EC Type-Examination CERTIFICATE

declaration that the same application has not been submitted to any other registered body;

Short introduction Product certification can be requested by the manufacturer or the authorized agent of the manufacturer (importer) i.e. the applicant. Certification is carried out on the basis of a Module

Declaration of performance (DOP)

Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 001 DOP 2013-06-17 Multi-wall chimney system type DW-FU according to 2. Type, batch or serial number or any

Declaration of performance (DOP)

Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 002 DOP 2013-06-17 Multi-wall chimney system type DW-KL according to 2. Type, batch or serial number or any

Technical Report No for the conformity assessment according to the EMC Directive 2004/108/EC

Technical Report for the conformity assessment according to the EMC Directive 2004/108/EC, Article 7 and Annex III or respectively the EMC Law in the currently valid version Client: ABB Automation Products

Declaration of Performance (DOP)

Declaration of Performance (DOP) No. 9174 015 DOP 2018-01-08 1. Unique identification code of the product-type: Multi-wall chimney system type DW-ECO-TITAN according to 2. Type, batch or serial number

UDI in the MDR. Economic Operators The new regulations create Economic Operators who play a role in the UDI system.

UDI in the MDR The European Union intends to replace the existing directives related to medical device, Active Implantable Medical Devices, In Vitro Diagnostic Devices, and Medical Devices, with two regulations.

CERTIFICATION CENTER UB-Gİ-BP-001 GC CERTIFICATION PROGRAMME 1. OBJECTIVE

1. OBJECTIVE 1.1 The objective of this certification programme, referred to as Regulation hereafter, is to describe implementations which are to be enforced by the Electrotechnical Sector Directorate,

LED-Illumination with Control Unit Ident.-No

A HAAG-STREIT COMPANY MÖLLER-WEDEL OPTICAL GmbH, Rosengarten 10, D-22880 Wedel with Control Unit Ident.-No. 773 190 01 Valid from Hardware / Software Rev. / SN 1.0 IDENT.-NO. 217 321 09 Document Version

Marks associated with TUV SUD BABT Certification Schemes

TUV SUD BABT is a certification body of TUV SUD BABT 2017 BABT_AP014.docx Page 1 of 11 Contents 1. Introduction... 3 2. Definitions... 3 3. Overview of Schemes and Associated Marks... 3 4. Accreditation

Marks associated with TÜV SÜD BABT Certification Schemes

Marks associated with TÜV SÜD BABT Certification TÜV SÜD BABT is a certification body of TÜV SÜD BABT 2012 Date:23 April 2012 Page 1 of 15 Contents 1. Introduction... 4 2. Definitions... 4 3. Overview

(1) EC-TYPE-EXAMINATION CERTIFICATE (Translation) (2) Equipment and protective systems intended for use in potentially explosive atmospheres Directive 94/9/EC (3) EC-type-examination Certificate number

Marks Associated with TUV SUD BABT Certification Schemes

Marks Associated with TUV SUD BABT Certification Schemes TUV SUD BABT is a Certification Body of TUV SUD BABT 2018 BABT AP014 Page 1 of 11 Contents 1. Introduction...3 2. Definitions...3 3. Overview of

Quick Notes Page 1 Printout Thursday, April 12, 2018 9:45 AM CERTIFICATE No. P13217188 Order No. 233117 Page 1/1 Product Applicant Manufacturer Factory Ratings Trade mark Model / Type Ref. Principal

EC CERTIFICATE PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE. No issued to. Ansell Protective Solutions Lithuania, UAB

PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE No. 46 02 01 issued to Ansell Protective Solutions Lithuania, UAB Pramonesg. 5 K, Tauragé, LT-72328, Lithuania We hereby certify that an examination

CERTIFICATE AND MARK USAGE PROCEDURE

1 / 7 CERTIFICATE AND MARK USAGE PROCEDURE 1. Revision History Rev. No Date of Rev. Definition of Rev. Reason of Rev. 17 20.3.2018 General revision is made. Change of SZUTEST's logo. 16 7.8.2017 Updated

IECEx Certificate of Conformity

IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:

EC Type-Examination Certificate

Powered by TCPDF (www.tcpdf.org) EC Type-Examination Certificate Reg.-No.: 01/205/5192.02/18 Product tested Safety-Related Programmable Logic Controller Certificate holder Rockwell Automation, Inc. 1201

Product Testing, Inspection and Certification Regulations of TÜV Rheinland InterCert Kft.

Product Testing, Inspection and Certification Regulations of TÜV Rheinland InterCert Kft. Contents 1. Scope of Application 2. Contractual Bases 3. Testing Regulations 4. Certification Regulations 5. Inspection

ÉMI-TÜV SÜD. Regulation of product certification and use of ÉMI-TÜV SÜD KERMI. certification mark. ÉMI TÜV SÜD Ltd.

Regulation of product certification and use of ÉMI-TÜV SÜD KERMI certification mark ÉMI TÜV SÜD Ltd. KERMI Department Budapest, 01.09.2017. Notified Body 1417 KERMI Department Rn.: 13-09-072640 Tax nr:

NCS 8776 Certification scheme to NTA 8776

NCS 8776 Certification scheme to NTA 8776 RD_130, Issue 02 This guide describes the procedures and conditions for testing and certification used for conformity assessment within the NCS 8776 Certification

Signal processor MS96 for flow sensors MS96-11EX0-R/230VAC

MS96-11EX0-R/230VAC ATEX category II (1) G, Ex Zone 0 ATEX category II (1) D, Ex Zone 20 single-channel signal processor MS96 for connection of an intrinsically safe flow control sensor in zone 0 adjustment

Guidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External

Guidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External PREPARED BY: Head (MSCD) APPROVED BY: C.E.O PAGE : 1 OF 10 Table of Content 1.

BEETLE /Fusion Compact. Installation Guide

BEETLE /Fusion Compact Installation Guide The reproduction, transmission or use of this document or its contents is not permitted without express authority. Offenders will be liable for damages. All rights,

7 The Protection of Certification Marks under the Trademark Act (*)

7 The Protection of Certification Marks under the Trademark Act (*) In this research, I examined the certification and verification business practices of certification bodies, the use of certification

Description of the TÜV NORD CERT certification procedure GMP+ FC (Feed Certification scheme) of GMP+ International B.V. (NL)

Certific ation Table of contents 1 CERTIFICATION PROCEDURE... 3 1.1 Audit Preparation... 3 1.2 Establishment of readiness for certification... 3 1.3 Temporary approval... 3 1.4 Audit Stage 2 Certification

Qingdao Haier Air Conditioner Gen. Corp., Ltd. Haier Industrial Park, Laoshan District, Qingdao Shandong , P.R. China

The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Qingdao Haier Air Conditioner Gen. Corp., Ltd. Haier Industrial Park, Laoshan District, Qingdao Shandong

The appendix to the certificate is part of the certificate and consists of 3 pages.

The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified

Operating Instructions

Operating Instructions KBDi-DS102W-xxx R. STAHL HMI Systems GmbH Adolf-Grimme-Allee 8 D 50829 Köln Operating Instructions Version: 01.00.05 Issue date: 19.09.2018 Disclaimer Disclaimer Publisher and copyright

TEST REPORT IEC Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements

Test Report issued under the responsibility of: TEST REPORT IEC 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements Report Number....

Uncertified Translation Physikalisch-Technische Bundesanstalt Braunschweig und Berlin (1) EC Type Examination Certificate (2) Equipment and Protective Systems Intended for Use in Potentially Explosive

Read Me First for the HP ProCurve Wireless Products - software ver

Read Me First for the Wireless Products - software ver. 2.1.0 This Read Me First provides information for the following products: Wireless Access Point 520wl (J8133A) 802.11a AP Kit 160wl - N America +

IT Supplier Portal Help Manual

IT 1/9 Contenido de este manual Introduction.... 2 How the portal works... 3 If you enter for the first time:... 4 Warning of new document available:... 4 Establish a download reservation.... 6 View article

NZQF NQ Ref 1093 Version 3 Page 1 of 10. This qualification has been reviewed. The last date to meet the requirements is 31 December 2022.

NZQF NQ Ref 1093 Version 3 Page 1 of 10 National Certificate in Electronic Engineering (Level 3) Level 3 Credits 117 This qualification has been reviewed. The last date to meet the requirements is 31 December

Green Council Ltd Green Council Certification Scheme (GCCS)

1.0 Introduction Use of GC s 1.1 Organizations certified by Green Council Ltd (GC) management system certification schemes are entitled to use the GC s in accordance with the following conditions. 1.2

The appendix to the certificate is part of the certificate and consists of 3 pages.

The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Dt. Rentenversicherung Rheinland Königsallee 71 40194 Düsseldorf, Germany to confirm that its trust

The appendix to the certificate is part of the certificate and consists of 3 pages.

The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified

MANAGEMENT SYSTEM CERTIFICATION BODY PT. INTERNATIONAL CERTIFICATION SERVICES QUALITY MANUAL RULES FOR USE OF LOGOS AND CERTIFICATION MARKS

Page 1 / 10 1. Scope 1.1 These guidelines contain provisions for using the International Certification Services (ICS) Logo, hereinafter referred to ICS logo to be used by companies / institutions / agencies

This qualification has been reviewed. The last date to meet the requirements is 31 December 2015.

NZQF NQ Ref 0534 Version 4 Page 1 of 15 National Diploma in (Level 6) with strands in Mechanical, Production, and Mechanical Services, and with an optional strand in Practical Endorsement Level 6 Credits

Certification program PCWU-3

The certification program of utility products type 3 of the certification program according to PN-EN ISO/IEC 17067 Number: Page: 1 z 8 MS-0013527 Is valid from: 01.03.2016 Prepared: Tomasz Marcinek Approved:

UEEE and WEEE Classification. Marina de Gier, IMPEL Waste & TFS Singapore 24 th November

UEEE and WEEE Classification Marina de Gier, IMPEL Waste & TFS Singapore 24 th November Introduction Legislation Distinction UEEE and WEEE WEEE classification Three main regulations: Legislation 1. Waste

Petroleum Mechanic Certification Program Policies and Procedures

Certification Program Revisions Effective: June 11, 2015 Document Uncontrolled if Printed Table of Contents 1. Background... 3 2. Certificate Requirements... 4 3. Training Standards... 4 4. Practical Skills/Experience

List of forms CLAP/WGP by subject /68/UE

List of forms CLAP/WGP by subject - 2014/68/UE Subject Assembly - Assembly including an item of pressure equipment placed on the market before 29 May 2002 in compliance with national pre-ped regulations

The appendix to the certificate is part of the certificate and consists of 3 pages.

The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified

USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY

Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION

SQF 1000 Certificate Trade Mark

SQF 1000 Certificate Trade Mark Rules for Use 4th Edition NOVEMBER 2005 Safe Quality Food Institute 2345 Crystal Drive, Suite 800 Arlington, VA 22202 USA 202-220-0635 www.sqfi.com SQF Institute is a division

The appendix to the certificate is part of the certificate and consists of 3 pages.

The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified

Intelligent Valve Controller NDX. Safety Manual

Intelligent Valve Controller NDX Safety Manual 10SM NDX en 5/2017 2 Intelligent Valve Controller NDX Safety Manual Table of Contents 1 General information...3 1.1 Purpose of the document... 3 1.2 Description

A Guide to the TÜV SÜD BABT Implementation of the Construction Products Directive (89/106/EEC)

BABT 793 A Guide to the TÜV SÜD BABT Implementation of the Construction Products Directive (89/106/EEC) TÜV SÜD BABT is a certification body of BABT 2012 Issue 1 Foreword TÜV SÜD BABT is an accredited

Documentation ZB8610. Fan cartridge for EtherCAT and Bus Terminals. Version: Date:

Documentation Fan cartridge for EtherCAT and Bus Terminals Version: Date: 1.5 2017-08-07 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1.2 Safety instructions...

EC Declaration of Conformity

P1000, P1100, P1200 LED Displays Generic Housed P7000 LED Displays Generic Main Boards EN 50121-4 :2006 +AC:2008 EN 61000-6-2 :2005 +AC:2005 EN 61000-6-4 :2007 +A1:2011 EN 61000-3-2 :2006 +A2:2009 EN 61000-3-3

CERTIFICATE. Issued Date: Aug. 16, 2012 Report No.: R-ITCEP07V03

CERTIFICATE Issued Date: Aug. 16, 2012 Report No.: 123048R-ITCEP07V03 This is to certify that the following designated product Product : HMI (Human Machine Interface) Trade name : EasyView, WeinView, Weintek

YJ Carat and Gold Scales

99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com YJ Carat and Gold Scales Instruction Manual EN-2 YJ Series YJ Scale Mark Standard

Ongoing conformance of the product with the standard is the responsibility of the certificate holder and the Australian manufacturer or importer.

1. Preface The (TECS) offered by Comtest Certification Body is based on a type test scheme, which is one where a representative sample is provided for testing and certification, and does not include any

Interpreting INAB Scopes of Accreditation.

Accreditation The accreditation process determines, in the public interest, the technical competence and integrity of organisations offering testing, examination, verification, inspection, calibration

Rules for LNE Certification of Management Systems

Rules for LNE Certification of Management Systems Application date: March 10 th, 2017 Rev. 040716 RULES FOR LNE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE... 3 2. SCOPE... 3 3. DEFINITION

BORSIG GmbH Egellsstraße Berlin Germany

CERTIFICATE Management system as per DIN EN ISO 9001 : 2008 In accordance with TÜV NORD CERT procedures, it is hereby certified that BORSIG GmbH Egellsstraße 21 13507 Berlin Germany with the locations

Interpretation document CPR

Interpretation document CPR RD_090, Issue 13 This guide describes the conformity assessment procedures and requirements for products under the scope of the Construction Products Regulation when placing

It s a safe world after all

Training Course and Examination TÜV Functional Safety Engineer Safety Instrumented Systems IEC 61508 and 61511 Safety Assurance and Consultancy TÜV Rheinland Functional Safety Program course provider for

In-Vitro Diagnostic Directive (IVDD) and IVDD Technical File Preparation Workshop. 3-4 July 2014 TÜV SÜD

In-Vitro Diagnostic Directive (IVDD) and IVDD Technical File Preparation Workshop 3-4 July 2014 TÜV SÜD Introduction The In-Vitro Diagnostic Directive (IVDD) 98/79/EC applies to all In-Vitro Diagnostic

RECOMMENDATION FOR USE

Page 1 of 6 TITLE CONTENT OF THE TECHNICAL FILE ORIGINATOR NB-RAIL STRATEGY SG SUBJECT RELATED TO Directives 2008/57/EC, 2009/131/EC, 2011/18/EU, Recommendation 2011/217/EU, Decision 2010/713/EU and all

INAB Mandatory and Guidance Documents Policy and Index

INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such

Fast-Track Waste Shipment Notifications

Fast-Track Waste Shipment Notifications Making legal waste shipments faster & easier Freeing up resources to combat real illegal waste shipments Chris Slijkhuis Müller-Guttenbrunn Group 2 Of a true circular

Certificate of Approval SAA EA LED Power Supply (Independent SELV, Constant Current) Model No.: EIP009C0200LSD1L

14 March 2017 C/- TUV Rheinland (Guangdong) Ltd Dear Sir Certificate of Approval SAA-170417-EA We are pleased to advise that your application for certification of the above electrical product has been

RECOMMENDATION FOR USE

Page 1 of 23 TITLE CONTENT OF EC CERTIFICATE/ QMS-APPROVAL/ ISV ORIGINATOR NB-RAIL SUB-GROUP STRATEGY SUBJECT RELATED TO DIRECTIVE 2008/57/EC (AS AMENDED BY 2009/131/EC, 2011/18/EU, 2010/713/EU, 2013/9/EU,

SANnet II Family Safety, Regulatory, and Compliance Manual

SANnet II Family Safety, Regulatory, and Compliance Manual March 2005 83-00002666, Revision F Copyright Copyright 2001-2005 Dot Hill Systems Corp. All rights reserved. No part of this publication may be

Installation Guide. QBox-V6. Standalone/Spare V6 SDI QBox. Standalone/Spare V6 SDI QBox. Part No. A

Installation Guide Standalone/Spare V6 SDI QBox QBox-V6 Standalone/Spare V6 SDI QBox Part No. A9009-0004 EN www.autocue.com Copyright 2017 All rights reserved. Original Instructions: English All rights

M E M O R A N D U M I.S.

Physikalisch-Technische Bundesanstalt Department 3.6 " Intrinsic safety and Safety of Systems" 38023 Braunschweig Germany P.O. Box 33 45 Tel. ++49 531 592-3630 Fax ++49 531 592-3605 M E M O R A N D U M

User Guide Rollerdor RD55 and RD77 Roller Garage Doors

User Guide Rollerdor RD55 and RD77 Roller Garage Doors REMOTE CONTROL UNIT (HOLD TO RUN) OPERATION BY HANDSET To open the roller garage door, press and release the top left (triangle) button on the remote

Electronic Temperature Controller. Instruction Manual Version

Electronic Temperature Controller 701 Instruction Manual Version 1.00.01 Dear Customer, we have made up this operating manual in such a way that all necessary information about the product can be found

Plumbers, Gasfitters and Drainlayers Board (Plumbing Registration and Licensing) Notice Notice

Plumbers, Gasfitters and Drainlayers Board (Plumbing Registration and Licensing) Notice 2010 Pursuant to sections 28 and 30 of the Plumbers, Gasfitters, and Drainlayers Act 2006 ( the Act ), the following

Solutions that ensure safety, reliability and compliance.

RED Transition and Implementation by TÜV SÜD Radu Gosav, Senior Manager EMC&RF, Greater China Solutions that ensure safety, reliability and compliance. TÜV SÜD Greater China Slide 1 17-02-22 1 RED Introduction

ishrt USB ishrt USBeX the Bluepack User Manual

ishrt USB ishrt USBeX the H@rt Bluepack User Manual Content 1. Certificate of conformity...1 2. ishrt USB and ishrt USBeX...4 2.1. Technical details...5 2.2. Delivery content...5 3. the H@rt Bluepack...6

Technical Specification & Warranty mypos Europe Ltd. mypos Mini EN

Technical Specification & Warranty mypos Europe Ltd. mypos Mini EN CONTENTS Supported connections... 2 Certifications & EMV... 3 mypos Mini specification... 4 Safety instructions... 5 General safety information...

POLICY FOR RENEWING A PRACTISING CERTIFICATE

POLICY FOR RENEWING A PRACTISING CERTIFICATE Policy for Renewing Practising Certificates Purpose To enable efficient, safe and consistent processing of renewal applications to the Occupational Therapy

AS-i Safety Relay Output Module with Diagnostic Slave

AS-i Safety Relay Output Module with Diagnostic Slave User Manual Revision date: 2013-01-30...supports the requirements for AS-i Safety up to SIL3 Subject to modifications without notice. Generally, this

Federal Communications Commission Declaration of Conformity

Series Series Copyright 2008. Acer Incorporated. All Rights Reserved. Aspire one Series Original Issue: 06/2008 This company makes no representations or warranties, either expressed or implied, with respect

Section I. GENERAL PROVISIONS

LAW OF THE RUSSIAN FEDERATION NO. 5151-1 OF JUNE 10, 1993 ON CERTIFICATION OF PRODUCTS AND SERVICES (with the Additions and Amendments of December 27, 1995, March 2, July 31, 1998) Federal Law No. 154-FZ

in the underlying contexts of use. The requirements and contexts of use are summarized in the appendix to the certificate.

The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Qingdao Haier Joint Stock Co., Ltd. Qianwangang Road, Haier Industrial Zone, Qingdao, Shandong 266510,

Hohenstein Laboratories GmbH & Co. KG Schloss Hohenstein Boennigheim Germany

Certification Body Products Hohenstein Laboratories GmbH & Co. KG Schloss Hohenstein 74357 Boennigheim Germany File: APPLICATION for award of the GS safety mark for a HuPF assessment (for products) for

Zener Barriers Bulletin 937Z

Technical Data Zener Barriers Bulletin 937Z Topic Page Introduction 2 Mounting 2 Housing 3 Operating Principle 3 Specifications 6 Introduction Allen-Bradley Zener barriers are a cost-effective solution

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung Ausweis-Nr. / Certificate No. 40012176 Blatt / page 2 Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder

Technical Specification & Warranty mypos Europe Ltd. mypos Mini Ice EN

Technical Specification & Warranty mypos Europe Ltd. mypos Mini Ice EN CONTENTS Supported connections... 2 Certifications & EMV... 2 D220 specification... 3 Safety instructions... 5 General safety information...

Autoadapt Remote. Autoadapt. App controlled receiver. User manual

Autoadapt Remote Autoadapt App controlled receiver EN User manual 2 Autoadapt Remote App controlled receiver Thank you for choosing an Autoadapt Remote! The following manual is an important part of the

Certification Application for the Certification of NDT Personnel Acc. to DIN EN ISO 9712

for NDT-Personnel Certification Application for the Certification of NDT Personnel Acc. to DIN EN ISO 9712 A. Details of candidate / person to be certified Name...... surname, first name title Address......

Report. Certificate M6A SIMATIC S7 Distributed Safety

Report to the Certificate M6A 17 05 67803 014 Safety-Related Programmable Systems SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision 3.1 dated

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision

DIGITALSIGN - CERTIFICADORA DIGITAL, SA.

DIGITALSIGN - CERTIFICADORA DIGITAL, SA. TIMESTAMP POLICY VERSION 1.1 21/12/2017 Page 1 / 18 VERSION HISTORY Date Edition n.º Content 10/04/2013 1.0 Initial drafting 21/12/2017 1.1 Revision AUTHORIZATIONS

TERMS AND CONDITIONS

TERMS AND CONDITIONS EDMF Language Services Kft. (hereinafter referred to as: EDMF Kft.), as the operator of the website under domain name www.edmf.com (hereinafter referred to as: Website), hereby publishes

Regulations for Compulsory Product Certification

Regulations for Compulsory Product Certification Chapter I General Provisions Article 1 Based on relevant laws and regulations covering product safety licensing and product quality certification so as

UL TYPE EXAMINATION CERTIFICATE Low Voltage Directive 2014/35/EU

00-IC-F0468 Issue #: 6.0_LVD Page 1/14 Applicant Manufacturer Product Sample Description WAAREE ENERGIES LTD 602, Western Edge-I, Off. Western Express Highway, Borivali(E), Mumbai 400066, Maharashtra,

Mouse with Bluetooth wireless technology. SPM6950. EN User manual. Register your product and get support at

Register your product and get support at www.philips.com/welcome Mouse with Bluetooth wireless technology SPM6950 EN User manual Philips Consumer Lifestyle AQ95-56F-1239KR 2010...... (Report No. / Numéro

Regulatory Aspects of Digital Healthcare Solutions

Regulatory Aspects of Digital Healthcare Solutions TÜV SÜD Product Service GmbH Dr. Markus Siebert Rev. 02 / 2017 02.05.2017 TÜV SÜD Product Service GmbH Slide 1 Contents Digital solutions as Medical Device

*Proximity is defined as a distance of three meters or less from a primary conductor with a voltage of 750 volts or greater.

UTILITY ARBORIST Occupation Description means a person who undertakes any work required to prune or clear vegetation in proximity* to energized electrical equipment, structures and conductors or who in

Gdańsk, DECEMBER 2017

Principles of using management systems certification marks December 2017 were approved by the Manager of the Management Systems Certification Bureau of Polish Register of Shipping on 1 December 2017. On

IECEx Certificate of Conformity

INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.: IECEx ITA 14.0009X Issue No:

Content of mandatory certificates

Chapter: 2.5.1 Conformity assessment procedures; General rules Text:... Key words: certificate, certificate of competence, 1. Purpose The purpose of this recommendation is to provide guidance on the minimum

National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4

NZQF NQ Ref 0124 Version 6 Page 1 of 12 National Certificate in Heating, Ventilating, and Air Conditioning (Mechanical Services) (Level 4) Level 4 Credits 254 This qualification has been reviewed. The

Technical Standards and Safety Authority. Policies and Procedures: Record of Training Policy Document

Technical Standards and Safety Authority Policies and Procedures: Record of Training Policy Document Table of Contents Policies and Procedures Introduction...1 Background and Intent...1...1 Instructor

Are you ready for Electrical Safety Testing?

Are you ready for Electrical Safety Testing? A short guide to preparing for safety itesting of electrical and electronic products Alastair McLaughlin TÜV SÜD Product Service Slide 1 Who am I? Name Alastair

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision