EZ-LIGHT CL50 Column Light

Transcription

1 Datasheet Multi- General Purpose or udible s Rugged, cost-effective, and easy-to-install multi-color indicators Illumination provides easy-to-see operator guidance and equipment status indication -, -, or -color models available vailable in black or light gray housing udible models available with standard, sealed, or omni-directional audible element ontinuous, pulsed, and staccato tones available 8 V dc to 0 V dc operation ompact devices are completely self-contained, no controller needed No assembly required Non-udible Models Models LED onnection Inputs L50GXXPQ L50GXXNQ L50XRXPQ - Red - L50XRXNQ - Red - Integral -pin M/Euro-style L50GRXPQ quick disconnect L50GRXNQ L50GRYPQ Green Red Yellow L50GRYNQ Green Red Yellow udible Models Standard udible Models LED onnection Inputs L50GXXPQ Green L50GXXNQ Green L50XRXPQ Red L50XRXNQ Red Integral 5-pin M/Euro-style L50GRXPQ Green Red quick disconnect L50GRXNQ Green Red L50GRYPQ Green Red Yellow L50GRYNQ Green Red Yellow Models with black housing are listed. For gray housing, add the suffix "" at the end of the cabled model number or before the "Q" of quick disconnect model numbers. For example, L50GXXP or L50GXXPQ. vailable colors include: Green (G), Red (R), Yellow (Y), lue (), and White (W). ontact anner Engineering for other colors and color combinations. To order the 50 mm (6 in) PV cable model with a M/Euro-style quick disconnect, replace the suffix "Q" with "QP" in the model number. For example, L50GXXPQP. To order the m (6.5 ft) PV cable model, omit the suffix "Q" in the model number. For example, L50GXXP. Models with a quick disconnect require a mating cordset. Original Document 55 Rev. L 9 ugust 07 55

2 Sealed udible Models LED onnection Inputs ontinuous Pulsed at.6 Hz Staccato L50GXXLSPQ L50GXXLSPQ L50GXXLSPQ L50GXXLSNQ L50GXXLSNQ L50GXXLSNQ L50XRXLSPQ L50XRXLSPQ L50XRXLSPQ - Red - L50XRXLSNQ L50XRXLSNQ L50XRXLSNQ - Red - Integral 5-pin M/Eurostyle quick L50GRXLSPQ L50GRXLSPQ L50GRXLSPQ disconnect L50GRXLSNQ L50GRXLSNQ L50GRXLSNQ L50GRYLSPQ L50GRYLSPQ L50GRYLSPQ Green Red Yellow L50GRYLSNQ L50GRYLSNQ L50GRYLSNQ Green Red Yellow Omni-Directional Sealed udible Models LED ontinuous Pulsed at.6 Hz Staccato onnection Inputs L50GXXOSPQ L50GXXOSPQ L50GXXOSPQ L50GXXOSNQ L50GXXOSNQ L50GXXOSNQ L50XRXOSPQ L50XRXOSPQ L50XRXOSPQ - Red - L50XRXOSNQ L50XRXOSNQ L50XRXOSNQ - Red - Integral 5-pin M/Eurostyle quick L50GRXOSPQ L50GRXOSPQ L50GRXOSPQ disconnect L50GRXOSNQ L50GRXOSNQ L50GRXOSNQ L50GRYOSPQ L50GRYOSPQ L50GRYOSPQ Green Red Yellow L50GRYOSNQ L50GRYOSNQ L50GRYOSNQ Green Red Yellow Omni-Directional Sealed udible Models with Intensity djustment LED ontinuous Pulsed at.6 Hz Staccato onnection Inputs L50GXXOSIPQ L50GXXOSIPQ L50GXXOSIPQ L50GXXOSINQ L50GXXOSINQ L50GXXOSINQ L50XRXOSIPQ L50XRXOSIPQ L50XRXOSIPQ - Red - L50XRXOSINQ L50XRXOSINQ L50XRXOSINQ - Red - Integral 5-pin M/Eurostyle quick L50GRXOSIPQ L50GRXOSIPQ L50GRXOSIPQ disconnect L50GRXOSINQ L50GRXOSINQ L50GRXOSINQ L50GRYOSIPQ L50GRYOSIPQ L50GRYOSIPQ Green Red Yellow L50GRYOSINQ L50GRYOSINQ L50GRYOSINQ Green Red Yellow Wiring Diagrams Non-udible Models 8-0V dc KEY = rown = White = lue 8-0V dc KEY = rown = White = lue Key = rown = White = lue = = = If there is an "X" in the model number, the corresponding wire will not be used. - Tel: P/N 55 Rev. L

3 Wiring Diagrams udible Models 5 8-0V dc 5 8-0V dc Key = rown = White = lue 5 = Gray = = = = udible Functional Truth Table: Models LED Function Pin (lack Wire) Pin (rown Wire) Pin (White Wire) On +V dc On +V dc On +V dc On (color inhibits color ) +V dc +V dc On (color inhibits color ) +V dc +V dc Pin (blue wire) connected to ground ( ). larm models: larm function is independent of light functions. On (color inhibits color ) +V dc +V dc On (color inhibits colors & ) +V dc +V dc +V dc Functional Truth Table: Models LED Function Pin (lack Wire) Pin (lue Wire) Pin (White Wire) On V dc On V dc On V dc On (color inhibits color ) V dc V dc On (color inhibits color ) V dc V dc Pin (brown wire) connected to +V dc. larm models: larm function is independent of light functions. On (color inhibits color ) V dc V dc On (color inhibits colors & ) V dc V dc V dc P/N 55 Rev. L - Tel:

4 Specifications Supply Voltage and urrent 8 V dc to 0 V dc s: at 00 m maximum current at 8 V dc; 70 m maximum current at 0 V dc Standard udible larm: 5 m maximum current Sealed udible larm: 5 m maximum current Omni-Directional Sealed udible larm: 5 m maximum current Supply Protection ircuitry Protected against reverse polarity and transient voltage s LEDs or audible are independently selected Response Time On/Off: 0 milliseconds (maximum) haracteristics Dominant Wavelength (nm) or Temperature (T) Green 55 nm 7 Red 65 nm 8 Yellow 590 nm 0 lue 75 nm 8 White 5000 K 85 Lumen Output (Typical at 5 ) onnections Integral -pin or 5-pin M/Euro-style QD, 50 mm (6 in) PV cable with QD, or m (6.5 ft) integral cable, depending on model Operating onditions Non-udible: 0 to +50 ( 0 F to + F) Standard and Sealed udible: 0 to +50 ( F to + F) Maximum Relative Humidity: 95% at +50 maximum relative humidity (noncondensing) Environmental Rating NEM/UL Type Non-udible and Sealed udible: IE IP67 Standard udible: IE IP50 ertifications udible larm Standard udible larm:.7 KHz ± 500 Hz oscillation frequency; maximum intensity 9 db at meter (. ft) (typical) Sealed udible larm:.9 KHz ± 50 Hz oscillation frequency; maximum intensity 9 db at meter (. ft) (typical) Omni-Directional Sealed udible larm:. KHz ± 50 Hz oscillation frequency; maximum intensity 99 db at m (. ft) (typical) Omni-Directional Sealed udible larm with Intensity djustment:. KHz ± 50 Hz oscillation frequency; maximum intensity 95 d at m (. ft) (typical) udible djustment Standard udible larm: Unscrew the cover (up to.5 turns maximum) to adjust the audible intensity. Do not exceed.5 turns or the cover may detach during operation. For maximum intensity, rotate the center plug 80 counterclockwise to remove it. Sealed udible larm and Omni-Directional Sealed udible larm with Intensity djustment: Rotate the front cover until the desired intensity is reached Typical Reduction in Sound Intensity with udible djustment (maximum to minimum): Standard udible: 0 d Sealed udible: 0 d Omni-Directional Sealed udible: d onstruction ases and overs: S Light Segment: Polycarbonate Vibration and Mechanical Shock ll models meet Mil. Std. 0F requirements method 0 (vibration: 0 Hz to 60 Hz max., double amplitude 0.06 in, maximum acceleration 0G). lso meets IE 97-5-; 0G ms duration, half sine wave. Required Overcurrent Protection WRNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via urrent Limiting, lass Power Supply. Supply wiring leads < WG shall not be spliced. For additional product support, go to Supply Wiring (WG) Required Overcurrent Protection (mps) Tel: P/N 55 Rev. L

5 Dimensions Non-udible Standard udible* Sealed udible Omni-Directional Sealed udible olumn Light Height (H).mm (.5 in) 5.mm (5.7 in) 68.mm (6.6 in) 8.mm (7. in) *olumn Light (H) with top unscrewed approximately.5 mm to allow sound to escape ccessories ordsets -Pin Threaded M/Euro-Style ordsets Model Length Style Dimensions Pinout (Female) MQD-06 MQD-5 MQD-0 MQD-50 MQD-06R MQD-5R MQD-0R MQD-50R.8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft).8 m (6 ft).57 m (5 ft) 9. m (0 ft) 5. m (50 ft) Straight Right-ngle M x ø.5 [0.57"] Typ. Typ. [.6"] M x ø.5 0 Typ. [.8"] = rown = White = lue P/N 55 Rev. L - Tel:

6 5-Pin Threaded M/Euro-Style ordsets Single Ended Model Length Style Dimensions Pinout (Female) MQD-50.5 MQD-506 MQD-55 MQD m (.5 ft).8 m (6 ft).57 m (5 ft) 9. m (0 ft) Straight Typ. M x ø.5 MQD-506R MQD-55R MQD-50R.8 m (6 ft).57 m (5 ft) 9. m (0 ft) Right-ngle M x ø.5 [0.57"] Typ. [.6"] 0 Typ. [.8"] = rown = White = lue 5 = Gray 5 Mounting rackets SM0 Right-angle bracket with curved slot for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor -ga. stainless steel Hole center spacing: to =0 Hole size: =ø 6., = 7. x 6., =ø SM0F Swivel bracket with tilt and pan movement for precise adjustment Mounting hole for 0 mm sensor -ga. 0 stainless steel Easy sensor mounting to extrude rail T-slot Metric and inch size bolt available olt thread: SM0F, = /8-6 x in; SM0FM0, = M0 -.5 x 50 Hole size: = ø 0. SM0MM -ga. stainless steel bracket with curved mounting slots for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor SMMS0P Flat SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. 00 series stainless steel 9 5 Hole center spacing: = 5, to = 5. Hole size: =.6 x 7, = ø 6., = ø 0. Hole center spacing: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6.5, =ø.0 SMMS0R Right-angle SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. (.6 mm) cold-rolled steel SM0S Swivel bracket with 0 mm mounting hole for sensor lack reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included Hole center spacing: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6.5, =ø.0 Hole center spacing: =ø 50.8 Hole size: =ø 7.0, =ø 0.0 ll measurements are listed in millimeters [inches], unless noted otherwise Tel: P/N 55 Rev. L

7 LM Sealed Right-ngle racket Model Description onstruction LM0R LM0R Direct-Mount Models: racket kit with base, 0 mm adapter, set screw, fasteners, o-rings, and gaskets lack polycarbonate Gray polycarbonate LMER LMER Pipe-Mount Models: racket kit with base, ½- pipe adapter, set screw, fasteners, o-rings, and gaskets. For use with stand-off pipe (listed and sold separately) lack polycarbonate Gray polycarbonate Elevated Mount System Model Features omponents S-M0TE - lack cetal Streamlined black acetal or white UHMW stand-off pipe adapter/cover onnects between 0 mm light base and ½ in. NPSM/ S-M0TE - White UHMW DN5 pipe Mounting hardware included Polished 0 Stainless Steel lack nodized luminum lear nodized luminum SOP-E-50SS 50 mm (6 in) long SOP-E-00SS 00 mm ( in) long SOP-E mm (6 in) long SOP-E mm ( in) long SOP-E mm (6 in) long SOP-E mm ( in) long Elevated-use stand-off pipe (½ in. NPSM/DN5) Polished 0 stainless steel, black anodized aluminum, or clear anodized aluminum surface ½ in. NPT thread at both ends ompatible with most industrial environments SOP-E-900SS 900 mm (6 in) long SOP-E mm (6 in) long SOP-E mm (6 in) long S-EM0 - lack cetal Streamlined black acetal or white UHMW mounting base adapter/cover onnects between ½ in. NPSM/DN5 pipe and 0 mm S-EM0 - White UHMW (-/6 in) drilled hole Mounting hardware included Pipe Mounting Flange Pipe Mounting Flange Model Features onstruction S-F For use elevated stand-off pipes (½ in, NPSM/DN5) M5 mounting hardware and nitrile gasket included Die-cast zinc base with black paint /- NPSM 0 x ø5.5 ø8 ø70 5 anner Engineering orp. Limited Warranty anner Engineering orp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. anner Engineering orp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the anner product. THIS LIMITED WRRNTY IS EXLUSIVE ND IN LIEU OF LL OTHER WRRNTIES WHETHER EXPRESS OR IMPLIED (INLUDING, WITHOUT LIMITTION, NY WRRNTY OF MERHNTILITY OR FITNESS FOR PRTIULR PURPOSE), ND WHETHER RISING UNDER OURSE OF PERFORMNE, OURSE OF DELING OR TRDE USGE. This Warranty is exclusive and limited to repair or, at the discretion of anner Engineering orp., replacement. IN NO EVENT SHLL NNER ENGINEERING ORP. E LILE TO UYER OR NY OTHER PERSON OR ENTITY FOR NY EXTR OSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR NY INIDENTL, ONSEQUENTIL OR SPEIL DMGES RESULTING FROM NY PRODUT DEFET OR FROM THE USE OR INILITY TO USE THE PRODUT, WHETHER RISING IN ONTRT OR WRRNTY, STTUTE, TORT, STRIT LIILITY, NEGLIGENE, OR OTHERWISE. anner Engineering orp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by anner Engineering orp. ny misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. ny modifications to this product without prior express approval by anner Engineering orp will void the product warranties. ll specifications published in this document are subject to change; anner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: anner Engineering orp. ll rights reserved