Project Description: Automated Compilation of Semantically Rich BIM Models of Bridges Information Delivery Manual

Transcription

1 BIM Guideline Detailed Exchange Requirements Project SeeBridge for the Project Phase Inspection & Data Collection Date: Creator: Burcu Esen Barutcu Project : Automated Compilation of Semantically Rich BIM Models of Bridges Information Delivery Manual Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 1 von 160

2 Exchange Models : Exchange Model 1 : Exchange Model 2 : Exchange Model 3A : Exchange Model 3B : Exchange Model 4 The As-Built BIM model (EM-1) is imported from the construction stage of the bridge into the BMS and then is verified (task 2.1.1) by the inspector in order to create the 'Pre-Inspection BIM model'(em-3a). The EM-1 model contains full geometry of all bridge elements with the final As-Built location, alignment, dimensions, material properties, and preferably any data regarding material testing and quality issue tracking and reporting per element to be used during inspection and maintenance design. This model contains a collection of 3D solid objects modeled either as a) solid extrusions or b) boundary representations (BREP). Solid extrusions are preferred wherever possible. A full semantic building model of the bridge, including objects, properties and relationships. A full semantic building model of the bridge, including objects, properties and relationships. Note that the geometry is reduced to BREP. Contains the, objects, properties and relationships that represent all of the bridge elements and all of the identified defects. Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 2 von 160

3 00 Project 'Project'=Bridge maintenance and/or rehabilitation project. The main parameters are: Type of project (Construction, Maintenance, Rehabilitation, evaluation), Type of Permit needed (Building permit, Traffic arrangement permit, Construction permit, Other authorities permit), List of the structures included in the project, Start day, End day, Contractor, Bridge consultant/designer, Authority department in charge, List of site included in the project Property Group / Name Mapping / P2 Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 3 von 160

4 01-01 Site 'Site'=A geometrical definition of the site including representative coordinates and a polygon showing the site borders and defining its area. The site definition will include a list of all the structures included in the site (by their names). IfcSite.- Property Group / Name Mapping / P2 Location - Coordinates N,E,Z : Site Attributes from IDM - Linear Referencing : SeeBridge_Location.LinearReferencing The linear reference location of a bridge will composed of the following fields: Kilometer Referencing and Meter Referencing. The exact location of the structure on the roadway (or ramp) to which it belongs. The distance refers to the coordinate origins of the structure. If an inventory form for the structure exists, the number will be taken from the relevant section in the inventory form of the said structure, and will be written according to the above format. - Near street number : SeeBridge_Location.NearStreetNumber This item is valid only for urban areas where the road is not a part of the inter-city road network. - Road No. : SeeBridge_Location.RoadNumber The road (or ramp) number to which the structure belongs will be written in four digits. - Street name : SeeBridge_Location.StreetName Site ID Spatial Composition This item is valid only for urban areas where the road is not a part of the inter-city road network. : User Identity 'Site ID'=is normaly used in cases where more than one structure exist. e.g. Interchange. The Site ID format depends on the DOT. Can be plain text to be filled by the user. : Spatial Composition Related to='ifcproject' MAN X N X X X OPT? N??? MAN X N X X X OPT? N??? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 4 von 160

5 02-01 Bridge 'Bridge'= IfcBuilding.- Property Group / Name Mapping / P2 Bridge ID : User Identity 'ROAD-KKK+MMMM-AA/nn- Road Bridge' 'ROAD=Road/ramp no.' 'KKK=Kilometer point on the road' 'MMMM=Meter point' normally 0 to 999 but can be more than 1000m if due to changes in the Km on the road or road changes were done. 'AA=Width identifier' 'nn=substructure double-digit mark' Bridge Type - Bridge primary type : SeeBridge_BridgeType.BridgePrimaryType Enumerated set - Bridge secondary type : SeeBridge_BridgeType.BridgeSecondaryType Enumerated set (only for bridges where type is changed between spans) OPT?? N N N OPT?? N N N General Classification - Historic : SeeBridge_GeneralClassification.Historic Documentation describing whether the structure has historical value (= 'A structure with historical value') or not (= 'A structure without historical value'). - Primary classification : SeeBridge_GeneralClassification.PrimaryClassificati on A three digit English letter code, which will be chosen from the primary classification list in the key table in Appendix B of the Identification, Numbering and Marking of Bridges and Road Structures procedure. If the primary classification exists in the inventory form of the structure, the code will be taken from the relevant location from the inventory form of the said structure. OPT N N??? MAN N N X X X Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 5 von 160

6 Property Group / Name Mapping / P2 - Secondary classification : SeeBridge_GeneralClassification.SecondaryClassifi cation A three digit English letter code, which will be chosen from the secondary classification list in the key table in Appendix B of the Identification, Numbering and Marking of Bridges and Road Structures procedure. If the secondary classification exists in the inventory form of the structure, the code will be taken from the relevant location from the inventory form of the said structure. - Temporary : SeeBridge_GeneralClassification.Temporary Documentation describing whether the structure is a temporary structure (= 'A Temporary structure') or not (= 'Not a temporary structure'). - Toll : SeeBridge_GeneralClassification.Toll Documentation describing whether the road is a toll road (= 'yes') or not a toll road (= 'no'). MAN N N X X X OPT N N??? OPT N N??? Identification - Mark : SeeBridge_Identification.Mark 'ROAD-S-BRG-BNNNNNnn' 'ROAD=Road/ramp No.' 'S=Group classification' 'BRG=Main classification' 'B=Single digit build attribution' 'NNNNN=5 digit number identifier' 'nn=substructure double-digit mark' OPT? N??? The structure (infrastructure) identification mark will be composed of the following fields: Road/ramp No., Group classification, Main classification, Single digit build attribution, 5 digit number identifier, Substructure double-digit mark. The mark will be identical to the infrastructure number with the addition of the road number (in 4 digits). - Number : SeeBridge_Identification.Number 'S-BRG-BNNNNNnn' 'S=Group classification' 'BRG=Primary classification' 'B=Single digit establishment attribution' 'NNNNN=5 digit number identifier' 'nn=double digit sub-structure marking' - Site ID : SeeBridge_Identification.SiteID Related to Site='IfcSite' Ownership - Owner ID : SeeBridge_Ownership.OwnerID MAN X N X X X Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 6 von 160

7 Property Group / Name Mapping / P2 - Owner description : SeeBridge_Ownership.Owner of the authority that owns the structure. This information will be chosen from the list documented in "Guide for Documenting Bridges and Road Structures Data". MAN? N?? X - Owner name : SeeBridge_Ownership.OwnerName MAN X N X X X - Owner's agent name : SeeBridge_Ownership.OwnersAgentName OPT? N??? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 7 von 160

8 02-02 Bridge Axis 'Bridge Axis'= Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 8 von 160

9 02-03 Bridge Grid 'Bridge Grid'= A grid is a 2D rectangular or skewed grid that applies to a span (i.e. there is a separate grid for each span). The grids are related to the Span entities by IfcRelContainedInSpatialStructure, between IfcGrid and IfcSpace Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 9 von 160

10 03-01 Span 'Span'=A section of a bridge between lines of support. The IfcSpace representing the SPAN should be contained in the IfcBuilding representing the bridge (i.e. the ifcbuildingstorey is not needed). IfcSpace.- Property Group / Name Mapping / P2 Aggregated geometric properties - Deck area : SeeBridge_AggregatedGeometric.DeckAr ea MAN???? X - Nominal span length : SeeBridge_AggregatedGeometric.Nomin alspanlength Span ID Span type : User Identity A unique identification defined for each span in a Bridge (e.g. Span no. 1, Span No. 2 or Span A-B, Span B-C etc. ). - Span technology : SeeBridge_SpanType.SpanTechnology Enumerated set MAN???? X Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 10 von 160

11 04-01 Drainage 'Drainage'= IfcDistributionSystem.DRAINAGE Property Group / Name Mapping / P2 Bridge System ID : User Identity Bridge System Type Identification : Predefined Type Predefined Type='DRAINAGE' - : SeeBridge_Identification. A short description of the structure, its components and surroundings. MAN? N X X? Performance Indices - Availability index : SeeBridge_PerformanceIndices.AvailabilityIndex OPT N N N N? - Condition Index : SeeBridge_PerformanceIndices.ConditionIndex MAN N N N N X - Load rating Index : SeeBridge_PerformanceIndices.LoadRatingIndex OPT N N N N? - Other Index : SeeBridge_PerformanceIndices.OtherIndex OPT N N N N? - Reliability Index : SeeBridge_PerformanceIndices.ReliabilityIndex OPT N N N N? - Seismic Vulnerability Index : SeeBridge_PerformanceIndices.SeismicVulnerabilit yindex OPT N N N N? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 11 von 160

12 04-02 Lighting 'Lighting'= IfcDistributionSystem.LIGHTING Property Group / Name Mapping / P2 Bridge System ID : User Identity Bridge System Type Identification : Predefined Type Predefined Type='LIGHTING' - : SeeBridge_Identification. A short description of the structure, its components and surroundings. MAN? N X X? Performance Indices - Availability index : SeeBridge_PerformanceIndices.AvailabilityIndex OPT N N N N? - Condition Index : SeeBridge_PerformanceIndices.ConditionIndex MAN N N N N X - Load rating Index : SeeBridge_PerformanceIndices.LoadRatingIndex OPT N N N N? - Other Index : SeeBridge_PerformanceIndices.OtherIndex OPT N N N N? - Reliability Index : SeeBridge_PerformanceIndices.ReliabilityIndex OPT N N N N? - Seismic Vulnerability Index : SeeBridge_PerformanceIndices.SeismicVulnerabilit yindex OPT N N N N? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 12 von 160

13 04-03 Safety 'Safety'=This system contains all of the bridge elements that are part of the safety system. IfcBuildingSystem.USERDEFINED Property Group / Name Mapping / P2 Bridge System ID : User Identity Bridge System Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='SAFETY'. - : SeeBridge_Identification. A short description of the structure, its components and surroundings. MAN? N X X? Performance Indices - Availability index : SeeBridge_PerformanceIndices.AvailabilityIndex OPT N N N N? - Condition Index : SeeBridge_PerformanceIndices.ConditionIndex MAN N N N N X - Load rating Index : SeeBridge_PerformanceIndices.LoadRatingIndex OPT N N N N? - Other Index : SeeBridge_PerformanceIndices.OtherIndex OPT N N N N? - Reliability Index : SeeBridge_PerformanceIndices.ReliabilityIndex OPT N N N N? - Seismic Vulnerability Index : SeeBridge_PerformanceIndices.SeismicVulnerabilit yindex OPT N N N N? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 13 von 160

14 04-04 Signs 'Signs'= IfcBuildingSystem.USERDEFINED Property Group / Name Mapping / P2 Bridge System ID : User Identity Bridge System Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='SIGNS'. - : SeeBridge_Identification. A short description of the structure, its components and surroundings. MAN? N X X? Performance Indices - Availability index : SeeBridge_PerformanceIndices.AvailabilityIndex OPT N N N N? - Condition Index : SeeBridge_PerformanceIndices.ConditionIndex MAN N N N N X - Load rating Index : SeeBridge_PerformanceIndices.LoadRatingIndex OPT N N N N? - Other Index : SeeBridge_PerformanceIndices.OtherIndex OPT N N N N? - Reliability Index : SeeBridge_PerformanceIndices.ReliabilityIndex OPT N N N N? - Seismic Vulnerability Index : SeeBridge_PerformanceIndices.SeismicVulnerabilit yindex OPT N N N N? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 14 von 160

15 04-06 Substructure 'Substructure'= IfcBuildingSystem.USERDEFINED Property Group / Name Mapping / P2 Bridge System ID : User Identity Bridge System Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='SUBSTRUCTURE' - : SeeBridge_Identification. A short description of the structure, its components and surroundings. MAN? N X X? Performance Indices - Availability index : SeeBridge_PerformanceIndices.AvailabilityIndex OPT N N N N? - Condition Index : SeeBridge_PerformanceIndices.ConditionIndex MAN N N N N X - Load rating Index : SeeBridge_PerformanceIndices.LoadRatingIndex OPT N N N N? - Other Index : SeeBridge_PerformanceIndices.OtherIndex OPT N N N N? - Reliability Index : SeeBridge_PerformanceIndices.ReliabilityIndex OPT N N N N? - Seismic Vulnerability Index : SeeBridge_PerformanceIndices.SeismicVulnerabilit yindex OPT N N N N? Spatial Containment : Spatial Containment Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 15 von 160

16 04-07 Superstructure 'Superstructure'= IfcBuildingSystem.USERDEFINED Property Group / Name Mapping / P2 Bridge System ID : User Identity Bridge System Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='SUPERSTRUCTURE' - : SeeBridge_Identification. A short description of the structure, its components and surroundings. MAN? N X X? Performance Indices - Availability index : SeeBridge_PerformanceIndices.AvailabilityIndex OPT N N N N? - Condition Index : SeeBridge_PerformanceIndices.ConditionIndex MAN N N N N X - Load rating Index : SeeBridge_PerformanceIndices.LoadRatingIndex OPT N N N N? - Other Index : SeeBridge_PerformanceIndices.OtherIndex OPT N N N N? - Reliability Index : SeeBridge_PerformanceIndices.ReliabilityIndex OPT N N N N? - Seismic Vulnerability Index : SeeBridge_PerformanceIndices.SeismicVulnerabilit yindex OPT N N N N? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 16 von 160

17 04-08 Traffic 'Trafiic'= IfcBuildingSystem.USERDEFINED Property Group / Name Mapping / P2 Bridge System ID : User Identity Bridge System Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='TRAFFIC' - : SeeBridge_Identification. A short description of the structure, its components and surroundings. MAN? N X X? Performance Indices - Availability index : SeeBridge_PerformanceIndices.AvailabilityIndex OPT N N N N? - Condition Index : SeeBridge_PerformanceIndices.ConditionIndex MAN N N N N X - Load rating Index : SeeBridge_PerformanceIndices.LoadRatingIndex OPT N N N N? - Other Index : SeeBridge_PerformanceIndices.OtherIndex OPT N N N N? - Reliability Index : SeeBridge_PerformanceIndices.ReliabilityIndex OPT N N N N? - Seismic Vulnerability Index : SeeBridge_PerformanceIndices.SeismicVulnerabilit yindex OPT N N N N? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 17 von 160

18 04-09 Utilities 'Utilities'= IfcBuildingSystem.USERDEFINED Property Group / Name Mapping / P2 Bridge System ID : User Identity Bridge System Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='UTILITIES' - : SeeBridge_Identification. A short description of the structure, its components and surroundings. MAN? N X X? Performance Indices - Availability index : SeeBridge_PerformanceIndices.AvailabilityIndex OPT N N N N? - Condition Index : SeeBridge_PerformanceIndices.ConditionIndex OPT N N N N? - Load rating Index : SeeBridge_PerformanceIndices.LoadRatingIndex OPT N N N N? - Other Index : SeeBridge_PerformanceIndices.OtherIndex OPT N N N N? - Reliability Index : SeeBridge_PerformanceIndices.ReliabilityIndex OPT N N N N? - Seismic Vulnerability Index : SeeBridge_PerformanceIndices.SeismicVulnerabilit yindex OPT N N N N? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 18 von 160

19 05-01 Cable System 'Cable System'=A cable system supporting the structure aggregated from few single elements as 'Cable Anchor block', 'Cable hanger', 'Main Cable' etc. IfcElementAssembly.USERDEFINED Property Group / Name Mapping / P2 Assembly ID : User Identity Assembly Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='CABLESYSTEM' - : SeeBridge_Identification. Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 19 von 160

20 05-02 Deck System 'Bridge Deck'= Bridge deck system aggregated from few single elements including 'Slab', 'Girder', 'Edge beam' etc. IfcElementAssembly.USERDEFINED Property Group / Name Mapping / P2 Assembly ID : User Identity Assembly Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='DECKSYSTEM' - : SeeBridge_Identification. Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 20 von 160

21 05-03 Operation 'Operation'= IfcElementAssembly.USERDEFINED Property Group / Name Mapping / P2 Assembly ID : User Identity Assembly Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='OPERATION' - : SeeBridge_Identification. Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 21 von 160

22 05-04 Pier Assembly 'Pier Assembly'= A bridge pier aggregated from few single elements as 'Column/Pier', Pile cap', 'Pile', ' 'Cross head/capping beam', 'Bearing' etc. IfcElementAssembly.USERDEFINED Property Group / Name Mapping / P2 Assembly ID : User Identity Assembly Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='PIERASSEMBLY' - : SeeBridge_Identification. Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 22 von 160

23 05-05 Traffic Seperation 'Traffic Seperation'= IfcElementAssembly.USERDEFINED Property Group / Name Mapping / P2 Assembly ID : User Identity Assembly Type Identification : Predefined Type Predefined Type='USERDEFINED'; Type='TRAFFICSEPERATION' - : SeeBridge_Identification. Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 23 von 160

24 06-01 Abutment 'Abutment'=A structure built to support the vertical loads coming from the bridge deck and lateral earth pressure at the ends of a bridge. The abutment shape can vary from bridge to bridge and even between the bridge itself. The main properties connected with bridge maintenance are the abutment surface area and the volume. An Abutment can also be defined as an assembly. The main Abutment properties are: Abutment type (Cast In-Situ concrete Abutment, Precast concrete Abutment, Stub Abutment, Stub Abutment with cantilever Retaining Wall façade, Stub Abutment with Reinforced-Earth Wall façade, Embedded cantilever wall with or without Anchors, other*), Material, Geometry properties (Length, Height, Width). IfcBuildingElementProxy.USERDEFINED Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='USERDEFINED'; Type='ABUTMENT' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 24 von 160

25 Property Group / Name Mapping / P2 - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 25 von 160

26 06-02 Arch Spring 'Arch springing'= The element supporting the ends of an arch at the connection to the foundation. IfcBuildingElementProxy.USERDEFINED Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='USERDEFINED'; Type='ARCHSPRING' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 26 von 160

27 Property Group / Name Mapping / P2 - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 27 von 160

28 06-03 Arch Support(Piers) 'Arch supports'= the columns rising from an arch and supporting the bridge deck. IfcColumn.USERDEFINED Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='USERDEFINED'; Type='ARCHSUPPORT' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 28 von 160

29 Property Group / Name Mapping / P2 - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 29 von 160

30 06-04 Box Element 'Box element'=a bridge deck shaped as box element, e.g. segmental box girder bridge. Type = "PrimaryBoxGirder" IfcBeam.USERDEFINED Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='USERDEFINED'; Type='PRIMARYBOXGIRDER' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 30 von 160

31 Property Group / Name Mapping / P2 - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 31 von 160

32 06-05 Bracing 'Bracing'=A secondary supporting element intended to hold the Primary element and prevent lateral movement or buckling IfcMember.BRACE Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='BRACE' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 32 von 160

33 Property Group / Name Mapping / P2 Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 33 von 160

34 06-06 Cable Anchor Block 'Cable anchor block'=an element intended to anchor the main cables of a suspension bridge into the abutments or cable chambers. IfcBuildingElementProxy.USERDEFINED Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='USERDEFINED'; Type='CABLEANCHORBLOCK' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 34 von 160

35 Property Group / Name Mapping / P2 - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 35 von 160

36 06-07 Cable Hangers 'Cable hangers'=the elements connecting the hanging cables into the bridge deck/main cables. IfcMember.STRINGER Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='STRINGER' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 36 von 160

37 Property Group / Name Mapping / P2 Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 37 von 160

38 06-08 Cantilever 'Cantilever'=The outer part of the bridge deck slab extending as a cantilever outside of the outer girder. IfcBeam.- Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Geometry - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 38 von 160

39 Property Group / Name Mapping / P2 - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 39 von 160

40 06-09 Column/Pier 'Column/Pier'=A bridge upright support element for the bridge superstructure. IfcColumn.- Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Geometry - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 40 von 160

41 Property Group / Name Mapping / P2 - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 41 von 160

42 06-10 Cross Head/Capping Beam 'Cross Head/Capping Beam'=A transverse beam connecting the main bridge columns at a pier supporting line. IfcBeam.- Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Geometry - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 42 von 160

43 Property Group / Name Mapping / P2 - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 43 von 160

44 06-11 Deck Stiffener 'Deck Stiffener'=A longitudinal stiffener mainly used for stiffening the orthotropic bridge steel deck. IfcMember.STRUT Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='STRUT' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 44 von 160

45 Property Group / Name Mapping / P2 Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 45 von 160

46 06-12 Diaphragm 'Diaphragm'=A member that transfers loads to support and resists lateral forces, mainly used for Box sections bridge superstructure. In large bridges it is common to have openings inside the diaphragm enabling the passage of a person for maintenance. IfcBeam.USERDEFINED Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='USERDEFINED'; Type='DIAPHRAGM' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 46 von 160

47 Property Group / Name Mapping / P2 - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 47 von 160

48 06-13 Drainage Channel 'Drainage Channel'=Substructure drainage Channel intended to drain the surface area near the bridge or if lower road exists is part of the road drainage system. IfcPipeSegment.GUTTER Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='GUTTER' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 48 von 160

49 Property Group / Name Mapping / P2 Location - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 49 von 160

50 06-14 Edge Beam 'Edge Beam'=A beam supporting the bridge deck edge. IfcBeam.- Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Geometry - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 50 von 160

51 Property Group / Name Mapping / P2 - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 51 von 160

52 06-15 End Walls 'End Wall'=The closing wall at the upper back of the bridge Abutment (normally just below the deck expansion joint). IfcWall.- Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Geometry - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters - Start Cross section shape : SeeBridge_Geometry.StartCrossSectionShape Location Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 52 von 160

53 Property Group / Name Mapping / P2 - Global Coordinates - Orientation data Material(s) data What is the difference to Coordinates N,E,Z (Northing, Easting, Z-Elevation)? Within the local coordinate system of the Element to which it belongs - : SeeBridge_MaterialData. MAN???? X - Material ID : SeeBridge_MaterialData.MaterialID Nominal shape data - Length : SeeBridge_NominalShapeData.Length - Volume : SeeBridge_NominalShapeData.Volume OPT????? Legand: = Exchange Model 1; = Exchange Model 2; = Exchange Model 3A; = Exchange Model 3B; P2- Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 53 von 160

54 06-16 Girder 'Girder'=The main bridge deck girder is transferring the deck load to the supports. Girder type should preferably selected from a predefined list of girder types (e.g. AASHTO 1,2,3,4,5,6, U shape, I shape, Invert T, double T, Invert double T, Hollow Box, Bulb T, Rectangular, Other*), Girder material. IfcBeam.- Property Group / Name Mapping / P2 Aggregation - Assembly ID : SeeBridge_Aggregation.AssemblyID - Bridge System ID : SeeBridge_Aggregation.BridgeSystemID Single value each object can only belong to one system - Span ID : SeeBridge_Aggregation.SpanID 1:n Element ID : User Identity Element Type Geometry : Predefined Type Predefined Type='USERDEFINED'; Type='PRIMARYGIRDER' - Alignment curve/line : SeeBridge_Geometry.AlignmentCurveLine - BREP shape : SeeBridge_Geometry.BREPShape MAN??? X X - End Cross section ID : SeeBridge_Geometry.EndCrossSectionID - End Cross section parameters : SeeBridge_Geometry.EndCrossSectionParameters - End Cross section shape : SeeBridge_Geometry.EndCrossSectionShape - Start Cross section ID : SeeBridge_Geometry.StartCrossSectionID - Start Cross section parameters : SeeBridge_Geometry.StartCrossSectionParameters Powered by BIM*Q, the BIM Requirements and Quality Management Database by AEC3 Deutschland GmbH Seite 54 von 160