NX Collaboration and Supplier Exchange. Andy Attfield, Siemens PLM
|
|
- Mariah O’Neal’
- 5 years ago
- Views:
Transcription
1 NX Collaboration and Supplier Exchange Andy Attfield, Siemens PLM
2 Agenda Three Challenges The JT Solution A Day in the Life of AeroKabins GmbH. The Hybrid Solution A Day in the Life of TurboFan-tastic Inc. Adding ACIS, AP242, DXF, 3MF, IFC Questions? Page 2
3 Agenda Three Challenges The JT Solution A Day in the Life of AeroKabins GmbH. The Hybrid Solution A Day in the Life of TurboFan-tastic Inc. Adding ACIS, AP242, DXF, 3MF, IFC Questions? Page 3
4 Digital Thread Challenge #1: Extending the Reach of the Digital Twin Ready to combine and Re-use Product Design Data from Multiple Systems Collaboration Capable? Different Teams and Locations New Partners and Suppliers Different in-house systems Transition Dynamic? Acquisition and Merger Value Legacy System Data Ownership Carry over and Design Re-use Discipline Receptive? Linked Engineering Disciplines Operational Environment Customer Environment XYZ s Assembly Environment CAD from Acquisition Re-use from previous program Format Neutral Supplier NX 12 Latest Design Page 4
5 Digital Thread Challenge #2: Most Effective Collaboration with the Model Based Enterprise Able to Publish the Model Based Definition to the Model Based Enterprise CAD Supply Chain Planning Procurement Manufacturing Test Logistics Documentation Marketing Shipping Service etc Few CAD users and many, Many More non-cad users Page 5
6 Digital Thread Challenge #3: Standardizing on Format, Process and Content Quality Data Ownership Examples of Industry Focus Group Participation Design Data Obsolescence Interdisciplinary Re-use Risk and Cost Resilience Regulatory and Contractual Compliance Lifecycle Support and Product Liability GAAG Automotive OEM forum sharing collaboration experiences and priorities Page 6
7 Agenda Three Challenges The JT Solution A Day in the Life of AeroKabins GmbH. The Hybrid Solution A Day in the Life of TurboFan-tastic Inc. Adding ACIS, AP242, DXF, 3MF, IFC Questions? Page 7
8 Industry Trend: ISO 14306:2017 JT Based Ecosystem Environment JT Partner JT Teamcenter NX Formats Enterprise JT MultiCAD JT Inspector Standard JT Page 8
9 Industry Trend: Standards Based Collaboration using AP242XML + JT Daimler surpassed 20 million JT files under management and 80% of components have been approved for JT based collaboration*. Source: Daimler 2018 PLM Connections Renault #2 PDM Priority: Collaboration with partner companies based on AP242 xml + JT. Source: GAAG 2018 Nissan #1 PDM Priority: Collaboration with partner companies based on AP242 xml + JT. Source GAAG 2018 Page 9
10 A Day in the Life: AeroKabins GmbH. Page 10 1 OEM needs new seat design. Provide Context using JT 6 Environment JT Packaging study and suggest modifications Enterprise JT 2 Ensure JT is the Design Authority for Model Based Definition Teamcenter NX Formats MultiCAD JT Inspector 5 Ensure JT is the Design Authority for Model Based Definition 3 Partner JT Supplier bid then import context to design new seat 4 Publish new seat as JT Model Based Definition Standard JT
11 Ensure JT is the Design Authority The Model Based Definition Digitalization Challenge #3: Standardization US DoD MIL-STD-31000A AIA LOTAR EN/NAS 9300 Page 11
12 JT Inspector and JT Inspector Design Authority Inside Teamcenter Visualization or from Command Line for Automation JT Segment JT Content JT Integrity JT Comparison Visual Environment What have I got? Is it correct? Same as CAD? Where s the problem? Structure Tessellation PMI Metadata XT B-rep Summary and per node results Levels (LODs), parameters, triangles, line segments PMI types and quantities of each and semantic properties Quantity and display of properties Type, Bodies, regions, shells, faces count Data structures and associations Ordered series of Parasolid integrity checks on XT Fidelity check graphical presentation, semantic representation and associations Compares CAD point cloud against JT, 66 SASIG tests Visual Report of Inspection results Inspect, highlight and fly-to in Teamcenter Visualization On screen Visual Reporting XML Results for Process Automation HTML Reports to store as Quality Records Mass Props Parasolid Computes JT properties Reports stored CAD properties Compares CAD properties against JT Display Point Cloud exceptions as JT points Page 12
13 Example: JT Inspector Design Authority to Audit Geometry Parasolid CAD Integrity Geometric Properties SASIG Tests Point Cloud Automated command line and Integrated with Teamcenter Visualization Page 13
14 JT PMI Validation Capability Complete to Current Standards Validation Capability Adopts Common ProSTEP JT Implementer and STEP CAxIF Recommended Practices JT Integrity Matches schema Data Structure JT Integrity Complete and Correct Association Validity Graphical Fidelity Centroid of Display JT Integrity Polyline Length Semantic Fidelity Unicode Representation JT Integrity PMI Counts PMI per part PMI per JT type Integrity PMI per Modelview Associated/Attached Area or length of associated JT Integrity and attached geometry Modelviews Modelview Count PMI per JT Modelview Integrity Modelview Transformation Modelview Centroids * JT Inspector Design Authority with TcVis and NX * JT Inspector Design Authority with TcVis 11.5 and NX June 2019 Page 14
15 Agenda Three Challenges The JT Solution A Day in the Life of AeroKabins GmbH. The Hybrid Solution A Day in the Life of TurboFan-tastic Inc. Adding ACIS, AP242, DXF, 3MF, IFC Questions? Page 15
16 Siemens PLM Capability Interoperability Driven by Standards MODEL-BASED DEFINITION MODEL-BASED SYSTEM ENGINEERING SIMULATION PMI: JT, ASME Y14.41, ISO TDP: JT-PDF, MIL-STD-31000A LOTAR: JT, STEP AP242, NAS 9300 NX ReqIf SysML FMI LMS Example: 3MF Connects Additive Manufacturing Open packaging convention file representing the solid model as Cartesian mesh 3MF is integrated with NX, Solid Edge JT Translator and JT2GO Siemens PLM is a core member of the 3MF Consortium TEAMCENTER Example: IFC CMM: ASME Y14.5 ANSI BIM: IFC NX MANUFACTURING ISO/PAS 16739:2013 AEC Building Information Model Incorporate Environmental and Manufacturing considerations into your design Place your equipment into its CONNECTworking environment Meet BIM archive legislation JT-3MF STL NX ISA95 B2MLL OPC DA SIMATIC IT MES MANUFACTURING & METROLOGY ADDITIVE MES Page 16
17 Breadth of Interoperability Formats with NX and/or JT and more to come ACIS Solid works Creo IGES Catia V4 AP 203 Teamcenter Catia V5 AP 214 NX vrml AP 242 Formats JT Inventor NX only STL DXF/ DWG Import/export IFC Revit NX or JT 3MF Aveva SP3D Navis works JT only Page 17
18 A Day in the Life: TurboFan-tastic GmbH. 2 1 Import Partner Model Based Definition Import Prototype Geometry AP 214 AP 203 IGES ACIS Solid works Teamcenter NX Creo Catia V4 Catia V5 VRML 5 Confirm Quality of Suppliers JT Geometry 3 Import Manufacturing Environment AP 242 STL Formats JT Import/export Inventor Revit 6 Export Rig for BIM compliance 4 Export 3DPrint Prototype DXF/ DWG 3MF Aveva SP3D Navis works IFC 7 Publish Design Authority AP242XML plus JT Page 18
19 A Day in the Life: TurboFan-tastic GmbH. Digitalization Challenge #1: Extending the Reach Import Prototype Geometry 1 ACIS Fuel Nozzle in ACIS based system Open Fuel Nozzle.SAT in NX 11 Fuel_Nozzle_Sat NX 11 Assembly Page 19
20 NX 11 Adds Bidirectional ACIS Support Import or File Open Export or Save As Solids Surface Wireframe Or entire part Standard Options Heal during Import Simplify B-surfaces to Analytics where appropriate Optimize by Removing Redundant Topology Stitch Trimmed Surfaces Select ACIS version Page 20
21 A Day in the Life: TurboFan-tastic GmbH. Digitalization Challenge #1: Extending the Reach Import STEP AP242 into NX 11 onwards 2 Import Partner Model Based Definition AP 242 Round Trip NX PMI for Metrology (Component Measuring) etc. Page 21
22 Is STEP AP242 Format Ready for your Collaboration and Archive? NX Fully Supports AP242 Edition 1 Current Definition Tessellated PMI (Graphical Display) All 4 Semantic PMI types Section Views Validation Properties for PMI STEP Implementer Forum Work on Robustness of Definition Edition 2 Brings Placeholder PMI for correct display Edition 3 Targeting Additional Semantic types Reviewing Proposal for Full Dimension Support Seeking Common Interpretation of PMI Views Reviewing Proposal for PMI View Validation Not yet supported by CATIA, 3DExperience or Creo Page 22
23 JT from Multiple Sources - NX MultiCAD JT has benefits in NX Loads JT content based on Customer Defaults Lightweight load -> Precise geometry Synchronises Assembly structure during load Creates & populates reference sets according to load options Allows associative references (eg wave link) Page 23 Semantic PMI Representations
24 A Day in the Life: TurboFan-tastic GmbH. Digitalization Challenge #1: Extending the Reach Identify DWG in NX Wizard Import NX Assembly 3 Import Manufacturing Environment DXF/ DWG Page 24
25 NX 11 Adds 3D and Architectural Support to the DXF Wizard Use the Wizard to Select a 2D or 3D Workflow 3D Pre-processing Introduce a Scale Factor and Move Origin Repair and Improve Solid Geometry Interpret Blocks either as Parts or Groups 3D Data Interpretation 3D Faces, Architecture Data, Mass Elements, Mesh Objects as Lightweight Facet Bodies (JT facets)* XLine as Datum Axes Uniform thickness 2D Polyline as Bounded Plane Uniform 2D Polyline with thickness as Extrude Page 25 NX 12 Adds Option to Import Mesh as Convergent Bodies!
26 A Day in the Life: TurboFan-tastic GmbH. Digitalization Challenge #3: Standardization Flywheel as JT Translate to 3MF 4 Export 3DPrint Prototype 3MF Page 26
27 3D Printing from JT via 3MF Interoperability using Open Standards Siemens PLM is a core member of the 3MF Consortium NX has a suite of Additive Manufacturing Capabilities JT users can also export to 3MF Capability Mesh Analysis detects non-solid bodies Option to re-mesh precise XT-brep geometry to suit Additive Process individual Parts or entire Assembly as a single object Retains JT Properties (metadata) Retains JT Attributes (colour) JT 3MF 3D Print software print Page 27
28 A Day in the Life: TurboFan-tastic GmbH. Digitalization Challenge #1: Extending the Reach Source Catia Blade Supplied as JT JT Inspector: Catia Point Cloud Catia V5 5 Confirm Quality of Suppliers Geometry JT Design Authority imported to NX for Analysis and Composite Design Page 28
29 JT Fidelity CAD Point Cloud Against JT Surfaces and Edges Capability What it means? What if there are problems? CAD source point cloud Parasolid compares with Precise Geometry in the JT User Defined Error Threshold Precise Geometric Surfaces in JT match original CAD Surfaces to User Specified Tolerance Red Points displayed are Not OK Deviation Reported Decide significance Confirm accuracy of point against original CAD geometry and determine process fault Page 29
30 A Day in the Life: TurboFan-tastic GmbH. Digitalization Challenge #3: Standardization NX Turbine on Rig Export via JT to IFC and display in Revit 6 Export Rig for BIM compliance IFC Industry Foundation Classes (IFC) is a Building Information Model (BIM) compliant format Page 30
31 JT Bidirectional Translator for Industry Foundation Classes (IFC) Building Information Model (BIM) Digitalization for the Construction Sector JT to IFC [ISO 16739:2013] IFC to JT [ISO 14306:2012] IFC 2X3 and IFC 4 Full JT Translator Configuration Control IFC Project and elements represented as JT Assembly hierarchy Solids and Surfaces translated to XT b-rep Curves and Points as Wireframe Facets stored as JT Tessellation Attributes as JT Properties IFC Page 31
32 Broad Collaboration using AEC and Plant Formats via JT AEC Formats JT Workflows for AEC Industry Combine AEC and NX using JT Collaborate with NX equipment in its environment using JT Address BIM requirements and legislation Plant Formats JT Workflows Plant and Marine Industry Tessellation for MultiCAD space reservation Mockup NX equipment with JT Plant data Analyze Geometry and Metadata JT Bidirectional Translator for IFC JT Translator for Revit JT Translator for Navisworks JT Translator for Aveva JT Translator for SmartPlant3D JT Translator for P&ID Page 32
33 A Day in the Life: TurboFan-tastic GmbH. Digitalization Challenge #2: Collaborating with the Model Based Enterprise 7 Publish Design Authority AP242XML plus JT Page 33
34 JT is the Published Design for NX NX Parametric Features Constraints Construction History (Designers IP) Parasolid same ISO 14306:2012 ISO 14306:2017 JT Parasolid Precise Geometry:- Parasolid. An exact copy and archive of the NX data including B-spline, Analytic and Convergent shapes PMI schema PMI Product Manufacturing Information:- Same PLMXML PMI schema used Attributes Tessellation Sketch Geometry copy same Attributes Tessellation Levels 1 of Detail 2 (LODS) Attributes:- Metadata copy Levels of Detail:- Exactly the same representation, optionally a copy with additional LODs Smart Topology Table:- fast access between Tessellation and Geometry Page 34
35 Reference Sets Defined in NX used in JT Reference Sets NXJT Visualization Create Geometric Alternatives or Process Information within a Part Assign NX Part Bodies to Reference Sets NX shares Duplicate Geometry in XT Bodies Typical JT Workflows: Design Alternatives Simplified Geometry for CAE Different geometry for different consumer Different Manufacturing Steps JT Options: Exclude or Include Body in JT by Reference Set Retain Reference Set Assignments of each Body Same Geometry Sharing (same XT) Load by reference set Display by reference set Page 35
36 Welds and Symbolic Threads Defined in NX used in JT NX Weld Representation in JT NX Symbolic Threads in JT Option to Include Welds Consistently stored as PMI with associated Geometry Feature Names retained in PMI name Lightweight Spot Weld representation Semantic Thread information stored as PMI Properties for downstream Manufacturing Associativity to Geometry Retained Page 36
37 Reflection Transforms Defined in NX used in JT Capabilities Create a new component instance that is reflected Reflection status preserved by JT Value Quickly generate the opposite side of product by generating new instances of existing components Eliminates the need to create new parts or datasets to generate the opposite side of product Page 37 back
38 Disclosed Modelviews Defined in NX used in JT NX Author geometry and PMI/Modelviews Publish model views to Teamcenter JT Translator Store published model views in JT Retain Disclosure status Teamcenter Author and manage packages Finish out non-geometric metadata Teamcenter Visualization Collect and organize modelviews Review and print package content Export package for offline (JTinPDF) NX CAD Author and publish views NX Save Publish JT Tc Dataset Teamcenter Managing views & packages Teamcenter Vis Making packages Teamcenter Vis/JT2Go Review/printing packages JT Data Management Pipeline Page 38
39 A Day in the Life: TurboFan-tastic GmbH. 2 1 Import Partner Model Based Definition Import Prototype Geometry AP 214 AP 203 IGES ACIS Solid works Teamcenter NX Creo Catia V4 Catia V5 VRML 5 Confirm Quality of Suppliers JT Geometry 3 Import Manufacturing Environment AP 242 STL Formats JT Import/export Inventor Revit 6 Export Rig for BIM compliance 4 Export 3DPrint Prototype DXF/ DWG 3MF Aveva SP3D Navis works IFC 7 Publish Design Authority AP242XML plus JT Page 39
40 Agenda Three Challenges The JT Solution A Day in the Life of AeroKabins GmbH. The Hybrid Solution A Day in the Life of TurboFan-tastic Inc. Adding ACIS, AP242, DXF, 3MF, IFC Questions? Page 40
41 Andy Attfield IC Product Management DF PL TO OT IO Realize innovation. Page 41
Data Exchange for Digitalization and the Model Based Enterprise Andy Attfield, Siemens PLM
Data Exchange for Digitalization and the Model Based Enterprise Andy Attfield, Siemens PLM Agenda Three Digitalization Challenges Exchange Format Choices A Day in the Life of TurboFan-tastic Gmbh Exchange
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Andy Attfield, Siemens PLM Unrestricted Responding to Industry Trends Open Standards to address Process Complexity Standard CaX formats
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse , G. Wahu
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse 16.10.2018, G. Wahu ABOUT CORETECHNOLOGIE CT is the leading supplier of CAD interoperability software solutions n More than 15 years of
More informationCAD Comparison and Related Technology For Enhanced Digital Workflows
CAD Comparison and Related Technology For Enhanced Digital Workflows Thursday, November 16, 2017 Annalise Suzuki Director of Technology & Engagement Elysium Company Intro 30+ Years of CAD Expertise Strong
More informationFeature and Topology Detection
Feature and Topology Detection Greater possibilities with Capvidia extension and PARTsolutions Cadenas Industry Forum February 5th, 2015 Thomas Tillmann Capvidia GmbH Agenda Company Overview Application
More informationJTOpen and JT2Go. Mike Zink Senior Product Mgr. Siemens PLM Software
JTOpen and JT2Go Mike Zink Senior Product Mgr. What is JT JT is an industry focused, high-performance, lightweight, flexible file format for capturing and repurposing 3D data that enables collaboration,
More informationTest Suite for the CAD work package of the STEP AP242 Benchmark #2
Test Suite for the CAD work package of the STEP AP242 Benchmark #2 February 2016 October 2016 April 15th, 2016 Contacts Kevin Le Tutour Boost Conseil 30 rue de Miromesnil 75008 Paris /France kevin.letutour@boost-conseil.com
More information3D Visualization. Requirements Document. LOTAR International, Visualization Working Group ABSTRACT
3D Visualization Requirements Document LOTAR International, Visualization Working Group ABSTRACT The purpose of this document is to provide the list of requirements and their associated priorities related
More informationELYSIUM - Global Interoperability Provider
ELYSIUM - Global Interoperability Provider Enabling the Digital Thread James Martin Director of Business Development NSRP Digital Shipbuilding June 2015 Digital Thread, Tapestry, etc. The digital thread
More information6th JT Application Benchmark SHORT REPORT
ProSTEP ivip/vda JT Application Benchmark 6th JT Application Benchmark SHORT REPORT JT Application Benchmark TABLE OF CONTENTS Contents Table of Contents 3 Disclaimer 4 Copyright 4 1 Introduction 5 2 Approach
More informationAFNeT STEP AP242 Benchmark
e AFNeT STEP AP242 Benchmark Test report for the STEP AP242 Benchmark #1 Short Report September 2015 Preamble AFNeT mission is to promote the use of digital technologies in the extended enterprise. The
More informationIntroduction to ANSYS DesignModeler
Lecture 7 CAD Connections 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 CAD Connections What will you learn from this presentation: Geometry Import
More informationConvergent Modeling and Reverse Engineering
Convergent Modeling and Reverse Engineering 25 October 2017 Realize innovation. Tod Parrella NX Design Product Management Product Engineering Solutions tod.parrella@siemens.com Realize innovation. Siemens
More information7th JT Application Benchmark SHORT REPORT
ProSTEP ivip/vda 7th SHORT REPORT TABLE OF CONTENTS Contents Table of Contents 3 Disclaimer 4 Copyright 4 1 Introduction 5 2 Approach 5 2.1 Four Steps 5 2.2 Building Blocks 6 2.3 Documentation 6 2.4 Criteria
More informationCT CoreTechnologie 3D_Evolution Release Note 4.0 SP0
New 3D_Evolution 4.0 version 1. 3D_Evolution 4.0 presents a totally new graphic interface: - Easy to use, - Faster access to tools and commands, - Streamlined interface design, - Larger graphical window,
More informationSpaceClaim Professional The Natural 3D Design System. Advanced Technology
SpaceClaim Professional The Natural 3D Design System SpaceClaim Professional is the 3D productivity tool for engineers who contribute to the design and manufacture of mechanical products across a broad
More informationCAD INTEROPERABILITY SOFTWARE SUITE
CAD INTEROPERABILITY SOFTWARE SUITE 1 3D_Evolution Conversion Engine is today s leading MCAD collaboration suite. Designed for a seamless, integrated process, it is the ideal enhancement for your PLM environment.
More informationDesign smarter with powerful, easy-to-use 3D CAD solutions
Creo Parametric Essentials Packages Design smarter with powerful, easy-to-use 3D CAD solutions PTC s 3D CAD product design solution, Creo Parametric, gives you the right tools to achieve the highest quality
More informationTest Suite for the CAx Implementor Forum Round 30J
Test Suite for the CAx Implementor Forum Round 30J March September 2012 Release 1.0 June 14, 2012 Jochen Boy ProSTEP ivip Association Dolivostraße 11 64293 Darmstadt / Germany jochen.boy@prostep.com Contacts
More informationVPI. Update for PLM Seed Grant and Associated Work. Virtual Product Integration. Nathan Hartman Christoph Hoffmann
Update for PLM Seed Grant and Associated Work Nathan Hartman Christoph Hoffmann Adrian Lim, Andrew Gunselman, Mark Potrzebowski, Adam Shelton Original Project Objectives A case study to identify geometric
More informationPTC CREO. ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks. PTC Creo Essentials Packages
PTC CREO PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more products in less time,
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse. Presentation by DASSAULT SYSTEMES
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Presentation by DASSAULT SYSTEMES CAD functional capabilities supported by the STEP AP242 interface 3DEXPERIENCE 3D geometry 3D Product
More informationCAD INTEROPERABILITY SOFTWARE SUITE
CAD INTEROPERABILITY SOFTWARE SUITE 1 3D_Evolution Conversion Engine is today s leading MCAD collaboration suite. Designed for a seamless, integrated process, it is the ideal enhancement for your PLM environment.
More informationTetra4D Enrich. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Enrich
Tetra4D Enrich Version 2018 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Enrich Tetra4D Enrich 2018 Release Notes 1 Table of Contents Version 2018... 3 Definition
More informationCATIA V5R21 - FACT SHEET
CATIA V5R21 - FACT SHEET Introduction What s New at a Glance Overview Detailed Description INTRODUCTION CATIA V5 is the leading solution for product success. It addresses all manufacturing organizations;
More informationKick Off meeting teleconference
AP242 Benchmark #2 1 Kick Off meeting teleconference CAD test cases - Workpackage n 1 16 th of February 2016 Report v1 benchmark.ap242.org Attendees 2 n Jochen Boy n Chris Fellows n Jacques Heinisch n
More informationAFNeT STEP AP242 Benchmark
e AFNeT STEP AP242 Benchmark Test report for the STEP AP242 Benchmark #2 CAD test cases - Short Report v1.1 June 2017 Related websites AP242 project: AP242 Benchmark: PDM-IF: CAx-IF: http://www.ap242.org/
More informationNX MACH design solutions
Siemens PLM Software MACH design solutions Power, flexibility and control improve design productivity Benefits Boosts product design efficiency Accelerates mechanical design processes Improves collaboration
More informationSolidView 2016 Features List
SolidView 2016 Features List SolidView/Lite Features View, measure and modify SVD files from SolidView/Pro. View STL, SFX, SolidWorks, OBJ, AMF and VRML CAD files. SolidView Features View, measure, modify
More informationTetra4D Automate. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Automate
Tetra4D Automate Version 2018 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Automate Tetra4D Automate 2018 Release Notes 1 Table of Contents Version 2018... 3
More informationWhat's New in NX 11 for Design Engineering
What's New in NX 11 for Design Engineering NX 11 for Design Productivity Convergent Modeling Many industries use scanned 3D data as part of their design processes. If you have worked with this data in
More informationSolidView Features List
SolidView 2012.0 Features List SolidView/Lite Features View, measure and modify SVD fi les from SolidView/Pro. View STL, SFX, SolidWorks and VRML CAD fi les. SolidView Features View, measure, modify and
More informationJWG16 - Formats for visualization and other derived forms of product data Joint ISO/TC 184/SC 4 - ISO/IEC JTC 1/SC 24 - ISO/TC 171/SC 2 WG
JWG16 - Formats for visualization and other derived forms of product data Joint ISO/TC 184/SC 4 - ISO/IEC JTC 1/SC 24 - ISO/TC 171/SC 2 WG https://isotc.iso.org/livelink/livelink?func=ll&objid=19599172&obja
More informationSolidView Features List
SolidView 2012.1 Features List SolidView/Lite Features View, measure and modify SVD fi les from SolidView/Pro. View STL, SFX, SolidWorks and VRML CAD fi les. SolidView Features View, measure, modify and
More informationProposal for ISO/IEC SC24 Technical Report:
Proposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata And X3D Printing and Scanning Hyokwang Lee and Don Brutzman Web3D Korea Chapter
More informationCREO ENGINEER PACKAGES. 3D CAD solutions optimized for your product development tasks
CREO ENGINEER PACKAGES 3D CAD solutions optimized for your product development tasks From the smallest product design firm to the largest, manufacturing organizations are under constant pressure to develop
More informationCreo Elements/ Pro Advanced SE
Creo Elements/ Pro Advanced SE Create Innovative Designs Faster and More Efficiently Formerly Pro/ENGINEER The Creo Elements/Pro Advanced SE (Standard Edition) Package adds powerful data management capabilities
More informationNX Mach Series Industrial Design
Mach Series Industrial Design Features Provides tools for creating, modifying and analyzing free form and aesthetically pleasing surfaces and shapes Allows for conceptual models as well as for producing
More informationAll-in-One Software Solution for Metal Additive Manufacturing
All-in-One Software Solution for Metal Additive Manufacturing What Makes 3DXpert Ideal for Metal Additive Manufacturing? Specialized Requirements Call for Specialized Software Metal Additive Manufacturing
More informationCATIA, Q-Checker, xcompare and neutral formats in the context of 3D Master / MBD. Arnd Feye
CATIA, Q-Checker, xcompare and neutral formats in the context of 3D Master / MBD Arnd Feye What does 3D Master / MBD mean? Single Source of Truth: Harmonization of the view on a product and its function
More informationWhite Paper. PROSTEP AG Dolivostrasse Darmstadt Germany Phone Fax
White Paper 3D Formats in the Field of Engineering a Comparison When the source system is not available, too costly to propagate widely, or full model fidelity is not required, neutral 3D formats are essential
More informationCAD INTEROPERABILITY SOFTWARE SUITE.
CAD INTEROPERABILITY SOFTWARE SUITE www.coretechnologie.com 1 2 TABLE OF CONTENTS CONVERSION 4 FEATURE BASED 6 SIMPLIFIER 8 EDM 10 FEM TOOLS 12 MODELING 14 ADVANCED ANALYZER 16 3 CONVERSION FEATURE BASED
More informationI-deas NX Series Master Modeler Foundation capabilities for feature-based variational solid modeling
I-deas Series Master Modeler Foundation capabilities for feature-based variational solid modeling fact sheet www.ugs.com Summary I-deas Series Master Modeler is the core design module for the I-deas product
More informationWebinar. 2016: The Year of 3D PDF - Why we still need client based 3D PDF conversion January 21st, PROSTEP, Inc.
Webinar 2016: The Year of 3D PDF - Why we still need client based 3D PDF conversion January 21st, 2016 2016 PROSTEP, Inc. No part of this presentation may be reproduced or transmitted in any form for any
More informationSimcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
More informationChoosing the Right Data Formats to Share Product Content
Technology, M. Halpern, R. Knox Research Note 11 August 2003 Choosing the Right Data Formats to Share Product Content The array of open and proprietary formats for exchanging technical data for product
More informationCADdoctor. CADdoctor EX. Product Configuration/Requirements. Product Configuration. Standard Function. Import & Export Options.
CADdoctor Product Configuration/Requirements Version: EX 8.0 Released date: May 8, 2018 Version: SX 4.2 Released date: July 6, 2017 CADdoctor EX Product Configuration Standard Function Product Import &
More informationSolidView Features List
SolidView 2011.1 Features List SolidView/Lite Features View, measure and modify SVD fi les from SolidView/Pro. View STL, SFX, SolidWorks, and VRML CAD files. SolidView Features View, measure, modify and
More informationProposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata
Proposal for ISO/IEC SC24 Technical Report: CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata Hyokwang Lee and Don Brutzman Web3D Korea Chapter / Web3D CAD Working Group
More informationTetra4D Converter. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Converter
Tetra4D Converter Version 2016 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Converter Table of Contents Version 2016... 2 Definition of Release Types... 2 Version
More informationPTC CREO ROADMAP. Raphael Nascimento Product Manager. 3 March, 2016
PTC CREO ROADMAP Raphael Nascimento Product Manager 3 March, 2016 PTC CREO ROADMAP Review of PTC Creo 3.0 New Since June 2014 PTC Creo 4.0 and Beyond 2 PTC CREO ROADMAP Review of PTC Creo 3.0 New Since
More informationMaking NX 12 Teamcenter Integration work for you
Making NX 12 Teamcenter Integration work for you Realize innovation. Making NX 12 Teamcenter Integration work for you Tuesday 14.30 15.30 Making NX 12 Teamcenter Integration work for you Abstract: Take
More informationPresentation at ProSTEP Symposium 2010
Presentation at ProSTEP Symposium 2010 Winfried Weber, T-Systems International GmbH April 28, 2010 COM/FOX enables high end applications of JT and PLMXML This presentation describes a case study based
More informationUSER GUIDE. CREO - 3DEXPERIENCE CATIA V6 Release Version : 19.3 Revision: 1.0 Issued: /08/2016
USER GUIDE CREO - 3DEXPERIENCE CATIA V6 Release Version : 19.3 Revision: 1.0 Issued: /08/2016 THEOREM SOLUTIONS 2016 Contents Overview of Visualise 3D... 2 About Theorem...2 Theorem s Product Suite...2
More informationDOMORE A C E aras.com. Copyright 2013 Aras. All Rights Reserved.
DOMORE A C E 2 0 1 3 Copyright 2013 Aras. All Rights Reserved. aras.com ACE EUROPE 2013 Digital Mockup with Aras John Sperling, VP Product Management, Aras Germar Nikol, Director Visualization Technologies,
More information3D-Tool Version 13 - Specifications. Available Program Versions. Free Test. Licensing and Activation. Software Requirements
3D-Tool Version 13 - Specifications 3D-Tool is a professional CAD-Viewer for 3D-models and 2D-drawings. You do not need any special CAD skills to view models in 3D, to measure distances, angles, radii
More informationUtilities for Analysing the Content of JT Files. Product Release Version 19.3 USER GUIDE
Utilities for Analysing the Content of JT Files Product Release Version 19.3 USER GUIDE Document Revision: 1.0 Issued: 18/08/2016 Contents Overview of JT... 3 Working with JT files...3 The JT File Architecture...3
More informationTowards a Curation and Preservation Architecture for CAD Engineering Models
Towards a Curation and Preservation Architecture for CAD Engineering Models Alex Ball, Lian Ding, Manjula Patel University of Bath Outline Introduction Industrial Context Computer-aided design (CAD) Management
More informationNX electrical and mechanical routing
electrical and mechanical routing Accelerating design of electrical and mechanical routed systems in complex assemblies Electrical routing benefits Re-uses logical design eliminates redundant data creation
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Presentation by Trevor Leeson Theorem Solutions Date 09/10/2018, Theorem Solutions CAD functional capabilities supported by the STEP AP242
More informationWebinar. Search No Further D PDF Pro, Version 2.2 is Here! June 16 th, PROSTEP, Inc.
Webinar Search No Further... - 3D PDF Pro, Version 2.2 is Here! June 16 th, 2016 2016 PROSTEP, Inc. No part of this presentation may be reproduced or transmitted in any form for any purpose without the
More informationANSYS 14.0 Geometry and Meshing Update Steve Varnam ANSYS UK Ltd.
ANSYS 14.0 Geometry and Meshing Update Steve Varnam ANSYS UK Ltd. 1 ANSYS Workbench Platform The most comprehensive platform for Multiphysics Simulations ANSYS Workbench Framework ANSYS DesignXplorer ANSYS
More informationFundamentals of Modeling with Simcenter 3D Robin Boeykens
Fundamentals of Modeling with Simcenter 3D Robin Boeykens robin.boeykens@siemens.com Realize innovation. 3D CAE for the digital twin Simcenter 3D Page 2 Simcenter 3D Engineering Desktop Simcenter 3D Engineering
More information3D-Tool Version 13 - Specifications. Available Program Versions. Free Test. Licensing and Activation. Software Requirements
3D-Tool Version 13 - Specifications 3D-Tool is a professional CAD-Viewer for 3D-models and 2D-drawings. You do not need any special CAD skills to view models in 3D, to measure distances, angles, radii
More informationChapter 9 3D Modeling
Chapter 9 3D Modeling Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 3D Modeling Snapshot Since Mid 1980 s become common place in industry Software Types Wireframe
More informationTetra4D Converter. Version 5.1. Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Converter
Tetra4D Converter Version 5.1 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Converter Table of Contents Version 5.1... 3 Definition of Release Types... 3 Version
More informationPTC Corporate Strategy & Creo Roadmap
PTC Corporate Strategy & Creo Roadmap Paul Sagar Vice President, PTC Creo Product Management November 19, 2015 Eindhoven PTC Creo Roadmap Corporate Stategy New in Creo 3.0 Since June 2014 PTC Creo 4.0
More informationJT Validation Utility
JT Validation Utility Product Release Version 19.3 USER GUIDE Document Revision: 3.0 Issued: 25/08/2016 This software and related documentation are proprietary to Theorem Solutions Limited. Copyright 2016
More informationPTC CREO PARAMETRIC ESSENTIALS PACKAGES. Powerful 3D CAD solutions optimized for your product development tasks. Essentials Packages
PTC CREO PARAMETRIC ESSENTIALS PACKAGES Powerful 3D CAD solutions optimized for your product development tasks Product design firms and manufacturing companies are under constant pressure to develop more
More informationKisters Roadmap STEP AP 242. Germar Nikol, Director Visualization Technologies
Kisters Roadmap STEP AP 242 Germar Nikol, Director Visualization Technologies Overview KISTERS KISTERS figures: Founded: 1963 Employees: 550 Turnover: 65 M Euros Locations: 20 worldwide Headquarter: Germany
More informationAdditive manufacturing with NX
Additive manufacturing with processes. By using you have the power to drive the latest additive manu facturing equipment, including powder bed 3D printers. Delivering design, simulation and manufacturing
More informationTata Elxsi benchmark report: Unreal Datasmith
This report and its findings were produced by Tata Elxsi. The report was sponsored by Unity Technologies. Tata Elxsi benchmark report: comparing PiXYZ Studio and Unreal Datasmith A Tata Elxsi perspective
More informationSimcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
More informationDesign Guidelines. Version: July 2018, Copyright ACEO. aceo3d.com
Design Guidelines Version: July 2018, Copyright ACEO aceo3d.com Introduction ACEO offers 3D printing services based on Wacker silicone elastomers. The printing strategy as well as the orientation on the
More informationUSER GUIDE. 3DEXPERIENCE CATIA V6 Creo View Release Version : 20.2 Revision: 1.0 Issued: 15/01/2018
USER GUIDE 3DEXPERIENCE CATIA V6 Creo View Release Version : 20.2 Revision: 1.0 Issued: 15/01/2018 THEOREM SOLUTIONS 2018 Contents Overview of Visualise 3D About Theorem Theorem Solutions is a world leader
More informationGeometric Modeling Topics
Geometric Modeling Topics George Allen, george.allen@siemens.com Outline General background Convergent modeling Multi-material objects Giga-face lattices Page 2 Boundary Representation (b-rep) Topology
More informationWebinar Lose Your Paper Manuals Integrate Interactive Work Instructions
Webinar Lose Your Paper Manuals Integrate Interactive Work Instructions August 11 th, 2016 2016 PROSTEP, Inc. No part of this presentation may be reproduced or transmitted in any form for any purpose without
More informationNX Advanced Simulation
Siemens PLM Software Integrating FE modeling and simulation streamlines product development process Benefits Speed simulation processes by up to 70 percent Perform accurate, reliable structural analysis
More information102_PTC PRODUCT UPDATE FOR PTC CREO ELEMENTS/DIRECT USERS
102_PTC PRODUCT UPDATE FOR PTC CREO ELEMENTS/DIRECT USERS Berthold Hug Product Manager November 2016 PTC Forum Europe Stuttgart, Germany AGENDA 1. CAD and PLM Strategy for Elements/Direct Development Strategy
More informationAFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse
AFNeT prostep ivip STEP AP242 Day 17 October 2018 Airbus, Toulouse Christian Caillet Datakit c.caillet@datakit.com Presentation : Datakit - CrossCADWare Content Product : Datakit CrossCADWare suite - CrossCADWare
More information2D CAD. Courseware Issued: DURATION: 64 hrs
2D CAD Introduction File management Orthographic drawings View management Display management Layer management Selection methods Parametric drawings Symbol creation using block BOM / Joinery details creation
More informationPTC Creo 3.0 Unite Technology
PTC Creo 3.0 Unite Technology Marc Schuetz PTC Creo Product Management November 20, 2014 Agenda PTC Creo Unite Technology Breakthrough capabilities to improve productivity in Multi-CAD environments Key
More informationCoCreate OneSpace Modeling Data Adapter
CoCreate OneSpace Modeling 2007 - Data Adapter This document contains the individual datasheets for the native CAD adapters Table of Contents 1. CATIA V4 Data Adapter 2. Unigraphics Data Adapter 3. Pro/ENGINEER
More information2. BIM tools and Parametric
ICT Enhanced Buildings Potentials Produkt og Procesmodeller (PPM) i byggeriet. Product and Process models in Construction. 2. BIM tools and Parametric Modeling. Interoperability. Cand. Scient. Bygningsinformatik.
More informationNX Mach Series Design Solutions Power, flexibility and control improve design productivity
Mach Series Design Solutions Power, flexibility and control improve design productivity fact sheet www.ugs.com Summary The Mach Series Design software solutions combine the best of, the leading solution
More informationTetra4D Enrich. Version Release Notes. Details of new features, updated format support and bug fixes for Tetra4D Enrich
Tetra4D Enrich Version 2017 Release Notes Details of new features, updated format support and bug fixes for Tetra4D Enrich Tetra4D Enrich 2017 Release Notes 1 Table of Contents Version 2017... 3 Definition
More informationCADfix 10 SP2 Data Exchange Fix Change Notes
CADfix 10 SP2 Data Exchange Fix Change Notes Change Notes for CADfix 10 SP2 as a brief summary of each fix arranged under their respective Problem report number(s): 7961 Parasolid imported Toroid Face
More informationPTC Technical Specialists E-Newsletter Date: March 31, 2005
PTC Technical Specialists E-Newsletter Date: March 31, 2005 PTC Product Focus: A) Data Exchange Options in Wildfire 2.0 Tips of the Week: Announcements: Most Recent Announcements B) Customizing the Windchill
More informationRoman Walsh Application Engineering Manager
Rapid Engineering through Topological Optimization and Direct Modeling 15.0 Release Roman Walsh Application Engineering Manager Roman.Walsh@ansys.com 1 2014 ANSYS, Inc. October 23, 2014 About ANSYS, Inc.
More informationCAD Working Group, SIGGRAPH CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata
CAD Working Group, SIGGRAPH 2014 CAD-to-X3D Conversion for Product Structure, Geometry Representation and Metadata Hyokwang Lee and Don Brutzman Web3D Korea Chapter / Web3D CAD Working Group 2015. 8. 11.
More informationGeometry Compare and Validation For QA
Geometry Compare and Validation For QA Introducing MagicCheck Craig Dennis & Larry Kuehn GPDIS_2012.ppt 1 About TransMagic Founded in 2001 Developers of 3D interoperability, repair, validation & reporting
More informationPro/ENGINEER Interface for CATIA V5 with Associative Topology Bus (ATB) Pro/ENGINEER Wildfire Series Overview
Pro/ENGINEER Interface for CATIA V5 with Associative Topology Bus (ATB) Pro/ENGINEER Wildfire Series Overview Asa Trainer Director, Product Management March 2010 Rev I Pro/ENGINEER Interface for CATIA
More informationOptimized Composite Design Methodologies that Enable Rapid Change
Optimized Composite Design Methodologies that Enable Rapid Change Realize innovation. Agenda Multi Ply Introduction Application Rapid Change Acquired by Siemens PLM Software 2011 Leading composite design
More informationFemap v and NX Nastran v9.1
Femap v11.1.2 and NX Nastran v9.1 Technical Seminar for Femap and NX Nastran Users Hosted by: Adrian Jensen, BSME, P.E., Sr Staff Mechanical Engineer George Laird, PhD, PE, Principal Mechanical Engineer
More informationTekla Structures and Autodesk Revit useful geometry exchange
Tekla Structures and Autodesk Revit useful geometry exchange General guidance: Updated: 2nd June, 2014 (New material is starred) David Lash Engineering Segment FROM Autodesk Revit Architectural to Tekla
More informationLecture 6: CAD Import Release. Introduction to ANSYS Fluent Meshing
Lecture 6: CAD Import 14.5 Release Introduction to ANSYS Fluent Meshing 1 Fluent Meshing 14.5 Assembly meshing Workflow This Lecture Tessellated or Conformal CAD import Cap Inlet/Outlets, Create Domains/BOI
More informationNX Strategy & Roadmap
Speed of Innovation >>> NX Strategy & Roadmap Mike Rebrukh Product Management Paul Bevan Product Marketing Realize innovation. NX Release Roadmap NX 11.0 Convergent Modeling Technology Additional Touch
More informationTetra4D Converter/ Tetra4D Reviewer
Tetra4D Converter/ Tetra4D Reviewer Version 2017 SP2 Release Notes Details of new features, updated formats support and bug fixes for Tetra4D Converter Tetra4D Converter 2017 SP2 Release Notes 1 Table
More informationAutodesk Moldflow Adviser. Design plastics confidently.
Autodesk Moldflow Adviser Design plastics confidently. Design Plastic Parts and Injection Molds with Confidence Discover, communicate, and resolve potential manufacturing defects earlier in the product
More informationNX Fixed Plane Additive Manufacturing Help
NX 11.0.2 Fixed Plane Additive Manufacturing Help Version #1 1 NX 11.0.2 Fixed Plane Additive Manufacturing Help June 2, 2017 Version #1 NX 11.0.2 Fixed Plane Additive Manufacturing Help Version #1 2 Contents
More information