PRODUCTION QUALITY ASSURANCE CERTIFICATE. Initial date: 26 May, 2015
|
|
- Warren Chase
- 5 years ago
- Views:
Transcription
1 DNV GL PRODUCTION QUALITY ASSURANCE CERTIFICATE Certificate No.: CE-USA-ACCREDIA This certificate consists of 2 pages Initial date: 26 May, 2015 Valid: 14 May, May, 2021 This is to certify that the quality system of Flow Management Devices, LLC 5225 S 37th St. Ste Phoenix, AZ - USA has been assessed and found to comply with respect to the conformity assessment procedure described in ANNEX III MODULE D OF DIRECTIVE 2014/68/EU ON PRESSURE EQUIPMENT This certificate is valid for the following scope: Type of Pressure Equipment Product Name Pressure Accessory Prover Models 001, 003, 007, 015, 025, C25,035,A35,045,060,090, 130,200, 245 Place and date : Vimercate 15 May, 2018 For the notified body 0496: DNV GL Business Assurance Italia S.r.l. :". ~ 1!1 -..,: '5GCI\'OOIA """ OOJO $Gf ; OO!f'i ~.. <JC.'f l~t."ootp flloh-oojd "-S.~t.. D'M( 'S:.I (16)(; ~ Hl.oAr:A.;,~Iw-til'mco~~;~ $C".oQ'.~ttMJ ~~~~~~ ~GttG.Lo\D~LAtdo ~w v,.~m. --~seq.~~ t:.-...w f"ltj.c.t~i«aiuicperqit~ctlut~ ~t.a1t:t9 >~ Nicola Privata Management Representative DNV GL Business Assurance Italla S.r.l. Via Energy Park, 14, Vimercate (MB), Italy. Tel : Page 1 of 2
2 DNV GL Certificate No.: CE-USA-ACCREDIA Place and date: Vimercate 15 May, 2018 Rev ision No: 00 Jurisdiction Application of Directive 2014/68/EU and Decreta Legislative n. 26 of 15 February 2016 Certificate history Revision Description Issue date 00 Recertification - Replacing Cert May, CE-USA-ACCREDIA and addition of USA Precision Machining and Joe's Quality Welding Certificate reference (EU-Type Examination Certificate) Certificate No. Revision No. Expiry date Issued by Report No. Notified Body No. (if NoBo 0496) CE May Design Assessment HOU-ACCREDIA Report dated Products covered by this certificate Product name Product description Type of material Applied product standard FMD Flow Prover Models 001, 003, 007, 015, Austenitic steels Div. 1, , C25, 035, A35, 045, ed. 060, 090, 130, 200, 245 Sites covered by this certificate Site name Site Address Audited by Date Report ref Flow Management 5225 S 37th St Ste R Frueboes 3-4 April 6 April 2018 Devices, LLC 9082 Phoenix, AZ - USA 2018 USA Precision 8028 Va n Hut Ln., Houston, R Frueboes 2 April April 2018 Machining TX Joe's Quality 1207 Virginia St., South R Frueboes 2 April April 2018 Welding Houston, TX Applications/limitations See Type Examination Certificate for pressure and temperature limitations. This Certificate only relates to directives described above. Other directives, covering other phenomena, and, also having requirements related to CE marking, might also apply. Equipment is intended for industrial applications. Terms and conditions for the certificate Valid terms and conditions are found in the DNV GL s PED Certification Rules. END OF CERTIFICATE Lack of fulfilment of conditions as set out in the Certification Ag reement may rende r this Ce rtificate invalid. DNV GL Business Assurance!!alia S.r.l. Via Energy Park, 14, Vimercate (MB), Italy. Tel : businessassurance Page 2 of 2
3 DNV BUSINESS ASSURANCE EC TYPE - EXAMINATION CERTIFICATE Certificate No CE-HOU-ACCREDIA This certificate consists of 4 pages. This is to certify that the product(s) Pressure Accessory with name and/or type designation(s) Prover Models 001, 003, 007, 015, 025, C25, 035, A35, 045, 060, 090, 130, 200, 245 manufactured by Flow Management Devices, LLC 5225 S 37th St Ste Phoenix AZ - USA has been assessed with respect to the conformity assessment procedure described in annex III (module B) of Directive 97/23/EC on pressure equipment, as amended, and found to comply. Further details are given in the following pages. This certificate is valid until Place and date Vimercate (MB), for the Notified Body 0496 DNV GL Business Assurance Italia S.r.l. Giovanni Cortesi Nicola Privato Technical Reviewer Management Representative Page 1 of 4
4 Certificate No CE-HOU-ACCREDIA Jurisdiction Application of Pressure Equipment Directive 97/23/EC of the European Parliament and of the Council and Decreto Legislativo No. 93 of 25 February Certificate history Revision Description Issue date 00 Original certificate Products covered by this certificate Product name Product description Product version Category Class 150 Class 300 Class 150 Class ,900, 1500 FMD-001 thru FMD 007 FMD-001 FMD-015 thru FMD 245 FMD-003 thru FMD 245 FMD-001 thru FMD 245 III III IV IV IV Applied product standards Design data Models Maximum allowable pressure (PS) ANSI Class MAWP Minimum/maximum allowable temperature (TS) Fluid group All 1 (150#) 19.0 barg (275 psig) C / C 1 All 2 (300#) 49.6 barg (720 psig) C / C 1 All 3 (600#) 99 barg (1440 psig) C / C 1 All 4 (900#) 148 barg (2160 psig) FMD-003 thru FMD (1500#) 248 barg (3600 psig) C / C C / C 1 Page 2 of 4
5 Certificate No CE-HOU-ACCREDIA Applications/limitations Model Pressure Class and Volume FMD Model C A volume (L) volume (gal) Pressure Class Allowable Pressure at Elevated Temperature Temperature ( C) ANSI Flange Class 150# 300# 600# 900# 1500# Min Max psig bar psig bar psig bar psig bar psig bar ` Tests carried out on prototype(s) Product name DNV GL Prototype Test Model: H44C25(LR)1A3S1CBWWES Production site name Flow Management Devices, LLC Tests 99.3 bar g (2160 psig) / 4 hr - hold Address 5225 S. 37th Street, Ste. 4, Phoenix, AZ USA Inspection of manufacturing and testing of prototype(s) has been carried out by DNV GL Business Assurance USA, Inc., ref. design assessment report dated Page 3 of 4
6 Certificate No CE-HOU-ACCREDIA Documents reviewed Drawing/Document No. Revision Date Title Status *) DOC C Flow Prover Pressure Vessel Design Calculations A DOC H Hydrostatic Pressure Test Procedure A DOC - - Hydro Test Cert (Sample) FI COM A Nameplate Dwg A DOC C - PROVER_MANUAL A DOC A PED Technical File A DOC *) A = Approved, AC = Approved with comments, FI = For information DNV GL Prototype Test Model: H44C25(LR)1A3S1CBWWES A Terms and conditions The certificate is subject to the following terms and conditions: - in case of damages caused by defective products, Council Directive 85/374/EEC, as amended, will apply; - the certificate is only valid for the product(s) listed above. The following may render this certificate invalid: - changes in the design or construction of the product(s); - changes or amendments to the referenced directive(s); - changes or amendments in the standard(s) which form the basis for documenting compliance with the essential requirements of the directive(s). Conformity declaration and marking of product This certificate does not give the manufacturer the right to CE mark and put on the market the product(s) listed on this certificate. Only after the product(s) have been found to comply with the requirements in a following Conformity Assessment Module C1, D, E or F, the manufacturer may draw up an EC declaration of conformity and legally affix the CE mark followed by the identification number of the Notified Body involved in these modules. END OF CERTIFICATE Page 4 of 4
DNV BUSINESS ASSURANCE
DNV BUSINESS ASSURANCE PRODUCTION QUALITY MANAGEMENT CERTIFICATE - EC Certificate No. 6139-2015-CE-USA-ACCREDIA This certificate consists of 3 pages. This is to certify that the quality management system
More informationEC Certificate Full Quality Assurance System
241154-2017-CE-ITA-NA-PS Rev. 0.0 PRJC-403782-2012-MSL-ITA 14 December 2019 This is to certify that the quality system of: ANGELANTONI LIFE SCIENCE SRL For design, production and final product inspection/testing
More informationList of forms CLAP/WGP by subject /68/UE
List of forms CLAP/WGP by subject - 2014/68/UE Subject Assembly - Assembly including an item of pressure equipment placed on the market before 29 May 2002 in compliance with national pre-ped regulations
More informationGLOBALG.A.P CERTIFICATE
GLOBALG.A.P CERTIFICATE Certificate No. CERT-0230-200-EUREPGAP-ROM-SINCERT Registration No.: CERT0230200MSINCERT Date of Certification Decision 201-10-20 GGN Number.: 40499291902 Valid 201-11-04 201-11-03
More informationGLOBALG.A.P CERTIFICATE
GLOBALG.A.P CERTIFICATE Certificate No. 123140-2012-EUREPGAP-ITA-ACCREDIA Registration No.: CERT09582012GGVENACCREDIA Date of Certification Decision 2016-09-19 GGN Number.: 4052852273954 Valid 2016-09-24
More informationUSING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY
Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION
More informationRECOMMENDATION FOR USE
Page 1 of 6 TITLE CONTENT OF THE TECHNICAL FILE ORIGINATOR NB-RAIL STRATEGY SG SUBJECT RELATED TO Directives 2008/57/EC, 2009/131/EC, 2011/18/EU, Recommendation 2011/217/EU, Decision 2010/713/EU and all
More informationConformity assessment
Training Course on Conformity and Interoperability, Tunis-Tunisia, from 22 to 26 May 2017 Conformity assessment Presented by: Karim Loukil & Kaïs Siala Page 1 Today s Objectives Present basic information
More informationGLOBALG.A.P CERTIFICATE
GLOBALG.A.P CERTIFICATE Certificate No. 144804-2013-EUREPGAP-ITA-ACCREDIA Registration No.: CERT10422013GGITA Date of Certification Decision 2017-01-18 GGN Number.: 4052852609500 Valid 2016-12-12 2017-12-11
More informationMesekon Oy Turku ISO 9001:2008, ISO :2005
Certificate No. 2541-10 has granted this certificate as proof that the quality system of Turku complies with the requirements of the standard ISO 9001:2008, ISO 3834-2:2005 Certification covers Contract
More informationRECOMMENDATION FOR USE
Page 1 of 23 TITLE CONTENT OF EC CERTIFICATE/ QMS-APPROVAL/ ISV ORIGINATOR NB-RAIL SUB-GROUP STRATEGY SUBJECT RELATED TO DIRECTIVE 2008/57/EC (AS AMENDED BY 2009/131/EC, 2011/18/EU, 2010/713/EU, 2013/9/EU,
More informationEC CERTIFICATE PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE. No issued to. Ansell Protective Solutions Lithuania, UAB
PRODUCTION QUALITY ASSURANCE SYSTEM APPROVAL CERTIFICATE No. 46 02 01 issued to Ansell Protective Solutions Lithuania, UAB Pramonesg. 5 K, Tauragé, LT-72328, Lithuania We hereby certify that an examination
More informationCERTIFICATE AND MARK USAGE PROCEDURE
1 / 7 CERTIFICATE AND MARK USAGE PROCEDURE 1. Revision History Rev. No Date of Rev. Definition of Rev. Reason of Rev. 17 20.3.2018 General revision is made. Change of SZUTEST's logo. 16 7.8.2017 Updated
More informationLL-C (Certification) Services Overview
LL-C (Certification) Services Overview Who is LL-C (Certification)? LL-C (Certification) is an international certification body operating in more than 40 countries with experience in the field. Provides
More informationCERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS
Accredited product certification CERTIFICATION RULES - PORTABLE FIRE EXTINGUISHERS Revisions in this document: Rev. no. Date Description of revision 3 2015-08-25 4.8 Added information regarding certificate
More informationTechnical Report No for the conformity assessment according to the EMC Directive 2004/108/EC
Technical Report for the conformity assessment according to the EMC Directive 2004/108/EC, Article 7 and Annex III or respectively the EMC Law in the currently valid version Client: ABB Automation Products
More informationEC TYPE EXAMINATION (MODULE B) CERTIFICATE
HRVATSKI REGISTAR BRODOVA Croatian Register of Shipping EC TYPE EXAMINATION (MODULE B) CERTIFICATE THIS IS TO CERTIFY: That Croatian Register of Shipping did undertake the relevant type approval procedures
More informationWelding Certificate TÜV SÜD
Welding Certificate TÜV SÜD-00064.2013.004 in accordance with EN 1090-1, table B.1, its hereby declared: The manufacturer has produced evidence that he fulfills the requirements of the European standard
More informationUL TYPE EXAMINATION CERTIFICATE Low Voltage Directive 2014/35/EU
00-IC-F0468 Issue #: 6.0_LVD Page 1/14 Applicant Manufacturer Product Sample Description WAAREE ENERGIES LTD 602, Western Edge-I, Off. Western Express Highway, Borivali(E), Mumbai 400066, Maharashtra,
More informationDIGITALSIGN - CERTIFICADORA DIGITAL, SA.
DIGITALSIGN - CERTIFICADORA DIGITAL, SA. TIMESTAMP POLICY VERSION 1.1 21/12/2017 Page 1 / 18 VERSION HISTORY Date Edition n.º Content 10/04/2013 1.0 Initial drafting 21/12/2017 1.1 Revision AUTHORIZATIONS
More informationEVROTRUST TECHNOLOGIES AD
CERTIFICATE OF CONFORMITY The certification body LSTI declares EVROTRUST TECHNOLOGIES AD SIEGE : 2 NIKOLAI HAITOV STR., ENTR.D, FL.2 1113 SOFIA - BULGARIA Provides trust electronic services 1 that comply
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationEVROTRUST TECHNOLOGIES JSC
CERTIFICATE OF CONFORMITY The certification body LSTI declares EVROTRUST TECHNOLOGIES JSC HEADQUARTER: #101 TSARIGRADSKO SHAUSSE BLVD., BUSINESS CENTER ACTIVE, FLOOR 6, SOFIA 1113, REPUBLIC OF BULGARIA
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company SK ID Solutions AS Pärnu avenue 141 11314 Tallinn, Estonia to confirm that its trust service EID-SK
More informationContent of mandatory certificates
Chapter: 2.5.1 Conformity assessment procedures; General rules Text:... Key words: certificate, certificate of competence, 1. Purpose The purpose of this recommendation is to provide guidance on the minimum
More informationPRODUCT CERTIFICATION AND CONFORMITY ASSESSMENT SCHEME GENERAL PRINCIPLES
Page: 1/18 Developed by: Jakub Dering Approved by: Przemysław Gałka 1. GENERAL INFORMATION Product Certification Bureau (CW) is an independent organizational unit in the structure of the Polish Register
More informationdeclaration that the same application has not been submitted to any other registered body;
Short introduction Product certification can be requested by the manufacturer or the authorized agent of the manufacturer (importer) i.e. the applicant. Certification is carried out on the basis of a Module
More informationGUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000AS Revision No: 3 This is to certify: That the Peripheral Equipment with type designation(s) UniOP(TM) etop Series 500 and 600 Issued to Exor International
More informationBE INVEST INTERNATIONAL SA
CERTIFICATE OF CONFORMITY The certification body LSTI declares BE INVEST INTERNATIONAL SA HEADQUARTER: 117, ROUTE D'ARLON - 8009 STRASSEN - LUXEMBOURG Provides trust electronic services 1 that comply with
More informationInstallation Instructions
Installation Instructions (Cat. No. 1794-PS1) 1 2 3 4 5 7 6 Component Identification 1 Supply module 1794-PS1 2 Indicator 3 120/230V ac ground 4 120/230V ac common L2/N connections 5 120/230V ac power
More informationSolutions that ensure safety, reliability and compliance.
RED Transition and Implementation by TÜV SÜD Radu Gosav, Senior Manager EMC&RF, Greater China Solutions that ensure safety, reliability and compliance. TÜV SÜD Greater China Slide 1 17-02-22 1 RED Introduction
More informationCertificate. Certificate number: Certified by EY CertifyPoint since: July 10, 2018
Certificate Certificate number: 2018-016 Certified by EY CertifyPoint since: July 10, 2018 Based on certification examination in conformity with defined requirements in ISO/IEC 17065:2012 and ETSI EN 319
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationETSI TR V1.1.1 ( )
TR 119 400 V1.1.1 (2016-03) TECHNICAL REPORT Electronic Signatures and Infrastructures (ESI); Guidance on the use of standards for trust service providers supporting digital signatures and related services
More informationQUESTION / CLARIFICATION
QUESTION / CLARIFICATION CO-ORDINATION BETWEEN NOTIFIED BODIES DIRECTIVE 2008/57/EC AND SUBSEQUENT AMENDMENTS ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE UNION QC-INF-015 Issue 01 Date: 25/02/2015
More informationEC type-examination certificate UK/0126/0114 Revision 5
MI-008 EC type-examination certificate Revision 5 issued by NMO Notified Body Number 0126 In accordance with the requirements of Council Directive 2014/32/EU, this EU-type examination certificate has been
More informationCOMMITTEE FOR PROPRIETARY MEDICINAL PRODUCTS (CPMP) GUIDELINE ON REQUIREMENTS FOR PLASMA MASTER FILE (PMF) CERTIFICATION
The European Agency for the Evaluation of Medicinal Products Evaluation of Medicines for Human Use London, 26 February 2004 COMMITTEE FOR PROPRIETARY MEDICINAL PRODUCTS (CPMP) GUIDELINE ON REQUIREMENTS
More informationEC TYPE EXAMINATION (MODULE B) CERTIFICATE
HRVATSKI REGISTAR BRODOVA Croatian Register of Shipping EC TYPE EXAMINATION (MODULE B) CERTIFICATE No. 03-001577/031279 THIS IS TO CERTIFY: That Croatian Register of Shipping did undertake the relevant
More informationRead Me First for the HP ProCurve Wireless Products - software ver
Read Me First for the Wireless Products - software ver. 2.1.0 This Read Me First provides information for the following products: Wireless Access Point 520wl (J8133A) 802.11a AP Kit 160wl - N America +
More informationGUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION {A, M, PP, S, E, H, HLW, U, UM, U2, U3, PRT and T}
GUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION {A, M, PP, S, E, H, HLW, U, UM, U2, U3, PRT and T} The American Society of Mechanical Engineers Two Park Avenue
More informationNCS 8776 Certification scheme to NTA 8776
NCS 8776 Certification scheme to NTA 8776 RD_130, Issue 02 This guide describes the procedures and conditions for testing and certification used for conformity assessment within the NCS 8776 Certification
More informationEC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB00000A6 Revision No: 6 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its trust service D-TRUST qualified
More informationRequirements for the Certification of a Welding Quality Control Co-ordinator
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP- QCC-20-08 Requirements for the Certification of a Welding Quality Control Co-ordinator 2 nd Edition January 2011 Issued under the authority of the
More informationAbu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer
Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer Issue: 1.0 Date: 21/01/2018 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI
More informationCERTIFICATE of EU TYPE-APPROVAL
CERTIFICATE of EU TYPE-APPROVAL No. DK 0199.183 Revision 1 Boston / Vegas / California / Kansas NON-AUTOMATIC WEIGHING INSTRUMENT Issued by DELTA Danish Electronics, Light & Acoustics EU - Notified Body
More informationGuide for the application of the CR NOI TSI
European Railway Agency According to Framework Mandate C(2007)3371 final of 13/07/2007 Reference in ERA: ERA/GUI/07-2011/INT Version in ERA: 1.01 Date: 03 December 2013 Document prepared by Document type:
More informationDescription of the TÜV NORD CERT certification procedure GMP+ FC (Feed Certification scheme) of GMP+ International B.V. (NL)
Certific ation Table of contents 1 CERTIFICATION PROCEDURE... 3 1.1 Audit Preparation... 3 1.2 Establishment of readiness for certification... 3 1.3 Temporary approval... 3 1.4 Audit Stage 2 Certification
More informationCRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS
CRITERIA FOR CERTIFICATION BODY ACCREDITATION IN THE FIELD OF RISK BASED INSPECTION MANAGEMENT SYSTEMS Approved By: Executive: Accreditation: Mpho Phaloane Revised By: RBI STC Working Group Members Date
More informationTechnical Information
Date of last update: 10-08 Ref: Application Engineering Europe PRESSURE EQUIPMENT DIRECTIVE APPLIED TO COPELAND BRAND PRODUCTS The Pressure Equipment Directive (PED) affects compressors, condensing units
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000KD Revision No: 1 This is to certify: That the Electrical Measuring and Protection Relay with type designation(s) PPU-3, GPU-3 - Generator Controllers
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationType Approval Certificate
Type Approval Certificate This is to certify that the undernoted product(s) has/have been tested with satisfactory results in accordance with the relevant requirements of the Lloyd s Register Type Approval
More informationFIRE SAFETY GUIDELINES
FSG 1:2013 FIRE SAFETY AND SHELTER DEPARTMENT SINGAPORE CIVIL DEFENCE FORCE FIRE SAFETY GUIDELINES FSG 1:2013 CERTIFICATION OF REGULATED FIRE SAFETY PRODUCTS & MATERIALS (REVISED PROCEDURES) Effective
More informationEC Type-Approval Certificate
EC Type-Approval Certificate No. DK 0199.492 FT-10 / FT-10 Fill / FT-10 Flow NON-AUTOMATIC WEIGHING INSTRUMENT Issued by DELTA Danish Electronics, Light & Acoustics EU - Notified Body No. 0199 In accordance
More informationAMENDMENT TO THE COMPULSORY SPECIFICATION FOR SWITCHES FOR FIXED INSTALLATIONS (VC 8003)
610 National Regulator for Compulsory Specifications Act (5/2008): Amendment to the Compulsory Specification for switches for fixed installations (VC 8003) 39220 DEPARTMENT OF TRADE AND INDUSTRY STAATSKOERANT,
More informationPRODUCT CERTIFICATION SCHEME FOR MECHANICAL-CUSTOMIZED VEHICLES
Ref No: RACS/SOP/57 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Mechanical Customized
More informationEC Declaration of Conformity
P1000, P1100, P1200 LED Displays Generic Housed P7000 LED Displays Generic Main Boards EN 50121-4 :2006 +AC:2008 EN 61000-6-2 :2005 +AC:2005 EN 61000-6-4 :2007 +A1:2011 EN 61000-3-2 :2006 +A2:2009 EN 61000-3-3
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000001M This is to certify: That the Peripheral Equipment with type designation(s) RS900-24, RS900-HI, RS900G-24, RS900G-HI, RSG2100 Issued to Siemens Canada
More informationManufacturer certification in plant, metal and rolling-stock engineering
Manufacturer certification in plant, metal and rolling-stock engineering To ensure you meet the highest quality standards. TÜV SÜD Industrie Service GmbH Be prepared for going global In the course of globalisation,
More informationCertification Scheme
Certification Scheme Sustainable Biomass according to ISCC certification system (Edition: January 2017) DIN CERTCO Alboinstraße 56 12103 Berlin Tel: +49 30 7562-1131 Fax: +49 30 7562-1141 E-Mail: info@dincertco.de
More informationGDPR AMC SAAS AND HOSTED MODULES. UK version. AMC Consult A/S June 26, 2018 Version 1.10
GDPR AMC SAAS AND HOSTED MODULES UK version AMC Consult A/S June 26, 2018 Version 1.10 INDEX 1 Signatures...3 2 General...4 3 Definitions...5 4 Scoping...6 4.1 In scope...6 5 Responsibilities of the data
More informationKul Design Organisations. Kari Lumppio Desing Engineer, Head of Office of Airworthiness (acting) Atol Avion Oy
Design Organisations Desing Engineer, Head of Office of Airworthiness (acting) 2016 EASA design organisation approval (DOA) legal basis is EU legislation Regulations are legally binding, hard law European
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Asseco Data Systems S.A. Certum CA, ul. Bajeczna 13 71-838 Szczecin, Poland to confirm that its trust
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000016N This is to certify: That the Peripheral Equipment with type designation(s) JUMO mtron T Issued to JUMO GmbH & Co. KG Fulda Hessen, Germany is found
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company D-TRUST GmbH Kommandantenstraße 15 10969 Berlin, Germany to confirm that its trust service D-TRUST qualified
More informationMarks associated with TUV SUD BABT Certification Schemes
TUV SUD BABT is a certification body of TUV SUD BABT 2017 BABT_AP014.docx Page 1 of 11 Contents 1. Introduction... 3 2. Definitions... 3 3. Overview of Schemes and Associated Marks... 3 4. Accreditation
More informationPRODUCT CERTIFICATION SCHEME FOR METROLOGY SYSTEM
Ref No: RACS/PCS/20 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Metrology System
More informationUncertified Translation Physikalisch-Technische Bundesanstalt Braunschweig und Berlin (1) EC Type Examination Certificate (2) Equipment and Protective Systems Intended for Use in Potentially Explosive
More informationCERTIFICATE OF CONFORMITY. The certification body LSTI. declares ALEAT HEADQUARTER : SH.P.K RRUGA: XHANFIZE KEKO - TIRANA-ALBANIA
CERTIFICATE OF CONFORMITY The certification body LSTI declares ALEAT HEADQUARTER : SH.P.K RRUGA: XHANFIZE KEKO - TIRANA-ALBANIA Provides trust electronic services 1 that comply with Regulation (EU) No.
More informationMed-Info. Council Directive 93/42/EEC on medical devices. TÜV SÜD Product Service GmbH
Med-Info International expert information for the medical device industry Council Directive 93/42/E on medical devices Practice-oriented summary of the most important aspects and requirements contained
More informationCERTIFICATE OF CONFORMITY. The certification body LSTI. declares LUXTRUST SA IVY BUILDING L-8308 CAPELLEN - LUXEMBOURG
Conformity Assessment Body Trust Service Providers ISO 27001 LA ISO 27001 LI ISO 27001 RM ISO 27005 CERTIFICATE OF CONFORMITY The certification body LSTI declares LUXTRUST SA IVY BUILDING L-8308 CAPELLEN
More informationAccreditation Criteria For Conformity Assessment Bodies
Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2
More informationPEFC Certification System Netherlands - Certification Procedures
PCSN SCHEME DOCUMENT PCSN IV Issue 2 10-03-2017 PEFC Certification System Netherlands - Certification Procedures PEFC Netherlands Kokermolen 11 3994 DG Houten The Netherlands Tel: +31 30 693 0040 Fax:
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationHuber Engineered Materials ISO 9001:2008
Certificate US01/2693.00 The management system of Huber Engineered Materials 187 Gordon Street Fairmount, GA 30139, United States has been assessed and certified as meeting the requirements of ISO 9001:2008
More informationEXBO e-signing Automated for scanned invoices
EXBO e-signing Automated for scanned invoices Signature Policy Document OID: 0.3.2062.7.2.1.12.1.0 Approval Status: Approved Version: 1.0 Page #: 1 of 13 1. Introduction 1.1. Scope This document covers
More informationEC Certificate - Full Quality Assurance System Directive 93/42/EEC on Medical Devices, Annex II excluding Section 4
No. CE 516198 In respect of: The design and manufacture of sterile dental implants, dental abutments and related instrumentation. on the basis of our examination of the quality assurance system under the
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Microsec Ltd. Záhony utca 7. H-1031 Budapest, Hungary to confirm that its trust service e-szignó Qualified
More informationThe appendix to the certificate is part of the certificate and consists of 3 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company FNMT Real Casa de la Moneda C/Jorge Juan, 106 28009 Madrid, Spain to confirm that its trust service
More informationThe Accreditation and Verification Regulation - Verification report
EUROPEAN COMMISSION DIRECTORATE-GENERAL CLIMATE ACTION Directorate A - International and Climate Strategy CLIMA.A.3 - Monitoring, Reporting, Verification Guidance Document The Accreditation and Verification
More informationReport. Certificate M6A SIMATIC S7 Distributed Safety
Report to the Certificate M6A 17 05 67803 014 Safety-Related Programmable Systems SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision 3.1 dated
More informationThe IECEx Ticket to Global Markets
The IECEx Ticket to Global Markets Extract from the tutorial at PCIC Europe 2008 Rudolf Pommé KEMA Quality NL Karel Neleman BARTEC NL With special thanks to co-authors: Mario Colpa BACAB CH Frédérique
More informationCertification. Causes of Reduction of Scope of Certification
Certification Granting Maintaining Suspension Reduction of Scope Withdrawal Changes & Modification of Certification Causes of Reduction of Scope of Certification Issue of changed certificate Assessment
More informationIntroduction. Content. Training Course NAA Inspectors Training Course - Initial Airworthiness. Location(s) / Date(s) List price September 2019
Training Course NAA Inspectors Training Course - Initial Airworthiness Location(s) / Date(s) Hoofddorp, 11-13 February 2019 Netherlands 17-19 September 2019 List price 1290.00 Introduction EU Regulation
More informationCORPME- COLEGIO DE REGISTRADORES DE LA PROPIEDAD, MERCANTILES Y DE BIENES MUEBLES DE ESPAÑA
CERTIFICATE OF CONFORMITY The certification body LSTI declares CORPME- COLEGIO DE REGISTRADORES DE LA PROPIEDAD, MERCANTILES Y DE BIENES MUEBLES DE ESPAÑA SIEGE : DIEGO DE LEON, 21 28006 MADRID, SPAIN
More informationCERTIFICATE OF CONFORMITY. The certification body LSTI. declares BALTSTAMP HEADQUARTER : DARIAUS IR GIRENO STR. 40, LT VILNIUS - LITHUANIA
CERTIFICATE OF CONFORMITY The certification body LSTI declares BALTSTAMP HEADQUARTER : DARIAUS IR GIRENO STR. 40, LT-02189 VILNIUS - LITHUANIA Provides trust electronic services 1 that comply with Regulation
More informationOperating Instructions for Level Switch for Liquids. Model: RFS
Operating Instructions for Level Switch for Liquids Model: RFS 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Use in Hazardous
More informationMarks Associated with TUV SUD BABT Certification Schemes
Marks Associated with TUV SUD BABT Certification Schemes TUV SUD BABT is a Certification Body of TUV SUD BABT 2018 BABT AP014 Page 1 of 11 Contents 1. Introduction...3 2. Definitions...3 3. Overview of
More informationCybersecurity. Quality. security LED-Modul. basis. Comments by the electrical industry on the EU Cybersecurity Act. manufacturer s declaration
Statement Comments by the electrical industry on the EU Cybersecurity Act manufacturer s declaration industrial security Cybersecurity Quality basis security LED-Modul Statement P January 2018 German Electrical
More informationDATA PROCESSING TERMS
DATA PROCESSING TERMS Safetica Technologies s.r.o. These Data Processing Terms (hereinafter the Terms ) govern the rights and obligations between the Software User (hereinafter the User ) and Safetica
More informationBase Standard Program ISO Medical Device CB Application for Accreditation
Base Standard Program ISO 13485 Medical Device CB Application for Accreditation FA 5006 Authority: Accreditation Manager Effective: 2016/11/11 Section 1: CB Name, Contact Information, and Processing Fees
More informationIFY e-signing Automated for scanned invoices
IFY e-signing Automated for scanned invoices Signature Policy Document OID: 0.3.2062.7.2.1.13.1.0 Approval Status: Approved Version: 1.0 Page #: 1 of 13 1. Introduction 1.1. Scope This document covers
More informationSPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS
BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management
More informationAbu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard
Abu Dhabi Certification Scheme for Pool Lifeguard Assessment and Surveillance Plan for Pool Lifeguard Issue: 1.0 Date: 01/09/2015 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI QUALITY
More informationEUROPEAN STANDARD Electronic Signatures and Infrastructures (ESI); Time-stamping protocol and time-stamp token profiles
Final draft EN 319 422 V1.1.0 (2015-12) EUROPEAN STANDARD Electronic Signatures and Infrastructures (ESI); Time-stamping protocol and time-stamp token profiles 2 Final draft EN 319 422 V1.1.0 (2015-12)
More informationPOLICY FOR RENEWING A PRACTISING CERTIFICATE
POLICY FOR RENEWING A PRACTISING CERTIFICATE Policy for Renewing Practising Certificates Purpose To enable efficient, safe and consistent processing of renewal applications to the Occupational Therapy
More informationCERTIFICATE OF CONFORMITY. The certification body LSTI. declares UNIVERSIGN HEADQUARTER: 40 RUE DES ANCIENS ETANGS , FOREST BELGIQUE
CERTIFICATE OF CONFORMITY The certification body LSTI declares UNIVERSIGN HEADQUARTER: 40 RUE DES ANCIENS ETANGS - 1190, FOREST BELGIQUE Provides trust electronic services 1 that comply with Regulation
More information