BuildDTM.tml. Create a DTM from Contours Quickly and Easily
|
|
|
- Dorcas Stanley
- 5 years ago
- Views:
Transcription
1 BuildDTM.tml Create a DTM from Contours Quickly and Easily A DTM (Digital Terrain Model) is a computer-generated, 3-dimensional model of a surface created from points that have x, y and z coordinates. In Terramodel a DTM is used as the basis for many advanced features such as calculating volumes and interpolating cross sections. (Terramodel User's Guide, Chapter 7. "What is a DTM?") If you import contour data into Terramodel from another program and want to create a DTM, this TML is for you! BuildDTM.tml will do the following: Find all 3D Plines and convert them to sets. Find all Sets with single elevations and treat them as contours. Filter contours to create an accurate surface with the smallest amount of data. Find all spot elevations if they are points, point blocks or just text. Create a DTM. The BuildDTM command: Explanation of Each Item: 1. Contours: (1 of 7) [1/3/2003 2:54:38 PM]
2 Contour Layers - BuildDTM.tml will search the project and list ALL layers containing 3D plines or sets with points of the same elevation. Often, contours are drawn on different layers and finding all layers with contour data can be difficult and time consuming. Maximum segment length - When a set line is created for the DTM from a contour line (pline) then points are created along the set. This setting controls the maximum distance between points in straight segments. Maximum deviation from original line - When the contours are converted to sets, BuildDTM filters the contours and removes excessive vertices to prevent "monster" sized projects. This option helps preserve the integrity of the original contours. The new set will not deviate from the original line more than the distance specified here. A smaller distance here will create more points. (2 of 7) [1/3/2003 2:54:38 PM]
3 Segments per spline - If contours are splined, the number of points considered along each spline segment is specified here. This should always be 3 or greater. The higher this number is, the longer the process will take. Delete old lines - Since the contour lines will be converted to sets, this option allows you to delete the original contours. This will help keep the file size minimal. However, if the original contours are deleted, comparing the new DTM and the original contours will not be possible. 2. Spot elevations: Spot Elevation Text: Data imported into Terramodel may have spot elevations that are text objects. Terramodel requires points with elevations for the DTM. BuildDTM will search for Text objects with numeric values or elevations and create points with elevations on the DTM. Spot Elevation Blocks: Points can be imported as blocks. BuildDTM searches for blocks with elevations and creates points with elevations on the DTM. Spot Elevation Points: Points with elevations will be found and used as DTM points. Relayer Points: Points with elevations that are found can be relayered to the DTM layer to prevent duplicate points. Copy Points: Points with elevations that are found will be copied to the DTM layer and the original points will remain on their original layers. (3 of 7) [1/3/2003 2:54:38 PM]
4 3. Linking: Max distance along edge links: This option specifies the maximum edge distance of links along the perimeter of the DTM. This option is very important for non-rectangular shaped DTM's. For example, in the case of a U shaped DTM or a Horseshoe shaped DTM, if the Max link distance is set too high, then links could enclose the DTM. (4 of 7) [1/3/2003 2:54:38 PM]
5 Display Links: This option will turn on the links for visual inspection which is a very important part of evaluating the Digital Terrain Model. 4. New DTM Layer: This is the layer for the new DTM created by BuildDTM. It is recommended to create a New layer for this setting. 5. Treat elevation zero as 2D: (5 of 7) [1/3/2003 2:54:38 PM]
6 If you are not at sea level, then you want to check this option. Often, 2D linework and points are assigned an elevation of zero. Terramodel will see this as a valid elevation and could result in an inaccurate model of the surface. DTM Tips: Once the DTM is created by BuildDTM, generate a 3D View of the surface. Select 3D Visualizer from the DTM menu. Select the DTM layer created by BuildDTM then click OK. You may need to created two DTM's. A DTM from Existing contours and a DTM from Proposed contours. This task is a little more difficult since you must separate the Existing data imported from the Proposed data. With BuildDTM, you simply run the command twice. Each time selecting the appropriate layers for each DTM. Advantage of using BuildDTM: Finding all layers for a DTM can be very difficult. The BuildDTM command quickly identifies all the possible DTM data. Use layer lists created by BuildDTM to verify valid contours and spot elevations. Isolate each layer list used by BuildDTM. The default name of the layer lists are: Contours, Spot Text, Spot Blocks and Spot Points. ILL.tml is available from which will isolate layers in a layer list in one step. Without ILL.tml, follow these steps to isolate a layer list: 1. Click on LSET which is found in the top left corner of the Terramodel screen. 2. Click Select All 3. Uncheck the Visible checkbox to turn off the visibility of all layers. 4. Click on Select by Llist Highlight the Contour layer list and click OK. 6. Click on the Visible checkbox to turn on the visibility for the selected layers. Click OK. 7. Inspect the contour layers used to build the DTM. 8. Repeat these steps 1-7 to inspect the spot elevations. (6 of 7) [1/3/2003 2:54:38 PM]
7 Programmer's Notes: Building DTM's from contours can be very frustrating and tedious. Not all data imported from other programs are on one layer. BuildDTM offers a solution to Terramodel users that will quickly find DTM data convert it to 3D points and sets and place it on one layer. And it is easy! When comparing BuildDtm to the Filter command that comes with Terramodel, I found that BuildDtm can reduce the number of points on a DTM created from contours as much as 75% with similar accuracy. Results will of course vary in different terrain. (7 of 7) [1/3/2003 2:54:38 PM]
Insight: Measurement Tool. User Guide
OMERO Beta v2.2: Measurement Tool User Guide - 1 - October 2007 Insight: Measurement Tool User Guide Open Microscopy Environment: http://www.openmicroscopy.org OMERO Beta v2.2: Measurement Tool User Guide
v TUFLOW 1D/2D SMS 11.2 Tutorial Time minutes Prerequisites TUFLOW 2D Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial describes the generation of a 1D TUFLOW project using the SMS interface. It is strongly recommended that the TUFLOW 2D tutorial be completed before doing
Graphic Display of Vector Object
What is GIS? GIS stands for Geographic Information Systems, although the term Geographic Information Science is gaining popularity. A GIS is a software platform for storing, organizing, viewing, querying,
1 st Project Tutorial. IrriExpress
st Project Tutorial IrriExpress Table of Contents. Import Map and Elevations 2. Place Pivot. Place Block 4. Fill Block 5. Create Valve to Block 6. Create Manifold for Block 7. Create Mainline 8. Run Hydraulics
If you are relying on someone else to provide existing ground data to you, use the guidelines below to ensure you receive the best data available.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Basics of Existing Ground Surface Generation The accuracy of an existing
Module 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
SEER-3D: An Introduction
SEER-3D SEER-3D allows you to open and view part output from many widely-used Computer-Aided Design (CAD) applications, modify the associated data, and import it into SEER for Manufacturing for use in
Roadway Design using GeoTools
Roadway Design using GeoTools Introduction GeoTools is a general-purpose productivity tool for users of all types of geographic data. In the Civil Tools section, there are many tools for Civil engineering
Topographic Survey. Topographic Survey. Topographic Survey. Topographic Survey. CIVL 1101 Surveying - Introduction to Topographic Mapping 1/7
IVL 1101 Surveying - Introduction to Topographic Mapping 1/7 Introduction Topography - defined as the shape or configuration or relief or three dimensional quality of a surface Topography maps are very
Terramodel 10.61L Update from Terramodel 10.61K
Release Notes Introduction How to install New commands and changes Terramodel 10.61L Update from Terramodel 10.61K Software for Civil Engineers and Surveyors Version 10.61L May 2017 Trimble Trimble Navigation
TUFLOW 1D/2D SURFACE WATER MODELING SYSTEM. 1 Introduction. 2 Background Data
SURFACE WATER MODELING SYSTEM TUFLOW 1D/2D 1 Introduction This tutorial describes the generation of a 1D TUFLOW project using the SMS interface. It is recommended that the TUFLOW 2D tutorial be done before
Spline Interpolation and Tangent Arc Approximation Program
Spline Interpolation and Tangent Arc Approximation Program (User Manual) This program serves to convert the 2D contour profiles presented by the points (X, Y, Z coordinate array, though the Z-coordinate
v Mesh Generation SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Mesh Generation Objectives This tutorial demostrates the fundamental tools used to generate a mesh in the SMS. Prerequisites SMS Overview SMS Map Module Requirements Mesh Module
Tutorial 3 Sets, Planes and Queries
Tutorial 3 Sets, Planes and Queries Add User Plane Add Set Window / Freehand / Cluster Analysis Weighted / Unweighted Planes Query Examples Major Planes Plot Introduction This tutorial is a continuation
Chapter 4 Determining Cell Size
Chapter 4 Determining Cell Size Chapter 4 Determining Cell Size The third tutorial is designed to give you a demonstration in using the Cell Size Calculator to obtain the optimal cell size for your circuit
v Mesh Editing SMS 11.2 Tutorial Requirements Mesh Module Time minutes Prerequisites None Objectives
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial lesson teaches manual mesh generation and editing techniques that can be performed using SMS. It should be noted that manual methods are NOT recommended.
EXERCISE 7: CREATING A FUSION PROJECT PART 2
Document Updated: January, 2009 Fusion ver2.65 Important: leave the symbol set to none. Introduction This exercise continues with the creation of a Fusion project. In the last exercise you: examined the
City of La Crosse Online Mapping Website Help Document
City of La Crosse Online Mapping Website Help Document This document was created to assist in using the new City of La Crosse online mapping sites. When the website is first opened, a map showing the City
v Map Module Operations SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial describes the fundamental tools in the Map module of the SMS. This tutorial provides information that is useful when constructing any type of geometric
2. Any VIP screen, click on the VIP Cart button located in the top right corner of the screen.
Access VIP Cart VIP Order Entry The VIP Cart is only accessible after parts have been added to the cart from either the Single Line Price screen or the Multi Line Price screen. For more information on
SurvCADD DTM - Contour Module
SurvCADD DTM - Contour Module Introduction The DTM-Contour module calculates surface models as either 3D grid mesh or triangulation networks. Contour maps, volumes and other applications use these surface
RSPile. Tutorial 3 Grouped Pile Analysis. Pile Analysis Software. Grouped Pile Analysis
RSPile Pile Analysis Software Tutorial 3 Grouped Pile Analysis Grouped Pile Analysis Introduction This tutorial will demonstrate how to model grouped piles under a cap. The finished product of this tutorial
OPTIONAL EXERCISE 2 Creating a Fusion Project Part B
OPTIONAL EXERCISE 2 Creating a Fusion Project Part B Objective Last Updated: April, 2016 Version: Fusion 3.50 This exercise continues with the creation of a Fusion project. In the last exercise you: examined
DATA MODELS IN GIS. Prachi Misra Sahoo I.A.S.R.I., New Delhi
DATA MODELS IN GIS Prachi Misra Sahoo I.A.S.R.I., New Delhi -110012 1. Introduction GIS depicts the real world through models involving geometry, attributes, relations, and data quality. Here the realization
Using Grid Math in Surfer to Create Geological Models
Using Grid Math in Surfer to Create Geological Models When gridding data in Surfer, the grid file created is based on the input data provided. However, the data provided may not be complete, or may not
1. In the first step, the polylines are created which represent the geometry that has to be cut:
QCAD/CAM Tutorial Caution should be exercised when working with hazardous machinery. Simulation is no substitute for the careful verification of the accuracy and safety of your CNC programs. QCAD/CAM or
1st Point. 2nd Point. hold shift & drag along Y. Splines
Splines STEP 1: open 3DS Max _ from the Command Panel under the Create tab click on Shapes (note: shapes are really Splines) _ under Object Type click on Ellipse STEP 2: Expand the Keyboard Entry tab type
APPENDIX 13 TERRAIN NAVIGATOR PRO BASICS. Prepared by the Mapping and Marking Committee. Fifth Edition (Revised and Expanded) June 2014
APPENDIX 13 TERRAIN NAVIGATOR PRO BASICS Prepared by the Mapping and Marking Committee Fifth Edition (Revised and Expanded) June 2014 Published by the Oregon-California Trails Association P.O. Box 1019
Introduction to GIS A Journey Through Gale Crater
Introduction to GIS A Journey Through Gale Crater In this lab you will be learning how to use ArcMap, one of the most common commercial software packages for GIS (Geographic Information System). Throughout
Using Kingdom Suite for 3D Horizon/Fault Interpretation Parts 3 & 4 - Horizon Interpretation and Correlation
Using Kingdom Suite for 3D Horizon/Fault Interpretation Parts 3 & 4 - Horizon Interpretation and Correlation Wilson (2010) 1 A footnote to last week's exercise Double Vision? - Last week when you were
Tutorial 25 Soil Profile Option. Soil Profile Boundaries Profile Extents Assign materials & excavation Multi Scenario Modeling Profile from Boreholes
Tutorial 25 Soil Profile Option Soil Profile Boundaries Profile Extents Assign materials & excavation Multi Scenario Modeling Profile from Boreholes Introduction The Soil Profile option is an extension
Practical Solutions to Technical Problems August 2005 Page 1 of 8
V 9.0 Available 14 th September 2005 Come to the use group in Llandudno on 14/15 September at the Georges Hotel to get demonstrations and tuition with new and old features of the software. Summary of new
TopView Contact Angle Analysis
TopView Contact Angle Analysis April 4, 2004 Top view analysis measures the average diameter of the sessile drop when viewed from above, then computes what the contact angle must be in order that the sessile
Modify Panel. Lecturer: Asmaa Ab. Mustafa AutoCAD 2019 Ishik University Sulaimani 1. Contents
Chapter -4- Modify Panel Lecturer: Asmaa Ab. Mustafa Lecturer: Asmaa Ab. Mustafa AutoCAD 2019 Ishik University Sulaimani 1 Modify Panel commands 1. Move command 2. Copy command 3. Rotate command 4. Mirror
3DReshaper Help 2017 MR1. 3DReshaper Beginner's Guide. Tank
3DReshaper Beginner's Guide Tank 1 of 20 1 Introduction The Tank module is dedicated to tank analysis. It is aimed to above ground tanks, with vertical cylinder design, single shell, with or without roof.
Points Lines Connected points X-Y Scatter. X-Y Matrix Star Plot Histogram Box Plot. Bar Group Bar Stacked H-Bar Grouped H-Bar Stacked
Plotting Menu: QCExpert Plotting Module graphs offers various tools for visualization of uni- and multivariate data. Settings and options in different types of graphs allow for modifications and customizations
Organizing Your Contacts
You can organize your Contact list using either the Cisco IP Phone Messenger service application on your Cisco Unified IP Phone or the User Options web pages on the web. However, some tasks are not available
AutoCAD Civil 3D 2010 Education Curriculum Student Workbook Unit 2: Create Ground Data
AutoCAD Civil 3D 2010 Education Curriculum Student Workbook Unit 2: Create Ground Data Lesson 3 Surfaces Overview In this lesson, you learn how to work with surfaces in AutoCAD Civil 3D. Surfaces are threedimensional
Guide to WB Annotations
Guide to WB Annotations 04 May 2016 Annotations are a powerful new feature added to Workbench v1.2.0 (Released May 2016) for placing text and symbols within wb_view tabs and windows. They enable generation
Creating a Title Block & Border Using Chief Architect. Architectural Design & Residential Construction Penncrest High School
Creating a Title Block & Border Using Chief Architect Architectural Design & Residential Construction Penncrest High School 2017-2018 Select New Layout to begin designing your Title Block. Note: Once the
Boundary Edit Mode - Snip Segment
Boundary Edit Mode - Snip Segment The Tools Tab provides functions for working with field boundaries. 1. To activate the options, in the Tools drop-down window, select the Boundary Editing Mode (below
Transformations in the Plane - Activity 1 Reflections in axes and an oblique line.
Name: Class: p 5 Maths Helper Plus Resource Set. Copyright 00 Bruce A. Vaughan, Teachers Choice Software Transformations in the Plane - Activity Reflections in axes and an oblique line. ) On the diagram
Detailed Geoid Creation
Detailed Geoid Creation In addition to the standard methods of Geoid creation found in Carlson X-Port, customized geoids can also be created with Carlson Survey. Carlson X-Port, the desktop product that
v Overview SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
Tutorial 7. Water Table and Bedrock Surface
Tutorial 7 Water Table and Bedrock Surface Table of Contents Objective. 1 Step-by-Step Procedure... 2 Section 1 Data Input. 2 Step 1: Open Adaptive Groundwater Input (.agw) File. 2 Step 2: Assign Material
Boundary Edit Mode - Snip Field
Boundary Edit Mode - Snip Field The Tools Tab provides functions for working with field boundaries. 1. To activate the options, in the Tools drop-down window, select the Boundary Editing Mode (below left).
SMS v Culvert Structures with HY-8. Prerequisites. Requirements. Time. Objectives
SMS v. 12.1 SRH-2D Tutorial Culvert Structures with HY-8 Objectives This tutorial demonstrates the process of modeling culverts in SRH-2D coupled with the Federal Highway Administrations HY-8 culvert analysis
SmartDraft 19 PConnect Manual
Ignite your productivity. Manual PConnect Version: 19.0.x SmartDraft is designed to make AutoCAD, AutoCAD Civil 3D, AutoCAD Map 3D and BricsCAD more productive for civil engineers, mapping professionals,
Glider. Wing. Top face click Sketch. on the Standard Views. (S) on the Sketch toolbar.
Chapter 5 Glider Wing 4 Panel Tip A. Open and Save As "WING 4 PANEL". Step 1. Open your WING BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in WING 4 PANEL for the filename and press ENTER.
Smokin Hot AutoCAD MEP 2011 Tips
David Butts Gannett Fleming ME333-1 Join us for this fast paced, information filled AutoCAD MEP infopalooza - and have fun at the same time! Discover my favorite tips, tricks and best practices for AutoCAD
Purpose: To explore the raster grid and vector map element concepts in GIS.
GIS INTRODUCTION TO RASTER GRIDS AND VECTOR MAP ELEMENTS c:wou:nssi:vecrasex.wpd Purpose: To explore the raster grid and vector map element concepts in GIS. PART A. RASTER GRID NETWORKS Task A- Examine
CGWAVE Analysis SURFACE WATER MODELING SYSTEM. 1 Introduction
SURFACE WATER MODELING SYSTEM CGWAVE Analysis 1 Introduction This lesson will teach you how to prepare a mesh for analysis and run a solution for CGWAVE. You will start with the data file indiana.xyz which
EacMonsterNet Wireless Access Windows XP Computers
EacMonsterNet Wireless Access Windows XP Computers These instructions will help you set up your wireless connection on campus. Before beginning, you need: An activated student account on Gila Hank On-Line.
Create the Through Curves surface
Create the Through Curves surface 1. Open ffm4_mc_fender. 2. Select all three strings, and then on the Analyze Shape toolbar, click Show End Points. Notice there are two curves in the strings on the left
Oasys GSA. Getting Started
Getting Started 13 Fitzroy Street London W1T 4BQ Telephone: +44 (0) 20 7755 3302 Facsimile: +44 (0) 20 7755 3720 Central Square Forth Street Newcastle Upon Tyne NE1 3PL Telephone: +44 (0) 191 238 7559
v Creating a Size Function SMS 12.2 Tutorial Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Creating a Size Function Objectives This lesson will instruct how to create and apply a size function to a 2d mesh model. Size functions can be created using various data. This
Western Land Area Programmatic Environmental Assessment. APPENDIX F: Viewshed Study
APPENDIX F: Viewshed Study Dulles International Airport Western Land Area Viewshed Study FINAL Prepared by: EAC/Archaeology, Inc. September 26, 2017 Western Land Area This page is left intentionally blank.
Archiving s in Microsoft Outlook 2016
How to Manually Archive Emails Archiving Emails in Microsoft Outlook 2016 1. Open Microsoft Office Outlook 2016 2. At the top-left hand side of the screen, select File. 3. Click the box that says Cleanup
Introduction to GIS 2011
Introduction to GIS 2011 Digital Elevation Models CREATING A TIN SURFACE FROM CONTOUR LINES 1. Start ArcCatalog from either Desktop or Start Menu. 2. In ArcCatalog, create a new folder dem under your c:\introgis_2011
To start Kidspiration on a Macintosh: Open the Kidspiration 3 folder and double-click the Kidspiration icon.
Tutorial Six: Using steps to show progression of work The Step Workspace allows students to show and explain each step as they progress through a math project. Because their work is preserved and duplicated
Tutorial (Intermediate level): Dense Cloud Classification and DTM generation with Agisoft PhotoScan Pro 1.1
Tutorial (Intermediate level): Dense Cloud Classification and DTM generation with Agisoft PhotoScan Pro 1.1 This tutorial illustrates how to perform dense point cloud classification in manual and automatic
RMX. Font Remix Tools. for glyphs. Handbook. February 2016 Just Another Foundry GmbH
Font Remix Tools for glyphs Handbook February 2016 Just Another Foundry GmbH Font Remix Tools for Glyphs: Handbook page 2 of 9 Content 1. Getting started 1.1. Installation 1.2. Keyboard shortcuts 1.3.
RMX. Font Remix Tools FOR GLYPHS. Handbook
Font Remix Tools FOR GLYPHS Handbook October 2018 Font Remix Tools for Glyphs: Handbook page 2 of 9 Content 1. Getting started 1.1. Installation 1.2. Keyboard shortcuts 1.3. Requirements 2. Harmonizer
Using WindSim by means of WindPRO-interface gives the user many advantages:
1 Content: Content:...1 1. Introduction...1 Using WindSim by means of WindPRO-interface gives the user many advantages:...1 Important Limitations...2 Important Information about Nested Calculation...2
Module 4A: Creating the 3D Model of Right and Oblique Pyramids
Inventor (5) Module 4A: 4A- 1 Module 4A: Creating the 3D Model of Right and Oblique Pyramids In Module 4A, we will learn how to create 3D solid models of right-axis and oblique-axis pyramid (regular or
Nastran In-CAD: Understanding Data Conversion, Data Type, and Contour Type
Nastran In-CAD: Understanding,, and Issue When creating a contour plot of a result, what is meant by " ", " ", and " "? The options in the drop-downs are as follows: 1. : "Average", "Maximum", or "Minimum"
SURPAC Google Earth Linear and Graphic Functions
SURPAC Google Earth Linear and Graphic Functions Google Earth allows for the viewing of 2D or 3D colour satellite imagery for any point on the Earth, as well as being able to view galaxies and the ocean
Surfaces - Objectives
Surfaces - Objectives Cover the Basic DTM Point Types Creating a new InRoads Surface Surface processing in InRoads Loading 3D data into a Surface A bit about Surface Properties Overview of the View Surface
Instructions for Numbering and/or Reordering a Bibliography Roberta E. Sonnino, M.D., Judy Roberts, M.A.
Instructions for Numbering and/or Reordering a Bibliography Roberta E. Sonnino, M.D., Judy Roberts, M.A. STEP 1 CLEAN UP PARAGRAPHS IN YOUR CURRENT DOCUMENT Open the Word file that contains your bibliography
Case Study 1: Piezoelectric Rectangular Plate
Case Study 1: Piezoelectric Rectangular Plate PROBLEM - 3D Rectangular Plate, k31 Mode, PZT4, 40mm x 6mm x 1mm GOAL Evaluate the operation of a piezoelectric rectangular plate having electrodes in the
Transformation Range of Points: Add to Point Numbers: Overwrite Existing Point Numbers: Use New Point Numbers: Store in New CRD File:
Transformation This command allows you to translate, rotate, and/or scale points and linework in the current job. The Align option does all 3 (translate, rotate, scale) at once. Any point drawn on the
Pictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10
Pictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10 September 2013 Copyright 2010-2013 Pictometry International Corp. All rights reserved. No part of this publication may be reproduced,
Follow-Up on the Nueces River Groundwater Problem Uvalde Co. TX
Follow-Up on the Nueces River Groundwater Problem Uvalde Co. TX Analysis by Ryan Kraft 12/4/2014 1 Problem Formulation A reduction in discharge was detected at a gauging station along a portion of the
Pictometry for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10.3
for ArcGIS Desktop Local Guide For ArcGIS Desktop Version 10.3 June 2015 Copyright 2010-2015 International Corp. All rights reserved. No part of this publication may be reproduced, stored in a retrieval
Using Syracuse Community Geography s MapSyracuse
Using Syracuse Community Geography s MapSyracuse MapSyracuse allows the user to create custom maps with the data provided by Syracuse Community Geography. Starting with the basic template provided, you
a b c d e f Guided practice worksheet Questions are targeted at the grades indicated Areas and perimeters
2 14.1 14.2 Areas and perimeters 1 Work out the area of the following shapes. 8 cm 7 cm 11 cm......... d e f 6 cm 6 cm 10 cm 9 cm......... 2 Work out the area of the following shapes. a b c 3 mm 3 mm 10
v CMS-Flow SMS Tutorials Requirements Time Prerequisites Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This lesson demonstrates how to prepare a grid and run a solution using. Prerequisites SMS Overview Requirements Map Module Cartesian Grid Module Scatter Module Time
CCBC Math 081 Geometry Section 2.2
2.2 Geometry Geometry is the study of shapes and their mathematical properties. In this section, we will learn to calculate the perimeter, area, and volume of a few basic geometric shapes. Perimeter We
Start AxisVM by double-clicking the AxisVM icon in the AxisVM folder, found on the Desktop, or in the Start, Programs Menu.
4. MEMBRANE MODEL 1.1. Preprocessing with surface elements Start New Start AxisVM by double-clicking the AxisVM icon in the AxisVM folder, found on the Desktop, or in the Start, Programs Menu. Create a
Mar. 20 Math 2335 sec 001 Spring 2014
Mar. 20 Math 2335 sec 001 Spring 2014 Chebyshev Polynomials Definition: For an integer n 0 define the function ( ) T n (x) = cos n cos 1 (x), 1 x 1. It can be shown that T n is a polynomial of degree n.
ATNS. USING Google EARTH. Version 1
ATNS USING Google EARTH Version 1 ATNS/HO/Using Google Earth Page 1 25/04/2013 CONTENTS 1. BASIC SETUP 2. NAVIGATING IN GOOGLE EARTH 3. ADDING OBJECTS TO GOOGLE EARTH 4. USER HELP REFERENCES ATNS/HO/Using
AutoCAD 2009 Configuration for MUS
AutoCAD 2009 Configuration for MUS NOTE: The following steps do not apply to AutoCAD 2006 or earlier versions. These steps must be done before attempting to use MicroScribe Utility Software (MUS) with
OPERATION MANUAL FOR DTM & ORTHOPHOTO
BANGLADESH DIGITAL MAPPING ASSISTANCE PROJECT (BDMAP) OPERATION MANUAL FOR DTM & ORTHOPHOTO AUGUST 2011 VERSION 1 Introduction 1. General This Operation Manual is prepared by officers of Survey of Bangladesh
Multiframe Windows Version 16. User Manual
Multiframe Windows Version 16 User Manual Bentley Systems, Incorporated 2013 License & Copyright Multiframe Program & User Manual 2013 Bentley Systems, Incorporated iii Table of Contents License & Copyright...
Font Remix Tools Getting started
Font Remix Tools Getting started Note that there is only one version of the Font Remix Tools, which is compatible with both the Macintosh and Windows versions of FontLab Studio 5.02 or later. Python 2.3
v SMS 12.2 Tutorial Observation Prerequisites Requirements Time minutes
v. 12.2 SMS 12.2 Tutorial Observation Objectives This tutorial will give an overview of using the observation coverage in SMS. Observation points will be created to measure the numerical analysis with
EZ-Mill EXPRESS TUTORIAL 2. Release 13.0
E-Mill EPRESS TUTORIAL 2 Release 13.0 Copyright Notice This manual describes software that contains published and unpublished works of authorship proprietary to ECAM Solutions, Inc. It is made available
Touch pen Management Tool OPERATION MANUAL
LCD MONITOR Touch pen Management Tool OPERATION MANUAL Version 3.0 Applicable models (as of September 2017) PN-70TH5/PN-80TH5/PN-L705H/PN-L805H PN-ZL06 (Available models differ according to region.) Contents
AutoCAD 2009 Tutorial
AutoCAD 2009 Tutorial Second Level: 3D Modeling Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD 2009
MODFLOW - Conceptual Model Approach
GMS 7.0 TUTORIALS MODFLOW - Conceptual Model Approach 1 Introduction Two approaches can be used to construct a MODFLOW simulation in GMS: the grid approach or the conceptual model approach. The grid approach
Interface with. 3DMC Machine Control
Interface with 3DMC Machine Control Preamble In our experience software options are often only used in their simplest forms particularly when combined with data transfer. This document aims to uncover
Building level Rail embankments and correcting heights with XML. (V1.0) (Tangram)
Building level Rail embankments and correcting heights with XML. (V1.0) (Tangram) 1 This tutorial has been created to illustrate a few techniques in providing raised level embankments for railway lines
GMS 9.0 Tutorial MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 9.0 GMS 9.0 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map module to develop
Multiframe Oct 2008
Multiframe 11.01 3 Oct 2008 Windows Release Note This release note describes the Windows version 11.01 of Multiframe, Steel Designer and Section Maker. This release will run on Windows XP/2003/Vista/2008.
v SMS Tutorials ADCIRC LTEA Time minutes Prerequisites ADCIRC Tutorial Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives LTEA stands for the Local Truncation Error Analysis. The name refers to an analysis methodology for measuring local truncation error in a numerical analysis. The LTEA
Optimizing and smoothing contour curves for automated cutting using Rhino
Optimizing and smoothing contour curves for automated cutting using Rhino Contour curve data can be of highly variable quality depending on the original source. Much of the time the raw data is not suitable
UNIT 11: Revolved and Extruded Shapes
UNIT 11: Revolved and Extruded Shapes In addition to basic geometric shapes and importing of three-dimensional STL files, SOLIDCast allows you to create three-dimensional shapes that are formed by revolving
EXERCISE 2: GETTING STARTED WITH FUSION
Document Updated: May, 2010 Fusion v2.8 Introduction In this exercise, you ll be using the fully-prepared example data to explore the basics of FUSION. Prerequisites Successful completion of Exercise 1
Tutorial 1: Welded Frame - Problem Description
Tutorial 1: Welded Frame - Problem Description Introduction In this first tutorial, we will analyse a simple frame: firstly as a welded frame, and secondly as a pin jointed truss. In each case, we will
Tutorial (Beginner level): Orthomosaic and DEM Generation with Agisoft PhotoScan Pro 1.3 (without Ground Control Points)
Tutorial (Beginner level): Orthomosaic and DEM Generation with Agisoft PhotoScan Pro 1.3 (without Ground Control Points) Overview Agisoft PhotoScan Professional allows to generate georeferenced dense point