Motorized ZDeck Quick Adjust Platform System
|
|
|
- Dominic Tyler
- 5 years ago
- Views:
Transcription
1 For Nikon FN1/Ni, Olympus BX51WI/BX61WI and Zeiss Axio Examiner Microscopes Zero current for electrophysiology applications Large top plate surface for mounting micromanipulators, 6mm holes on 25mm centers Lowers quickly and easily Prior Scientific s ZDeck Quick Adjust Platform enables users to increase their productivity by allowing them to image multiple areas of interest with speed and precision. ZDeck Quick Adjust Platform features: Pneumatic piston towers which make raising and lowering the ZDeck virtually effortless. No tools are required to adjust the height. Change between thin sample and whole animal imaging height in seconds. ProScan III controller and PS3J100 joystick provide ultra fine XY stage control via dual digipots. Towers are compatible with 6mm or ¼-20 vibration isolation tables Easy access for condenser use and removal No tools are required to adjust height A completely integrated XY stage which provides a lower profile with a thinner. cross section allowing for large samples. Oversized top surface for mounting additional micromanipulators and stereotaxic instruments. Fully encoder upgradable. Large sample area for mounting existing, heating, cooling, perfusion and incubation chambers. Compatible with most imaging software. Features: Image multiple areas of interest with speed and precision Lowers quickly & easily to provide access for loading and unloading samples No tools are required to adjust height Changing between thin sample and whole animal imaging can be accomplished in seconds Pneumatic pistons make raising and lowering the unit effortless Provides sub micron repeatability and smooth movement Compatible with 6mm or 1/4-20 vibration isolation tables Pillar spaces allow for Koehler illumination at a range of focus heights Optional encoders for highest precision available Compatible with multi-photon setup configurations
2 For Nikon FN1/Ni Microscopes Outline Drawing and Information NIKON HP1674 INSTALLATION PART KIT HP Mounting adapter (Qty:2) HP Tower spacer pads (Qty:4) HP Pedestal clamps (Qty:8) HP Spacer pads (Qty:4) HP Mounting clamp (Qty:8) MOUNTING HOLES FOR OPTIONAL NANOSCANZ 400 MICRON PIEZO Z STAGE Mounting Adapter : HP1614 Quantity: 2 Pedestal Clamps : HP1263 Tower Spacer Pad : HP1447 Spacer Pads : HP1284 Mounting Clamps : HP1125 Rockland, M USA uksales@prior.com info@prior.com jena@prior.com info-japan@prior.com
3 For Nikon FN1/Ni Microscopes Specifications Adjustable Rise Platform Hardware Kit Quantity ZDeck travel Vibration table compatibility XY travel XY resolution XY Speed Spacers provided ProScan controller power ProScan computer interface ProScan communication protocol 57mm 1/4-20 or 6mm 65mm x 65mm 40 nanometers 15mm/sec Four pillar spacers, four one inch spacers Universal external power supply. Input V, 50/60Hz, Max 1.6A RS232/USB 8 bit word, 1 stop bit, no parity, no handshake 8 1/4x20x1.5 screw 10 1/4x20x1.0 screw 1 3/16 allen wrench 8.75mm thick M5 washer 1 5mm hex wrench 1 3mm allen wrench 10 1/4 standard flat washer 8 M4 x 10 screw 4 M4 x 30 screw 8 M5 x 14 screw ZDN12MN Complete System Part List 10 M6 x 25 screw 8 M6 x 35 screw ZDM1M2 HP1266 HP1674 H31XYZEF PS3J100 H473UP H230 Motorized ZDeck stage Hardware installation kit Nikon installation parts kit ProScan controller ProScan joystick Universal specimen holder Solid aluminum plate Ordering Information ZDN12MN for Nikon FN1/Ni ZDN12ME for Nikon FN1/Ni Prior high precision motorized ZDeck system complete with Prior ZDeck, motorized ProScan XY stage, ProScan III controller, PS3J100 joystick with dual digipot controls, universal holder, solid aluminum plate and pillar spacers. Prior high precision motorized ZDeck system complete with Prior ZDeck, motorized ProScan XY stage with 50 nanometer linear scales, ProScan III controller, PS3J100 joystick with dual digipot controls, universal holder, solid aluminum plate and pillar spacers. Rockland, M USA uksales@prior.com info@prior.com jena@prior.com info-japan@prior.com
4 For Olympus BX51WI/BX61WI Microscopes Outline Drawing and Information OLYMPUS HP1673 INSTALLATION PART KIT HP Adapter spacers (Qty:2) HP Condenser extender (Qty:1) HP Pedestal clamps (Qty:8) HP Spacer pads (Qty:4) MOUNTING HOLES FOR OPTIONAL NANOSCANZ 400 MICRON PIEZO Z STAGE Adapter Spacers : HP1678 Quantity: 2 Condenser Extender : HP1285 Quantity: 1 Pedestal Clamps : HP1263 Spacer Pads : HP1284 Rockland, M USA uksales@prior.com info@prior.com jena@prior.com info-japan@prior.com
5 For Olympus BX51WI/BX61WI Microscopes Specifications Adjustable Rise Platform Hardware Kit Quantity ZDeck travel Vibration table compatibility XY travel XY resolution XY Speed Spacers provided ProScan controller power ProScan computer interface ProScan communication protocol 57mm 1/4-20 or 6mm 65mm x 65mm 40 nanometers 15mm/sec One condenser, four pillar spacers, two adapter spacers Universal external power supply. Input V, 50/60Hz, Max 1.6A RS232/USB 8 bit word, 1 stop bit, no parity, no handshake 8 1/4x20x1.5 screw 10 1/4x20x1.0 screw 1 3/16 allen wrench 8.75mm thick M5 washer 1 5mm hex wrench 1 3mm allen wrench 10 1/4 standard flat washer 8 M4 x 10 screw 4 M4 x 30 screw 8 M5 x 14 screw ZDP12MN Complete System Part List 10 M6 x 25 screw 8 M6 x 35 screw ZDM1M2 HP1266 HP1673 H31XYZEF PS3J100 H473UP H230 Motorized ZDeck stage Hardware installation kit Olympus installation parts kit ProScan controller ProScan joystick Universal specimen holder Solid aluminum plate Ordering Information ZDP12MN for Olympus BX51WI/61WI ZDP12ME for Olympus BX51WI/61WI Prior high precision motorized ZDeck system complete with Prior ZDeck, motorized ProScan XY stage, ProScan III controller, PS3J100 joystick with dual digipot controls, universal holder, solid aluminum plate, condenser spacer and four 10mm pillar spacers. Prior high precision motorized ZDeck system complete with Prior ZDeck, motorized ProScan XY stage with 50 nanometer linear scales, ProScan III controller, PS3J100 joystick with dual digipot controls, universal holder, solid aluminum plate, condenser spacer and four 10mm pillar spacers. Rockland, M USA uksales@prior.com info@prior.com jena@prior.com info-japan@prior.com
6 For Zeiss Axio Examiner Microscopes Outline Drawing and Information ZEISS HP1674 INSTALLATION PART KIT HP Mounting adapter (Qty:2) HP Tower spacer pads (Qty:4) HP Pedestal clamps (Qty:8) HP Spacer pads (Qty:4) HP Mounting clamp (Qty:8) MOUNTING HOLES FOR OPTIONAL NANOSCANZ 400 MICRON PIEZO Z STAGE Mounting Adapter : HP1614 Quantity: 2 Pedestal Clamps : HP1263 Tower Spacer Pad : HP1447 Spacer Pads : HP1284 Mounting Clamps : HP1125 Rockland, M USA uksales@prior.com info@prior.com jena@prior.com info-japan@prior.com
7 For Zeiss Axio Examiner Microscopes Specifications Adjustable Rise Platform Hardware Kit Quantity ZDeck travel Vibration table compatibility XY travel XY resolution XY Speed Spacers provided ProScan controller power ProScan computer interface ProScan communication protocol 57mm 1/4-20 or 6mm 65mm x 65mm 40 nanometers 15mm/sec Four 10mm pillar spacers, four one inch spacers Universal external power supply. Input V, 50/60Hz, Max 1.6A RS232/USB 8 bit word, 1 stop bit, no parity, no handshake 8 1/4x20x1.5 screw 10 1/4x20x1.0 screw 1 3/16 allen wrench 8.75mm thick M5 washer 1 5mm hex wrench 1 3mm allen wrench 10 1/4 standard flat washer 8 M4 x 10 screw 4 M4 x 30 screw 8 M5 x 14 screw ZDZ12MN Complete System Part List 10 M6 x 25 screw 8 M6 x 35 screw ZDM1M2 HP1266 HP1674 H31XYZEF PS3J100 H473UP H230 Motorized ZDeck stage Hardware installation kit Zeiss installation parts kit ProScan controller ProScan joystick Universal specimen holder Solid aluminum plate Ordering Information ZDZ12MN for Zeiss Axio Examiner ZDZ12ME for Zeiss Axio Examiner Prior high precision motorized ZDeck system complete with Prior ZDeck, motorized ProScan XY stage, ProScan III controller, PS3J100 joystick with dual digipot controls, universal holder, solid aluminum plate and pillar spacers. Prior high precision motorized ZDeck system complete with Prior ZDeck, motorized ProScan XY stage with 50 nanometer linear scales, ProScan III controller, PS3J100 joystick with dual digipot controls, universal holder, solid aluminum plate and pillar spacers. Rockland, M USA uksales@prior.com info@prior.com jena@prior.com info-japan@prior.com
More to Prior than meets the eye. Olympus. Automation Guide. 1 Olympus Automation Guide
More to Prior than meets the eye Olympus Automation Guide 1 Olympus Automation Guide www.prior.com Introduction This brochure is designed to provide an overview of the equipment we produce for a range
Sample Holders Specialised Inserts from Prior Scientific
Prior Scientific s vast range of sample holders allow the end user to view almost any sample type, giving great flexibility whilst holding the sample tightly in place, complementing the wide variety of
WHERE VISION MEETS PRECISION. ProScan TM III. High Performance Flexible Microscope Automation Systems. prior.com
WHERE VISION MEETS PRECISION ProScan TM III High Performance Flexible Microscope Automation Systems prior.com ProScan TM III High Performance Flexible Microscope Automation Systems ProScan TM III Universal
High Performance Microscope Automation Systems
T M P r o S c a n I I I High Performance Microscope Automation Systems ProScan TM III Universal Microscope Automation Controller System Control Prior Scientific has designed and manufactured precision
PS3J100 User manual. Proscan III Interactive control Centre. Worldwide distribution. prior.com. web at. Version Issue 1.
PS3J100 User manual Proscan III Interactive control Centre Visit web at Prior on the prior.com Worldwide distribution Prior Scientific, Ltd Prior Scientific, Inc Prior Scientific, GmbH Prior Scientific
SlicePlatform Fixed Platform System
Experts in Electrophysiology & Imaging SlicePlatform Fixed Platform System Rock solid stability Mounting equipment www.scientifica.uk.com/sliceplatform 2 SlicePlatforms for upright microscopes Scientifica
Probe station system
Probe station system Manufacturer: Micromanipulator Mode: 450PM-HR Descriptions: The Model 450PM 8 probe station offers stable and reliable probing performance. It is based on a design of Micromanipulator
Universal Motorised Stage
www.scientifica.uk.com Universal Motorised Stage Universal Motorised Stage UMS Universal Motorised Stage Rapid, precise adjustment makes the Scientifica Universal Motorised Stage (UMS) a valuable tool
ProScan. High Performance Motorized Stage Systems
TM ProScan High Performance Motorized Stage Systems ProScan Advanced Microscope Automation Prior Scientific has been designing and manufacturing precision optical systems, microscopes and related accessories
M-545 XY Microscope Stage with Ultrasonic Linear Drives High Stability, Low Profile, High Speed, Direct Position Measurement
M-545 XY Microscope Stage with Ultrasonic Linear Drives High Stability, Low Profile, High Speed, Direct Position Measurement The M-545.2P microscope stage with closed-loop ultrasonic piezo motors provides
M-545 XY Microscope Stage with Ultrasonic Linear Drives High Stability, Low Profile, High Speed, Direct Position Measurement
M-545 XY Microscope Stage with Ultrasonic Linear Drives High Stability, Low Profile, High Speed, Direct Position Measurement The M-545.2U microscope stage with closed-loop ultrasonic piezo motors provides
Movable Top Plate (MTP)
Experts in Electrophysiology & Imaging Movable Top Plate (MTP) With manual adjusters Mounting equipment www.scientifica.uk.com 2 Movable Top Plate (MTP) This platform satisfies those wishing for manual,
M-545 Manual XY Microscope Stage For Olympus, Nikon, Leica & Zeiss Microscopes / PI Piezo Stages
M-545 Manual XY Microscope Stage For Olympus, Nikon, Leica & Zeiss Microscopes / PI Piezo Stages M-545 manual microscopy stages are designed to accommodate the P-545 PInano series of XY / XYZ Piezo stag
Nikon Focus Drive Manual
Nikon Focus Drive Manual PRIOR SCIENTIFIC INC., 80 RESERVOIR PARK DRIVE, ROCKLAND, MA 02370-1062 TELEPHONE 781-878-8442 FAX 781-878-8736 WWW.PRIOR.COM Table of Contents Safety Information...1 Unpacking
Installing and Using Prior Software
Prior Scientific Help Guides and Installation Instructions Prior Scientific UPDATED Help Guides 17 and APRIL Installation 2015 Instructions UPDATED 18 February 2016 Installing and Using Prior Software
Sample Holders Specialised Inserts from Prior Scientific
Prior Scientific s vast range of sample holders allow the end user to view almost any sample type, giving great flexibility whilst holding the sample tightly in place, complementing the wide variety of
= mppgnmm= = mêçpå~å=fff=fåíéê~åíáîé=`çåíêçä=`éåíêé=
= mppgnmm= = mêçpå~å=fff=fåíéê~åíáîé=`çåíêçä=`éåíêé= j~åì~ä=séêëáçå=nkmp ProScan III - PS3J100 1 q~ääé=çñ=`çåíéåíë= SECTION 1 IMPORTANT SAFETY INFORMATION... 3 1.1 IMPORTANT SAFETY INFORMATION... 3 SECTION
PInano 1x3 XYZ & XY Piezo Stage Systems
New: Large Aperture for Slides, Petri Dishes, Heaters & Specimen Holders PInano 1x3 XYZ & XY Piezo Stage Systems Low-Profile, Low-Cost, Nanopositioning Systems for Super-Resolution Microscopy PInano series
060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
Inverted Movable Top Plate (IMTP)
Experts in Electrophysiology & Imaging Inverted Movable Top Plate (IMTP) Mounting equipment www.scientifica.uk.com/imtp 2 Benefits A central component in any electrophysiology setup, is a good mounting
1551 S. Harris Court,. Anaheim, CA Phone: Fax:
1551 S. Harris Court,. Anaheim, CA 92806 Phone: 714.978.1551... Fax: 714.978.0431 Model 4KE / 4KEH Series: Semi-Automatic, Motorized Y/Z Axes, Wedge-Wedge, Ball- Wedge Triple-Convertible Wire Bonders Last
Go from sit to stand, with one touch
Sit-to-Stand Workstation StarTech ID: ARMSTS This sit-to-stand workstation lets you change your working position throughout the day, to enhance your comfort and productivity. Go from sit to stand, with
Don't keep your cells waiting.
Don't keep your cells waiting. Thumb nuts Magnetic plate Tool Tray Cell chamber Gasket Coverslip Heating insert Stage adapter Assembly View Release two thumb nuts to change coverslips and clean the entire
SliceScope Pro Systems
Experts in Electrophysiology & Imaging Microscopy SliceScope Pro Systems Complete electrophysiology & imaging solutions www.scientifica.uk.com/slicescopepro 2 SliceScope Pro electrophysiology systems These
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
LUMEN 100 Single LED illumination system Manual Version 1.1
LUMEN 100 Single LED illumination system Manual Version 1.1 Worldwide distribution Prior Scientific, Ltd Prior Scientific, Inc Prior Scientific, GmbH Prior Scientific KK Cambridge, UK Rockland, MA. USA
Magnetic probe holders are fully adjustable for more DUT heights and probe styles
Data Sheet The W4.0 x L6.5 mini probe station is a manual probe station designed for a versatile and comfortable operation on up to 4.0 wafers or 4.0 x 6.5 printed circuit board assemblies. This mini probe
PELCO SEM Specimen Holders
PELCO SEM Specimen Holders The Modular Concept Hitachi JEOL FEI/Philips ZEISS/LEO TED PELLA, INC. Microscopy Products for Science and Industry The PELCO modular SEM specimen holder system offers the most
MP-285 MOTORIZED MICROMANIPULATOR
40 MP-285 MOTORIZED MICROMANIPULATOR (Shown with ROE input device) The flagship in our line of precision micromanipulators, the motorized MP-285 is affordable yet offers advanced features found in manipulators
LEEDS. Product Catalog. PRECISION INSTRUMENTS. Microscope accessories, bases, stands, lighting, mounts & tables.
PRECISION INSTRUMENTS Product Catalog Microscope accessories, bases, stands, lighting, mounts & tables December 2018 www.leedsmicro.com T a b l e o f C o n t e n t s Part Number Description Page # STANDS
Diagonal FOV 18.5mm - 2.7mm ( inch); Video Magnification 30x-210x on 22" Monitor.
HD803-BSM22 HD803 3D HD High Definition 1080p Rotational Microscope with Detent Working Distance. Diagonal FOV 18.5mm - 2.7mm (0.72-0.10 inch); Video Magnification 30x-210x on 22" Monitor. HD 1080P 60
Ultra short throw lens installation
Ultra short throw lens installation The ultra short throw lens 0.36 UST GS (P/N: 140-133108-XX) allows you to position your projector as close as possible to your screen or display. Unless otherwise indicated,
Sit-to-Stand Workstation
Sit-to-Stand Workstation Product ID: ARMSTS This sit-to-stand workstation lets you change your working position throughout the day, to enhance your comfort and productivity. Go from sit to stand, with
Linear Positioning Stage Reference Manual
PP-30 Series Linear Positioning Stage PP-30 Piezo Positioner Stage Rev 3.00 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538 Email: info@micronixusa.com
Desk-Mount Dual Monitor Arm - Full Motion - Articulating
Desk-Mount Dual Monitor Arm - Full Motion - Articulating Product ID: ARMSLIMDUO Enhance productivity and free up valuable space with the ARMSLIMDUO Dual-Monitor Arm. Two independent arms make it easy to
Quick Installation Guide
Full Motion Dual Monitor Arm, Pole Mount Quick Installation Guide Please Review the entire Quick Installation Guide prior to installation. If you have any questions regarding the compatibility of this
Linkam Scientific Instruments
MDS600 - Motorized XY Heating/Freezing System The MDS600 System is the top of the range solution for unrivalled temperature accuracy and motorized sample control. Features and Benefits The MDS600 is a
Assembly Manual for Mobile X-ray
Suitable for Kodak 2000, Kodak 2100, Kodak 2200 and Trophy Elytis - 12 th January 2011 William Green Page 1 of 8 Printed 12/01/2011, 2:07:42 PM Mobile X-ray Parts List 1. 6 x M10 x 65mm UNB CAP Bolts 2.
UHP-M Ultra-High Power UV-Visible LED Light Source Fluorescence Microscopy Ver. 07
Introduction UHP-M Ultra-High Power UV-Visible LED Light Source Fluorescence Microscopy Ver. 07 Prizmatix UHP-M Dual-LED light engine is designed to substitute the Metal-Halide and Mercury lamps in routine
From Eye to Insight. Live On Stage. Live Cell Microscopy Environmental Equipment for Leica Inverted and Upright Microscopes June 2018
From Eye to Insight Live On Stage Live Cell Microscopy Environmental Equipment for Leica Inverted and Upright Microscopes June 2018 A Stages Stages without Temperature Control (A1-A11)... 3 Stages with
DeltaPix Modus M12Z Digital microscope
DeltaPix Modus M12Z Digital microscope DeltaPix Modus 12Z Compact Full This innovative fully motorized and automated digital microscope offers quality and features never seen before at this price level.
Quick Installation Guide
Full Motion Dual Monitor Arm, Pole Mount Quick Installation Guide Please Review the entire Quick Installation Guide prior to installation. If you have any questions regarding the compatibility of this
ISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT
ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK
Optical Kit Encoder Page 1 of 7. Description. Features
Description Page 1 of 7 The E2 optical encoder is designed as a direct replacement for the Avago HEDS / HEDM 5500-5600 series. The E2 is a rotary encoder with a rugged glass-filled polymer enclosure, which
OptiScan III. Motorised Stage Systems Manual Version 1.3. Worldwide distribution. Prior Scientific Instruments Ltd., UK Version 1.
OptiScan III Motorised Stage Systems Manual Version 1.3 Worldwide distribution Prior Scientific, Ltd Prior Scientific, Inc Prior Scientific, GmbH Prior Scientific KK Cambridge, UK Rockland, MA. USA Jena,
PL200. Automatic Slide loader Manual Version 3.3
PL200 Automatic Slide loader Manual Version 3.3 Prior Scientific, Ltd Prior Scientific, Inc Prior Scientific, GmbH Prior Scientific, KK Cambridge, UK Rockland, MA. USA Jena, Germany Tokyo, Japan T. +44
RAMM Microscope Configuration Guide
RAMM Microscope Configuration Guide ASI s RAMM frame microscopes are modular open frame alternative to conventional commercial microscopes. Using a RAMM frame may be especially appropriate for instruments
MPI TS150-THZ 150 mm Manual Probe System
MPI TS150-THZ 150 mm Manual Probe System Industry s first explicitly designed probe system for accurate measurements at mm-wave and sub-mm wave (THz) frequency range FEATURES / BENEFITS Variety of Applications
200 mm Semi-automated Probe System with BlueRay Technology
PA200BlueRay 200 mm Semi-automated Probe System with BlueRay Technology DATA SHEET The sets a new standard for high-speed accuracy. Its precision ensures smooth probe landing with safe, repeatable electrical
Microscopic Imaging Research Station (MIRS) Assembly Guide. Version 1.0.0
Microscopic Imaging Research Station (MIRS) Assembly Guide www.adsyscontrols.com Adsys Controls, Inc.2012 Version 1.0.0 I. Assembly of the Adsys Controls MIRS system This document explains the assembly
3D SYSTEMS University CubeX 3D Printer
3D SYSTEMS University CubeX 3D Printer Lesson Leveling the Print Pad and Print Tips, Setting the Z-Gap Revision date: 10/22/13 1 1 2016 年 6 月 14 日 Objectives After completing this lesson you will: Be able
Optical Kit Encoder Page 1 of 11. Description. Features
Description Page 1 of 11 The E6 Series rotary encoder has a molded polycarbonate which utilizes either a 5-pin or 10-pin latching connector. This optical incremental encoder is designed to easily mount
Motorized Rotary Stage Installation of Motorized Stage...4 Connection of power cables...4 Installation of the Motor Mount Unit...
Motorized Rotary Stage 4360 Contents Introduction...2 Control Unit...3 Installation...4 Installation of Motorized Stage...4 Connection of power cables...4 Installation of the Motor Mount Unit...4 Operation...5
Stepper Systems. Chapter Four. Features Machine Specifications And Bid Proposals. Catalog Numbers
Stepper Systems Features Machine Specifications And Bid Proposals Chapter Four Stepper 11x13: Stepper 21x19: Stepper 21x29: Stepper 21x39: Stepper 31x33: Stepper 49x41: Catalog Numbers HX33SBME01201505
Quick Installation Guide
Full Motion Single Monitor Arm, Pole Mount Quick Installation Guide Please Review the entire Quick Installation Guide prior to installation. If you have any questions regarding the compatibility of this
DeltaPix Modus 12Z Digital microscope
DeltaPix Modus 12Z Digital microscope DeltaPix Modus 12Z Compact Full Motorized Digital Microscope This innovative fully motorized and automated digital microscope offers quality and features never seen
MPI TS150-AIT 150 mm Manual Probe System
MPI TS150-AIT 150 mm Manual Probe System Industry s first explicitly designed 150 mm probe system providing accurate tests for mm-wave, THz, and automated impedance tuner applications FEATURES / BENEFITS
TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
Create a more ergonomic dual-monitor setup
Dual Monitor Mount with Built-in 2-port USB and Audio Pass-Through StarTech ID: ARMSLIMDUO Enhance productivity and free up valuable space with the ARMSLIMDUO dual-monitor mount. Two independent arms make
HDAF800 HD 1080p Digital Microscope USB drive for Image Capture
HDAF800 HD 1080p Digital Microscope USB drive for Image Capture HDAF800-US Auto-Focus HD Camera System 1080p including Universal Stand with 15" Vertical Pole and integrated LED lighting and controls panels.
Triple-Monitor Arm. Greater comfort and productivity Product ID: ARMTRIO
Triple-Monitor Arm Product ID: ARMTRIO Create the ultimate ergonomic comfort while freeing up valuable desk space with this triple-monitor arm. You can set up three computer monitors (each up to 24 ) and
Precision Piezo Stage Reference Manual (Open and Closed Loop Versions)
PPX-32 Series Precision Piezo Stage (Open and Closed Loop Versions) PPX-32 Piezo Positioner Stage Rev 3.02 MICRONIX USA, LLC 15375 Barranca Parkway, E-106 Irvine, CA 92618 Tel: 949-480-0538 Fax: 949-480-0538
M50 and M50RT Series. Brightfield / Darkfield Metallurgical Microscopes
M50 and M50RT Series Brightfield / Darkfield Metallurgical Microscopes M50 / M50RT Brightfield / Darkfiefld Metallurgical Microscope Features Semi APO BF MET Infinity Corrected Objectives Part # Objective
Optical Kit Encoder Page 1 of 9. Description. Features
Description Page 1 of 9 The E5 Series rotary encoder has a rugged glass-filled polymer enclosure with either a 5-pin or 10-pin latching connector. This optical incremental encoder is designed to easily
THMS350V Vacuum System
THMS350V Vacuum System S c i e n t i f i c I n s t r u m e n t s The THMS350V stage enables the user to create low pressure environment during complex heating and cooling profiles. Pressure is measured
XSLIDE. XSlide Positioning System. Manual and Motorized. Compact Positioning Stage. Long life, precise movement, greater value
XSlide Positioning System Long life, precise movement, greater value Manual and Motorized Compact Positioning Stage XSLIDE Ideal for limited space applications Velmex Versatility Velmex positioning products
UHP-M Ultra-High Power UV-Visible LED Light Source Fluorescence Microscopy Ver. 04
Introduction UHP-M Ultra-High Power UV-Visible LED Light Source Fluorescence Microscopy Ver. 04 Prizmatix UHP-M Dual-LED light engine is designed to substitute the Metal-Halide and Mercury lamps in routine
GCX Mounting Assembly Installation Guide. Pedestal Mount for Philips IntelliVue MP5/20/30/40/50/60/70, MX400/450/500/550/600/700/800
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com GCX Mounting Assembly Installation Guide Pedestal Mount for Philips IntelliVue MP5/20/30/40/50/60/70, MX400/450/500/550/600/700/800
Fully Automatic Screen Printer H450(ON-LINE SYSTEM)
Fully Automatic Screen Printer Flexible Auto Clamp system. Very stable machined cast structure. Auto conveyor width adjustment. Adjustable width/thickness for stencil frames. User friendly, Windows 7 OS,
Optical Kit Encoder Page 1 of 14. Description. Features
Page 1 of 14 Description The E5 Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin finger-latching connector. This optical incremental encoder is designed to easily
PLW20 Well Plate Loader Version 2.2
PLW20 Well Plate Loader Version 2.2 Worldwide distribution Prior Scientific, Ltd Prior Scientific, Inc Prior Scientific GmbH Prior Scientific KK Cambridge, UK Rockland, MA. USA Jena, Germany Tokyo, Japan
Encoded Device User s Manual
An Oregon Corporation MC000e-R MC000e-R/T MC000e- MC000e MC000e-J Mc00e DR000 RPA Motorized Translation Stages Motorized XYZ Stages 80 Series Actuators Motorized Rotational Stages 00 by Siskiyou Corporation
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 Rev A 3/17 Model CLIMB2-SLV ASSEMBLY AND ADJUSTMENT CLIMB2 PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
EVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
Release Notes ZEN 2.3 SP1
Release Notes ZEN 2.3 SP1 Carl Zeiss Microscopy GmbH Carl-Zeiss-Promenade 10 07745 Jena, Germany microscopy@zeiss.com www.zeiss.com/microscopy Carl Zeiss Microscopy GmbH Königsallee 9-21 37081 Göttingen
Test Cell Co-planarity Optimization Presenter: Troy Harnisch
Test Cell Co-planarity Optimization Presenter: Troy Harnisch Teradyne Co-authors: Doug Garrett, NXP Hoang Nguyen, Microsemi What is co-planarity of a test cell Parallel plane between wafer chuck and probe
Ideal for a wide range of applications such as wafer test or PCB test for mm-wave, Microwave, RF or Automotive applications
Data Sheet The W2.5 x L6.5 mini probe station is a manual probe station designed for a versatile and comfortable operation on up to 2.5 wafers or 2.5 x 6.5 printed circuit board assemblies. This mini probe
Switching Power Supply
Switching Power Supply Miniature, Thin Power Supply to Be Built into Equipment Half the size of OMRON s conventional power supply. PCB-type and connector-type models available. UL, CSA approved. Conforming
7409 K570. Generic Pinpad Mount. Kit Instructions. Issue B
7409 K570 Generic Pinpad Mount Kit Instructions Issue B Revision Record Issue Date Remarks A Jun 2009 First issue B Mar 2011 Added 7409 K060 support 1 Introduction This kit provides an arm that is used
STEREO MICROSCOPE BOOM STANDS
For your general digital camera needs, request our SPOT Insight Brochure. For your low light digital camera needs, request our SPOT RT Brochure. For your substage illuminator needs, request our Transilluminating
Digital Measurement Metrology, Inc. Bulletin No Digital Measurement Metrology, Inc PRECISION IS OUR VISION
Bulletin No. 2021 Profile Projectors A series of midsize profile projectors featuring bright, 12.40" (315mm) diameter screens and easy-to-operate XY measurement tables. Easy-to-read digital counters are
Articulating TV/Monitor Clamp/Grommet Desk Mount Model: DE640S (Hydro Series)
Articulating TV/Monitor Clamp/Grommet Desk Mount Model: DE640S (Hydro Series) Instruction Manual Images may be different from actual product Disclaimer It is Dyconn s intention to have all the correct
Sit-Stand Monitor Arm
Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment
MPI TS150-HP 150 mm High Power Manual Probe System For accurate High Power measurements up to 10 kv, 600 A
MPI TS15-HP 15 mm High Power Manual Probe System For accurate High Power measurements up to 1 kv, 6 A FEATURES / BENEFITS Universal Use Designed specifically for high power device measurement and wide
Flip-Chip-Aligner-Bonder Model M-8HP
Flip-Chip-Aligner-Bonder Model M-8HP 1. Introduction DO NOT CHANGE THE SETTINGS OF THE VIDEO CAMERAS UNLESS YOU ARE AUTHORIZED TO CALIBRATE THE MACHINE AND KNOW WHAT YOU ARE DOING! The laminar flow hood
Profile Projectors. Microscopes
I Optical Measuring Profile Projectors Microscopes MF-UB3017D INDEX Profile Projectors PJ-A3000 Series 302-Vertical I-2,3 PJ-H30 Series 303-High Accuracy I-4,5 PV-5110 Series 304 I-6,7 PH-A14 Series 172
HFS600 Heating and Freezing Stage
HFS600 Heating and Freezing Stage The HFS600 stage is based on the design of the THMS600, one of the most widely used heating and freezing stages on the market. Using the highly polished, pure silver heating
SMART HEATSINKS UNIVERSAL MOUNTABLE, AUTO-ALIGN HEAT SINKS
SMART HEATSINKS UNIVERSAL MOUNTABLE, AUTO-ALIGN HEAT SINKS Smart Heatsinks, Inc. introduces an innovation in SMT or THMT heat sinks to meet the needs of newer higher power semiconductors. The heat sinks
User Manual. Binocular Zoom Stereo Microscope with Boom Stand. MicroscopeNet.com
User Manual Binocular Stereo Microscope with Boom Stand Model W42C1 Series MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 1 1. Component Illustration... 2 2. Installation...3
This Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount.
This Datasheet for the IC697CHS790 Rack, 9 Slots, Rear Mount. http://www.cimtecautomation.com/parts/p-14771-ic697chs790.aspx Provides the wiring diagrams and installation guidelines for this GE Series
SNOWBOARD RACK KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 25
SNOWBOARD RACK KIT P/N 2881251 APPLICATION Pro Ride RMK 155 and 163, Axys RMK 155, 163, and 174 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
Micro Hardness Testing Machines. Rockwell Hardness Testing Machines. Micro Zone Test System. Portable Hardness Testing Instruments
K Test Equipment Micro Hardness Testing Machines Rockwell Hardness Testing Machines Micro Zone Test System Portable Hardness Testing Instruments INDEX Test Equipment Micro Hardness Testing Machines Lineup
PatchStar Micromanipulator. Control. Productivity through control
Experts in Electrophysiology PatchStar Micromanipulator Control Productivity through control PatchStar The PatchStar motorised micromanipulator was developed in collaboration with our electrophysiology
Artisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment
Looking for more information? Visit us on the web at http://www.artisan-scientific.com for more information: Price Quotations Drivers Technical Specifications. Manuals and Documentation Artisan Scientific
CERNA COMPONENTS: TRANS-ILLUMINATION
CERNA COMPONENTS: TRANS-ILLUMINATION Observe Thin In Vitro Samples with Transmitted Light s and LEDs Provide Bright Trans-Illumination Brightfield, DIC, and Dodt Contrast are Fully Supported Cerna Microscope
Desk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust
Desk Mount Articulating Dual Monitor Arm with Cable Management & Height Adjust ARMDUAL *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com
Product Overview Life Sciences & Industrial Division
Product Overview Life Sciences & Industrial Division IN CONTROL To meet the demand for instrumentation critical to life science research, we offer a unique line of piezoelectric-based positioning systems
PFPDARM3 Product Illustration
PFPDARM3 Product Illustration page 1 of 15 PFPDARM3 Components & Fasteners 1x 1x 4x 4x 8x 4x 1 each TOOLS REQUIRED Phillips Screwdriver 1/2" Wrench 1/2" Socket Wrench 3/32" (2.38mm) 3/16" (4.76mm) 1/8"
AVT Model Tripod.
AVT Model Tripod www.ravelliphoto.com Product Overview: The Ravelli AVT professional tripod is a high performance, fluid drag tripod that provides smooth continuous drag control and operates on both pan
Nikon T1-E microscope with A1 confocal and STORM super-resolution Zeiss LSM510/Meta confocal microscope.
Nikon T1-E microscope with A1 confocal and STORM super-resolution. This system allows for the imaging of cells and tissues labeled with fluorescent probes using live or fixed specimens to obtain 3D images