pump) (31,5-100 cm 3 /r pumps) B Base plate mounting O-ring sealed (available only as ( cm 3 /r pumps) single pump) 9 Pump s C - Standard pressure compensator CR - Remote led pressure CD1 - Dual pressure with non-adjustable min.pressure CD2 - Dual adjustable pressure CE - Proportional pressure CVP - Load sensing compensator CVPR - Remote led load sensing CVPD1 - Load sensing with dual pressure with fixed minimum pressure CVPD2 - Load sensing with dual adjustable pressure CVPCE - Load sensing with proportional pressure CVT - Torque limiter CVTR - Remote led torque limiter CVTD - Torque with dual adjustable pressure CVTCE - Torque with proportional pressure 10 Electrical rating and wiring connection For CD*, CVPD*, CVTD pump s, three options below apply; for CE, CVPCE, CVTCE, only option 03 applies V AC 50 Hz with DIN plug connection V AC 60 Hz with 1 /2" NPT conduit box 03-24V DC with DIN plug connection (Omit if not required.) 11 Control pressure setting B bar ( psi) (sizes cm 3 /r) C bar ( psi) (sizes cm 3 /r) 12 Control adjustment Omit for CR, CE, CVPR, CVTD, CVPCE and CVTCE pump s. K - Micrometer knob (standard) KL - Micrometer knob with key lock 13 power setting in kw Applies to CVT pump only. ** - Factory setting of power limit in kilowatt; for example 04 = 4 kw 14 pressure setting Applies to CVT pump only. ** - Factory setting of pressure for zero flow in 10 bar increments; for example 15 = 150 bar 15 Control design number 10 - For all models. Subject to change. Installation dimensions remain unaltered for designs 16 Special features suffix
6 Eaton Lone Oak Road Eden Prairie, MN USA Tel: Fax: Eaton 20 Rosamond Road Footscray Victoria 3011 Australia Tel: (61) Fax: (61) Eaton 46 New Lane, Havant Hampshire PO9 2NB England Tel: (44) Fax: (44) Eaton Corporation All Rights Reserved Printed in USA Document No. V-PUVN-TP001-E October M
Vickers Service Data Vane Pumps Thru-Drive Vane Type Pump (F3)-35VT*(M)-**A(M)2-**-*-22-* Revised 2/98 I-3149-S
Vickers Vane Pumps MODEL VTA VTB VTBP VTC ADAPTER PLATE 584936 584922 ADAPTER 941296 941297 581833 941298 FOR BP MODELS AN ADAPTER AND SPACER IS REQUIRED. SPACER 02-136817 RETAINING COUPLING COUPLING RING
Vickers Service Data Vane Pumps ThruĆDrive Vane Type Pump (F3)-45VT*(M)-**A(M)2-**-*-22 Rev 2/98 I-3151-S
Vickers Vane Pumps MODEL VTA VTB VTBP VTC ADAPTER PLATE 584936 584922 ADAPTER 941296 941297 581833 941298 FOR BP MODELS AN ADAPTER AND SPACER IS REQUIRED. SPACER 02-136817 RETAINING COUPLING COUPLING RING
Vane Pump Series SDV. Fixed Displacement zp14. Catalogue HY0738-A/CH November Hydraulics. Hydraulics
SDV Fixed Displacement zp4 Catalogue HY078-/CH November 004 Contents SDV Introduction General applications instructions... Maximum speed... Pressure ratings... Minimum allowable inlet pressure... General
4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized.
Swivel Joints Table of Contents Advantages of using Eaton Swivel Joints 2 Selection Criteria and Product Safety Considerations 3 FS6500 4 Features and Benefits 4 Performance Testing 4 Repair Kit 10 BD5500
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
Valve adapters Hägglunds VA 1000
Valve adapters Hägglunds VA 1000 RE 15383 Edition: 12.2015 Replaces: New Valid for Hägglunds motors CA, CB, CBM Maximum flow 1000 l/min (264 gpm) Maximum pressure 350 bar (5076 psi) Example: Adapter Features
Proportional electrohydraulic controls for PVPC pumps pressure-flow combined P/Q controls, analog or digital
www.atos.com Table A70/E Proportional electrohydraulic controls for PVPC pumps pressureflow combined P/Q controls, analog or digital The variable displacement axial piston pumps type PVPC, can be supplied
Inductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)
COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl
TPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 156 / 1214 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump CONTENTS General Information...
F3 BHQ 4 67 D 1 A
BH*SINGLE VANE PUMP ORDERING CODE F3 BHQ 4 67 D 1 A 00 1 3 4 5 6 7 8 1- F3 means special seals for fire-resistant fluids. Omit if not required. - Pump Type: BHP = vane pump, industrial and mobile use,
Radial Piston Hydraulic Motor with Fixed Displacement MR, MRE
+ (0)0 69999 Radial Piston Hydraulic Motor with Fixed Displacement MR, MRE RE 8 Issue: 08.0 Replaces: 08.008 Sizes to 00 Nominal pressure 0 bar Maximum pressure up to 00 bar Displacement up to 090 cm orque
RL-H80 PARTS LIST # K
RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
1 - "F3" means special seals for fire-resistant fluids. Omit if not required
V* DOUBLE VANE PUMPS ORDERING CODE 1 - "F3" means special seals for fire-resistant fluids. Omit if not required - Pump Type: F3 VS 3 1 D 1 A A 1 3 7 VC = 1 vane pump, medium pressure application. VS =
Eaton Ultronics Management System
Eaton Ultronics Management System Electro-hydraulic CAN Bus Control System TS16 Unparalleled Control Precise Control Revolutionary Capability Integrated System The Eaton Ultronics Management system offers
Compact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
Radial Piston Hydraulic Motor with Fixed Displacement MR, MRE
Radial Piston Hydraulic Motor with Fixed Displacement MR, MRE RE 8 Issue: 09.0 Replaces: 08.0 Sizes to 00 Nominal pressure 0 bar Maximum pressure up to 00 bar Displacement up to 090 cm orque up to 800
RL-C20 PARTS LIST # G USE THIS PARTS LIST FOR: For older hoists use the following: Parts List No E for Serial Number 4200 to 14761
RL-C20 PARTS LIST # 102688G USE THIS PARTS LIST FOR: Hoist Serial Number 14762 to For older hoists use the following: Parts List No. 102688E for Serial Number 4200 to 14761 IF YOUR HOIST DOES NOT FALL
SPARE PARTS FOR HYDRAULIC MOTORS TYPE MLHS...-D XX
SPARE PARTS FOR HYDRAULIC MOTORS TYPE MLHS...-D - 41513200XX Code No 1 DUST SEAL 35x42x2 MP013V022 1 2 HOUSING For MLHS... SAE A, four bolts 51162 759 00 1 For MLHSA... SAE A-2 51162 762 00 1 For MLHSB...
"PVL" SERIES. Fixed Displacement - Single PVL1. Up to 5 MPa (730 PSI), 10.6 cm /rev (.647 CU.IN./rev)
"PVL" SERIES Fixed Displacement - Single PVL Up to 5 (70 ), cm /rev (7 CU.IN./rev) Pub. EC-0 The PVL series single pumps are designed for use with small size machine tools requiring comparatively low pressure
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 59 Individual mounting Series inline 35 100 Ext. pilot port Accumulator EXH. Pilot valve Function plate From accumulator Pilot exhaust To accumulator
Medium Pressure Filter Pi 3000
Medium Pressure Filter Pi 3000 Nominal pressure 0/315 bar (2850/44 psi), nominal size up to 400 according to DIN 24550 1. Features High performance filters for modern hydraulic systems Provided for pipe
Bulletin 871D Cylinder Position Inductive Style
Bulletin 871D Cylinder Position Inductive Style Description Bulletin 871D cylinder position inductive proximity sensors are self-contained solid state devices. These devices are designed for sensing metal
Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
Contents. Directional Control Valve 2 Series EPCV 452. Page 3. General Information. Page 4-5. Technical data. Page 6. Performance Curves.
Contents Page 3 Page 4-5 Page 6 Page 7 Page 8 Page 9 Page 10 General Information Technical data Performance Curves Dimensions : Hydraulic Valve and Accumulator Hydraulic Schematics Dimensions : Electrical
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 57 Individual mounting Series inline 35 To accumulator Sealed solenoid enclosure 100 200 Ext. pilot port Pilot valve Function plate From accumulator
T2 B Series. Compact Height Nitrogen Gas Springs
T2 B Series Compact Height Nitrogen Gas Springs ife in excess of 100,000 stroke meters. Cartridge design for easy maintenance. Oil pipe prevents oil leaving the springs in a hosed system and helps maintain
Inline filter. Features: RE 51402/09.10 Replaces: Types 100 FLEN 0160 to 0630; 100 FLE 0045, 0055, 0120
Inline filter RE 50/09.0 Replaces: 0.09 / Types 00 FLEN 060 to 060; 00 FLE 005, 0055, 00 Nominal sizes according to DIN 550: 060 to 060 Nominal sizes according to BRFS: 005, 0055, 00 Nominal pressure 00
Parts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
Loader Directional Control Valve
Engineering & Manufacturing Solutions Specifications: 10 gpm (38 lpm) Nominal Capacity Rated up to 4000 psi (275 bar) Port Sizes: - Inlet/Outlet #8 SAE - Work Ports #6 or #8 SAE Weighs 10.9 lbs. (4.9 kg)
MPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 55 Individual mounting Series inline 35 Sealed solenoid enclosure Manual operator 100 200 Ext. pilot port Ext. pilot Pilot filter Pilot exh. 55
Uni-Valve A /S UNI-EL UNI-EL Installation and operating manual. Electric actuator (UNI-EL-0020)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-EL Electric actuator Installation and operating manual UNI-EL-0020 (UNI-EL-0020)
Mini Bellows Pumps. 180 Hines Ave. Bellville, OH PH: FAX:
Mini Bellows Pumps Mini Bellows models are ideal for low flow, low pressure metering applications. The pump is constructed entirely of plastic and utilizes GRI s time-proven bellows technology to provide
P30-2. Overview. Pressure Transmitter Datasheet. *High Quality* 3 Years Warranty. At a Glance. Function. Application
P30-2 Pressure Transmitter Datasheet At a Glance *High Quality* 3 Years Warranty Premium Pressure Transmitter for gauge and pressure measurement with 3 years warranty High repeatability and long-term stability
Proportional relief valves type AGMZO-A* two stage, without integral pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F035-19/E Proportional relief valves type AGMZO-A* two stage, without integral pressure transducer, ISO 6264 size 10, 20 and 32 Main poppet Pilot relief valve type RZMO Mechanical pilot
SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet
SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm
Compliance with API Standard 670 the PRO Product Standard for Proximity Probes
Connection Technology Center, Inc. 7939 Rae Boulevard Victor, New York 14564 Toll Free: (800) 999-5290 Phone: (585) 924-5900 Fax: (585) 924-4680 Compliance with API Standard 670 the PRO Product Standard
Section CH-1. Combo Hydraulics (K220/L90LS Valve) - Implement Pumps. T800 Parts Module CH Combo Hydraulics - Implement Pumps
Section CH-1 Combo Hydraulics (K220/L90LS Valve) - Implement Pumps T800 Parts Module CH-51220 Combo Hydraulics - Implement Pumps Last Updated - 06/01/2003 Combo Hydraulics - Implement Pumps Combo Hydraulics
Digital Proportional Power Plug
Digital Proportional Power Plug GB Installation and startup guideline for Digital Power Plug for proportional valves EHH-AMP-702-D/C/K-R-P-1-30 EHH-AMP-712-D/G-R-P-1-30 EHH-AMP-702/712-N-C-N-3-30 EHH-AMP-702-D-R-P-2-30
EPX2555 Advantage Series Piston Pump
EPX Advantage Series Piston Pump Owner s Manual Do not use this equipment before reading this manual! Model Numbers: 00 Upright Cart Complete 00 Low Boy Cart Complete NOTE: This manual contains important
Proportional relief valves type RZMO-A* direct operated, without integral pressure transducer, ISO 4401 size 06
www.atos.com Table F007-20/E Proportional relief valves type RZMO-A* direct operated, without integral pressure transducer, ISO 440 size 06 Valve body Proportional solenoid Spring Poppet Integral electronics
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
MODEL SW6000 & SM6100 CENELEC INSTRUCTIONS
MODEL SW6000 & SM6100 CENELEC INSTRUCTIONS Installation Manual 1180 METRIX Experience Value 8824 Fallbrook Dr. Houston, TX 77064, USA Tel: 1-281-940-1802 After Hours Technical Assistance: 1-713-702-8805
Seals material: omit for NBR (mineral oil & water glycol) PE = FPM. Series number
www.atos.com Table F40-6/E Proportional flow valves type QVHZO-AES, QVKZOR-AES pressure compensated, direct operated, without position transducer, ISO 440 size 06 and 0 AES execution included in this table
Cool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
STANDARD CARTRIDGE VALVES 2/2-WAY
STNDRD CRTRIDGE VLVES -WY SERIES NG NG ulletin - DESIGNTION SYMOL PGE General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves - -way Cartridge
5/2 and 5/3 Directional-control valves, Series TC 15, G 1/4
5/2 and 5/3 Directional-control valves, Series TC 15, G 1/4 Products 5/2 Directional-control valve, single valve, electrical connection M8 (4 poles) 5/3 Directional-control valve, single valve, electrical
T E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
Oil Solutions. Phone Fax Low Pressure Filter. Pi Features.
Oil Solutions Phone 0421 336 009 Fax 03 9012 4332 sales@oilsolutions.com.au www.oilsolutions.com.au Low Pressure Filter Pi 0 Operating pressure 25/63 bar, Nominal size up to 450 1. Features. _ Efficient
G 3000 OH ( ) 650 Spare parts list G 3050 ( ) 10 Frame 20 Pump set. 23 Cylinder head
Table of contents G 3000 OH (.07-28.0) 650 Spare parts list G 3050 (9.39-203.0) 0 Frame 20 Pump set 2 Cylinder head 4 Valve (3 Stück) (2.884-96.0) 4 Nozzle insert only for replacement (4.769-034.0) 22
icountpd Online Particle Detector
Online Particle Detector The icountpd from Parker represents the most up-to-date technology in solid particle detection. The design dynamics, attention to detail, and small size of the permanently mounted,
Features: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
Tool Clamping. No > Pressure generators. > Clamping bars. > Pressure-generator accessories. No ** > Clamping heads
Tool Clamping No. 6906P > Pressure generators No. 6906PB** > Pressure-generator accessories No. 6945-22-20 > Clamping bars No. 6945-22 > Spacer bars No. 6945-11-** > Clamping heads No. 6946 > Wedge clamp
T2 B Series. Compact Height Nitrogen Gas Springs
T2 B Series Compact Height Nitrogen Gas Springs ife in excess of 100,000 stroke meters. Cartridge design for easy maintenance. Oil pipe prevents oil leaving the springs in a hosed system and helps maintain
TSE. Functional Description. Order Code TSE HA /2010. Electrical Pressure Switch N D. p max up to 400 bar (5801 PSI)
Electrical Pressure Switch TSE HA 90 /010 p max up to 400 bar (5801 PSI) Electronic pressure switch TSE To monitor the pressure in the circuit and the signalisation switching after reaching pre-set pressure
seal leak & temperature relays
seal leak & temperature relays 2014 catalog a of products 800.238.7474 www.macromatic.com sales@macromatic.com 1 SINGLE & DUAL CHANNEL SFP Series SFP Series Pump Seal Failure Relays are designed to monitor
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. h y d r a u l i c s. Hydraulics Division Eaton / Char-Lynn Hydraulic Products
H y d r a u l i c s ydraulics Hydraulics Division Eaton / Char-Lynn Hydraulic Products h y d r a u l i c s We Manufacture No. 11-895 January 1999 Solutions S o l u t i o n 1 s Experienced system design
Eaton ET5040 Crimp Machine Operator's Manual
Eaton ET5040 Crimp Machine Operator's Manual ET5040 Operator's Manual Table of Contents Safety Instructions.... 3 Specifications.... 4 Machine Setup and Installation Environment.... 4 Height Adjustment....
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
Liquid Level Monitoring System LW4/LW5 - Low or High Level Control
Liquid Level Monitoring System /LW5 - Low or High Level Control Technical Bulletin and LW5 are self-contained units intended for liquid level monitoring at the sight glass or plugged connection of vessels,
LS series. Electrical Position Indicators for Quarter Turn Actuators
0 Electrical Position ndicators for Quarter Turn Actuators Construction The GEMÜ electrical position indicators are used to indicate and monitor the position of quarter turn valves. Depending on the version,
Solenoid Valves PN16 for gas flow interception
s 7 684 INTELLIGAS Solenoid Valves PN16 for gas flow interception E... 2 way solenoid valves, threaded or flanged connections, brass or bronze body. 12V DC or 230V AC coil with manual reset. Normally Open
Standard Cartridge Valves 2/2 Way Series NG16 NG100
Standard Cartridge Valves Way Series NG NG Table of Contents Designation Symbol Page General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves
Proportional reducing valves type AGRCZO-AES two stages, normally closed, without integral pressure transducer, ISO 5781 size 10 and 20
www.atos.com Table F050-8/E Proportional reducing valves type AGRCZO-AES two stages, normally closed, without integral pressure transducer, ISO 5781 size 10 and 20 Main poppet Pilot relief valve type RZMO
Parts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
Proportional relief valves type AGMZO-AES two stage, without integral pressure transducer, ISO 6264 size 10, 20 and 32
www.atos.com Table F035-20/E Proportional relief valves type AGMZO-AES two stage, without integral pressure transducer, ISO 6264 size 10, 20 and 32 1 MODEL CODE AGMZO Proportional pressure relief valve
Model QRS CPVS
SPARE PARTS LIST EN CP COMPRESSOR Model QRS 0-5 - 0 CPVS 0-5 - 0 6 05 50 65 KEY - Door Panel: 655900 Lock - Door Panel: 005076 QRS 0 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? KIT
Proportional relief valves type RZMO-A*
www.atos.com Table F007-9/E Proportional relief valves type RZMO-A* direct operated, without integral pressure transducer, ISO 440 size 06 Valve body Proportional solenoid Spring Poppet Integral electronics
Proportional throttle cartridges type LEQZO-A*, 2-way without position transducer, nominal sizes 16, 25 and 32
www.atos.com Table F310-5/E Proportional throttle cartridges type LEQZO-A*, 2-way without position transducer, nominal sizes 16, 25 and 32 Spool Cartridge Pilot valve Integral electronics Communication
C-Series C142 Machine Controller Eurocard DIN Packaged Systems
C-Series C142 Machine Controller Eurocard DIN Packaged Systems FEATURES: Available as 2- or 3-axes CNC Controller Remote START/STOP/RESET Bidirectional serial communication at up to 192 baud 32K of on-board
P027 Series Pressure Transducer Installation & Operation Manual
trans metrics, Division of United Electric Controls P027 Series Pressure Transducer Installation & Operation Manual 5325 Naiman Parkway Solon, Ohio 44139 Phone: 440-248-2229 Fax: 440-248-7780 www.trans-metrics.com
SYSTEMS ELECTRONICS GROUP
SYSTEMS ELECTRONICS GROUP SYSTEMS M4500 MACHINE COMPONENTS RSV34-MS1 RESOLVER with MS CONNECTOR Brushless, Single-turn Resolver Rated to 3,000 RPM Rotary Position Transducer for M4500, M4020, M4040, M4041,
Your Global Flow Control Partner. Series 50 Valve Status Monitor Operation and Maintenance Manual
Your Global Flow Control Partner Series 50 Valve Status Monitor Table of Contents 1. Definition of Terms... 2 2. Safety... 2 3. Storage... 3 4. Commissioning... 3 4.1. Mounting your VSM... 3 4.2. Wiring
Electronic pressure switch with display Model PSD-4
Electronic pressure measurement Electronic pressure switch with display Model PSD-4 WIKA data sheet PE 81.86 Applications Machine tools Hydraulics and pneumatics Pumps and compressors Special-purpose machine
SMART FORCE AND TORQUE SENSORS. User s Guide
SMART FORCE AND TORQUE SENSORS Thank you Thank you for purchasing a Mark-10 Plug & Test TM remote sensor, designed for use with Mark-10 models 7i, 5i and 3i force/torque indicators. With proper usage,
GPX 1250 Gas Piston Pump
GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.
Operating instructions ClassicLine module AC5204 / AC5209 / AC5212 AC5235 / AC5236 / AC5237 AC /00 07/2017
Operating instructions ClassicLine module AC5204 / AC5209 / AC5212 AC5235 / AC5236 / AC5237 AC5274 7390889/00 07/2017 Contents 1 Functions and features...3 2 Operating and display elements...3 3 Installation...4
DREXELBROOK. Datasheet Universal IV In-Line Water Cut Meter. with Spool Piece Mounting USE THE BEST APPLICATIONS. Eliminate Routine Maintenance
USE THE BEST For over 50 years, Drexelbrook has been the world s leader in capacitive based measurements by providing reliable and accurate products at a reasonable cost. We offer the highest pressure
SIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
General Specifications
General Specifications Model PR10 Inductive Conductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 1300 Individual mounting Series sub-base plug-in 35 100 Pilot air accumulator Internal pilot supply check valve Moisture and dust seal Manual operator
N05010/N10010 NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR MODULATING AND FLOATING / 2-POSITION CONTROL SPECIFICATIONS
N/N NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR MODULATING AND FLOATING / -POSITION CONTROL SPECIFICATIONS Supply voltage Nominal voltage PRODUCT DATA Vac/dc -%/+%, /6 Hz Vac/dc, /6 Hz All values
Pressure transmitter for highest pressure applications Up to 217,500 psi (15,000 bar) Model HP-2
Electronic pressure measurement Pressure transmitter for highest pressure applications Up to 217,500 psi (15,000 bar) Model HP-2 WIKA data sheet PE 81.53 Applications Test bench construction Water jet
Thread Lubricant: Use a process compatible fluid Wrench Torque: in-lbs ( Nm)
Common Specifications (applies to all fittings in this datasheet) DESCRIPTION is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections without
1220 Self-Contained Carpet Extractor
0 Self-Contained Carpet Extractor Operator and Parts Manual TENNANT COMPANY Commercial Products RANSOM STREET HOLLAND MI U.S.A. FAX: 00 0 CUSTOMER SERVICE: 00-00 Rev. 00 (-) ELECTRICAL DIAGRAMS Tennant
F250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
Industrial Hydraulics FAQs
Industrial Hydraulics FAQs FAQ Title: Z versus K or K0 in model code Category: Proportional & Servo Valves Sub-Category: Directional Control Valves Bosch Rexroth Corporation Hydraulics 5 City Line Road
Electropneumatic miniature control valves Mounting Connectors Minisolenoid valves Indicators LED seals LED Valve modules Poppet 3/2 single pilot 4/2 s
ElectroPneumatic Miniature Control Valves Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com /47 Electropneumatic miniature control valves Mounting Connectors Minisolenoid
Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550
Data sheet Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550 The P500 / P507 / P550 utilizes the thin film strain gauge sensing technology, incorporating an hermetically
Solutions. ydraulics. We Manufacture. H y d r a u l i c s. h y d r a u l i c s. Hydraulics Division Char-Lynn Hydraulic Products. S o l u t i o n 1 s
H y d r a u l i c s ydraulics Hydraulics Division Char-Lynn Hydraulic Products h y d r a u l i c s We Manufacture November 1998 Solutions S o l u t i o n 1 s Experienced system design engineers - s-based
Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.
Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast
Control block EDC Modular Directional Valve Flow Sharing System
Control block EDC Modular Directional Valve Flow Sharing System 2 Control block EDC Modular Directional Valve Flow Sharing System osch Rexroth Oil Control S.p.. introduces the EDC size 06 dvantages directional
Frequency Output Depth and Pressure Transducers. Seismic Stuff Technology Pte. Ltd.
Frequency Output Depth and Pressure Transducers Seismic Stuff Technology Pte. Ltd. Revision 1.12 Date 10 th August 2010 COPYRIGHT & DISCLAIMER NOTICE All information and material within this document are