EIP Integration & Alliance Partner Solutions Training
|
|
|
- Mitchell Simon
- 6 years ago
- Views:
Transcription
1 EIP Integration & Alliance Partner Solutions Training Enabling EIP on MFPs XE Education & Learning
2 Enabling EIP on MFPs Table of Contents Overview 3 EIP Configurations 3 Enabling EIP on WorkCentre 7655 Family 4 Enabling EIP on WorkCentre 5632 Family 7 Enabling EIP on WorkCentre Pro 245 Family 11 Enabling EIP on WorkCentre 73xx Family 14 Enabling EIP on WorkCentre 72xx Family 148 Enabling EIP on WorkCentre 52xx Family 214 Page 2 version 07/05/2008
3 Enabling EIP on MFPs Overview The Extensible Interface Platform (EIP) is a set of extensibility interfaces that are supported on certain Xerox Office device platforms. This document gives detailed instructions on how to enable this feature on the compatible Xerox Office devices. EIP Configurations Products Type Min S/Ware Version Access to Custom Services UI type Install method WCP 2xx Custom Service Button ½ panel mono (4 bit gray) DLM WC 56xx All Custom Service Button WC 76xx Main Screen WC 73xx Main Screen WC 72xx Custom Service Button WC 52xx Custom Service Button ½ panel mono (4 bit gray) 800x600 (16 bit color) 800x600 (8 bit color) ½ panel mono (2 bit gray) ½ panel mono (2 bit gray) DLM DLM No DLM No DLM No DLM Page 3 version 07/05/2008
4 Enabling EIP on WorkCentre 7655 Family 1. Load install Custom Services.dlm if not already installed. Check configuration report under Installed Options for Custom Services, if present, dlm has been installed. The DLM is available for download from &prodid=wc7655_wc7665&xlang=en_us&xcntry=usa&pro dname=workcentre%207655/7665/7675 within the section of Firmware & Machine Upgrades. a. Navigate to Properties on the Device Web UI. b. Expand General Setup in the tree menu c. Expand Machine Software on the tree menu d. Select Manual upgrade. e. Use the browse button to find the installcustomservices.dlm and click Install Software. Page 4 version 1 31/03/2008
5 2. Enable SSL. a. Navigate to Properties on device WebUI. b. Expand General Setup in tree menu. c. Select Extensible Service Setup d. Select Settings for HTTP (SSL) Create or upload digital certificate by selecting Configure Digital Certificate link. Click radio button to enable SSL transport. Page 5 version 1 31/03/2008
6 3. Enable Web services required, at minimum enable the Extensible Service Registration web service. a. Navigate to Properties on Device web UI b. Expand General Setup c. Select Extensible Service Setup. Note: If this is still selected from step 2 above, the page may need to be refreshed in order to get back to the settings page. d. Select Settings for Extensible Service Registration. Enable at minimum the Extensible Service Registration. Page 6 version 1 31/03/2008
7 Enabling EIP on WorkCentre 5632 Family 1. Load install Custom Services.dlm if not already installed. Check configuration report under Installed Options for Custom Services, if present, dlm has been installed. The DLM is available for download from odid=wc5632_wc5638&xlang=en_us&xcntry=usa&prodname =WorkCentre%205632/5638 under WorkCentre 5632/5638 Firmware and machine upgrades. a. Navigate to Properties on the Device Web UI. b. Expand General Setup in the tree menu c. Expand Machine Software on the tree menu d. Select Manual Upgrade. e. Use the browse button to find the installcustomservices.dlm and click Install Software. Page 7 version 1 31/03/2008
8 2. Enable SSL. a. Navigate to Properties on device WebUI. b. Expand Connectivity c. Expand Protocols d. Select HTTP. Create or upload digital certificate by selecting Configure machine Digital Certificate link. Click radio button to enable SSL transport. Port can be changed as desired. Page 8 version 1 31/03/2008
9 Page 9 version 1 31/03/2008
10 3. Enable Custom Services a. Navigate to Properties on device WebUI. b. Expand Services c. Expand Custom Services d. Select Custom Services e. Select Enabled and click Apply. Page 10 version 1 31/03/2008
11 Enabling EIP on WorkCentre Pro 245 Family 1. Load install Custom Services.dlm if not already installed. Check configuration report under Installed Options for Custom Services, if present, dlm has not been installed. The DLM is available for download from under WorkCentre 245/255 Drivers and Downloads. a. Navigate to Properties on the Device Web UI. b. Expand Services in the tree menu c. Expand Machine Software on the tree menu d. Select Manual Upgrade. e. Use the browse button to find the installcustomservices.dlm and click Install Software. Page 11 version 1 31/03/2008
12 2. Enable SSL. a. Navigate to Properties on device WebUI. b. Expand Security c. Select SSL. Create or upload digital certificate by selecting Create New Certificate. Click check box to enable SSL transport. Port can be changed as desired. Page 12 version 1 31/03/2008
13 3. Enable Custom Services a. Navigate to Properties on device WebUI. b. Expand Services c. Expand Custom Services d. Select Custom Services e. Select Enabled and click Apply. Page 13 version 1 31/03/2008
14 Enabling EIP on WorkCentre 73xx Family 1. Check configuration report under System Settings for Controller+PS ROM Software Version. EIP Requires Controller Software Version or higher. Contact Xerox Support if a software upgrade is required 2. Enable SSL. a. Navigate to the Properties tab on the device WebUI. b. Expand Security c. Select Machine Digital Certificate Management to create or upload a digital certificate. Page 14 version 1 31/03/2008
15 d. Select SSL / TLS Settings. Click check box to enable HTTP SSL / TLS communication. Port number can be changed as desired. 3. Enable Custom Services. a. Navigate to the Properties tab on the device WebUI. b. Expand Services c. Expand Custom Services d. Select Custom Services e. Select Enabled and click Apply. Page 15 version 1 31/03/2008
16 4. Enable Scan Template Management. a. Navigate to the Properties tab on the device WebUI. b. Expand Services c. Expand Network Scanning d. Select Scan Template Management e. Select Enabled. 5. Enable FTP Client for Scan Template Management (if necessary). a. Navigate to the Properties tab on the device WebUI. b. Expand Connectivity c. Select Port Settings d. Click Check Box to enable FTP Client and click Apply. Page 16 version 1 31/03/2008
17 Page 17 version 1 31/03/2008
18 Enabling EIP on WorkCentre 72xx Family 1. Check configuration report under System Settings for Controller+PS ROM Software Version. EIP Requires Controller Software Version or higher. Contact Xerox Support if a software upgrade is required 2. Enable SSL. a. Navigate to the Properties tab on the device WebUI. b. Expand Security c. Select Machine Digital Certificate Management to create or upload a digital certificate. Page 18 version 1 31/03/2008
19 d. Select SSL / TLS Settings. Click check box to enable HTTP SSL / TLS communication. Port number can be changed as desired. 3. Enable Custom Services. a. Navigate to the Properties tab on the device WebUI. b. Expand Services c. Expand Custom Services d. Select Custom Services e. Select Enabled and click Apply. 4. Enable Scan Template Management. Page 19 version 1 31/03/2008
20 a. Navigate to the Properties tab on the device WebUI. b. Expand Services c. Expand Network Scanning d. Select Scan Template Management e. Select Enabled. 5. Enable FTP Client for Scan Template Management (if necessary). a. Navigate to the Properties tab on the device WebUI. b. Expand Connectivity c. Select Port Settings d. Click Check Box to enable FTP Client and click Apply. Page 20 version 1 31/03/2008
21 Enabling EIP on WorkCentre 52xx Family 1. Check configuration report under System Settings for Controller+PS ROM Software Version. EIP Requires Controller Software Version or higher. Contact Xerox Support if a software upgrade is required 2. Enable SSL. a. Navigate to the Properties tab on the device WebUI. b. Expand Security c. Select Machine Digital Certificate Management to create or upload a digital certificate. d. Select SSL / TLS Settings. Click check box to enable HTTP SSL / TLS communication. Port number can be changed as desired. Page 21 version 1 31/03/2008
22 3. Enable Custom Services. a. Navigate to the Properties tab on the device WebUI. b. Expand Services c. Expand Custom Services d. Select Custom Services e. Select Enabled and click Apply. 4. Enable Scan Template Management. a. Navigate to the Properties tab on the device WebUI. b. Expand Services Page 22 version 1 31/03/2008
23 c. Expand Network Scanning d. Select Scan Template Management e. Select Enabled. 5. Enable FTP Client for Scan Template Management (if necessary). a. Navigate to the Properties tab on the device WebUI. b. Expand Connectivity c. Select Port Settings d. Click Check Box to enable FTP Client and click Apply. Page 23 version 1 31/03/2008
24
Automatic registration of Drivve Image on a Xerox device
How do I install Drivve Image on a Xerox device? Knowledge base article #1057 Automatic registration of Drivve Image on a Xerox device In order to enable communication between a Xerox device and Drivve
Xerox WorkCentre 6655 Software Installation Instructions
Xerox WorkCentre 6655 Software Installation Instructions Upgrading Software for Xerox ConnectKey Technology A new firmware update containing the latest improvements is available for your ConnectKey-enabled
Xerox VersaLink Enhancement Read Me 1
Xerox VersaLink Enhancement Read Me Description of new features and enhancements to the products specified below. Release Date: October 5, 2018 Xerox VersaLink Enhancement Read Me 1 Contents Product Firmware
Xerox WorkCentre 3655 / 3655i Software Installation Instructions
Xerox WorkCentre 3655 / 3655i Software Installation Instructions Upgrading Software for Xerox ConnectKey Technology A new firmware update containing the latest improvements is available for your ConnectKey-enabled
Upgrading a device from an 071.xxx.xxx.xxxxx version to an 073.xxx.xxx.xxxxx version. How to determine your starting version
WorkCentre 7845/7855 Software Installation Instructions Upgrading a device from an 071.xxx.xxx.xxxxx version to an 073.xxx.xxx.xxxxx version How to determine your starting version These instructions use
Xerox VersaLink Enhancement Read Me
Xerox VersaLink Enhancement Read Me Description of new features and enhancements to the products specified. Release Date: March 20, 2018 Xerox VersaLink Enhancement Read Me 1 Contents Product Firmware
uniflow Embedded Applet for Xerox V1.1 Installation Manual
uniflow Embedded Applet for Xerox V1.1 Installation Manual Versioning Document Versioning Version Date Author(s) Reviewer(s) 2.0 22-Jul-2014 Business I.T. Systems Ltd Sebastian Husnik, Marja Pals, Thomas
Customer Release Notes
Release Date: July 21, 2009 Customer Release Notes Phaser 3435 System Software 1.70.02.63 General Release Software Release Details Important Purpose System Software Version Firmware Version 1.70.02.63
Version 1.1 March 22, Secure Installation and Operation of Your WorkCentre 4250/4260
Version 1.1 March 22, 2010 Secure Installation and Operation of Your WorkCentre 4250/4260 Secure Installation and Operation of Your WorkCentre 4250/4260 Purpose and Audience This document provides information
Xerox App Gallery App Gallery User Guide. Version 5.0 September P06709
Xerox App Gallery App Gallery User Guide Version 5.0 September 2018 702P06709 2018 Xerox Corporation. All rights reserved. Xerox, Xerox and Design, ConnectKey, VersaLink, AltaLink, Xerox Extensible Interface
Version 5.0 September P Xerox App Gallery. App Gallery User Guide
Version 5.0 September 2018 702P06709 Xerox App Gallery App Gallery User Guide 2018 Xerox Corporation. All rights reserved. Xerox, Xerox and Design, ConnectKey, VersaLink, AltaLink, Xerox Extensible Interface
Xerox Forms Manager App Administrator Guide. Version 1.0 August 2018
Xerox Forms Manager App Administrator Guide Version 1.0 August 2018 2018 Xerox Corporation. All rights reserved. Xerox, Xerox and Design, Xerox Extensible Interface Platform, ConnectKey, VersaLink, AltaLink,
Upgrading a device from an 072.xxx.xxx.xxxxx version to an 073.xxx.xxx.xxxxx version. How to determine your starting version
WorkCentre 7845/7855 Software Installation Instructions Upgrading a device from an 072.xxx.xxx.xxxxx version to an 073.xxx.xxx.xxxxx version How to determine your starting version These instructions use
- - - - Solution : Upgrade Machine Software (Firmware) From Version 061.xxx.xxx.xxxxx to Version 071.180.203.05402 CAUTION: Upgrading to software level 071.180.203.05402 changes the operating system on
Customer Tips. Scanning with TCP/IP in Novell 5.x, 6.x Using Web Templates. for the user. Purpose. Network Setup. Xerox Multifunction Devices
Xerox Multifunction Devices Customer Tips March 15, 2006 This document applies to these Xerox products: x WC Pro 232/238/245/ 255/265/275 x WC 232/238/245/255/ 265/275 WC Pro C2128/C2636/ C3545 x WC Pro
Xerox Healthcare MFP Solution
Xerox Healthcare MFP Solution Confirm Connection How to share patient information The Xerox Healthcare MFP Solution and the Share Patient Information app work with the Kno2 cloud service to connect the
Configuring 802.1X Settings on the WAP351
Article ID: 5078 Configuring 802.1X Settings on the WAP351 Objective IEEE 802.1X authentication allows the WAP device to gain access to a secured wired network. You can configure the WAP device as an 802.1X
Load Balancing Web Servers with OWASP Top 10 WAF in AWS
Load Balancing Web Servers with OWASP Top 10 WAF in AWS Quick Reference Guide V1.0.1 ABOUT THIS GUIDE This document provides a quick reference guide on how to load balance Web Servers and configure a WAF
Xerox VersaLink Enhancement Read Me
Xerox VersaLink Enhancement Read Me Description of new features and enhancements to the products specified below. Release Date: March 16, 2018 Xerox VersaLink Enhancement Read Me 1 Contents Firmware xx.22.41
Secure Installation and Operation of Your WorkCentre TM 232/238/245/255/265/275 or WorkCentre TM Pro 232/238/245/255/265/275
Secure Installation and Operation of Your WorkCentre TM 232/238/245/255/265/275 Purpose and Audience This document provides information on the secure installation and operation of a WorkCentre 232/238/245/255/265/275
Version 1.1 May 10, Secure Installation and Operation of Your WorkCentre 4265
Version 1.1 May 10, 2015 Secure Installation and Operation of Your WorkCentre 4265 Secure Installation and Operation of Your WorkCentre 4265 Purpose and Audience This supplemental guide provides information
SharePointBoost License Management Center Tutorial For SharePoint 2007
SharePointBoost License Management Center Tutorial For SharePoint 2007 The SharePointBoost License Management Center (LMC) provides a convenient way to manage the licenses of all SharePointBoost products
Device Registration Service. Installation Guide
Document Imaging Solutions Device Registration Service Installation Guide Nuance Device Registration Service Installation Guide Document Revision Date Revision List September 16, 2017 Updated for DRS 7.11
Address Postscript and DLM Vulnerabilities v1.1 03/07/12
1 Xerox Security Bulletin XRX12-003 Address Postscript and DLM Vulnerabilities Background Vulnerabilities exist that, if exploited, could allow remote attackers to insert arbitrary code into the device.
Device Registration Service
Document Imaging Solutions Device Registration Service Installation Guide Version 7.12 Contents Introduction... 3 Product features... 3 Device Registration Service Pre-Requisites... 3 Component prerequisites...
June Using Mopria with Xerox Devices Built on Xerox ConnectKey Technology User Guide
June 2014 Using Mopria with Xerox Devices Built on Xerox ConnectKey Technology User Guide 2014 Xerox Corporation. All rights reserved. Xerox, Xerox and Design, CentreWare, ColorQube, ConnectKey and WorkCentre
Xerox Connect App for Blackboard
Xerox Connect App for Blackboard Information Assurance Disclosure Additional information, if needed, on one or more lines Month 00, 0000 2018 Xerox Corporation. All rights reserved. Xerox,
Load Balancing Nginx Web Servers with OWASP Top 10 WAF in AWS
Load Balancing Nginx Web Servers with OWASP Top 10 WAF in AWS Quick Reference Guide V1.0.2 ABOUT THIS GUIDE This document provides a quick reference guide on how to load balance Nginx Web Servers and configure
Xeretec Scan to OneDrive Secure and Convenient
Xeretec Scan to OneDrive Secure and Convenient Seb Coles Senior Software Developer Xeretec April, 2017 Version 1.0.0 Copyright 2017 by Xeretec Ltd. All rights reserved. Document Preface The purpose of
Cisco SSL Encryption Utility
About SSL Encryption Utility, page 1 About SSL Encryption Utility Unified ICM web servers are configured for secure access (HTTPS) using SSL. Cisco provides an application called the SSL Encryption Utility
Xerox Security Bulletin XRX08-009
Software update address Network Controller vulnerability Background A vulnerability exists in the ESS/ Network Controller that, if exploited, could allow remote attackers execute arbitrary code via specially
Xerox AltaLink Product Enhancement Read Me
Xerox AltaLink Product Enhancement Read Me Description of new features and enhancements to the products specified below. Release Date: January 26, 2018 Xerox AltaLink Enhancement Read Me 1 Contents Firmware
Xerox VersaLink Enhancement Read Me
Xerox VersaLink Enhancement Read Me Description of new features and enhancements to the products specified below. Release Date: December 1, 2017 Xerox VersaLink Enhancement Read Me 1 Contents Product Firmware
Welcome to the e-learning course for SAP Business One Analytics Powered by SAP HANA: Installation and Licensing. This course is valid for release
Welcome to the e-learning course for SAP Business One Analytics Powered by SAP HANA: Installation and Licensing. This course is valid for release 9.0. 1 At the end of this course, you will be able to discuss
Visual Environments Projector Software Upgrade. Instruction Sheet INTRODUCTION
Visual Environments Projector Software Upgrade Instruction Sheet INTRODUCTION The upgrade package for a VEPSW projector is a single file, which comprises all the firmware and software needed to operate
Xerox Security Bulletin XRX12-011
Digital Signature of Software Upgrade Files v1.1 Background The Xerox products listed below were shipped without the ability to accept software upgrade files with digital signatures. The ability to accept
XEScan 1.1 to XEScan 1.5. Customer Upgrade Process
XEScan 1.1 to XEScan 1.5 Customer Upgrade Process Revision Date: Oct 2003 2 Table of Contents Table of Contents...3 1. Introduction...4 2. Upgrade Procedure XEScan Application...4 3. Upgrade Procedure
Secure Installation and Operation of Your
Secure Installation and Operation of Your WorkCentre 3655/3655i WorkCentre 5845/5855/5865/5865i/5875/5875i/5890/5890i WorkCentre 5945/5945i/5955/5955i WorkCentre 6655/6655i WorkCentre 7220/7220i/7225/7225i
Embedded for Xerox EPA-EIP Setup Guide
Embedded for Xerox EPA-EIP Setup Guide 2016 XRX-EPA-EIP-20160315 Equitrac Embedded for Xerox EPA-EIP Setup Guide Document History Date Description of Revision Changes March 15, 2016 Updated for Equitrac
1) Log in to Therap https://secure.therapservices.net/auth/login 2) From the dashboard, check to see if your profile is set to Internal.
Initiating a New Case Note How to Create a Case Note- Case Manager Steps that will be used in this How-To process. 1. Initiating a New Case Note 2. Entering Data on a Case Note 3. Submitting a Case Note
Cisco Unified IP Phone 7942/7945/7962/7965/7975 Firmware Upgrade from pre 8.3(3) to 9.3(1)
Cisco Unified IP Phone 7942/7945/7962/7965/7975 Firmware Upgrade from pre 8.3(3) to 9.3(1) Document ID: 116054 Contents Introduction Prerequisites Requirements Components Used Conventions Overview Conditions
Secure Access Authentication / Restriction of workflows based on User
Secure Access Authentication / Restriction of workflows based on User SMARTdocument Travel v5.0 with EIP Connect 2.0 Prepared by Anthony Vigliotti rev 1.0 January 2010 Table of Contents Enable Standard
Delegated Official Registration Delegated Official Registration
Delegated Official Registration Delegated Official Registration The following walk-thru will assist a user in registering to become a Delegated Official. EUS is only able to assist the account owner in
Customer Tips. Mac OS X Version 10.2.x PPD/Plugin Installation and Print Center Setup. for the user. Purpose. Prerequisites. Installing the PPD
Xerox Multifunction Devices Customer Tips May 19, 2006 This document applies to these Xerox products: x WC Pro 232/238/245/ 255/265/275 WC 232/238/245/255/ 265/275 WC Pro C2128/C2636/ C3545 x WC Pro 165/175
Scan to PC Desktop Professional v7.0 Orientation Guide
Scan to PC Desktop Professional v7.0 Orientation Guide Maximizing Your Productivity with Scanning and Your Xerox WorkCentre Pro Multifunction Device Topics Included Scanning to the Desktop Scanning to
Downloading and installing the Version 14 Update
Downloading and installing the Version 14 Update Multi user sites, take note! Please run this update on your server first. Failing to do so will lead to a problematic update experience. 1. When you open
Process Document Reporting for Campus Solutions: Run Your SQR_CSRPT. File Name Date Modified 5/29/2008 Last Changed by. Run Your SQR_CSRPT
File Name Date Modified 5/29/2008 Last Changed by ASDS Run Your SQR_CSRPT.doc Run Your SQR_CSRPT Last changed on: 5/29/2008 2:24 PM Page 1 of 31 Navigation 1. Click the Enterprise Applications link. Page
Locate your Advanced Tools and Applications
File Manager allows you to take full control of your website files. You can copy, move, delete, rename and edit files, create and remove directories, change file permissions and upload files from your
Supported operating systems: Microsoft Windows
System requirements Drivve Image Version 6 + 7 Knowledge base article #6590 For system requirements of older Drivve Image versions, please refer to the following document: System requirements Drivve Image
VIRTUAL CDROM - ISO HANDBOOK
VIRTUAL CDROM - ISO HANDBOOK 1 Introduction This handbook will show you how to manage ISO format CDROM templates (hereinafter called CDs ) in order to be able to: Reboot Gigas Cloud Servers with a CD.
SNC-HMX70. Version Upgrade Guide
SNC-HMX70 Version Upgrade Guide Rev 1.0.0 Dec 18, 2018 Sony Corporation Revision History # Date Version Changes and comments 1 2018/12/18 1.0.0 initial release 2 3 4 5 6 7 8 2 CONTENTS Introduction...
This document provides the steps that are necessary to integrate Dispatcher Phoenix with production print models. Current supported models are:
This document provides the steps that are necessary to integrate Dispatcher with production print models. Current supported models are: 1250 Series (bizhub PRESS 1250/1052, bizhub PRO 951) C1070 Series
Xerox Document Centre Setup Guide for FlowPort
1 r e t pa Ch 2 r e t pa Ch Xerox Document Centre Setup Guide for FlowPort This document is intended for use by FlowPort System Administrators when configuring the following Xerox Document Centres to scan
Load Balancing Web Servers with OWASP Top 10 WAF in Azure
Load Balancing Web Servers with OWASP Top 10 WAF in Azure Quick Reference Guide v1.0.3 ABOUT THIS GUIDE This document provides a quick reference guide on how to load balance Web Servers and configure a
CentreWare DP User Guide
CentreWare DP User Guide "Your Autopilot to Productive Printer Management" Version 4.0. CENTREWARE DP USER GUIDE 998, 999 by Xerox Corporation. All rights reserved. Copyright protection claimed includes
Polycom RealPresence Resource Manager System
[Type the document title] Upgrade Guide 8.0.1 October 2013 3725-72106-001C Polycom RealPresence Resource Manager System Polycom Document Title 1 Contents Contents Prepare for Polycom RealPresence Resource
CEU Online System, The Friday Center for Continuing Education, UNC-Chapel Hill How to Obtain Participant IDs for Awarding of CEUs
The Friday Center for Continuing Education has the responsibility of approving continuing education activities for which CEUs are recorded and maintained as a permanent record for individual participants.
IQSweb Reference G. ROSS Migration/Registration
ROSS Migration/Registration Contents IQSweb V3.0.1 ROSS Connection Requirements... 2 Test Agency Network Connectivity to ROSS... 3 FIREWALL Exceptions... 3 FIREWALL Exception Justification... 4 ROSS Interface
January Using Mopria with Xerox Devices Built on Xerox ConnectKey Technology User Guide
January 2015 Using Mopria with Xerox Devices Built on Xerox ConnectKey Technology User Guide 2015 Xerox Corporation. All rights reserved. Xerox, Xerox and Design, CentreWare, ColorQube, ConnectKey and
How to Configure the Cisco SPA303 and SPA504G as an AnyPhone Device: *** Note: The SPA303 does NOT support PoE, and the SPA504G DOES support PoE.
Note: A single Anyphone line has a maximum concurrent call capacity of 4 calls. Hardware capacity should also be taken into consideration. This means that Cisco SPA303 can handle up to 3 concurrent calls,
Fiery Installation Instructions for the WorkCentre 7300 Series
Fiery Installation Instructions for the WorkCentre 7300 Series This document describes how to install and set up the Fiery Network Controller for WorkCentre 7300 Series. IMPORTANT: The complete installation
OpenText RightFax 10.6
OpenText RightFax 10.6 Connector for Konica Minolta MFPs Administrator Guide Edition OpenText RightFax 10.6 Connector for Konica Minolta MFPs Thursday, July 31, 2014 Trademarks OpenText is a registered
Partner Side SMART Guide
Partner Side SMART Guide Table of Contents 1. Introduction... 3 2. Partner Registration Process... 3 3. Additional Form... 12 4. Scorecard... 13 5. View Buyer Profile... 14 Partner Side User Manual 31
Administrators Guide. Version 7.1
Administrators Guide Version 7.1 November 2015 RESTRICTED RIGHTS Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (C)(1)(ii) of the Rights in Technical
MusicTel-Net/Net+ Installation and Operation Manual
MusicTel-Net/Net+ Installation and Operation Manual NOTICE This manual is the MusicTel-Net/Net+ Installation and Operation Manual v2.0. All rights reserved. No part of this document may be reproduced or
digital innovation Experience the power of CopyCentre 232/238/245/255 WorkCentre 232/238/245/255 WorkCentre Pro 232/238/245/255
CopyCentre WorkCentre WorkCentre Pro copy print scan fax email Experience the power of digital innovation The heartbeat of your office Today s non-stop workplace requires superior software and exceptional
Content and Purpose of This Guide... 1 User Management... 2
Contents Introduction--1 Content and Purpose of This Guide........................... 1 User Management........................................ 2 Security--3 Security Features.........................................
Deliver and manage customer VIP POCs. The lab will be directed and provide you with step-by-step walkthroughs of key features.
SR L15 Hands-On Lab Description Protecting Corporate Networks with Symantec Validation and ID Protection At the end of this lab, you should be able to Technically present and answer questions from your
Easy UI Solution 2.1 Installation Guide
Easy UI Solution 2.1 Installation Guide Thank you for selecting our product. This guide is intended for System Administrators, and describes how to install Easy UI Solution 2.1 (hereafter referred to as
Xerox NDPS Solution Install Guide
Xerox NDPS Solution Install Guide The installation of the Xerox NDPS Solution for NetWare 5.x, 6.x, and OES 1.0 requires the local workstation to already have installed and configured the latest Novell
Preface. Fuji Xerox Co., Ltd. Preface. Note
Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. Microsoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in
Hypertext Transfer Protocol Over Secure Sockets Layer (HTTPS)
Hypertext Transfer Protocol Over Secure Sockets Layer (HTTPS) This chapter provides information about Hypertext Transfer Protocol over Secure Sockets Layer. HTTPS, page 1 HTTPS for Cisco Unified IP Phone
Version 1.3 Nov 09, Supplemental Guide -- Secure Installation and Operation of Your WorkCentre 7535/7556
Version 1.3 Nov 09, 2015 Supplemental Guide -- Secure Installation and Operation of Your WorkCentre 7535/7556 Supplemental Guidance - Secure Installation and Operation of Your WorkCentre 7535/7556 Purpose
Synapse Installation Guide
Synapse Installation Guide To install the Synapse system correctly, follow the Recommended Installation Sequence described on the following pages. If you have non-synapse devices that you want to attach
<Partner Name> RSA ARCHER GRC Platform Implementation Guide. Gurucul Risk Analytics. <Partner Product>
RSA ARCHER GRC Platform Implementation Guide Jeffrey Carlson, RSA Partner Engineering Last Modified: August 1 st, 2017 Solution Summary Gurucul is changing the way enterprises
Xerox ConnectKey WorkCentre Product Enhancement Read Me
Xerox ConnectKey WorkCentre Product Enhancement Read Me Description of new features and enhancements to the products specified below. Release Date: December 15, 2017 1 Contents Firmware 073.xxx.247.32400
DefensePro. Release Notes
DefensePro Release Notes Version 7.42.07 March 29, 2017 TABLE OF CONTENTS CONTENT... 3 RELEASE SUMMARY... 3 SUPPORTED PLATFORMS AND MODULES... 3 MANAGEMENT USING APSOLUTE VISION... 3 UPDATING THE ONLINE
Load Balancing Nginx Web Servers with OWASP Top 10 WAF in Azure
Load Balancing Nginx Web Servers with OWASP Top 10 WAF in Azure Quick Reference Guide v1.0.2 ABOUT THIS GUIDE This document provides a quick reference guide on how to load balance Nginx Web Servers and
The Applications and Gaming Tab - Port Range Forward
The Applications and Gaming Tab - Port Range Forward The Applications and Gaming Tab allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized
Scan to Quick Setup Guide
Xerox WorkCentre M118i Scan to E-mail Quick Setup Guide 701P42574 This guide provides a quick reference for setting up the Scan to E-mail feature on the Xerox WorkCentre M118i. It includes procedures for:
5. Media Playback Video Playback Basic functions
5. Media Playback 5.1. Video Playback 5.1.1. Basic functions 1. Menu Selection : In the Main menu, select MOVIE menu using the left/right button on the remote controller. 2. Select the storage : Select
Configuring Internet Explorer for CareLogic
Configuring Internet Explorer for CareLogic March 26, 2015 1 P a g e Table of Contents Configuring Internet Explorer for CareLogic... 3 Configuring Internet Explorer Security Settings... 4 Configuring
Xerox Workcentre 5955
Xerox Workcentre 5955 The Document Feeder and Glass Control Panel Waste Toner Machine Overview Top output tray 2,000 sheet stacker output tray Bypass Tray 1 Adjustable to 11x 17 Tray 2 Adjustable to 11x
Advanced Anywhere Print
Advanced Anywhere Print Installation and Configuration Guide Version 1.0 12020-10-UD1-002 This page is intentionally left blank. 2 Advanced Anywhere Print V1.0 Installation and Configuration Guide Contents
Configuring the network clients
3 Configuring the network clients Accessing the wireless router Setting an IP address for wired or wireless clients To access the ASUS Wireless Router, you must have the correct TCP/IP settings on your
UPGRADE GUIDE BrightSign Network Enterprise Edition 4.2 BrightSign, LLC Lark Ave. Suite B, Los Gatos, CA
UPGRADE GUIDE BrightSign Network Enterprise Edition 4.2 BrightSign, LLC. 16780 Lark Ave. Suite B, Los Gatos, CA 95032 408-852-9263 www.brightsign.biz TABLE OF CONTENTS Introduction... 1 What s New in BSNEE
Double-clicking an entry opens a new window with detailed information about the selected VPN tunnel.
The Barracuda NextGen Admin VPN tab provides information on all VPN connections that are configured on the Barracuda NextGen Firewall F-Series. Selecting the icons in the ribbon bar under the VPN tab takes
Working Folder Linkage Setup Guide
Working Folder Linkage Setup Guide Thank you for selecting our product. This guide describes how to install Working Folder Linkage to the machine. To install Working Folder Linkage, be sure to read this
DYNAMICS 365 BUSINESS PROCESS VISUALIZATION USING VISIO
MICROSOFT LABS JANUARY 10, 2019 DYNAMICS 365 BUSINESS PROCESS VISUALIZATION USING VISIO A Solution to create a Microsoft VISIO template by consuming the configured entity values from the CRM entity record.
Solutions and Connectivity Training Guides
Solutions and Connectivity Training Guides Configure Scan to SMB on a Mac 10.7 (Lion) Document version: 1.1 Originator: Steve Herbert Source: Konica Minolta FTP Site: Path: /Training_Handouts/Solutions_and_Connectivity/Training_Guides
Unity Loader V2.3 Readme
Unity Loader V2.3 Readme Table of Contents 1 SYSTEM REQUIREMENTS... 2 2 SETUP PROCEDURE... 2 2.1 Recommendations before installation... 2 2.2 Unity Loader Setup procedure... 2 2.3 Communication Drivers
Registering & Upgrading FW VIA Connect PRO
Registering & Upgrading FW VIA Connect PRO Registering VIA Connect PRO T You must install version 2.0.0716.774 before upgrading your VIA device to the latest patch/ firmware. This one-time registration
AutoStore 7.0 SP4 Installation Guide. Version 7.0 SP4
Document Imaging Solutions AutoStore 7.0 SP4 Installation Guide Version 7.0 SP4 Nuance AutoStore 7.0 SP4 Installation Guide Document Revision Date Revision List March 10, 2015 AutoStore 7.0 December 14,
Advanced Web Scanner Service
Advanced Web Scanner Service The existing Web Scanner mechanism was not supported by all the browsers and required changes in the methodology. The Advanced Web Scanner Service provides a more secure and
10/100Mbps 2Port USB2.0 MFP Server
10/100Mbps 2Port USB2.0 MFP Server Mini-MFP Quick Installation Guide English Ver.1.0 Quick Installation Guide CONTENTS STEP 1 / Mbps Port USB MFP Server Introduction Package Contents OS Requirements Physical
Installing and Configuring vcloud Connector
Installing and Configuring vcloud Connector vcloud Connector 2.5.0 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new
Procedure to Flash Upgrade the TLink TL250/TL300
Procedure to Flash Upgrade the TLink TL250/TL300 The following is a step-by-step guide to upgrade the software of a TL250 or TL300 IP communicator module. Step 1 Run the T-Link Console Software If you
Equitrac Integrated for Konica Minolta
Equitrac Integrated for Konica Minolta 1.2 Setup Guide 2014 Equitrac Integrated for Konica Minolta Setup Guide Document Revision History Revision Date Revision List August 9, 2013 Updated for Equitrac
How to use TLS in MyPBX
Version: V1.0 Date: August, 2013 Yeastar Information Technology Co. Ltd Content Introduction... 3 1. How to register IP phones to MyPBX via TLS... 3 1.1 ENABLE TLS IN MYPBX S WEB INTERFACE... 3 1.2 PREPARE