More to Prior than meets the eye. Olympus. Automation Guide. 1 Olympus Automation Guide

Transcription

1 More to Prior than meets the eye Olympus Automation Guide 1 Olympus Automation Guide

2 Introduction This brochure is designed to provide an overview of the equipment we produce for a range of Olympus microscopes. Please note that the equipment in this guide is not an exhaustive list and instead shows the more common products that can be mounted on these microscopes. Additionally, other Olympus microscopes can have Prior equipment added to them. More information about our products can be found by contacting a Prior representative, ing uksales@prior.com or by visiting We also have an extensive collection of datasheets which are freely available on our website ( or via contacting Prior Scientific. The parts to be selected will depend both upon the microscope make and the end-user s application. We highly recommend contacting a Prior Sales Manager before ordering. At the end of this guide you will find a short explanation of our stage codes. Please note that the parts may vary in availability and part numbers and specifications may change without warning. Whilst we have attempted to verify that the information here is accurate, we cannot guarantee that it is completely up to date and error free; thus we suggest contacting Prior before ordering in order to ensure that all equipment will be compatible with your microscope and suitable for your application. The microscopes featured here are for illustrative purposes only. All intellectual property relating to these microscopes, including patents and trademarks, remain the property of their respective owners. Olympus is a registered trademark of Olympus Corporation. ProScan, OptiScan and ZDeck and the Prior Scientific logo are registered trademarks of Prior Scientific Ltd. The 5 year warranty applies to stages used with a Prior controller, for full details, terms and conditions of the warranty please visit Prior.com. This document is Prior Scientific Olympus Sales Brochure July 2017 V

3 Contents Olympus IX 73/83 3 Olympus BX series 7 Olympus BX51/61WI 11 Olympus MVX ProZ Stand (for MVX10, MX and BX microscopes) 19 Olympus MX Series 23 Stage Guide 27 Products listed in green on the systems charts require the ProScan III Control System to be operated 2 Olympus Automation Guide

4 IX73/83 Incubation chambers for NanoScanZ - W3719 (NZ400) (Control unit included) NanoScanZ Sample holders - NZ303 (NZ400) - NZ302 (NZ400) - NZ301 (NZ400) Motorised stages - H117P1XD - H117E1XD (Option to add extension wings - H117ACCM) Linear stages - HLD117IX Adapters - H H4101 Incubation chambers - W W4184 (Control unit included) Sample holders - H473XR - H223XRNC - H229XR -H224XRLP Focus Motor - PS3H122R + H807 - PS3H122R + H807 + H122KBIX (direct coupling) H139 Sample holders - H171XR - H223XR2 - H473R3 3 H139 Stages - H139P1XD - H139E1XD

5 IX73/83 NanoScan Z stages - NZ400 Brightfield - LDB102OL - LDB103OL Lumen L100###OL (Replace ### with wavelength) Filter wheels - HF110A + HF235 (Excitation) - HF110A + HF236 (Emission) - HF108A + HF235 (Excitation) - HF1081X3 (Emission on breadboard) Lumen L200SIX - L220SIX Breadboard (only) -H3948 Joystick Control Units -PS3J100 Controllers* - ES10ZE - V31XYZE - V31F - V31XYZEF - VLD31XYZ - VLD31XYZF *Compatible with most imaging software Shutters - HF200HT (Excitation) - HF201HT (Excitation) - HF202HT + HF235 (Excitation) - HF204HT + HF235 (Excitation) - HF204HT + HF238 (Transmitted) Lumen L200IX 4 Olympus Automation Guide

6 IX73/83 Product ES10ZE H117ACCM H117E1XD H117P1XD H122KBIX H139P1N4 H139E1N4 H171XR H223XRNC H223XR2 H224XRLP H229XR H3948 H4100 H4101 H473XR H473XR3 H807 HF108IX3 HF108A/HF235 HF110A/HF235 HF110A/HF236 HF200HT HF201HT HF202HT/HF235 HF204HT/HF238 HF204HT/HF235 HLD117IX L100###OL L200IX Details Focus only system controller Stage extension wings for H117 stage H117 motorised stage with 1mm screw pitch and encoders H117 motorised stage with 1mm screw pitch Direct Fine Focus coupling kit H139 motorised stage with 1 mm ballscrew, 400 stepper motor H139 motorised stage with 1 mm ballscrew, 400 stepper motor and 50 nm encoder 9 slide holder for H139 Extra recessed microtitre plate for H117 stages 2 micro titre plate holder for H139 Extra recessed low profile slide holder for H117 stages Extra recessed petri dish holder for H117 stages Olympus Breadboard Required for when adding a H117 stage on an IX73 with a motorised DIC unit Required for when adding a H117 stage on an IX83 with a motorised DIC unit Extra recessed low profile universal holder for H117 stages Double Universal sample holder for H139 Focus sleeve for IX and BX microscopes Breadboard filter wheel 8 position, 32mm diameter filter for Olympus IX3 Filter wheel holding 8 32 mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Emission) High speed shutter with 25mm aperture for use with filter wheel High speed shutter with 32mm aperture for use with filter wheel High speed shutter with 25mm aperture for stand alone use, with adapter (Excitation) High speed shutter with 32 mm aperture for stand alone use with adapter (Transmission) High speed shutter with 32mm aperture for stand alone use, with adapter (Excitation) Linear motor stage Single LED illumination system. Replace ### with wavelength required Metal Halide Illumination Source 5

7 IX73/83 Product L200SIX L220IX L220SIX LDB102OL LDB103OL NZ301 NZ302 NZ303 NZ400 PS3H122R PS3J100 V31F V31XYZE V31XYZEF VLD31XYZ VLD31XYZF W3561 W3569 W3719 W4184 Details Metal Halide Illumination Source with integral shutter. Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter and with extended UV/IR wavelengths Brightfield LED illumination (standalone) Brightfield LED illumination (controlled via ProScan) Well plate holder for NZ400 Slide/petri dish holder for NZ400 Slide holder for NZ400 Nanopositioning piezo Z stage with 400 um of travel and controller Focus drive Multifunctional manual joystick for ProScan ProScan Controller with three stepper drives for filters, shutters or a focus drive ProScan Controller with X Y Z drives and encoder capability ProScan controller with XYZ drives, three filter wheel drives, three shutter drives and encoder capability ProScan controller with XYZ drives for linear stage control ProScan controller with XYZ drives, three filter wheel drives, and three shutter drives for linear stage control. Incubation chamber for H117 stages Incubation chamber for NZ100/200 Incubation chamber for NZ400 Incubation chamber for H117 stages IMPORTANT: The IX83 is motorised and so a focus motor cannot be added to it The IX71 is similar in terms of which Prior equipment has been added, however the IX81 requires different stages (see the stage guide at the end of this booklet) 6 Olympus Automation Guide

8 BX53/BX63 Sample holders - H224LP - H473UP Motorised stages - H101BX - HIP4BX - HEP4BX - PL101BX 1 - PLE01BX 1,2 Slide Loader - PL PL238 2 OR PL PL304 NanoScanZ 3 - NZ200F Sample holder adapter Flat top stage sample holders - H224F - H234F Flat top Motorised stages - H101E1BX/B3 - H101P1BX/B3 - H101P2BX/B3 Brightfield - LDB102OL - LDB103OL B3 stages are for use with BX63 microscopes with pillar mounts. Focus Motor - PS3H122R + H807 - PS3H122R + H807 + H122KBIX (direct coupling) 7

9 BX53/BX63 Lumen L220SOL - L200SOL Filter wheels - HF108A/HF235 (Excitation) - HF110A/HF235 (Excitation) - HF110A/HF239 (Emission) Lumen L100###OL (Replace ### with wavelength) Shutters - HF200HT (Excitation) - HF201HT (Excitation) - HF202HT/HF235 (Excitation) - HF204HT/HF238 (Transmitted) - HF204HT/HF235 (Excitation) Lumen L220OL - L200OL Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Compatible with most imaging software Joystick Control Unit - PS3J100 8 Olympus Automation Guide

10 BX53/BX63 Product ES10ZE H101BX H101E1B3 H101E1BX H101P1B3 H101P1BX H101P2B3 H101P2BX H1P4BX H122KBIX H224F H224LP H234F H3848 H473UP H807 HEP4BX HF108A/HF235 HF110A/HF235 HF110A/HF239 HF200HT HF201HT HF202HT/HF235 HF204/HF238 HF204HT/HF235 L100###OL L200OL L200SOL L220OL L220SOL Details Focus only controller H101A stage with 2mm screw pitch and 200 step motor H101F flat top stage with 1 mm screw pitch, 200 step motors and encoders (BX63 with pillar mount only) H101F flat top stage with 1 mm screw pitch, 200 step motors and encoders H101F flat top stage with 1 mm screw pitch and 200 step motors (BX63 with pillar mount only) H101F flat top stage with 1mm screw pitch and 400 step motors H101F Flat top stage with 2mm screw pitch and 200 step motor (BX63 with pillar mount only) H101F flat top stage with 2mm screw pitch and 200 step motors. H101A stage with 1 mm screw pitch and 400 step motor Direct Fine Focus coupling kit Low profile slide holder for flat top stages Low profile slide holder Low profile slide holder (4 slides) for flat top stages Allows H101 sample holders to be fitted to a flat top stage Universal sample holder Focus sleeve for IX and BX microscopes H101A stage with 1mm screw pitch, 400 step motor and encoders Filter wheel holding 8 32mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Emission) High speed shutter with 25 mm aperture for use with filter wheel Excitation) High speed shutter with 32 mm aperture for use with filter wheel (Excitation) High speed shutter with 25 mm aperture for stand alone use (Excitation) High speed shutter with 32mm aperture for stand alone use (Transmitted) High speed shutter with 32 mm aperture for stand alone use (Excitation) Single LED illumination system. Replace ### with wavelength required Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths 9

11 BX53/BX63 Product Details LDB102OL Brightfield LED illumination (standalone) LDB103OL Brightfield LED illumination (controlled via ProScan) NZ200FCE Nanopositioning piezo Z stage with 200 µm of travel and controller; adapted for flat top stages PL101BX H101A stage for use with Slide Loader PLE01BX Encoded H101A stage for use with Slide Loader PL200 Slide Loader PL228 Bevel edged sample holder for 1 x 3 slides. Includes 4 slide racks for for 1 x 3 slides PL238 Bevel edged sample holder for 2 x3 slides. Includes 2 slide racks for 2 x 3 slides. PL304 Barcode reader for PL200 PLE01ABX Encoded H101A stage for use with Slide Loader (use with PL228 only) PS3H122R Focus drive PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input IMPORTANT: 1. The slide loader can only be used with the PL101ABX or PLE01ABX stages 2. The PLE01ABX is only for use with the PL NZ200F can only be used with flat top stages The BX63 is motorised so it is not possible to add focus motors to it 10 Olympus Automation Guide

12 BX51WI/BX61WI NanoScanZ Sample holders - NZ303 (NZ400) - NZ302 (NZ400) - NZ301 (NZ400) NanoScan Z stages - NZ400 Sample holders - H473XR - H223XRNC - H229XR -H224XRLP Motorised stages - H117P1XD - H117E1XD (Option to add extension wings- H117ACCM) Sample holders - H224LP - H473UP NanoScanZ 1 - NZ200F Z-Deck adapter HZ201 Z-Deck Sample Holders - HZ202 - HZ Z-Deck - ZDP 12MP - ZDP12ME - ZDP12MK - ZDP12MF - PS3H122R + H807 - PS3H122R + H807 + H122KBIX (direct coupling)

13 BX51WI/BX61WI Lumen L220SOL - L200SOL Filter wheels - HF108A/HF235 (Excitation) - HF110A/HF235 (Excitation) - HF110A/HF239 (Emission) Shutters - HF200HT (Excitation) - HF201HT (Excitation) - HF202HT/HF235 (Excitation) - HF204HT/HF238 (Transmitted) - HF204HT/HF235 (Excitation) Brightfield - LDB102OL - LDB103OL Lumen L220OL - L200OL Lumen L100###OL (Replace ### with wavelength) Controllers* - ES10ZE - V31XYZE - V31F - V31XYZEF *Compatible with most imaging software Joystick Control Unit - PS3J Olympus Automation Guide

14 BX51WI/BX61WI Product ES10ZE H117ACCM H117E1XD H117P1XD H122KBIX H223XRNC H224XRLP H229XR H224LP H471XR H472XR H473UP H499XR H807 HF108A/HF235 HF110A/HF235 HF110A/HF239 HF200HT HF201HT HF202HT/HF235 HF204/HF238 HF204HT/HF235 HZ201 HZ202 HZ204 L100###OL L200OL L200SOL L220OL L220SOL Details Focus only controller Stage extension wings for H117 stage H117 motorised stage with 1mm screw pitch and encoders H117 motorised stage with 1mm screw pitch Direct Fine Focus Coupling Extra recessed microtitre plate for H117 stages Extra recessed low profile slide holder for H117 stages Extra recessed petri dish holder for H117 stages Low profile slide holder Extra recessed slide insert for NZ100/200 Extra recessed 35mmpetri dish for NZ100/200 Universal sample holder Recessed Universal Specimen Holder (NZ100/200) Focus sleeve for IX and BX microscopes Filter wheel holding 8 32mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Emission) High speed shutter with 25 mm aperture for use with filter wheel (Excitation) High speed shutter with 32 mm aperture for use with filter wheel (Excitation) High speed shutter with 25 mm aperture for stand alone use (Excitation) High speed shutter with 32mm aperture for stand alone use (Transmitted) High speed shutter with 32 mm aperture for stand alone use (Excitation) Adapter allowing upright sample holders to be inserted into Z-Deck Solid Insert Plate for Z-Deck 110 mm ring insert plate for Z-Deck Single LED illumination system. Replace ### with wavelength required. Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths 13

15 BX51WI/BX61WI Product Details LDB102OL Brightfield LED illumination (standalone) LDB103OL Brightfield LED illumination (controlled via ProScan) NZ200FCE Nanopositioning piezo Z stage with 200 um of travel and controller; adapted for flat top stages NZ400 Nanopositoning piezo Z stage with 400 um of travel NZ301 Well plate holder for NZ400 NZ302 Slide/petri dish holder for NZ400 NZ303 Slide holder for NZ400 NZ400 Nanopositioning piezo Z stage with 400 um of travel and controller PS3H122R Focus drive and adapter PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input ZDP12MP Motorised Z-Deck quick adjust platform system ZDP12ME Motorised Z-Deck quick adjust platform system (Encoded) ZDP12MK Manual Z-Deck quick adjust platform system ZDP12MF Fixed plate Z-Deck quick adjust platform system IMPORTANT: NZ200F can only be used with the Z-Deck Z-Deck only suitable for BX51/61WI microscopes. 14 Olympus Automation Guide

16 MVX10 Sample holders - H224LP - H473UP Motorised stages 2 - H101BX - HIP4BX - HEP4BX Sample holder adapter H3848 NanoScanZ 1 - NZ200F Flat top Motorised stages 2 - H101E1BX - H101P1BX - H101P2BX Flat top stage sample holders - H224F - H234F Brightfield - LDB102OL - LDB103OL 15

17 MVX10 Filter wheels - HF108A/HF235 (Excitation) - HF110A/HF235 (Excitation) - HF110/32A/HF235 (Excitation) - HF110A/HF260 (Emission) - HF108A/HF260 (Emission) - HF110/32A/HF260 (Emission) Lumen L220SOL - L200SOL Shutters - HF200HT (Excitation) - HF201HT (Excitation) - HF202HT/HF235 (Excitation) - HF204HT/HF235 (Excitation) Lumen L100###OL (Replace ### with wavelength) Lumen L220OL - L200OL Controllers* - V31XYZE - V31F - V31XYZEF *Compatible with most imaging software Joystick Control Unit - PS3J Olympus Automation Guide

18 MVX10 Product H101BX H101E1BX H101P1BX H101P2BX H1P4BX H224F H224LP H234F H3848 H473UP HEP4BX HF108A/HF235 HF110A/HF235 HF110/32A/HF235 HF108A/HF260 HF110/32A/HF260 HF110A/HF260 HF200HT HF201HT HF202HT/HF235 HF204HT/HF235 HF260 L100###OL L200OL L200SOL L220OL L220SOL LDB102OL LDB103OL Details H101A stage with 2mm screw pitch and 200 step motor H101F flat top stage with 1 mm screw pitch, 200 step motors and encoders H101F flat top stage with 1mm screw pitch and 400 step motors H101F flat top stage with 2mm screw pitch and 200 step motors H101A stage with 1 mm screw pitch and 400 step motor Low profile slide holder for flat top stages Low profile slide holder Low profile slide holder (4 slides) for flat top stages Allows H101 sample holders to be fitted to a flat top stage Universal sample holder H101A stage with 1mm screw pitch, 400 step motor and encoders Filter wheel holding 8 32mm filters with adapter (Excitation) Filter wheel holding 10 25mm filters with adapter (Excitation) Filter wheel holding mm filters with adapter (Excitation) Filter wheel holding 8 32mm filters with adapter (Emission) Filter wheel holding mm filters with adapter (Emission) Filer wheel holding mm filters with adapter (Emission) High speed shutter with 25 mm aperture for use with filter wheel (Excitation) High speed shutter with 32 mm aperture for use with filter wheel Excitation) High speed shutter with 25 mm aperture for stand alone use (Excitation) High speed shutter with 32 mm aperture for stand alone use (Excitation) Adapter for emission (mounts under trinocular head) Single LED illumination system. Replace ### with wavelength required Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wave lengths Brightfield LED illumination (standalone) Brightfield LED illumination (controlled via ProScan) 17

19 MVX10 Product Details NZ200F Nanopositioning piezo Z stage with 400 um of travel and controller; adapted for flat top stages PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input IMPORTANT: 1 NZ200F can only be used with flat top stages 2 To mount this stage, please use a SZX-STAD2 base (available from Olympus) 18 Olympus Automation Guide

20 ProZ Stand Shutters - HF200HT (Excitation) - HF201HT (Excitation) - HF202HT/HF235 (Excitation) - HF204HT/HF238 (Transmitted) - HF204HT/HF235 (Excitation) Filter wheels - HF108A/HF235 (Excitation) - HF110A/HF235 (Excitation) - HF110A/HF239 (Emission) Lumen L220OL - L200OL Adapter for MVX series Lumen L100###OL Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Compatible with most imaging software - ZCAMVX -ZCAMVXS (for use with ZC12EL, contact Prior if using SZX microscope) Pillar Mounting Adapter -ZC12FLNG Lumen L220SOL - L200SOL Joystick Control Units - PS3J100 Clamping Arms 19

21 ProZ Stand Brightfield - LDB102OL - LDB103OL ProZ Stand - ZC12 - ZC12EL - ZC12FL Adapter for BX/MX series - ZCABX Large Format Motorised stages - H116/2 - HE16/2 - H112/2ST - HE12/2ST8 Mounting stand - H413 - H414 (for use with ZC12EL) Focus Blocks - FB201 - FB203 - FB204/E - FB205/E - FB206/E Adapter for BX -HP1770 Stage mount -ZCBRL -ZCBTL (for transmitted light, BX only) Motorised stages - H101 - HIP4 - HEP4 -H105/N2F Sample holders - H224LP (H101 stages) - H473UP (H101 stages) - H230 (H101 stages) - H220 (H101 stages) - H227 (H105 stages) - H231 (H105 stages) - H225 (H116 stages) - H232 (H116 stages) - H233 (H112 stages) - H221 (H112 stages) 20 Olympus Automation Guide

22 ProZ Stand Product Details ES10ZE Focus only controller FB201 Manual focussing block FB203 Motorised Linear Axis FB204 Motorised focus holding an incident light Prior stage; with flanges for fitting to optical table FB204E As above with Encoders FB205 Motorised focus with offset base holding an incident light Prior stage with flanges for fitting to optical table FB205E As above with encoders FB206 Motorised focus holding a transmitted light Prior stage with flanges for fitting to optical table FB206E As above with encoders H101 H101A stage with 2mm screw pitch and 200 step motor H105/N2F Large format stage with 154 x 154 mm travel range, 200 step motors and 2 mm screw pitch H112/2ST Large format stage with 302 x 302 mm travel range, 200 stepper motor and 2 mm screw pitch H116/2 Large format stage with 255 x 215 mm travel range, 200 stepper motor and 2 mm screw pitch H1P4 H101A stage with 1 mm screw pitch and 400 step motor H220 Glass plate (H101 stages) - not suitable for transmitted microscopy H221 Glass plate (H112 stages) - not suitable for transmitted microscopy H224LP Low profile slide holder (H101 stages) H225 Glass plate (H116 stages) - not suitable for transmitted microscopy H227 Glass plate (H105 stages) - not suitable for transmitted microscopy H230 Aluminium plate (H101 stages) H231 Aluminium plate (H105 stages) H232 Aluminium plate (H116 stages) H233 Aluminium plate (H112 stages) H413 Mounting stand for H105 or H101 stage H414 Mounting stand for H112 or H116 stage H473UP Universal sample holder (H101 stages) HE05/2 Encoded variant of H105/2 HE12/2ST Encoded variant of H112/2ST HE16/2 Encoded variant of H116/2 HEP4 H101A stage with 1mm screw pitch, 400 step motor and encoders HF108A/HF235 Filter wheel holding 8 32mm filters with adapter (Excitation) HF110A/HF235 Filter wheel holding 10 25mm filters with adapter (Excitation) HF110A/HF239 Filter wheel holding 10 25mm filters with adapter (Emission) HF200HT High speed shutter with 25 mm aperture for use with filter wheel (Excitation) 21

23 ProZ Stand Product HF201HT HF202HT/HF235 HF204/HF238 HF204HT/HF235 HP1770 L100###OL L200OL L200SOL L220OL L220SOL LDB102OL LDB103OL PS3J100 V31F V31XYZE V31XYZEF ZC12 ZC12EL ZC12FL ZC12FLNG ZCABX ZCAMVX ZCAMVXS ZCBCK ZCBRL ZCBTL Details High speed shutter with 32 mm aperture for use with filter wheel (Excitation) High speed shutter with 25 mm aperture for stand alone use (Excitation) High speed shutter with 32mm aperture for stand alone use (Transmitted) High speed shutter with 32 mm aperture for stand alone use (Excitation) Adapter for BX microscopes Single LED illumination system. Replace ### with wavelength required. Metal Halide Illumination Source Metal Halide Illumination Source with integral shutter. Metal Halide Illumination Source with extended UV/IR wavelengths Metal Halide Illumination Source with integral shutter with extended UV/IR wavelengths Brightfield LED illumination (standalone) Brightfield LED illumination (controlled via ProScan) Multifunctional manual joystick for ProScan ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters ProScan controller with XYZ drives and encoder input ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input Motorised Z column with 500 mm 2 base and 250 mm of travel Motorised Z column with approx 600 x 750 mm base and 250 mm of travel Motorised Z column with no base and 250 mm of travel Adapter for mounting ZC12FL to optical mounting table Optical mounting arm for RFA illumination (BX series only) Optical mounting arm for MVX-10 Extended arm for MVX-10 Universal clamping kit for illumination bases H101, H105 stage mount reflected light only. Add HP1770 for manual stage dovetail option Prior H101, H105 stage mount transmitted light. Accepts 50mm diffuser/filter. Includes Prior LDB101 LED light source Notes Note that H116 and H112 stages require ZC12EL and H Olympus Automation Guide

24 MX Large Format Motorised stages 300 x 300 mm - H112/2ST - HE12/2ST Large Format Motorised stages 154 x 154 mm - H105/N2F Sample holders for H105 stages - HWC15SNL (H105) - HWC15VNL (H105) - H231 (H105) - H227 (H105) Large Format Motorised stages 255 x 215 mm - H116/2 - HE16/2 23

25 MX Sample holders for H112 stages - H233 (H112) - H233B (H112) - H221 (H112) - HWC30S (H112) Laser Autofocus - LF210 - LF100K - LF335 Brightfield - LDB102OL - LDB103OL Focus Motor - PS3H122R + H807 Sample holders for H116 stages - H225 (H116) - H232 (H116) - HWC20S (H116) - HWC20V (H116) Controllers - ES10ZE - V31XYZE - V31F - V31XYZEF Compatible with most imaging software Joystick Control Unit - PS3J Olympus Automation Guide

26 MX Product Details ES10ZE Focus only controller H105/N2F Stage with 154 x 154 mm travel range and 2 mm ball screw H116/2 Stage with 225 x 215 mm travel range and 2 mm ball screw HE16/2 As above with encoders H112/2ST Stage with 300 x 300 mm travel range and 2 mm ball screw HE12/2ST As above with encoders H221 Glass Plate (H112 stages) - not suitable for transmitted microscopy H225 Glass plate (H116 stages) - not suitable for transmitted microscopy H227 Glass plate (H105 stages) - not suitable for transmitted microscopy H231 Aluminium plate (H105 stages) H232 Aluminium plate (H116 stages) H233 Aluminium plate (H122 stages) H233B Aluminium plate with M4 and M6 tapped holes (H112 stages) HWC15SNL Wafer chuck for 100 and 150 mm wafers (H105 stages) HWC15VNL Wafer chuck, rotatable with vacuum for 150 mm (H105 stages) HWC20S Wafer chuck for for 150 mm and 200 mm wafers (H116 stages) HWC20V Wafer chuck, rotatable with vacuum for 200 mm wafers (H116 stages) HWC30S Wafer chuck, rotatable, for 300 mm wafers (H112 stages) LDB102OL Brightfield LED illumination (standalone) LDB103OL Brightfield LED illumination (controlled via ProScan) LF100K Laser Autofocus Control Keypad LF210 Laser Autofocus for reflective specimens. Requires LF100K and LF335. LF335 Flange to fit LF210 to MX microscopes PS3H122R/H807 Focus drive and adapter PS3J100 Multifunctional manual joystick for ProScan V31F ProScan controller with three stepper drives for focus and two filter wheels or 3 shutters V31XYZE ProScan controller with XYZ drives and encoder input V31XYZEF ProScan controller with XYZ drives, three filter wheel drives, shutter drives and encoder input NOTE THAT DIFFERENT MX VARIANTS CAN ACCOMMODATE DIFFERENT SIZED STAGES MX50 - H105/N2F AND H116 Series MX50L - H105/N2F AND H116 AND H112 series MX51 - H105/N2F ONLY MX61 - H105/N2F AND H116 AND H122 MX61L - H105/N2F AND H116 AND H

27 NOTES 26 Olympus Automation Guide

28 Stage Codes This guide can be used to quickly identify the exact product code for our stages. Many of our stages can fit to a variety of microscopes and can be configured in various ways. To ensure that the correct stage is manufactured and delivered, it is essential that the correct product code be provided. We highly recommend that you contact a Prior Sales Manager prior to ordering. Please note that this is a guide relevant to commonly used, relatively recent research microscopes. For less common, more specialised, or older microscopes, contact Prior Scientific. H101F FLAT TOP STAGE H101P2F This indicates whether the stage is encoded or not: P: Not currently encoded (upgrade available) E: Encoded This indicates the microscope type the stage is suitable for: F: No microscope specified BX: Olympus (general) B3: Olympus (BX63 microscope w/pillars) This indicates the ballscrew of the stage: 1: 1 mm ballscrew 2: 2 mm ballscrew H138A STAGE H138A 27 This indicates whether the stage is encoded or not: 1: Not currently encoded (upgrade available) E: Encoded

29 Stage Codes H117 STAGE H117E1XD This indicates whether the stage is encoded or not: P: Not currently encoded (upgrade available) E: Encoded For IX81 microscopes, the stage required has a different code! H117E1I4 This indicates whether the stage is encoded or not: P: Not currently encoded (upgrade available) E: Encoded H101A STAGE H101BX This indicates the stepper motor of the stage: 1: 200 stepper motor 4: 400 stepper motor This indicates whether the stage is encoded or not; 1: Not currently encoded (upgrade available) E: Encoded This indicates the ballscrew of the stage: 0: 2 mm ballscrew P: 1 mm ballscrew 28 Olympus Automation Guide

30 Stage Codes H112 STAGE H112/2ST This indicates the pitch ball screw; 2: 2 mm ballscrew pitch 5: 5 mm ballscrew pitch H116 STAGE H116/2OL This indicates whether the stage is encoded or not: 1: Not currently encoded (upgrade available) E: Encoded This indicates whether the stage is encoded or not: 1: Not currently encoded (upgrade available) E: Encoded This indicates the pitch ball screw: 2: 2 mm ballscrew pitch 5: 5 mm ballscrew pitch H105 STAGE FOR UPRIGHT MICROSCOPES H105/N2F There are currently no encoded variants for the H105/N2F. 29

31 Stage Codes Z-DECK ELECTROPHYSIOLOGY STAGE ZDP12MP This indicates which microscope the Z-Deck is adapted to: This indicates what drives the Z deck: P: Stepper Motor (Unencoded) E: Stepper Motor (Encoded) K: Manual control F: Fixed (no movement possible) P: Olympus BX51WI/BX61WI N: Nikon NiE/FN1 L: Leica Z: Zeiss Axio Examiner H139 MULTI-WELL PLATE STAGE H139#1XD This indicates whether the stage is encoded: 1: Not currently encoded (upgrade available) E: 50 nm encoders 30 Olympus Automation Guide

32 More to Prior than meets the eye Since 1919 Prior Scientific has been producing precision equipment for microscopy. With decades of experience, expert staff, a vast range of products and extensive design, manufacture and assembly facilities, Prior Scientific can supply equipment for all manner of microscopy applications. WORLDWIDE DISTRIBUTION Prior Scientific Ltd Cambridge UK Prior Scientific Inc Rockland MA. USA Prior Scientific GmbH Jena Germany Prior Scientific KK Tokyo Japan t: +44 (0) e: uksales@prior.com t: e: info@prior.com t: +49 (0) e: jena@prior.com t: e: info-japan@prior.com 31