Network User s Guide Manual

Transcription

1 Network User s Guide Manual Yonsei International Campus (Campus Network / Dormitory Network) Written date: Written by: Snetsystems 1

2 Contents 1. Wireless Local Area Network 1) Windows Series -Window 7 -Window 10 1) Mac OS Series 2) Android Series 3) Other 2. Wired Local Area Network 1) Windows Series 2) Mac OS Series 3. Checklist for Occurrence of Error 1) Check indication of Windows tray icon 2) Check physical connection 2

3 1. Wireless Local Area Network 1) Windows 7 Step 1. Click on the Network shortcut icon on the taskbar located on the bottom right corner. Step 2. Select Yonsei_info. Step 3. Run Internet Explorer when the connection is complete. 3

4 1. Wireless Local Area Network 1) Windows 7 Step 4. If you do not see the image above on Internet Explorer, enter the web address (for dormitory network) or (for the all-campus network). Step 5. Once you see the above image, select Agent, then download and install (refer to the Manual on the left side of Agent for installation instructions.) 4

5 1. Wireless Local Area Network 1) Windows 7 Step 6. After you have installed Agent run Yonsei_Wireless.wcf from the desktop shortcut. Step 7. Enter in your username and password (Yonsei portal ID) 5

6 1. Wireless Local Area Network 1) Windows 7 Step 8. You can use your internet when a window pops up affirming your internet connection. Please Note: On the AnyClick connection information window, the proper IP addresses for the dormitory and campus are as follows: X.X and X.X respectively. 6

7 1. Wireless Local Area Network 1) Windows 10 (windows defender off) Window 10 users must turn off window defender and end V3 programs before installation. Step 1. Right click the windows icon on the bottom left corner. Step 2. Navigate to Control Panel 7

8 1. Wireless Local Area Network 1) Windows 10 (windows defender off) Step 1. View by Category Click on Small Icons 8

9 1. Wireless Local Area Network 1) Windows 10 (windows defender off) Step 1. Select Windows Defender 9

10 1. Wireless Local Area Network 1) Windows 10 (windows defender off) Step 1. Select Settings 10

11 1. Wireless Local Area Network 1) Windows 10 (windows defender off) Step 1. Endpoint Protection Turn Off 11

12 1. Wireless Local Area Network 1) Windows 10 (windows defender off) Step 1. Wireless LAN Connect to Yonsei_info 12

13 1. Wireless Local Area Network 1) Windows 10 Step 1. You will be navigated to the above screen when you run Explorer. If your screen does not automatically redirect to the screen above, type into the address bar for access. Step 2. Click on the boxed option above. 13

14 1. Wireless Local Area Network 1) Windows 10 Step 1. Click on the appropriate Agent for download. 14

15 1. Wireless Local Area Network 1) Windows 10 Step 1. Download and install program. 15

16 1. Wireless Local Area Network 1) Windows 10 Step 1. After installation double click on Yonsei_Wireless icon from desktop. Step 2. Access through your Portal log-in ID and password. (For non-faculty and non-students, enter the alphabet of your user ID in all capital letters!) Step 3. After logging in, the ID/PW will automatically disappear. Click on connection information. 16

17 1. Wireless Local Area Network 1 2) Mac OS Series - This manual is based on the OS X system, and there might be discrepancy among different versions. Step 1. Click on the Apple icon on the top left corner and click About to check your operating system. Step 2. Check your OS X version. 17

18 1. Wireless Local Area Network 1 2) Mac OS Series - This manual is based on the OS X system, and there might be discrepancy among different versions. Step 3. After clicking on the network icon on the top right corner, select Yonsei. Step 4. Enter username and password (synced with your Yonsei Portal account) 18

19 1. Wireless Local Area Network 1 2) Mac OS series - This manual is based on the OS X system, and there might be discrepancy among different versions. Step 5. After entering your ID/PW, click Trust option on the Authentication page that will pop up. If this window does not appear, retry after relocating to a more secure wireless connection area. 19

20 1. Wireless Local Area Network 1 3) Android Series - There might be some discrepancy depending on your type of mobile. Step 1. Access Settings and click on Wireless & Network. Step 2. On the Wi-Fi settings menu, click on Yonsei for several seconds to be navigated to Advanced Settings Step 3. Encoding and authentication will be executed through PEAP/GTC method, and your account information will be the same as your Yonsei Portal information. Please note: Use after updating your mobile firmware to the most recent version. 20

21 1. Wireless Local Area Network 1 4) Other - Some models of Atheros LAN cards may not operate normally. You must update your wireless LAN card driver to the most recent version. You must manually update instead of relying on the automatic update. The Atheros models HB92/HB97 must have a driver version of or above. Atheros HB95 must have a driver version of or above. 21

22 2. Wired Local Area Network 2 1) Windows 7 Step 1. Click on Category from the View by drop-down bar on the Control Panel and select Network and Internet Step 2. Click on Network and Sharing Center 22

23 2. Wired Local Area Network 2 1) Windows 7 Step 3. Click Change adapter settings Step 4. Right click Local Area Connection (or ethernet) and click Properties. 23

24 2. Wired Local Area Network 2 1) Windows 7 Step 5. Double click TCP/IPv4. Step 6. Click OK after entering IP address and DNS server address. (IP address: located on a yellow sticker posted on each desk of every room) 24

25 2. Wired Local Area Network 2 1) Windows 7 Step 7. Close the Local Area Connection(or ethernet) Properties window by clicking OK. (Finish) Precautions: Of the different ports on the LAN port, the internet port is on the bottom. You must physically connect the UTP cable (LAN cable) to the PC (not the port on top of your desk) If you choose to use a hub, you need 2 LAN cables for one PC and 3 LAN cables for 2 PC s. Use of personal wired or wireless routers is prohibited!!! 25

26 2. Wired Local Area Network 2 1) Windows 10 Step 1. Right click on the tray icon located on the bottom right corner of your windows screen. 26

27 2. Wired Local Area Network 2 1) Windows 10 Step 1. Click on Network and Sharing Center. 27

28 2. Wired Local Area Network 2 1) Windows 10 Step 1. Click Change Adapter Settings 28

29 2. Wired Local Area Network 2 1) Windows 10 Step 1. Right click on the Wired Network icon with a LAN cable graphic shown in the image above. 29

30 2. Wired Local Area Network 2 1) Windows 10 Step 1. Click on Properties. 30

31 2. Wired Local Area Network 2 1) Windows 10 Step 1. Select Internet Protocal version 4(TCP/IPv4). 31

32 2. Wired Local Area Network 2 1) Windows 10 Step 1. Manually enter the IP address. 32

33 2. Wired Local Area Network 2 2) Mac OS series - This manual is based on the OS X system, and there might be discrepancy among different versions. Step 1. Click on the Network icon on the top right corner. Step 2. Click on Open Network Settings. Step 3. After selecting on the left ethernet option, select Manual from the drop down bar on the right window. Step 4. Enter the IP address, subnet mask, and router (gateway) information (can be found posted on a yellow sticker underneath your desk) Step 5. Click Advanced in order to enter DNS information. 33

34 2. Wired Local Area Network 2-2) Mac OS series - This manual is based on the OS X system, and there might be discrepancy depending on different versions. Step 6. Select the DNS tab. Step 7. Enter DNS information using the plus (+) menu. Step 9 Apply. (Finish) Step 8. Agree. Precautions: Of the different ports on the LAN port, the internet port is on the bottom. You must physically connect the UTP cable (LAN cable) to the PC (not the port on top of your desk) If you choose to use a hub, you need 2 LAN cables for one PC and 3 LAN cables for 2 PC s. Use of personal wired or wireless routers is prohibited!!! 34

35 3. Checklist for occurrence of error 1) Check indication of your Windows tray icon <wired LAN> Step 1. Check IP settings. (You must set your PC on wired network adapter) Step 2. Disconnect your LAN cable and reconnect. <wireless LAN> Step 1. IP It should not be installed. Please receive automatic IP address. Step 2. There is no internet access through Yonsei_Info. (only to be used to download Agent ) *. In Dormitory2 of YIC, the IP number of assigned room is indicated on the router. (ex. For a triple room x.1,1.233.x.2, x.3 the assigned IP number for a student would be x.1) For students whose desks have a router, it is unnecessary to install a discrete wired network adapter IP. Instead, use a remaining port on the router for convenience. 35

36 3. Checklist for occurrence of error 2) Check physical connection Step 1. Check the LAN cable and laptop connection. Please repair and replace any unstable LAN cables and check its attachment to the port. Step 2. Please make sure cable is connected through the bottom port of the wall. (inapplicable to desk ports) Connect to bottom! 36

37 3. Checklist for occurrence of error 2) Check physical connection Step 3. check your IP number inside your room. 37

38 3. Checklist for occurrence of error 2) Check physical connection Step 4. Check for full and proper connection of cables to router. Check the globe image LED Insert LAN cable connected to the wall port here! The name of your wireless router is comprised of your building number + room number ex) G 439 Do not reset your router! 38