CERTIFICATE OF PRODUCT CONFORMITY
|
|
|
- Adele Simon
- 5 years ago
- Views:
Transcription
1 CERTIFICATE OF PRODUCT CONFORMITY Dubai Central Laboratory Department (DCLD) of Dubai Municipality, hereby attests that the product(s) DEFORMED AND PLAIN CARBON STEEL FOR CONCRETE REINFORCEMENT (Details as per the attached Scope of Certification) manufactured by ICDAS CELIK ENERJI TERSANE VE ULASIM SANAYI A.S. have been assessed in accordance with DCLD Document Ref. No. RD-DP21- IC Ge1eral Rules for DM third party product certificatio1 system through factory assessme1t a1d the releva1t Specific Rules, a1d were fou1d i1 co1formity with the sta1dard specificatio1: ASTM A 615/A 615M Accordingly, DCLD hereby authorizes the above manufacturer to affix the DCL Product Conformity Mark to the above-mentioned product(s). Verify: for / ENGR. AMIN AHMED AMIN Director, Dubai Central Laboratory Department Dubai Municipality Certificate No: CL Current Issue Date: 25 November 2017 Valid Until: 24 November 2018 Original Issue Date: 25 November 2008 The attached Scope of Certification bearing the same Certificate No. forms an integral part of this Certificate. This Certificate is an electronic document, subject to the Terms and Conditions of the Product Certification System and shall not be reproduced except in full. F-IC-2031 REV 11
2 DCL PRODUCT CONFORMITY CERTIFICATION SCHEME SCOPE OF CERTIFICATION FOR CERTIFICATE NO. CL Certificate Issued To: ICDAS Celik Enerji Tersane Ve Ulasim Sanayi A.S. Applicable Standard Specification: ASTM A615 /A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement Applicable Specific Rules: RD-DP21-8 IC Specific Rules for Certification of Deformed and Plain Carbon Steel Bars for Concrete Reinforcement (as per ASTM A 615A/ 615M-2013) Through Factory Assessme1t. S/N Product Description Marking Product Details 1 Deformed carbon steel bars for concrete reinforcement As per attached DCL Approved Bar Markings in accordance with RD-DP (IC) Grade 60 Diameter Size : 6 mm to 50 mm in bars NOTE1: NOTE2: This document forms part of the Certificate of Product Conformity bearing the same certificate number. The above product shall bear the DCL Conformity Mark. Original Issue Date : 25 November 2008 Current Issue Date : 25 November 2017 Valid Until : 24 November 2018 Head of Products Conformity Assessment Section Dubai Central Laboratory Department Page 1 of 1 P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE F-IC-2032 R6
3 PRODUCTS CONFORMITY ASSESSMENT SECTION APPROVED STEEL BAR MARKING Certification Scheme for Reinforcing Steel CERTIFIED FACTORY FACTORY LOCATION CERTIFICATE NUMBER ICDAS Celik Enerji Tersane Ve Ulasim Sanayi A.S. (Canakkale) Turkey CL COUNTRY CODE 8 MILL NUMBER 71 STANDARD SPECIFICATION ASTM A615 /A615M NOTE: Please refer to the Certificate mentioned above and its Scope of Certification for details regarding the validity and the sizes covered. APPROVED BY: Head, Products Conformity Assessment Section F-IC-2045 R2
4 TRIAL MODE a valid license will remove this message. See the keywords property of this PDF for more information. CERTIFICATE OF PRODUCT CONFORMITY Dubai Central Laboratory Department (DCLD) of Dubai Municipality, hereby attests that the product(s) CARBON STEEL BARS FOR REINFORCEMENT OF CONCRETE (Details as per the attached Scope of Certification) manufactured by ICDAS CELIK ENERJI TERSANE VE ULASIM SANAYI A.S. have been assessed in accordance with DCLD Document Ref. No. RD-DP (IC) General Rules for DM third party product certification system through factory assessment and the relevant Specific Rules, and were found in conformity with the standard specification: BS 4449:1997 with Amd. 1 Accordingly, DCLD hereby authorizes the above manufacturer to affix the DCL Product Conformity Mark to the above-mentioned product(s). Verify: for / ENGR. AMIN AHMED AMIN Director, Dubai Central Laboratory Department Dubai Municipality Certificate No: CL Current Issue Date: 25 November 2017 Valid Until: 24 November 2018 Original Issue Date: 25 November 2008 The attached Scope of Certification bearing the same Certificate No. forms an integral part of this Certificate. This Certificate is an electronic document, subject to the Terms and Conditions of the Product Certification System and shall not be reproduced except in full. F-IC-2031 REV 11
5 DCL PRODUCT CONFORMITY CERTIFICATION SCHEME SCOPE OF CERTIFICATION FOR CERTIFICATE NO. CL Certificate Issued To: Applicable Standard Specification: Applicable Specific Rules: ICDAS Celik Enerji Tersane Ve Ulasim Sanayi A.S. BS 4449:1997 with Amd. 1- Specification for Carbon Steel Bars for Reinforcement of Concrete RD-DP (IC) Specific Rules for Certification of Carbon Steel Bars for the Reinforcement of Concrete (BS 4449:1997 with Amd. 1) Through Factory Assessment. S/N Product Description Marking Product Details 1 Carbon steel bars for the reinforcement of As per attached DCL Approved Bar Markings in accordance with Grade 460B Diameter Size : 6 mm to 50 mm bars concrete RD-DP (IC) NOTE1: NOTE2: This document forms part of the Certificate of Product Conformity bearing the same certificate number. The above product shall bear the DCL Conformity Mark. Original Issue Date: 25 November 2008 Current Issue Date: 25 November 2017 Valid Until : 24 November 2018 Head of Products Conformity Assessment Section Dubai Central Laboratory Department Page 1 of 1 P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE F-IC-2032 R6 TRIAL MODE a valid license will remove this message. See the keywords property of this PDF for more information.
6 PRODUCTS CONFORMITY ASSESSMENT SECTION APPROVED STEEL BAR MARKING Certification Scheme for Reinforcing Steel CERTIFIED FACTORY FACTORY LOCATION CERTIFICATE NUMBER ICDAS Celik Enerji Tersane Ve Ulasim Sanayi A.S. (Canakkale) Turkey CL COUNTRY CODE 8 MILL NUMBER 71 STANDARD SPECIFICATION BS 4449:1997 with AMD 1 NOTE: Please refer to the Certificate mentioned above and its Scope of Certification for details regarding the validity and the sizes covered. APPROVED BY: Head, Products Conformity Assessment Section TRIAL MODE a valid license will remove this message. See the keywords property of this PDF for more information. F-IC-2045 R2
7 TRIAL MODE a valid license will remove this message. See the keywords property of this PDF for more information. CERTIFICATE OF PRODUCT CONFORMITY Dubai Central Laboratory Department (DCLD) of Dubai Municipality, hereby attests that the product(s) STEEL FOR THE REINFORCEMENT OF CONCRETE WELDABLE REINFORCING STEEL (Details as per the attached Scope of Certification) manufactured by ICDAS CELIK ENERJI TERSANE VE ULASIM SANAYI A.S. have been assessed in accordance with DCLD Document Ref. No. RD-DP (IC) General Rules for DM third party product certification system through factory assessment and the relevant Specific Rules, and were found in conformity with the standard specification: BS 4449: A3: 2016 Accordingly, DCLD hereby authorizes the above manufacturer to affix the DCL Product Conformity Mark to the above-mentioned product(s). Verify: for / ENGR. AMIN AHMED AMIN Director, Dubai Central Laboratory Department Dubai Municipality Certificate No: CL Current Issue Date: 25 November 2017 Valid Until: 24 November 2018 Original Issue Date: 25 November 2008 The attached Scope of Certification bearing the same Certificate No. forms an integral part of this Certificate. This Certificate is an electronic document, subject to the Terms and Conditions of the Product Certification System and shall not be reproduced except in full. F-IC-2031 REV 11
8 DCL PRODUCT CONFORMITY CERTIFICATION SCHEME SCOPE OF CERTIFICATION FOR CERTIFICATE NO. CL Certificate Issued To: Applicable Standard Specification: ICDAS Celik Enerji Tersane Ve Ulasim Sanayi A.S. BS 4449: A3: Specification for Steel for the Reinforcement of Concrete-Weldable reinforcing steel-bar, coil and decoiled product Applicable Specific Rules: RD-DP (IC) Specific Rules for Certification of Reinforcing Steel Bars (as per BS 4449: A3:2016) Through Factory Assessment. S/N Product Description Marking Product Details 1 Steel for the reinforcement of concrete As per attached DCL Approved Bar Markings in accordance with RD-DP (IC) Grade B500B Diameter Size : 6 mm to 50 mm bars NOTE1: NOTE2: This document forms part of the Certificate of Product Conformity bearing the same certificate number. The above product shall bear the DCL Conformity Mark. Original Issue Date : 25 November 2008 Current Issue Date : 25 November 2017 Valid Until : 24 November er 2018 Head of Products Conformity Assessment Section Dubai Central Laboratory Department P.O. Box 67, DCL, Zabeel Road, Karama, Dubai, UAE TRIAL MODE a valid license will remove this message. See the keywords property of this PDF for more information. F-IC-2032 R6
9 PRODUCTS CONFORMITY ASSESSMENT SECTION APPROVED STEEL BAR MARKING Certification Scheme for Reinforcing Steel CERTIFIED FACTORY FACTORY LOCATION CERTIFICATE NUMBER ICDAS Celik Enerji Tersane Ve Ulasim Sanayi A.S. (Canakkale) Turkey CL COUNTRY CODE 8 MILL NUMBER 71 STANDARD SPECIFICATION BS 4449: A3:2016 NOTE: Please refer to the Certificate mentioned above and its Scope of Certification for details regarding the validity and the sizes covered. APPROVED PROV BY: Head, Products Conformity Assessment Section TRIAL MODE a valid license will remove this message. See the keywords property of this PDF for more information. F-IC-2045 R2
CERTIFICATE OF PRODUCT CONFORMITY
CERTIFICATE OF PRODUCT CONFORMITY Dubai Central Laboratory Department (DCLD) of Dubai Municipality, hereby attests that the product(s) STEEL FOR THE REINFORCEMENT OF CONCRETE WELDABLE REINFORCING STEEL
DCL PRODUCT CERTIFICATION
DCL PRODUCT CERTIFICATION ADDING CONFIDENCE TO GREEN BUILDING PRODUCTS AND MATERIALS 3 rd Annual Quality Assurance for Sustainable Construction Materials Conference and Workshop December 15-16, 2015 Abdulla
Certificate of Product Performance
Certificate of Product Performance has satisfied the Authority that it complies with the rules of the ACRS Scheme. Where appropriate, and as listed below, it has further satisfied the Authority that it
APPLICATION FOR AIR EMISSION TESTING BODY (AETB) ACCREDITATION
APPLICATION FOR AIR EMISSION TESTING BODY (AETB) ACCREDITATION Source Emission Measurement Quality Assurance Programs (SEMQAP) Stack Testing Accreditation Council (STAC) A. Purpose of Application: Mark
CERTIFICATE OF APPROVAL No CF 694 3M UK LTD
CERTIFICATE OF APPROVAL No CF 694 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of 3M Centre, Cain Road,
Registration Statement Form 13(N) Extraprovincial Cooperative Association
Freedom of Information and Protection of Privacy Act (FOIPPA): Personal information provided on this form is collected, used and disclosed under the authority of the FOIPPA and the for the purposes of
PRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS
Ref No: RACS/PCS/11 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Energy Drinks
MIFARE Security Evaluation Scheme
Scheme Rev. 2.0 9 December 2016 Scheme Application Form Document information Info Content Keywords MIFARE, Security, Evaluation, Certification Abstract Application form and Guidance Notes for the Scheme
PRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM
Ref No: RACS/PCS/20 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Metrology System
Ref No: RACS/PCS/10 Page 1 of 7. Revision No: 00 Revision Date: October 1, 2018 PRODUCT CERTIFICATION SCHEME FOR ELECTRICAL EQUIPMENT
Ref No: RACS/PCS/10 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Electrical
PRODUCT CERTIFICATION SCHEME FOR WATER PRODUCTS
Ref No: RACS/SOP/31 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology(ESMA) to assure that Water
Unofficial translation
Unofficial translation LAW OF THE REPUBLIC OF ARMENIA Approved by National Assembly on 9 November 1999 ON THE CONFORMITY ASSESSMENT OF PRODUCTS AND SERVICES TO NORMATIVE REQUIREMENTS Article 1. Scope of
High Security Roller Shutters. factories retail shops loading bays warehouses industrial units
High Security Roller Shutters Where higher levels of security is a main concern, the LPS1175 approved Centurion Shutter resists attempts at forced entry from SR1 right up to SR4 to combat the most determined
GRCA FULL MEMBER GRADE (GRC Manufacturer) Regulations, Membership Procedure and Assessment
GRCA FULL MEMBER GRADE (GRC Manufacturer) Regulations, Membership Procedure and Assessment The International Glassfibre Reinforced Concrete Association (GRCA) October 2017 The International Glassfibre
MANAGEMENT SYSTEM CERTIFICATION BODY PT. INTERNATIONAL CERTIFICATION SERVICES QUALITY MANUAL RULES FOR USE OF LOGOS AND CERTIFICATION MARKS
Page 1 / 10 1. Scope 1.1 These guidelines contain provisions for using the International Certification Services (ICS) Logo, hereinafter referred to ICS logo to be used by companies / institutions / agencies
MCS: 005. Product Certification Scheme Requirements: Solar Photovoltaic Modules. Issue 2.3
MCS: 005 Product Certification Scheme Requirements: Solar Photovoltaic Modules Issue 2.3 This Microgeneration Installation Standard is the property of Department of Energy and Climate Change (DECC), 3
KENYA ACCREDITATION SERVICE
KENAS-POL-004 02 06/08/2018 06/09/2018 POL 1 of 5 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Authored by ASSISTANT DIRECTOR
D101 Dowel-In (DI) TECHNICAL DATA SHEET DESCRIPTION
DESCRIPTION The Dayton Superior Dowel-In is used to splice rebar in slab mats, column cages, walls, segmental pours etc. The threaded end of the Dowel-In is enlarged by forging, before threading, to ensure
Subsea Performance Bolt Workshop
Subsea Performance Bolt Workshop API Spec Q1, Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry, 9 th Edition API Spec
The Need for Regulations For Private Labs Certification. Waleed Khaled Eid, PhD Consultant, Sematco Soil and Engineering Material Testing Co. W.L.L.
The Need for Regulations For Private Labs Certification Waleed Khaled Eid, PhD Consultant, Sematco Soil and Engineering Material Testing Co. W.L.L. Outline Current Practice in Kuwait Sematco Soil & Engineering
Training Requirements. Quality Control Personnel Training
Training Requirements Quality Control Personnel Training 2 QC Personnel Training: Know Where to Find the Rules FDOT Section 105 FDOT Materials Manual Section 6.2 (RCP) Section 6.3 (Precast Box Culverts)
PRODUCT CERTIFICATION SCHEME FOR MECHANICAL-CUSTOMIZED VEHICLES
Ref No: RACS/SOP/57 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Mechanical Customized
TURKISH STANDARDS INSTITUTION
TURKISH STANDARDS INSTITUTION NEW GLOBAL OLD APPROACH REGULATIONS CONFORMITY ASSESSMENT PROCEDURES AND PRINCIPLES Board Decision : 29.04.2014 Date 50.-236 Validity date : 05.05.2014 CHAPTER ONE Objective,
ISO Second edition Corrected version Reference number ISO :2012(E)
INTERNATIONAL STANDARD ISO 18436-1 Second edition 2012-11-15 Corrected version 2013-01-15 Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part
ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 2: Supporting documentation
INTERNATIONAL STANDARD ISO/IEC 17050-2 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 2: Supporting documentation Évaluation de la conformité Déclaration de conformité
MINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians
MINIMUM QUALIFICATIONS FOR SPECIAL INSPECTORS, Fabricators, Special Inspection Agencies, Testing Labs and Laboratory Technicians ORION TOWNSHIP BUILDING DEPARTMENT A. FABRICATORS A.1. Fabricators: Not
REVISION INFORMATION SHEET ONTARIO PROVINCIAL STANDARDS FOR ROADS AND PUBLIC WORKS
Ontario Provincial Standards Unit 301 St. Paul St., 2 nd Floor North St. Catharines, ON L2R 7R4 REVISION INFORMATION SHEET ONTARIO PROVINCIAL STANDARDS FOR ROADS AND PUBLIC WORKS VOLUME 7 MUNICIPAL-ORIENTED
Certification Policies for Concrete Laboratory Testing Technician Level 1 Concrete Laboratory Testing Technician Level 2
Certification Policies for Concrete Laboratory Testing Technician Level 1 Concrete Laboratory Testing Technician Level 2 Approved by the Certification Programs Committee July 6, 2007 Last revised by the
Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation
Accreditation Body Evaluation Procedure for AASHTO R18 Accreditation Final August 9, 2016 Page 1 of 12 Section Number Table of Contents Title of Section 0 Purpose 1 Scope 2 References 3 Objectives 4 Criteria
PRODUCT CERTIFICATION SCHEME FOR FOOD CONTACT MATERIALS
Ref No: RACS/PCS/07 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Food
OIML-CS PD-05 Edition 2
PROCEDURAL DOCUMENT OIML-CS PD-05 Edition 2 Processing an application for an OIML Type Evaluation Report and OIML Certificate OIML-CS PD-05 Edition 2 ORGANISATION INTERNATIONALE DE MÉTROLOGIE LÉGALE INTERNATIONAL
ISO/IEC INTERNATIONAL STANDARD. Conformity assessment Supplier's declaration of conformity Part 1: General requirements
INTERNATIONAL STANDARD ISO/IEC 17050-1 First edition 2004-10-01 Conformity assessment Supplier's declaration of conformity Part 1: General requirements Évaluation de la conformité Déclaration de conformité
Consumer Product Safety Certification IOM Workshop on Certification April 13, 2010
Consumer Product Safety Certification IOM Workshop on Certification April 13, 2010 This presentation has not been reviewed or approved by the Commission and may not reflect its views 1 What Products Must
Microgeneration Certification Scheme: MCS 005
Microgeneration Certification Scheme: MCS 005 Product Certification Scheme Requirements: Solar Photovoltaic Modules Issue 2.5 This Microgeneration Installation Standard is the property of Department of
ISO INTERNATIONAL STANDARD. Hexalobular socket pan head tapping screws. Vis à tôle à tête cylindrique bombée large à six lobes internes
INTERNATIONAL STANDARD ISO 14585 First edition 2001-09-01 Hexalobular socket pan head tapping screws Vis à tôle à tête cylindrique bombée large à six lobes internes Reference number ISO 14585:2001(E) ISO
Quality Assurance Procedure Use of Accreditation Body & FP Certification FZE Marks, Logos and Symbols
Index 1.0 Purpose 2.0 Scope 3.0 References 4.0 Definitions 5.0 Responsibilities 6.0 Procedure 7.0 Records FP Certification Template Rev 002 1.0 Purpose 1.1 This procedure describes the applicable, rules
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES. Rules on Use of ACCAB Accreditation Symbols & Logos
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Rules on Use of ACCAB Accreditation Symbols & Logos ACCAB-ASM-13.0 CONTROLLED COPY
C E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20120831-E181848 Report Reference E181848-19960719 Issue Date 2012-AUGUST-31 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER, MA 01810 This
Japan Plywood Inspection Corporation
About Us Contact & Question to e-mail address : info@jpic-ew.or.jp Japan Plywood Inspection Corporation History Ⅰ. History of JAS Law and Japan Plywood Inspection Corporation (JPIC) 1949 JPIC was established
MODULE B - PROCESS SUBMODULES B1.
Slide 1 MODULE B - PROCESS SUBMODULES B1. Organizational Structure B2. Standards Development: Roles and Responsibilities B3. Conformity Assessment: Roles and Responsibilities B4. Initiating Standards Projects
C E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20141229-E135493 Report Reference Issue Date E135493-A27-UL 2014-DECEMBER-29 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER MA 01810 This
PEFC Norway Standard Document PEFC Norway ST 2002:2009 Issue
PEFC-Norge PEFC/03-1-01 Fremmer bærekraftig skogbruk - For mer info: www.pefc.org Our ref.: IKO - Oslo, 2009-10-15 PEFC09239 PEFC Norway Standard Document PEFC Norway ST 2002:2009 Issue 1 2009-10-15 PEFC
C E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20150625-E135493 Report Reference Issue Date E135493-A28-UL 2015-JUNE-25 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER MA 01810 This is to
Policy for Certification of Private Label Products Within the Cradle to Cradle Certified Certification Scheme. Version 1.0.
Policy for Certification of Private Label Products Within the Cradle to Cradle Certified Certification Scheme Version 1.0 March 2015 Copyright, Cradle to Cradle Products Innovation Institute, 2015 Cradle
PRODUCT CERTIFICATION SCHEME FOR FOOD-HONEY PRODUCTS
Ref No: RACS/PCS/14 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Honey
Discontinuing the Metallic Handcuffs Compliance Testing Program and Request for
This document is scheduled to be published in the Federal Register on 09/14/2016 and available online at https://federalregister.gov/d/2016-22057, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE
CERTIFICATE OF APPROVAL No CF 5349 TAIWAN DAEDALUS DOOR CONTROL CO. LTD
1 CERTIFICATE OF APPROVAL No CF 59 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of TAIWAN DAEDALUS DOOR
Microgeneration Certification Scheme: MCS 005
Microgeneration Certification Scheme: MCS 005 Product Certification Scheme Requirements: Solar Photovoltaic Modules Issue 3.0 This Microgeneration Guidance Document is the property of Department for Business,
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61754-4 Edition 2.0 2013-07 Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 4: Type SC connector family INTERNATIONAL ELECTROTECHNICAL
CENTRAL MARKS DEPARTMENT III. Our Ref: CMD III/16: IS (Part 3)
CENTRAL MARKS DEPARTMENT III Our Ref: CMD III/16: IS 16333 (Part 3) 04-08-2017 Subject: Revised Guidelines for Implementation of IS 16333 (Part 3): 2016 - Mobile Phone Handsets-Part 3 - Indian Language
PRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS
Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys
THE USE OF CERTIFICATE, CI INTERNATIONAL MARK AND STANDARDS MALAYSIA ACCREDITATION MARK (QMS & EMS)
1.0 Form, Size and Colour of the CI International and Accreditation Mark 1.1 Where practicable, the Accreditation Mark shall be reproduced in the form and size as detailed in the Logo Master in Figure
Minimum Scheme Requirements to Certify Criminal Justice Restraints Described
This document is scheduled to be published in the Federal Register on 07/13/2017 and available online at https://federalregister.gov/d/2017-14638, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE
UL TEST REPORT AND PROCEDURE
Issue Date: 2010-07-15 Page 1 of 18 Report Reference # E317867-A26-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60950-1, 2nd Edition, 2011-12-19 (Information Technology Equipment
No. of 6000/- Per Paper =.
ROLL NO: APPLICATION FOR CHARTERED ACCOUNTANT MEMBERSHIP EXAMINATION To, The Executive Director ICAN Latest PP Size Photo Candidate should affix his/her specimen signature on the photo I request for permission
American Association for Laboratory Accreditation
Page 1 of 5 This document describes the accreditation requirements for organizations performing activities associated with Stationary Source Evaluation Testing per the requirements of ASTM D7036 (2004).
VOLUME ONE OF THE BUILDING CODE OF AUSTRALIA AND THE STRUCTURAL ENGINEER
PRACTICE NOTE NO: 16 Version 1 Amended May 2007 Page 1 of 7 Volume One of the building Code of Australia deals with Class 2 to Class 9 Buildings. A Structural Engineer is primarily concerned with two sections
TRFTTE. ISDN Gateway A104 / A104D / A104E / A104DE / RSVLC-1002B A108 / A108D / A108E / A108DE. Nemko Canada Inc.
www.nemko.com Report reference No 144310-2TRFTTE Test item description Model ISDN Gateway A104 / A104D / A104E / A104DE / RSVLC-1002B A108 / A108D / A108E / A108DE Testing Laboratory Address Nemko Canada
This is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-3-1 Edition 1.0 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3-1: IECQ Approved Component Products, Related Materials &
BABT 738. A guide to applying for US Equipment Approval for telephony terminal equipment through TÜV SÜD BABT as a TCB
BABT 738 A guide to applying for US Equipment Approval for telephony terminal equipment through TÜV SÜD BABT as a TCB BABT is the Telecommunications Certification body of TÜV SÜD TÜV SÜD BABT 2012 Issue
Overview on Test & Certification in Wi-SUN Alliance. Chin-Sean SUM Certification Program Manager Wi-SUN Alliance
Overview on Test & Certification in Wi-SUN Alliance Chin-Sean SUM Certification Program Manager Wi-SUN Alliance 1 Contents General Overview Technical Steering Committee (TSC) Test and Certification Committee
WORK AUTHORIZATION NO. 4 CONTRACT FOR PROFESSIONAL ACCOUNTING SERVICES
WORK AUTHORIZATION NO. 4 CONTRACT FOR PROFESSIONAL ACCOUNTING SERVICES THIS WORK AUTHORIZATION is made pursuant to the terms and conditions of Article 5 of the Professional Accounting Services Contract
SECTION A (Personal Details)
SECTION A (Personal Details) 1. Name(please use block letters): Paste Photo (Title) - (First name) - (Middle name)- (Last name) 2. Date of Birth (dd/mm/yyyy): 3. Nationality: 4. Present position/appointment:
Collector certification across the world - challenge or opportunity
Collector certification across the world - challenge or opportunity Dipl.-Ing. Ulrich Fritzsche TÜV Rheinland Energy and Environmental Technology Director of Technical Competence Center Solar Thermal Tel.:
Compliance & Certification Phase 2 Path to Certification
Compliance & Certification Phase 2 Path to Certification Jose A. Rodrigo, AT4 wireless 11 November 2014 20 November 2014 AllSeen Alliance 1 Agenda 1. C&C Process Overview 2. Prepare / Apply / Test / Certify
PRODUCT CERTIFICATION SCHEME FOR ORGANIC PRODUCTS
Ref No: RACS/SOP/36 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Organic
Green Council Ltd Green Council Certification Scheme (GCCS)
1.0 Introduction Use of GC s 1.1 Organizations certified by Green Council Ltd (GC) management system certification schemes are entitled to use the GC s in accordance with the following conditions. 1.2
ISO/IEC Conformity assessment Fundamentals of product certification and guidelines for product certification schemes
INTERNATIONAL STANDARD ISO/IEC 17067 First edition 2013-08-01 Conformity assessment Fundamentals of product certification and guidelines for product certification schemes Évaluation de la conformité Éléments
Accreditation process (LA-I-02)
Accreditation process (LA-I-02) Bureau of Laboratory Accreditation Department of Science Service Ministry of Science and Technology 75/7 Rama VI Road, Ratchathewi District, Bangkok 10400 Tel: 0-2201-7325,
LMS Certifications Pvt. Ltd.
Page 1 of 5 Rev. No. 01 Rev. Date: 26-11-2016 Regd. office: 1 Anand Dhaam, Opp Kukrail Picnic Spot Gate, Faridi Nagar, Lucknow - 226015, India E Mail: info@lmscert.com ; Web: www.lmscert.com Phone: +91-9554645464;
PRODUCT CERTIFICATION SCHEME FOR OXO-BIODEGRADABLE PLASTIC
Ref No: RACS/PCS/06 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Oxo-biodegradable
ENVIRONMENTAL TEST REPORT N REV. N/C TEST STANDARDS: MIL-STD-202G
ENVIRONMENTAL TEST REPORT 1510-107N REV. N/C TEST STANDARDS: MIL-STD-202G For ANALOG DEVICES INC 3 TECHNOLOGY WAY NORWOOD, MA 02053 On ELECTRONICS MODULE MODEL NUMBER: NONE ; PART NUMBER: NONE ; SERIAL
Indonesia - SNI Certification Service Terms
Indonesia - SNI Certification Service Terms These Service Terms shall govern the Indonesian National Standard ( SNI ) Certification Services performed by the UL Contracting Party (as identified in the
Certification Policies for. Cement Physical Tester
Certification Policies for Last approved by the Certification Programs Committee February 9, 2017 The statements contained herein are a consolidation of proposed policies and procedures. This policy statement
C E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20171128-E135493 Report Reference Issue Date E135493-A36-UL 2017-NOVEMBER-28 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER, MA 01810-5424
PRODUCT CERTIFICATION SCHEME FOR DETERGENT PRODUCTS
Ref No: RACS/PCS/03 Page 1 of 7 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) to assure that Detergents
UL TEST REPORT AND PROCEDURE
Page C-28 of C-39 Report No.: E309264-D1020-1-UL Description UL TEST REPORT AND PROCEDURE Standard: ANSI/AAMI ES60601-1:2005/(R)2012, CSA CAN/CSA-C22.2 NO. 60601-1:14 Certification Type: Component Recognition
Florida Building Code Online
Florida Building Code Online http://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wgevxqwtdqsxyieb4opodd... Page 1 of 2 12/2/2010 BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats
CERTIFICATE OF LEVEL OF SERVICE (CLOS) EXTENSION SUBMISSION REQUIREMENTS FOR COMPLETENESS REVIEW
Building and Development Services Department 1112 Manatee Ave West, Suite 408 Bradenton, FL 34205 Phone: (941) 749 3070 www.mymanatee.org A 12 CERTIFICATE OF LEVEL OF SERVICE (CLOS) EXTENSION SUBMISSION
Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...
Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...
ISO 76 INTERNATIONAL STANDARD. Rolling bearings Static load ratings. Roulements Charges statiques de base. Third edition
INTERNATIONAL STANDARD ISO 76 Third edition 2006-05-01 Rolling bearings Static load ratings Roulements Charges statiques de base Reference number ISO 2006 PDF disclaimer This PDF file may contain embedded
INTERNATIONAL TELECOMMUNICATION UNION. WORLD TELECOMMUNICATION STANDARDIZATION ASSEMBLY Dubai, November 2012
INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU WORLD TELECOMMUNICATION STANDARDIZATION ASSEMBLY Dubai, 20-29 November 2012 Resolution 71 Admission of academia
DOCUMENTS REQUIRED ALONG WITH APPLICATION FORM FOR INDIVIDUALS
DOCUMENTS REQUIRED ALONG WITH APPLICATION FORM FOR INDIVIDUALS 1. Identity proof 2. Address proof 3. Self attested copies of the qualification certifications. This is required as proof for meeting the
USING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY
Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members
SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS
BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management
This is a preview - click here to buy the full publication
CONSOLIDATED VERSION IEC 61937-11 Edition 1.1 2018-11 colour inside Digital audio Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of www.nemko.com TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number....: 285604 Date of issue...: 2015-09-25
Accreditation Criteria For Conformity Assessment Bodies
Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2
WEBSITE GUIDE. 1. How to register at QCinASIA.com? How to book an order? How to check the price for the booked order?...
WEBSITE GUIDE INDEX: 1. How to register at QCinASIA.com?... 2 2. How to book an order?... 3 3. How to check the price for the booked order?... 10 4. How to review/revise/print an order?... 11 5. How to
TEST REPORT IEC or ISO Reference Number Title of the IEC or ISO Standard
IECEE OD-2020-F8:2018 IEC 2018 Ed.1.0 Cyber Security TRF Template 2018-06-05 Test Report issued under responsibility of: TEST REPORT IEC or ISO Reference Number Title of IEC or ISO Standard Report Number....
IHE International Conformity Assessment Program - Test Report
IHE International Conformity Assessment Program - Test Report IHE-ATL-001 IHE International Conformity Assessment Program IHE-CAS-2: 2015 April, 22 nd 2015 The product and version documented in this report
Connection Solutions
Connection Solutions Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 www.framecad.com FRAMECAD Connectors are designed for speed,
Product certification scheme requirements. Solar Photovoltaic Modules
Page 1 of 5 1. Introduction This document identifies the evaluation and assessment requirements and practices for the purposes of certification and listing of Solar Photovoltaic (PV) modules. Certification
FeliCa Approval for Security and Trust (FAST) Overview. Copyright 2018 FeliCa Networks, Inc.
FeliCa Approval for Security and Trust (FAST) Overview Introduction The security certification scheme called FeliCa Approval for Security and Trust (FAST) has been set up to enable the evaluation and certification
Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard
Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard Issue: 1.0 Date: 01/09/2015 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI QUALITY
National Certification Project
2011/SOM1/SCSC/CON1/022 Session 6 National Certification Project Submitted by: Korea Testing Laboratory (KTL) 6 th Conference on Good Regulatory Practice Washington, D.C., United States 1-2 March 2011