PV MODULES 3.0 GW LDK SOLAR ENERGY SYSTEMS MODULES WAFER PRODUCTION CAPACITY

Size: px

Start display at page:

Download "PV MODULES 3.0 GW LDK SOLAR ENERGY SYSTEMS MODULES WAFER PRODUCTION CAPACITY"

Herbert Hart
6 years ago
Views:

1 PV MODULES LDK SOLAR ENERGY SYSTEMS MODULES 3.0 GW WAFER PRODUCTION CAPACITY

2 INTRODUCTION POLYSILICON:.000 MT TODAY MT BY END OF 0 CELLS: 80 MW TODAY.6 GW BY END OF 0 LDK Solar at NYSE LDK SOLAR THE WORLD S LARGEST VERTICALLY INTEGRATED MANUFACTURER BEST IN CLASS TECHNOLOGY AND COST EFFECTIVE June 007 INGOTS/WAFER: 3.0 GW TODAY 4.0 GW END OF 0 MODULES:.5 GW TODAY.5 GW END OF 0

VERTICAL INTEGRATION FORMULA GRID PARITY GW VERTICAL INTEGRATION + + ECOMOMIES OF SCALE & RAPID GROWTH HIGH QUALITY + HIGH EFFICIENCY PRODUCTS COMPETITIVE COST STRUCTURE = GRID PARITY LDK SOLAR LDK s

3 VERTICAL INTEGRATION FORMULA GRID PARITY GW VERTICAL INTEGRATION + + ECOMOMIES OF SCALE & RAPID GROWTH HIGH QUALITY + HIGH EFFICIENCY PRODUCTS COMPETITIVE COST STRUCTURE = GRID PARITY LDK SOLAR LDK s ATTRACTIVE GROWTH STRATEGIES PROVEN COST REDUCTION ROAD MAP LDK Silicon LDK Ingots LDK Wafer LDK Cells LDK Module IN-HOUSE PRODUCTION IN-HOUSE IN-HOUSE IN-HOUSE & OEM IN-HOUSE Produces solar and semiconductor grade polysilicon and chemicals.000 MT capacity today MT capacity by end of 0 - and mono-crystalline ingoting capabilities 3.0 GW capacity today 4.0 GW capacity by end of 0 World s largest wafering company 3.0 GW capacity today 4.0 GW capacity by end of 0 R&D and investment in process 80 MW capacity today.6 GW capacity by end of 0 Acquired best solar module capacity.5 GW capacity today.5 GW capacity by end of 0

facilities. The first facility has a planned installed annualized production capacity of 3.000 metric-ton.

The installation of a closed-loop production process has been completed in both facilities.

4 LDK POLYSILICON LDK POLYSILICON.000 MT today As part of our vertical integration strategy, LDK Solar constructed a polysilicon plant with two production facilities near our wafer production facilities. The first facility has a planned installed annualized production capacity of metric-ton. The second facility has three separate trains, each with a planned metric-ton annualized production capacity. The installation of a closed-loop production process has been completed in both facilities. Our closed-loop polysilicon production process is designed so that LDK Solar is able to produce and use many of the key chemicals and gases required to make silicon, such as TCS, HCI and hydrogen, while also recycling the residual STC. THE WORLD S LARGEST SINGLE POLYSILICON PLANT SITE TECHNICAL SPECIFICATION N Silicon Grade Semiconductor Grade Solar Grade N-Type Resistivity (u.cm) > 0 > P-Type Resistivity (u.cm) > 00 > 0 Carbon Content (atoms/cm 3 ) >.5xE6 >.5xE6

LDK INGOTS LDK INGOTS 3.0 GW today LDK WAFERS LDK WAFERS 3.

increase the utilization rates of our facilities thus reducing

For example, LDK Solar produced multicrystalline ingot weight of

Jiangxi province in China As the largest multicrystalline wafer

consistently delivering high quality solar wafers to our valued

We take pride in providing technologically advanced and reliable

At LDK Solar, we utilize state-of-the-art wafer processing

5 LDK INGOTS LDK INGOTS 3.0 GW today LDK WAFERS LDK WAFERS 3.0 GW todaty At LDK Solar, we produce larger monocrystalline and multicrystalline ingots. This innovation enables us to increase our yield of ingots and increase the utilization rates of our facilities thus reducing costs by reaching economies of scale. For example, LDK Solar produced multicrystalline ingot weight of 800 kg which will increase throughput production efficiencies by reducing manufacturing bottlenecks. Our ingot manufacturing facilities are located in Xinyu City in Jiangxi province in China As the largest multicrystalline wafer provider in the world, LDK Solar has an established track record of consistently delivering high quality solar wafers to our valued customers. We take pride in providing technologically advanced and reliable solar wafers. At LDK Solar, we utilize state-of-the-art wafer processing equipment combined with proprietary know-how that enables us to make efficient use of polysilicon and therefore lower the costs. Our wafer manufacturing facilities are located in Xinyu City in Jiangxi province in China. LARGER INGOTS PRODUCTION MEANS COSTS REDUCTION THE LARGEST MULTICRYSTALLINE WAFER PROVIDER IN THE WORLD

LDK CELLS LDK CELLS 80 MW today LDK MODULES LDK SOLAR MODULES.

efficiency of solar cells is one of the most effective drivers

We are currently in the process to complete our cell

working on developing new high-efficiency monocrystalline and

Manufacturing our own cells in-house will reduce the cost of

facilities Proven low-cost manufacturing High-quality,

6 LDK CELLS LDK CELLS 80 MW today LDK MODULES LDK SOLAR MODULES.5 GW today Manufacturing in-house PV cells and increasing the efficiency of solar cells is one of the most effective drivers to reduce the cost of PV modules. We are currently in the process to complete our cell manufacturing lines to produce our own cells in-house as well as working on developing new high-efficiency monocrystalline and multicrystalline cell technology. Manufacturing our own cells in-house will reduce the cost of modules, increase quality managament, and ensure a stable supply of cells. Vertically integrated manufacturing Large scale production facilities Proven low-cost manufacturing High-quality, high-efficiency products Leading global wafer supplier Diversified global customer base IN-HOUSE MANUFACTURING OF PV CELLS MAKING SOLAR ENERGY ACCESSIBLE FOR EVERYONE CAPACITY:.5 GW Today.5 GW By the end of MW April 00

MODULES MODULE QUALITY Manufactured under stringent quality contract standards: 0/+5 Wp power classification high conversion efficiency ability to withstand wind and snow load, and extreme

7 MODULES MODULE QUALITY Manufactured under stringent quality contract standards: 0/+5 Wp power classification high conversion efficiency ability to withstand wind and snow load, and extreme temperature variations rigorous quality control meeting the highest international standards industry leading 5 year warranty MODULES: RELIABLE MODULES FOR CUSTOMERS MODULE WARRANTY MODULE INSURANCE MUNICH-RE INSURANCE One of the most comprehensive warranties in the solar industry: materials and workmanship - covered for 5 years power rating - tight power tolerances within +/- 3% of the module nameplate rating start date - from the date of sale, not the date of manufacture transferability - transferable to future system owners unlike other standard warranties Banking institutions want protection guarantees on their investments as part of a debt financing package: Europe s largest insurance provider, Munich Re, provides an insurance solution which covers the performance warranty of modules protects our customers and their bankers over the 5 year warranty term strengthens customers project financing package by removing performance risk factor and doubt of warranty support MODULE RECYCLING Since beginning of 00 LDK Solar is proud member of PV Cycle Organization LDK Solar is committed to finding new ways to make our solar modules even more environmentally friendly, from increasing both cell and production efficiencies, to proactively adopting recycling programs for end-of-life PV modules

8 MONOCRYSTALLINE MODULES 60D-65D-70D-75D-80D-85D-90D-95D-00D-4 (S) NEW DIMENSIONS DIMENSIONS places 8-8x3 8-4x9 Mounting slots -Ø4 Ground holes places Junction box WHY LDK SOLAR MODULES Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured at ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification WARRANTIES 5 years for product defects in materials & workmanship years for 90% of warranted minimum power 5 years for 80% of warranted minimum power CERTIFICATES IEC: IEC 65, IEC 67 (&), conformity to CE UL703 00/03/5 Ed:3 Rev: 004/06/ ULC/ORD-C703-0 second edition 00/0/0 UL and Canadian standard for safety flat-plate ISO900:008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program PERFORMANCE AT LOW IRRADIANCE Relative Efficiency The typical relative change in module efficiency at an irradiance of 00W/m² in relation to 000W/m²(both at 5 C and AM.5 spectrum) is less than 6% IV CURVE AT DIFFERENT IRRADIANCE LEVELS 6 ) ELECTRIC CHARACTERISTICS (STC*) ELECTRICAL PERFORMANCE AT NOCT TEMPERATURE CHARACTERISTICS LDK-D-4 Series (s) NOCT** 45± C Temperature Coefficient of Pmax -0.47% / C Temperature Coefficient of Voc -0.34% / C Temperature Coefficient of Isc 0.06% / C Maximum Series Fuse Rating 0 A Operating Temperature -40 to +85 C Storage Temperature -40 to +60 C NOCT**: Nominal Operation Cell Temperature Sun 800 W/m ; Air 0 C; wind speed m/s MECHANICAL CHARACTERISTICS 60D-4(s) 65D-4(s) 70D-4(s) 75D-4(s) 80D-4(s) 85D-4(s) 90D-4(s) 95D-4(s) 00D-4(s) Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V] Current at Pmax (Imp) [A] Open Circuit Voltage (Voc) [V] The power tolerance is +/- 3% referred to the Nominal Output Maximum System Voltage IEC: 000V / UL: 600 V Cell Efficiency Module Efficiency STC* (Standard Test Conditions): Irradiance 000W/m, Module Temperature 5 C, Air Mass.5 60D-4(s) 65D-4(s) 70D-4(s) 75D-4(s) 80D-4(s) 85D-4(s) 90D-4(s) 95D-4(s) 00D-4(s) Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m, Module Temperature 45± C, Air Mass.5 LDK-D-4 Series (s) Solar Cells 7 (6x) monocrystalline silicon solar cells 5 x 5 mm Front Cover 3. mm thick, Tempered glass / AR coating glass Back Cover TPT (Tedlar-PET-Tedlar) / BBF Encapsulant EVA (Ethylene vinyl acetate) Frame Anodized aluminium alloy, double wall Diodes 6 Bypass diodes serviceable Junction Box IP65 rated Connector MC4 or compatible connector Cables Lenght: 9 mm / Section: 4.0 mm Dimension 580 x 808 x 40 mm / 6.4 x 3.8 x.6 inches (new dimensions) Weight 5.6 kg / 34.4 lbs Max. Load Wind Load: 400Pa / Snow Load: 5400 Pa 40 Tolerance of length and width dimensions is ± mm Current / A W/m² 800W/m² 600W/m² 400W/m² 00W/m² Voltage / V Above graphics according to LDK-75D-4(s) PACKING CONFIGURATION Packing Configuration Quantity/Pallet Loading Capacity LDK-D-4 Series (s) 5 pcs./box pcs./pallet 700 pcs. / 40 ft (H) module.sales@ldksolar.com LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. January 0/V/ LDK Solar Limited. All rights reserved. E.&O.E.

MONOCRYSTALLINE MODULES 00D-05D-0D-5D-0D-5-D-40D-45D-D-0 (S) NEW DIMENSIONS DIMENSIONS 976 4-0 0 4 places 8-8x3 8-4x9 Mounting slots -Ø4 Ground holes places Tolerance of length and width dimensions

9 MONOCRYSTALLINE MODULES 00D-05D-0D-5D-0D-5-D-40D-45D-D-0 (S) NEW DIMENSIONS DIMENSIONS places 8-8x3 8-4x9 Mounting slots -Ø4 Ground holes places Tolerance of length and width dimensions is ± mm Junction box WHY LDK SOLAR MODULES Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured at ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification Module performance reinsurance policy (Munich RE) WARRANTIES 5 years for product defects in materials & workmanship years for 90% of warranted minimum power 5 years for 80% of warranted minimum power CERTIFICATES IEC: IEC 65, IEC 67 (&), conformity to CE UL703 00/03/5 Ed:3 Rev: 004/06/ ULC/ORD-C703-0 second edition 00/0/0 UL and Canadian standard for safety flat-plate ISO900:008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program PERFORMANCE AT LOW IRRADIANCE The typical relative change in module efficiency at an irradiance of 00W/m² in relation to 000W/m²(both at 5 C and AM.5 spectrum) is less than 6% Current / A Relative Efficiency IV CURVE AT DIFFERENT IRRADIANCE LEVELS W/m² 800W/m² 600W/m² 400W/m² 00W/m² Voltage / V Above graphics according to LDK-0D-0(s) ) ELECTRIC CHARACTERISTICS (STC*) ELECTRICAL PERFORMANCE AT NOCT TEMPERATURE CHARACTERISTICS LDK-D-0 Series (s) NOCT** 45± C Temperature Coefficient of Pmax -0.47% / C Temperature Coefficient of Voc -0.34% / C Temperature Coefficient of Isc 0.06% / C Maximum Series Fuse Rating A Operating Temperature -40 to +85 C Storage Temperature -40 to +60 C NOCT**: Nominal Operation Cell Temperature Sun 800 W/m ; Air 0 C; wind speed m/s MECHANICAL CHARACTERISTICS Solar Cells (6x0) monocrystalline silicon solar cells 56 x 56 mm Front Cover 3. mm thick, Tempered glass / AR coating glass Back Cover TPT (Tedlar-PET-Tedlar) / BBF Encapsulant EVA (Ethylene vinyl acetate) Frame Anodized aluminium alloy, double wall Diodes 6 Bypass diodes serviceable Junction Box IP65 rated Connector MC4 or compatible connector Cables Lenght: 000 mm / Section: 4.0 mm Dimension 6 x 976 x 40 mm / 64. x 38.4x.6 inches (new dimensions) Weight 0 kg / 44. lbs Max. Load Wind Load: 400Pa / Snow Load: 5400 Pa PACKING CONFIGURATION 00D-0(s) 05D-0(s) 0D-0(s) 5D-0(s) 0D-0(s) 5D-0(s) D-0(s) 35D-0(s) 40D-0(s) 45D-0(s) D-0(s) Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V] Current at Pmax (Imp) [A] Open Circuit Voltage (Voc) [V] The power tolerance is +/- 3% referred to the Nominal Output Maximum System Voltage IEC: 000V / UL: 600 V Cell Efficiency Module Efficiency STC* (Standard Test Conditions): Irradiance 000W/m, Module Temperature 5 C, Air Mass.5 00D-0(s) 05D-0(s) 0D-0(s) 5D-0(s) 0D-0(s) 5D-0(s) D-0(s) 35D-0(s) 40D-0(s) 45D-0(s) D-0(s) Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m, Module Temperature 45± C, Air Mass.5 LDK-D-0 Series (s) LDK-D-0 Series (s) Packing Configuration 5 pcs./box Quantity/Pallet pcs./pallet Loading Capacity 700 pcs. / 40 ft (H) module.sales@ldksolar.com LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. January 0/V/ LDK Solar Limited. All rights reserved. E.&O.E.

10 POLYCRYSTALLINE MODULES 60P-65P-70P-75P-80P-85P-90P-95P-00P-4 (S) NEW DIMENSIONS 580 DIMENSIONS places 8-8x3 8-4x9 Mounting slots -Ø4 Ground holes Junction box WHY LDK SOLAR MODULES Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured at ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification WARRANTIES 5 years for product defects in materials & workmanship years for 90% of warranted minimum power 5 years for 80% of warranted minimum power CERTIFICATES IEC: IEC 65, IEC 67 (&), conformity to CE UL703 00/03/5 Ed:3 Rev: 004/06/ ULC/ORD-C703-0 second edition 00/0/0 UL and Canadian standard for safety flat-plate ISO900:008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program PERFORMANCE AT LOW IRRADIANCE places The typical relative change in module efficiency at an irradiance of 00W/m² in relation to 000W/m²(both at 5 C and AM.5 spectrum) is less than 6% Tolerance of length and width dimensions is ± mm Current / A Relative Efficiency IV CURVE AT DIFFERENT IRRADIANCE LEVELS W/m² 800W/m² 600W/m² 400W/m² 00W/m² Voltage / V Above graphics according to LDK-75P-4(s) ) ELECTRIC CHARACTERISTICS (STC*) ELECTRICAL PERFORMANCE AT NOCT TEMPERATURE CHARACTERISTICS LDK-P-4 Series (s) NOCT** 45± C Temperature Coefficient of Pmax -0.47% / C Temperature Coefficient of Voc -0.34% / C Temperature Coefficient of Isc 0.06% / C Maximum Series Fuse Rating 0 A Operating Temperature -40 to +85 C Storage Temperature -40 to +60 C NOCT**: Nominal Operation Cell Temperature Sun 800 W/m ; Air 0 C; wind speed m/s MECHANICAL CHARACTERISTICS Solar Cells 7 (6x) polycrystalline silicon solar cells 5 x 5 mm Front Cover 3. mm thick, Tempered glass / AR coating glass Back Cover TPT (Tedlar-PET-Tedlar) / BBF Encapsulant EVA (Ethylene vinyl acetate) Frame Anodized aluminium alloy, double wall Diodes 6 Bypass diodes serviceable Junction Box IP65 rated Connector MC4 or compatible connector Cables Lenght: 9 mm / Section: 4.0 mm Dimension 580 x 808 x 40 mm / 6.4 x 3.8 x.6 inches (new dimensions) Weight 5.6 kg / 34.4 lbs Max. Load Wind Load: 400Pa / Snow Load: 5400 Pa PACKING CONFIGURATION 60P-4(s) 65P-4(s) 70P-4(s) 75P-4(s) 80P-4(s) 85P-4(s) 90P-4(s) 95P-4(s) 00P-4(s) Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V] Current at Pmax (Imp) [A] Open Circuit Voltage (Voc) [V] The power tolerance is +/- 3% referred to the Nominal Output Maximum System Voltage IEC: 000V / UL: 600 V Cell Efficiency Module Efficiency STC* (Standard Test Conditions): Irradiance 000W/m, Module Temperature 5 C, Air Mass.5 60P-4(s) 65P-4(s) 70P-4(s) 75P-4(s) 80P-4(s) 85P-4(s) 90P-4(s) 95P-4(s) 00P-4(s) Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m, Module Temperature 45± C, Air Mass.5 LDK-P-4 Series (s) LDK-P-4 Series (s) Packing Configuration 5 pcs./box Quantity/Pallet pcs./pallet Loading Capacity 700 pcs. / 40 ft (H) module.sales@ldksolar.com LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. January 0/V/ LDK Solar Limited. All rights reserved. E.&O.E.

11 POLYCRYSTALLINE MODULES 00P-05P-0P-5P-0P-5P-P-35P-40P-45P-P-0 (S) NEW DIMENSIONS DIMENSIONS places 8-8x3 8-4x9 Mounting slots WHY LDK SOLAR MODULES Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured at ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification Module performance reinsurance policy (Munich RE) WARRANTIES 5 years for product defects in materials & workmanship years for 90% of warranted minimum power 5 years for 80% of warranted minimum power CERTIFICATES IEC: IEC 65, IEC 67 (&), conformity to CE UL703 00/03/5 Ed:3 Rev: 004/06/ ULC/ORD-C703-0 second edition 00/0/0 UL and Canadian standard for safety flat-plate PERFORMANCE AT LOW IRRADIANCE ISO900:008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program MCS The Microgeneration Certification Scheme UK -Ø4 Ground holes places The typical relative change in module efficiency at an irradiance of 00W/m² in relation to 000W/m²(both at 5 C and AM.5 spectrum) is less than 6% Junction box Relative Efficiency IV CURVE AT DIFFERENT IRRADIANCE LEVELS ) ELECTRIC CHARACTERISTICS (STC*) ELECTRICAL PERFORMANCE AT NOCT TEMPERATURE CHARACTERISTICS LDK-P-0 Series (s) NOCT** 45± C Temperature Coefficient of Pmax % / C Temperature Coefficient of Voc % / C Temperature Coefficient of Isc 0.06 % / C Maximum Series Fuse Rating A Operating Temperature -40 to +85 C Storage Temperature -40 to +60 C NOCT**: Nominal Operation Cell Temperature Sun 800 W/m ; Air 0 C; wind speed m/s MECHANICAL CHARACTERISTICS 00P-0(s) 05P-0(s) 0P-0(s) 5P-0(s) 0P-0(s) 5P-0(s) P-0(s) 35P-0(s) 40P-0(s) 45P-0(s) P-0(s) tnominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V] Current at Pmax (Imp) [A] Open Circuit Voltage (Voc) [V] The power tolerance is +/- 3% referred to the Nominal Output Maximum System Voltage IEC: 000V / UL: 600 V Cell Efficiency Module Efficiency STC* (Standard Test Conditions): Irradiance 000W/m, Module Temperature 5 C, Air Mass.5 00P-0(s) 05P-0(s) 0P-0(s) 5P-0(s) 0P-0(s) 5P-0(s) P-0(s) 35P-0(s) 40P-0(s) 45P-0(s) P-0(s) Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m, Module Temperature 45± C, Air Mass.5 LDK-P-0 Series (s) Solar Cells 60 (6x0) polycrystalline silicon solar cells 56 x 56 mm Front Cover 3. mm thick, Tempered glass / AR coating glass Back Cover TPT (Tedlar-PET-Tedlar) / BBF Encapsulant EVA (Ethylene vinyl acetate) Frame Anodized aluminium alloy, double wall Diodes 6 Bypass diodes serviceable Junction Box IP65 rated Connector MC4 or compatible connector Cables Lenght: 000 mm / Section: 4.0 mm Dimension 6 x 976 x 40 mm / 64. x 38.4x.6 inches (new dimensions) Weight 0 kg / 44. lbs Max. Load Wind Load: 400Pa / Snow Load: 5400 Pa Tolerance of length and width dimensions is ± mm Current / A 000W/m² 800W/m² 600W/m² 400W/m² 00W/m² Voltage / V Above graphics according to LDK-0P-0(s) PACKING CONFIGURATION Packing Configuration Quantity/Pallet Loading Capacity LDK-P-0 Series (s) 5 pcs./box pcs./pallet 700 pcs. / 40 ft (H) module.sales@ldksolar.com LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. January 0/V/ LDK Solar Limited. All rights reserved. E.&O.E.

POLYCRYSTALLINE MODULES 40P-45P-P-60P-65P-70P-75P-80P-85P-90P-4 (S) NEW DIMENSIONS WHY LDK SOLAR MODULES Industry leading module power output warranty International quality, safety and performance

12 POLYCRYSTALLINE MODULES 40P-45P-P-60P-65P-70P-75P-80P-85P-90P-4 (S) NEW DIMENSIONS WHY LDK SOLAR MODULES Industry leading module power output warranty International quality, safety and performance certifications Modules manufactured at ISO 900 certified factories High-reliability with guaranteed 0/+5W peak power classification WARRANTIES 5 years for product defects in materials & workmanship years for 90% of warranted minimum power 5 years for 80% of warranted minimum power CERTIFICATES IEC: IEC 65, IEC 67 (&), conformity to CE UL703 00/03/5 Ed:3 Rev: 004/06/ ULC/ORD-C703-0 second edition 00/0/0 UL and Canadian standard for safety flat-plate ISO900:008 Quality Management System CEC Listed: modules are elegible for California rebates PV Cycle: voluntary module take back and recycling program ELECTRIC CHARACTERISTICS (STC*) ELECTRICAL PERFORMANCE AT NOCT 40P-4(s) TEMPERATURE CHARACTERISTICS 40P-4(s) 45P-4(s) P-4(s) 55P-4(s) 60P-4(s) 65P-4(s) 70P-4(s) 75P-4(s) 80P-4(s) 85P-4(s) 90P-4(s) Nominal Output (Pmax) [W] Voltage at Pmax (Vmp) [V] Current at Pmax (Imp) [A] Open Circuit Voltage (Voc) [V] The power tolerance is +/- 3% referred to the Nominal Output Maximum System Voltage IEC: 000V / UL: 600 V Cell Efficiency Module Efficiency STC* (Standard Test Conditions): Irradiance 000W/m, Module Temperature 5 C, Air Mass.5 45P-4(s) P-4(s) 55P-4(s) 60P-4(s) 65P-4(s) 70P-4(s) 75P-4(s) 80P-4(s) 85P-4(s) 90P-4(s) Nominal Output (Pmax) Voltage at Pmax (Vmp) Current at Pmax (Imp) Open Circuit Voltage (Voc) NOCT: Irradiance 800 W/m, Module Temperature 45± C, Air Mass.5 LDK-P-4 Series (s) NOCT** 45± C Temperature Coefficient of Pmax % / C Temperature Coefficient of Voc % / C Temperature Coefficient of Isc 0.06 % / C Maximum Series Fuse Rating A Operating Temperature -40 to +85 C Storage Temperature -40 to +60 C NOCT**: Nominal Operation Cell Temperature Sun 800 W/m ; Air 0 C; wind speed m/s DIMENSIONS places 8-8x3 8-4x9 Mounting slots -Ø4 Ground holes places Tolerance of length and width dimensions is ± mm Junction box PERFORMANCE AT LOW IRRADIANCE The typical relative change in module efficiency at an irradiance of 00W/m² in relation to 000W/m²(both at 5 C and AM.5 spectrum) is less than 6% Current / A Relative Efficiency IV CURVE AT DIFFERENT IRRADIANCE LEVELS W/m² 800W/m² 600W/m² 400W/m² 00W/m² Voltage / V Above graphics according to LDK-60P-4(s) ) MECHANICAL CHARACTERISTICS Solar Cells Front Cover Back Cover Encapsulant Frame Diodes Junction Box Connector Cables Dimension Weight Max. Load PACKING CONFIGURATION Packing Configuration Quantity/Pallet Loading Capacity LDK-P-4 Series (s) 7 (6x) polycrystalline silicon solar cells 56 x 56 mm 4 mm thick, Tempered glass / AR coating glass TPT (Tedlar-PET-Tedlar) / BBF EVA (Ethylene vinyl acetate) Anodized aluminium alloy, double wall 6 Bypass diodes serviceable IP65 rated MC4 or compatible connector Lenght: 00 mm / Section: 4.0 mm 946 x 976 x mm / 77.0 x 38.4x.0 inches (new dimensions) 7.3 kg / 67. lbs Wind Load: 400Pa / Snow Load: 5400 Pa LDK-P-4 Series (s) 0 pcs./box 40 pcs./pallet 440 pcs. / 40 ft (H) module.sales@ldksolar.com LDK Solar reserves the right to make specifications changes without any prior notice. This data sheet complies with the EN 380 requirement. January 0/V/ LDK Solar Limited. All rights reserved. E.&O.E.

www.ldksolar.com JIANGXI LDK SOLAR, LTD LDK Avenue, Economic Development Zone, Xinyu, Jiangxi, 33803 P.R. - China LDK SOLAR HI-TECH (SUZHOU) CO.

998 TorchS Street, Nanchang City, Jiangxi Province, P.R.China - Tel. 086.79.80 65 - Fax 0086.79.80 860 LDK SOLAR EUROPE HOLDING S.A 4F Route d'esch L-086 - Luxembourg LDK SOLAR USA, INC.

13 JIANGXI LDK SOLAR, LTD LDK Avenue, Economic Development Zone, Xinyu, Jiangxi, P.R. - China LDK SOLAR HI-TECH (SUZHOU) CO., LTD 6 th Floor 368 Wuzhong Avenue, Wuzhong District, Suzhou City, P.R.China Tel Fax LDK SOLAR HI-TECH (NANCHANG) SO., LTD. No.998 TorchS Street, Nanchang City, Jiangxi Province, P.R.China - Tel Fax LDK SOLAR EUROPE HOLDING S.A 4F Route d'esch L Luxembourg LDK SOLAR USA, INC. 90 Oakmead Parkway, Suite 6, Sunnyvale, CA USA - info.usa@ldksolar.com - Ph LDK SOLAR GERMANY Landsberger Strasse Munich - Germany - Ph. +49 (89) info.de@ldksolar.com LDK SOLAR ITALY Via S. Martino, 5 0 San Zenone degli Ezzelini, Treviso - Italy - Tel info.it@ldksolar.com Via Giulio Cesare Procaccini, Milano - Italy - Tel LDK SOLAR FRANCE hugh.harris@ldksolar.com - Ph LDK SOLAR SPAIN oscar.artal@ldksolar.com - Ph

3.0 GW WAFER PRODUCTION CAPACITY

LIGHT OUR FUTURE PV MODULES LDK SOLAR ENERGY SYSTEMS MODULES 3.0 GW WAFER PRODUCTION CAPACITY INTRODUCTION POLYSILICON: 11.000 MT TODAY 25.000 MT BY END OF 2011 LDK SOLAR THE WORLD S LARGEST VERTICALLY