Methodist University. Wireless Connectivity Guide. Version 1.2

Size: px

Start display at page:

Download "Methodist University. Wireless Connectivity Guide. Version 1.2"

Hope Watkins
5 years ago
Views:

1 Methodist University Wireless Connectivity Guide Version 1.2

2 Getting Started... 3 Available SSID s... 4 Unsecured Connectivity... 4 Methodist University... 4 MU_Guest... 4 MU_Devices... 4 Secured Connectivity... 5 MU... 5 MU_Net... 5 MU_Onboard... 5 Guest Connections... 6 (MU_Guest)... 6 Onboarding Devices... 8 (MU_Onboard -> MU)... 8 Internal Devices (MU_Net) Manage / Add additional Devices (MU_Devices) Additional Assistance Locating the MAC address Forget connected wireless network Requesting IT support assistance... 40!2

3 Getting Started First, read through the SSID (service set identifier) section in order to identify which of the available wireless networks you should connect to. Then proceed to the step-by-step instructions for connecting your device to the appropriate Methodist University wireless network.!3

4 Available SSID s SSID means Service Set Identifier, which is a 32-character sequence that uniquely identifies a wireless LAN (WLAN). In other words, the SSID is the name of the wireless network that is advertised from the wireless access point, which is, in turn, available to be connected to from a wireless device. Read the following SSID options carefully in order to understand which one is applicable to your needs as either a faculty, staff, or student MU network user along with the requirements of the device that you are wanting to connect to the MU network. Unsecured Connectivity Methodist University The Methodist University SSID provides unsecured and unauthenticated wireless access. Please note that this SSID option will no longer be available after the middle of December Therefore, faculty, staff, and students should begin using one of the other connectivity options listed below in order to prevent a disruption in wireless connectivity. MU_Guest The MU_Guest SSID provides unsecured and unauthenticated wireless access for guests who are visitors to the Methodist University campus. This network provides access to Internet resources only, and it has bandwidth speed restrictions. MU_Devices The MU_Devices SSID provides unsecured and unauthenticated wireless access for devices that are unable to perform the onboarding process. This option pertains only to the video gaming consoles and televisions in the student dormitories.!4

5 Secured Connectivity MU The MU SSID provides secure and authenticated wireless access for Bring Your Own Devices or BYOD. This network is to be used by all faculty, staff, and students who wish to connect their personal devices to the MU wireless network. Devices connecting to this SSID will need to go through the onboarding process in order to connect. Follow the onboarding devices section instructions to connect your device. MU_Net The MU_Net SSID provides secure and authenticated wireless access for MU owned wireless PC computers. In order for Mac computers, TV s, and other MU owned devices to connect, it will require the assistance of the IT department. Refer to Requesting IT support assistance at the end of this document. MU_Onboard The MU_Onboard SSID provides a temporary wireless connection to perform the onboarding process for devices.!5

6 Guest Connections (MU_Guest) Android & ios 1. Connect to the MU_Guest SSID. Android ios 2. Click Connect.!6

3. Open a web browser, if not automatically redirected to the Guest Portal page, then connect to http://www.methodist.edu to be redirected to the portal. 4.

7 3. Open a web browser, if not automatically redirected to the Guest Portal page, then connect to to be redirected to the portal. 4. Read the Acceptable Use Policy; then click Accept. 5. Upon being redirected to the Methodist University website, you will be connected to the MU_Guest network.!7

Onboarding Devices (MU_Onboard -> MU) ios Note: If connected to a Methodist University SSID, then disconnect and forget the connection (refer to the bottom of p.

8 Onboarding Devices (MU_Onboard -> MU) ios Note: If connected to a Methodist University SSID, then disconnect and forget the connection (refer to the bottom of p ) before continuing. 1. Connect to the MU_Onboard SSID 2. Open Safari and open the following URL: 3. Enter your username and password. (exclude

9 4. Click Sign On. 5. Click Start. 6. Enter a unique Device Name to identify and manage this device later; then click Continue.!9

10 7. Click Launch Apple Profile and Certificate Installers Now. 8. If you are presented with This website is trying to open Settings to show you a configuration profile. Do you want to allow this? Click Allow. 9. Click Install to install the temporary certificate, then enter your passcode if you have device locking enabled.!10

11 10. Click Install to install the MU wireless certificate. You will be prompted with another install button, click Install again. 11. Enter your MU password and press Next.!11

12 12. Click Done once the install process finishes. 14. Disconnect from MU_Onboard and forget the network (refer to the bottom of p. 39). The device will automatically connect to the MU SSID.!12

Android Note: If connected to a Methodist University SSID, then disconnect and forget the connection (refer to the bottom of p. 39-40) before continuing. 1. Connect to the MU_Onboard SSID 2.

13 Android Note: If connected to a Methodist University SSID, then disconnect and forget the connection (refer to the bottom of p ) before continuing. 1. Connect to the MU_Onboard SSID 2. Open Chrome and open the following URL: if not automatically redirected to the Onboarding/Portal web page. 3. Enter your username and password. (exclude then click Sign On!13

14 4. Click Start. 5. Enter a unique Device Name to identify and manage this device later then click Continue.!14

15 6. Click Get Cisco Network Setup Assistant Now. 7. On the Complete action using screen, tap Play Store, then click Just once.!15

8. If already authenticated to the Google Play Store, then proceed to step #10. If not, then you will be prompted to connect with either a new or existing Google account.

16 8. If already authenticated to the Google Play Store, then proceed to step #10. If not, then you will be prompted to connect with either a new or existing Google account. Choose the option that is applicable to you. 9. Authenticate to the Google Play store using your Google username and password. 10. Click Cisco Network Setup Assistant.!16

17 11. Click Install. 12. Click Accept for permissions.!17

18 13. Click Open 14 Click Start within the Network Setup Assistant Application!18

19 15. Download profile - click Proceed 16. Enter the Network Password associated with your MU account and click OK.!19

20 17. Click Exit to close the Network Setup Assistant. 18. Check the Wi-Fi connection to verify that your now connected to MU SSID. 19. You are now connected to the secure MU SSID.!20

21 PC Note: If connected to a Methodist University SSID, then disconnect and forget the connection (refer to the bottom of p. 39) before continuing. 1. Click the wireless icon on the task bar (#1), then click (#2) MU_Onboard to connect to the on boarding network.!21

22 2. Click Connect. 3. After connecting to the network, a web browser will open to the Onboarding Portal web page. Enter your username and password. (exclude then click Sign On.!22

23 4. Click Start. 5. Enter a unique Device Name to identify and manage this device later, then click Continue.!23

24 6. Click Save to download the Network Setup Assistant. 7. Click Run to install the Cisco Network Setup Assistant.!24

25 8. Click Start. 9. Enter the password to your MU account, then click Ok.!25

26 10. Click Yes to accept the root certificate. 11. Wait while the configuration is being applied to your computer.!26

27 12. Click Exit. 13. Check the Wi-Fi connection to verify that you are now connected to MU SSID. 14. You are now connected to the secure MU SSID.!27

MacBook Note: If connected to a Methodist University SSID, then disconnect and forget the connection (refer to the bottom of p. 39-40) before continuing. 1.

28 MacBook Note: If connected to a Methodist University SSID, then disconnect and forget the connection (refer to the bottom of p ) before continuing. 1. Click the wireless icon on the task bar (#1), then click (#2) MU_Onboard to connect to the onboarding network. 2. Open Safari and open the following URL: 3. Enter your username and password. (exclude 4. Click Sign On.!28

29 5. Click Start. 6. Enter a unique Device Name to identify and manage this device later, then click Continue.!29

30 7. Wait for the Cisco Network Setup Assistant to download. 8. Click Download on the dock, then click cisco_network_setup_assistant.dmg to mount the file. 9. Click Cisco Network Setup Assistant.!30

31 10. Click Open. 11. Click Start.!31

32 12. Click Continue to install the certificate. 13. Authenticate using your local MacBook account. 14. Click Exit.'!32

33 13. Check the Wi-Fi connection to verify that your now connected to MU SSID. 14. You are now connected to the secure MU SSID.!33

34 Internal Devices (MU_Net) 1. Click the wireless icon on the task bar. 2. Click the MU_Net SSID then click Connect.!34

35 3. The MU_Net SSID will now connected.!35

Manage / Add additional Devices (MU_Devices) While the majority of devices connecting to the MU SSID can be onboard, we understand that certain devices are not capable of performing the onboarding

36 Manage / Add additional Devices (MU_Devices) While the majority of devices connecting to the MU SSID can be onboard, we understand that certain devices are not capable of performing the onboarding process. These devices are typically things like gaming consoles, televisions, and other devices outside of the standard computer or mobile device. These devices can still be connected to the MU SSID, but the following process must be completed instead of the onboarding process. This process is not to be used for MU owned devices, but for BYOD devices only. The MyDevices Portal allows a user to add up to five devices to his/her account by using the devices media access control address (MAC address). The MAC address is a unique identifier assigned to network interfaces for communication on a network segment. Refer to the Additional Assistance section for more information on locating the MAC address of a device. 1. Access the MyDevices Portal at the following URL:

37 2. Enter your Methodist University username and password, then click Sign On. 3. Read the Acceptable Use Policy the click Accept. 4. On the Post Access screen, click Continue.!37

Enter the device name, device ID, and optional description, then click Submit.

38 5. The Manage Devices screen allows one to view, delete, and add devices. To add a device click the Add button. 6. Enter the device name, device ID, and optional description, then click Submit. Device name: A unique name to allow easy identification of the device Device ID: The device s MAC address in the following format: Ex. 22:22:22:22:22:22 Description: Optional but recommended to assist with device identification.!38

39 Additional Assistance Locating the MAC address Android 1. On the Home screen, tap the Menu key and go to settings. 2. Scroll down and tap About Tablet then tap Status. ios 1. On the Home screen, tap the Settings app. 2. Scroll down and tap General then tap About. PC 1. Click the Start menu. 2. Type ncpa.cpl into the search box and press enter. 3. Right-click your Wi-Fi adapter and select Status. 4. Click Details and the Physical Address is your MAC address. MacOS 1. On the dock click System Preferences. 2. Click on Network then select Wi-Fi. 3. Click Advanced (The Wi-Fi Address is the MAC address). Other Devices Reference the device documentation for assistance with locating the MAC address. Forget connected wireless network Android 1. On the Home screen, tap the Menu key and go to settings. 2. Click Wi-Fi under connections. 3. Click the connected Wi-Fi network. 4. Click Forget.!39

40 ios 1. On the Home screen, tap the Settings app. 2. Click Wi-Fi. 3. Click on the connected SSID, then click Forget This Network. PC 1. Click the wireless icon on the task bar. 2. Click on the connected SSID. MacOS 1. On the dock click System Preferences. 2. Click Network. 3. Click Wi-Fi then click Advanced. 4. Click the network and then click the minus button. Other Devices Reference the device documentation for assistance with forgetting the wireless network connection. Requesting IT support assistance If you require additional assistance or you have questions about connecting your devices to the MU network, please be sure to have your MAC address, type of device, and the SSID that you are trying to connect to available, and call x7300 (students) or submit a support request (faculty/staff).!40

Methodist University. Wireless Connectivity Guide. Version 1.5.0

Methodist University. Wireless Connectivity Guide. Version 1.5.0 Methodist University Wireless Connectivity Guide Version 1.5.0 Guide Updates... 3 Getting Started... 4 Available SSID s... 5 Unsecured Connectivity... 5 Methodist University... 5 MU_Guest... 5 MU_Devices...