MARQUE: SAMSUNG REFERENCE: AMPOULE BT GB8XH9009 CODIC:

Transcription

1 MARQUE: SAMSUNG REFERENCE: AMPOULE BT GB8XH9009 CODIC: NOTICE

2 Samsung Smart LED Lamp Application USER GUIDE

3 Application Contents. Overview. System Requirements. Application Flow.3 Basic Functions.4 Mode Functions.5 Advanced Functions.6 User Type. Smart LED Lamp Installation Guide. Installation by Administrator (First User). Installation by Additional Users 3. Loading 3. Password 3.3 Adding a Bulb 3.4 Deleting a Bulb 3.5 Adding a Lighting 3.6 Main Control - Group 3.7 Main Control - Lighting 3.8 Mode Control 3.9 Bulb List 3.0 Lighting List 3. Options - Timer 3. Options - Incoming call alert 3.3 Options - Shake to turn on 3.4 Settings - Group 3.5 Settings - Lighting 3.6 Settings - Bulb 3.7 Settings - Self repair 3.8 Settings - Password Check / Version Check 3.9 Exit

4 3. Overview.. System Requirements This app runs on Smartphones with Android 4.3 or higher and Bluetooth 4.0. To run the app, at least one Smart Bulb must be turned on. If more than one Bulb is turned on, the app automatically finds and connects to the Bulb with the strongest Received Signal Strength Intensity (RSSI). The Smart Bulb app only runs on Smartphones with the Samsung Smart LED Lamp app and cannot connect to other BLE (Bluetooth Low Energy, Bluetooth 4.0) devices.. Application Flow The basic app usage is as follows: Launch the app Search for Bulbs Connect to a Bulb Create and save the Bulb information Create and save the Lighting information Create and save the Group information Control the Bulb and Control through Advance Functions (Incoming Calls, Shake to turn on, Timer) Disconnect from the Bulb Exit the app..3 Basic Functions This app provides individual Bulb control, Lighting control, and Group control functions. A bulb refers to an individual lamp. Lighting refers to the lighting the Bulbs belong to. A Group refers to the space the lighting belongs to. For instance, a standing lighting (Lighting) in a living room (Group) may consist of one or more bulbs. A Bulb must be registered to a single Lighting; it cannot be registered to more than one Lighting. Multiple Bulbs can be registered to a Lighting and a Lighting can be registered to multiple Groups. You can add or delete Lightings from Groups using the Setting Lighting or Setting Group functions. You can register up to 64 Bulbs and up to 6 Lightings. For Groups, 5 basic groups are provided by default (All, Living Room, Bed Room, Kitchen and Bathroom) and users can create additional groups.

5 4. Overview.4 Mode Functions This app provides a Mode control function. A Mode saves the unique control settings for individual Lightings so that they can be controlled with a single click. It provides a kind of Scene control function. 5 basic Modes are provided and users can create 3 additional modes. Mode Color Temp. Brightness Functions Concentration Cool 00% Provides a high color temperature and brightness (to draw attention) Energy Neutral - 60% Provides a medium color temperature and brightness (for energy saving) Relax Warm 0% Provides a low color temperature and brightness (for rest) Sleep Current Status 0% Bulbs are turned off after 0 minutes (Timer function. The time is not configurable.) To cancel the Sleep operation, control the corresponding Lighting/Zone on the main screen. Daylight Variable Variable Varies the color temperature and brightness (between 06 to 7 o clock).5 Advanced Functions This app provides the following 3 advanced functions. ) Timer (Wake-UP) function You can turn on each individual Lighting at a specified time. You can set On/Off/Fade in/fade Out effects. The On/Off setting automatically provides a 3-minute Fade In/Out. ) Incoming call alert function This function causes the Lighting to blink in the Cool White color when the call arrives. 3) Shake to turn on function If you shake the mobile device after enabling this function, the Lighting is turned on in the Warm White color at 0% brightness.

6 5. Overview.6 User Type This app provides Administrator and Additional User modes so that multiple users can control the same Bulbs. ) Administrator This mode provides the highest authority to run all functions including those reserved for Administrators such as search for, add or delete a Bulb, allocate a Lighting, and control individual Bulbs. ) Additional Users This mode provides the authority to run functions other than those reserved for Administrators. Additional Users must use the password created by the Administrator. Additional Users can control Lightings and Groups by importing the Lightings created by the Administrator. Authority Administrator Additional Users Search/Add/Delete Bulbs Register Bulbs to Lightings Control Individual Bulbs Available Not Available Add/Control/Manage Lightings Add/Control/Manage Groups Timer (Wake - up) function Incoming Call function Shake to turn on function Self-Repair function Available Available

7 6. Smart LED LAMP Installation Guide. Installation by Administrator (First User) ) Turn the lighting where the Smart LED Lamp will be installed off and remove the existing bulb. ) Install the Smart LED Lamp in the lighting socket. 3) Connect to Google Play (Android App Market) on your Smartphone. 4) Type Samsung Smart LED Lamp in the search keyword input field to search for the app. 5) Move to the detailed description page of the found app and tap the Install button. 6) Turn the lighting on and run the Samsung Smart LED Lamp app. 7) Select Administrator and enter the password when the app runs. For the password, refer to Section 3. Password. 8) In the Add Bulb screen, add the Smart LED Lamp installed on the lighting to the app. Tap the [+Add] button to search for surrounding Smart LED Lamps (that are turned on). Press the [Find] button of a found lamp. The chosen lamp is registered to the app and blinks approximately 5 to 0 seconds. The registered Smart LED Lamps are automatically named in sequence. 9) Tap a registered Smart LED Lamp to configure the Lighting setting. 0) Register all the lamps to Lightings and tap the [<] button at the top. Although the app runs even if not all the lamps are registered to Lightings, you can only control unregistered Smart LED Lamps through [All Groups]. It is recommended registering all the lamps to Lightings. ) You can control registered Lightings using the Pallet window and the On/Off button.

8 7. Smart LED LAMP Installation Guide. Installation by Additional Users ) Connect to Google Play (Android App Market) on your Smartphone. ) Type Samsung Smart LED Lamp in the search keyword input field to search for the app. 3) Move to the detailed description page of the found app and tap the Install button. 4) Turn the lighting on and run the Samsung Smart LED Lamp app. 5) Select User and enter the password when the app runs. A user must enter the password set by the Administrator. For the password, refer to Section 3. Password. 6) Move to the Main Control screen, tap the [ ] button at the top right, and move to the Settings screen. 7) Select a Lighting from the Setting List and tap the [+Add] button to add the Lighting. The User must add the same number of Lightings as the Administrator. However, the User doesn t need to set them to the same names and types as the Administrator. For more information about registration, refer to Section 3.5 Lighting. 8) You can control registered Lightings using the Pallet window and the On/Off button.

9 8 The following describes the screen layout and usage when the app is launched for the first time. 3. Loading The Smart LED Lamp App provides Administrator and User modes. [] Yes : Supports all functions including the Bulb registration, management and control functions. [] No : Supports all functions except Bulb registration, management and control..6 User Types An Administrator has the authority to manage bulbs and control the overall settings when more than one user is using the Smart LED Lamps. An Additional User also can set and control Lightings and Groups by entering the password set by the Administrator.

10 9 3. Password The password is a unique number used by users to control bulbs from a Smartphone. Additional Users must enter the password specified by the administrator. [] Enter a password of 4~8 characters. [] Tap the Save button at the top of the screen. [3] Tap the OK button in the message box. [Note] Since the password cannot be changed, users must not lose or forget the password. [Note] Users can view the password set by the administrator by selecting Settings - Password from the menu. 3

11 0 3.3 Adding a Bulb (Administrators Only) [] Tap the +Add button on the Add Bulb page. The You have to move closer to the registered bulb. Art you ready to proceed now? message appears. [] Tap the OK button to search for nearby Smart Bulbs and view a list of found bulbs on the screen. [3] Tap the Cancel button to cancel the search. 3

12 [4] Found bulbs that are not registered are described as Unregistered Smart bulb. [5] Tap the Find button of the bulb to be registered. The selected bulb is registered to the app and blinks for a moment. [6] Registered bulbs are named Smart bulb # ( # refers to the sequential number) and enlisted. [7] Tap the Find button of a registered bulb to identify the registered Bulb by making it blink [8] To register a new Lighting, tap the +Add Lighting. [9] To register a bulb under the registered Lighting category, choose a Lighting from the list. [Note] Refer to the Section 3.5 for adding a lighting. 8 9

13 3.4 Deleting a Bulb (Administrators Only) [] Tap the Delete button on the Add Bulb page. [] Select the bulb to be deleted. [3] Tap the Delete button. 3 [Note] Once a Bulb is deleted, the bulb information is reset. You ll need to scan and register the bulb again on the Add Bulb page to use the Bulb again. If the Smartphone and the bulb to be deleted are too far away, the failure message will be displayed on the message box. After deleting a bulb, you need to turn the deleted bulb off and then on again.

14 3 3.5 Adding a Lighting (Administrators Only) [] Select a registered bulb on the bulb list page. [] If there is no registered Lighting, tap the +Add Lighting button. The Add Lighting page appears. [3] Select a Lighting Type. [4] Type a Lighting Name. [5] Select a Group for the Lighting. (5 basic groups are provided by default. Users can add up to more groups.) [Note] Even if a Group is not set for a Lighting, all Lightings can be controlled through [All Groups]. [6] Set the Incoming call alert service (optional feature) [7] Set the Shake to turn on service (optional feature) For more information about [6] and [7], refer to the descriptions about the options in Sections 3. and You can only add a Lighting using the Add Bulb function in Administrator mode. In User mode, you can search for a Lighting created by the Administrator by selecting Settings then using it. Lighting, adding it, and

15 4 [8] When the Lighting is added, you can view it on the Bulb page. [9] Select a Bulb for which a Lighting has not been added. [0] To register a bulb to a registered Lighting, select a Lighting from the list. To register a new Lighting, tap the +Add Lighting button. (Repeat from step [].) 8 9 0

16 5 3.6 Main Control [Group] [] The name of the currently selected Group. [The default setting is All Groups when the app runs.] [] The On/Off button for the currently selected Group. [3] The list of Lightings belongs to the currently selected group. [Note] If you tap on the Lighting, the Group settings page changes to the individual Lighting settings page. [4] The Group Settings button. [5] The pallet where you can control the currently selected group. [6] The color temperature/brightness selected on the pallet page. You can control all the Lightings allocated to the selected Group in one go through the pallet. [7], [8] and [9] below are descriptions about the Group settings page that shows when the [4] Group Settings button is selected. [7] Rename a Group (Users can rename used-added groups). [Note] You cannot rename the basic groups All, Living Room, Bed Room, Kitchen and Bathroom. [8] You can select a background image for the Group screen. Tap the + button to retrieve an image from the Gallery or take a picture. (You can save up to images including the basic images.) [9] You can choose Lightings to be registered to the Group

17 6 [0] To add a Group, select the Group popup icon. [] Select the Add button. [] Type a Group name. [3] Select a Background Image to be used for the Group screen. [4] Select a Lighting to be registered to the Group. [5] Select the Save button. [Note] When you add a Group, you must allocate at least one Lighting. Otherwise, the group will not be created. For information about deleting a Group, refer to Section [6] Select a registered Group. [7] Control the selected Group. 7 6

18 7 3.7 Main Control [Lighting] Select a Lighting in the Group settings screen to open the Lighting settings page. [] The name of the currently selected Lighting. [] Tap to return to the Group settings page. [3] The Lighting Type [4] The Lighting settings button [5] The pallet to control the currently selected Lighting. [6] The color temperature/brightness selected on the pallet page. You can control all the selected Lightings in one go through the pallet. If you select [4], the Lighting settings page appears. [7], [8] and [9] describe the Lighting settings screen that appears when the [4] Lighting settings button above is selected. [7] Change the Lighting Type [8] Rename the Lighting [9] Change the Group to which the Lighting belongs [0] Set Timer [] Start Timer [] Set Incoming call alert [3] Incoming call alert On/Off [4] Set Shake to turn on [5] Shake to turn on On/Off [Note] For more information about [0] ~[5], refer to the descriptions about options in Section 3., 3. and 3.3. To delete a registered Lighting, refer to Section

19 8 3.8 Mode Control [] Select the More icon on the settings page. [] Select a Mode. There are 5 basic modes provided: Concentration, Energy, Relax, Sleep and Day Light. (These cannot be deleted.) [3] Select the + Add button to add a user mode. [4] Type the Mode name. [5] Add the Lightings to be used in the Mode. [6] Select the Lightings whose color temperature and brightness are to be set. (Multiple Lightings can be chosen.) [7] Select the color temperature and brightness using the pallet. (The default values for the Mode are color temperature 700K and brightness 80%). [8] Confirm the settings through the pallet. [9] Select the Save button. [Note] If you did not set the color temperature/brightness for the Lightings when you set the Mode, there will be no change when the Mode is executed

20 9 [0] To delete a user-registered Mode, tap and hold the Mode icon. [] Tap the - icon to delete the Mode. [] Select the Done button to finish the deletion. 0 [3] To edit the user-registered Mode, select the Mode name. [4] Change the Mode name, Type or settings (color temperature/ brightness), and select the Save button. 4 3

21 0 3.9 Bulb List (Administrators Only) [] Select the More icon in the Control screen. [] Select the Bulb list. [3] Select a Bulb to control from the list and select On or Off. [Note] You can control each individual bulb in the Bulb list. (Administrators only, Users can t use this function.) 3

22 3.0 Lighting List [] Select the More icon in the Control screen. [] Select the list of Lightings. [3] Select a Lighting to control from the list and select On or Off. [Note] You can control each individual Lighting in the Bulb list. Both Administrators and Users can use this function. 3

23 3. Options-Timer [] Select the More icon in the Control screen. [] Select Options. [3] Select Wake-up (Timer). [4] When setting the Timer time, select Lighting name (ex. Stand). [5] When executing Timer option, select the clock icon. [6] Set the Timer time [7] Set the Type (On/Off/Fade In/Out). [8] When setting the Fade In/Out value, set the Duration for the Fade In/Out. [Note] For On/Off, a time of 3 minutes for the Fade In/Out is set by default

24 3 3. Options - Incoming call alert [] Select the More icon in the Control screen. [] Select Options. [3] Select Incoming call alert. [4] Select the Incoming call alert button(phone Icon) of a registered Lighting. 3 4

25 4 3.3 Options - Shake to turn on [] Select the More icon in the Control screen. [] Select Options. [3] Select Shake to turn on. [4] Select the Shake to turn on the Functions On/Off button of a registered Lighting. [Note] The Shake to turn on feature turns the Lighting on with a color temperature of 700K and a brightness of 0%. (There is no additional function for the setting.) For more information, refer to Section.5 Advanced Function. 4 3

26 5 3.4 Settings - Group [] Select the More icon in the Control screen. [] Select Settings. [3] Select Group. 3 [4] Select the Add button to add a new Group. [5] Select a Group from the list to change the settings of the Group. [6] Select the Delete button to open the Delete a Group page. [7] Select a Group to be deleted. [8] Delete the Group

27 6 3.5 Settings - Lighting [] Select the More icon in the Control screen. [] Select Settings. [3] Select Lighting. 3 [4] Select the Add button to add a new Lighting. [5] Select a Lighting from the list to change the settings of the Lighting. [6] Select the Delete button to open the Delete a Lighting page. [7] Select a Lighting. [8] Delete the Lighting

28 7 3.6 Settings - Bulb [Note] For information on how to use the Settings-Bulb menu, refer to the descriptions of Section 3.3 Adding a Bulb. 3.7 Settings- Self repair [] Select the More icon in the Control screen. [] Select Settings. [3] Select Self repair. [4] Press Self Repair button The Self repair warning message box pops up. Read the message and tap the OK button to confirm to run Self repair. [Note] The Self repair function is used when the Bulbs do not work or cannot be registered. Be sure to turn the Bulbs off except for the Bulbs to be reset before running the Self repair function. After running the Self repair function, you need to select Add Bulb/Delete and delete the Bulb. 3 4

29 8 3.8 Settings - Password check / Version Check [] Select the More icon in the Control screen. [] Select Settings. [3] Confirm the password. (It cannot be reconfigured.) [4] Check the version. 3 4

30 9 3.9 Exit [] To shut down application and bluetooth, choose Yes [] To exit application and use options(incoming call alert and Shake to turn on), choose No [Note] If you select Yes, you will be unavailable to use options(incoming call alert and Shake to turn on).