Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.
|
|
- Delilah Bryant
- 6 years ago
- Views:
Transcription
1 Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast Coupling for Monitoring and control of pressure Venting Sampling in ig- and low-pressure systems Filling of accumulators (special filling-version) Advantages Test system at working pressure Leak proof connection before piston valve is open Simple connection to measurement, control and switcing devices Self locking metal protective cap Working Pressure Max. working pressure 630 bar / 9137 PSI For SKK Type and K te recommended working pressure of fitting manufacturer sould be noted. Connection under pressure up to 400 bar / 501 PSI max. Materials : Optional: Stainless Steel V2A ( / AISI 303) on request Stainless Steel V4A ( / AISI 316Ti) on request For ordering "V2A" or "V4A" please replace "C6F" wit "V2A" or "V4A". : P = NBR (Buna-N ) (Temperature range -20 C C / -4 F F) Note: Internal sealings made of FPM, even for standard NBR-type. V = FPM (Viton )* (Temperature range -20 C C / -4 F F) * Standard option for Nort America is FPM (Viton ) E = EPDM Etylene Propylene Diene Monomer Rubber (for Brake fluid, Temperature range -40 C C / -40 F F) For ordering NBR or EPDM sealings please replace "V" wit "P" or "E". Vibration safety O-ring made of NBR (Buna-N ) (standard). Media Suitable for ydraulic oils and oter Mineral oil based fluids (Ceck compatibility of seal material) For use wit oter liquid media please consult STAUFF In case of ultimate tigtness requirements for gaseous media, a special as-type is available Te complete STAUFF-Test-12-type-SKK range is also available wit a plastic protection cap. For ordering te plastic protection cap version please add "-KK" to te order code. (e.g. SKK12-M10x1-VA-KK-C6F) SKK12 Test Coupling wit Port Connection SKK12 Type Test Coupling complete wit Straigt Fitting SKK12 Type K Test Coupling for 24 Cone Fittings SSKK12 Bulkead B22
2 / Order Codes Connection Tread S12,65 x 1,5 Test 12 Test Coupling wit Port Connection SKK12 S 12 * (.59) (.31) Tread Sealing Working Order Codes Pressure (mm /in) ( bar /PSI) 1 2 Hex (Standard Option-Nort America) 250 3,5 14 M x 1 SKK12-Mx1-PA-C6F SKK12-Mx1-VA-C6F Type A , 14 M10 x 1 SKK12-M10x1-PA-C6F SKK12-M10x1-VA-C6F M12 x 1, SKK12-M12x1,5-PB-C6F SKK12-M12x1,5-VB-C6F M14 x 1, SKK12-M14x1,5-PB-C6F SKK12-M14x1,5-VB-C6F M16 x 1,5 Type B SKK12-M16x1,5-PB-C6F SKK12-M16x1,5-VB-C6F 1/ SKK12-1/4-PB-C6F SKK12-1/4-VB-C6F 3/ SKK12-3/-PB-C6F SKK12-3/-VB-C6F M12 x 1, SKK12-M12x1,5-PC-C6F SKK12-M12x1,5-VC-C6F 1/ Type C SKK12-1/-PC-C6F SKK12-1/-VC-C6F 1/ SKK12-1/4-PC-C6F SKK12-1/4-VC-C6F R1/ K SKK12-R1/K-PD-C6F SKK12-R1/K-VD-C6F R1/4 K SKK12-R1/4K-PD-C6F SKK12-R1/4K-VD-C6F Type D / NPT SKK12-1/NPT-PD-C6F SKK12-1/NPT-VD-C6F /4 NPT SKK12-1/4NPT-PD-C6F SKK12-1/4NPT-VD-C6F 5/16 24 UNF , SKK12-5/16UNF-PE-C6F SKK12-5/16UNF-VE-C6F 7/16 20 UNF , SKK12-7/16UNF-PE-C6F SKK12-7/16UNF-VE-C6F 1/2 20 UNF Type E , SKK12-1/2UNF-PE-C6F SKK12-1/2UNF-VE-C6F 9/16 1 UNF SKK12-9/16UNF-PE-C6F SKK12-9/16UNF-VE-C6F M12 x1, SKK12-M12x1,5-PE-C6F SKK12-M12x1,5-VE-C6F Treads * 1 Special tread: buttress tread S12,65 x 1,5 For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Sealing Details O-ring Type A Metal Joint Type B Elastomeric Sealing Type C Taper Type D (suitable sealant required) O-ring Type E Standard material: Steel For ordering te plastic protection cap version please add "-KK" to te order code. (e.g. SKK12-M10x1-VA-KK-C6F) STAUFF B Test For furter information on materials, sealings or protection caps, please see page B22. Oter port connections and sealings on request. Please consult STAUFF for furter information. Dimensional drawings: All dimensions in mm (in). B23
3 Test 12 Connection Tread S12,65 x 1,5 / Order Codes Test Coupling complete wit Straigt Fitting SKK12 Type Hex A Hex B SW 14 (Hex.55) Ød l2 l 2 l1 Compression ring fittings acc. to ISO / DIN 2353 For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Standard material: Steel For ordering te plastic protection cap version please add "-KK" to te order code. (e.g. SKK12-06L-V-KK-C6F) For furter information on materials, sealings or protection caps, please see page B22. Series PN Pipe Order Codes ( bar /PSI) Ød ~l1 l2 Hex A Hex B (Standard Option-Nort America) SKK12-06L-P-C6F SKK12-06L-V-C6F SKK12-0L-P-C6F SKK12-0L-V-C6F SKK12-10L-P-C6F SKK12-10L-V-C6F , SKK12-12L-P-C6F SKK12-12L-V-C6F L SKK12-15L-P-C6F SKK12-15L-V-C6F SKK12-1L-P-C6F SKK12-1L-V-C6F SKK12-22L-P-C6F SKK12-22L-V-C6F , SKK12-2L-P-C6F SKK12-2L-V-C6F SKK12-35L-P-C6F SKK12-35L-V-C6F , SKK12-42L-P-C6F SKK12-42L-V-C6F SKK12-06S-P-C6F SKK12-06S-V-C6F SKK12-0S-P-C6F SKK12-0S-V-C6F SKK12-10S-P-C6F SKK12-10S-V-C6F SKK12-12S-P-C6F SKK12-12S-V-C6F S , SKK12-14S-P-C6F SKK12-14S-V-C6F SKK12-16S-P-C6F SKK12-16S-V-C6F SKK12-20S-P-C6F SKK12-20S-V-C6F , SKK12-25S-P-C6F SKK12-25S-V-C6F SKK12-30S-P-C6F SKK12-30S-V-C6F , SKK12-3S-P-C6F SKK12-3S-V-C6F B24 Dimensional drawings: All dimensions in mm (in).
4 / Order Codes Connection Tread S12,65 x 1,5 Test 12 SW (Hex.67).55) 30 (1.1) SW (Hex.67) l3 33 (1.30) 33 (1.30) l 3 Test Coupling for 24 Cone Fittings SKK12 Type K Hex A l 3 l3 Hex AA ØdØ d ØdØ d Version A Version B Series PN Pipe Tread Version Order Codes ( bar /PSI) Ød l3 Hex A (Standard Option-Nort America) 6 15, M12 x 1,5 A SKK12-06L-PK-C6F SKK12-06L-VK-C6F 15, M14 x 1,5 A SKK12-0L-PK-C6F SKK12-0L-VK-C6F 16, M16 x 1,5 A SKK12-10L-PK-C6F SKK12-10L-VK-C6F , M1 x 1,5 A SKK12-12L-PK-C6F SKK12-12L-VK-C6F L M22 x 1,5 B SKK12-15L-PK-S-C6F SKK12-15L-VK-S-C6F 1 19, M26 x 1,5 B SKK12-1L-PK-S-C6F SKK12-1L-VK-S-C6F 22 20, M30 x 2 B SKK12-22L-PK-S-C6F SKK12-22L-VK-S-C6F M36 x 2 B SKK12-2L-PK-S-C6F SKK12-2L-VK-S-C6F M45 x 2 B SKK12-35L-PK-S-C6F SKK12-35L-VK-S-C6F M52 x 2 B SKK12-42L-PK-S-C6F SKK12-42L-VK-S-C6F 6 14, M14 x 1,5 A SKK12-06S-PK-C6F SKK12-06S-VK-C6F 16, M16 x 1,5 A SKK12-0S-PK-C6F SKK12-0S-VK-C6F , M1 x 1,5 A SKK12-10S-PK-C6F SKK12-10S-VK-C6F 12 17, M20 x 1,5 A SKK12-12S-PK-C6F SKK12-12S-VK-C6F S 14 19, M22 x 1,5 B SKK12-14S-PK-S-C6F SKK12-14S-VK-S-C6F M24 x 1,5 B SKK12-16S-PK-S-C6F SKK12-16S-VK-S-C6F M30 x 2 B SKK12-20S-PK-S-C6F SKK12-20S-VK-S-C6F M36 x 2 B SKK12-25S-PK-S-C6F SKK12-25S-VK-S-C6F M42 x 2 B SKK12-30S-PK-S-C6F SKK12-30S-VK-S-C6F M52 x 2 B SKK12-3S-PK-S-C6F SKK12-3S-VK-S-C6F For DKO connection According to ISO / DIN 2353 Version A: one-piece design Version B: screwed design For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Standard material: Steel For ordering te plastic protection cap version please add "-KK" to te order code. (e.g. SKK12-06L-VK-KK-C6F) For furter information on materials, sealings or protection caps, please see page B22. STAUFF B Test Dimensional drawings: All dimensions in mm (in). B25
5 Test 12 Connection Tread S12,65 x 1,5 / Order Codes Bulkead SSKK12 Hex max.12 (max.47) Hex Treads * 1 Special tread: buttress tread S12,65 x 1,5 For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Tread Order Codes Hex (Standard Option-Nort America) S12* 1 SSKK12-P-C6F SSKK12-V-C6F Standard material: Steel For ordering te plastic protection cap version please add "-KK" to te order code. (e.g. SSKK12-V-KK-C6F) For furter information on materials, sealings or protection caps, please see page B22. Swivel Run Tee wit JIC Connection SV-JIC Type F/M 7/16-20 UNF Hex A Hex B 37 Tread d1 37 d2 Tread l1 l4 15 (.59) l3 l2 For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For furter information please consult STAUFF. Tread Order Codes inc Ø d1 Ø d2 l1 l2 l3 l4 Hex A Hex B 7/16 20 UNF 7,49 4, /16 1 UNF 11,05,1 10, ,5, /4 16 UNF 15,9 10, 10,5 16,7 43, SV-7/16UNF-04-JIC1/4-F/M-C6F SV-7/16UNF-06-JIC3/-F/M-C6F SV-7/16UNF-0-JIC1/2-F/M-C6F 1-1/16 12 UNF 21,6 16,9 15,4 21,9 50,4 13, SV-7/16UNF-12-JIC3/4-F/M-C6F /16 12 UNF 27,9 23,2 17,3 23,1 53, SV-7/16UNF-16-JIC1-F/M-C6F B26 Dimensional drawings: All dimensions in mm (in).
6 / Order Codes Connection Tread S12,65 x 1,5 Test 12 S12* 1) 1 S12* 1 Adaptor SAD12 Version A Version B Tread Version Order Codes (Standard Option-Nort America) M16 x A SAD12/20-P-C6F SAD12/20-V-C6F M16 x 1, A SAD12/15-P-C6F SAD12/15-V-C6F Plug in B SAD12/10-P-C6F SAD12/10-V-C6F Treads * 1 Special tread: buttress tread S12,65 x1,5 For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". STAUFF B Test For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Hex AA max.12 (max.47) auge Adaptor SMA12 Direct auge Adaptor SMD12 SW 19 (Hex.75) Hex A Troug ole Ø 1 (.71) S12 *1 auge Adaptor SMA15 S12* 1 Direct auge Adaptor SMD15 Tread Order Codes Hex A (Standard Option-Nort America) 1/ SMA12-1/4-P-OR-C6F SMA12-1/4-V-OR-C6F 1/ SMA12-1/2-P-OR-C6F SMA12-1/2-V-OR-C6F 1/4 NPT SMA12-1/4NPT-P-C6F SMA12-1/4NPT-V-C6F 1/2 NPT SMA12-1/2NPT-P-C6F SMA12-1/2NPT-V-C6F 1/ SMD12-1/4-P-OR-C6F SMD12-1/4-V-OR-C6F 1/ SMD12-1/2-P-OR-C6F SMD12-1/2-V-OR-C6F 1/4 NPT SMD12-1/4NPT-P-C6F SMD12-1/4NPT-V-C6F 1/2 NPT SMD12-1/2NPT-P-C6F SMD12-1/2NPT-V-C6F Treads * 1 Special tread: buttress tread S12,65 x1,5 For ordering V2A ( / AISI 303) replace "C6F" wit "V2A". For ordering V4A ( / AISI 316Ti) replace "C6F" wit "V4A". For ordering NBR sealings replace "V" wit "P". For ordering EPDM sealings replace "V" wit "E". * Standard option for Nort America is FPM (Viton ). Snubber on request. Dimensional drawings: All dimensions in mm (in). B27
7 STAUFF Test eneral Tecnical Information Port Connections and Sealing Details Type A d1 30 Type A - Treaded port according to factory standard Sealing: O-ring Type A Tread M x 1 M10 x 1 d1 +0,1 min. min 9, , , , ,5 2,5 Type B and C Type B 0,1A A d1 Type C a Type B and C - Treaded port type X acc. to DIN 352 Part 1 and 2; ISO (metric); ISO (inc) Sealing: Metal joint Type B / Elastomeric sealing Type C Tread d1 min. min. min. a max. M10 x M12 x 1, , M14 x 1, , M16 x 1, , M1 x 1, M20 x 1, M22 x 1, , / 15,5 10, / ,5 15,5 1, / 23 12,5 15, /2 2 14,5 1,5 2, Type D Type D - Parallel treaded port type Z according to DIN 352 Part 2 (inc) Sealing: Taper Type D suitable sealant required Tread 90 min. min. Rp1/ 5,5 9, Rp1/4,5 13, Rp3/,5 13, Rp1/2 10,5 16, B46 Dimensional drawings: All dimensions in mm (in).
8 eneral Tecnical Information STAUFF Test Port Connections and Sealing Details Type D Type D - Taper treaded port according to ANSI/ASME B (NPT) Sealing: Taper Type D suitable sealant required Tread 90 min. min. 1/ 27 NPT 6,9 11, /4 1 NPT 10 16, /2 14 NPT 13,6 22, Type E Type E - Treaded port according to ISO (metric); ISO (UNF) Sealing: O-ring Type E Tread STAUFF B Test A 0,2 A 0,1 A d2 d1 z b a d1 +0,1 d2 min. min. min. a +0,4 b max. z ±1 M10 x 1 11, ,5 1, M12 x 1,5 13, 19 11,5 14 2,4 1, M14 x 1,5 15, 21 11,5 14 2,4 1, M16 x 1,5 17, ,5 2,4 1, M22 x 1,5 23, 29 15,5 1 2, M27 x 2 29, , /16 24 UNF 9, ,9 1, /16 24 UNF 12, ,5 14 2,4 1, /2 20 UNF ,5 14 2,4 1, /16 1 UNF 15, ,7 15,5 2,5 1, / 14 UNF 23, ,7 20 2,5 2, Dimensional drawings: All dimensions in mm (in). B47
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More informationTemperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
More informationElectromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
More informationUNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
More informationType MIT. WEH - We Engineer Hightech. WEH Connector for pressure and vacuum testing DATA SHEET. on components with internal thread
DT SHEET D-2011/09/00027-7-3 Date: 07/2014 Type MIT WEH for pressure and vacuum testing on components with internal thread WEH - We Engineer Hightech Type MIT WEH for internal threads DT SHEET General
More informationDue to the extensive inventory, both customized special parts and special product combinations are available.
D Diagtronics The STAUFF Diagtronics programme provides components and services for monitoring and analysing hydraulic fluids in mobile and industrial hydraulic systems. The range includes analog stainless
More informationThe range includes analog stainless steel pressure gauges to high-quality, high-end laser particle counters.
STAUFF Corperation Call us today 201.444.7800 or visit CLAMPS Home TEST FILTRATION DIAGTRONICS ACCESSORIES VALVES FLANGES ACCUMULATORS Diagtronics Pressure Gauges PPC Series Laser Particle Counters Sensors
More informationQuality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
More informationselection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
More informationP30-2. Overview. Pressure Transmitter Datasheet. *High Quality* 3 Years Warranty. At a Glance. Function. Application
P30-2 Pressure Transmitter Datasheet At a Glance *High Quality* 3 Years Warranty Premium Pressure Transmitter for gauge and pressure measurement with 3 years warranty High repeatability and long-term stability
More information15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
More informationNon-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More informationNon-Drip Quick Connect Couplings
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationInsertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
More informationStandard oil drain plug
PRODUCTS STANDARD OIL DRAIN PLUG STANDARD DRAIN SB Standard oil drain plug The Standard Drain is the original Femco oil drain plug, and was introduced in 1983 to change oil in a quick, clean and environmentally
More informationRSK. Wafer Type Check Valve. Construction. Features. Advantages
Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
More informationBSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
More informationDue to the extensive inventory, both customized special parts and special product combinations are available.
D Diagtronics The STAUFF Diagtronics programme provides components and services for monitoring and analysing hydraulic fluids in mobile and industrial hydraulic systems. The range includes analog stainless
More informationSPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet
SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationTEX. Spare parts list 18PS 19PE 22PS 23PE 27PS 28PE. Handheld pneumatic breakers Atlas Copco Construction Tools AB No j
TEX 18PS 19PE 22PS 23PE 27PS 28PE Spare parts list Handheld pneumatic breakers 2010 Atlas Copco Construction Tools AB No. 9853 6035 90j 2010-02-19 TEX 18PS 19PE 22PS 23PE 27PS 28PE Contents Contents SPARE
More informationSPH/BA Motorsports. Clean-break couplings for high pressure circuits
SPH/BA Motorsports Clean-break couplings for high pressure circuits Choose SPH/BA couplings... Applications - shock absorbers, brake and hydraulic lines - lubrication and coolants Combine lightweight and
More informationAssembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
More informationIndustrial Pressure Transmitter
NAT 8 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The industrial transmitter
More informationMedium Pressure Filter Pi 3000
Medium Pressure Filter Pi 3000 Nominal pressure 0/315 bar (2850/44 psi), nominal size up to 400 according to DIN 24550 1. Features High performance filters for modern hydraulic systems Provided for pipe
More informationLevel and temperature switch Nivotemp NT-M, NT-MD
Level and temperature switch Nivotemp NT-M, NT-MD Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored. Here, modern factory automation requires compatible
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationTEX 07PE. Spare parts list. Handheld pneumatic pick hammers. Valid from serial number
TEX 07PE Spare parts list Handheld pneumatic pick hammers TEX 07PE TEX 07PE FSH Valid from serial number 0009 0009 0 Atlas Copco Construction Tools AB No. 9800 08 0a 0005 TEX 07PE Contents Contents General
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 55 Individual mounting Series inline 35 Sealed solenoid enclosure Manual operator 100 200 Ext. pilot port Ext. pilot Pilot filter Pilot exh. 55
More informationPilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC
D11/D1 Series (general purpose valve) D11/D1 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Refer to Ending 17 for more details. JIS symbol Common
More informationSV81H Safety and Relief Valve
Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.
More informationKF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
More informationIllustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
More informationpneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
More informationDN40 (1 1/2") - DN200 (8") Hot Tappings
DN40 ( /2") - DN200 (8") Hot Tappings TONISCO B30 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN40 DN200 by completing it with proper adapters.
More informationGeneral Characteristics DM 80 Series - JIS Metric Tube
General haracteristics DM 80 Series - JIS Metric Tube Introduction Fitting Material Specifications K = Stainless Steel G = arbon Steel = opper Nickel 70/30 = opper Nickel 90/10 D = Duplex Z = Super Duplex
More informationKF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Bellows are even provided for forming joints with main pipelines or sometimes
More informationV88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
More informationSeries 95000, 2/2 Direct solenoid actuated poppet valve
> Port size: /4 (ISO G or NPT), G/ > Working from 0 bar up > Short switching times > Suited for fine vacuum down to,33 x 0 - mbar > For a.c. solenoid systems with integrated rectifier (40... 60 Hz) > Variable
More informationLevel switch NS 10/NS 25..-AM
Level switch NS 10/NS 25..-AM Fluidcontrol Oil tanks in lubrication and oil supply systems are often under overpressure compared to the ambient atmosphere. All oil moistened parts of devices mounted externally
More informationV88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
More informationACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT
Accessories ACCESSORIES Accessories to suit every sensor! Whether it's electrical connectors, mechanical adapters or the instrument mounting clamps, the wide range of products from HYDAC offers solutions
More informationLevel and temperature switch Nivotemp NT-M, NT-MD
Level and temperature switch Nivotemp NT-M, NT-MD Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored. Here, modern factory automation requires compatible
More informationDigital O.R.P. Transmitter Type 8206
Advantages / Benefits Design Compact O.R.P. Transmitter Type 8206 The O.R.P. transmitter compactly combines an O.R.P. sensor and an electronic with display in splash-proof plastic NEMA 4 (IP 65) enclosure.
More informationFactory for oil sight glass fittings from Brass Aluminium Stainless steel
Factory for oil sight glass fittings from Brass Aluminium Stainless steel MECANOSOL, S.L. Pol. Ind. La Pañoleta c./ Julio de Torres, 14 29700 Vélez-Málaga SPAIN www.mecanosol.com info@mecanosol.com Tel.:
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More information95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves
9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to,33 0 - mbar > > For a.c. solenoid systems with
More informationStandardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology
More information21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
More informationStainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More informationOperating Instructions Bedienungsanleitung Mode d emploi Gebruiksaanwijzing Istruzioni per l uso Instrucciónes para el manejo HPM110
Operating Instructions Bedienungsanleitung Mode d emploi Gebruiksaanwijzing Istruzioni per l uso Instrucciónes para el manejo HPM110 Contents 1 Introduction 2 1.1 Notes on safety / production selection
More informationJOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
More informationThis is an economic model, especially suitable for instruments with ¼ port connection. Not detachable to repair.
Diaphragm seals - Stainless steel d. seals ¼ - PVC diaphragm seals ¼ - Stainless steel d. seals ½ - PVC diaphragm seals ½ - Easy-to-clean diaphragm seals - High pressure diaphragm seals - Low pressure
More informationCode Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
More informationFxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 59 Individual mounting Series inline 35 100 Ext. pilot port Accumulator EXH. Pilot valve Function plate From accumulator Pilot exhaust To accumulator
More information21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
More informationHERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
More informationFF Series (Steel) ISO Interchange
Eaton s FF Series flat face is specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability
More informationSensors and Switches.
Introduction The continuous monitoring of critical hydraulic systems has become normal in today s market. The automatic and timely detection of problems in hydraulic systems can predict component failure
More informationFlow measurement FlexFlow PF20S Flow sensor for industrial applications
Product highlights Parallel measurement of flow and temperature Flow measurement independent of the mounting position Large measuring range up to 400 cm/s Measurement at high media temperatures up to 125
More informationModel 685 Model 885. Model 985
Full lift safety valve with spring loading. (AIT) Model 5 Model 5 Model 95 ASME SI Units EP AP ES AS EP AP ES Model 5 Model 5 AS EP AP ES AS Model 95 The valve works as an automatic pressure releasing
More informationMPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
More informationSpare Parts. Small Single Seat Valve SP70860-GB
Spare Parts Small Single Seat Valve SP70860-GB1 2003-09 Stop Valve 12.7-19 mm 2 Reg.: 2003-05 Intro.: 2003-05 Stop Valve 12.7-19 mm Pos. Qty. Denomination 12.7 mm 19 mm Actuator, complete... 9612-9404-01
More informationProviding flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2.
e X L i n k exlink 7-pole / 6-pole + PE for Zone 1 and Zone 21 Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2. The exlink 7
More information26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
More informationSpares Catalogue. T: +44 (0) E: W: Engineering a better environment Filter Features 04-05
Engineering a better environment Spares Catalogue Filter Cartridges Filter Features 04-05 06-21 T: +44 (0) 1782 599454 E: sales@dustcheck.com W: www.dustcheck.com About Us Dustcheck is one of the UK s
More informationFlow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
More information3S 1 13,5 1/4 3013, /8 1/ ,2 3/8 3017, / ,3 1/2 4021,3
DIN 3015, Part 2 Components: Dimensions / Order Codes Clamp Body ød1 S 1 Clamp Body One clamp body is consisting of two clamp halves. Colour: reen Material code: PP Colour: Black Material code: PA (87
More informationIntroduction. Hydraulic Testers PPC Series. Hydraulic Testers of the PPC Series. D Diagtronics
Introduction Hydraulic Testers PPC Series Hydraulic Testers of the PPC Series The STAUFF measuring and test equipment of the PPC series are perfectly suited for measuring all relevant parameters in Depending
More informationISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
More informationMultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
More informationPNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationClamps with RUBBER BUSHING
Clamps with RUER USHING Order Codes p 34 Dimensions p 34 CLAMPS WITH RUER USHING Mounting example p 37 STANDARD SERIES CLAMPS WITH RUER USHING Order Codes PIPE CLAMPS AND RUER USHING MATERIAL (two clamp
More informationLB74G - EXCELON Modular System General purpose filter/regulator
LBG - EXCELON Modular System > Port size: /... / (ISO G/PFT) > Push to lock adjusting knob with optional tamper resistant accessory > Excelon design allows in-line installation or modular installation
More informationPNEUMATIC TUBING FITTING
2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes
More information97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
More informationHydraulic Tester PPC Series
Hydraulic Tester PPC Series Series Description The STAUFF measuring and test equipment of the PPC series are perfectly suited for measuring all relevant quantities in fluid engineering systems, including
More informationV GM C4500 C5500
Illustrated Parts List for VMAC System System V900099 2008-2007 GM C4500 C5500 LMM Duramax 6.6L Diesel without dual alternators System V900098 2007-2006 GM C4500 C5500 Duramax 6.6L Diesel without dual
More informationSCVA08, SCVA10, SCVA20 & SCVA32, 3/2 Solenoid actuated safety valve
SCV0, SCV0, SCV & SCV, / > > Port size: /4, /, /4 and (ISO G, NPT) > > Range of sizes - DN, 0, and > > Redundant valve assembly, pneumatic self monitoring with integrated safety silencer > > Ensures safe
More informationF250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
More informationLevel- and temperature sensor Nivotemp NT M-XP
Level- and temperature sensor Nivotemp NT M-XP Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored continuously. Here, modern factory automation requires
More informationOld documentation - Only for your information! Product is not available anymore!
Double solenoid valve Control and safety combination valve Servo pressure controller - / 7. Printed in Germany Rösler Druck Edition 0.08 Nr. 09 8 Technical description The DUNGS multiple actuator DMV-SE...
More informationHydraulic Quick Couplings General Purpose
Manual Sleeve, Unvalved Snap-tite H Series couplings have been proven by years of use on hydraulic applications. H Series is best suited for general purpose fluid applications where either single or double
More informationPA 152. Probe mounting adaptor (high temperature)
(high temperature) FEATURES» From the Vibro-Meter product line» For the external mounting of TQ proximity probes» Removable housing, with U-shaped retainer, that allows easier probe installation and gap
More informationSUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)
COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
More information10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationRMI Temperature control
RMI Temperature control 7 nominal diameters... hot and cold water, glycol water and heat transfer fluid circuits temperature control on injection presses Safe and quick locking A large number of locking
More informationAir Mask. Medium Pressure (3000 psi) NFPA Edition Compliant PARTS LIST
Air Mask PARTS LIST Medium Pressure (000 psi) NFPA - 00 Edition Compliant TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000 pressure demand facepiece NFPA Facepiece Components Facepiece
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More information37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications
JIC Prochem manufactures and supplies an extensive range of JIC Fittings and Adaptors in all configurations. 37 Stainless Steel Fittings Prochem 37 JIC Fittings and Adaptors provide a straightforward,
More informationANACONDA MULTIFLEX CONDUIT TYPE UI
ANACONDA MULTIFLEX CONDUIT TYPE UI Very robust, extremely flexible and corrosion resistant Multifl ex type UI is the stainless steel version of type UIG. Extremely fl exible and robust, this fully interlocked,
More information