EZ-LIGHT Touch Gen 2 K50 Series Illuminated Buttons
|
|
- Dale Allen
- 5 years ago
- Views:
Transcription
1 EZ-LIGHT Touch Gen K0 Series Illuminated uttons Datasheet Lighted Touch utton with ipolar Outputs Standard Model ompact Model Excellent immunity to false triggering by water spray, detergents, oils, and other foreign materials Rugged, cost-effective, and easy-to-install touch button with multicolor light versions remain activated as long as touch is present versions start up not activated and toggle between activated and not activated on successive touches Waterproof IE IP69K construction for washdown environments Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated switch operation; require no physical force to operate an be actuated with bare hands or gloves V dc to 0 V dc operation ompact models available for lower profile applications WRNING: Not To e Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Models Model Function Output Light (not activated) Light (activated) onnection K0LTXGHQ K0RLTXGHQ K0TXGHQ K0RTXGHQ ipolar, N.O. ipolar, N.. ipolar, N.O. ipolar, N.. - K0LTGGHQ K0RLTGGHQ K0TGGHQ K0RTGGHQ ipolar, N.O. ipolar, N.. ipolar, N.O. ipolar, N.. Integral -pin M/ Euro-style male quick disconnect (QD) K0LTRGHQ K0RLTRGHQ K0TRGHQ K0RTRGHQ ipolar, N.O. ipolar, N.. ipolar, N.O. ipolar, N.. Red Wiring Diagrams + -0V dc Load Load Not Used olor Key = rown = White = lue = lack To order the 0 mm (6 in) PV cable model with a -pin M/Euro-style quick disconnect, replace the suffix "Q" with "QP" in the model number. For example, K0LTXGHQP. To order the m (6. ft) PV cable model, omit the suffix "Q" in the model number. For example K0LTXGH. To order a compact model, add suffix "" after K0 in model number. For example, K0LTXGHQ. Models with a quick disconnect require a mating cordset. Original Document 8989 Rev. D June
2 EZ-LIGHT Touch Gen K0 Series Illuminated uttons Note: abled wiring diagrams are shown. Quick disconnect (QD) wiring diagrams are functionally identical. Specifications Supply Voltage V dc to 0 V dc Supply urrent < 7 m max current at V dc (exclusive of load) < 0 m max current at 0 V dc (exclusive of load) Supply Protection ircuitry Protected against reverse polarity and transient voltages Output Rating Maximum load: 0 m On-state saturation voltage: < V dc at 0 m; <. V dc at 0 m Off-state leakage current: <0 µ at 0 V dc Operating onditions 0 to +0 ( 0 F to + F) 90% at 0 maximum relative humidity (non-condensing) Storage 0 to +70 ( 0 F to +8 F) Environmental Rating IE IP67, IP69K per DIN abled models also meet IP69K if the cable and cable entrance are protected from high-pressure spray. Vibration and Mechanical Shock Vibration 0 Hz to Hz.0 mm p-p amplitude per IE Shock 0G ms duration, half sine wave per IE Output Response Time models: 0 milliseconds On and Off models: 0 milliseconds On and Off Power-Up Delay 00 milliseconds models start up in a 'not activated' state onnections -pin integral M/Euro-style QD, m (6. ft) PV integral cable, or -pin 0 mm (6 in) M/Euro-style PV cable QD ertifications Indicator Lumens olor Typical Wavelength Typical Intensity (lm) nm 9 Red 6 nm onstruction Housing: polycarbonate Translucent dome: polycarbonate Mounting nut: PT Mounting M0. threaded base max. torque. N m (0 in lbf) Required Overcurrent Protection WRNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via urrent Limiting, lass Power Supply. Supply wiring leads < WG shall not be spliced. For additional product support, go to Supply Wiring (WG) Required Overcurrent Protection (mps) Dimensions Standard Models ompact Models mm [.8 ] mm [.7 ] 66 mm [.6 ] 7 mm [0.67 ] 7.0 mm [.6 ] 8.0 mm [.89 ] Ø0 mm [.97 ] M0 x. Ø0 mm [.97 ] ll measurements are listed in millimeters [inches], unless noted otherwise. - Tel: P/N 8989 Rev. D
3 EZ-LIGHT Touch Gen K0 Series Illuminated uttons ccessories ordsets -Pin Threaded M/Euro-Style ordsets Single Ended MQD m (. ft) Typ. MQD-06.8 m (6 ft) MQD-.7 m ( ft) MQD-0 9. m (0 ft) ø. MQD-06R MQD-R MQD-0R.8 m (6 ft).7 m ( ft) 9. m (0 ft) Right-ngle Typ. [.6"] 0 Typ. [.8"] = rown = White = lue = lack ø. [0.7"] -Pin Threaded M/Euro-Style ordsets Washdown Stainless Steel MQD-WDSS m (6 ft) MQD-WDSS-0 MQD-WDSS-00.7 m ( ft) 9. m (0 ft) Ø. mm. mm Ø.8 mm = rown = White = lue = lack -Pin Threaded M/Euro-Style ordsets Washdown, with Shield MQDWD-06.8 m (6 ft) MQDWD-0 9. m (0 ft) Typ. [.6"] ø.0 [0.7"] = rown = White = lue = lack P/N 8989 Rev. D - Tel:
4 EZ-LIGHT Touch Gen K0 Series Illuminated uttons rackets SM0 Right-angle bracket with curved slot for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor -ga. stainless steel 6 69 SM0F 8. Swivel bracket with tilt and pan movement for precise adjustment Mounting hole for 0 mm sensor -ga. 0 stainless steel Easy sensor mounting to extrude rail T-slot Metric and inch size bolt available Hole center spacing: to =0 Hole size: =ø 6., = 7. x 6., =ø 0. olt thread: SM0F, = /8-6 x in; SM0FM0, = M0 -. x 0 Hole size: = ø 0. SM0FVK V-clamp, flat bracket and fasteners for mounting to pipe or extensions lamp accommodates 8 mm dia. tubing or in. square extrusions 0 mm hole for mounting sensors 6 8 SM0MM -ga. stainless steel bracket with curved mounting slots for versatile orientation learance for M6 (¼ in) hardware Mounting hole for 0 mm sensor Hole size: = ø Hole center spacing: =, to =. Hole size: =.6 x 7, = ø 6., = ø 0. SM0RVK V-clamp, right-angle bracket and fasteners for mounting sensors to pipe or extrusion lamp accommodates 8 mm dia. tubing or in. square extrusions 0 mm hole for mounting sensors 6 SM0S Swivel bracket with 0 mm mounting hole for sensor lack reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included Hole size: = ø 0. Hole center spacing: =ø 0.8 Hole size: =ø 7.0, =ø 0.0 SMMS0P Flat SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. 00 series stainless steel 9 SMMS0R Right-angle SMMS series bracket 0 mm hole for mounting sensors rticulation slots for 90 + rotation -ga. (.6 mm) cold-rolled steel 8 Hole center spacing: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6., =ø.0 Hole center spacing: =6.0, to =.0 Hole size: =6.8 x 7.0, =ø 6., =ø.0 T-K0-L Touch cover Ø Diameter: = 67 mm Height: =. mm - Tel: P/N 8989 Rev. D
5 EZ-LIGHT Touch Gen K0 Series Illuminated uttons anner Engineering orp. Limited Warranty anner Engineering orp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. anner Engineering orp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the anner product. THIS LIMITED WRRNTY IS EXLUSIVE ND IN LIEU OF LL OTHER WRRNTIES WHETHER EXPRESS OR IMPLIED (INLUDING, WITHOUT LIMITTION, NY WRRNTY OF MERHNTILITY OR FITNESS FOR PRTIULR PURPOSE), ND WHETHER RISING UNDER OURSE OF PERFORMNE, OURSE OF DELING OR TRDE USGE. This Warranty is exclusive and limited to repair or, at the discretion of anner Engineering orp., replacement. IN NO EVENT SHLL NNER ENGINEERING ORP. E LILE TO UYER OR NY OTHER PERSON OR ENTITY FOR NY EXTR OSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR NY INIDENTL, ONSEQUENTIL OR SPEIL DMGES RESULTING FROM NY PRODUT DEFET OR FROM THE USE OR INILITY TO USE THE PRODUT, WHETHER RISING IN ONTRT OR WRRNTY, STTUTE, TORT, STRIT LIILITY, NEGLIGENE, OR OTHERWISE. anner Engineering orp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by anner Engineering orp. ny misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. ny modifications to this product without prior express approval by anner Engineering orp will void the product warranties. ll specifications published in this document are subject to change; anner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: F Part and N IES- ()/NM-() This device complies with part of the F Rules and N IES- ()/NM-(). Operation is subject to the following two conditions:. This device may not cause harmful interference, and. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a lass digital device, pursuant to part of the F Rules and N IES- ()/NM-(). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. onnect the equipment into an outlet on a circuit different from that to which the receiver is connected. onsult the manufacturer. anner Engineering orp. ll rights reserved
EZ-LIGHT Touch K50 Series Illuminated Buttons
EZ-LIGHT Touch K0 Series Illuminated uttons Datasheet Lighted Touch utton with ipolar Outputs Rugged, cost-effective, and easy-to-install touch button with multicolor light versions remain activated as
More informationEZ-LIGHT K50 and K80 Specialty 3-Color
Datasheet ompact, single-point devices for error-proofing of bin-picking operations Rugged, cost-effective, and easy-to-install solutions for error-proofing and partsverification applications ompact devices
More information50 mm Programmable Multicolor RGB Indicator with Independent Momentary or Latching Touch Button Output
K0 Pro Touch utton Datasheet 0 mm Programmable Multicolor RG Indicator with Independent Momentary or Latching Touch utton Output Standard Model ompact Model Excellent immunity to false triggering by water
More informationTL50H High Brightness Tower Light
Datasheet Multi- General-Purpose or udible s Similar in design and construction to standard TL0 Tower Lights, but more than times brighter, improving visibility in areas with high levels of ambient light
More informationEZ-LIGHT CL50 Column Light
Datasheet Multi- General Purpose or udible s Rugged, cost-effective, and easy-to-install multi-color indicators Illumination provides easy-to-see operator guidance and equipment status indication -, -,
More informationEZ-LIGHT CL50 Column Light Multi-Color General Purpose or Audible Indicators
Multi- General Purpose or udible s Rugged, cost-effective, and easy-to-install multi-color indicators Illumination provides easy-to-see operator guidance and equipment status indication -, -, or -color
More informationOS80 Operator Stations
OS Operator Stations Key Operated Selector Switches and Mushroom Push uttons in an mm Lighted Housing Push utton Key Operated Selector Switch right, large illuminated window for increased visibility Rugged,
More informationK50 Series Pick-to-Light
Datasheet Self-Contained Indicator for Bin-Picking Operations To view or download the latest technical information about this product, including specifications, dimensions, accessories, and wiring, see
More informationEZ-LIGHT TL50 Beacon Tower Light
EZ-LIGHT TL0 eacon Tower Light Multi- General-Purpose or udible s The EZ-LIGHT TL0 eacon Tower Light is a cross between the TL0 tower light and the K0 beacon. This compact design is extremely intense and
More informationEZ-LIGHT TL50 Universal AC Voltage Tower Light Multi-Color General-Purpose or Audible Indicators
EZ-LIGHT TL0 Universal Voltage Tower Light Multi-olor General-Purpose or udible s Rugged, cost-effective, and easy-to-install multi-segment indicators Illuminated segments provide easy-to-see operator
More informationEZ-LIGHT TL50BLZ Beacon Universal AC Voltage Tower Light
EZ-LIGHT TL50LZ eon Universal Voltage Tower Light Datasheet Multi- General-Purpose or udible Indicators The EZ-LIGHT TL50 eon Tower Light is a cross between the TL50 tower light and the K50 beon. This
More informationEZ-LIGHT K50 and K80 Series Pick-to-Light Sensors
Datasheet Compact, Single-Point Devices for Error-Proofing of in-picking Operations To view or download the latest technical information about this product, including specifications, dimensions, accessories,
More informationEZ-LIGHT TL50C Compact Tower Light
Datasheet Multi- General-Purpose or udible s right, uniform lighted segments at only half the height of the standard TL0 models Rugged, cost-effective, and easy-to-install multi-segment indicators Illuminated
More informationTL50BGYRQ 4 Blue, Green, Yellow, Red Integral 5-pin M12/Euro-style quick disconnect
Datasheet Multi- General-Purpose or udible s Rugged, cost-effective, and easy-to-install multi-segment indicators Illuminated segments provide easy-to-see operator guidance and indication of equipment
More informationEZ-LIGHT TL50 Tower Light
EZ-LIGHT TL0 Tower Light Datasheet Multi- General-Purpose or udible s Rugged, cost-effective, and easy-to-install multi-segment indicators Illuminated segments provide easy-to-see operator guidance and
More informationEZ-LIGHT K50 & K80 Series Pick-to-Light Sensors
Compact, Single-Point Devices for Error-Proofing of Bin-Picking Operations QPMA EURO-STYLE PIGTAIL PUR CABLE CALL FACTORY Features Rugged, cost-effective and easy-to-install solutions for error-proofing
More informationWLS27 Dual Color LED Strip Light
WLS7 Dual Color LED Strip Light Datasheet Banner's WLS7 LED Strip Light has a sturdy aluminum housing and is encased in a shatterproof, UV-stabilized, copolyester shell, making it ideal for harsh indoor
More informationWLC60 Heavy Duty Stainless Steel LED Light
WLC60 Heavy Duty Stainless Steel LED Light Datasheet Banner's s are engineered to withstand harsh environments, making it the first choice for a machine lighting solution. A conservative mechanical design
More informationSLM Series Slot Sensors
Datasheet An easy-to-use, self-contained, opposed-mode sensor pair in a U-shaped housing Rugged, sealed, die-cast metal housing is rated IEC IP67 (NEMA 6) Easy and economical to mount; molded-in beam guides
More informationWLS28-2 Dual Color LED Strip Light
WLS8- Dual Color LED Strip Light Datasheet Banner s LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive environmental ratings, making them an ideal general-purpose LED
More informationEZ-LIGHT SP Series Signal Light
Datasheet Preassembled Indicators for Signaling Applications Intense levels of light output for outdoor applications Controlled field of view for signage and narrow lane use Rugged, cost-effective and
More informationEZ-LIGHT K50 Modbus Series Pick-to-Light Sensors
EZ-LIGHT K50 Modbus Series Pick-to-Light Sensors Datasheet Compact, single-point devices for error-proofing of bin-picking operations Fixed field and polarized retroreflective models Capacitive touch models
More informationWLB32 Industrial LED Light Bar (DC)
WLB Industrial LED Light Bar (DC) Datasheet Model without Motion Detector Model with Motion Detector Model with Eye Shield and Motion Detector Banner s WLB is an ultra-bright LED fixture that features
More informationQAL50 Series Analog Line Sensor
Datasheet Compact, self-contained analog- and discrete-output edge-guiding sensor Compact, self-contained design Analyzes and compares target object position or width, relative to a reflective strip Fast
More informationM18-3 Nickel-Plated Brass 18 mm Barrel Sensors
M8-3 Nickel-Plated Brass 8 mm Barrel Sensors Datasheet Next Generation of Self-Contained DC-Operated Sensors Complete family of sensors, all housed in the popular 8 mm threaded metal barrel Economical
More informationTL70 Modular Tower Light
Instruction Manual Banner's TL70 Tower Light is a 70 mm, modular LED indicator with extremely bright and uniform light. The modularity gives the user flexibility to customize tower lights as needed and
More informationD12 Series DIN Rail High Power Fiber Optic Sensor
Datasheet Powerful Self-Contained Sensors for Use with Glass or Plastic Fiber Optic Assemblies Fiber optic sensors for DIN rail mounting; cabled or quick disconnect (QD) Fast response: 500 μs standard,
More informationivu TG Gen2 Image Sensor with Integrated Display
Datasheet The ivu image sensor is used to monitor parts for type, size, orientation, shape, and location. The ivu TG Gen2 Image Sensor package consists of lighting, sensor, lens, and display. Appropriate
More informationQ4X Stainless Steel Analog Laser Sensor
Quick Start Guide Class laser CMOS analog sensor with an analog output. Patent pending. This guide is designed to help you set up and install the Q4X Analog Sensor. For complete information on programming,
More informationWORLD-BEAM Q12 Series Sensors
WORLD-BEAM Q2 Series Sensors Datasheet Miniature self-contained photoelectric sensors in universal housing Model Chemical- Resistant Model Bright, visible red (64 nm) light source models available with
More informationINTMOD485-LH Protocol Converter
For Use with L-GAGE LH Series Sensors Features Converts an LH Network to the 485-RTU protocol Supports baud rates up to 230,400 baud Supports LH Networks with up to 32 sensors Model Protocol Conversion
More informationL-GAGE Q50 Series with Analog Output
L-GAGE Q50 Series with Analog Output LED-Based Linear Displacement Sensor with Analog Output and TEACH-Mode Programming L-GAGE Q50 Analog Output Sensor Features Fast, easy-to-use TEACH-Mode programming;
More informationDF-G2 High Speed Expert Dual Display Small Object Counter
DF-G2 High Speed Expert Dual Display Small Object Counter Quick Start Guide Advanced sensor with dual digital displays for small object counting applications For complete technical information about this
More informationU-GAGE Q45U Ultrasonic Sensors
U-GAGE Q45U Ultrasonic Sensors Piezoelectric Proximity Mode Sensors with Push Button Programming of Sensing Window Limits Bipolar Discrete Outputs Features Analog models also available Models with other
More informationD11 Series: Visible Green, Blue or White LED Light Source
Datasheet Low cost self-contained sensors for use with plastic fiber optics Visible green, blue or white LD light source for use in color mark sensing and other lowcontrast sensing applications Low-cost,
More informationQ45U Ultrasonic Sensors
s Piezoelectric Proximity Mode Sensors with Push button Programming of Sensing Window Limits Features Ultrasonic proximity detection from 100 to 1400 millimeters (4 to 55 inches) Push button TEACH mode
More informationTL70 Wireless Communication Segment
Datasheet Sure Cross Wireless TL70 Tower Lights combine the best of Banner's popular Tower Light family with its reliable, field proven, Sure Cross wireless architecture. Benefits Enables machine monitoring
More informationECONO-BEAM Sensors. Miniature Self-Contained DC Sensors. ECONO-BEAM Features
OO-BM ensors Miniature elf-ontained D ensors OO-BM Features mall, low cost, self-contained sensors engineered to provide reliable sensing, primarily in straightforward OM applications imple installation
More informationD11 Expert Series: Visible Green, Blue or White LED Light Source
D11 Expert Series: Visible Green, Blue or White LED Light Source Datasheet Low-cost EACH-mode sensors for use with plastic fiber optics Visible green, blue or white LED light source for use in color mark
More informationSSA-EB Series Emergency Stop Push Button
Datasheet Illuminated safety US gateway compatible 0 mm mount electro-mechanical push buttons Designed to interface with Safety US nodes/gateways Rugged design; easy installation with no assembly or individual
More informationWORLD-BEAM QS186LE Laser Emitter
Class 1 and 2 Lasers for Use with Banner Modulated Photoelectric Receivers Self-contained Class 1 or Class 2 modulated visible laser diode emitters permit higher gain than LEDs and extended range in opposed-mode
More informationivu Bar Code Reader (BCR) Image Sensor with Integrated Display
ivu Bar Code Reader (BCR) Image Sensor with Integrated Display Datasheet The ivu Series Barcode Reader (BCR) sensor package consists of lighting, sensor, lens, and display. Appropriate cables and mounting
More informationQ45BW13 Series Sensors
Q45BW13 Series Senss Datasheet Universal voltage photoelectric senss with isolated solid-state output Advanced one-piece photoelectric senss with outstanding optical perfmance and extremely rugged design
More informationivu Plus TG Image Sensor with Integrated Display
Datasheet The ivu image sensor is used to monitor parts for type, size, orientation, shape, and location. The ivu Plus TG package consists of lighting, sensor, lens, and display. This version of the ivu
More informationPVD Series Parts Verification Sensor
Datasheet Diffuse or Retroreflective Sensor for Error Proofing of Bin-Picking Operations One-component system, easy to mount and even easier to use. Automatically operates in either diffuse or retroreflective
More informationQ45U Ultrasonic Sensors
Q45U Ultrasonic Sensors Piezoelectric Proximity Mode Sensors with Push button Programming of Sensing Window Limits Features Ultrasonic proximity detection from 100 to 1400 millimeters (4 to 55 inches)
More informationivu Barcode Reader (BCR) Image Sensor for use with a Remote Display
ivu Barcode Reader (BCR) Image Sensor for use with a Remote Display Datasheet The ivu Series Barcode Reader (BCR) sensor package consists of lighting, sensor, and lens. This version of the ivu BCR requires
More information3.3. Inductive Proximity Sensors. Contents Description. E57PS Performance Short Body Sensors. E57PS Performance Short Body Sensors..
. Product escription Features For demanding sensing 60 LE indicator applications in areas too small Stainless steel tube for standard length units, the 10 48 Vdc operating E57PS Performance Short ody series
More informationivu Plus TG Gen2 Series Image Sensor for use with a Remote Display
ivu Plus TG Gen2 Series Image Sensor for use with a Remote Display Datasheet The ivu image sensor is used to monitor parts for type, size, orientation, shape, and location. The ivu Plus TG package consists
More informationD11 Expert Series 5V dc Models
D11 Expert Series 5V dc Models Low cost teach-mode sensors for use with plastic fiber optics Low cost, 5V dc self-contained EACH mode sensors for use with all Banner plastic fiber optics Compact 11 mm-wide
More informationQC50 Series True Color Sensor
Compact, self-contained, three-output col-differentiating sens Features Two versions f application flexibility: QC50 models f most applications, and QCX50 models f me challenging applications Compact,
More informationWORLD BEAM QS18LLP Series
WORLD BEAM QS8LLP Series Miniature Polarized Retroreflective Laser Sensors Features Visible Class laser Narrow effective beam provides small-object detection and precise position control Crosstalk rejection
More informationVS2 Series Opposed-Mode Sensors
Opposed-Mode ensors Miniature self-contained sensors Features Totally self-contained miniature sensors 1 to 3V dc operation Visible red or infrared sensing beam, depending on model Up to 3 m (118") sensing
More informationQ5X Laser Triangulation Sensor with Background Suppression
Q5X Laser Triangulation Sensor with Background Suppression Quick Start Guide Class laser CMOS sensor with dual outputs and IO-Link. Patent pending. This guide is designed to help you set up and install
More informationS18-2 Plastic Barrel-Mount Sensors
PHOTOLTR FTURD RTGL RGHT GL BRRL 8-2 Plastic Barrel-Mount ensors self-contained powerful sensor with bright visible red emitter beam for easy alignment and set-up. vailable in multiple operating modes
More informationMINI-BEAM SM312F. MINI-BEAM Glass Fiber Optic. Output Type E X C E S S. A I N 1.01 m.033 ft. Bipolar NPN/PNP V dc E X.
MINI-BEAM Self-contained DC-operated Sensors for use with Banner Glass Fiber Optics Compact, modulated, self-contained infrared fiber optic sensors for 1-3V dc operation Useable in opposed, retroreflective,
More informationivu Plus BCR Gen2 Series Sensor for use with a Remote Display
ivu Plus BCR Gen2 Series Sensor for use with a Remote Display Datasheet The ivu Plus BCR package consists of lighting, sensor, and lens. This version of the ivu Plus BCR requires a Remote Display touch
More informationPVD Series Parts Verification Sensor
Diffuse or retroreflective sensor for error proofing of bin-picking operations DIFFUSE Visible Red, 630 nm RETRO Patent(s) issued or pending One-component system, easy to mount and even easier to use.
More informationSure Cross Vibration and Temperature Sensor
Datasheet The Sure Cross Vibration and Temperature Sensor works in a variety of machines to identify and predict failures in rotating machinery. Detects dual-axis vibration Provides high accuracy vibration
More informationDF-G2 High Speed Expert Dual Display Small Object Counter
DF-G2 High Speed Expert Dual Display Small Object Counter Quick Start Guide Advanced sensor with dual digital displays for small object counting applications For complete technical information about this
More informationWide-beam Divergent Mode Remote Sensor. Wiring rules
LP400WB Wide-beam Divergent Mode Remote Sensor The LP400WB is a wide-beam divergent proximity-mode remote sensor which is very useful for sensing small or irregularly shaped or transparent/translucent
More informationMINI-BEAM SMA31E/SM2A31R and SMA31EL/SM2A31RL
MINI-BEAM SMA31E/SM2A31R and SMA31EL/SM2A31RL Self-contained AC-operated Opposed Mode Sensors Compact, self-contained opposed mode modulated infrared sensor pairs for 24-24V ac operation Standard sensor
More informationLIGHTING & INDICATORS
LIGHTING & LED LIGHTING TOWER LIGHTS Lighting & Indicators Banner offers a wide variety of lighting and indicator solutions, including LED lighting, signal tower lights, indicators, touch buttons and pick-to-light
More informationQM26 and QMH26 Series Sensors
Instruction Manual Stainless Steel and Hygienic Stainless Steel Sensors for Washdown and Chemical Compatibility QM6: Washdown rated with convenient 5. mm ( in) mounting spacing and 3 mm (.5 in) mounting
More informationQ08 Series Opposed-Mode Sensors
Q8 eries Opposed-Mode ensors Low-profile infrared sensors in rugged metal housings Q8 eries Diffuse-Mode ensor Features Miniature right-angle dc photoelectric sensors in rugged die-cast metal housings
More informationMINI-BEAM SM2A312F. MINI-BEAM Glass Fiber Optic. Output Type E X C 100 E S S. A I N 1.01 m.033 ft. SPST Solid-state 2-wire E X E S S
MINI-BEAM Self-contained AC-operated Sensors for use with Banner Glass Fiber Optics Compact, modulated, self-contained infrared fiber optic sensors for 24-24V ac 2-wire operation Useable in opposed, retroreflective,
More informationTouch Panel Dimmer MH-P511. Introduction
Touch Panel Dimmer MH-P5 Introduction Touch Panel Dimmer is a wall switch with built-in Z-Wave module. It supports basic command class, association command class, which can control all associated devices
More informationInductive Proximity Sensors E57 Premium+ Series
1 ontents Overview.................... 1 Model Selection, Sensors....... 2 Model Selection, ompatible onnector ables............. 5 Wiring iagrams.............. 6 Specifications................. 7 Model
More informationU-GAGE T30UX Series with Analog Output
U-GAGE 3UX Series with Analog Output Ultrasonic Sensor with EACH-Mode Configuration 1, 2 and 3 m (3.28, 6.56, and 9.84 ft) versions with short dead zones (1% of max range) Built-in temperature compensation
More informationSSA-EB Series Emergency Stop Push Buttons
Datasheet Illuminated Safety BUS Gateway Compatible Flush Mount Electro-Mechanical Push Buttons Designed to interface with Safety BUS nodes/gateways Rugged design; easy installation with no assembly or
More informationToll Free: Tel: Fax:
Toll Free: 1-888-865-6888 Tel: 510-226-8368 Fax: 510-226-8968 Email: sales@rackmountmart.com User Manual LCDK 1070 DVI-D KVM Legal Information First English printing, October 2002 Information in this document
More informationCOBALT C INSTALLATION GUIDE RFID CONTROLLER ESCORT MEMORY SYSTEMS. High Frequency Passive Radio Frequency Identification Controller
ESCORT MEMORY SYSTEMS COBALT C0405-232-01 RFID CONTROLLER High Frequency Passive Radio Frequency Identification Controller INSTALLATION GUIDE How to Install and Configure Escort Memory Systems Cobalt C0405-232-01
More informationLIGHTING & INDICATORS
LIGHTING & INDICATORS LED LIGHTING TOWER LIGHTS INDICATORS T-Style indicators come in Banner s most popular sensor housings, using the same easy-to-mount brackets and style. They come in a variety of sizes
More informationColor Light gray Black Light gray Black 06 (binary coded decimal) --- A7CN A7CN-206 A7CN-206-1
Thumbwheel Switch 7N/7N-L SM_7N/7N-L_DS_E rand New Lineup of 7 Series ompact Thumbwheel Switches The series includes a complete range of locking-type models that prevent accidental operation. Ordering
More informationUniversal Charge & Sync Cabinet for Tablets/iPads - 10 Slot Charging Station with Lock and Fan
Universal Charge & Sync Cabinet for Tablets/iPads - 10 Slot Charging Station with Lock and Fan ST10CSU2A * This page is an addendum to the warning label found on the product. The Warning Label (250V/5A)
More informationLED..O..M Series Diffused On-Axis Lights
LED..O..M Series Diffused On-Axis Lights Uniform Lighting for Machine Vision Applications Features Diffused on-axis illumination for uniform lighting on specular surfaces Five light colors Two sizes available
More informationQS30 Series. Diffuse-Mode Laser Sensors. QS30 Laser Models. Supply Voltage. 2 m (6.5') 5-wire Cable. Integral 5-pin Euro-style QD.
QS3 Series Diffuse-Mode Laser Sensors QS3 Laser Features Visible laser beam for diffuse sensing Available with Class 1 or long-range Class 2 laser Excellent optical performance throughout sensing range,
More informationMINI-BEAM SM31E/SM31R and SM31EL/SM31RL
MINI-BEAM SM31E/SM31R and SM31EL/SM31RL Self-contained DC-operated Opposed Mode Sensors Compact, self-contained opposed mode modulated infrared sensor pairs for 1-3V dc operation Standard sensor pairs
More informationBulletin 871C Plastic Face/Plastic Barrel or Nickel-Plated Brass Barrel
ulletin 87 Plastic Face/Plastic arrel or ickel-plated rass arrel ulletin 87 inductive proximity sensors are self-contained, general purpose, solid-state devices designed to sense the presence of ferrous
More informationE2EY. A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Aluminum-detecting Proximity Sensor
Aluminum-detecting Proximity Sensor EEY CSM_EEY_DS_E_5_1 A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Non-ferrous metals, such as aluminum and brass, are detected.
More information5 B&W Rear View System Camera
5 B&W Rear View System Camera Instruction Manual MODEL: CA453 www.lorexcctv.com Copyright 2007 LOREX Technology Inc. Thank you for purchasing the Lorex 5 Black & White Rear View System Camera. This system
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS READ THIS MANUAL CAREFULLY! FAILURE TO INSTALL THIS EQUIPMENT PER THESE INSTRUCTIONS WILL VOID THE WARRANTY. AM16904-1 Rev. C pg. 1 of 12 SPECIAL NOTICES The following notices
More informationBluetooth Enabled Access Control MODEL BG-FE. Operating Instructions
BlueGuard FE Bluetooth Enabled Access Control MODEL BG-FE Operating Instructions CAUTION AND SAFETY INFORMATION IMPORTANT: If the equipment is used in a manner not specified in this manual, the protection
More informationOwner s Instruction Manual
Owner s Instruction Manual Advanced Healthcare Telephone Model 5150 Contents IMPORTANT SAFETY INSTRUCTIONS...3 BOX CONTENTS...4 FEATURES...4 ON/OFF SWITCH...4 DIAL BUTTONS...4 RECEIVER VOLUME CONTROL...4
More informationWristPC. WristPC Wearable Keyboard AZERTY Special (Version 2.0L and above) Copyright L3 Systems, Inc. Redmond, WA
WristPC WristPC Wearable Keyboard AZERTY Special (Version 2.0L and above) Copyright 1998-2007 L3 Systems, Inc. Redmond, WA Warranty L3 Systems guarantees this product to be free of defects in material
More informationSure Cross Wireless Q45 Sensor Node - Vibration/Temperature
Sure Cross Wireless Q45 Sensor Node - Vibration/Temperature Datasheet Sure Cross Wireless Q45 Sensors combine the best of Banner s flexible Q45 sensor family with its reliable, field-proven, Sure Cross
More informationMINI-BEAM SM2A312CV and SM2A312CV2
MINI-BAM M2A312CV and M2A312CV2 elf-contained AC-operated ensors Compact, modulated, self-contained convergent mode sensors for 24-24V ac operation Produces a precise 1.3 mm (.5 in) diameter sensing spot
More informationSensing method Appearance Connection method Sensing distance Model. Pre-wired (2 m) Power supply Application Appearance Function Model
Small Spot/Mark (Separate Amplifier) EC-VS/VM CSM_EC-VS/VM_DS_E_6_ Extremely thin beam ideal for detection of minute objects and marks Ideal for detection of small objects and slight color differences
More informationInnovative Circuit Technology Ltd.
Innovative Circuit Technology Ltd. Pro Series DC Power Supply INSTRUCTION MANUAL 855-343-001 Models: ICT690-12S/ICT690-12SB ICT690-24S/ICT690-24SB ICT690-48S/ICT690-48SB ICT1190-12S/ICT1190-12SB ICT1190-24S/ICT1190-24SB
More information92 Courtesy of Steven Engineering, Inc. - (800)
92 Touch Buttons Banner is the leader in ergonomic, visual and sealed operator touch buttons for industrial applications. Banner's Touch Buttons require no protective enclosure. A wide variety of mounting
More informationivu Plus Bar Code Reader (BCR) Image Sensor
With Integrated Display The ivu Plus BCR package consists of lighting, sensor, and lens, and display. This version of the ivu Plus has an integrated display to set up and monitor inspections. Appropriate
More informationMICRO-AMP System. MA3-4 and MA3-4P Modulated Amplifiers
MICRO-AMP System MA3-4 and MA3-4P Modulated Amplifiers Banner MICRO-AMP module models MA3-4 and MA3-4P are modulated amplifiers designed for use with the popular family of Banner high-performance remote
More informationE2KQ-X. Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster. Chemical-resistant Proximity Sensor. Ordering Information
Chemical-resistant Proximity Sensor E2KQ-X CSM_E2KQ-X_DS_E_4_3 Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster Excellent resistance against chemicals and oil with fluororesincoated case.
More informationContents. Volume 8 Sensing Solutions CA E January V8-T3-61
.9 Product escription pplication escription These unique Inductive Typical pplications Proximity Sensors by Eaton s electrical sector are designed Robotics to be used in extremely small spaces. wide variety
More informationXS/SC26-2 Safety Controller Quick Start Guide
XS/SC26-2 Safety Controller Quick Start Guide About this Guide This guide is designed to help you create a sample configuration for the XS/SC26-2 Safety Controller using the XS26-2 Expandable Safety Controller
More informationWCC100 IN-VEHICLE CHARGING CRADLE OWNER S MANUAL
WCC100 IN-VEHICLE CHARGING CRADLE OWNER S MANUAL 128-9237B WCC100 In-Vehicle Charging Cradle 12 03 13.indd 1 12/4/2013 10:38:04 AM 128-9237B WCC100 In-Vehicle Charging Cradle 12 03 13.indd 2 12/4/2013
More informationdedicated KVM switch and rackmount screen technology User Manual CV-1201D DVI-D KVM Designed and manufactured by Austin Hughes
dedicated KVM switch and rackmount screen technology User Manual CV-1201D DVI-D KVM Designed and manufactured by Austin Hughes 751 Legal Information First English printing, October 2002 Information in
More information2.5 inch Solid State Drive (SATA Type) PC-SSD2000S, PC-SSD4000S, PC-SSD8000S User s Guide CONTEC CO.,LTD.
2.5 inch Solid State Drive (SATA Type) PC-SSD2000S, PC-SSD4000S, PC-SSD8000S User s Guide CONTEC CO.,LTD. Thank you for purchasing the CONTEC PC-SSD-S Series. accordance with 2.5-inch SATA standard. described
More informationEZ-LIGHT. ø 50.0 mm 80.8 mm mm. Sensing Mode/LED Housing Range Connection Output Job Light. 2 m
INDICATORS ick-to- SENSORS INDICATOR LIGHTS Requires no controller to operate; completely self-contained Indicates job pick status with a large translucent dome containing one, two or three colored lights
More informationAQ-DM-5BT - DIGITAL MEDIA LOCKER OWNERS MANUAL. for Bluetooth & MP3 devices PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATION
products with a watertight reputation AQ-DM-5BT - DIGITAL MEDIA LOCKER for Bluetooth & MP3 devices OWNERS MANUAL PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATION Table of Contents
More information