FROM POLYSILICON TO SYSTEMS

Transcription

1 FROM POLYSILICON TO SYSTEMS

2 CONTENTS CORPORATE 2 GW VERTICAL INTEGRATION GRID PARITY FORMULA POLYSILICON INGOTS WAFERS CELLS MODULES SYSTEMS PRODUCTS LDK MODULES: QUALITY AND GUARANTEES FULL-BLACK MODULE FRAMELESS MODULE MONOCRYSTALLINE MODULES POLYCRYSTALLINE MODULES LDK SYSTEMS: RESIDENTIAL KITS LDK SYSTEMS: POWERPLANT BLOCK ADVERTISING LDK SOLAR, THE WORLD S LARGEST VERTICALLY INTEGRATED MANUFACTURER, BEST IN CLASS TECHNOLOGY AND COST EFFECTIVE Vertically integrated solar manufacturer Proven cost reduction roadmap Proven leadership in wafer manufacturing & ability to ramp up polysilicon production Strong and diversified wafer and module customer base Attractive growth strategies 2 3

3 truly vertically INTEGRATED LEADER IN THE SOLAR INDUSTRY SILICON RECYCLING POLYSILICON INGOT/WAFER CELL MODULE SYSTEM/PROJECT IN HOUSE IN HOUSE & THIRD PARTY IN HOUSE IN HOUSE & THIRD PARTY IN HOUSE IN HOUSE & THIRD PARTY / MT PER YEAR MT TODAY MT BY END OF GW TODAY 4.2 GW BY END OF MW TODAY.8 GW BY END OF 20.6 GW TODAY 3.0 GW BY END OF 20 > 0 MW PIPELINE IN EUROPE, US, AFRICA, ASIA AND CHINA 4 5

4 VERTICAL INTEGRATION PROVEN COST REDUCTION ROADMAP GRID PARITY FORMULA LDK Solar manufactures polysilicon, mono and multi crystalline ingots, wafers, cells and modules under one roof. An incredibly competitive cost structure with high quality and efficiency products that means the best formula to the real grid parity. GRID PARITY = LDK SOLAR HIGH QUALITY HIGH EFFICIENCY + PRODUCTS + COMPETITIVE COST STRUCTURE 2 GW THE BIGGEST FULLY INTEGRATED PRODUCTION IN THE WORLD ECONOMIES OF SCALE & RAPID + GROWTH 6 7

5 LDK POLYSILICON THE WORLD S LARGEST SINGLE POLYSILICON PLANT SITE MT today LDK INGOTS LARGER INGOT PRODUCTION MEANS COST REDUCTION 3.5 GW today As a part of its vertical integration strategy, in 2008 LDK Solar constructed a polysilicon plant with two production facilities, near its wafer production facilities. With a total yearly production capacity of 2000 MT, this is the largest single polysilicon manufacturing plant site in the world. The installation of a closed loop polysilicon production process allows LDK Solar to produce and use on site many of the key chemicals and gases required to make silicon, while also recycling residual STC. TECHNICAL SPECIFICATION N Silicon Grade Semiconductor Grade Solar Grade N-Type Resistivity (u.cm) > 0 > P-Type Resistivity (u.cm) > 00 > 0 Carbon Content (atoms/cm 3 ) >,5 x E6 > 2,5 x E6 At LDK Solar, we produce larger monocrystalline and multicrystalline ingots. This innovation enables us to increase our yield of ingots and improve the utilization rates of our facilities thus reducing costs by reaching large scale economies. For example, LDK Solar produces 800-kg multicrystalline ingots which increase throughput production efficiencies by reducing manufacturing bottlenecks. 8 9

6 LDK WAFERS THE LARGEST MULTICRYSTALLINE WAFER PROVIDER IN THE WORLD 3.5 GW today LDK CELLS PV CELL IN-HOUSE MANUFACTURING 800 MW today As the largest multicrystalline wafer provider in the world, LDK Solar has an established track record of consistently delivering high quality solar wafers to our valued customers. We take pride in providing technologically advanced and reliable solar wafers. At LDK Solar, we utilize state-of-the-art wafer processing equipment combined with proprietary know-how that enables us to make efficient use of polysilicon and therefore lower the costs. Manufacturing in-house PV cells and increasing the efficiency of solar cells is one of the most effective ways to reduce the cost of PV modules. We completed our 800 MW manufacturing line and can now produce our own cells in-house. We also developed new high-efficiency monocrystalline and multicrystalline cell technology. Manufacturing our own cells in-house enables us to reduce the cost of modules and increase quality management. Mono Mono Multi Multi 0

7 LDK MODULES MAKING SOLAR MODULES ACCESSIBLE FOR EVERYONE.6 GW today LDK SYSTEMS THE FINAL DOWNSTREAM INTEGRATION > 0 MW pipeline worldwide Vertically integrated manufacturing Large scale production facilities Proven low-cost manufacturing High-quality, high-efficiency products Leading global wafer supplier Diversified global customer base CAPACITY: 600 MW April GW Today 3.0 GW By the end of 20 Mono Multi LDK Solar has reached our goal to become the most vertically integrated PV company by also providing system integration. With proven experience, know-how and passion to help our clients, LDK Solar can provide engineering and design support, ensure the quality of the products and monitor the efficiency of the system. We can also offer financing solutions, thanks to a strategic agreement with China Development Bank that will provide up to $ 8.9 billion of credit facilities to LDK Solar over a five-year period. Financial solution service NEW 2 3

8 LDK PRODUCTS LDK SOLAR MODULES OUR MODULE QUALITY IS RELIABLE AND GUARANTEED MODULE QUALITY Manufactured under stringent quality contract standards: 0/+5 Wp power classification high conversion efficiency ability to withstand wind and snow load, and extreme temperature variations rigorous quality control meeting the highest international standards industry leading 25 year power warranty MODULE WARRANTY One of the most comprehensive warranties in the solar industry: materials and workmanship - covered for 5 years power rating - tight power tolerances within +/- 3% of the module nameplate rating start date - from the date of sale, not the date of manufacture transferability - transferable to future system owners unlike other standard warranties MODULE RECYCLING Since the begining of 200 LDK Solar is a proud member of PV Cycle LDK Solar is committed to finding new ways to make our solar modules even more environmentally friendly, from increasing both cell and production efficiencies, to proactively adopting recycling programs for end-of-life PV modules 4 5

9 FULL-BLACK MODULE 85D-90D-95D-200D-24 (S) full-black design FRAMELESS MODULE 85D-90D-95D-200D-24 (S) FRAMEless for bipv and architecture NEW Product highlights Best efficiency and reliability with a modern and attractive black look Designed to be the perfect module for roof-top and residential roof Based on strict demands to reach architectural appearance requirements Highlights: elegant, modern and attractive NEW Product highlights Specially designed for BIPV and architectural applications Suitable for all standard buildingintegrated mounting systems Allows easy and flexible installation on roof-top use Options: standard or black appearance available ELECTRIC CHARACTERISTICS (STC*) ELECTRIC CHARACTERISTICS (STC*) 85D-24(s) 90D-24(s) 85D-24(s) 90D-24(s) DIMENSIONS IEC: 000V / UL: 600 V DIMENSIONS IEC: 000V / UL: 600 V places 8-8x3 8-4x9 Mounting slots 2-Ø4 Ground holes 2 places Junction box D-24(s) D-24(s) IEC: 000V / UL: 600 V ,24 Junction box D-24(s) D-24(s) IEC: 000V / UL: 600 V STC* (Standard Test Conditions): Irradiance 000W/m 2, Module Temperature 25 C, Air Mass.5 STC* (Standard Test Conditions): Irradiance 000W/m 2, Module Temperature 25 C, Air Mass.5 Current [A] Tolerance of length and width dimensions is ± 2 mm IV CURVE AT DIFFERENT IRRADIANCE LEVELS Voltage [V] MECHANICAL CHARACTERISTICS Solar Cells Front Cover Back Cover Encapsulant Frame Diodes Junction Box Connector Cables Dimension Weight Max. Load 85D-90D-95D-200D-24(s) 72 (6x2) monocryst. silicon solar cells 25 x 25 mm 3.2 mm thick, tempered glass / AR coating glass TPT (Tedlar-PET-Tedlar) / BBF EVA (ethylene vinyl acetate) Anodized aluminium alloy, double wall 6 Bypass diodes serviceable IP65 rated MC4 or compatible connector Lenght: 9 mm / Section: 4.0 mm x 808 x 40 mm / 62.4 x 3.8 x.6 inches (new dim.) 5.6 kg / 34.4 lbs Wind Load: 2400Pa / Snow Load: 5400 Pa Current [A] Tolerance of length and width dimensions is ± 2 mm IV CURVE AT DIFFERENT IRRADIANCE LEVELS Voltage [V] MECHANICAL CHARACTERISTICS Solar Cells Front Cover Back Cover Encapsulant Diodes Junction Box Connector Cables Dimension Weight 85D-90D-95D-200D-24(s) 72 (6x2) monocryst. silicon solar cells 25 x 25 mm 3.2 mm thick, tempered glass / AR coating glass TPT (Tedlar-PET-Tedlar) / BBF EVA (ethylene vinyl acetate) 6 Bypass diodes serviceable IP65 rated MC4 or compatible connector Lenght: 9 mm / Section: 4.0 mm x 802 x 4,5 mm / 62 x 3.6 x 0,2 inches (new dim.) 2.4 kg / 34 lbs 6 7

10 MONOCRYSTALLINE MODULES 60D-65D-70D-75D-80D-85D-90D-95D-200D-24 (S) NEW DIMENSIONS ELECTRIC CHARACTERISTICS (STC*) 60D-24(s) 65D-24(s) 70D-24(s) 75D-24(s) 80D-24(s) 85D-24(s) 90D-24(s) 95D-24(s) 200D-24(s) WHY LDK SOLAR MODULES IEC: 000V / UL: 600 V Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured in ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification STC* (Standard Test Conditions): Irradiance 000W/m 2, Module Temperature 25 C, Air Mass WARRANTIES ELECTRICAL PERFORMANCE AT NOCT 60D-24(s) 65D-24(s) 70D-24(s) 75D-24(s) 80D-24(s) 85D-24(s) 90D-24(s) 95D-24(s) 200D-24(s) 5 years for product defects in materials & workmanship 2 years for 90% of warranted minimum power 25 years for 80% of warranted minimum power Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) TEMPERATURE CHARACTERISTICS NOCT: Irradiance 800 W/m 2, Module Temperature 45± 2 C, Air Mass NOCT** Temperature Coefficient of Pmax Temperature Coefficient of Voc Temperature Coefficient of Isc Maximum Series Fuse Rating Operating Temperature Storage Temperature NOCT**: Nominal Operation Cell Temperature Sun 800 W/m 2 ; Air 20 C; wind speed m/s LDK-D-24 Series (s) 45±2 C -0.47% / C -0.34% / C 0.06% / C 20 A -40 to +85 C -40 to +60 C DIMENSIONS CERTIFICATES IEC: IEC 625, IEC 67 (&2), conformity to CE UL /03/5 Ed:3 Rev: 2004/06/ ULC/ORD-C703-0 second edition 200/0/0 UL and Canadian standard for safety flat-plate ISO900:2008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program PERFORMANCE AT LOW IRRADIANCE MECHANICAL CHARACTERISTICS Solar Cells Front Cover Back Cover Encapsulant Frame Diodes Junction Box Connector Cables Dimension Weight Max. Load LDK-D-24 Series (s) 72 (6x2) monocrystalline silicon solar cells 25 x 25 mm 3.2 mm thick, tempered glass / AR coating glass TPT (Tedlar-PET-Tedlar) / BBF EVA (ethylene vinyl acetate) Anodized aluminium alloy, double wall 6 Bypass diodes serviceable IP65 rated MC4 or compatible connector Lenght: 9 mm / Section: 4.0 mm x 808 x 40 mm / 62.4 x 3.8 x.6 inches (new dimensions) 5.6 kg / 34.4 lbs Wind Load: 2400Pa / Snow Load: 5400 Pa places 8-8x3 8-4x9 Mounting slots 2-Ø4 Ground holes 2 places Junction box Relative Efficiency Irradiance [W/m 2 ] The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 000W/m² (both at 25 C and AM.5 spectrum) is less than 6% IV CURVE AT DIFFERENT IRRADIANCE LEVELS 6 5 PACKING CONFIGURATION Packing Configuration Quantity/Pallet Loading Capacity LDK-D-24 Series (s) 25 pcs. / box pcs. / pallet 700 pcs. / 40 ft (H) Tolerance of length and width dimensions is ± 2 mm LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. April 20/V2/ LDK Solar Limited. All rights reserved. E.&O.E. 8 9 Current [A] Above graphics according to LDK-75D-24(s) Voltage [V]

11 MONOCRYSTALLINE MODULES 200D-205D-20D-25D-220D-225D-2D-235D-240D-245D- 2D-20 ELECTRIC CHARACTERISTICS (STC*) 200D D-20 20D-20 25D D D-20 2D D D D-20 2D-20 WHY LDK SOLAR MODULES STC* (Standard Test Conditions): Irradiance 000W/m 2, Module Temperature 25 C, Air Mass IEC: 000V / UL: 600 V Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured in ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification WARRANTIES ELECTRICAL PERFORMANCE AT NOCT 200D D-20 20D-20 25D D D-20 2D D D D-20 2D-20 5 years for product defects in materials & workmanship 2 years for 90% of warranted minimum power 25 years for 80% of warranted minimum power Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m 2, Module Temperature 45± 2 C, Air Mass.5 TEMPERATURE CHARACTERISTICS NOCT** Temperature Coefficient of Pmax Temperature Coefficient of Voc Temperature Coefficient of Isc Maximum Series Fuse Rating Operating Temperature Storage Temperature NOCT**: Nominal Operation Cell Temperature Sun 800 W/m 2 ; Air 20 C; wind speed m/s LDK-D-20 Series 45±2 C -0.47% / C -0.34% / C 0.06% / C 20 A -40 to +85 C -40 to +60 C DIMENSIONS CERTIFICATES IEC: IEC 625, IEC 67 (&2), conformity to CE UL /03/5 Ed:3 Rev: 2004/06/ ULC/ORD-C703-0 second edition 200/0/0 UL and Canadian standard for safety flat-plate ISO900:2008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program PERFORMANCE AT LOW IRRADIANCE MECHANICAL CHARACTERISTICS Solar Cells Front Cover Back Cover Encapsulant Frame Diodes Junction Box Connector Cables Dimension Weight Max. Load LDK-D-20 Series 60 (6x0) monocrystalline silicon solar cells 56 x 56 mm 3.2 mm thick, tempered glass / AR coating glass TPT (Tedlar-PET-Tedlar) / BBF EVA (ethylene vinyl acetate) Anodized aluminium alloy, double wall 6 Bypass diodes serviceable IP65 rated MC4 or compatible connector Lenght: 000 mm / Section: 4.0 mm x 994 x 40 mm / 64.2 x 39. x.6 inches 20 kg / 44. lbs Wind Load: 2400Pa / Snow Load: 5400 Pa places 8-8x3 8-4x9 Mounting slots 2-Ø4 Ground holes 2 places Tolerance of length and width dimensions is ± 2 mm Junction box Relative Efficiency.05 The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 000W/m² (both at 25 C and AM.5 spectrum) is less than 6% IV CURVE AT DIFFERENT IRRADIANCE LEVELS Irradiance [W/m 2 ] PACKING CONFIGURATION Packing Configuration Quantity/Pallet Loading Capacity LDK-D-20 Series 25 pcs. / box pcs. / pallet 700 pcs. / 40 ft (H) Above graphics according to LDK-220D-20 LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. April 20/V2/ LDK Solar Limited. All rights reserved. E.&O.E Current [A] Voltage [V]

12 POLYCRYSTALLINE MODULES 60P-65P-70P-75P-80P-85P-90P-95P-200P-24 (S) NEW DIMENSIONS ELECTRIC CHARACTERISTICS (STC*) 60P-24(s) 65P-24(s) 70P-24(s) 75P-24(s) 80P-24(s) 85P-24(s) 90P-24(s) 95P-24(s) 200P-24(s) WHY LDK SOLAR MODULES IEC: 000V / UL: 600 V Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured in ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification STC* (Standard Test Conditions): Irradiance 000W/m 2, Module Temperature 25 C, Air Mass WARRANTIES ELECTRICAL PERFORMANCE AT NOCT 60P-24(s) 65P-24(s) 70P-24(s) 75P-24(s) 80P-24(s) 85P-24(s) 90P-24(s) 95P-24(s) 200P-24(s) 5 years for product defects in materials & workmanship 2 years for 90% of warranted minimum power 25 years for 80% of warranted minimum power Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m 2, Module Temperature 45± 2 C, Air Mass.5 TEMPERATURE CHARACTERISTICS NOCT** Temperature Coefficient of Pmax Temperature Coefficient of Voc Temperature Coefficient of Isc Maximum Series Fuse Rating Operating Temperature Storage Temperature NOCT**: Nominal Operation Cell Temperature Sun 800 W/m 2 ; Air 20 C; wind speed m/s LDK-P-24 Series (s) 45±2 C -0.47% / C -0.34% / C 0.06% / C 20 A -40 to +85 C -40 to +60 C DIMENSIONS CERTIFICATES IEC: IEC 625, IEC 67 (&2), conformity to CE UL /03/5 Ed:3 Rev: 2004/06/ ULC/ORD-C703-0 second edition 200/0/0 UL and Canadian standard for safety flat-plate ISO900:2008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program PERFORMANCE AT LOW IRRADIANCE MECHANICAL CHARACTERISTICS Solar Cells Front Cover Back Cover Encapsulant Frame Diodes Junction Box Connector Cables Dimension Weight Max. Load LDK-P-24 Series (s) 72 (6x2) polycrystalline silicon solar cells 25 x 25 mm 3.2 mm thick, tempered glass / AR coating glass TPT (Tedlar-PET-Tedlar) / BBF EVA (ethylene vinyl acetate) Anodized aluminium alloy, double wall 6 Bypass diodes serviceable IP65 rated MC4 or compatible connector Lenght: 9 mm / Section: 4.0 mm x 808 x 40 mm / 62.4 x 3.8 x.6 inches (new dimensions) 5.6 kg / 34.4 lbs Wind Load: 2400Pa / Snow Load: 5400 Pa places 8-8x3 8-4x9 Mounting slots 2-Ø4 Ground holes 2 places Junction box Relative Efficiency The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 000W/m² (both at 25 C and AM.5 spectrum) is less than 6% IV CURVE AT DIFFERENT IRRADIANCE LEVELS 6 5 Irradiance [W/m 2 ] PACKING CONFIGURATION Packing Configuration Quantity/Pallet Loading Capacity LDK-P-24 Series (s) 25 pcs. / box pcs. / pallet 700 pcs. / 40 ft (H) Tolerance of length and width dimensions is ± 2 mm Above graphics according to LDK-75P-24(s) LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. April 20/V2/ LDK Solar Limited. All rights reserved. E.&O.E Current [A] Voltage [V]

13 POLYCRYSTALLINE MODULES 200P-205P-20P-25P-220P-225P-2P-235P-240P-245P- 2P-20 ELECTRIC CHARACTERISTICS (STC*) 200P P-20 20P-20 25P P P-20 2P P P P-20 2P-20 WHY LDK SOLAR MODULES IEC: 000V / UL: 600 V Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured ij ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification STC* (Standard Test Conditions): Irradiance 000W/m 2, Module Temperature 25 C, Air Mass WARRANTIES ELECTRICAL PERFORMANCE AT NOCT 200P P-20 20P-20 25P P P-20 2P P P P-20 2P-20 5 years for product defects in materials & workmanship 2 years for 90% of warranted minimum power 25 years for 80% of warranted minimum power Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m 2, Module Temperature 45± 2 C, Air Mass.5 TEMPERATURE CHARACTERISTICS NOCT** Temperature Coefficient of Pmax Temperature Coefficient of Voc Temperature Coefficient of Isc Maximum Series Fuse Rating Operating Temperature Storage Temperature NOCT**: Nominal Operation Cell Temperature Sun 800 W/m 2 ; Air 20 C; wind speed m/s LDK-P-20 Series 45±2 C % / C % / C 0.06 % / C 20 A -40 to +85 C -40 to +60 C DIMENSIONS CERTIFICATES IEC: IEC 625, IEC 67 (&2), conformity to CE UL /03/5 Ed:3 Rev: 2004/06/ ULC/ORD-C703-0 second edition 200/0/0 UL and Canadian standard for safety flat-plate ISO900:2008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program MCS The Microgeneration Certification Scheme UK PERFORMANCE AT LOW IRRADIANCE MECHANICAL CHARACTERISTICS Solar Cells Front Cover Back Cover Encapsulant Frame Diodes Junction Box Connector Cables Dimension Weight Max. Load LDK-P-20 Series 60 (6x0) polycrystalline silicon solar cells 56 x 56 mm 3.2 mm thick, tempered glass / AR coating glass TPT (Tedlar-PET-Tedlar) / BBF EVA (ethylene vinyl acetate) Anodized aluminium alloy, double wall 6 Bypass diodes serviceable IP65 rated MC4 or compatible connector Lenght: 000 mm / Section: 4.0 mm x 994 x 40 mm / 64.6 x 39. x.6 inches 20 kg / 44. lbs Wind Load: 2400Pa / Snow Load: 5400 Pa places 8-8x3 8-4x9 Mounting slots 2-Ø4 Ground holes 2 places Tolerance of length and width dimensions is ± 2 mm Junction box Relative Efficiency.05 The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 000W/m² (both at 25 C and AM.5 spectrum) is less than 6% IV CURVE AT DIFFERENT IRRADIANCE LEVELS Irradiance [W/m 2 ] PACKING CONFIGURATION Packing Configuration Quantity/Pallet Loading Capacity LDK-P-20 Series 25 pcs. / box pcs. / pallet 700 pcs. / 40 ft (H) Above graphics according to LDK-220P-20 LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. April 20/V2/ LDK Solar Limited. All rights reserved. E.&O.E Current [A] Voltage [V]

14 POLYCRYSTALLINE MODULES 240P-245P-2P-260P-265P-270P-275P-280P-285P- 290P-24 ELECTRIC CHARACTERISTICS (STC*) 240P P-24 2P P P P P P P P P-24 WHY LDK SOLAR MODULES IEC: 000V / UL: 600 V Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured in ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification STC* (Standard Test Conditions): Irradiance 000W/m 2, Module Temperature 25 C, Air Mass WARRANTIES ELECTRICAL PERFORMANCE AT NOCT 240P P-24 2P P P P P P P P P-24 5 years for product defects in materials & workmanship 2 years for 90% of warranted minimum power 25 years for 80% of warranted minimum power Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m 2, Module Temperature 45± 2 C, Air Mass.5 TEMPERATURE CHARACTERISTICS NOCT** Temperature Coefficient of Pmax Temperature Coefficient of Voc Temperature Coefficient of Isc Maximum Series Fuse Rating Operating Temperature Storage Temperature NOCT**: Nominal Operation Cell Temperature Sun 800 W/m 2 ; Air 20 C; wind speed m/s LDK-P-24 Series 45±2 C % / C % / C 0.06 % / C 20 A -40 to +85 C -40 to +60 C DIMENSIONS CERTIFICATES IEC: IEC 625, IEC 67 (&2), conformity to CE UL /03/5 Ed:3 Rev: 2004/06/ ULC/ORD-C703-0 second edition 200/0/0 UL and Canadian standard for safety flat-plate ISO900:2008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program PERFORMANCE AT LOW IRRADIANCE MECHANICAL CHARACTERISTICS Solar Cells Front Cover Back Cover Encapsulant Frame Diodes Junction Box Connector Cables Dimension Weight Max. Load LDK-P-24 Series 72 (6x2) polycrystalline silicon solar cells 56 x 56 mm 4 mm thick, tempered glass / AR coating glass TPT (Tedlar-PET-Tedlar) / BBF EVA (ethylene vinyl acetate) Anodized aluminium alloy, double wall 6 Bypass diodes serviceable IP65 rated MC4 or compatible connector Lenght: 200 mm / Section: 4.0 mm x 994 x 40 mm / 77. x 39.x 2.0 inches.5 kg / 67.2 lbs Wind Load: 2400Pa / Snow Load: 5400 Pa places 8-8x3 8-4x9 Mounting slots 2-Ø4 Ground holes 2 places Junction box Relative Efficiency The typical relative change in module efficiency at an irradiance of 200W/m² in relation to 000W/m² (both at 25 C and AM.5 spectrum) is less than 6% IV CURVE AT DIFFERENT IRRADIANCE LEVELS 6 5 Irradiance [W/m 2 ] PACKING CONFIGURATION Packing Configuration Quantity/Pallet Loading Capacity LDK-P-24 Series 20 pcs. / box 40 pcs. / pallet 440 pcs. / 40 ft (H) Tolerance of length and width dimensions is ± 2 mm Above graphics according to LDK-260P-24 LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. April 20/V2/ LDK Solar Limited. All rights reserved. E.&O.E Current [A] Voltage [V]

15 LDK SYSTEMS Residential kits As the photovoltaic sector moves towards grid parity economies must be made along the entire value chain. That s why a large integrated company like LDK now offers a complete kit for residential, agricultural and small commercial installations. LDK offers both an in roof, architectural solution for new build and BIPV applications and a high quality on roof solution. LDK s in roof solution fullfils the French criteria of integration of CEIAB (Comité d Evaluation l Intégration au Bâti). LDK will provide attractive full-black laminates and full-black modules to ensure an attractive look to our installations. BIPV architectural solutions Designed to meet French certification for 202 Possible to integrated inpitched roofs with a slope as low as 4 Solar tiles - simple and fast installation Reliable production and monitoring European quality First-class after sales service based in Europe ON roof quality solutions High-quality mounting system Excellent adaptability to all kind of roofs Black anodized module clamps Longevity of system Reliable production and monitoring European quality First-class after sales service based in Europe System Specifications Every kit consists of the following components: High performance full black monocrystalline modules High quality LDK Inverter for standard configurations LDK mounting system for both BIPV or on roof applications DC cable set All other accessories: data logger and display, system documentation NEW General characteristics for In Roof integration: Full black laminated modules with CSTB approved system Suitable to cover almost all types of coverage Roof slope > 4 (within the specifications if < 20 ) Landscape oriented modules Support profiles in extruded aluminum alloy (6060 T6) Custom Flashing System galvanized lacquered 75/00ths EPDM rubber seals dual hardness Cooling polymer glass fiber reinforced PP Anti tearing polymer PA General characteristics for On Roof installation: Full Black framed modules Suitable for most types of roof covering Roof slope up to 60 Wind load Up to m/s Snow load Up to,4 kn/m Portrait or landscape oriented modules Roof hooks and fasteners Stainless steel (V2A) System support rail in extruded aluminium (6063 T6) Electrical Characteristics: 85D-24(s) 87D-24(s) 90D-24(s) IEC: 000V / UL: 600 V 28 29

16 LDK SYSTEMS Powerplant Block LDK is building A strong PV projects businesses by leveraging A strong financing solution backed by THE China Development Bank. Uli Wiesmeier/Corbis melaniazilio.com EUROPE: LDK Europe NORTH AMERICA: SPI EUROPE: SGT CHINA: EPC & Pv Project Financial solution service Strong financing support from China Development Bank: 60 bilion credit line High quality, large volume, low-cost and bankable solar products Offer financial support to customer in different markets Local customer support from local teams Provide one-stop-shop solar energy solutions and services, which is especially important in less sophisticated emerging markets Proven business model and track record Increasing PV projects pipeline WE WILL MANAGE EVEN WITHOUT HELP 2 GW fully vertical integration industry from silicon to system SILICON INGOTS WAFERS CELLS MODULES PV SYSTEMS

17 HEADQUARTERS Jiangxi LDK Solar Hi-Tech Co., Ltd LDK Avenue, Economic Development Zone, Xinyu, Jiangxi, P.R. China Ph LDK SOLAR HI-TECH (SUZHOU) CO., LTD 6th Floor 368 Wuzhong Avenue, Wuzhong District, Suzhou City, P.R. China LDK SOLAR HI-TECH (NANCHANG) SO., LTD. No. 999 Torch Boulevard, Nanchang City, Jiangxi Province, P.R. China LDK SOLAR USA, INC. 290 Oakmead Parkway, Suite 6, Sunnyvale, CA USA Ph info.usa@ldksolar.com SPI - an LDK Company 5 Orlando Avenue, Rose Ville, CA USA Ph LDK SOLAR EUROPE HOLDING S.A 2F Rue Guillame Kroll, L-882 Luxembourg LDK SOLAR ITALY Via S. Martino, San Zenone degli Ezzelini, Treviso - Italy Ph info.it@ldksolar.com SOLAR GREEN TECHNOLOGY - an LDK Company Via Procaccini, Milano - Italy Ph LDK SOLAR GERMANY Landsberger Strasse Munich - Germany Ph info.de@ldksolar.com LDK SOLAR UK Ph info.uk@ldksolar.com LDK SOLAR FRANCE Ph info.fr@ldksolar.com LDK SOLAR SPAIN Ph info.es@ldksolar.com