EZ-LIGHT CL50 Column Light Multi-Color General Purpose or Audible Indicators

Transcription

1 Multi- General Purpose or udible s Rugged, cost-effective, and easy-to-install multi-color indicators Illumination provides easy-to-see operator guidance and equipment status indication -, -, or -color models available vailable in black or light gray housing udible models available with standard, sealed, or omni-directional audible element ontinuous, pulsed, and staccato tones available 8 to 0V dc operation ompact devices are completely self-contained - no controller needed Immune to EMI and RFI interference No assembly required Non-udible Models Models s LED Function - Lights Independently Selected onnection L50GXXPQ Green - - L50GXXNQ Green - - NPN L50XRXPQ - Red - L50XRXNQ - Red - NPN -pin Euro integral QD connector L50GRXPQ Green Red - L50GRXNQ Green Red - NPN L50GRYPQ L50GRYNQ Green Red Yellow NPN udible Models Standard udible Models s LED Function Lights Independently Selected onnection L50GXXPQ Green L50GXXNQ Green NPN L50XRXPQ Red L50XRXNQ Red NPN 5-pin Euro integral QD connector L50GRXPQ Green Red L50GRXNQ Green Red NPN L50GRYPQ L50GRYNQ Green Red Yellow NPN NOTE: Sealed udible and Omni-Directional models are listed on the next page. Models with black housing are listed. For gray housing, add suffix at the end of the model number (cabled models) or before the Q (QD models), for example, L50GXXP or L50GXXPQ. ontact anner Engineering for other colors and color combinations. Integral QD models only are listed; mating cordset required (see ordsets on page ). For 50 mm (5.9 in) PV pigtail with QD, replace Q with QP in the model number, for example, L50GXXPQP. For m (6.5 ft) cable, omit suffix Q from the model number, for example, L50GXXP. Phone: Fax: Web: info@clrwtr.com

2 Sealed udible Models LED Function 5 - Lights Independently Selected ontinuous Pulsed at.6 Hz Staccato s onnection 6 L50GXXLSPQ L50GXXLSPQ L50GXXLSPQ Green - - L50GXXLSNQ L50GXXLSNQ L50GXXLSNQ Green - - NPN L50XRXLSPQ L50XRXLSPQ L50XRXLSPQ - Red - L50XRXLSNQ L50XRXLSNQ L50XRXLSNQ - Red - 5-pin Euro NPN integral QD L50GRXLSPQ L50GRXLSPQ L50GRXLSPQ Green Red - connector L50GRXLSNQ L50GRXLSNQ L50GRXLSNQ Green Red - NPN L50GRYLSPQ L50GRYLSPQ L50GRYLSPQ L50GRYLSNQ L50GRYLSNQ L50GRYLSNQ Green Red Yellow NPN Omni-Directional Sealed udible Models LED Function 5 - Lights Independently Selected ontinuous Pulsed at.6 Hz Staccato s onnection 6 L50GXXOSPQ L50GXXOSPQ L50GXXOSPQ Green - - L50GXXOSNQ L50GXXOSNQ L50GXXOSNQ Green - - NPN L50XRXOSPQ L50XRXOSPQ L50XRXOSPQ - Red - L50XRXOSNQ L50XRXOSNQ L50XRXOSNQ - Red - 5-pin Euro NPN integral QD L50GRXOSPQ L50GRXOSPQ L50GRXOSPQ Green Red - connector L50GRXOSNQ L50GRXOSNQ L50GRXOSNQ Green Red - NPN L50GRYOSPQ L50GRYOSPQ L50GRYOSPQ L50GRYOSNQ L50GRYOSNQ L50GRYOSNQ Green Red Yellow NPN Specifications Supply Voltage and urrent 8 to 0V dc (0% max. ripple) s: at 00 m max. current at 8V dc; 70 m max. current at 0V dc Standard udible larm: 5 m max. current Sealed udible larm: 5 m max. current Omni-Directional Sealed udible larm: 5 m max. current s Green, Red, Yellow; - colors, depending on model LEDs or audible alarm are independently selected Supply Protection ircuitry: Protected against reverse polarity and transient voltage Input Response Time ON/OFF: 0 ms (max.) udible djustment Standard udible larm: Unscrew the cover (up to.5 turns max.) to adjust the audible intensity. Do not exceed.5 turns or the cover may detach during operation. For max. intensity, rotate the center plug 80 counterclockwise to remove it Sealed udible larm: Rotate the front cover until the desired intensity is reached Omni-Directional Sealed udible larm: No adjustment Operating onditions: Non-udible: 0 to +50 ( 0 F to + F) Standard and Sealed udible: 0 to +50 ( F + F) Max. Rel. Humidity: 95% at +50 (non-condensing) udible larm udible measurements are made in the direction sound exits the device. For standard audible models, this is the top of the unit (when mounted vertically, sound is directed toward the ceiling). For sealed audible models, sound exits the vented openings in the side of the unit, which should be oriented so that the sound is directed toward the machine operator(s). In environments with high ambient noise levels or high ceilings that absorb sound, the sealed or omni-directional models are recommended. Standard udible larm:.7 KHz ± 500 Hz oscillation frequency; max. intensity 9 db at meter (typical) Sealed udible larm:.9 KHz ± 50 Hz oscillation frequency; max. intensity 9 db at meter (. ft) (typical) Omni-Directional Sealed udible larm:. KHz ± 50 Hz oscillation frequency; max intensity 99 db at m (. ft) (typical) onstruction: ases and overs: S Light Segment: Polycarbonate Models with black housing are listed. For gray housing, add at the end of the model number (cabled models) or before the Q (QD models), for example, L50GXXP or L50GXXPQ. 5 ontact anner Engineering for other colors and color combinations. 6 Integral QD models only are listed; mating cordset required (see ordsets on page ). For 50 mm (5.9 in) PV pigtail with QD, replace Q with QP in the model number, for example, L50GXXPQP. For m (6.5 ft) cable, omit suffix Q from the model number, for example, L50GXXP. Phone: Fax: Web: info@clrwtr.com

3 onnections Integral -pin or 5-pin M/Euro-style QD, 50 mm PV pigtail with QD, or m (6.5 ft) integral cable, depending on model Vibration and Mechanical Shock: ll models meet Mil. Std. 0F requirements method 0 (vibration: 0 to 60 Hz max., double amplitude 0.06 in, maximum acceleration 0G). lso meets IE 97-5-; 0G ms duration, half sine wave. Environmental Rating Non-udible and Sealed udible: IE IP67 Standard udible: IE IP50 ertifications Dimensions olumn Light Height (H) Non-udible Standard udible* Sealed udible Omni-Directional Sealed udible.mm (.5 in) 5.mm (5.7 in) 68.mm (6.6 in) 8.mm (7. in) *olumn Light (H) with top unscrewed approximately.5 mm to allow sound to escape Wiring Non-udible Models Sourcing () Input Sinking (NPN) Input Key 7 8-0V dc 8-0V dc = rown = White = lue = lack = = = Wiring udible Models Sourcing () Input Sinking (NPN) Input Key V dc 5 8-0V dc = rown = White = lue = lack 5 = Gray = = = = udible 7 If there is an X in the model number, that corresponding wire will not be used Phone: Fax: Web: info@clrwtr.com

4 Functional Truth Table: Models LED Function Pin (lack Wire) Pin (rown Wire) Pin (White Wire) ON +Vdc ON +Vdc ON +Vdc ON (color inhibits color ) +Vdc +Vdc ON (color inhibits color ) +Vdc +Vdc Pin (blue wire) connected to ground ( ) larm models: larm function is independent of light functions ON (color inhibits color ) +Vdc +Vdc ON (color inhibits colors & ) +Vdc +Vdc +Vdc Functional Truth Table: NPN Models LED Function Pin (lack Wire) Pin (lue Wire) Pin (White Wire) ON Vdc ON Vdc ON Vdc ON (color inhibits color ) Vdc Vdc ON (color inhibits color ) Vdc Vdc Pin (brown wire) connected to +Vdc larm models: larm function is independent of light functions ON (color inhibits color ) Vdc Vdc ON (color inhibits colors & ) Vdc Vdc Vdc ccessories ordsets -Pin Threaded M/Euro-Style ordsets Model Length Style Dimensions Pinout MQD-06 MQD-5 MQD-0 MQD-50.8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Straight Typ. M x ø.5 MQD-06R MQD-5R MQD-0R MQD-50R.8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Right-ngle Typ. [.6"] 0 Typ. [.8"] = rown = White = lue = lack M x ø.5 [0.57"] Phone: Fax: Web: info@clrwtr.com

5 5-Pin Threaded M/Euro-Style ordsets (Single Ended) Model Length Style Dimensions Pinout (Female) MQD-50.5 MQD-506 MQD-55 MQD-50 MQD-506R MQD-55R 0.50 m (.5 ft).8 m (6 ft).57 m (5 ft) 9. m (0 ft).8 m (6 ft).57 m (5 ft) Straight Typ. Typ. [.6"] M x ø.5 = rown = White = lue = lack 5 = Gray 5 Right-ngle 0 Typ. [.8"] MQD-50R 9. m (0 ft) M x ø.5 [0.57"] Mounting rackets ll measurements are in mm SM0 Right-angle bracket with curved slot for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor -ga. stainless steel Hole center spacing: to =0 Hole size: =ø 6., = 7. x 6., =ø SM0F Swivel bracket with tilt and pan movement for precise adjustment Mounting hole for 0 mm sensor -ga. 0 stainless steel Easy sensor mounting to extrude rail T-slot Metric and inch size bolt available olt thread: SM0F, = /8-6 x in; SM0FM0, = M0 -.5 x 50 Hole size: = ø 0. SM0MM SMMS0P 5 -ga. stainless steel bracket with curved mounting slots for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor Flat SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. 00 series stainless steel 9 Hole center spacing: = 5, to = 5. Hole size: =.6 x 7, = ø 6., = ø 0. Hole center spacing: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6.5, =ø.0 SMMS0R Right-angle SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. (.6 mm) cold-rolled steel SM0S Swivel bracket with 0 mm mounting hole for sensor lack reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included Hole center spacing: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6.5, =ø.0 Hole center spacing: =ø 50.8 Hole size: =ø 7.0, =ø 0.0 Phone: Fax: Web: info@clrwtr.com

6 LM Sealed Right-ngle racket Model Description onstruction LM0R lack polycarbonate LM0R Direct-Mount Models: racket kit with base, 0 mm adapter, set screw, fasteners, o-rings, and gaskets Gray polycarbonate LMER LMER Pipe-Mount Models: racket kit with base, ½- pipe adapter, set screw, fasteners, o-rings, and gaskets. For use with stand-off pipe (listed and sold separately) lack polycarbonate Gray polycarbonate Elevated Mount System Model Features omponents S-M0TE - lack cetal S-M0TE - White UHMW Streamlined black acetal or white UHMW stand-off pipe adapter/cover onnects between 0 mm light base and ½ in. NPSM/DN5 pipe Mounting hardware included Polished 0 Stainless Steel lack nodized luminum lear nodized luminum SOP-E-50SS 50 mm (6 in) long SOP-E-00SS 00 mm ( in) long SOP-E mm (6 in) long SOP-E mm ( in) long SOP-E mm (6 in) long SOP-E mm ( in) long Elevated-use stand-off pipe (½ in. NPSM/DN5) Polished 0 stainless steel, black anodized aluminum, or clear anodized aluminum surface ½ in. NPT thread at both ends ompatible with most industrial environments SOP-E-900SS 900 mm (6 in) long SOP-E mm (6 in) long SOP-E mm (6 in) long S-EM0 - lack cetal S-EM0 - White UHMW Streamlined black acetal or white UHMW mounting base adapter/cover onnects between ½ in. NPSM/DN5 pipe and 0 mm (-/6 in) drilled hole Mounting hardware included anner Engineering orp Limited Warranty anner Engineering orp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. anner Engineering orp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the anner product. THIS LIMITED WRRNTY IS EXLUSIVE ND IN LIEU OF LL OTHER WRRNTIES WHETHER EXPRESS OR IMPLIED (INLUDING, WITHOUT LIMITTION, NY WRRNTY OF MERHNTILITY OR FITNESS FOR PRTIULR PURPOSE), ND WHETHER RISING UNDER OURSE OF PERFORMNE, OURSE OF DELING OR TRDE USGE. This Warranty is exclusive and limited to repair or, at the discretion of anner Engineering orp., replacement. IN NO EVENT SHLL NNER ENGINEERING ORP. E LILE TO UYER OR NY OTHER PERSON OR ENTITY FOR NY EXTR OSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR NY INIDENTL, ONSE- QUENTIL OR SPEIL DMGES RESULTING FROM NY PRODUT DEFET OR FROM THE USE OR INILITY TO USE THE PRODUT, WHETHER RIS- ING IN ONTRT OR WRRNTY, STTUTE, TORT, STRIT LIILITY, NEGLIGENE, OR OTHERWISE. anner Engineering orp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by anner Engineering orp. Phone: Fax: Web: info@clrwtr.com