TECHNICAL MANUAL NEW PANDINO 4. GSM Telephonics Communicator WITH QUAD-BAND GSM INDUSTRIAL MODULE

Transcription

1 TECHNICAL MANUAL NEW PANDINO 4 GSM Telephonics Communicator WITH QUAD-BAND GSM INDUSTRIAL MODULE GSM TELEPHONE COMMUNICATOR IS IN CONFORMITY WITH ALL THE ESSENTIAL REQUIREMENT OF DIRECTIVE 1999/5/CE 89/336/CEE 73/23/CEE TECHNICAL STANDARD EN info@sirsen.it

2 Contents Main / technical features. Notes for the first installation. Characteristics of the factory settings. Restore with the factory settings. Insert the SIM card. Connection diagram. Programming Mode Enter the programming mode. Go back to the active mode. Set up 1to 4 inputs in N.O. / N.C. mode. How to configure the inputs 1 to 4 in outputs. Set up 1to 6 outputs in Bistable/Monostable mode. Programme phone numbers. Delete a phone contact. How to schedule SMS messages to channels 1 to 4. How to exclude / include voice that will be heard when the dialer. Programme the access code. Record the voice message. Call test. Programme the number of call cycles. Programme the duration of the alarm call. Set up the date and time. Programme the expiry date of the SIM card. Programme the phone contacts per SIM card expiry date. Delete a phone contact per SIM card expiry date. Remote control function. Activate the remote control function. Programme the phone contacts for the remote control function. Delete the phone contacts for the remote control function. Programme the remote access code. Vitality text message. Enter the remote function. Remote functions table. Active mode Use the keypad to stop an ongoing alarm. View a phone contact with all the available options. Phone function (ONLY OUTGOING CALLS). View the status of the 1 to 4 inputs. View the number of call cycles. Listen to a voice mail message. Programme via text message. How to view SMS text messages of channels 1 to 4. Display the alarm history. View the duration of the alarm call. View the programmed settings (dumping). View the expiry date of the SIM card. View the phone number of the SIM card expiry date. page 01 page 02 page 03 page 03 page 14 pages page 04 page 04 page 05 page 06 page 07 page 08 page 09 page 10 page 11 page 12 page 13 page 13 page 16 page 16 page 17 page 17 page 18 page 18 page 19 page 19 page 20 page 20 page 21 page 21 page 22 page 22 page 23 page 23 page 24 page 24 page 24 page 25 page 25 page 26 page 27 page 28 page 28 page 29 page 29

3 -Two-way phone communicator with industrial QUAD-BAND MODULE. -4 alarm channels with transition. -The input related to the 1/2/3/4 channel can be N.O./N.C. as programmed through the keypad. -Nine phone contacts per channel. -Channels 1/2/3/4 can be individually programmable outputs. -SMS-alarm freely programmable. -SMS sending-periodic Vitality. -History of the last 50 alarm events. -Phone function (only outgoing calls). -Voice mail and text message sending. -Programming by text message sending. -Remote control function. -Test function. -Outputs (1 to 6) that can be remotely activated (also with ongoing alarm). -The input related to the outputs (1 to 6) can be Bistable/Monostable as programmed by the keypad. -Standard microphone for local listening that can be remotely activated "also with an ongoing alarm. -Possibility to stop the ongoing calls (only the first phone contact for each channel). -Possibility to exclude oneself from the cycle of ongoing calls. -Date and time. -Compatibility with international SIM cards. -Audio notification of the activated PIN code, if any. -Notification of SIM card expiry date with pre-recorded text messages. -Check for the right insertion and operation of the SIM card. -View of network coverage level. -Notification of network coverage presence. -Possibility of viewing the memory contents: phone contacts, calls cycles, reproduction of voice message, etc. -Messages and phone contacts on non-volatile memory. -Backlit programming keypad. Technical features. -12 VDC Power supply. -Power absorption in stand-by 40 ma. -Power absorption in alarm mode 140 ma. -External GSM antenna. -Backlit LCD Display with 32 characters. -Display contrast adjustment trimmer. -Switch for preventing the opening of the casing. Main features 1

4 Notes for the first installation Insert the SIM card and supply power to the dial see page 12. A guide voice will suggest the required precautions for an optimum installation. To stop the guide voice press the CANC key and press the "OK" key to continue. Connect the alarm inputs (N.O./N.C. that can be independently programmed through the keypad) to the relevant actuators (free N.A. changeover in the alarm station, receiver for telecare system, anti-robbery buttons, etc..). Connect the open collector outputs (monostable/bistable that can be independently programmed through the keypad) that can be remotely activated also with an ongoing alarm, independently. Moreover, it is possible to check the status of the outputs: -Calling the dialler SIM card, enter the access code and follow the instructions of the guide voice. -During an alarm, enter the desired function (only the first phone contact programmed for each channel is allowed to perform this function). Only the first phone contact of each channel can stop all the ongoing calls and is allowed to perform the functions of the guide menu. The other numbers, after they answered the alarm call, will not be called in a subsequent cycle, if any. The remote control function (ID) allows the dialler to be activated without the aid of a central unit. The activation is performed by recognizing the programmed phone number (see page 15). This function can be useful for the implementation of small systems (garage, camper van, boats, vehicles, etc.). In order to check the credit balance of the SIM card and its expiry date, simply call your operator using the direct call of the dialler. In order to enter the programming mode, enter the code (default code is 123) and press OK. Repeat the same procedure to go back to the active mode. In order to enter the remote function, call the dialler from any phone and you will be requested to enter the access code (default code is 4567) and follow the guide voice. Remote programming by text message (max 145 characters). 2

5 Access code = 123 Factory settings Remote access code = 4567 Duration of the alarm call = 30 Call cycles = 3 Channels = N.O. Outputs 1-2 = Bistable. Restore with the factory settings IN ORDER TO RESTORE THE GSM WITH THE FACTORY SETTINGS: 1) DISCONNECT THE GSM FROM THE POWER SUPPLY. 2) ENERGIZE THE GSM BY KEEPING THE DEFAULT BUTTON PRESSED ON THE CIRCUIT BOARD (see connection diagram pages 12-13). 3) WAIT FOR THE DISPLAY TO SHOW: FACTORY SETTINGS Note: RESTORING THE FACTORY SETTINGS WILL DELETE ALL THE PREVIOUS PROGRAMMING. 3

6 Enter the programming mode Turn the GSM on (12Vcc) and wait for the display to show ACTIVE MODE. FIELD 26 ACTIVE MODE In order to access the programming mode, enter: 123 and press OK 123 = access code (the display will show PROGRAM MODE ) 123 ACTIVE MODE CAMPO 26 MODE PROGRAM The access code to programming 123 is set by the manufacturer and can be changed see page 07 Go back to the active mode In order to access the ACTIVE mode, enter: 123 and press OK 123 = access code (the display will show ACTIVE MODE ) 123 MODE PROGRAM FIELD 26 ACTIVE MODE 4

7 Mode program Set up the 1 to 4 inputs in N.O. / N.C. mode In order to set up the 1 input in N.C. mode -Enter: 1 0 #20 and press OK 1 0 #20 Function code 1 = Channel 1 2 = Channel 2 3 = Channel 3 4 = Channel 4 0 = N.C. 1 = N.O. 5

8 Program Mode How to configure the inputs 1 to 4 in outputs Before proceeding make sure that the GSM is in programming phase (program mode). See pag.04 Eg Configure channels 1and 2 mode inputs and outputs in 3and4 Channel1 Channel2 Channel3 Channel4 - Digit #24 and press OK to confirm 0 = Input 1 = Output Function code (not editable) 6

9 Mode program Set up the 1 to 6 outputs in Monostable/ Bistable mode. In order to set up the 1 output in Monostable mode. -Enter: 1 1 #10 and press OK 1 1 #10 Function code 1 = Output 1 2 = Output 2 3 = Output 3 4 = Output 4 5 = Output 5 6 = Output 6 1 = Monostable 2 = Bistable 7

10 Mode program Programme the phone numbers E.g.: programming the phone number (max 23 figures) with GSM call option with voic message, connected to channel 1 in position 1 -Enter: #02 and press OK = phone number (max 23 characters) = star symbol 11 = desired option (see table below) 1 = input channel (1 to 4) 01 = position of the phone number (from 01 to 09) #02 = final function code Option Option Option Call options table 11 text message sending only 12 voice call only 13 voice call + text message 8

11 Delete a phone number Mode program E.g.: delete the phone number connected to channel 1 in position 1. -Enter: 1 01 #02 and press OK 1 = input channel (1 to 4) 01 = position of the phone number (from 01 to 09) #02 = final function code 9

12 Modo program How to schedule SMS messages to channels 1to 4 Before proceeding make sure that the GSM is in programming phase (program mode). See pag.04 To schedule an SMS - Digit 1 #24 and press OK to dial the message 1 = Channel1 2 = Channel2 3 = Channel3 4 = Channel4 Function code (not editable) To write the text message "max 35 characters including space" use the alphanumeric keypad dialer (space key ) confirm with the OK key to each character. To save the message, press the OK button. 10

13 Program mode How to exclude / include voice that will be heard when the dialer -Digit Before proceeding make sure that the GSM is in programming phase (program mode). See pag.04 To exclude the voice: -Digit 0 #27 and press OK To include the item: 1 #27 and press OK 11

14 Mode program Programme the access code E.g.: Programme a three-digit code 789 (from 1 to 26 digits). -Enter: 789 #05 and press OK 789 = code (from 1 to 26 digits). #05 = final function code 12

15 Mode program Record a voic message E.g.: record the voic message connected to channel 1 -Enter: 1 #04 and press OK 1 = input channel (1 to 4) #04 = final function code (the display will show RECORD CHANNEL 1 ) FRONT VIEW OF THE GSM Note: the recording time of the message is 12 seconds for channel. MICROPHONE 1 4 GHI PQRS ESC CANC 2 ABC 3 DEF 5 JKL 6 MNO 8 TUV 9 WXYZ 0 + #,@ MENU O K i Test call Mode program -Enter: #22 and press OK The dialler will make a test call by dialling the first number of the first channel. 13

16 Before inserting the SIM card Activate the SIM card and, before inserting it, disable the PIN code and any functions activated by your phone operator, such as: voic , call transfer etc. using a mobile phone. To insert or remove the SIM card, remember to disconnect the power supply from the GSM dialler. If the SIM card is inserted or removed when the GSM dialler is powered, this may result in breaking or blocking the SIM card, even in the presence of network coverage. DISPLAY CONTRAST ADJUSTMENT TRIMMER MICROPHONE INPUT SIM CH1 CH2 CH3 CH4 AUX *INPUT BLOCK +/- ALLOWS TO STOP THE CALLS WITH A MONOSTABLE CONTROL (5-12 volt POSITIVE OR NEGATIVE) *INPUT BLOCK +/- TAMPER N.C. ALARM INPUT CONNECTED TO CHANNEL 1 N.O. OR N.C. COMMON INPUTS ALARM INPUT CONNECTED TO CHANNEL 2 N.O. OR N.C. ALARM INPUT CONNECTED TO CHANNEL 3 N.O. OR N.C. ALARM INPUT CONNECTED TO CHANNEL 4 N.O. OR N.C. POSITIVE PRESENT UPON ACTIVATION (REMOTE CONTROL FUNCTION) EXTERNAL POWER SUPPLY 12Volt LAMP 1/2/3/4 INPUTS CAN BE PROGRAMMED IN OUTPUT. SEE PAGE.6 KEY TO RESTORE THE FACTORY SETTINGS See page 03 CH5 CH6 ENABLED=NEGATIVE PRESENT DISABLED=NEGATIVE ABSENT Note = MAX LOAD 100Ma GSM ANTENNA 14 15

17 Mode program Programme the call cycles E.g.: Programme 3 call cycles. -Enter: 03 #07 and press OK 03 = number of call cycles (from 01 to 10). #07 = final function code Note: text messages are sent only during the first call cycle. Mode program Programme the duration of the alarm call E.g.: programme the duration of the alarm call at 20 seconds. -Enter: 20 #06 and press OK 20 = the duration of the alarm call (from 20 to 60). The duration is expressed in seconds. #06 = final function code 16 9

18 Set the date and time Mode program E.g.: Set the date -Enter: DD MM YY HH MM #16 DD = Day MM = Month YY = Year HH = Hour MM = Minutes #16 = final function code and press OK Mode program Programme the SIM card expiry date E.g.: programme the SIM card expiry date -Enter: DD MM YY HH MM #18 and press OK DD = Day MM = Month YY = Year HH = Hour MM = Minutes #18 = final function code 17

19 Mode program Programme phone numbers per SIM card expiry date -Enter: E.g.: Programme phone number #17 01 Mode program Delete a phone number per SIM expiry date -Enter: 01 #17 and press OK and press OK = phone number (max 23 characters) = star symbol 01 = position of the phone number (from 01 to 05) #17 = final function code Note: The SIM card expiry date is notified by means of a pre-set text message "NOTIFICATION OF FORTHCOMING SIM CARD EXPIRY DATE" which cannot be modified. = SIM card expiry date function code (cannot be modified) 01 = position of the phone number (from 01 to 05) #17 = final function code 18

20 REMOTE CONTROL FUNCTION - The Remote control function allows the user to remotely "Turn on" "Turn off" the device with just one phone ring, without any cost. - The device can be turned on and off only by recognizing the stored phone number (max 5 phone numbers), - The call can be made from any phone; both landline and mobile phones. - Thus, the Remote control function cannot be used with calls where the number is not visible. - When the Remote control function is ACTIVE: a variation of the status of the 1 to 6 inputs starts the alarm call. - The Remote control function allows the dialler to work even without the aid of a central unit. - The Remote control function provides a positive in the AUX output that is present at the time of activation max 20mA. (see page 13) where we recommend connecting a led to view the status of the activation. Activate the Remote control function - Programme the phone number (max 5 phone numbers) for remote Turning on Off see page 15 - After programming, the dialler will automatically activate the remote control function. 19

21 Mode program Programme the phone numbers for (Remote control function) -Enter: #15 and press OK Mode program Delete a phone number by ID (Remote control function) 20 E.g.: programme the phone number = phone number (max 23 characters) = star symbol 01 = position of the phone number (from 01 to 05) #15 = final function code E.g. Delete an ID phone number in the first position -Enter: 01 #15 and press OK = star symbol 01 = position of the phone number (from 01 to 05) #15 = final function code

22 Mode program Programme the remote access code E.g.: programme a new code 2578 (always 4 digits) -Enter: 2578 #23 and press OK 2578 = code (always consisting of 4 digits) #23 = final function code Vitality text message Mode program E.g.: sending a vitality text message of the GSM every 30 days. -Enter: 30 #13 and press OK 30 = number of days #13 = final function code 21

23 Remote access 1)Dial the phone number of the SIM card of the GSM dialler. 2) After a set number of rings (2/4 RINGS), the dialler will ask you to enter the remote access code 4567 DEFAULT. 3)Enter the desired option (see functions table). Press Press Press Functions table To stop the ongoing calls. Note: only the first number of each channel To activate the loudspeaker. After activating the loudspeaker, the volume can be adjusted: Press 0 to turn down the volume Press 1 to raise the volume To Know and Change states of outputs listen to the help menu 22

24 Active mode Stop an ongoing alarm with the keypad E.g.: stop an ongoing alarm through the keypad -Enter: 789 and press OK 789 = acess code After stopping the ongoing alarm, the GSM dialler enters the programming mode PROGRAM MODE. Thus, it is necessary to restore the ACTIVE MODE in the dialler by entering the access code. See page 04 Active mode View a phone number with all the available options Before proceeding, make sure that the GSM is active (active mode). See page 04 E.g.: view the phone number connected to channel 1 in position 01. -Enter: 1 01 #01 and press OK 1 = channel (1 to 4) 01 = position of the phone number (from 01 to 09) #01 = final function code 23

25 Active mode Phone function (only outgoing calls) 24 Before proceeding, make sure that the GSM is active (active mode). See page 04 Enter the phone number followed by #12 and press OK -Enter: #12 Note: press the ESC key to stop the call Active mode View the status of the 1 to 4 inputs -Enter: Before proceeding, make sure that the GSM is active (active mode). See page 04 #21 Active mode View the call cycles number Before proceeding, make sure that the GSM is active (active mode). See page 04 #09 and press OK #21 = final function code -Enter: and press OK #09 = final function code and press OK

26 Active mode Listen to the voic message E.g.: Listening to the voic message related to channel 1. -Enter: Before proceeding, make sure that the GSM is active (active mode). See page 04 1 #03 and press OK 1 = channel (1 to 4) #03 = final function code Active mode Programming via text message Before proceeding, make sure that the GSM is active (active mode). See page 04 For programming via text message (max 145 characters), it is necessary to write a text message from any phone with the access code (123 by default) and the desired programming type and send it to the phone number of the SIM card of the dialler. Before writing the text message, please note: 1) always start the text message with the access code, followed by a comma 2) do not leave empty spaces 3) separate each programming string with a comma 4) never put a comma at the end of the text message 25

27 Active Mode How to view SMS text messages of channels 1 to 4 Before proceeding, please ensure that GSM is in active (active mode). See pag.04 Ex. Display the SMS channel 1. -Digit 1 #11 and press OK 1 = Channel1 2 = Channel2 3 = Channel3 4 = Channel4 Function code (not editable) 26

28 Display the alarm history Active Mode Before proceeding, please ensure that GSM is in active (active mode). See pag.04 -Digit: #26 and press OK # 26 = function code end OK = Enter key The dialer will display the last 50 alarm events 27

29 Active mode View the duration of the alarm call Before proceeding, make sure that the GSM is active (active mode). See page 04 E.g.: view the duration of the alarm call. -Enter: #08 and press OK #08 = final function code Note: the duration is expressed in seconds. Active mode View all the programmed settings (dumping) Before proceeding, make sure that the GSM is active (active mode). See page 04 E.g.: View all the programmed settings (dumping) -Enter: #00 and press OK #00 = final function code 28

30 Active mode View the expiry date of the SIM card Before proceeding, make sure that the GSM is active (active mode). See page 04 E.g.: View the SIM card expiry date -Enter: #19 #19 = final function code and press OK Active mode View a phone number of the SIM card expiry date Before proceeding, make sure that the GSM is active (active mode). See page 04 E.g.: View the phone number in 01 position. -Enter: 01 #17 and press OK 01 = position of the phone number (from 01 to 05) #17 = final function code 29

31 NAME OF TECHNICAL COMPANY NAME INSTALLATION DATE MATURITY GUARANTEE TESTING SERVICE PERFORMED DATE VERIFICATION TECHNICAL