Model Table. Series. RIXO series. RIX30 series 30 illumination. RIX45 series 45 illumination

Transcription

1 Ring Light Ring Light -RI series Series Multi-angles available for ring light to get D information. RIXO series 0 illumination RIX0 series 0 illumination RIX series illumination Special heat transferring design High-density arrays with the intensity illumination Diffuser is available for more uniform illumination RIX60 series 60 illumination using gap design to enlarge the size of heat transfer area so that light has long life time RIX80 series 80 illumination transparent diffuser uniformity diffuser standard diffuser Inspection of printed inspection OCR on IC chips Used to the microscope illumination Calibration Inspection of plastic container OCR on integrated circuit Surface inspection -RI000 emitting angle ring light Rows of Model RIX0 series 0 illumination Note:The structure picture is only for your reference other angle image result comparation Color Size -RI00 V/.W V/0.W -RI000 V/.7W V/0.W -RI7000 -RI000 V/.7W V/.8W V/6.0W V/.W -RI000 V/7.W V/.6W -RI000 V/.6W V/0.W 6 -RI00 V/.6W V/0.8W 7 -RI700 V/.W V/.7W 8 -RI00 V/.6W V/.W -RI00 V/.W V/.0W 0 -RI00 V/.W V/.W -RI800 V/8.0W V/.8W -RI0 V/.0W V/.W -RI70 V/.W V/.8W -RI0 V/.6W V/.W -RI0 V/8.0W V/.6W 6 -RI0 V/0.W V/6.0W 7 -RI7060 V/.W V/.0W 8 -RI060 V/.8W V/.W -RI060 V/0.W V/.0W 0 -RI060 V/0.8W V/6.W -RI8060 V/7.W V/.0W -RI080 V/.0W V/.W -RI0080 V/.6W V/.W -RI080 V/8.0W V/.8W -RI780 V/.0W V/7.W 6 -RI00 V/0.8W V/0.W 7 -RI700 V/.8W V/0.6W 8 -RI00 V/.W V/0.8W -RI00 V/.W V/.6W 0 -RI00 V/.8W V/.W -RI800 V/.W V/.W -RI800 V/0.W V/0.W -RI V/.W V/.W -RI0 V/.7W V/.W -RI6 V/.7W V/.W 6 V/6.W V/.W 7 8 -RI0 direction and light axis is 0 direction and light axis is 0 direction and light axis is direction and light axis is 60 -RI V/.8W V/.W -RI00 V/7.7W V/.W -RI0 V/0.7W V/0.7W 0 -RI8 V/0.W V/0.W -RI V/.W V/0.W -RI770 V/6.0W V/.8W -RI807 V/.6W V/.6W The angel between illumination direction and light axis is 80 directionand light axis is 0 -RI00 -RI000 -RI7000 -RI000 -M -M Ø0 Ø0 Ø Ø Ø6 Ø Ø Ø Ø without diffuser Diffuser(Available for your choice) with diffuser 8 Structure Display RI000 -RI RI00 -RI M -M -M -RI8060 -RI0 Illumination picture -RI00 Physical picture Illumination picture Picture with single RI0 illumination 8 O-ring surface inspection. By using combined multi angles ring light, it is rather easy to show the curve surface information clearly Ø Ø0 Ø8 Ø6. Picture with multi-level ring light illumination 0 Wafer perimeter edge position marked. Different angle gets different image result as above pictures showed Ø0 Ø Ø0 Ø00 -M 8. 0

2 Ring Light Ring Light -RI00 0 -RI00 -RI00 -RI RI0 8 -RI -RI00 0 -RI8 -M -M -M 6 -M -M -M RI0 -RI70 -RI0 6 -RI0 Ø0 Ø RI0 8 -RI7060 -RI RI060 Ø0 Ø8 0 -RI060 -RI8060 -RI080 Ø0 Ø08 Ø80 Ø0 Ø0 Ø0 Ø76 0 -RI0080 Ø0 Ø00 Ø80 Ø7 Ø0 Ø7 Ø0 Ø0 Ø00 Ø0 Ø Ø80 Ø0 -M -M -M -M -M 6-M -M Ø0 0 -RI RI RI00 8 -RI700 -M 6-M -M -M Ø0 Ø00 Ø8 Ø7 Ø6 Ø6 Ø Ø0 Ø6 Ø 6 0 -RI00 0 -RI00 -RI00 -RI800 -M -M Ø0 Ø8 Ø0 Ø Ø86 Ø Ø06 Ø80 Ø7 Ø6 Ø0 Ø7 Ø RI0 -RI -RI770 -RI807 -RI800 -RI -RI0 6 -RI6 -M -M Ø Ø Ø7 Ø0 Ø8 Ø6 Ø Ø Ø0 Ø00 Ø67 Ø Ø8 Ø0 Ø7 Ø6 Ø0 Ø00 Ø68 Ø Ø7 Ø00 Ø80 Ø Ø8 Ø Ø6 -M -M 6-M Ø Ø0 Ø0 Ø Ø8 Ø6. Ø7 Ø6 Ø6 Ø80 Ø M Ø8 Ø0 Ø

3 Half Ring Light Half Ring Light -RIC series Model Half ring light is good for curved object application, combined with bar light, it can be oval shape Color Size -RIC707 V/.W V/0.W -RIC0 V/.W V/0.W -RIC00 V/.W V/.0W -RIC00 V/.W V/.7W -RIC00 V/7.8W V/.W -RIC707 -RIC0 -RIC00. -RIC00. x MThrough Ø0 Ø Ø06. R7. R R7 Combined with bar light can be circle illumination The best option for elliptical object R7. R R8 R Special half ring light design, in the curved object inspection, it achieve low angle illumination and get very good comparation x MThrough R6 Ø Ø0 Ø86 -M M 0 -RIC00 Compact array to increase the intensity and uniformity x0 =80 R0 R0 R Curved angle can be customized -M Diffuser Curved object size measurement Inspection of reflective surface -RIC707 emitting Angle half ring light Struction display and working way Cable dimension measurement 8 Wafer surface letter recognition Silicon part shape location Metal surface defects inspection

4 Low Angle Ring Light -RIF series Ring shape and diffusing illumination.even illumination in the large square, without the shadow Model -RIF78 -RIF88 -RIF0 -RIF60 V/.W V/.W V/6.0W V/.W V/.W V/.W V/8.0W V/6.0W Low Angle Ring Light -RIF78 -RIF88 -RIF0 -RIF Ø78 Ø8 Ø88 Ø68 Ø0 Ø00 Ø0 Ø0 Ø0 Used in large ring objects and small irregularly shaped objects Illuminate surface evenly without shadow In order to achieve shadowless illumination of ring light, different work distance gets different illumination result with different image result Comparing to the general ring light, it is higher uniformity illumiation illumination result comparation Inspection of surface scratches Identification of printing character,logo barcode, fingerprint -RIF88 low Angle Ring Light standard ring light low angle ring light Special diffuser Chips surface dirty inspection Gear surface defects inspection Glue part surface letter recognition Knife depth measurement 0

5 Flat Dome Ring Light -RIE series High uniform illumination for the large square area, to eliminate the flare and ghosting Model -RIE0 -RIE7 -RIE00 -RIE0 V/.W V/.W V/.8W V/0.W V/.0W V/.W V/8.0W V/.0W Flat Dome Ring Light -RIE0 -RIE7 -RIE00 -RIE Ø 0 Ø7 Ø0 6 Ø00 Ø Special diffuser design Comparing the general ring light, it is higher uniformity illumination Using special diffuser design to make the light diffused and reflected, and get even illumination. It can filter the tiny different and show the big different clearly. The comparison of ring light and flat dome ring light Metal objects locating and measurement Inspection of scratches -RIE7 flat Dome Ring Light deneral ring light flat dome ring light Special diffuser Chip PIN foot flatness detection and Resistor surface letter recognition The burr inspection of glass bracket edge character recognition Mobile camera location

6 Dome Ring Light Dome Ring Light -RIW series High uniform illumination in large area, even illumination on the multi-slope objects to eliminate the reflection Model -RIW70 -RIW0 -RIW0 V/.0W V/.W V/.W V/0.7W V/.0W V/.W -RIW70 -RIW0 -RIW Ø8 Ø6 Ø0 Ø8 Ø76 Ø0 Ø Ø76 Special diffuser equipped design Special diffuser design makes the light multi refract and reflect, it makes the multi direction and uniformity illumination Comparing to the general right light,higher uniformity illumination Image result comparation with standard ring light Electronic part repair or collection -RIW0 inspection Electronic part installation location Surface letter and image recognition dome Ring Light standard ring light dome ring light Size measurement Special diffuser Plastic part surface letter recognition and location Earphone glue defects inspection Installation location recognition Part letter recognition

7 Flat Ring Light Flat Ring Light -RIU series Model Spherical design, to eliminate the re ection on the surface effectively Color Size -RIU80 V/.W V/.0W -RIU V/.W V/.0W -RIU0 V/.6W V/.W -RIU80 -RIU RIU0 Ø0 Ø0 Ø Comparing to the general right light, it is higher uniformity illumination Special diffuser design to diffuse the light in multi-angle direction,for the uniform illumination on the uneven surface. Ø80 Ø Special diffuser makes light reflect to different direction, and achieve dome illumination to reduce reflective and make the whole part even. Image result comparation with standard ring light Application area Reflective surface letter or image inspection -RIU and recognition Electronic part and glass products inspection Punching metal inspection Injection plastic inspection flat Ring Light standard ring light flat ring light Special diffuser Resistor surface letter inspection 6 Keypad letter inspection Parts exist and location check Remote controller printing quality inspection 7

8 Shadowless Ring Light -RIP series Using high power and diffuser with high emission to get high intensity shadowless area Model -RIP0 -RIP80 -RIP V/.6W V/.W V/.0W V/7.7W V/.7W V/6.8W Shadowless Ring Light -RIP0 -RIP80 -RIP -M 8 6-M 8 6-M 8 Ø0 Ø7 Ø7 Ø80 Ø0 Ø0 Ø Ø8 Ø High power, high concentration and shadowless result Output area is used connector to make cable stable 6 RIP series and RIF intensity comparation WD Intensity Item No. RIP RIF RIP and RIF intensity comparation Intensity(lux) WD(mm) *Above data is just for reference, not for quality insurance RIF series intensity RIF series intensity Remark: it is under 00% work situation to test the intensity under different WD. Data is just for reference -RIP80 cable connector and cable Electronic part surface inspection Cylinder object inside surface dirty point inspection Diffuser Reflective glue Aluminum housing -RIP0 Aluminum Heat transfer material shadowless Ring Light High power Capacity surface solder size measurement Paper cap inside dirty inspection Magnet location inspection Metal surface solder inspection 60 6

9 High Power Ring Light -RIG series New High power, compact array, intensity is times than standard one Model -RIG000 -RIG000 -RIG8000 V/7.W V/.W V/8.8W V/.8W V/.6W V/.W High Power Ring Light -RIG000 -RIG000 -RIG Gap design for good heat transfer, light is stable with long life time Double intensity compared with standard one.80 Length000mm.80 Length000mm.80 Length000mm Intensity comparation of high power ring light and standard one Intensity(lux) High power ring light standard ring light WD(mm) Item no:-rig000 *Above data is just for reference, not for quality insurance Long working distance illumination High speed on-line inspection Big FOV illumination Aluminum house Heat transfer gap Aluminum housing -RIG000 High power high power ring light Convergent lens Customize diffuser Structure displag and working way Metal clip gap distance inspection Size measurement Disk assembly location Dent gap inspection 6 6