All in One Kit Quik Strt Guide SDE-00/00 CONNECTING WITH OTHER DEVICES Lol PC Brodnd Modem Brodnd Router or HUB CH CH CH CH 9 0 G 9 0 ALARM RS- OUT G DC V If you do not use the Internet, just follow the steps elow: 0 upnp Port Forwrding ( in se your router supports it) 9-0 9 Port Forwrding using Free PC progrm 9-0 Mnul Port Forwrding (*:Refer to Router Guide in ) 9-0 * English-
CH CH CH CH CH CH CH 9 0 ALARM OUT RS 9 ALARM OUT RS G 9 0 DC V G Older VGA les or non-stndrd VGA les my not hve the proper pins to uto detet the VGA monitor when onneted to the DVR. This my use the video sreen to funtion improperly. Plese use the instrutions elow to set the DVR monitor output to VGA mode. CH Notifition CH DC V Connet the Video nd Audio Out onnetors to the monitor. Connet mouse to the USB port. For PC monitor, use the VGA onnetor for the onnetion. 0 TO CAMERA SIDE ONLY CH 9 G TO DVR SIDE ONLY CH DC V G 9 0 CH Connet the DC dptor. Connet the mer to the Cmer In port. Instlltion 0 ALARM OUT RS DC V G 9 0 Solution VGA VGA. Remote ontrol does not funtion s expeted.. The system menu my seem frozen nd the DVR uttons my not work. Your unit my experiene prolem when non-stndrd VGA le or VGA monitor is onneted to the DVR. Below re the symptoms you my experiene with your DVR.. Cmers will e in sequene mode on the monitor ontinuously. G Symptom. Connet the VGA monitor to the DVR using the VGA le.. Mke sure the DVR is powered ON.. Insert the tteries to the DVR remote ontrol. CH CH CH CH Connet the LAN le. The defult onnetion for use of the Internet is s follows: You n onnet USB HDD, USB memory or mouse to the USB port. 9 0 ALARM OUT RS G 9 0. Fe the remote ontrol towrds the DVR nd press the uttons on the remote ontrol in sequene elow. Mke sure to press the uttons quikly.. You should e le to see nd ontrol the DVR menu using your mouse onneted to the DVR. Press the remote ontrol uttons in the following sequene. FREEZE DC V G VIEW RETURN Brodnd Router or HUB Lol PC Brodnd Modem Connet the modem to the WAN port of the router nd onnet eh of the PC nd the set to the LAN port. English-
Strting Up - In Live mode, lik <Login> in the right-lik menu. Use the virtul keyord to enter the pssword (defult: ) in the PASSWORD input ox. Use the mouse to djust the time setting. Dte/Time/Lnguge Dte/Time/Lnguge Holidy Dte 0-0-0 YYYY-MM-DD Time 0:: Hours 0-0-0 0:0: Time Zone Time Syn. GMT Setup DST De First (Sun) 0 De First (Sun) 0 Lnguge English Login ID dmin Pssword To pply your setting lik the <> utton. ģģ Selet <Connetion Mode> in <Network> menu. All opertions n e ontrolled with the mouse. - ģģ Using Virtul Keyord. Use the diretion uttons ($%_+) to move to desired hrter nd press the [ENTER] utton.. Use the < > utton to erse the previous hrter.. Use the < > utton to toggle the letter se.. Complete your input nd when done, lik <> to lose the virtul keyord. 9 - For Port Forwrding Setting Sets the Connetion type to <Stti IP> nd enter the IP ddress. Clik the <> utton. Connetion Mode Connetion Protool Connetion Mode Bndwidth Stti IP Mps IP 9...00 Gtewy 9... Sunet Msk... 0 DNS Mnul... ` 9 0 - = q w e r t y u i o p [ ] \ Del s d f g h j k l ; Cps Lok z x v n m,. / Shift Spe Ctrl Press the [MENU] utton on the remote ontrol. Selet <Dte/Time/Lnguge> in <System> menu. If using DI- mnuftured y D-link IP ADDRESS:9...00/ GATEWAY: 9... / SUBNET MASK:...0 / ST DNS SERVER:... / ND DNS SERVER:... 9 - For up&p Setting Sets the Connetion type to <Dynmi IP>. Clik the <> utton. Connetion Mode Connetion Protool Connetion Mode Bndwidth Dynmi IP Mps IP 9...00 Gtewy 9... Sunet Msk... 0 DNS Mnul... Logout Return System Dte/Time/Lnguge Permission Mngement System Mngement Log Informtion English-
Re & Ply 0 Press the [MENU] utton on the remote ontrol. Use the left/right utton (_ +) to selet <Reord>. Reord menu is seleted. Use the up/down uttons ( ) to move to <Reording Shedule>, nd press [ENTER] utton. Set eh of the Reord Shedule options. To hnge the setting, set the hnnel then selet the time nd dte you when wnt to reord. Press the [ENTER] utton while the ells re seleted. The reord type will yle through <No Reording>- <Continuous>-<Event>-<Both(Cont&Evnt)>. The defult is s shown elow. Reording Shedule CH All 00 0 0 0 0 0 0 0 0 09 0 9 0 Sun Mon Tue Wed Thu Fri St Hol No Reording Continuous Event Apply to All CH Both(Cont&Evnt) - Selet desired dte in the lendr, nd desired timeline in the Time r, nd press the <Ply> utton if you wnt to wth the reorded video. Time Serh 0-0-0 0/0/0 00:0: Stndrd Motion V.Loss Shedule Et Go to First Overlpped Dt 00:0 All CAM 0 CAM 0 CAM 0 CAM 0 CAM 0 CAM 0 CAM 0 Ply Go to Lst List Return Zoom In Dt Zoom Out Previous/Next Pge The olored line indites types of the reording dt. If you wnt to ply time speifi dt, enter n ext time. - If you hve set the event reording, you n ply desired sene using the <Event Serh> funtion. Set desired dte in the lendr nd the result will e listed on the tle. Selet one you desired nd press the <Ply> utton. Event Serh CAM 0 0-0-0 Overlpped Dt List Go to First Go to Lst No. Dte/Time Preview Event 0:: ~ 0::9 Motion To hnge the reord qulity & resolution, selet <REC Qulity & Resolution>. If you hnge the setting of the resolution nd the remining rte, the remining ount shows eh ville resolution. 0/0/0 00:0: 00:9:0 ~ 00:0:0 Motion 00:0: ~ 00:0: Motion Previous/Next Pge Ply Return REC Qulity & Resolution Stndrd Event Remining ount : CIF(L) : CIF(M) : CIF(S) : CH Resolution Reord Rte Reord Qulity CIF(S) fps Level CIF(S) fps Level CIF(S) fps Level CIF(S) fps Level CIF(S) fps Level CIF(S) fps Level CIF(S) fps Level CIF(S) fps Level Previous/Next Pge You n hnge the ply speed or hnnel, or stop the plyk using the onsreen utton r. 0-0-0 0:0: SYSTEM RECORD SIZE POSSIBLE FPS CIF 0 NTSC CIF 0 0 CIF 0 0 OFF, ~0 CIF x PAL CIF 0 x CIF 0 x OFF, ~ REC In Live mode, lik <Serh> in the right-lik menu. English-
Router & Network Set Up The following is onfigurtion for the Internet onnetion. This is typil exmple. ĜĜ If you wnt to set port forwrding mnully, refer to Router Guide. - In se of Port Forwrding Setting Downlod the progrm. Instll it in your PC. Run <Simple Port Forwrding> (http://www.simpleportforwrding.om/downlod) 9... Brodnd Router or HUB Cle/ADSL Modem or Diret LAN (Fixed/Stti IP) Internet DDNS Server (www.smsungipolis.om) - Clik <()Do it now> in Chek List Type your router informtion. Lol PC 9...9 DVR 9...00 d Pth: <Network> <Connetion Mode> <Protool> HTTP: 0 / Port(TCP): 0~ Connetion Mode Connetion Protool Protool Type TCP If you n t find the ext router in the list, updte the router list or hoose similr router in the sme mnufturer. - Clik the ion for heking your router IP ddress. Port(TCP) 0 ~ Port(UDP) 000 ~ 0 Unist/Multist Unist Multist IP... TTL Weviewer Port 0 * Multi Browser Support : TCP Port 0~0, Weviewer Port 0 Clik <> for updting your router IP ddress. In se your router supports upnp Port Forwrding DDNS DDNS Site Server Nme Produt ID ipolis www.smsumgip... HOMEDVR Quik Connet Not Use Use DDNS Host Address http://www.smsungipolis.om/homedvr Type your router Usernme & Pssword. If you hven t hnged them, skip this proedure, for it provides defult vlue.. Selet <ipolis> for DDNS Site.. Type your set ID in <Produt ID> field. More speifi informtion in <ipolis DDNS Setting> in pge.. Selet <Use> in <Quik Connet> menu.. After finishing <ipolis DDNS Setting> in pge, you n onnet your DVR set with the ddress <http://www.smsungipolis.om/homedvr> English-
- Clik <()Do it now> in Chek List for hoosing the ports. ipolis DDNS Setting - Visit http://www.smsungipolis.om or 9 http://www.smsungipolis.o.kr nd lik <LOGIN>. Type your DVR network setting. IP Address : 9...00 Type : TCP Strt Port : 0 End Port : 0 - If you hve ID & PASSWORD, insert them. 9 Otherwise, lik <SIGN UP> for new ount. - After log in, register your set with your informtion. 9 d IP Address : 9...00 Type : TCP Strt Port : 0~ End Port : 0~ g e f - After registrtion, you n see the list s elow. 9 - After heking if the list is right, lik <()Do it now> for updting your router. - Selet <ipolis> nd fill Server Nme out with your 9 registrtion informtion. DDNS DDNS Site Server Nme Produt ID ipolis www.smsumgip... SDE00HOME Quik Connet Not Use Use DDNS Host Address http://www.smsungipolis.om/sde00home 9 - You n see <STATUS> hnged to <ON> in 0 minutes, if ll the network settings re right. English-
We Browsing Doule-lik the [Silverlight.pkg] ion to disply the Silverlight plug-in instlltion sreen s shown. 0 In the ddress r of We Browser, enter the Set IP. For the internl network, enter the Set Lol IP nd for the externl network, enter the DDNS ddress. * Refer to DDNS Host Address defined in DDNS Menu. Ex) http://www.smsungipolis.om/homedvr Clik [Continue] to strt instlling Silverlight plug-in. When done, you will see the sreen s elow. http://www.smsungipolis.om/homedvr ģģ If you don t use 0 for HTTP port, then you must dd port No in the DVR IP ddress you wnt to onnet. Ex) http port: 00 LAN : http://9...00:00 (When you onnet the set within Lol Network or know tht IP) WAN : http://www.smsungipolis.om/dvrhome:00 (When you onnet the set vi Externl Network) Internet Explorer If the popup window is not tivted, unlok the popup. If you first onnet to the PC, you will see messge s shown. Instll the suggested AtiveX ontrol. Clik [Close] to exit from the Silverlight plug-in instlltion sreen. If you first onnet to the PC, you will see messge s shown ove. Clik <Instll> to instll the suggested softwre. ģģ Chek Point If you wnt to use SDE-Series DVR We Viewer with Sfri Browser on M, plese refer to this user guide nd instll Multi Viewer with firmwre upgrde if neessry. Sfri on MAC. Brower versions ville: Sfri.. or lter version Silverlight:.0.0.0 or lter Clik [Clik now to Instll] to disply the instlltion sreen s shown.. Use we rowser to onnet to the DVR.. If Silverlight plug-in is lredy instlled, you will see the sreen s shown.. If this is the se, perform Step [TCP port & We Viewer port settings] elow.. If the sreen ove does not pper, hek if the DVR set is onneted properly with vlid IP ddress. English-
Connet to the We Viewer nd enter the user ID nd pssword. Defult ID: dmin, Pssword: For more informtion, refer to the user mnul. The defult pssword n e exposed to hking thred so it is reommended to hnge the pssword fter instlling the produt. Note tht the seurity nd other relted issues used y the unhnged pssword shll e responsile for the user. Using Smrtphone. Downlod ipolis moile to your Smrtphone. iphone : App Store, Android: Android Mrket. From the strt sreen of ipolis moile, tp <Devie List>. The Add Devie sreen ppers..x If you wnt to use (or more) DVR Sets, refer to the wesite. (http://www.smsungtv.om). Register the DVR to the ipolis moile. Monitoring SDE-00 DVR (DVR) SDE sries (CH) - Right lik the sreen or press the [MODE] on the remote ontrol. Refer to 0 in pge Refer to in pge In se of 0 ~, The lst No() is for moile viewer 0-0-0 0:0: 0-0-0 0:0: <The piture is tken from iphone> - When the lunher menu ppers, press the < > utton. Y ou n dd or modify the sreen trnsition intervl in Devie > Monitor menu. Selet <Dte/Time/Lnguge Dte/Time/Lnguge Setup> in <System> menu. If the DVR set is onneted to the Internet in norml network settings, you n set the DVR s urrent time in syn with the seleted <Time Server> regulrly if you selet to use <Time Server>. If you wnt to use the DST funtions, set it to ON. Dte/Time/Lnguge Dte/Time/Lnguge Dte Time Holidy 0-0-0 YYYY-MM-DD Synhroniztion Setup Use Synhroniztion 0:: Hours Time Time Server 0..0.0 Time Zone GMT+0:00 Fil Lst Syn Time Setup Not Used Time Syn. Use Ativte s Server De First (Sun) 0H De First (Sun) 0H DST Lnguge English English- ģģ Comptile Smrtphone This pplition is optimized for iphone OS.. Android v./. (Glxy S/S reommended) more informtion, refer to the user mnul. MM For (http://www.smsungtv.om)