MODULE PC. EXPANSION PRO SET MODULE

Transcription

1 PRO TOOL SETS 197 P. EXPNSION PRO SET UY WHT YOU NEED 84 sockets 42 wrenches 7 drive tools 16 ratcheting wrenches 9 screwdrivers 4 pliers 35 additional tools 2 MODULE P. EXPNSION PRO SET MODULE /4 Inch Drive Sockets MEHNI S PRO TOOL SETS Twelve-Point Standard Sockets /16" /32" /32" /8" /4" /16" /32" /2" /16" /16" 10 Twelve-Point Standard Deep Sockets /16" /32" /32" /8" /4" /16" /32" /2" /16" /16" 5 Hex it Standard Sockets /16" /16" /32" /8" /4" 4 Screwdriver it Sockets /32" Screwdriver it Socket /4" Screwdriver it Socket P-1 Phillips it Socket P-2 Phillips it Socket 1/4 Inch Drive Tools Full Polish Ratchet " Extension ar " Speeder ar 3/8 Inch Drive Sockets 13 Six-Point Standard Sockets /4" /16" /8" /16" /2" /16" /8" 17 Six-Point Metric Sockets mm mm mm mm mm mm mm mm mm 6 Standard Hex it Sockets /32" /16" /32" /16" 3/4" 13/16" 7/8" 15/16" 1" 15mm 16mm 17mm 18mm 19mm 20mm 21mm 22mm 1/4" 5/16" 3/8" 6 Metric Hex it Sockets mm mm mm mm mm mm 2 Screwdriver it Sockets /32" Screwdriver it Socket /32" Screwdriver it Socket 2 Spark Plug Sockets /4" Spark Plug Socket mm Spark Plug Socket 1/2 Inch Drive Sockets 2 Standard Hex it Sockets /16" /8" 7 Metric Hex it Sockets /32" Screwdriver it Socket /32" Screwdriver it Socket /8" Screwdriver it Socket #1 Phillips it Socket #2 Phillips it Socket #3 Phillips it Socket #4 Phillips it Socket 3/8 Inch Drive Tools Full Polish Ratchet " Flex T-Handle RFTSMN INDUSTRIL 3000 SERIES 11-DRWER TOOL STORGE OMO MODULE 1/2 Inch Drive Tools Full Polish Ratchet /4" dapter Wrenches 14 Six-Point Standard ombination Wrenches /4" /8" /16" /16" /32" /4" /8" /16" /16" /8" /2" /16" /16" " 14 Six-Point Metric ombination Wrenches mm mm mm mm mm mm mm mm mm mm mm mm mm mm 8 Standard Full-Polish Ratcheting Wrenches /16" /16" /8" /8" /16" /16" /2" /4" 8 Metric Full-Polish Ratcheting Wrench mm mm mm mm mm mm mm mm 4 Standard Open End Wrenches /32" x 11/16" /32" x 13/16" & SOLD SEPRTELY ON PGE /16" x 13/16" /16" x 1" 5 Metric Open End Wrenches x 19mm x 22mm x 23mm x 24mm x 26mm 3 Standard Short ox End Wrenches /8" x 7/16" /2" x 9/16" /8" x 3/4" 2 djustable Wrenches " " dditional Tools pc. Socket Racks (Std & metric) pc. Socket Racks (Std & metric) pc. Socket Racks (Std & metric) Protective Goggles 5 Folding Hex Key Sets Pc. Inch Pc. Metric Pc. Tamper Torx Pc. all End Inch Pc. all End Metric 3 Phillips Screwdrivers #0 x 2-1/2" Phillips #2 x 1-1/2" Stubby Phillips #4 Phillips 6 Slotted Screwdrivers /8" x 2" Slotted /16" x 6" Slotted /4" x 1-1/2" Stubby Slotted /4" x 8" Slotted /16" x 8" Slotted /32" x 1-1/2" Mini Slotted 4 Pliers /4" Slip Joint " rc Joint " Long Needle Nose " Diagonal utting Pliers 3 Hammers oz. Plastic Tip oz. Rubber Mallet oz. all Pein 27 Punches and hisels Round 1/16" Pin Punch Round 3/32" Pin Punch Round 5/32" Pin Punch Round 1/4" Pin Punch Round 5/32" Line Up Punch Round 3/16" Line Up Punch Round 1/4" x 5/8" x 12 Line Up Punch arton Pointed 3/8" Prick Punch Pointed 1/2" enter Punch Pointed 1/16" Nail Set Punch Pointed 1/32" Nail Set Punch 7/8" hisel 3/4" hisel 3/8" hisel 1/4" hisel 5 pc. Punch and hisel Set Set Wt. lbs

2 PRO TOOL SETS 90 P. ESS EXPNSION PRO SET SOKETS ND WRENHES 50 wrenches 16 pliers 24 additional tools 6 MODULE MEHNI S PRO TOOL SETS 2 Micro licker Torque Wrenches /8" Torque Wrench /2" Torque Wrench 11 Standard Full Polish Stubby ombination Wrenches /8" 7/16" 1/2" 9/16" 5/8" 11/16" Metric Full Polish Stubby ombination Wrenches mm mm mm mm 6 MODULE 48 3/4" 13/16" 7/8" 15/16" 1" MODULE 6 90 P. ESS EXPNSION PRO SET mm mm mm mm mm mm mm 5 Standard Full Polish Flare Nut Wrenches /4 x 5/16" /8 x 7/16" /2 x 9/16" /8 x 11/16" /4 x 7/8" 5 Metric Full Polish Flare Nut Wrenches x 11mm x 12mm x 14mm x 17mm x 18mm 5 Standard Full Polish Deep Offset Wrenches /8 x 7/16" /2 x 9/16" /8 x 11/16" /4 x 7/8" /16 x 15/16" 7 Metric Full Polish Deep Offset Wrenches x 11mm x 14mm x 15mm x 18mm x 19mm x 22mm x 23mm 4 lack Finish djustable Wrenches " " " " 11 T-Thru Torx Drivers T T T T T T T T T T T Pliers " Heavy-Duty Wide Jaw Diagonal utting Pliers " Linesman Pliers 8" Long Nose Pliers 6" ent Long Nose Pliers 6" Diagonal utting Pliers 7" Diagonal utting Pliers 6" Pro Long Nose Locking Pliers 5" Pro urve Jaw Locking Pliers 7" Pro urve Jaw Locking Pliers 10" Pro urve Jaw Locking Pliers Pro Wire Stripper Pliers dditional Tools Pc. Screw Out Damaged Screw Remover Pc. Low Profile olt Out Regular Dual Romex able Up-Front Stripper/utter Pc. Up-Front Mini Wire utter, Stripper, rimper Set arton Set Wt. lbs " Linesman Pliers RFTSMN INDUSTRIL 5000 SERIES 52" WIDE 23-DRWER TOOL STORGE OMO & SOLD SEPRTELY ON PGES

3 SETS 540 P. MEHNI S TOOL SET 540 P. MEHNI S TOOL SET P. MEHNI S TOOL SET /8" dapter mm mm 21 Twelve-Point Metric Sockets 312 SOKETS " Spinner Handle mm mm mm 27 DRIVE TOOLS " Flex T-Handle 6 Standard Hex it Sockets mm mm 121 WRENHES 3/8 Inch Drive Sockets /32" /4" mm mm 13 Six-Point Standard Sockets /16" /16" mm mm 24 SREWDRIVERS /4" /16" /32" /8" mm mm 2 PLIERS /16" /4" 6 Metric Hex it Sockets mm mm 54 DDITIONL TOOLS /8" /16" mm mm mm mm /16" /8" mm mm mm mm 1/4 Inch Drive Sockets /2" /16" mm mm mm mm 11 Six-Point Standard Sockets /16" " 7 Screwdriver & Phillips it Sockets mm mm /32" /32" /8" /32" Screwdriver mm /16" /8" 17 Six-Point Metric Sockets /32" Screwdriver 6 Six-Point Standard Deep Sockets /32" /16" mm mm /8" Screwdriver /16" /8" /4" /2" mm mm #1 Phillips /4" /16" /32" /16" mm mm #2 Phillips /16" " /16" mm mm #3 Phillips 11 Twelve-Point Standard Deep Sockets 12 Six-Point Metric Sockets mm mm #4 Phillips /2" /8" mm mm mm mm 4 Torx it Sockets /16" /16" mm mm mm mm T T /8" " mm mm mm mm T T /16" /16" mm mm mm 4 Spark Plug Sockets /4" /8" mm mm 5 Eight-Point Standard Sockets /8" Spark Plug Socket /16" mm mm /4" /16" /16" Spark Plug Socket 12 Twelve-Point Metric Deep Sockets 10 Twelve-Point Standard Sockets /16" /2" /4" Spark Plug Socket mm mm /16" /32" /8" mm Spark Plug Socket mm mm /32" /8" 13 Twelve-Point Standard Sockets 3/8 Inch Drive Tools mm mm /4" /16" /4" /16" Quick-Release Ratchet Long mm mm /32" /2" /16" /4" /8" Quick-Release Ratchet Flex mm mm /16" /16" /8" /16" /2" Extension ar mm mm 10 Six-Point Standard Deep Sockets /16" /8" " Extension ar 2 Spark Plug Sockets /16" /32" /2" /16" " Extension ar /8" Spark Plug Socket /32" /8" /16" " " Extension ar /16" Spark Plug Socket /4" /16" /8" Universal Joint 1/2 Inch Drive Tools /32" /2" 13 Twelve-Point Metric Sockets /4" dapter Quick-Release Ratchet /16" /16" mm mm /2" dapter " Extension ar 11 Six-Point Metric Deep Sockets mm mm " Flex T-Handle " Extension ar mm mm mm mm 1/2 Inch Drive Sockets " Extension ar mm mm mm mm 15 Six-Point Standard Sockets Universal Joint mm mm mm mm /8" /8" /8" dapter mm mm mm mm /16" /16" " Flex T-Handle mm mm mm /2" " Wrenches mm 11 Six-Point Standard Deep Sockets /16" /16" 15 Standard ombination Wrenches 10 Twelve-Point Standard Deep Sockets /8" /4" /8" /8" /4" /16" /16" /32" /16" /16" /16" /16" /16" /4" /32" /8" /2" /8" /4" /4" /32" /16" /4" /16" /16" /16" /16" /8" /8" /32" /2" /8" " 14 Six-Point Metric Sockets /16" /16" /16" /16" /16" mm mm /2" " 5 Standard Hex it Sockets 11 Six-Point Metric Deep Sockets mm mm /16" /8" /16" /16" mm mm mm mm /8" /32" /8" mm mm mm mm 21 Metric ombination Wrenches /4" mm mm mm mm mm mm 4 Screwdriver & Phillips it Sockets mm mm mm mm mm mm /32" Screwdriver mm mm mm mm mm mm /4" Screwdriver mm 6 Eight-Point Standard Sockets mm mm P-1 Phillips 11 Twelve-Point Standard Deep Sockets /16" /8" mm mm P-2 Phillips /8" /4" /2" /16" mm mm 3 Torx it Sockets /16" /16" /16" /4" mm mm T T /2" /8" 15 Twelve-Point Standard Sockets mm mm T /16" /16" /8" /8" mm mm 1/4 Inch Drive Tools /8" " /16" /16" mm mm Quick-Release Ratchet /16" /2" " mm /2" Extension ar 13 Twelve-Point Metric Deep Sockets /16" /16" 8 Standard Reverse Ratcheting Wrenches " Extension ar mm mm /8" /8" /16" /16" " Extension ar mm mm /16" /16" /8" /8" " Extension ar mm mm /4" /4" /16" /16" /2" Extension Socket mm mm /16" /2" /4" Universal Joint mm mm

4 207 P. DUL-MRK MEHNI S TOOL SET SOKETS 26 WRENHES 7 DRIVE TOOLS 2 SREWDRIVERS 8 DDITIONL TOOLS 1/4 Inch Drive Sockets 11 Six-Point Standard Dual-Mark Sockets /32" /32" /16" /8" /32" /16" /4" /2" /32" /16" /16" 12 Six-Point Metric Dual-Mark Sockets mm mm mm mm mm mm mm mm mm mm mm mm 10 Six-Point Standard Dual-Mark Deep Sockets /16" 7/32" 1/4" 9/32" 5/16" /32" 3/8" 7/16" 1/2" 9/16" 11 Six-Point Metric Dual-Mark Deep Sockets mm 5mm 6mm 7mm 8mm 9mm /4 Inch Drive Tools Quick-Release Ratchet " Extension ar 10mm 11mm 12mm 13mm 14mm 3/8 Inch Drive Sockets 1/2 Inch Drive Sockets 13 Six-Point Standard Dual-Mark Sockets /4" /16" /16" /4" /8" /16" /16" /8" /2" /16" /16" " /8" 17 Six-Point Metric Dual-Mark Sockets mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 14 Six-Point Standard Dual-Mark Sockets /8" /16" /16" /8" /2" /16" /16" " /8" /16" /16" /8" /4" /4" 14 Six-Point Metric Dual-Mark Sockets mm mm mm mm mm mm mm mm mm mm mm mm mm mm 9 Six-Point Standard Dual-Mark Deep Sockets /2" /16" /16" /8" /8" /16" /16" " /4" 9 Six-Point Metric Dual-Mark Deep Sockets mm mm mm mm mm mm mm mm mm 9 Six-Point Standard Dual-Mark Deep Sockets /8" 7/16" 1/2" 9/16" 5/8" Six-Point Metric Dual-Mark Deep Sockets 11/16" 3/4" 13/16" 7/8" mm mm mm mm 7 Six-Point Standard Dual-Mark Impact Sockets mm mm mm mm /2" mm mm /16" mm /8" /16" 2 Dual-Mark Spark Plug Sockets /8" Dual-Mark Spark Plug Socket 7 Six-Point Metric Dual-Mark /16" Dual-Mark Spark Plug Socket Impact Sockets mm /8 Inch Drive Tools Quick-Release Ratchet mm " Extension ar mm " Extension ar mm 3/4" 13/16" 15/16" 19mm 21mm 22mm 4 Six-Point Standard Dual-Mark Deep Impact Sockets /2" /16" /8" /16" 4 Six-Point Metric Dual-Mark Deep Impact Sockets mm mm mm mm 1/2 Inch Drive Tools Quick-Release Ratchet " Extension ar Wrenches 12 Six-Point Standard ombination Wrenches /4" /16" /16" /8" /32" /16" /8" /4" /16" / /2" /8" 14 Six-Point Metric ombination Wrenches mm mm mm mm mm mm mm mm mm mm mm mm mm mm dditional Tools 4 Standard Nut Drivers /4" /16" /8" /16" 4 Metric Nut Drivers mm mm mm mm 2 Screwdrivers #2 x 4" Phillips /16 x 4" Slotted arton 207 P. MEHNI S TOOL SET 207 P. MEHNI S TOOL SET Set Wt. lbs RFTSMN INDUSTRIL 5000 SERIES TOOL STORGE & SOLD SEPRTELY ON PGE 19 FRTIONL/STNDRD/INH RFTSMN UILT FOR THE TOUGHEST JOS 6 POINT 8 POINT 12 POINTU METRI UNIVERSL 97

5 TOOL SETS 188 P. MEHNI S TOOL SET 188 P. MEHNI S TOOL SET 188 P. MEHNI S TOOL SET - LL STNDRD SOKETS WRENHES DRIVE TOOLS SREWDRIVERS DDITIONL TOOLS 1/4 Inch Drive Sockets 11 Six-Point Standard Sockets /32" /32" /16" /8" /32" /16" /4" /2" /32" /16" /16" 10 Twelve-Point Standard Sockets /16" /32" /32" /8" /4" /16" /32" /2" /16" /16" 10 Six-Point Standard Deep Sockets /16" /32" /32" /8" /4" /16" /32" /2" /16" /16" 1/4 Inch Drive Tools Quick-Release Ratchet 3" Extension ar 6" Extension ar 6" Spinner Handle 3/8 Inch Drive Sockets 13 Six-Point Standard Sockets /4" /16" /16" /4" /8" /16" /16" /8" /2" /16" /16" " /8" 5 Eight-Point Standard Sockets /4" /16" /16" /2" /8" 13 Twelve-Point Standard Sockets /4" /16" /16" /4" /8" /16" /16" /8" /2" /16" /16" " /8" 11 Six-Point Standard Deep Sockets /8" /4" /16" /16" /2" /8" /16" /16" /8" " /16" 11 Twelve-Point Standard Deep Sockets /8" /2" /16" /16" 98 RFTSMN INDUSTRIL 5000 SERIES TOOL STORGE SOLD SEPRTELY ON PGE /8" /8" 11/16" /16" 3/4" " 13/16" 3/8 Inch Drive Tools Quick-Release Ratchet " Extension ar " Extension ar 1/2 Inch Drive Sockets 14 Six-Point Standard Sockets /8" /16" /2" /16" /8" /16" /4" Eight-Point Standard Sockets /16" /2" /16" /16" 7/8" 15/16" 1" 1-1/16" 1-3/16" 1-1/4" 5/8" 11/16" 3/4" 9 Twelve-Point Standard Sockets /16" /4" /2" /16" /16" /8" /8" /16" /16" 8 Twelve-Point Standard Deep Sockets /2" /4" /16" /16" /8" /8" /16" /16" 1/2 Inch Drive Tools Quick-Release Ratchet " Extension ar " Extension ar Wrenches 14 Standard ombination Wrenches /4" /16" /16" /2" /32" /16" /8" /8" /16" /8" /4" /16" /16" " 1 ombination Ignition Wrench Set Pc. Standard dditional Tools 7 Standard T-Handle Nut Drivers /16" /8" /4" /16" /16" /2" /32" 1 Hex Key Set Pc. Standard 6 Phillips and Slotted Screwdrivers #0 x 1-1/2" Mini Phillips #1 x 3" Phillips #3 x 6" Phillips /8 x 2" Slotted /16 x 4" Slotted /16 x 6" Slotted arton Set Wt. lbs

6 MIXED DRIVE SOKET SETS 299 P. ULTIMTE DUL-MRK SOKET SET /4 Inch Drive Sockets 11 Six-Point Standard Dual-Mark Sockets /32" /32" /16" /8" /32" /16" /4" /2" /32" /16" /16" 12 Six-Point Metric Dual-Mark Sockets mm mm mm mm mm mm mm mm mm mm mm mm 10 Twelve-Point Standard Dual-Mark Sockets /16" /32" /32" /8" /4" /16" /32" /2" /16" /16" 10 Six-Point Standard Dual-Mark Deep Sockets /16" /32" 13 Twelve-Point Standard Dual-Mark Sockets mm mm mm mm /32" /8" /4" /16" mm mm mm mm /4" /16" /16" /4" mm mm mm mm /32" /2" /8" /16" mm mm mm mm /16" /16" /16" /8" mm mm mm mm 11 Six-Point Metric /2" /16" mm mm mm Dual-Mark Deep Sockets /16" " 1/2 Inch Drive Sockets mm mm mm mm /8" 15 Six-Point Standard Dual-Mark Sockets mm mm mm mm 15 Twelve-Point Metric Dual-Mark Sockets /8" /8" 11 Six-Point Standard mm mm mm mm /16" /16" Dual-Mark Deep Sockets mm mm mm mm /2" " /2" /8" mm mm mm mm /16" /16" /16" /16" mm mm mm /8" /8" /8" " 10 Twelve-Point Standard mm mm /16" /16" /16" /16" Dual-Mark Deep Sockets mm mm /4" /4" /4" /8" /16" /32" mm mm /16" /16" /32" /8" mm 14 Six-Point Metric Dual-Mark Sockets 9 Six-Point Metric Dual-Mark Deep Sockets /4" /16" 11 Six-Point Standard mm mm mm mm /32" /2" Dual-Mark Deep Sockets mm mm mm mm /16" /16" /8" /4" mm mm mm mm 3/8 Inch Drive Sockets /16" /16" mm mm mm mm 13 Six-Point Standard Dual-Mark Sockets /2" /8" mm mm mm /4" /16" /16" /16" mm mm 13 Twelve-Point Standard /16" /4" /8" " mm mm Dual-Mark Deep Sockets /8" /16" /16" 6 Eight-Point Standard Dual-Mark Sockets /16" /8" /16" /8" 11 Six-Point Metric /16" /8" /2" /16" /2" /16" Dual-Mark Deep Sockets /2" /16" /16" " /16" " mm mm /16" /4" /8" /16" /8" mm mm 19 Twelve-Point Standard Dual-Mark Sockets /16" /8" 17 Six-Point Metric Dual-Mark Sockets mm mm /8" /16" /4" /16" mm mm mm mm /16" /8" /16" mm mm mm mm /2" /16" 15 Twelve-Point Metric mm mm mm /16" " Dual-Mark Deep Sockets mm mm 11 Twelve-Point Standard /32" /16" mm mm mm mm Dual-Mark Deep Sockets /8" /8" mm mm mm mm /8" /4" /32" /16" mm mm mm mm /16" /16" /16" /4" mm mm mm mm /2" /8" /4" /2" mm mm mm /16" /16" /32" mm mm 5 Eight-Point Standard Dual-Mark Sockets /8" " 24 Twelve-Point Metric Dual-Mark Sockets mm mm /4" /16" /16" mm mm mm /16" /2" 13 Twelve-Point Metric mm mm arton /8" Dual-Mark Deep Sockets mm mm Set Wt. lbs mm mm mm mm MIXED DRIVE SOKET SETS FRTIONL/STNDRD/INH RFTSMN UILT FOR THE TOUGHEST JOS 6 POINT 8 POINT 12 POINT UNIVERSL METRI 141

7 SOKETS MIXED DRIVE SOKET SETS MDE IN US MIXED DRIVE SOKET SETS P. ULTIMTE SOKET SET /4 Inch Drive Sockets 3/8 Inch Drive Sockets 10 Six-Point Standard Sockets /32" /16" /16" /32" /32" /8" /4" /16" /32" /2" 10 Six-Point Metric Sockets mm mm mm mm mm mm mm mm mm mm 9 Twelve-Point Standard Sockets /16" /32" /32" /8" /4" /16" /32" /2" /16" 9 Six-Point Standard Deep Sockets /16" /32" /32" /8" /4" /16" /32" /2" /16" 10 Six-Point Metric Deep Sockets mm mm mm mm mm mm mm mm mm mm 12 Six-Point Standard Sockets /16" /16" /8" /4" /16" /16" /2" /8" /16" /16" /8" " 13 Six-Point Metric Sockets mm mm mm mm mm mm mm mm mm mm mm mm mm 5 Eight-Point Standard Sockets /4" /16" /16" /2" /8" 10 Twelve-Point Standard Sockets /16" /8" /8" /16" /16" /4" /2" /16" /16" /8" 12 Twelve-Point Metric Sockets mm mm mm mm mm mm mm mm mm mm mm mm 9 Six-Point Standard Deep Sockets /8" /16" /16" /4" /2" /16" /16" /8" /8" 10 Six-Point Metric Deep Sockets mm mm mm mm mm mm mm mm mm mm 9 Twelve-Point Standard Deep Sockets /8" /16" /16" /4" /2" /16" /16" /8" /8" 12 Twelve-Point Metric Deep Sockets mm mm mm mm mm mm mm mm mm mm mm mm 1/2 Inch Drive Sockets 15 Six-Point Standard Sockets /8" /16" /2" /16" /8" /16" /4" 13/16" 7/8" 15/16" 1" 1-1/16" /8" /2" /4" 13 Twelve-Point Standard Sockets /16" /8" /2" /16" /16" " /8" /16" /16" /8" /4" /4" /16" 19 Twelve-Point Metric Sockets mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 4 Six-Point Standard Deep Sockets /16" /16" /4" /16" 11 Twelve-Point Standard Deep Sockets /2" /8" /16" /16" /8" " /16" /16" /4" /8" /16" arton Set Wt. lbs

8 1/4" DRIVE SOKETS 1/4" DRIVE STNDRD & METRI HEX IT SOKETS Size Inch atalog Size Metric atalog 1/16" 5/64" 3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" * * * * * * * mm 2.5mm 3mm 4mm 5mm 6mm * * * * * * 1/4" DRIVE SREWDRIVER IT SOKETS Size atalog Size atalog T-10 T * T-20 T Size atalog E /4" DRIVE SOKETS 1/4" DRIVE TORX IT SOKETS 1/4" DRIVE EXTERNL TORX SOKETS Size Inch atalog Size Metric atalog Size atalog 3/16" Slotted 7/32" Slotted 1/4" Slotted * #1 Phillips #2 Phillips E6 E P. STNDRD MIXED DRIVE SOKET RK SET /4" Drive Socket Rack 3/8" Drive Socket Rack 1/2" Drive Socket Rack 1/ P. METRI MIXED DRIVE SOKET RK SET Includes 1/4", 3/8" and 1/2" Drive Socket Racks 1/4" DRIVE SOKET RK /4" Drive Socket Rack /4" Drive Socket Rack Replacement Studs (set of 5) 1/4" DRIVE SOKET RK /4" Drive Socket Rack 1/4" Drive Socket Rack Replacement Studs * available 9/15/13 FRTIONL/STNDRD/INH RFTSMN QULITY SINE POINT 8 POINT 12 POINTU METRI UNIVERSL 163

9 SOKETS 1/4" DRIVE TOOLS 1/4" DRIVE TOOLS MDE IN US 1/4" DRIVE EXTENSION RS atalog Overall Shaft Outside Driver Length Diameter End Description 1-1/2" Extension ar 3" Extension ar 6" Extension ar 14" Extension ar MDE IN US 1/4" DRIVE FLEX EXTENSION atalog Overall Shaft Outside Driver Length Diameter End Description 4" Flex Extension MDE IN US 1/4" DRIVE QUIK-RELESE EXTENSION RS 1/4 atalog Description 3" Quick-Release Extension ar 6" Quick-Release Extension ar 10" Quick-Release Extension ar Overall Shaft Outside Driver Length Diameter End /4" DRIVE EXTENSION RS /2" Extension ar * 2" Extension ar " Extension ar " Extension ar * 10" Extension ar " Extension ar 1/4" DRIVE FLEX EXTENSION R Flex Extension ar 1/4" DRIVE QUIK-RELESE EXTENSION RS " Quick-Release Extension ar 6" Quick-Release Extension ar " Quick-Release Extension ar 4 P. 1/4" DRIVE EXTENSION R SET /2" Extension ar 3" Extension ar 6" Extension ar Hang Tag 6" Spinner Handle Set Wt. lbs P. 1/4" DRIVE QUIK-RELESE EXTENSION R SET " Quick-Release Extension ar 6" Quick-Release Extension ar 10" Quick-Release Extension ar Hang Tag Set Wt. lbs. 0.5

10 SOKETS 1/2" DRIVE TOOLS 1/2" DRIVE TOOLS MDE IN US 1/2" DRIVE EXTENSION RS atalog Overall Length Description 2" Extension ar 3" Extension ar 6" Extension ar 10" Extension ar 20" Extension ar Shaft Outer Diameter Driver End MDE IN US 1/2" DRIVE LK OXIDE EXTENSION RS atalog Description 3" lack Oxide Extension ar 6" lack Oxide Extension ar 10" lack Oxide Extension ar Overall Length Shaft Outer Diameter Driver End /2" DRIVE EXTENSION RS 1/ " Extension ar " Extension ar * 5" Extension ar " Extension ar 10" Extension ar 20" Extension ar 1/2" DRIVE LK OXIDE EXTENSION RS " lack Oxide Extension ar 6" lack Oxide Extension ar " lack Oxide Extension ar 3 P. 1/2" DRIVE EXTENSION R SET " Extension ar 6" Extension ar Hang Tag " Extension ar Set Wt. lbs. 1.8

11 RTHETING WRENHES RTHETING WRENHES 12 P. FLT OX END WRENH SET /4 x 5/16" x 8 mm /8 x 7/16" x 10 mm /2 x 9/16" x 13 mm /8 x 3/4" x 15 mm /16 x 7/8" x 21 mm x 1-1/16" arton /8 x 1-1/4" Set Wt. lbs P. FLT OX END WRENH SET /4 x 5/16" /8 x 3/4" /8 x 7/16" /16 x 7/8" /2 x 9/16" Plastic Tray Set Wt. lbs P. FLT OX END WRENH SET x 8mm x 15mm x 10mm x 21mm x 13mm Plastic Tray Set Wt. lbs P. OFFSET OX END WRENH SET /4 x 5/16" /8 x 3/4" /8 x 7/16" /16 x 7/8" /2 x 9/16" Plastic Tray Set Wt. lbs P. OFFSET OX END WRENH SET x 8mm x 15mm x 10mm x 21mm x 13mm Plastic Tray Set Wt. lbs

12 HND TOOLS DJUSTLE WRENHES DJUSTLE WRENHES 3 P. DJUSTLE WRENH SET Made in US " " Set Wt. lbs " 2 P. DJUSTLE WRENH SET Made in US " " Set Wt. lbs P. DJUSTLE GINT WRENH SET Made in US " " Set Wt. lbs " D DJUSTLE WRENHES Made in US atalog D Size oating Wt. lbs. 6" Plated " Plated " Plated " Plated D DJUSTLE WRENHES Made in US atalog D Size oating Wt. lbs. 4" Plated " Plated " Plated " Plated " Plated " Plated " Plated " Plated

13 DJUSTLE & SPEILTY WRENHES 4 P. DJUSTLE LK OXIDE WRENH SET Made in US " " Set Wt. lbs " " 3 P. DJUSTLE LK OXIDE WRENH SET Made in US " " Set Wt. lbs " LK OXIDE DJUSTLE WRENHES Made in US atalog D Size oating Wt. lbs. 4" lack Oxide " lack Oxide " lack Oxide " lack Oxide " lack Oxide " lack Oxide " lack Oxide " lack Oxide " ONSTRUTION WRENH Made in US Easy jaw adjustment with large, serrated knurl Spud wrench for proper alignment of holes lack oxide finish, with a thin, slightly tapered jaw for access in tight work areas Wt. lbs D DJUSTLE & SPEILTY WRENHES HEVY DUTY PIPE WRENH PLIERS Made in US Machined undercut tongue & groove reduces strain on bolt Precision machined pipe wrench style teeth Drop-forged steel, heat treated for strength and durability lack vinyl grip handles for strong gripping Wt. lbs HEVY DUTY ST IRON PIPE WRENHES Made in US " Heavy Duty ast Iron Pipe Wrench- 1-1/2" capacity " Heavy Duty ast Iron Pipe Wrench- 2" capacity " Heavy Duty ast Iron Pipe Wrench- 2-1/2" capacity Sturdy cast-iron housing and I-beam handle with full-floating forged hookjaw, featuring self-cleaning threads with replaceable hook and heel jaws RTHET PIPE UTTER Large cutting diameter 1/8" to 1-1/8" (3mm to 28mm) Ratchets in 5º increments while cutting 360º around tubing Durable, lightweight construction Ideal for use on: stainless steel, brass, aluminum, copper, PV, thin wall tubing Wt. lbs. 1.0 RTHET PIPE UTTER REPLEMENT LDE raftsman replacement blade for raftsman internal ratcheting pipe/hose cutter Wt. lbs RFTSMN QULITY SINE

14 PLIERS R JOINT PLIERS Made in US Size atalog D Wt. Inch oating lbs. 7" lear oat /2" lear oat " lear oat /2" lear oat Forged alloy steel, heat treated for strength and durability lear protective coating for increased corrosion-resistance iased teeth for gripping on round or hex surfaces Textured grips are contoured for comfort and control Flushrivet design for easy access into narrow areas D PLIERS SLIP JOINT PLIERS WITH WIRE UTTING SLOT Made in US Size atalog Wt. Inch oating lbs. 6-3/4" lear oat " lear oat " lear oat Precision machined serrated teeth for maximum grip Forged alloy steel, heat treated for strength and durability Textured grips are contoured for comfort and control Exceeds all SME & NSI standards Flushrivet design for easy access into narrow areas LINESMN PLIERS Made in US Size atalog Wt. Inch oating lbs. 7" lear oat /2" lear oat Precision machined serrated teeth for maximum grip Forged alloy steel, heat treated for strength and durability Textured grips are contoured for comfort and control Exceeds all SME & NSI standards High-leverage rivet location for an improvement in cutting and gripping LONG NOSE PLIERS Made in US Size atalog Wt. Inch oating lbs. 6" lear oat " lear oat Precision machined serrated teeth for maximum grip Forged alloy steel, heat treated for strength and durability Textured grips are contoured for comfort and control Exceeds all SME & NSI standards High-leverage rivet location for an improvement in cutting and gripping DIGONL-UTTING PLIERS Made in US Size atalog Wt. Inch oating lbs. 5" lear oat " lear oat " lear oat Induction hardened cutters Forged alloy steel, heat treated for strength and durability Textured grips are contoured for comfort and control Exceeds all SME & NSI standards High-leverage rivet location for an improvement in cutting and gripping RFTSMN TOOLS, L ND FIELD TESTED 321

15 SNIPS 3 P. OMPOUND LEVERGE VITION SNIP SET Made in US Right cut snips Left cut snips Straight cut snips uts left, right and straight Wt. lbs. 2.9 SNIPS OMPOUND LEVERGE VITION SNIPS, REGULR RIGHT UT Made in US 10" nominal length 18 gauge cold-rolled sheet steel/22 gauge stainless steel sheet cutting capacity ompound leverage handle action, double overwind spring 1" length of cut, hot drop-forged blades Grade 8 center bolt threaded into bottom blade keeps blades in adjustment uts straight and tight curves to the right Wt. lbs OMPOUND LEVERGE VITION SNIPS, REGULR STRIGHT UT Made in US 10" nominal length 18 gauge cold-rolled sheet steel/22 gauge stainless steel sheet cutting capacity ompound leverage handle action, double overwind spring 1" length of cut, hot drop-forged blades Grade 8 center bolt threaded into bottom blade keeps blades in adjustment uts straight and wide curves to the left and right Wt. lbs OMPOUND LEVERGE VITION SNIPS, ULLDOG/NOTHING Made in US 9" nominal length 16 gauge cold-rolled sheet steel/18 gauge stainless steel sheet cutting capacity ompound leverage handle action, double overwind spring 7/8" length of cut, hot drop-forged blades Grade 8 center bolt threaded into bottom blade keeps blades in adjustment uts thick sheet steel and multiple thickness of sheet (seams) up to 0.062" Wt. lbs OMPOUND LEVERGE VITION SNIPS, REGULR LEFT UT Made in US 10" nominal length 18 gauge cold-rolled sheet steel/22 gauge stainless steel sheet cutting capacity ompound leverage handle action, double overwind spring 1" length of cut, hot drop-forged blades Grade 8 center bolt threaded into bottom blade keeps blades in adjustment uts straight and tight curves to the left Wt. lbs OMPOUND LEVERGE VITION SNIPS, LONG UT Made in US 11-1/2" nominal length 20 gauge cold-rolled sheet steel/24 gauge stainless steel sheet cutting capacity ompound leverage handle action, double overwind spring 3" length of cut, hot drop-forged blades Grade 8 center bolt threaded into bottom blade keeps blades in adjustment uts long straight cuts and wide curves to the left and right Wt. lbs " REPLELE LDE SNIPS Made in US Magnesium cast handles for strength and lightweight uts up to 22 gauge cold-rolled sheet steel 3-1/2" Length of cut Wt. lbs. 1.0 Wt. lbs. 1.0 RFTSMN TOOLS, L ND FIELD TESTED 327

16 SREWDRIVERS E D SLOTTED SREWDRIVERS Made in US Size atalog D E Inch Handle/lade 1/8 x 2" w/ lip Extruded/Satin /8 x 4" Extruded/Satin /16 x 1-1/2" Extruded/Satin /16 x 4" Extruded/Satin /16 x 4" ab Extruded/Satin /16 x 6" Extruded/Satin /16 x 8" ab Extruded/Satin /16 x 9" Extruded/Satin /4 x 1-1/2" Extruded/Satin /4 x 4" Extruded/Satin /4 x 6" Extruded/Satin /4 x 8" Extruded/Satin /16 x 1-3/4" Extruded/Satin /16 x 6" Extruded/Satin /16 x 8" Extruded/Satin /8 x 12" Extruded/Satin /8 x 8" Extruded/Satin SREWDRIVERS E D PHILLIPS SREWDRIVERS Made in US Size atalog D E Inch Handle/lade #0 x 2-1/2" Extruded/Satin #1 x 1-1/2" Extruded/Satin #1 x 3" Extruded/Satin #2 x 1-1/2" Extruded/Satin #2 x 4" Extruded/Satin #2 x 6" Extruded/Satin #2 x 8" Extruded/Satin #3 x 6" Extruded/Satin #4 x 8" Extruded/Satin E D TORX SREWDRIVERS Made in US Size atalog D E Inch Handle/lade T10 x 3" Extruded/Satin T15 x 3" Extruded/Satin T20 x 3" Extruded/Satin T25 x 3" Extruded/Satin T27 x 4" Extruded/Satin T30 x 4" Extruded/Satin T6 x 3" Extruded/Satin ROERTSON SREWDRIVERS Made in US Size atalog Size atalog # # RFTSMN TOOLS, L ND FIELD TESTED 333

17 HND TOOLS SPEILTY SREWDRIVERS SPEILTY SREWDRIVERS OFFSET SREWDRIVER Made in US Nickel plated, high carbon heat-treated steel For use in close quarters Slotted 1/4" and Phillips #2 Wt. lbs. 0.1 RTHETING OFFSET SREWDRIVER Ratchets adjust at forward and backward positions lade sizes: 1/4" slotted and #2 crosspoint Wt. lbs P. REVERSILE OFFSET RTHET SET Ratchet handle, 1/4" and 3/8" slotted blades. #1 and #2 Phillips blades Driver adjusts for right or left hand use Overall length 3.975" Wt. lbs P. REVERSILE RTHETING OFFSET SREWDRIVER IT WRENH SET Made in US 25 offset head Magnetic bit holder Vinyl grip Raised knurl makes fingertip turning easy Reversing lever 1/4", and 9/32" slotted, #1 and #2 Phillips bits Wt. lbs P. PREISION SREWDRIVER SET Includes 5 tempered steel blades:.040",.055",.070",.100" slotted and one #0 Phillips blade Screw chuck with knurled handles Includes storage case Wt. lbs. 0.1 MULTI-IT SREWDRIVER Made in US Jeweler's style precision for mechanics, do-it-yourselfers, more lades: 1/16", 5/64", 3/32" slotted, Phillips and T6 Torx Wt. lbs P. FINGER IT SREWDRIVER Made in US Includes one Phillips #2, one Phillips 1/4" slotted and one 1/4" drive Heavy duty mini-driver uses 1/4" square drive, 1/4" hex bits Generates substantial torque, and comes in bright, easy-to-access colors Wt. lbs T-HNDLE SREWDRIVER an also be used as a straight screwdriver. Traditional screwdriver position for normal use, switch to T-handle for higher torque applications Phillips blade tips are designed to provide tight tolerance and fit utyrate handles are designed for high strength and chemical resistance lloy steel shaft is heat-treated for maximum strength and durability. right chrome nickel finish omes with two ball-detent double sided bits: ¼ x #2 and 3/16 x #1 Wt. lbs

18 6-IN-1 SREWDRIVER SPEILTY SREWDRIVERS Interchangeable doubled ended bits: 3/16" and 1/4" slotted, #1 and #2 Phillips its store in shaft Wt. lbs P. REDYIT RTHETING SREWDRIVER SET Soft grip handle for comfort Onboard bit storage in handle Includes 15 assorted bits Wt. lbs P. RTHETING MGNETI SREWDRIVER SET Six Phillips bits, #0, (2) #1, (2) #2, and #3; five slotted bits, 5/32", (2) 3/16", 1/4", 5/16"; three square bits, #1, #2, #3; Six Torx, T-10, T-15, T-20, T-25, T-27, T-30; five hex, 3/16", 1/4", #4, #5, #6 Unique six bit storage system that lets you dial the bit you want Knurled stainless steel shaft allows faster turning and resists corrosion Forward, reverse, and lock positions for fast driving of screws and nuts Smooth ratcheting action, ergonomic design Wt. lbs. 0.4 UTOLODING MULTI-IT SREWDRIVER No Touch bit exchange saves time and changes bits in seconds Includes 3 Phillips and 3 slotted industrial grade bits with magnetic tips Uses industry standard 1" x 1/4" insert bits its are replaceable and customizable Drive shaft is stainless steel Wt. lbs SPEILTY SREWDRIVERS 4 P. PIK SET Made in US ent and hooked L shaped and straight Wt. lbs. 0.1 SREW STRTER Starts most standard screws with 15 in. lbs. torque Releases automatically lloy steel blade, overall length 5-5/8" Wt. lbs. 0.2 SRTH WL Made in US Use for marking in wood or metal working Wt. lbs. 0.1 TK PULLER Made in US Use for pulling tacks, clips, staples, brads and small nails Wt. lbs OTTLE OPENER Made in US High strength stainless steel Leather strap for hanging Wt. lbs RFTSMN UILT FOR THE TOUGHEST JOS 337

19 PUNHES & HISELS D PUNH ND HISEL HOLDER Made in US atalog D E oating Plating Designed to keep hand away from shaft of chisels utyrate handle for chemical resistance, heat treated head and screw Holds up to 7/8" hex stock, securely clamps to hex stock Wt. lbs. 0.5 E PUNHES & HISELS D E PUNHES Made in US Size atalog D E Inch oating 1/16 x 4" lack Oxide /32 x 4" lack Oxide /8 x 4-1/2" lack Oxide /32 x 5" lack Oxide /16 x 5" lack Oxide /4 x 5-1/2" lack Oxide hrome vanadium steel lack oxide finish D E LIGNMENT TOOLS Made in US Size atalog D E Inch oating 1/8 x 5-1/2" lack Oxide /32 x 3/8 x 7" lack Oxide /16 x 1/2 x 9" lack Oxide /4 x 12" lack Oxide hrome vanadium steel lack oxide finish RFTSMN TOOLS, L ND FIELD TESTED 345

20 PRY RS 3 P. PRY R SET Made in US Includes: 12", 17" and 25" pry bars ar claws are bent at a 23-degree angle Store in soft bag or molded case, both included Wt. lbs PRY RS PRY RS Made in US Size Inch atalog Size Inch atalog 3/8 x 12" /2 x 25" * 3/8 x 17" /2 x 31" STEEL WREKING RS Made in US Size atalog Size atalog Size atalog Inch Inch Inch 1/2 x 12" /4 x 24" /4 x 30" " PRY R Made in US 1/2 x 16" Wt. lbs " RIP R Made in US 3/4" hex Wt. lbs " REVERSED HOOK PRY R Made in US Increased leverage on both ends Measures 15" long Wt. lbs. 1.7 NIL PULL ND PRY RS Made in US /2" Flat prying bar and nail puller Wt. lbs /2" Pry bar Wt. lbs oth made of high carbon steel 16" ROLLING WEDGE R º polished rolling head Measures 16" long 9/16" diameter Wt. lbs. 1.3 * available 6/1/13 RFTSMN QULITY SINE

21 PUTTY & UTILITY KNIVES WIDE PUTTY KNIVES atalog Size Type Wt. Lbs /2" Stiff /2" Flex /4" Extra stiff Stainless steel blade lade extends the length of the handle for strength Soft ergo handle, hammer end TPE KNIVES atalog Size Type Wt. Lbs " Flex " Flex 0.37 Stainless steel blade lade extends the length of the handle for strength Soft ergo handle, hammer end SRPERS atalog Size Type Wt. Lbs " Stiff " Flex Stainless steel blade lade extends the length of the handle for strength Soft ergo handle, hammer end PUTTY & UTILITY KNIVES LINOLEUM KNIFE Hawkbill Hardwood handle Wt. lbs P. LOKK UTILITY KNIFE SET First knife uses full-sized utility blades, has nylon belt pouch Second knife accepts mini utility blades, can be attached to keychain onvenient blade changing mechanism on both require no tools Wt. lbs LUMINUM SLIDE LOKING UTILITY KNIFE SET Includes standard and mini sized utility knife Lightweight anodized aluminum handle utility knife Quick blade changing mechanism Wt. lbs WOOD LOKK UTILITY KNIFE Premium folding lockback utility knife with leather holster Stainless steel and polished hardwood handle with belt clip Quick change blade mechanism One hand opening operation and back lock Wt. lbs RFTSMN UILT FOR THE TOUGHEST JOS 355

22 UTO/SPEILTY MIRRORS & PIK UP TOOLS MIRRORS & PIK UP TOOLS MGNETI TELESOPING PIK-UP TOOL Lifts dropped metal objects up to 2 lbs. Telescopes from 5-1/2" to 15-1/2" Wt. lbs /4" DIMETER ROUND INSPETION MIRROR djustable to any angle Telescopes from 10" to 14" Wt. lbs X 2" OVL INSPETION MIRROR MGNETI TELESOPING PIK-UP TOOL Double ball and socket joint for 360 range Telescopes from 16-3/4" to 26-3/4" Wt. lbs P. SPEILTY TOOL KIT With inspection mirror, magnetic pick-up tool lso 2 screw starters, double pointed scribe Wt. lbs /2" overall length djustable to any angle Wt. lbs. 0.1 POKET MGNETI TELESOPING PIK-UP TOOL /8 X 3-1/2" RETNGULR INSPETION MIRROR onvenient and portable Picks up dropped metal objects Wt. lbs. 0.5 djustable to any angle Telescopes from 11-1/4" to 15-1/4" Wt. lbs /4" DIMETER ROUND INSPETION MIRROR Magnetic pickup Telescopes from 5-3/4" to 25-3/4" Wt. lbs. 0.1 FLEXILE PIK-UP TOOL WITH SPRING JWS Working plunger directs 4 spring loaded claws Overall length 23-1/2" Wt. lbs