HOLY ANGEL UNIVERSITY College of Engineering and Architecture Department of Architecture
|
|
- Garry Singleton
- 5 years ago
- Views:
Transcription
1 HOLY ANGEL UNIVERSITY College of Engineering and Architecture Department of Architecture Course Title: Computer-aided Design and Drafting for Architecture 2 Subject Code:ARCADD2 Course Credit: Lecture- 1 unit;laboratory-6 units Year Level: 4 th Pre-requisites: ARCADD 1 Course Description: An advanced computer-aided architectural modeling and rendering using current software Course Calendar: 1 st sem
2 ARCADD 2 PRELIM MIDTERM FINAL I. INTRODUCTION. Differentiate two-dimensional and three-dimensional drawings II. USER INTERFACE Modeling Views Visual styles UCS and UCS2 Viewports III. 3D MASSING AND EDITING Extrude, extrude with taper, extrude path, extrude path with taper 3D Solid and 3D surface Union and Subtract Solid editing Revolve Fillet IV. APPLICATION OF 3D MASSING: 3D modeling of a simple structure using extrude and other editing commands V. AUTOCAD ARCHITECTURE Walls Doors Windows Door and Window Assembly Roof Stairs and handrail Generate elevation and section VI. APPLICATION OF AUTOCAD ARCHITECTURE AEC COMMANDS: 3D modeling of a simple structure using extrude and other editing commands VII. 3D STUDIO MAX RENDERING Inserting cad files through Import and File Link Manager Materials Camera Light Rendering VII. AUTOCAD RENDERING Materials Camera Light Rendering References: A. Books Autodesk, Inc., AutoCAD 2000 User Guide, Autodesk Press, 2000
3 Bethune, James D., Engineering Graphics with AutoCAD, Prentice-Hall, Inc., 1995 Goetch, David L., Technical Drawing and Design, Delmar Publishers, Inc., 1986 Giachino, J. W., Drafting and Graphics, American Technical Society, 1969 Mitchell, William, Computer-Aided Architectural Design, New York, Van Nostrand Reinhold, c1977 Jefferis, Allan, AUTOCAD 2002 for Architecture, Australia, Thomson Learning, c2002 Port, Stanley, Computer-aided Design for Construction: A Guide for Engineers, Architects and Draftsmen, London, Granada, c1984 Saka, Tuna, Autocad for Architecture, c2002 B. Student-oriented Websites AutoCAD On-Line Tutor AutoCAD Tutorial Home Page FBE Online Learning AutoCAD 3D Café s Free Tutorials AutoCAD C. Studio Equipment 1. Computer Work Stations Class size (1 computer:1 student ratio) Ideal 20 students Maximum 40 students 2. One (1) Plotter 3. One (1) Scanner 4. One (1) Printer Course Requirements 1) 3 to 6 Minor Plates (during Development Phases) 2) 3 Major Plates (Major Exams) 5. One (1) LCD Projector
4 Grading System Legend: (All Items in Percent) CSA Class Standing Average for All Performance Items (Cumulative) P Prelim Examination Score M Midterm Examination Score F Final Examination Score MEA Major Exam Average PCA Prelim Computed Average MCA Midterm Computed Average FCA Final Computed Average Note: For purposes of illustration, the sharing between CSA and MEA is shown below as 70% and 30% respectively, when computing the Computed Average for each Grading Period. Depending on the grading parameters set for a subject the sharing may be 65%-35%, 60%-40% or other possible combinations. Computation of Prelim Computed Average (PCA) CSA = MEA = P PCA = (70%)(CSA) + (30%)(MEA) Computation of Midterm Computed Average (MCA) CSA = MEA = MCA = (70%)(CSA) + (30%)(MEA) Computation of Final Computed Average (FCA)
5 CSA = MEA = FCA = (70%)(CSA) + (30%)(MEA) Note: A student's Computed Average is a consolidation of Class Standing Percent Average and Major Exam Percent Average.
6 Course Policies Maximum Allowable Absences: 7 (held 2 times a week)
CAD for Industry. Course Design hour Lecture, 4 hours Lab per week Transfer Status
CAD for Industry Course Design 2005-2006 Course Information Organization Eastern Arizona College Division ITE Course Number DRF 263 Title CAD for Industry Credits 3 Developed by Dee Lauritzen Lecture/Lab
More informationAutoCAD 2013 Tutorial - Second Level: 3D Modeling
AutoCAD 2013 Tutorial - Second Level: 3D Modeling Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to
More informationUniversity of Engineering and Technology, Taxila Department of Civil Engineering
University of Engineering and Technology, Taxila Department of Civil Engineering Course Title: Pre-requisite(s): Computer Applications (HU-210) Theory + Lab None Credit Hours: 2 + 2 Contact Hours: 2 +
More informationTutorial Second Level
AutoCAD 2018 Tutorial Second Level 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationSchool of Construction and the Environment Program: Interior Design INTD 2260 Revit for Interior Design
School of Construction and the Environment Program: Interior Design INTD 2260 Revit for Interior Design Start : 5 January 2016 End : 22 March 2016 Total Hours: 36 Total Weeks: 12 Term/Level: Winter Course
More informationAutodesk Architectural Desktop Real-World Workflow Methodology
11/30/2005-5:00 pm - 6:30 pm Room:N. Hemispheres (Salon E1) (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida Autodesk Architectural Desktop Real-World Workflow Methodology Edward Goldberg,
More informationTEACHING & ASSESSMENT (T & A) PLAN
1 UoN/AA-003/FORM-QTLMS/V2/2017 College of: Engineering & Architecture TEACHING & ASSESSMENT (T & A) PLAN Department/School of: Architecture and Interior Design Semester: SUMMER Academic Year 2016 / 2017
More informationModeling Basics for 3D Printing Using AutoCAD
Modeling Basics for 3D Printing Using AutoCAD William Work CAD Manager Join us on Twitter: #AU2014 Who am I? Architect CAD Manager I am an architect and CAD manager with a firm of more than three hundred
More informationAutodesk AutoCAD In Mechanical Engineering Design Edward Locke
Autodesk AutoCAD In Mechanical Engineering Design Edward Locke Engineering Department Santa Ana College Mechanical Engineering Drafting Essentials Working Drawings: Orthographic Projection Views (multi-view,
More informationAutoCAD for Engineers and Designers, 21st Edition. (3D and Advanced)
AutoCAD 2015 for Engineers and Designers, 21st Edition (3D and Advanced) CADCIM Technologies 525 St. Andrews Drive Schererville, IN 46375, USA (www.cadcim.com) Contributing Author Sham Tickoo Professor
More informationVirginia Western Community College ARC 221 Architectural CAD Applications Software I
Virginia Western Community College ARC 221 Architectural CAD Applications Software I Prerequisites CAD 241 Course Description Teaches the principles and techniques of architectural drawing practices through
More informationTechnical Education Services
AutoCAD 3D Drawing and Modeling Official Training Guide Course Length: 3 days AutoCAD 3D Drawing and Modeling introduces students who are proficient with the 2D commands in the AutoCAD software to the
More informationCOMPUTER AIDED ARCHITECTURAL GRAPHICS FFD 201/Fall 2013 HAND OUT 1 : INTRODUCTION TO 3D
COMPUTER AIDED ARCHITECTURAL GRAPHICS FFD 201/Fall 2013 INSTRUCTORS E-MAIL ADDRESS OFFICE HOURS Özgür Genca ozgurgenca@gmail.com part time Tuba Doğu tubadogu@gmail.com part time Şebnem Yanç Demirkan sebnem.demirkan@gmail.com
More informationThe following learning resources are pre-requisites to help prepare you in supporting your students through this course.
Introduction to CAD: From 2D to 3D Modeling Instructor Guide This instructor guide is a comprehensive tool for facilitating this course in the classroom. Prepare to teach this course by thoroughly reviewing
More informationRevit Architecture Syllabus Total duration: 80 hours (Theory 40 Hours + Lab 40 Hours)
Faculty Start Date End Date No of Students Revit Architecture Syllabus Total duration: 80 hours (Theory 40 Hours + Lab 40 Hours) Introduction About BIM Introduction to Autodesk Revit Architecture Revit
More informationIntroduction to AutoCAD 2010
Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 18 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso3d.dwt. 3. Make new
More informationSTATE COLLEGE OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MFGT INSTRUMENTATION AND CONTROLS
STATE COLLEGE OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MFGT 220 - INSTRUMENTATION AND CONTROLS Prepared By: Daniel Miller Revised By: Daniel Miller 4/5/12 CANINO SCHOOL OF ENGINEERING
More informationITT Technical Institute. DT2630 3D Modeling and Visualization Onsite and Online Course SYLLABUS
ITT Technical Institute DT2630 3D Modeling and Visualization Onsite and Online Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s) and/or Corequisite(s):
More informationEach trainee receives the official 260 page courseware as part of attending this course.
Level 1 NURBS modelling with Rhino Course Outline This course is for anyone new, or nearly new, to Rhino. Recognised as THE introductory course for Rhino, all trainees receive an Official Certificate on
More informationTEACHING & ASSESSMENT PLAN
TEACHING & ASSESSMENT PLAN. College : College of Engineering & Architecture 2. Department : Department of Architecture. Semester : FALL 206 / 207 4. Course Code : ARCH-206 5. Course Name : DIGITAL GRAPHICS
More informationEDUCATIONAL REND LAKE COLLEGE CAD INTRODUCTION TO COMPUTER-AIDED DRAFTING DWG#10 - IN-CLASS 3D ACTIVITY REVISED: FALL 2010
INSTRUCTOR: THOMAS ARPASI REND LAKE COLLEGE CAD 1201-51 INTRODUCTION TO COMPUTER-AIDED DRAFTING DWG#10 - IN-CLASS 3D ACTIVITY 1 CAD 1201-51 Drawing 10 - In-Class 3D Modeling Goal: Quickly model a chess
More informationLnJ SEP CAD 222. SAUL1 l.,vl.l.l:i...i:;library AUTHOR: DATED: DATE --- SAULT STE. MARIE SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ON. COURSE OUTLINE COURSE TITLE: COURSE CODE: PROGRAM: SEMESTER: AUTHOR: DATE: APPLIED AUTOCAD II Architectural & Civil Technology 3 Daniel
More informationAutodesk REVIT (Architecture) Mastering
Autodesk REVIT (Architecture) Mastering Training details DESCRIPTION Revit software is specifically built for Building Information Modeling (BIM), empowering design and construction professionals to bring
More informationSoftware Development & Education Center. Revit 2013
Software Development & Education Center Revit 2013 (Architecture BIM MEP Structure Family Editor) Autodesk Revit Architecture Essential Objective The primary objective of this course is to teach students
More informationInformation Technology
Information Technology Output Devices Lecture 6 Presented by Miss N. Nembhard Output Devices Receives an electrical signal and produces data or information. The purpose of an output device is to translate
More informationAutodesk Revit Architecture Training Course Outlines
Autodesk Revit Architecture Training Course Outlines Description Duration 8 Days (5 classroom + 3 online) The aim of the Autodesk Revit Architecture Professional course is to teach delegates the principles
More informationPREREQUISITE:Individualized Educational Plan with this component. REQUIRED MATERIALS: notebook, pencil, calculator, agenda book
#936 MATH 10 SMALL GROUP GRADE: 10 LEVEL: Small Group CREDITS: 10 PREREQUISITE:Individualized Educational Plan with this component BASIC TEXT: Algebra, Prentice Hall Informal Geometry, Prentice Hall, 1992
More informationNEW YORK CITY COLLEGE OF TECHNOLOGY/CUNY Computer Systems Technology Department
NEW YORK CITY COLLEGE OF TECHNOLOGY/CUNY Computer Systems Technology Department COURSE: CST1201 Programming Fundamentals (2 class hours, 2 lab hours, 3 credits) Course Description: This course is an intensive
More informationWelcome to CS 4/57101 Computer Graphics
Welcome to CS 4/57101 Computer Graphics Goal: The goal of this course is to provide an introduction to the theory and practice of computer graphics. The course will assume a good background in programming
More informationARCH_ _COMP-PRAC REVIT SYLLABUS
ARCH_4605-5605_COMP-PRAC REVIT SYLLABUS The Revit Portion of Computational Practice is divided into 3-Parts: Part 1 Classes 01-06 [RE&EM] Revit Essentials & Existing Models Part 2 Classes 07-12 [RF&AC]
More informationA Hands-on Project approach to Teaching Solid Modeling
Paper ID #13155 A Hands-on Project approach to Teaching Solid Modeling Prof. Randy Shih, Oregon Institute of Technology Randy Shih is a Professor in the Manufacturing and Mechanical Engineering and Technology
More informationHOLY ANGEL UNIVERSITY COLLEGE OF INFORMATION AND COMMUNICATIONS TECHNOLOGY COMPILER THEORY COURSE SYLLABUS
HOLY ANGEL UNIVERSITY COLLEGE OF INFORMATION AND COMMUNICATIONS TECHNOLOGY COMPILER THEORY COURSE SYLLABUS Code : 6COMTHEORY Prerequisite : 6AMATA Credit : 3 s (3 hours LEC) Year Level: 3 rd year Degree
More informationHow to Render Architectural Desktop 2005 Objects
How to Render Architectural Desktop 2005 Objects The procedure for assigning AccuRender materials to Architectural Desktop objects and layers is nearly identical to that of AutoCAD. The difference in assigning
More informationAC 29 th December, 2016 Item No. 4.3
Change in Regulations Sem X and Scheme of Examinations of Sem VIII relating to admission and examination as per Credit and Grading System Bachelor of Architecture program AC 29 th December, 2016 Item No.
More informationIntroduction to AutoCAD Chapter 15 Exercise 1
Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 15 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso3d.dwt. 3. Open the
More informationDesign Integration Using Autodesk Revit 2015
Design Integration Using Autodesk Revit 2015 Architecture, Structure and MEP Multimedia Disc Daniel John Stine CSI, CDT SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com
More informationSTATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE GMMD 111 VIDEO EDITING
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE GMMD 111 VIDEO EDITING Prepared By: Morgan Elliott THE STATE UNIVERSITY OF NEW YORK AT CANTON CANINO SCHOOL OF ENGINEERING
More informationAUTOCAD 3D. This course incorporates the features, commands, and techniques necessary to create, edit, and plot a 3D technical drawing in AutoCAD.
AUTOCAD 3D Course www.gteceducation.com.sg This course incorporates the features, commands, and techniques necessary to create, edit, and plot a 3D technical drawing in AutoCAD. Entry Requirement Course
More informationCourse Administration
CS 246: Software Abstraction and Specification (Software Engineering Section) Lecture 1 Course Administration http://www.student.cs.uwaterloo.ca/~cs247 Calendar Description CS 247 Software Engineering
More informationEXERCISE 6: AEC OBJECTS
EXERCISE 6: AEC OBJECTS ASSIGNMENT: In this exercise you will create a small pavilion using AEC extended objects, Doors, Windows and Stairs LEARNING OBJECTIVES: Modeling with AEC Objects Using Door, Windows,
More informationa division of softpro
a division of softpro & Revit Training Institute advanced 2d & 3d diploma 100% Job Assistance Become a Certified 3D Max & Revit Professional 3D MAX Interior Adobe Photoshop Module 1 2D Created by industry
More informationAutodesk Revit Architecture Certification Preparation
John Herridge Autodesk, Inc. Glenn Katz Autodesk, Inc. AB3585 Autodesk Certification signifies your experience and expertise to employers and clients around the world and, as such, is a very powerful asset
More information3D AUTOCAD. The view we ve been working in is a top or plan view. From this view even a 3D drawing will appear 2D.
3D AUTOCAD Thus far, we ve looked at tools and operations in 2D with work completed on only the X- and Y- axes. The axes symbol has been present on our screen but we haven t had much use for it. The view
More informationYork University AS/AK/ITEC INTRODUCTION TO DATA STRUCTURES. Midterm Sample I. Examiner: S. Chen Duration: One Hour and 30 Minutes
York University AS/AK/ITEC 2620 3.0 INTRODUCTION TO DATA STRUCTURES Midterm Sample I Examiner: S. Chen Duration: One Hour and 30 Minutes This exam is closed textbook(s) and closed notes. Use of any electronic
More informationASCENT - Center for Technical Knowledge AutoCAD D Drawing and Modeling Revision 1.0 Prepared and produced by: ASCENT Center for Technical Knowle
AutoCAD 2011 3D Drawing and Modeling Student Guide Cover Page Revision 1.0 June 2010 ASCENT - Center for Technical Knowledge AutoCAD 2011 3D Drawing and Modeling Revision 1.0 Prepared and produced by:
More informationCommercial Design Using Autodesk Revit Architecture 2013
Commercial Design Using Autodesk Revit Architecture 2013 Includes video instruction Daniel John Stine CSI, CDT Multimedia DVD SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks.
More informationBS375 AUDITING. This sample unit outline is provided by CHC for prospective and current students to assist with unit selection.
BS375 AUDITING This sample unit outline is provided by CHC for prospective and current students to assist with unit selection. Elements of this outline which may change with subsequent offerings of the
More informationCapabilities and Limitations of Autodesk Revit in a Construction Technology Course
Capabilities and Limitations of Autodesk Revit in a Construction Technology Course 55 Capabilities and Limitations of Autodesk Revit in a Construction Technology Course Mike Christenson University of Minnesota
More informationAs formerly seen on Suite101.com. Written by Jon Jonas of Archinature
As formerly seen on Suite101.com. Written by Jon Jonas of Archinature Before we begin with the main reason you re here today, please take a moment and visit http://www.cadonline.com/cadpoll/cadpoll.html
More informationAutodesk 3ds Max Design 2013 Fundamentals
Autodesk 3ds Max Design 2013 Fundamentals Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed
More informationBIM Diploma content ( included courses) : Training course Course Levels Duration Outputs Revi t Architecture
What is BIM? Autodesk BIM is an intelligent model-based process that helps owners and service providers achieve business results by enabling more accurate, accessible, and actionable insight throughout
More informationCourse Information Package
Course Information Package PLANNING FORM FOR AN EDUCATIONAL MODULE (to be completed by the teacher) Programme of Studies: Name of the module: Target group: Level of the unit: Entrance requirements: Number
More informationAdvanced SolidWorks course curriculum development 04/24/2017 Group: F
Advanced SolidWorks course curriculum development Group: F Naser Alhajri ( Client Contact ) Yousef Alhaddad (Project Manager ) Mohammad Alfadhli ( Secretary/ Document manger ) Muhammad Alhajri ( Web Designer)
More informationAutodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 2]
11/29/2006-5:00 pm - 6:30 pm Room:Marcello - 4404 (MSD Campus) Autodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 2] Daniel Banach - MasterGraphics MA25-3 See MA24-2: Autodesk
More informationCourse Name: Computer Graphics - 2 Course Code: IT332
Course Name: Computer Graphics - 2 Course Code: IT332 I. Basic Course Information Major or minor element of program:major Department offering the course:information Technology Department Academic level:400
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS 3D MODELING & ANIMATION VPT 2165
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS 3D MODELING & ANIMATION VPT 2165 Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 0.0 Revised: Fall 2017 Catalog Course Description A study of advanced
More informationCOMPUTER AIDED ARCHITECTURAL GRAPHICS
COMPUTER AIDED ARCHITECTURAL GRAPHICS FFD 201/Fall 2011 HANDOUT 2/ 3DS MAX-INTRODUCTION 3ds Max is software which can be use for modelling, animation and rendering. It is used in lots of design areas such
More informationCRP 5851 GRAPHIC COMMUNICATION SPRING 2015 COURSE SYLLABUS
CRP 5851 GRAPHIC COMMUNICATION SPRING 2015 COURSE SYLLABUS Image Source: http://media.photobucket.com/image/an%20image%20says%20a%20thousand%20 words/foolz3h/athousandwords.jpg When & Where: Fridays: 3:00
More informationCourse Name: Computer Networks-1 Course Code: IT222
Course Name: Computer Networks-1 Course Code: IT222 I. Basic Course Information Major or minor element of program: General Department offering the course: Information Technology Department Academic level:
More informationChief Architect X10 New Feature List
PRODUCTIVITY Saved Plan Views. Create and save multiple plan views (similar to saved cameras). Each view retains Layer Set, Annotation Set and Active Defaults. Open multiple Plan Views in Windows or Tabs,
More informationAdvanced Training Lighting Design With LucidShape
Advanced Training Lighting Design With LucidShape 1: Topics FF reflectors with MF and PS systems Low/high beam headlamps, Signal lamps Multi filament sources Projector Type Headlamps with PCS (Poly Curve
More informationLRA Designs Video Tutorial Index
VectorWorks Drafting: 1a 2d Drafting and Editing Part 1 31:00 The basics of Drawing, Editing and Navigation 1b 2d Drafting and Editing Part 2 27:00 The basics of Drawing, Editing and Navigation 2a 3d Drafting
More informationCourse Name: Computer Vision Course Code: IT444
Course Name: Computer Vision Course Code: IT444 I. Basic Course Information Major or minor element of program: Major Department offering the course:information Technology Department Academic level:400
More informationResidential Design Using Autodesk Revit 2015
Residential Design Using Autodesk Revit 2015 Includes video instruction Multimedia Disc Daniel John Stine CSI, CDT SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Includes
More informationCourse Name: Database Design Course Code: IS414
Course Name: Database Design Course Code: IS414 I. Basic Course Information Major or minor element of program: Both Major Minor Department offering the course: Information Systems Department Academic level:
More informationSolid Modeling: Part 1
Solid Modeling: Part 1 Basics of Revolving, Extruding, and Boolean Operations Revolving Exercise: Stepped Shaft Start AutoCAD and use the solid.dwt template file to create a new drawing. Create the top
More informationUsing 3D AutoCAD Surfaces to Create Composite Solids
Using 3D AutoCAD Surfaces to Create Composite Solids J.D. Mather Pennsylvania College of Technology GD211-2P This class explores the creation of 3D surfaces used in creating composite solids. Many solid
More informationBellevue Community College Summer 2009 Interior Design 194 SPECIAL TOPIC: SKETCHUP
Class Session: TTh 6:00 pm 8:00 pm Credit Hours: Two (2) Location: A262 Door Code: 349499 (through A254) Instructor: Greg Wharton Office: by appointment Hours: by appointment or email email: gwharton@gmail.com
More informationIncrease your awareness of the wide range of computer applications available for computer modeling and visualization.
Course Title: Computer Modeling of the Environment Course No: EVDS 602 Instructors: Dr. Richard M. Levy, rmlevy@ucalgary.ca Session: Fall 2014 Time: Fall Block Week, October 14-17, 9:00-17:00 Location:
More informationEE3315 Internet Technology EE3315 Internet Technology Overview Slide 1
EE3315 Internet Technology http://www.cityu.edu.hk/ug/current/course/ee3315.htm EE3315 Internet Technology Overview Slide 1 Course Aim This course aims to provide students with the knowledge of key protocols
More informationSimply Rhino Rhino for Architecture
Simply Rhino Rhino for Architecture This course, completely revised for Rhino 6, is geared to architectural professionals including architects, structural engineers, urban designers, building envelope
More informationSOLIDWORKS Parametric Modeling with SDC. Covers material found on the CSWA exam. Randy H. Shih Paul J. Schilling
Parametric Modeling with SOLIDWORKS 2015 Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF
More informationGetting Started with Onshape
Getting Started with Onshape First Edition Elise Moss, Authorized Onshape Partner SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationPhiladelphia University FACULTY OF ADMINISTRATIVE & FINANCIAL SCIENCES Department of Accounting 0000 Semester
Philadelphia University FACULTY OF ADMINISTRATIVE & FINANCIAL SCIENCES Department of Accounting 0000 Semester000000 Course Syllabus Course Title: Accounting Information Systems Course Level: fourth year
More informationCS 3270 Mobile Development for Android Syllabus
General Information Semester: Fall 2016 Textbook: Required: Android 6 for Programmers An App-Driven Approach, 3e, Deitel, Deitel and Wald, Prentice Hall, 978-0-13-428936-6. This book is also available
More informationPELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS LINUX SYSTEM ADMINISTRATION CSIT 2411
PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS LINUX SYSTEM ADMINISTRATION CSIT 2411 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Spring 2010 Catalog Course Description: A study
More informationDesign. Design. Associate Degrees. Certificates. Contact Information. Full-Time Faculty. Associate in Arts Degrees. Certificate of Achievement
Associate Degrees Associate in Arts Degrees Architectural Computer-Aided Computer-Aided and Engineering Technology Mechanical Students may earn one of the above-named associate degrees by completing a
More informationComputer-Aided Design / Computer-Aided Manufacturing MEE430,KIM,ME,NIU
Computer-Aided Design / Computer-Aided Manufacturing Computer-Aided Design and Computer-Aided Manufacturing and Applications with Pro/E, 4 th Edition, Meung J. Kim., 2013, LuLu Publishing Co. Reference
More informationCourse Name: Information and Computers Networks Security Course Code: IT423
Course Name: Information and Computers Networks Security Course Code: IT423 I. Basic Course Information Major or minor element of program: Major Department offering the course:information Technology Department
More informationAutodesk Inventor 2019 and Engineering Graphics
Autodesk Inventor 2019 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
More informationENGINEERING, APPLIED ENGINEERING, and TECHNOLOGY
ENGINEERING, APPLIED ENGINEERING, and TECHNOLOGY The Technology Education program offers courses in the visual communications, manufacturing and construction, and transportation technology areas. Each
More informationNOTE: This syllabus is subject to change during the semester. Please check this syllabus on a regular basis for any updates.
Course Syllabus NOTE: This syllabus is subject to change during the semester. Please check this syllabus on a regular basis for any updates. Department : Emergency Services Course Title : Firefighter Certification
More informationParametric Modeling with SOLIDWORKS 2017
Parametric Modeling with SOLIDWORKS 2017 NEW Contains a new chapter on 3D printing Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationImporting and Exporting FilesChapter1:
Importing and Exporting FilesChapter1: Chapter 1 You can use Revit Architecture to import and export various file types, including AutoCAD and AutoCAD Architecture DWG files to use as design aids. You
More informationParametric Modeling with SolidWorks
Parametric Modeling with SolidWorks 2012 LEGO MINDSTORMS NXT Assembly Project Included Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationHow to deal with custom objects in Bentley Applications
AEC Integration Lab @ Georgia Tech How to deal with custom objects in Bentley Applications Ph.D. student: Jin-Kook Lee Professor: Charles M. Eastman Design Computing, College of Architecture Georgia Institute
More informationCovers Autodesk Advance Steel fundamentals, so you become quickly productive with the software
Covers Autodesk Advance Steel fundamentals, so you become quickly productive with the software Autodesk Advance Steel 2017 www.autodesk.com new Autodesk Advance Steel users. It is recommended that you
More informationInterior Design Using Autodesk Revit 2014 Introduction to Building Information Modeling for Interior Designers
Interior Design Using Autodesk Revit 2014 Introduction to Building Information Modeling for Interior Designers Aaron R. Hansen ASID, CDT Daniel John Stine CSI, CDT Multimedia Disc SDC P U B L I C AT I
More informationParametric Modeling with. Autodesk Fusion 360. First Edition. Randy H. Shih SDC. Better Textbooks. Lower Prices.
Parametric Modeling with Autodesk Fusion 360 First Edition Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationGenerative Shape Design
Generative Shape Design Copyright DASSAULT SYSTEMES 2002 1 Exercise 60 min. The Knob In this exercise you will have the opportunity to model an appliance Knob starting from an empty model. You will create
More informationJEFFERSON COLLEGE COURSE SYLLABUS CIS155 INTRODUCTION TO COMPUTER PROGRAMMING. 3 Credit Hours. Prepared by: David McNair
JEFFERSON COLLEGE COURSE SYLLABUS CIS155 INTRODUCTION TO COMPUTER PROGRAMMING 3 Credit Hours Prepared by: David McNair Revised by: September, 2005 October 20, 2014 Chris DeGeare, M.Ed., Division Chair,
More informationInformation and Communication Technology BCcampus Online Collaborative Program
Information and Communication Technology BCcampus Online Collaborative Program Computer Support Technician Certificate (CST) Computer Hardware ICT 102 Course Outline COURSE IMPLEMENTATION DATE: September
More informationCS Systems Qualifying Exam 2016
CS Systems Qualifying Exam 2016 Important Dates May 6 : Registration ends. Registration instructions are below. When you register, you must declare the three exams you plan to take. May 23 : Exams. Candidates
More informationRendering Techniques in 3D AutoCAD, Part 2. David Cohn Independent Consultant
Rendering Techniques in 3D AutoCAD, Part 2 David Cohn Independent Consultant 1 Evaluation Forms Please remember to fill out your evaluation form This is session GD115 2 And, please silence your cell phone.
More informationInterior Design Using Autodesk Revit 2017
Interior Design Using Autodesk Revit 2017 Introduction to Building Information Modeling for Interior Designers Daniel John Stine CSI, CDT Aaron R. Hansen ASID, CDT SDC P U B L I C AT I O N S Better Textbooks.
More informationTECHNOLOGY DEPARTMENT TECHNICAL & COMPUTER AIDED DRAWING
TECHNOLOGY DEPARTMENT AUTOMOTIVE TECHNOLOGY TRANSPORTATION SYSTEMS (1208) sem This course is an overview of Aerospace, Land and Marine Transportation systems. Vehicle types, engine variations, and auxiliary
More informationDesign Integration Using Autodesk Revit 2020
Daniel John Stine AIA, CSI, CDT Design Integration Using Autodesk Revit 2020 Architecture, Structure and MEP SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE
More informationB. Subject-specific skills B1. Problem solving skills: Supply the student with the ability to solve different problems related to the topics
Zarqa University Faculty: Information Technology Department: Computer Science Course title: Programming LAB 1 (1501111) Instructor: Lecture s time: Semester: Office Hours: Course description: This introductory
More informationWilliam Paterson University of New Jersey Department of Computer Science College of Science and Health Course Outline
William Paterson University of New Jersey Department of Computer Science College of Science and Health Course Outline I. Course Title: CS 280 Computer and Assembler Language 3 credits II. III. IV. Course
More informationAutocad Tutorials Manual 2018 Building Design
Autocad Tutorials Manual 2018 Building Design Beginners Autodesk AutoCAD 2018 Tutorial Video Training via - Video based Autodesk AutoCAD 2018 Tutorial. using the massively popular computer aided design
More information