LED WiFi Controller Hub AL

Transcription

1 WiFi Controller Hub Specifications & Instructions WiFi Controller Hub AL Works with: Receiver for Wireless Remote Controllers (AL ) or DMX Decoders (AL ) Controller -2818WIN Dimensions Brief introduction of s WiFi Controller Hub works with Receiver for Wireless Remote Controllers (AL sold separately) or DMX Decoders (AL sold separately) to provide WiFi control of Radialux and -W Tape Lights using a smart phone WiFi Hub offers not only powerful, dynamic control options, but also a convenient way to control lights by eliminating need for a separate remote control It is easy to use with included free smartphone app RF Frequency: 24G Compatible Mobile Devices: Apple ios, Android Includes 12V DC plug-in adapter (for powering hub itself) Max receivers per remote control: 20 Wiring diagram Method 1:Connect Indicators your cellphone with your home net router(wifi-rf) Power input Power input RF Receiver in 432 in in Indicator Lights: left (blue) = WiFi is transmitting middle (blue) = error right (red) = unit powered on R Using WiFi Hub with Wireless Receivers (AL ) Router Router (WiFi Hub connected to router via ernet cable - recommended) Method 2: Connect Method 2: your Connect cellphone your with cellphone with SR-2818WITR-N(B) SR-2818WITR-N(B) (WiFi -RF) (WiFi -RF) Power 12V input Power 5 5 ISO9001:2008 ISO9001:2008 r s receiver SR-1009FX series to be controlled by router ernet cable / RJ45 Operation 12V input 12V input 1Download application from app store or google play by sear dimension code 1 Connect Radialux tape light and Wireless Receiver according to instructions on Output Operation frequency Wireless Receiver specification sheet 2 RF Download Signal WiFi Controller 24G Hub application from Apple app store Andriod or Google Play Andriod by IOS IOS searching for "easy" or scanning a QR code (right) 3 Verify that your cell phone is connected to router / home network 4 Open WiFi Hub "easy" application and operate according to application manual Android ios 2If SR-2818WiN has connected WiN has with conne router, n connect your wwwalloycom / support@alloycom / S (5337) If SR-2818WiN did not connect with router, n connect your c Page 1 of 7 Specifications subject to change without notice v22 (Password: )

2 Powe Using WiFi Hub with Receiver for Wireless Remote Controllers (AL ) (WiFi Hub wirelessly connected to router) Router Method 2: Connect your cellphone with SR-2818WITR-N(B) (WiFi -RF) Powe 5 ISO9001: V input 1 Connect Radialux tape light and Wireless Receiver(s) according to instructions on Wireless Receiver specification sheet 2 Download WiFi Controller Hub application from Apple app store or Google Play by searching for "easy" or scanning a QR code (right) 3 Connect your cell phone to WFi Hub network directly (Password: ) 4 Open WiFi Hub "easy" application and operate according to application manual IOS Android ios WiN has conne er, n conne Safety & Warnings 1) product shall be installed and serviced by a qualified pe 2) IPlease avoid sun and rain When installed outdoor enclosure 3) Always be sure to mount unit in an area with proper vent 4) Please check if output voltage of any power supplie product 5) Never connect any cables while power is on and always ass before switching on 6) Please ensure that cable is secured tightly in connec 7) update information please consult your supplier Page 2 of 7 wwwalloycom / support@alloycom / S (5337) Specifications subject to change without notice

3 Using WiFi Hub with DMX Decoder (AL ) (WiFi Hub connected to router via ernet cable) CAT5 extension cable AL router RJ45 splice cable AL CAT5 extension cable AL GND D+ D- 1 Connect Radialux tape light(s) to DMX Decoder(s) according to instructions on DMX Decoder specification sheet Be sure to install decoders so y can be accessed later, digital interfaces be used to assign zones 2 Important: y need to connect via RJ45 cable back to modem from wifi hub 3 If using multiple decoders, wire according to diagram above 4 Set following addresses on digital interface of each decoder Each may have multiple decoders Decoders in same get same address Push first on each decoder for a few seconds until numbers blink n short each to set address As an example, let's suppose re are five s decoder in each get one of following addresses: Room #1: 001 Room #2: 005 Room #3: 009 Room #4: 013 Room #5: Download WiFi Controller Hub application from Apple app store or Google Play by searching for "easy" or scanning a QR code (see previous page) 6 Open app Go to app 'Setting' n click "Connect WiFi controller to your home network" Link to your home network 7 Go to 'Room' section of app In "Room" section, following are default s: Bed, Kitchen, Wash, Living Room, and Bath (Each of se s can be renamed after process of assigning a light to each is complete) To match order of decoders to to order of s in app, assign each decoder a in order: Bed, Kitchen, Wash, Living Room, Bath, etc 8 In 'Room' section, what labeled 'Bed' A green check mark appear 9 Go to 'Setting' section again Click box that says "Use direct Easy Lighting connection with WiFi controller" 10 Click 'Yes' when prompt appears: 'Your mobile phone is already connected to WiFi controller?' 11 Select desired on your 12 Go back to 'Room' section Uncheck Bed and check next Repeat steps 8, 9, and 10 Go through se steps one at a time To assign different s same, check those s before selecting on 13 Do not click 'Save', settings are automatically d and clicking "Save" again override your settings and y may be lost Page 3 of 7 wwwalloycom / support@alloycom / S (5337) Specifications subject to change without notice

4 WiFi Controller Hub EasyLighting Application Instructions Install App Download WiFi Controller Hub application from Apple app store ( app is called easy easylife by author Gong Fei) or Google Play by searching for easy Set Up WiFi Hub Hard-Wired Connection to Router (Recommended): To Connect Wirelessly to WiFi Controller: Connect WiFi Hub to your router using included CAT-5 (ernet) cable This allow you to operate controller on same network you use for Internet This operate controller on its own network and requires your mobile device to be disconnected from or wireless networks 1 Open easy application on your smart phone re be a message saying wireless device not found - click OK 2 Go to Settings 3 Select Connect WiFi controller to your home network 4 A dialog box saying Your mobile phone is already connected to WiFi controller? Select yes, app automatically search for router (P2) (P3) 5 Choose your router to connect 6 Enter WiFi network password and n OK (P3) (P4) 1 Open easy application on your smart phone re be a message saying wireless device not found - click OK 2 Go to Settings 3 Press Use direct EasyLighting connection to WiFi controller 4 Press yes (P2) Restore WiFi Settings to Factory Default Setting When we connect to WiFi Hub through an existing WiFi network, Easy not appear in list of available networks unless we reset router n we can use to restore WiFi controller to factory settings (This function is only used when connecting to an existing WiFi network) 1 Connect to existing WiFi network and make sure WiFi Hub is already configured to network 2 Go to Settings Configure 3 Select Restore WiFi settings to factory default settings (P6) 4 Press yes A dialog box indicate that it has successfully restored factory settings Press OK (P7) 5 After around 1 minute, Easy appear in network list again (P8) Easy application manual: P2 P1 P3 P4 Connect WiFi controller to your home network P5 P6 P7 P8 Restore WiFi settings to factory default setting Continued on next page 1)Search and connect Easy 2)Enter easy application 3)Short setting 4)Short 5)Press yes, it search all router around automatically(p2,p3) 6)Choose router we want connect 7)Enter password and n OKwwwAlloycom (P3P4) 1)Connect exist WIFI and make sure WIFI controller already be configure to network 2)Enter setting interface 3)Short / support@alloycom / S (5337) Page 4 of 7 Specifications subject to change3)press without notice yes; it indicate successful restore factory setting(p6) Use direct EasyLighting connection with WiFi controller ok, after around 1 minute, Easy can be found in network list again(p7p8)

5 controller P9 1)Search and connect Easy 2)Enter easy application 3)Short setting 5)Press yes (P2) ok, after around 1 minute, Easy can be found in network list again(p7p8) P9 P10 P10 P11 P11 P12 RoomRoom editing information editing information 1Short1Short setting setting 2Short2Short Edit Editinformation information re be page as(p9) re beediting editing page as(p9) a Edita /zone name name Edit /zone Edit Edit (P9) (P9) 2)Click2)Click words( bed for example) words( bed for example) 3)Clean old name enter new name zone for example) 3)Clean oldand name andaenter a new(name ( zone for example) (P11) (P11) P9 P11 P10 Room editing information Creating and Editing Rooms (Zones) 1Short setting 2Short Edit information b Change picture for for b Change picture Edit Edit (P9) (P9) 2)Short2)Short middle of middle of picture(p10) picture(p10) 3)Camera be opened automatically 3)Camera be opened automatically P12 P13 P14 4)Take4)Take a picture a picture 5)Click5)Click use photo use photo (P12) (P12) 6)Press 6)Press (P10) (P10) Go to Settings Press Edit Room Information and editing page appear (P9) re be editing page as(p9) c Editc for corresponding Edit for corresponding Edita name:name Change image a : Edit /zone Editfor be fourbe different Edit re re four different in in Edit (P9) (P9) 1 Press Edit 1lower Pressright Edit d Learning(P9) lower right 2)Click words( bed for example) for be explained in next chapter Manual mark for or s and keep 2 Select name for example) 22)Cancel Tap 2)Cancel image of a (P10) camera open automatically mark forthree or three s andone keep one 3)Clean old and( bed enter a new name ( zone for example) e backas takeasingle example) (P10) (P10) (P11) (picture take single as example) 3 Delete old name and enter a new name 3(Take After edit, click back to return setting interface 3)Press example) (P11) 43)Press Click use photo (P12) b( zone Changefor picture for Select WiFi controller(p13) zone re be onebe directly enter enter 4)Choose zone re one directly Edit (P9) (P11) 4 Press Save 54)Choose Press Save (P10) corresponding 2)Short middle of picture(p10) 1Use direct Easy corresponding connection with WiFi controller Under configure,only can select one controller 3)Camera be opened automatically 4)Take a picture Assign a for : 5)Click use photo (P12) 1 Press Edit 6)Press (P10) (P9) Four images appear c Edit for corresponding 2 Uncheck s that you don t want to Edit re be four different in lower rightleaving checked that you want select, 2)Cancel (P10) mark for or three s and keep one to select ( take single as example) (P10) 3 Press Save 3)Press 4)Choose zone re one directly enter 4 After editing, click beback to return corresponding to Settings W 2Connect WiFi controller to your home network Under configure, W CCT led / -W CCT (cool/warm white) W CCT led can select all or several pcs (cool/neutral/ WiFi setting(p14) warm white) single white single single 1Change password of WiFi controller SSID name controller Note: 2Change Different zones whichofare assigned different s cannot be commanded at same time Different zones which are assigned same, or are not assigned to any, can be selected at same time CCT led Select an controller (P13) single app directly to WiFi 1 When connecting Easy Hub, you can select only one controller at a time 2 When connecting Easy to WiFi Hub via a home network, you can select several controllers at a time WiFi Hub Settings (P14) 1 Change password of WiFi controller 2 Change SSID name of controller Learning (Pairing) First method: 1 Select any one re be green checkmark on upper right side 2 Press Room 3 Short learning key on Wireless Receiver 4 Touch in app lights blink to confirm designation Second method: 1 Enter Settings and select "Edit Room Information" 2 Press learning key on Wireless Receiver 3 Press Learning in application 4 n select zone/ after that lights flash to indicate successful pairing 5 Press Save To unlearn designation, learning key on Wireless Receiver for at least 5 seconds until lights flash, n learned ID is deleted Pairing with Remote Control: If you have a remote control that is compatible with Wireless Receiver, it can also be used for pairing "Easy" app follow zones established by remote example, if you set up zone 2 with remote, n you can use app to control zone 2 directly without pairing Page 5 of 7 wwwalloycom / support@alloycom / S (5337) Specifications subject to change without notice

6 successfully, multiple s can be at same time 4 Press again be confirm s selection 5 Upper area indicate s name we selected First way: 1)Selected any one and re be small mark on upper right side 2)Press 3)Press learning key on RF controllers SR-1009xx series 4)Touch, blink to confirm designation Delete Press at learning key on receiver(sr-1009fxx) over 5 seconds until light flash, n delete learned ID Controls & Features Room Second way: First way: 1)Selected any one and re be small mark upper right side P29 2)Press 3)Press learning key on RF controllers SR-1009xx b re be four different s we, can select if we did blink to confi 4)Touch not edit :,designation, CCT, Single 1)Slide upper areas from top to down to Delete from one to one (,) Press at learning key on receiver(sr-1009fxx) ove seconds until light flash, n delete learned I Learning ( combining) Second way: 1 Press Room 2 Short middle of a picture 3 A green checkmark at upper right corner of picture indicates it has been selected Multiple s can be at same time 4 Press Room again to confirm selection top of picture indicate name of selected First way: 1)Selected any one and re be small mark on upper right side Long middle of picture to turn on/off corresponding 2)Press s/zones re be a red off mark at upper right corner of 3)Press learning key on RF controllers SR-1009xx series d music() 4)Touch, blink to confirm picture when is switched off designation Wheel Learning (Color combining) & Pause Fastest Delete Press at learning key on receiver(sr-1009fxx) over 5 seconds until light flash, n delete learned ID Manual Second way: (P27,P28) a Room re are four different s you can select for a that has not been1 Choose Room -W When CCT,it 2 Short middle of zone picture open your edited: -W/,, CCT, and single Moving local music / highest,a low voice 3 Mark on upper right side of picture to indicate libe moving successfully, multiple s can be singleat same time lowest Scroll through s by swipinglowest upper again be confirm selection area of screen down ()4 Press s lowest,need a high 5 Upper area indicate s namevoice we selected moving Runn Fas Mov adju irst way: Or fast twice to enter selection interface to a Low )Selected any one and re be small mark on () pper right side )Press P29 )Press learning key on RF controllers SR-1009xx series b )Touch, blink to confirm c pause&run () re be four different s we can select if we did Run/Pause esignation exist in, y not edit :,, CCT, Single100% elete are similar so here take as an example to explain 1)Slide upper areas from top to down to ress at learning key on receiver(sr-1009fxx) over 5 c pause&run () Run/Pause () can be used in and s: from fol-one to one (,) econds until light flash, n delete learned ID exist in, interfa s lowing shows as an example are similar so here W take as an example to ex &level Pause Run/Pause econd way: Press Run/Pause to run a mode Press once to run first mode Press again to pause Press again to run next mode re are a total of 10 build-in modes If you select a on after pausing, mode return to first mode Long Run/Pause and lights flash twice to indicate that from Synchronized to -changing or from -changing to Synchronized running 1)Short Moving Adjust libe 100% Music () Fastest Fastest Lowest Slowest e / level line() running mode in different zones be switched This exist in / y are similar, so here take as an example to explain 2) level can be ed from to an accurate 1% e / level line() exist in / This y are sim here take as an example to explain d music() 1)Short Before by line, might in already in c pause&run () an existing, so we need zero clearing each first: 2) level can be ed exist in, y In Voice mode, change in response to a voice nearby louder & Pause moving each in any level between 1-225, n move it from to an accurate are similar so here take1% as an example to explain back to zero, n off which means zero voice, faster of mode return to ed when no voice is present Fastest Before by line, might in a an existing, so we need zero clearing each ch moving each in any level between 1-225, th P24 to a voice nearby h louder back to zero, n off which mean When,it Save (P24) Moving open your local music Long W ON/OFF voice, fasterto Wof mode return to highest,a low voice libe In it only s R,G and B three s your moving ed when nos voice W iswe present When youw mobile,and cannot need use music note key, 2)Select or moving modes f W () lowest This only exists in s to W 3)Short device s music player open Lowest lowest,need a high W 4)Long any of S1-S8 voice moving g () W to ON/OFF W inde 5) flash indicatelong successfully exist in, and CCT In it only s R,G and Move slider to left to increase microphone sensitivity, so that a quieter interface 2Recall voice,and cannot s W We need u down mode Lowerit s mic In slow and CCT allsensitivity s by moving slider to right to W e / line() 2)Short level This / y are similar, so 3)short exist din in S1-S8 g here take as an example to explain() 4) /indicate d (5337) or moving modes exist in, and CCT wwwalloycom / support@alloycom S interface 1)Short pause&run () Page 6 of 7 notice exist in, y Specifications subject to change without 2) level can be ed In and CCT it s all c 100% re similar so here take as an example to explain from to an accurate f W () This only exists in s interface to W In Music mode, change in response

7 2 Short middle of zone picture 3 Mark Moving on upper right side of picture to indicate be highest,a voicetime libe successfully, multiple s can low at same selection moving 4 Press again be confirm s lowest 5 Upper area indicate s name we selected Lowest When choo open your l lowes voice affec m and re be small mark on on RF controllers SR-1009xx series /White blink to confirm Slider () P29 b d music() re be four different s we can select if we did not edit :,, CCT, Single This can be used in() and s: following shows d music() c pause&run 1)Slide upper areas from top to down to & on receiver(sr-1009fxx) over 5 exist in, Pause as an example from y one to one (,) are similar so here take as an example to explain lash, n delete learned ID & Pause 100% 1 Short W Fastest 2 level can be ed from to an accurate Fastest W cha brightn Moving Note: Before ing using s may already highest,a low voice libe sliders, Moving move moving highest,a low voice be displaying an existing, so you need to clear each first: libe lowest moving Lowest slider in each to any level, n move it back to zero light lowest Lowest ing n turn off, which means s have been cleared successfully e / level line() This exist in / y are similar, so here take as an example to explain c pause&run () 1)Short exist in, y d music() c pause&runlevel () 2) can be ed are similar here take as an example to explain W so (White) () exist in, y from to an accurate are similar here take as an example to explain & so Pause This only exists in, when using in -W Before -W/ by line, might in already an existing, so we need zero clearing each tape light, to White Long first: W Fastest moving each in any level between 1-225, n move it turn Whiteback onn or off You must use to zero, off which means zerow to of W Moving highest,a low voice libe f W () interface moving to This only exists in s lowest LowestW Long W to ON/OFF W In it only s R,G and B three s,and cannot s W We need use W e / level line() to W This exist in / y are similar, so e / level line() here take asthis an example to explain exist in / y are similar, so g () here take exist as anin example to explain, and CCT 8) 1)Short interface 2) level can1)short be ed ) () from to an accurate and In CCT can be it s all s, ylevel 2) ed take as an examplefrom to explain to an accurate in -W/, Before by exists line, might in already in and CCT an existing, so we need zero clearing each Before of by line,first: might in already in s It s all s moving each an inexisting any level, between 1-225, it each first: so we needn zeromove clearing back to zero, n off which means zero moving each in any level between 1-225, n move it back to zero, n off which means zero f W () This only exists in s interface to f W () W This only exists in s interface to When,it open your local music When choo 1% bri open your l lowest,need a high voice moving lowest voice affec 100% 100% 100% b W W s level When,it open your local music 1% 1% 1% brig lowest,need a high h Save (P24) voice moving 1)Select s/zones 2)Select or moving modes 3)Short 4)Long any of S1-S8 5) flash indicate successfully 100% 2Recall 100% 2)Short 100% 3)short d in S1-S8 P 4) indicate d or moving modes W s 1% level 1% 1% P24 h Save (P24) Long W to W ON/OFF W h Save (P24) In Save/Recall it only s R,G and B three (P24) Long W to ON/OFF Ws or moving,and cannot s W We need use W 2)Select modes 1)Select s/zones In it only s R,G and B three s to W 3)Short,and cannot s W We need use W 2)Select or moving modes Save to W 4)Long any of S1-S8 ss level line() () 3)Short g B/ yaexist are similar, so and CCT 5) flash indicate 1 Select /zone in, 4)Long anysuccessfully of S1-S8 g () n example to explain interface 2Recall 5) flash indicate successfully 2 Select a or a -changing mode exist in, and CCT 1)Select n In and CCT interface 100% s/zones 2Recall it s all s 3 Short Save 2)Short e ed Inone from S1 ofand CCT s to S8 it s all s 3)short d in S1-S8 2)Short te 4 Long 4) indicate d or moving 5 flash to indicate setting has been d successfully 3)short d modes in S1-S8 r by line, might in already in 4) indicate d or moving modes e need zero clearing each first: in any levelrecall between 1-225, n move it 1% B off which means zero 1 Select a /zone 2 Short Save 3 Short one of s from S1 to S8 in s interface to 4 display d setting tness W chan brightn h Save (P24) to ON/OFF W erface,it only s R,G and B three s s W We need use W wwwalloycom 2)Select / Alloycom moving modes / S ghtness 3)Shortsubject without notice Page 7 of 7 Specifications to change 4)Long any of S1-S8 ) 5) flash indicate successfully t in, and CCT P24 (5337) P