EC CERTIFICATE PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE. No issued to. Ansell Protective Solutions Lithuania, UAB

Size: px
Start display at page:

Download "EC CERTIFICATE PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE. No issued to. Ansell Protective Solutions Lithuania, UAB"

Transcription

1 PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE No issued to Ansell Protective Solutions Lithuania, UAB Pramonesg. 5 K, Tauragé, LT-72328, Lithuania We hereby certify that an examination of the company s production quality system has been carried out following the requirements of article 11b in Directive 89/686/EEC on personal protective equipment, and that the production quality system conforms with the requirements regarding production of items scheduled in this certificate. The Council Directive 89/686/EEC is implemented in Swedish Law by the national regulation AFS 1996:07 This certificate applies to activities performed at Pramonesg. 5 K, Tauragé, LT-72328, Lithuania This certificate was originally issued on 19th February 2007 and remains valid until 19 th February 2019, provided that the conditions set out in page 2 are fulfilled. Certification - Notified Body No Lennart Månsson Certification Manager Lennart Aronsson Certification Officer Certificate no , issue no 6, 19th February 2016, page 1(5)

2 Conditions Validity The certificate will remain valid until the expiry date, and allows the holder to use SPs notified body identification number 0402 in conjunction with the CE-mark, on products covered by this certificate, provided that the conditions stated below are fulfilled: - that surveillance audits are performed, with approved result; - that the company notifies SP on all modifications in the EC Type Examination Certificates covered; - that the company notifies SP on all significant changes in the quality assurance system, in its activities and/or organization - that the certificate is not used in a misleading manner, e.g. in marketing activities. Basis for certificate In accordance with Directive 89/686/EEC, article 11b, - The documentation presented has been examined and assessed by SP; - Audits of the quality assurance system at the company s premises in Tauragé has been performed - SP file 5P05290 Surveillance SP will perform surveillance inspections to ensure that the company maintains and applies the quality system that is subject of the certificate. Miscellaneous Additional conditions appear in Terms and conditions for audit and assessment of management systems as notified body and in Agreement concerning continuous inspection between Ansell Protective Solutions Lithuania, UAB and SP. Certificate history Issue Date Activity 1 19 th February 2007 Certificate issued 2 25 th June 2010 Certificate revised and product list extended th February 2012 Certificate revised, product list updated, validity extended for another 3 years 4 18 th October 2013 Certificate revised, product list updated, company name changed 5 19 th February 2015 Certificate revised, product list updated, validity extended for one year 6 18 th February 2016 Certificate revised, product list updated, validity extended for three years Certificate no , issue no 6, 19th February 2016, page 2(5)

3 Register of Products/EC Type Examination Certificates covered by the certificate A. Trellchem chemical protective clothing Product Approval Certificate Date of issue Gastight protection Evo type T and T-ET Type 1b EN Evo type CV/VP1 and -ET VPS Flash type T and T-ET VPS Flash type CV/VP1 Type 1b EN Typ 1a EN VPS type T and T-ET Type 1b EN VPS type CV/VP1 AIR type T and T-ET Type 1b EN AIR type CV/VP1 and -ET Super type T and T- ET Super type CV/VP1 Type 1b EN Super Freeflow Type 1c EN DK-0200-PPE-1820 ver DK-0200-PPE-1815 ver DK-0200-PPE-2060 ver DK-0200-PPE-2059 ver DK-0200-PPE-1884 ver DK-0200-PPE-1972 ver DK-0200-PPE-2261 ver DK-0200-PPE-2255 ver DK-0200-PPE-2062 ver DK-0200-PPE-2061 ver DK-0200-PPE-1622 ver Certificate no , issue no 6, 19th February 2016, page 3(5)

4 Product Approval Certificate Date of issue Light type T Type 1b EN DK-0200-PPE-1943 ver Light type CV/VP1 DK-0200-PPE-1942 ver Light Freeflow Type 1c EN DK-0200-PPE-1692 ver NEO type CV/VP1 DK-0200-PPE-1856 ver Liquid splash protection Splash 600 Type 4 EN DK-0200-PPE-1785 ver Splash 900 Type 3 EN DK-0200-PPE-1782 ver Splash 1000 Type 3 EN DK-0200-PPE Splash 1000S Type 4 EN DK-0200-PPE-1784 ver Splash 1500 Type 4 EN DK-0200-PPE-2240 ver " Splash 2000 Type 3 EN DK-0200-PPE-1783 ver Combined respiratory and liquid splash protection Splash 2000P Type 3 EN TH3P EN 12941*) Freeflow Hood Type PB(3) EN class 4A EN Mask Hood Type PB(3) EN DK-0200-PPE-1791 ver A/09/34 PSA Rev DK-0200-PPE-1917 ver Certificate no , issue no 6, 19th February 2016, page 4(5)

5 B. Viking dry diving suits Product Approval Certificate Issued HDS 12090COS01rev HDS DD 12090COS02rev HD 12104HVS01rev DD 12090COS03rev PRO EN Dry suit with biological protection 12105AZS01rev PROTECH BE Navy 12106GJS02rev HAZTECH 12021HAS01rev Certificate no , issue no 6, 19th February 2016, page 5(5)

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company SK ID Solutions AS Pärnu avenue 141 11314 Tallinn, Estonia to confirm that its trust service EID-SK

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified

More information

EC Certificate Full Quality Assurance System

EC Certificate Full Quality Assurance System 241154-2017-CE-ITA-NA-PS Rev. 0.0 PRJC-403782-2012-MSL-ITA 14 December 2019 This is to certify that the quality system of: ANGELANTONI LIFE SCIENCE SRL For design, production and final product inspection/testing

More information

DNV BUSINESS ASSURANCE

DNV BUSINESS ASSURANCE DNV BUSINESS ASSURANCE PRODUCTION QUALITY MANAGEMENT CERTIFICATE - EC Certificate No. 6139-2015-CE-USA-ACCREDIA This certificate consists of 3 pages. This is to certify that the quality management system

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified

More information

CERTIFICATE AND MARK USAGE PROCEDURE

CERTIFICATE AND MARK USAGE PROCEDURE 1 / 7 CERTIFICATE AND MARK USAGE PROCEDURE 1. Revision History Rev. No Date of Rev. Definition of Rev. Reason of Rev. 17 20.3.2018 General revision is made. Change of SZUTEST's logo. 16 7.8.2017 Updated

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Asseco Data Systems S.A. Certum CA, ul. Bajeczna 13 71-838 Szczecin, Poland to confirm that its trust

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its trust service D-TRUST qualified

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company FNMT Real Casa de la Moneda C/Jorge Juan, 106 28009 Madrid, Spain to confirm that its trust service

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its trust service D-TRUST qualified

More information

PRODUCTION QUALITY ASSURANCE CERTIFICATE. Initial date: 26 May, 2015

PRODUCTION QUALITY ASSURANCE CERTIFICATE. Initial date: 26 May, 2015 DNV GL PRODUCTION QUALITY ASSURANCE CERTIFICATE Certificate No.: 12403-2018-CE-USA-ACCREDIA This certificate consists of 2 pages Initial date: 26 May, 2015 Valid: 14 May, 2018-13 May, 2021 This is to certify

More information

Ref No: RACS/PCS/10 Page 1 of 7. Revision No: 00 Revision Date: October 1, 2018 PRODUCT CERTIFICATION SCHEME FOR ELECTRICAL EQUIPMENT

Ref No: RACS/PCS/10 Page 1 of 7. Revision No: 00 Revision Date: October 1, 2018 PRODUCT CERTIFICATION SCHEME FOR ELECTRICAL EQUIPMENT Ref No: RACS/PCS/10 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Electrical

More information

PRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM

PRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM Ref No: RACS/PCS/20 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Metrology System

More information

An unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail.

An unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail. An unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail. Consolidated version of The Swedish Board for Accreditation

More information

-2-4. Application for certificate of production system standard under regulated criteria at certification bodies that registered with the Food and

-2-4. Application for certificate of production system standard under regulated criteria at certification bodies that registered with the Food and (Unofficial) Announcement of the Food and Drug Administration Re: Application for Certificate of Production System Standards under Regulated Criteria ---------------------------------------------------

More information

Voluntary certification at an intermediate stage of manufacture

Voluntary certification at an intermediate stage of manufacture Chapter: 2.15 Other Text: Key words: MDD results of any assessment and verification operation, which where appropriate have been carried out in accordance with this Directive at an intermediate stage of

More information

Certificate. Certificate number: Certified by EY CertifyPoint since: July 10, 2018

Certificate. Certificate number: Certified by EY CertifyPoint since: July 10, 2018 Certificate Certificate number: 2018-016 Certified by EY CertifyPoint since: July 10, 2018 Based on certification examination in conformity with defined requirements in ISO/IEC 17065:2012 and ETSI EN 319

More information

Certification Scheme

Certification Scheme Certification Scheme Sustainable Biomass according to ISCC certification system (Edition: January 2017) DIN CERTCO Alboinstraße 56 12103 Berlin Tel: +49 30 7562-1131 Fax: +49 30 7562-1141 E-Mail: info@dincertco.de

More information

AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY

AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY Requirement specification Certification of individuals: AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY Requirement specification Auditor Lead Auditor rev 5.docx Page 1 1 Introduction

More information

Inhalt. Description of Certification Procedure ISO 22000, HACCP and DIN 15593

Inhalt. Description of Certification Procedure ISO 22000, HACCP and DIN 15593 Inhalt 1. CERTIFICATION PROCEDURE... 2 1.1 Audit Preparation... 2 1.2 Audit Stage 1... 2 1.3 Audit Stage 2 Certification Audit... 3 1.4. Issue of Certificate... 3 2. SURVEILLANCE AUDIT... 3 3. RECERTIFICATION

More information

USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY

USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION

More information

NCS 8776 Certification scheme to NTA 8776

NCS 8776 Certification scheme to NTA 8776 NCS 8776 Certification scheme to NTA 8776 RD_130, Issue 02 This guide describes the procedures and conditions for testing and certification used for conformity assessment within the NCS 8776 Certification

More information

Description of the certification procedure MS - ISO 9001, MS - ISO 14001, MS - ISO/TS and MS BS OHSAS 18001, MS - ISO 45001, MS - ISO 50001

Description of the certification procedure MS - ISO 9001, MS - ISO 14001, MS - ISO/TS and MS BS OHSAS 18001, MS - ISO 45001, MS - ISO 50001 The certification of a management system based on standard ISO 9001, ISO 14001, ISO/TS 29001, BS OHSAS 18001, ISO 45001 or ISO 50001, consists of the offer and contract phase, the audit preparation, performance

More information

Hohenstein Laboratories GmbH & Co. KG Schloss Hohenstein Boennigheim Germany

Hohenstein Laboratories GmbH & Co. KG Schloss Hohenstein Boennigheim Germany Certification Body Products Hohenstein Laboratories GmbH & Co. KG Schloss Hohenstein 74357 Boennigheim Germany File: APPLICATION for award of the GS safety mark for a HuPF assessment (for products) for

More information

The appendix to the certificate is part of the certificate and consists of 4 pages.

The appendix to the certificate is part of the certificate and consists of 4 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó NCP

More information

SIRIM QAS International Sdn. Bhd.

SIRIM QAS International Sdn. Bhd. SIRIM QAS International Sdn. Bhd. epcs/doc/01-1.1 ECO-LABELLING CERTIFICATION SCHEME INTRODUCTION Any manufacturer or company may apply to SIRIM QAS International Sdn. Bhd. to have a product certified

More information

SIRIM QAS International Sdn. Bhd.

SIRIM QAS International Sdn. Bhd. SIRIM QAS International Sdn. Bhd. ECO-LABELLING CERTIFICATION SCHEME INTRODUCTION Any manufacturer or company may apply to SIRIM QAS International Sdn. Bhd. to have a product certified to the requirements

More information

Rules for LNE Certification of Management Systems

Rules for LNE Certification of Management Systems Rules for LNE Certification of Management Systems Application date: March 10 th, 2017 Rev. 040716 RULES FOR LNE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE... 3 2. SCOPE... 3 3. DEFINITION

More information

Content of mandatory certificates

Content of mandatory certificates Chapter: 2.5.1 Conformity assessment procedures; General rules Text:... Key words: certificate, certificate of competence, 1. Purpose The purpose of this recommendation is to provide guidance on the minimum

More information

SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008

SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008 SLOVAK FOREST CERTIFICATION SYSTEM September 1, 2008 REQUIREMENTS FOR CERTIFICATION BODIES CONDUCTING FOREST CERTIFICATION AND CHAIN - OF - CUSTODY OF WOOD VERIFICATION SFCS 1005:2004 Effective as of September

More information

TURKISH STANDARDS INSTITUTION

TURKISH STANDARDS INSTITUTION TURKISH STANDARDS INSTITUTION NEW GLOBAL OLD APPROACH REGULATIONS CONFORMITY ASSESSMENT PROCEDURES AND PRINCIPLES Board Decision : 29.04.2014 Date 50.-236 Validity date : 05.05.2014 CHAPTER ONE Objective,

More information

declaration that the same application has not been submitted to any other registered body;

declaration that the same application has not been submitted to any other registered body; Short introduction Product certification can be requested by the manufacturer or the authorized agent of the manufacturer (importer) i.e. the applicant. Certification is carried out on the basis of a Module

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Bundesnotarkammer Burgmauer 53 50667 Köln, Germany to confirm that its trust service BNotK qualifizierte

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Asseco Data Systems S.A. Certum CA, ul. Bajeczna 13 71-838 Szczecin, Poland to confirm that its trust

More information

Procedure for Issue and Withdrawal of Certificates

Procedure for Issue and Withdrawal of Certificates IC/PR/11- Rev.01 Pages: 1/6 Procedure for Issue and Withdrawal of Certificates Inter Cert Pvt. Ltd. C-46, Ground Floor, Sector 10, Noida 201301, U.P., India Tel: +91-120-4542204, 4542205, Fax: 91-120-4542205

More information

CERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS

CERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS Accredited product certification CERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS Revisions in this document: Rev. no. Date Description of revision 3 2015-08-25 4.8 Added information regarding certificate

More information

SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS

SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management

More information

EU-TYPE EXAMINATION CERTIFICATE

EU-TYPE EXAMINATION CERTIFICATE Active electrical energy meter CEMP Issued to Corroventa Avfuktning AB Mekanikervägen 3, SE 564 35 Bankeryd, Sweden, 0402-MID- SC0781-18 The product is fulfilling module B (Annex II) of directive 2014/32/EU

More information

PRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS

PRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS Ref No: RACS/PCS/11 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Energy Drinks

More information

Marks associated with TUV SUD BABT Certification Schemes

Marks associated with TUV SUD BABT Certification Schemes TUV SUD BABT is a certification body of TUV SUD BABT 2017 BABT_AP014.docx Page 1 of 11 Contents 1. Introduction... 3 2. Definitions... 3 3. Overview of Schemes and Associated Marks... 3 4. Accreditation

More information

PRODUCT CERTIFICATION SCHEME FOR DETERGENT PRODUCTS

PRODUCT CERTIFICATION SCHEME FOR DETERGENT PRODUCTS Ref No: RACS/PCS/03 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Detergents

More information

PRODUCT CERTIFICATION SCHEME FOR FOOD-HONEY PRODUCTS

PRODUCT CERTIFICATION SCHEME FOR FOOD-HONEY PRODUCTS Ref No: RACS/PCS/14 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Honey

More information

PRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS

PRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys

More information

Regulations for Compulsory Product Certification

Regulations for Compulsory Product Certification Regulations for Compulsory Product Certification Chapter I General Provisions Article 1 Based on relevant laws and regulations covering product safety licensing and product quality certification so as

More information

Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer

Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer Issue: 1.0 Date: 21/01/2018 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI

More information

ÉMI-TÜV SÜD. Regulation of product certification and use of ÉMI-TÜV SÜD KERMI. certification mark. ÉMI TÜV SÜD Ltd.

ÉMI-TÜV SÜD. Regulation of product certification and use of ÉMI-TÜV SÜD KERMI. certification mark. ÉMI TÜV SÜD Ltd. Regulation of product certification and use of ÉMI-TÜV SÜD KERMI certification mark ÉMI TÜV SÜD Ltd. KERMI Department Budapest, 01.09.2017. Notified Body 1417 KERMI Department Rn.: 13-09-072640 Tax nr:

More information

RECOMMENDATION FOR USE

RECOMMENDATION FOR USE Page 1 of 6 TITLE CONTENT OF THE TECHNICAL FILE ORIGINATOR NB-RAIL STRATEGY SG SUBJECT RELATED TO Directives 2008/57/EC, 2009/131/EC, 2011/18/EU, Recommendation 2011/217/EU, Decision 2010/713/EU and all

More information

ISO/IEC 17065:2012 VERTICAL/FILE REVIEW ASSESSMENT

ISO/IEC 17065:2012 VERTICAL/FILE REVIEW ASSESSMENT F 136-04 ISO/IEC 17065:2012 SANAS Accr. No/s. VERTICAL/FILE REVIEW ASSESSMENT Organisation Organisation Representative Date: Area / field of operation Accreditation standard Assessor Signed Lead Assessor:

More information

Marks Associated with TUV SUD BABT Certification Schemes

Marks Associated with TUV SUD BABT Certification Schemes Marks Associated with TUV SUD BABT Certification Schemes TUV SUD BABT is a Certification Body of TUV SUD BABT 2018 BABT AP014 Page 1 of 11 Contents 1. Introduction...3 2. Definitions...3 3. Overview of

More information

PEFC Certification System Netherlands - Certification Procedures

PEFC Certification System Netherlands - Certification Procedures PCSN SCHEME DOCUMENT PCSN IV Issue 2 10-03-2017 PEFC Certification System Netherlands - Certification Procedures PEFC Netherlands Kokermolen 11 3994 DG Houten The Netherlands Tel: +31 30 693 0040 Fax:

More information

Requirements for Certification Bodies

Requirements for Certification Bodies ISCC PLUS 251 Requirements fo Certification Bodies Requirements for Certification Bodies ISCC PLUS 251 V 1.0 Copyright notice ISCC 2012 This ISCC document is protected by copyright. It is freely available

More information

2.4 The inspection and certification orders are processed in the order in which the documents and/or information are received.

2.4 The inspection and certification orders are processed in the order in which the documents and/or information are received. 1 Scope and Definition The Inspection and Certification Ordinance applies to the performance of inspections and the issuing of certificates for products, continuous surveillance and approval of manufacturer

More information

IAF Informative Document. Information on the Transition of Management System Accreditation to ISO/IEC :2015 from ISO/IEC 17021:2011

IAF Informative Document. Information on the Transition of Management System Accreditation to ISO/IEC :2015 from ISO/IEC 17021:2011 IAF Informative Document Information on the Transition of Management System Accreditation to ISO/IEC 17021-1:2015 from ISO/IEC 17021:2011 Issue 1 (IAF ID 11:2015) Issue 1 Information on the Transition

More information

IM /2016 REV01 LACI Production Monitoring Module

IM /2016 REV01 LACI Production Monitoring Module IM3063 03/2016 REV01 LACI Production Monitoring Module OPERATOR S MANUAL Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu Declaration of conformity

More information

ARTICLE 29 DATA PROTECTION WORKING PARTY

ARTICLE 29 DATA PROTECTION WORKING PARTY ARTICLE 29 DATA PROTECTION WORKING PARTY 18/EN WP261 Article 29 Working Party Draft Guidelines on the accreditation of certification bodies under Regulation (EU) 2016/679 Adopted on 6 february 2018 1 THE

More information

Assurance Continuity Maintenance Report

Assurance Continuity Maintenance Report Assurance Continuity Maintenance Report Buheita Fujiwara, Chairman Information-Technology Promotion Agency, Japan Changed TOE Application date/id Certification No. Sponsor Name of TOE / Version of TOE

More information

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité Déclaration de conformité

More information

Date yyyy-mm-dd binding declaration GASTEC QA GENERAL REQUIREMENTS

Date yyyy-mm-dd binding declaration GASTEC QA GENERAL REQUIREMENTS Date yyyy-mm-dd binding declaration GASTEC QA GENERAL REQUIREMENTS 253/160324 Foreword Kiwa These have been approved by the GASTEC QA Board of Experts, in which all relevant parties in the field of gas-related

More information

Training and guidance on OASIS changes will be made available to affected stakeholders.

Training and guidance on OASIS changes will be made available to affected stakeholders. Purpose: Provide supplemental rules for all stakeholders to facilitate the transition to the 9100/9110/9120:2009 Aerospace Quality Management Systems (AQMS) standards, including use of the updated 9101:2009

More information

Welding Certificate TÜV SÜD

Welding Certificate TÜV SÜD Welding Certificate TÜV SÜD-00064.2013.004 in accordance with EN 1090-1, table B.1, its hereby declared: The manufacturer has produced evidence that he fulfills the requirements of the European standard

More information

Certification Description of Malaysia Sustainable Palm Oil (MSPO) Standard

Certification Description of Malaysia Sustainable Palm Oil (MSPO) Standard The certification of a management system based on standard Malaysia Sustainable Palm Oil Standard (MSPO) respectively, consists of the offer and contract phase, the audit preparation, performance of the

More information

Digital Signatures Act 1

Digital Signatures Act 1 Issuer: Riigikogu Type: act In force from: 01.07.2014 In force until: 25.10.2016 Translation published: 08.07.2014 Digital Signatures Act 1 Amended by the following acts Passed 08.03.2000 RT I 2000, 26,

More information

UL TYPE EXAMINATION CERTIFICATE Low Voltage Directive 2014/35/EU

UL TYPE EXAMINATION CERTIFICATE Low Voltage Directive 2014/35/EU 00-IC-F0468 Issue #: 6.0_LVD Page 1/14 Applicant Manufacturer Product Sample Description WAAREE ENERGIES LTD 602, Western Edge-I, Off. Western Express Highway, Borivali(E), Mumbai 400066, Maharashtra,

More information

USDA ISO Guide 65 Program Accreditation for Certification Bodies

USDA ISO Guide 65 Program Accreditation for Certification Bodies Page 1 of 6 USDA ISO Guide 65 Program Accreditation for Certification Bodies 1 Purpose This document provides the requirements to be met in designing a USDA ISO Guide 65 Program. It also provides the requirements

More information

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES. Rules on Use of ACCAB Accreditation Symbols & Logos

ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES. Rules on Use of ACCAB Accreditation Symbols & Logos ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Rules on Use of ACCAB Accreditation Symbols & Logos ACCAB-ASM-13.0 CONTROLLED COPY

More information

IAF Information Document (draft)

IAF Information Document (draft) International Accreditation Forum, Inc. IAF Information Document (draft) Information on the Transition of Management System Accreditation to ISO/IEC 17021:2010 from ISO/IEC 17021:2006 (IAF ID?:2010) The

More information

The appendix to the certificate is part of the certificate and consists of 3 pages.

The appendix to the certificate is part of the certificate and consists of 3 pages. The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Dt. Rentenversicherung Rheinland Königsallee 71 40194 Düsseldorf, Germany to confirm that its trust

More information

IT ASSET DISPOSAL STANDARD

IT ASSET DISPOSAL STANDARD IT ASSET DISPOSAL STANDARD RecycleIT Processing facility at Unit 5, Time Technology Park, Blackburn Road Simonstone, Lancashire, BB12 7TW Are awarded a Pass with Distinction Certificate Number AAC049 Certified

More information

Confined Space Entry (CSE) Certification Training Standard

Confined Space Entry (CSE) Certification Training Standard Confined Space Entry (CSE) Certification Training Standard The Newfoundland and Labrador Occupational Health and Safety Regulations, Section 511 (3) states that a person shall not work in a Confined Space

More information

Prot. DC2018SSV120 Milano, To all Certification Bodies (CBs) with OH&S accreditation. To the associations of Conformity Assessment Bodies

Prot. DC2018SSV120 Milano, To all Certification Bodies (CBs) with OH&S accreditation. To the associations of Conformity Assessment Bodies Prot. DC2018SSV120 Milano, 22-03-2018 To all Certification Bodies (CBs) with OH&S accreditation To the associations of Conformity Assessment Bodies Subject: Department of Certification and Inspection informative

More information

Raad voor Accreditatie (Dutch Accreditation Council RvA) Specific Accreditation Protocol for Certification according to ISO/IEC 20000

Raad voor Accreditatie (Dutch Accreditation Council RvA) Specific Accreditation Protocol for Certification according to ISO/IEC 20000 Raad voor Accreditatie (Dutch Accreditation Council RvA) Specific Accreditation Protocol for Certification according to ISO/IEC 20000 Document code: RvA-SAP-C002-UK Version 3, 3-10-2017 A Specif ic Accreditation

More information

RECOMMENDATION FOR USE

RECOMMENDATION FOR USE Page 1 of 23 TITLE CONTENT OF EC CERTIFICATE/ QMS-APPROVAL/ ISV ORIGINATOR NB-RAIL SUB-GROUP STRATEGY SUBJECT RELATED TO DIRECTIVE 2008/57/EC (AS AMENDED BY 2009/131/EC, 2011/18/EU, 2010/713/EU, 2013/9/EU,

More information

Gdańsk, DECEMBER 2017

Gdańsk, DECEMBER 2017 Principles of using management systems certification marks December 2017 were approved by the Manager of the Management Systems Certification Bureau of Polish Register of Shipping on 1 December 2017. On

More information

GDPR AMC SAAS AND HOSTED MODULES. UK version. AMC Consult A/S June 26, 2018 Version 1.10

GDPR AMC SAAS AND HOSTED MODULES. UK version. AMC Consult A/S June 26, 2018 Version 1.10 GDPR AMC SAAS AND HOSTED MODULES UK version AMC Consult A/S June 26, 2018 Version 1.10 INDEX 1 Signatures...3 2 General...4 3 Definitions...5 4 Scoping...6 4.1 In scope...6 5 Responsibilities of the data

More information

VOLUNTARY CERTIFICATION SCHEME FOR MEDICINAL PLANT PRODUCE REQUIREMENTS FOR CERTIFICATION BODIES

VOLUNTARY CERTIFICATION SCHEME FOR MEDICINAL PLANT PRODUCE REQUIREMENTS FOR CERTIFICATION BODIES VOLUNTARY CERTIFICATION SCHEME FOR MEDICINAL PLANT PRODUCE 1. Scope REQUIREMENTS FOR CERTIFICATION BODIES 1.1 This document describes the requirements the Certification Bodies (CBs) are expected to meet

More information

Med-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH

Med-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH Med-Info International expert information for the medical device industry Council Directive 93/42/E on medical devices Practice-oriented summary of the most important aspects and requirements contained

More information

MODEL CERTIFICATE FOR FISH AND FISHERY PRODUCTS CAC/GL

MODEL CERTIFICATE FOR FISH AND FISHERY PRODUCTS CAC/GL CAC/GL 48-2004 Page 1 of 6 INTRODUCTION MODEL CERTIFICATE FOR FISH AND FISHERY PRODUCTS CAC/GL 48-2004 Certification is one method that can be utilized by regulatory agencies of importing and exporting

More information

Some views on the challenges for stakeholders on conformity assessment activities

Some views on the challenges for stakeholders on conformity assessment activities on Accreditation and Conformity Assessment Some views on the challenges for stakeholders on conformity assessment activities Rome, 28 June 2013 Mr Technologist INAIL INAIL The national insitute of insurance

More information

Introduction. Content. Training Course NAA Inspectors Training Course - Initial Airworthiness. Location(s) / Date(s) List price September 2019

Introduction. Content. Training Course NAA Inspectors Training Course - Initial Airworthiness. Location(s) / Date(s) List price September 2019 Training Course NAA Inspectors Training Course - Initial Airworthiness Location(s) / Date(s) Hoofddorp, 11-13 February 2019 Netherlands 17-19 September 2019 List price 1290.00 Introduction EU Regulation

More information

DATA SECURITY INFORMATION COMMON CRITERIA ISO-IEC15408

DATA SECURITY INFORMATION COMMON CRITERIA ISO-IEC15408 DATA SECURITY INFORMATION COMMON CRITERIA ISO-IEC1408 TASKALFA 601 i/8001 i REV-1.1 /March 201 ~ K!::IDCERa Document Solutions Contents Information Data Security KitE IEEE 2600-1 TASKALFA 601 i/8001 i

More information

Certification of Quality Management Systems with respect to Product Compliance

Certification of Quality Management Systems with respect to Product Compliance Certification of Quality Management Systems with respect to This document describes in detail the steps Telefication follows for certification of the various Quality Management Systems with respect to.

More information

PRODUCT CERTIFICATION SCHEME FOR MECHANICAL-CUSTOMIZED VEHICLES

PRODUCT CERTIFICATION SCHEME FOR MECHANICAL-CUSTOMIZED VEHICLES Ref No: RACS/SOP/57 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Mechanical Customized

More information

Digital Multimeter Safety Tips

Digital Multimeter Safety Tips Digital Multimeter Safety Tips Most engineers perform measurements with a digital multimeter (DMM) as part of their job. Before you grab the nearest handheld DMM next time, make sure you select the right

More information

Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard

Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard Issue: 1.0 Date: 01/09/2015 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI QUALITY

More information

SGS INTRON CERTIFICATIE CERTIFICATION AND ATTESTATION REGULATIONS 2015 TABLE OF CONTENT

SGS INTRON CERTIFICATIE CERTIFICATION AND ATTESTATION REGULATIONS 2015 TABLE OF CONTENT TABLE OF CONTENT 1. INTRODUCTION...2 2. PROCEDURES...3 2.1 SUMMARY... 3 2.2 ADMISSION PROCEDURES... 4 2.2.1 Information... 4 2.2.2 Quotations... 4 2.2.3 Conclusion of an agreement... 4 2.2.4 Admission

More information

APPROVAL SHEET PROCEDURE INFORMATION SECURITY MANAGEMENT SYSTEM CERTIFICATION. PT. TÜV NORD Indonesia PS - TNI 001 Rev.05

APPROVAL SHEET PROCEDURE INFORMATION SECURITY MANAGEMENT SYSTEM CERTIFICATION. PT. TÜV NORD Indonesia PS - TNI 001 Rev.05 APPROVAL SHEET PROCEDURE INFORMATION SECURITY MANAGEMENT SYSTEM CERTIFICATION PT. TÜV NORD Indonesia PS - TNI 001 Rev.05 Created : 20-06-2016 Checked: 20-06-2016 Approved : 20-06-2016 Indah Lestari Karlina

More information

EU-type Examination Certificate

EU-type Examination Certificate 0402-MID-527503 Issued to Sunit Oy, Taitoraitti 1, FIN-87400 Kajaani, Finland In respect of (type of instrument) Taximeter model Sunit fc2, type SFDIN1-411543-AT In accordance with The Measuring Instruments

More information

CLOUD QUALITY AND CLOUD CERTIFICATION

CLOUD QUALITY AND CLOUD CERTIFICATION CLOUD QUALITY AND CLOUD CERTIFICATION 8th EuroCloud Congress Cloud, Trust & Security 25th October 2017 / Brussels, Belgium Ivana Tepčević Project Manager and Lead Auditor, SGS Belgrade AGENDA SGS in brief

More information

Examination Regulations for Employee Certification regarding Usability Engineering

Examination Regulations for Employee Certification regarding Usability Engineering Examination Regulations for Employee Certification regarding Usability Engineering Fraunhofer-Personenzertifizierungsstelle Fraunhofer-Institute for Applied Information Technology FIT December 2016, Revision

More information

Abu Dhabi Certification Scheme for Beauty Salon Sector

Abu Dhabi Certification Scheme for Beauty Salon Sector Abu Dhabi Certification Scheme for Beauty Salon Sector Hairstylist Assessment and Surveillance Plan for Beauty Salon Sector Hairstylist Issue: 1.0 Date: 27/11/2016 Total Number of Pages: 12 Table of Contents

More information

INAB Mandatory and Guidance Documents Policy and Index

INAB Mandatory and Guidance Documents Policy and Index INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such

More information

Testing and Certification Procedure

Testing and Certification Procedure A PM 101E April 2011 Guideline for the Testing and Certification Procedure of the VDE Testing and Certification Institute (VDE Institute) (For information purpose only. In any case the German version shall

More information

CESI-IECEx SCHEME. CERTIFICATE OF CONFORMITY OF PRODUCTS USED IN POTENTIALLY EXPLOSIVE ATMOSPHERES DOCUMENT IECEx02 REGULATIONS

CESI-IECEx SCHEME. CERTIFICATE OF CONFORMITY OF PRODUCTS USED IN POTENTIALLY EXPLOSIVE ATMOSPHERES DOCUMENT IECEx02 REGULATIONS Pagina 1 di 9 CESI-IECEx SCHEME CERTIFICATE OF CONFORMITY OF PRODUCTS USED IN POTENTIALLY EXPLOSIVE ATMOSPHERES DOCUMENT IECEx02 REGULATIONS Document approved by The Technical Certification Committee of

More information

Payment Card Industry (PCI) 3-D Secure (PCI 3DS) Qualification Requirements for 3DS Assessors

Payment Card Industry (PCI) 3-D Secure (PCI 3DS) Qualification Requirements for 3DS Assessors Payment Card Industry (PCI) 3-D Secure (PCI 3DS) Qualification Requirements for 3DS Assessors Version 1.0 November 2017 Document Changes Date Version Description November 2017 1.0 Initial Release of the

More information

Reliable Quality Assurance Pvt. Ltd.

Reliable Quality Assurance Pvt. Ltd. 1. Introduction: This document defines the procedure that has to be followed by the organizations seeking certification and also certified organizations for Food Safety Management Systems (ISO 22000:2005).

More information

PRODUCT CERTIFICATION SCHEME FOR FOOD CONTACT MATERIALS

PRODUCT CERTIFICATION SCHEME FOR FOOD CONTACT MATERIALS Ref No: RACS/PCS/07 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Food

More information

AsureQuality Limited. CodeMark Programme. Certificate Holder Responsibilities and Requirements

AsureQuality Limited. CodeMark Programme. Certificate Holder Responsibilities and Requirements AsureQuality Limited CodeMark Programme Certificate Holder Responsibilities and Requirements Page 1 of 6 1. SCOPE This document describes the responsibilities and requirements of Certificate Holders for

More information

EVROTRUST TECHNOLOGIES JSC

EVROTRUST TECHNOLOGIES JSC CERTIFICATE OF CONFORMITY The certification body LSTI declares EVROTRUST TECHNOLOGIES JSC HEADQUARTER: #101 TSARIGRADSKO SHAUSSE BLVD., BUSINESS CENTER ACTIVE, FLOOR 6, SOFIA 1113, REPUBLIC OF BULGARIA

More information