TL50BGYRQ 4 Blue, Green, Yellow, Red Integral 5-pin M12/Euro-style quick disconnect

Transcription

1 Datasheet Multi- General-Purpose or udible s Rugged, cost-effective, and easy-to-install multi-segment indicators Illuminated segments provide easy-to-see operator guidance and indication of equipment status Up to stacked colors available vailable in black or light gray housing udible models available with standard, sealed, or omni-directional audible element Compact devices are completely self-contained, no controller needed Models with to segments, V dc to 0 V dc or V ac operation Models with to segments, V dc to 0 V dc or V ac operation No assembly required Non-udible Models Model LED Connection Inputs TL0RQ Red TL0GRQ Green, Red Integral -pin M/Euro-style TL0GYRQ Green, Yellow, Red imodal (NPN or PNP) TL0GYRQ lue, Green, Yellow, Red Integral -pin M/Euro-style TL0WGYRQ White, lue, Green, Yellow, Red Integral -pin M/Euro-style udible Models Standard udible Model LED Connection Inputs TL0RQ Red TL0GRQ Green, Red Integral -pin M/Euro-style TL0GYRQ Green, Yellow, Red Integral -pin M/Euro-style imodal (NPN or PNP) TL0GYRQ lue, Green, Yellow, Red TL0WGYRQ White, lue, Green, Yellow, Red Integral -pin M/Euro-style Sealed udible Model Continuous Pulsed at. Hz Staccato LED Connection Inputs TL0RLSQ TL0RLSQ TL0RLSQ Red TL0GRLSQ TL0GRLSQ TL0GRLSQ Green, Red TL0GYRLSQ TL0GYRLSQ TL0GYRLSQ Green, Yellow, Red Integral -pin M/Eurostyle Integral -pin M/Eurostyle imodal (NPN or PNP) Models with black housing are listed. For gray housing, add the suffix "C" at the end of the cabled model number or before the "Q" in model numbers. For example, TL0RC or TL0RCQ. The first color listed is the bottom color, going up in successive order. Other available colors include: Turquoise (T), Orange (O), Violet (V), Sky lue (S) and Magenta (M). To order the 0 mm ( in) PVC cable model with a M/Euro-style, replace the suffix "Q" with "QP" in the model number. For example, TL0RQP. To order the m (. ft) PVC cable model, omit the suffix "Q" in the model number. For example, TL0R. Models with a require a mating cordset. Original Document 0 Rev. P 0 May 0 0

2 Sealed udible Model Continuous Pulsed at. Hz Staccato LED Connection Inputs TL0GYRLSQ TL0GYRLSQ TL0GYRLSQ lue, Green, Yellow, Red TL0WGYRLSQ TL0WGYRLSQ TL0WGYRLSQ White, lue, Green, Yellow, Red Integral -pin M/Eurostyle Omni-Directional Sealed udible Model Continuous Pulsed at. Hz Staccato LED Connection Inputs TL0ROSQ TL0ROSQ TL0ROSQ Red TL0GROSQ TL0GROSQ TL0GROSQ Green, Red TL0GYROSQ TL0GYROSQ TL0GYROSQ Green, Yellow, Red TL0GYROSQ TL0GYROSQ TL0GYROSQ lue, Green, Yellow, Red TL0WGYROSQ TL0WGYROSQ TL0WGYROSQ White, lue, Green, Yellow, Red Integral -pin M/Eurostyle Integral -pin M/Eurostyle Integral -pin M/Eurostyle imodal (NPN or PNP) Omni-Directional Sealed udible Model with Intensity djustment Continuous Pulsed at. Hz Staccato LED Connection Inputs TL0ROSIQ TL0ROSIQ TL0ROSIQ Red TL0GROSIQ TL0GROSIQ TL0GROSIQ Green, Red TL0GYROSIQ TL0GYROSIQ TL0GYROSIQ Green, Yellow, Red TL0GYROSIQ TL0GYROSIQ TL0GYROSIQ lue, Green, Yellow, Red TL0WGYROSIQ TL0WGYROSIQ TL0WGYROSIQ White, lue, Green, Yellow, Red Integral -pin M/Eurostyle Integral -pin M/Eurostyle Integral -pin M/Eurostyle imodal (NPN or PNP) Wiring Diagram -Pin Models with to Segments PNP Input -0V dc V ac NPN Input -0V dc V ac Key: = rown = White = lue = lack = C = C = = udible C/ C/ C/ C/ Pins and can activate the corresponding color or the audible function, if available. Sound exits at. - Tel: +--- P/N 0 Rev. P

3 Wiring Diagram -Pin Models with Segments C PNP Input -0V dc V ac C NPN Input -0V dc V ac Key: = rown = White = lue = lack = C = C = C = = udible C C C/ C/ Pin can activate the corresponding color or the audible function, if available. Wiring Diagram -Pin Models with Segments C C PNP Input -0V dc V ac C C NPN Input -0V dc V ac Key: = White = rown = Green = Yellow = Pink = lue = Red = C = C = C = C = = udible C C C/ C/ Pin can activate the corresponding color or the audible function, if available. Pins and are not used. P/N 0 Rev. P - Tel: +---

4 Wiring Diagram -Pin Models with to Segments C C PNP Input -0V dc V ac C C NPN Input -0V dc V ac Key: = White = rown = Green = Yellow = Pink = lue = Red = C = C = C = C = C = C = = udible C C C C C/ C/ C/ C/ Pins and can activate the corresponding color or the audible function, if available. Specifications Supply Voltage and Current Models with to segments: V dc to 0 V dc; or V ac (± V) at 0 Hz to 0 Hz (both lights and audible alarms are counted as segments) s maximum current per LED color: m at V to 0 V dc Models with to segments: V dc to 0 V dc or V ac (± V) at 0 Hz to 0 Hz (both lights and audible alarms are counted as segments) s maximum current per LED color: m at V dc m at 0 V dc 0 m at V ac Standard udible larm: m maximum current Sealed udible larm: m maximum current Omni-Directional Sealed udible larm: m maximum current Supply Protection Circuitry Protected against transient voltages Input Response Time On/Off: 0 milliseconds maximum udible larm Standard udible larm:. khz ± 00 Hz oscillation frequency; maximum intensity 9 d at m (. ft) (typical) Sealed udible larm:.9 khz ± 0 Hz oscillation frequency; maximum intensity 9 d at m (. ft) (typical) Omni-Directional Sealed udible larm:. khz ± 0 Hz oscillation frequency; maximum intensity 99 d at m (. ft) (typical) Omni-Directional Sealed udible larm with Intensity djustment:. khz ± 0 Hz oscillation frequency; maximum intensity 9 d at m (. ft) (typical) Typical Reduction in Sound Intensity with udible djustment (maximum to minimum) Standard udible: 0 d Sealed udible: 0 d Omni-Directional Sealed udible: d udible djustment Standard udible larm: Unscrew the cover (up to. turns maximum) to adjust the audible intensity. (Do not exceed. turns or the cover may detach during operation.) For maximum intensity, rotate the center plug 0 counterclockwise to remove it. Sealed udible larm and Omni-Directional Sealed udible larm with Intensity djustment: Rotate the front cover until the desired intensity is reached. Omni-Directional Sealed udible larm: No adjustment. s LEDs are independently selected; to colors depending on model Characteristics Dominant Wavelength (nm) or Temperature (CCT) Coordinates x y Lumen Output (Typical at C) Green nm.0 Red nm. Yellow 90 nm.0 lue 0 nm.0 Orange 0 nm. White 000 K.0 Turquoise Violet Magenta Sky lue Refer to CIE 9 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. - Tel: +--- P/N 0 Rev. P

5 Connections Integral -pin, -pin, or -pin M/Euro-style, 0 mm ( in) PVC cable with a M/Euro-style, or m (. ft) integral PVC cable depending on model Models with a require a mating cordset Construction ases and Covers: S Light Segment: Polycarbonate Vibration and Mechanical Shock Meets IEC 00-- requirements (Vibration: 0 Hz to Hz,.0 mm amplitude, minutes sweep, 0 minutes dwell) Meets IEC 00-- requirements (Shock: 0G ms duration, half sine wave) Operating Conditions Non-udible: 0 C to +0 C ( 0 F to + F) Standard and Sealed udible: 0 C to +0 C ( F to + F) 9% at +0 C maximum relative humidity (non-condensing) Environmental Rating UL Type X Indoor, Non-udible and Sealed udible: IEC IP Standard udible: IEC IP0 Certifications Required Overcurrent Protection WRNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class Power Supply. Supply wiring leads < WG shall not be spliced. For additional product support, go to Supply Wiring (WG) Required Overcurrent Protection (mps) Dimensions 0.0 [.9"] # of Tower Height (H) Non-udible Standard udible* Sealed udible Omni-Directional Sealed udible. mm (. in) 9.0 mm (. in). mm (. in) 9. mm (. in) H 0.9 mm (.0 in). mm (. in). mm (. in) 9. mm (. in). mm (. in). mm (. in) 9. mm (. in) 0. mm (. in) M0 x. (mounting nut included) Internal Threads / NPSM Max Torque. Nm [0in lbf] 9.0 [0."]. [0."]. mm (. in). mm (. in). mm (9. in). mm (9.9 in).0 mm (. in). mm (0.0 in).9 mm (0.9 in) 9. mm (. in). mm (0. in) 9. mm (. in). mm (. in). mm (. in) 0. mm (.0 in) * Tower height (H) with top unscrewed approximately. mm (0. in) to allow sound to escape ll measurements are listed in millimeters [inches], unless noted otherwise. ccessories Cordsets -Pin Threaded M/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-0. m ( ft) MQDC- MQDC-0. m ( ft) 9. m (0 ft) Straight Typ. MQDC-0. m (0 ft) M x ø. = rown = White = lue = lack P/N 0 Rev. P - Tel: +---

6 -Pin Threaded M/Euro-Style Cordsets Single Ended Model Length Style Dimensions Pinout (Female) MQD m (. ft) Typ. MQD-0 MQD- MQD-0. m ( ft). m ( ft) 9. m (0 ft) Straight M x ø. MQD-0R MQD-R MQD-0R. m ( ft). m ( ft) 9. m (0 ft) Right-ngle M x ø. [0."] Typ. [."] 0 Typ. [."] = rown = White = lue = lack -Pin Threaded M/Euro-Style Cordsets with Open-Shield Model Length Style Dimensions Pinout (Female) MQDCS-0 MQDCS-. m ( ft). m ( ft) Typ. MQDCS-0 MQDCS-0 9. m (0 ft). m (0 ft) Straight M x ø. MQDCS-0R. m ( ft) MQDCS-R MQDCS-0R MQDCS-0R. m ( ft) 9. m (0 ft). m (0 ft) Right-ngle M x ø. [0."] Typ. [."] 0 Typ. [."] = White = rown = Green = Yellow = Pink = lue = Red Mounting rackets SM0 Right-angle bracket with curved slot for versatile orientation Clearance for M (¼ in) hardware Mounting hole for 0 mm sensor -ga. stainless steel Hole center spacing: to =0 Hole size: =ø., =. x., C=ø 0. 9 C SM0F Swivel bracket with tilt and pan movement for precise adjustment Mounting hole for 0 mm sensor -ga. 0 stainless steel Easy sensor mounting to extrude rail T-slot Metric and inch size bolt available...9 olt thread: SM0F, = / - x in; SM0FM0, = M0 -. x 0 Hole size: = ø Tel: +--- P/N 0 Rev. P

7 SM0MM -ga. stainless steel bracket with curved mounting slots for versatile orientation Clearance for M (¼ in) hardware Mounting hole for 0 mm sensor 0 C SMMS0P Flat SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. 00 series stainless steel 9 C Hole center spacing: =, to =. Hole size: =. x, = ø., C = ø 0. Hole center spacing: =.0, to =.0 Hole size: =. x.0, =ø., C=ø.0 SMMS0R Right-angle SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. (. mm) cold-rolled steel C SM0SC Swivel bracket with 0 mm mounting hole for sensor lack reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included 9 Hole center spacing: =.0, to =.0 Hole size: =. x.0, =ø., C=ø.0 Hole center spacing: =ø 0. Hole size: =ø.0, =ø 0.0 ll measurements are listed in millimeters [inches], unless noted otherwise. LM Sealed Right-ngle racket Model Description Construction LM0R LM0RC Direct-Mount Models: racket kit with base, 0 mm adapter, set screw, fasteners, O-rings, and gaskets. lack polycarbonate Gray polycarbonate LMER LMERC Pipe-Mount Models: racket kit with base, ½- pipe adapter, set screw, fasteners, O-rings, and gaskets. For use with stand-off pipe (listed and sold separately). lack polycarbonate Gray polycarbonate Elevated Mount System Model Features Components S-M0TE - lack cetal Streamlined black acetal or white UHMW stand-off pipe adapter/cover S-M0TEC - White UHMW Connects between 0 mm light base and ½ in. NPSM/DN pipe Mounting hardware included Polished 0 Stainless Steel lack nodized luminum Clear nodized luminum SOP-E-0SS 0 mm ( in) long SOP-E-00SS 00 mm ( in) long SOP-E-0 0 mm ( in) long SOP-E mm ( in) long SOP-E-0C 0 mm ( in) long SOP-E-00C 00 mm ( in) long Elevated-use stand-off pipe (½ in. NPSM/DN) Polished 0 stainless steel, black anodized aluminum, or clear anodized aluminum surface ½ in. NPT thread at both ends Compatible with most industrial environments SOP-E-900SS 900 mm ( in) long SOP-E mm ( in) long SOP-E-900C 900 mm ( in) long S-EM0 - lack cetal Streamlined black acetal or white UHMW mounting base adapter/cover S-EM0C - White UHMW Connects between ½ in. NPSM/DN pipe and 0 mm (-/ in) drilled hole Mounting hardware included P/N 0 Rev. P - Tel: +---

8 Pipe Mounting Flange Pipe Mounting Flange Model Features Construction S-F For use elevated stand-off pipes (½ in, NPSM/DN) M mounting hardware and nitrile gasket included Die-cast zinc base with black paint /- NPSM 0 x ø. ø ø0 anner Engineering Corp. Limited Warranty anner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. anner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the anner product. THIS LIMITED WRRNTY IS EXCLUSIVE ND IN LIEU OF LL OTHER WRRNTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITTION, NY WRRNTY OF MERCHNTILITY OR FITNESS FOR PRTICULR PURPOSE), ND WHETHER RISING UNDER COURSE OF PERFORMNCE, COURSE OF DELING OR TRDE USGE. This Warranty is exclusive and limited to repair or, at the discretion of anner Engineering Corp., replacement. IN NO EVENT SHLL NNER ENGINEERING CORP. E LILE TO UYER OR NY OTHER PERSON OR ENTITY FOR NY EXTR COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR NY INCIDENTL, CONSEQUENTIL OR SPECIL DMGES RESULTING FROM NY PRODUCT DEFECT OR FROM THE USE OR INILITY TO USE THE PRODUCT, WHETHER RISING IN CONTRCT OR WRRNTY, STTUTE, TORT, STRICT LIILITY, NEGLIGENCE, OR OTHERWISE. anner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by anner Engineering Corp. ny misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. ny modifications to this product without prior express approval by anner Engineering Corp will void the product warranties. ll specifications published in this document are subject to change; anner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: anner Engineering Corp. ll rights reserved