WI-FI SURVEILLANCE CAMERA SOKL 1920 B2. WI-FI SURVEILLANCE CAMERA Quick Start Guide IAN

Transcription

1 WI-FI SURVEILLANCE CAMERA SOKL 1920 B2 WI-FI SURVEILLANCE CAMERA Quick Start Guide IAN

2 GB/IE/NI Quick Start Guide Page 3

3 6mm 1/4 6mm 1/4 6mm 5/8 6mm 1/4 Quick Start Guide NOTE: Get your camera up and running with this Quick Start Guide; however, before using the product read the complete instruction manual. Especially the safety notices must be read before mounting and initiating the camera. Scope of delivery RJ45 Camera observation / Kameraüberwachung x Wi-Fi Surveillance Camera 6 1 x Antenna 15 1 x PoE adaptor cable (Power over Ethernet) 18 1 x Power adaptor 19 1 x Wall mounting template / drill pattern 20 3 x Screws 21 1 x Quick start guide and instruction manual 22 3 x Wall plugs 23 1 x CD with assembly, operating and safety instructions 24 1 x Under surveillance sticker Camera overview PIR motion detector Antenna Camera connection cable Lens IR LEDs GB/IE/NI 3

4 Installing the camera You will need: Ethernet cable Wi-Fi router (2.4 GHz b/g/n) microsd card (up to 128 GB) Tools: Electric drill Cross-head screwdriver Ø 6 mm (1/4 ) masonry drill bit ios device with ios 7.0 or above or Android device with Android 4.4X or above Ø 16 mm (5/8 ) masonry drill bit Sealing compound e.g. silicone A1 A2 A x3 22 Stick the wall mounting template 19 on the wall, eave or ceiling using the duct tape (not provided) in the desired mounting position. Drill 3 mounting holes (Ø 6 mm, 1/4 ) (Fig. A1). Drill 1 hole (Ø 16 mm, 5/8 ) in the wall for use as a cable guide (Fig. A2). Insert the wall plugs 22 into the mounting holes (Fig. A3). A4 5 Pull the camera connection cable 5 through the cable hole (Fig. A4). 4 GB/IE/NI

5 A5 20 x3 8 Fix the wall mounting 8 to the mounting surface using the screws 20 provided (Fig. A5). Connecting the cables Antenna Router (not included) Ethernet slot RJ45 Camera Power socket Configuring the camera Download and install the "Silvercrest IP Cam S-K 1920" application on your smart device. The application is available in the App Store for ios devices and in the Google Play store for Android devices. Alternatively scan the appropriate QR code for your smart device operating system. Tap icon to add the camera and follow the on-screen instructions. We advise you to go through the 1-minute demo before configuring the camera. Power adaptor NOTE: The view varies depending on the operating system in use. For more information, refer to the full manual of this product. GB/IE/NI 5

6 Connecting to Wi-Fi For the first time setup to connect camera with Wi-Fi network, follow the detailed steps in the App during setup. If you want to update the Wi-Fi setting, follow below steps for advanced setup. Tap "Edit Settings" and then "Settings". Tap "Advanced" and type in the admin password set during the configuration process. Tap (Wi-Fi) to go to the "Wi-Fi Settings". Choose the Wi-Fi network and type in the password. NOTE: The Wi-Fi router's default password is usually labelled at the back of router. If you have changed default password to a custom one, make sure the password is correct before you setup the camera. Live View Tap to enter the Live View mode. Depending on the network speed and/or connection status, it may take a while to load the live view. Snapshot Mute/Unmute Record Night View Auto / Off Arm / Disarm Tap to take a screenshot. The pictures are saved in your smart device gallery. Tap to mute/unmute audio in live view mode. Make sure the smart device itself is not muted. Tap to record approx. 1 minute video on the microsd card. The recording cannot be stopped manually. Tap to enable/disable automatic infra-red for black & white vision. Arm the camera to start detecting/recording/sending push notifications when you are away. Disarm the function when you do not want the camera to mail data to you. 6 GB/IE/NI

7 OWIM GmbH & Co. KG Stiftsbergstraße 1 DE Neckarsulm GERMANY Model No.: HG03329A-BS, HG03329B-BS Version: 09/2017 IAN