1 Quad BRI GSM Gateway with 8 GSM Ports HG-2000/3U Cost Saving Customer Premises Equipment with Carrier Grade Performance Product Description November 2009 Contents Next Page
2 Hypermedia HG-2000/3U 3 Contents ABSTRACT... 5 Savings and Benefits... 6 System Components... 6 HG-2000/3U Unit... 6 Boards... 7 HyperGateway Server... 7 Hypermedia Management Console... 7 D-LINK DIR-100 (Optional)... 7 Hypermedia Management Console (HMC)... 8 ISDN (BRI) FEATURES & FUNCTIONALITY... 9 Connections and Settings BRI Connections: Cellular and VoIP BRI Settings Functionality Highlights Dial Filters BRI Card Dial Plan GSM FEATURES AND FUNCTIONALITY GSM Overview Connections and Settings GSM Connections: VoIP and/or ISDN GSM Settings Functionality Highlights Dial Filters PIN Codes Locks Additional Functions LCR FEATURES AND FUNCTIONALITY Connections and Settings LCR Links: VoIP and/or GSM and/or ISDN Advantages of Grouping Resources Functionality Highlights LCR Rules Time Frames Filters Number Filters Advanced Call Routing (ACR)... 19
3 Hypermedia HG-2000/3U 4 MONITORING AND MANAGEMENT Monitoring via the HMC Monitoring Board (Card) Usage Monitoring CDRs The Console Suite Management via the HMC Managing Users Managing VPN Groups Managing Number Filters Managing Tasks with the Scheduler Managing Global Parameters Managing Cause Code Hypermedia Gateway Server List ADD-ON PACKAGES HyperSavings Package DISA/Call Through Corporate Call Back... 27
4 Hypermedia HG-2000/3U 5 Chapter 1 Abstract The Hypermedia HG-2000/3U BRI GSM Gateway series is part of the HyperGateway family of flexible, scalable platforms which empower cost-effective corporate telephony over fixed, cellular and IP networks. Hypermedia Gateways provide integrated voice communications for both on-site and remote users of small-to-large enterprises. The HG-2000/3U is designed specifically as a PBX addon solution for GSM connectivity. It makes use of the existing BRI interface of the PBX/IP-PBX and connects directly to the phone system via a dedicated BRI port. In addition, it can provide a trunk connection into the PSTN. This paper illustrates how HG-2000/3U can be integrated into an existing telephony environment. It describes the features and potential benefits of deployment of an HG- 2000/3U.
5 Hypermedia HG-2000/3U 6 Savings and Benefits System Components The HG-2000/3U Quad BRI-GSM gateway provides seamless interoperability between the existing phone system and the GSM mobile network. It enables bi-directional routing of fixed landline calls directly to and from the GSM network. The HG-2000/3U is a single unit with centralized management for multiple BRI interfaces. It supports up to 8 concurrent cellular calls. Support for VoIP can easily be added. By using the HG-2000/3U, companies can significantly reduce their telephony costs. Savings are the result of: The HG-2000/3U unit consists of the components described in this section. HG-2000/3U Unit The HG-2000/3U unit is a 19" x 3U rack-mountable box that connects the PBX to the cellular network via one or two cellular boards (CG boards), each with 4 ports for up to a total of 8 SIM cards. The system enables any combination of connectivity between its various interfaces. direct routing of an incoming call to a specific channel which contains a SIM card from a pre-defined provider forwarding calls to pre-designated extensions CG Boards MG Board eliminating the cost of international calls placed from mobile phones 3U eliminating roaming tariffs Additional benefits of installing the HG-2000/3U include: preserving and upgrading the telephony network familiar calling patterns mean succesful integration, increased usage, and increased savings QBRI Board Power Supply Figure 1: Board Location in the HG-2000/3U Unit
6 Hypermedia HG-2000/3U 7 Boards HyperGateway Server Following is a description of the boards included with the unit: QBRI Board The QBRI boards are single-slot cards that enable signaling over a BRI channel on public or private ISDN. The HyperGateway Server runs on the single QBRI board. CG41/CC41 Cellular Gateway CG41 for GSM and CC41 for CDMA is a single-slot card that enables inbound and outbound cellular voice calls for GSM and CDMA networks. MG-1.1/1.2 Media Matrix and Media Gateway The MG-1.1/1.2- Media Matrix is a single-slot card that enables flexible, pre-defined, and dynamic allocation of GSM channels, BRI B-channels, and, optionally, VoIP channels. It comes in two configurations: The basic Matrix slot board VoIP Gateway add-on supporting the VoIP interface and capable of carrying concurrent VoIP calls. The HyperGateway Server is an application that is embedded in the Control Board, the QBRI board, the PRI 2.1 board, and on the PC1/2 board. The HyperGateway Server is controlled and managed by the browser-based Hypermedia Management Console. Hypermedia Management Console The Hypermedia Management Console (HMC) is used by the system administrator for remote configuration and monitoring of the Hypermedia Gateway system. It runs over TCP/IP and is accessed via a standard WEB browser. D-LINK DIR-100 (Optional) The D-LINK DIR-100 is an Ethernet Broadband Router equipped with NAT network address translation technology. It enables the Hypermedia Gateway to connect to a public IP and to operate behind firewalls equipped with Network Address Translation (NAT); this provides maximum network security.
7 Hypermedia Management Console (HMC) The Hypermedia Management Console, pictured to the right, opens in a browser. The interface is divided into a Navigation Pane and a Configuration and Monitor Pane. In addition, the interface includes identifying information. Server IP Address Navigation Pane Configuration and Monitor Pane Popup and dropdown menus are available from the Configuration and Monitor pane. Color is used to indicate editing mode and changes of status. Contents Next Page
8 Hypermedia HG-2000/3U 9 Chapter 2 ISDN (BRI) Features & Functionality Designed as a PBX add-on solution for GSM connectivity, the HG-2000/3U connects directly to the BRI interface of the existing PBX (Private Branch exchange), and provides seamless interoperability between the existing phone system and the GSM mobile network. The HG-2000/3U enables the PBX to route incoming calls from the GSM mobile network directly to the PBX extensions. Similarly, outgoing calls originating on the extension side of the PBX can be terminated on the mobile network. Converting fixed-to-mobile and mobile-to-fixed calls into much cheaper mobile-to-mobile calls results in significant savings.
9 Hypermedia HG-2000/3U 10 Connections and Settings BRI Settings Specific call-routing requirements demand a flexible but powerful gateway. Variations between PBXs, locations and other variables necessitate a rich suite of advanced BRI settings. The HG-2000/3U can be configured to match almost any routing design in almost any setting. BRI Connections: Cellular and VoIP Use the Media Connection screen to configure the connections from the QBRI card to other cards and channels in the system, including the Cellular cards (CG) and, optionally, the VoIP ports (MG). The matrix can be configured in any combination. The QBRI card connects between the HG-2000/3U and a PBX. It can also be assigned to connect directly to the operator's network. From the BRI Card branch of the HMC navigation pane, click the Connection Settings sub-branch. The BRI General Settings screen is displayed. On the General Settings screen, configure the parameters required for the specific installation, such as PLL Clock Sync, Line Coding, Framing Type, Dial Method, and ISDN Version. Figure 3: BRI General Settings Screen Figure 2: BRI Media Matrix
10 Hypermedia HG-2000/3U 11 Functionality Highlights BRI Card Dial Plan The HG-2000/3U gateway supports the vast majority of functions required by today s demanding users. Following are several highlights. Dial Filters A dial plan establishes the expected number and pattern of digits for a telephone number. This includes country codes, access codes, area codes and all combinations of digits dialed. For instance, the North American public switched telephone network (PSTN) uses a 10-digit dial plan that includes a 3-digit area code and a 7-digit telephone number. Filters enable consistent, automatic management of phone numbers before they are routed. Figure 4: Configuring BRI Dial Filters Figure 5: HMC BRI Card Dial Plan Screen Most PBXs support variable-length dial plans that use 3 to 11 digits. Dial plans must comply with the telephone networks to which they connect. Use the BRI Card Dial Plan screen to configure the local dial plan:
11 Hypermedia HG-2000/3U 12 Chapter 3 GSM Features and Functionality Note: This document uses the term GSM to describe the cellular telephony network and service. GSM network is also known as: mobile network, cellular network, or wireless network. The HG-2000/3U supports a full suite of GSM features and functionality. These enable a company to significantly reduce the money spent on telephony. Using the HG-2000/3U, companies can eliminate the expense of international calls placed from mobile phones. The HG-2000/3U eliminates local and international interconnection charges between fixed and mobile calls and capitalizes on mobile-to-mobile rates. The HG-2000/3U s highly flexible GSM card can hold from 4 to 16 SIM cards enabling easy growth and adaptation to changing corporate needs.
12 Hypermedia HG-2000/3U 13 GSM Overview Typically, mobile network operators charge the least for calls within their own networks. Costs increase for calls either originating outside of the network or terminating outside of the network. In addition, each mobile network is limited to a specific location or area. Costs increase for mobile calls originating or terminating outside of the mobile network s location. The HG-2000/3U resolves both of these issues and, thereby, potentially delivers significant savings. A Hypermedia GSM card has 4 modules, each of which can have 1 to 4 SIM holders. Therefore, each card can hold up to 16 SIM cards. In addition, a Hypermedia Gateway can include several SIM cards. The first SIM cards of each module are loaded from the front of the Cellular Card. It is worth noting that the GSM features answer the needs of the growing world of GSM-only users. Developing countries often leap-frog land-line infrastructure and invest only in GSM infrastructure. Similarly, the rapidly growing trend amongst younger users is to rely entirely upon GSM telephony. Additional SIM cards are loaded at the rear of the Cellular Card. Controllers for modules 1 through 4 Some parameters can be applied either to specific SIM cards, or to specific modules, or to the entire GSM card, or to all the cards in the system.
13 Hypermedia HG-2000/3U 14 Connections and Settings Functionality Highlights Specific user requirements demand a flexible but powerful gateway. Variations between service providers, locations and other variables necessitate a rich suite of advanced GSM settings. The HG-2000/3U can be configured to match almost any routing design in almost any setting. GSM Connections: VoIP and/or ISDN Use the Media Connection screen to configure the connections from the channels of a GSM card to other cards and channels in the system, including the BRI (QBRI) and PRI cards and the VoIP ports (MG). Connections can be either static or dynamic, as in the case of LCR. The HG-2000/3U gateway supports the vast majority of functions required by today s demanding users. Following are several highlights. Dial Filters Filters enable consistent, automatic management of phone numbers before they are routed. GSM Settings Use the Settings screen to enable and disable advanced parameters. For assistance with these, contact Technical Support. PIN Codes Figure 6: Cellular Dial Filters Screen Use the PIN Codes screen to configure the PIN code that the gateway uses when a SIM card with an active PIN is inserted. Consult your GSM provider for more information regarding the PIN code.
14 Hypermedia HG-2000/3U 15 Locks Use Locks to restrict access to specific GSM operators and/or a specific SIM card. When a lock is defined, the Gateway will only accept calls from an operator or a SIM card that matches the Lock number. In addition, use Locks to prevent roaming handover in cases where the Gateway is located close to county or country borders. definition can be applied just to the module, to all 4 modules on the card, or to all the GSM cards in the system. Additional Functions Following are additional popular functions supported by the HG-2000/3U. Volume Settings Use Volume Settings to adjust a GSM module s audio level. This can be done for each of the GSM modules on a Hypermedia Gateway. SIM Counters Use the SIM Counter screen to review the actual usage time of each SIM card and to set counter steps per module. SIM Select Use the SIM Select screen to manually select and activate a SIM card for current use. SIM Select should not be used when SIM Auto-Manage is active. The Figure 7: SIM Select Screen MSN Values Use Multiple Subscriber Number (MSN) values to route incoming calls to a specific extension on the PBX. You can assign a different extension for each channel or route all channels to the same extension. Reset Use the GSM Card Reset screen to reset either the entire GSM card or a specific GSM module. SIM Auto Manage Use the SIM Auto Manage screen to configure the Gateway to automatically alternate and/or discontinue use of SIM cards. This enables load-balancing between a GSM module s SIM cards based on preconfigured switched time cycle.
15 Hypermedia HG-2000/3U 16 Call Counter Steps Steps, Time Periods, and Repetitions work as follows: If the Time Period = 60 seconds and Repetition = 3, and the caller speaks for 10 seconds, he will be charged for Time Period = 60 seconds. If the caller speaks for 110 seconds, he will be charged for Time Period = 120 seconds. This charging policy that is, step expires after 180 seconds that being the Time Period (= 60 seconds) times the Repetition (= 3). Then, the next step is applied. The final step will always be 1 x Unlimited. Call Limits Use the Call Limits screen to set the amount of time the Gateway will wait for an outgoing call to be answered and to set the maximum length of outgoing call. CLI Blocking Use the Calling Line Identification (CLI) Blocking screen to hide the caller s phone number from the person receiving the call. Cell Selection Use the Cell Selection screen to manually camp on a GSM site. Most often, a user selects the strongest cell site. However, if the Base Transceiver Station (BTS) or tower is locked, this service cannot be applied. USSD SIM Balance Use the USSD SIM Balance screen to check the balance remaining on a SIM card and to add value to (charge) a SIM card. Figure 8: Call Limits Screen
16 Hypermedia HG-2000/3U 17 Chapter 4 LCR Features and Functionality HG-2000/3U s advanced Least Cost Routing (LCR) functionality enables greater customizing and, potentially, saves money. HG-2000/3U s LCR capabilities maximize available resources according to the needs of the enterprise. Using HG-2000/3U s LCR functionalities, Hypermedia gateways route calls based on specific rules created by the administrator. This results in cost-effective per-call routing. In contrast, without LCR, all call routes are fixed.
17 Hypermedia HG-2000/3U 18 Connections and Settings Functionality Highlights Satisfying specific enterprise call-routing requirements demands a flexible but powerful gateway. The HG-2000/ 3U can be configured to match almost any routing design in almost any setting. The LCR module supports the vast majority of functions required by today s demanding users. Following are several highlights. LCR Links: VoIP and/or GSM and/or ISDN Use the Media Connection screen to link the channels of of one media with the channels of a second media. Once linked, the resources can be allocated to match enterprise requirements. LCR Rules Rules determine to which Group a call is routed. When Time Frames (next section) are not used, the Rule is applied continuously. Advantages of Grouping Resources Creating Groups simplifies consistent application of LCR strategies. With the HG-2000/3U, Groups can also be assigned filters, outgoing calls can be logged, and calls can be recording for billing purposes. Figure 9: LCR Rules Screen Use the LCR Resource Map to assign Resources to Groups. Resources can be either bi-directional or be reserved for outbound calls only.
18 Hypermedia HG-2000/3U 19 Time Frames Number Filters Time Frames determine the hours of the day when a Rule is applied. When Time Frames are not used, the Rule is applied continuously. Use Number Filters to manipulate numbers that are sent to, or received by, the Gateway. All numbers are compared to the configured set of rules. If the number matches a rule, the rule is applied and a new number is dialed. Figure 10: Time Frames Screen Filters Filters enable consistent, automatic management of phone numbers before they are routed. The HG-2000/3U supports both IN and OUT filters. An IN filter changes the destination number before the list of rules is processed. An OUT filter changes the destination number after the list of rules has been processed and the destination group has been chosen. The process is identical for both. Figure 11: Number Filters Screen Advanced Call Routing (ACR) Use ACR to define, for example, white lists and black lists. ACR supplements the LCR rules created on the Rules screen.
19 Hypermedia HG-2000/3U 20 Chapter 5 Monitoring and Management With the HG-2000/3U s browser-based Hypermedia Management Console and suite of monitors, network administrators simply and efficiently review usage, identify problems, and increase system effectiveness.
20 Hypermedia HG-2000/3U 21 Monitoring via the HMC To review the Hypermedia Gateway s cards and CDRs, Network Administrators simply access the associated Hypermedia Management Console monitor. Monitoring Board (Card) Usage Monitoring the system is essential. The Hypermedia Management Console enables the network administrator to monitor cards and CDRs. To monitor the GSM cards, open the Monitor > Cellular branch of the Hypermedia Management Console. There are three views. To view information about all the SIM slots on all the cellular modules, expand the Monitor > Cellular Cards sub-branch and select All Cells. The Cellular Cards Reception screen is displayed. To view information about the SIM slots on a specific cellular modules, especially the reception level and the BER level, expand the Monitor > Cellular Cards sub-branch and select Reception. Then, select a specific slot. The Cellular Cards Reception screen for that card is displayed. To view information about the status of SIM slots on a specific cellular module,expand the Monitor > Cellular Cards sub-branch and select Status. Then,select a specific slot. The Cellular Cards Status screen for that card is displayed. Use the Monitor VoIP Cards > VoIP Status screen to review information about the status of the VoIP card, to control line activity, and to manage and download the daily VoIP CDR files. To view information about the status of either BRI or PRI channels on a specific card, expand either the Monitor > BRI Cards or the Monitor > PRI Cards sub-branch and select either BRI Status or PRI Status. Then, select a specific slot. The status screen for that card is displayed. Review the card status, the status of channels, and the totals. Figure 12: All Cells Screen
21 Hypermedia HG-2000/3U 22 Monitoring CDRs The Console Suite Network Administrators simply and efficiently review Call Detail Records (CDR) using the Hypermedia Gateway CDR monitors. Call Back and Call Through CDRs Use the Monitor > LCR Card > CB/CT CDRs screen to manage and download the Callback and Callthrough CDR files. The following three consoles are installed during initial installation: Use the Log Console to review the primary system log. All events and alarms are printed to this log. LCR CDRs Use the Monitor > LCR Card > LCR CDRs screen to manage and download the Callback and Callthrough CDR files. Figure 13: The Log Console Use the CDR Console to download and review Call Detail Records. Hypermedia Technical Support might ask you to assist them by completing tasks using the Service Console.
22 Hypermedia HG-2000/3U 23 Management via the HMC Managing Number Filters Hypermedia equipment includes a suite of management tools. Use Number Filters to perform advanced manipulations on numbers that are sent to, or received by, the Gateway. All numbers are compared to the configured set of rules. If the number matches a rule, the rule is applied and a new number is dialed. Managing Users Use the Add User branch to define Gateway users and to manage their Callback access. Use the User List to review a list of defined Gateway users and to modify their definitions. Managing VPN Groups Managing Tasks with the Scheduler Use the Task Scheduler to configure the Gateway to repeat commands at scheduled intervals. Five commands are preconfigured. In addition, it is possible to manually configure a command. Create VPN Groups to enable organized assignment of features or parameters. For example, Callback resources can be reserved for a specific VPN Group. Figure 15: Dropdown Menu of Tasks and Table of Scheduled Tasks Figure 14: VPN Groups Screen
23 Hypermedia HG-2000/3U 24 Managing Global Parameters Use the HGS Setup Parameters tool to configure parameters affecting global Hypermedia Gateway behavior. Managing Cause Code Cause codes represent the reason for releasing the a call. The Hypermedia Gateway can manipulate the releasing Cause code that is, Convert to Value if we do not want to report the exact reason for call release. Use the PRI Cause Conversion tool for this. Hypermedia Gateway Server List Use the Hypermedia Gateway Server list to review a list of existing servers and to add a new server. Other Hypermedia configuration and management tools can be accessed from the Hypermedia Gateway Server list. When accessed from here, the IP address and the password from the list are used, avoiding the need to re-enter these.
24 Hypermedia HG-2000/3U 25 Chapter 6 Add-on Packages A selection of software packages are available that expand the functionality of Hypermedia Gateways. They are described in this section.
25 Hypermedia HG-2000/3U 26 HyperSavings Package The HyperSavings Package supplies the following functionality. DISA/Call Through Direct Inward System Access (DISA) also called Call Through is the ability to access internal PBX features from an outside telephone line. For example, DISA allows someone calling in from outside the PBX to obtain an internal system dial-tone and to dial calls as if from one of the extensions attached to the PBX. personal code. If the personal code is authorized, the user will receive a dial-tone. Similarly, calling a pre-allocated corporate telephone (DDI) number using a cellular, landline or IP phone, users receive a dial-tone from the PBX, just as if they were calling from within the organization. After receiving permission, users can place calls to external numbers. This service is useful when companies wish to enable employees to dial long-distance calls using company lines, or when several branches of the same company wish to use a single PBX. PBX } VoIP Cellular PSTN 1st Leg HyperGateway 2nd Leg VoIP Cellular PSTN Figure 16: Call Through Diagram For resource control, the user is required to call a DISA number which connects him to the resources allocated to DISA. For security, the user can be required to enter his Figure 17: Allocation of Resource to Call Through
26 Hypermedia HG-2000/3U 27 Corporate Call Back This is a service for savings on international calls. The Hypermedia Gateway can provide a Callback service that is available for corporate users equipped with mobile handsets from anywhere in the world. Callback is designed for users who are making calls from any international destination back to their home country. A variation of this service enables the pre-ordering of the destination party. Upon receiving the order, the service initiates a call to the authorized originating number (firstleg party). As soon as the first party answers, the system calls to the pre-ordered number (second-leg party) and initiates a call between the two parties. Trigger 1st Leg HyperGateway 2nd Leg Office PBX Extensions PSTN trigger the callback to the registered user. The user then can make unlimited consecutive outbound calls by keying double pound key (#, #). Fixed Trigger Call-Back With the Fixed Trigger Callback service, users call a pre-allocated corporate telephone number, often called a DDI (direct dial in) number, and then receive a callback call on their registered callback number. After receiving the callback call, users can make unlimited consecutive outbound calls by keying double pound key (#, #). SMS Call-Back Users also can initiate a Call-Back by sending an SMS message, which should include the destination number, to the designated number. After receiving the callback call, users can make unlimited consecutive outbound calls by keying double pound key (#, #). Figure 18: Callback Diagram There are three ways to trigger a Call-Back. CLI Call-Back The CLI Callback service is used in countries where CLI (calling line identification or caller ID) is available through the PTT. The user dials the DDI number to Figure 19: Allocation of Resource to Callback
Reducing your telecommunications costs Research firm IDC 1 has estimated that a VoIP system can reduce telephony-related expenses by 30%. Voice over Internet Protocol (VoIP) has become a viable solution
Reducing your telecommunications costs Research firm IDC 1 has estimated that a VoIP system can reduce telephony-related expenses by 30%. TechAdvisory.org SME Reports sponsored by Voice over Internet Protocol
SERVICE DELIVERY OVERVIEW Voyant offers a managed converged voice and Internet solution for businesses owning and managing a premise-based KTS or PBX system. Voice and Internet services are delivered over
TDS 1280 Enterprise Class Communication System A High-Performance Telephone Communication System for Midsize Up to Large Enterprises 64 TO1280 PORTS TDS 1280 Enterprise Class Communication System Support
Mobile TeleSystems (MTS) Converges Fixed and Mobile Telephony MTS creates new revenue opportunities with new services. EXECUTIVE SUMMARY Mobile TeleSystems (MTS) Industry: Telecommunications BUSINESS CHALLENGE
GLOSSARY OF CELLUAR TERMS Air Interface: It is the operating system of a wireless network.. Airtime: The amount of time a person spends talking on their cellular device. AMPS: Advanced mobile phone service
This chapter provides information about the feature. This chapter contains the following information:, page 1 System Requirements, page 6 Interactions and Restrictions, page 7 Availability Information,
Cellular Communication Cellular Communication Cellular communication is designed to provide communications between two moving units, or between one mobile unit and one stationary phone or land unit (PSTN).
Internet Telephony PBX System IPX-2000 Quick Installation Guide Overview PLANET IPX-2000 is the next generation voice communication platform for the small to medium enterprise. Designed as an open, scalable,
Yeastar S-Series VoIP PBX Solid IP Phone System for SME Another breakthrough from Yeastar, the new S-Series raises the price performance bar and sets new standards. Yeastar has always meant quality, reliability,
NEOS GSM The new GSM compatible Digital EPABX Business Opportunity For GSM Service Providers Why GSM?? Need of GSM PBX? A substitute for non feasible PRI connectivity and obsolete landline phones No cabling,
Spectrum Enterprise SIP Trunking Service Vertical TM Wave IP500TM / Wave IP2500 TM Release 4.0, 4.5 IP PBX Configuration Guide About Spectrum Enterprise: Spectrum Enterprise is a division of Charter Communications
Thinking about implementing Skype Connect? Read this guide first. Skype Connect provides connectivity between your business and the Skype community. By adding Skype Connect to your existing SIP-enabled
Hypermedia HG-7000 Product Manual 3U and 6U SMS Pro Gateways 2b, Professor Bergman St., Rabin Science Park, Rehovot, 7670504, Israel Telephone: (+972)-77-4445050 Fax: (+972)-8-936-3066 For general inquiries:
OpenScape Business V1 Tutorial Internet Telephony Configuration Guide Version 1.2 Table of Contents 1. Introduction 4 2. Internet Configuration 5 2.1. OpenScape Business with external Router 5 2.2. OpenScape
Establishing voice communication over a packet network is similar to configuring a static route: You are establishing a specific voice connection between two defined endpoints. Call legs define the discrete
CHAPTER 14 extends the rich call control capabilities of Cisco Unified Communications Manager from the primary workplace desk phone of a mobile worker to any location or device of their choosing. For example,
Dialogic PowerVille CC Cloud Centrex Cloud-based Feature-rich Integrated VoIP Solution for Business and Residential Customers Dialogic s PowerVille Cloud Centrex is a carrier-class solution that enables
Grandstream Networks, Inc. Table of Content INTRODUCTION... 4 REGISTER SIP TRUNKS... 5 Configuration... 5 DID / DOD Configuration... 9 Direct Inward Dialing (DID)... 9 Direct Outward Dialing (DOD)... 10
For a Converged World Aspire from NEC allows you to converge your voice and data network and enjoy the many advantages of Voice over Internet Protocol (VoIP) while enjoying the hundreds of features you
NEOS3000A GSM Least Cost Wireless Router For model GW-NEOS-TC35A5-Q1 or later Operating Manual. Model GW-NEOS-TC35A5-Q1 or later Operating manual Ver. 1.2 November 2005 page 1 Introduction Thank you for
SIP TRUNKING THE COST EFFECTIVE AND FLEXIBLE ALTERNATIVE TO ISDN A cost-effective alternative to ISDN that provides flexibility and continuity Reliable voice services SIP trunking is the fastest-growing
Semi-Active GSM Monitoring System SCL-5020SE Technology Introduction: GSM networks are most popular and widespread wireless communication media across the world, having a wide customer base in Europe and
Minnesota Microsoft Unified Communications User Group Welcome! March 26, 2009 Today s presenters Rob Hanson email@example.com Business Development for UC Colleen Reynolds firstname.lastname@example.org Ops Manager
IPX Voice Communication Features and Services Auto Attendant Direct Inward Dialing (DID) Auto CO Line Hunting Multi Operator Hunting PBX/ATA Dial Plan Speed Call Short Number Life Line Custom Define Call
ANALOG GATEWAY (4,8 & 16 Ports) Up to 16 analog ports (FXO/FXS) Simple Installation Flexible Call Routing 128ms DSP based Echo Cancellation Interoperable with most of the SIP based IP PBX like 3CXTM, ASTERISKTM,
TeliSIM: MVNO Solution for Highly Profitable Global Roaming Services MVNO Solution for Highly Profitable Global Roaming Services A Guide to Help You Provide Highly Profitable Mobile Voice, Data and SMS
Data Sheet Cisco Unified Customer Voice Portal 9.0 Product Overview Cisco Unified Customer Voice Portal (Unified CVP) is an award-winning product that provides IP-based selfservice and call routing. It
PBX System Copyright 2017. All Rights Reserved. LocaNet, the LocaNet logo and LocaPhone are trademarks of within the EU. Any other trademarks mentioned in the document are the property of their respective
Avaya one-x Mobile User Guide for Palm Treo 18-602149 Issue 2 December 2008 2008 Avaya Inc. All Rights Reserved. Notice While reasonable efforts were made to ensure that the information in this document
Connect V6 Hybrid IP PBX Owners Manual INTRODUCTION TO YOUR COMMANDER CONNECT SYSTEM... 9 System description... 9 System options... 10 Commander Contact Details... 10 USING THIS HANDBOOK... 11 INTRODUCING
CHAPTER 1 An Overview of Cisco MobilityManager This chapter describes Cisco MobilityManager and includes these sections: Key Features and Benefits, page 1-4 Use Case Examples, page 1-5 Compatibility with
Mizu PBX Tutorial The Mizu PBX is a Class5 softswitch application running as a service on the Microsoft Windows operating systems. Modules: SIP, WebRTC, RTMP, access roles, routing (priority, weight, BRS
THE CONVERGENCE OF POWER AND FLEXIBILITY O ff i c e S e r v 7 0 0 0 S e r i e s E n t e r p r i s e I P C o m m u n i c a t i o n S o l u t i o n s 7000 Series Enhance productivity by empowering workers
HIGH DENSITY MEDIA GATEWAY WITH MODULAR INTERFACES AND SBC Main Characteristics Modular composition: 8 telephony modules compatible with E1/T1, FXO, FXS and/or GSM technologies. Integrated SBC: o Up to
Avaya Solution & Interoperability Test Lab Application Notes for Configuring NovaLink NovaMail with Avaya IP Office Using S0 / PRI Issue 1.0 Abstract These Application Notes describe the compliance testing
3 Wireless Signaling and Intelligent Networking The first two chapters provided an introduction to the history of mobile communications, its evolution, and the wireless industry standards process. With
Allworx Software Features Software Features Allworx Advanced options for improved communications. Allworx provides a wide range of software feature options to help your business increase its productivity,
Mobile Collaboration with Avaya one-x Clients for Unified Communications Avaya one-x clients deliver a softwarebased user experience that lets you easily deploy consistent mobility and communications strategies
SysMaster GW 7000 Digital Gateway User Manual version 1.0 Copyright 2003 by All rights reserved. No part of this manual may be reproduced or transmitted in any form without written permission from. The
CHAPTER 15 Cisco Unified Mobility Advantage and Cisco Unified Mobile Communicator Integration Cisco Unified Communications Manager provides certain functionality for Cisco Unified Mobile Communicator clients
Version 55.18.0.X Yeastar Information Technology Co. Ltd. ===Firmware Version: V22.214.171.124== Applicable Model: TG800 Release Date: August 5, 2015 New Features 1. Added Auto CLIP feature. 2. Added FTP Enable
ShoreTel User s Guide for Nokia Release 7.1 July 2013 Legal Notices Document and Software Copyrights Copyright 1998-2013 by ShoreTel Inc., Sunnyvale, California, USA. All rights reserved. Printed in the
All Area Networks Custom Connect customer s guide to how it works version 1.0 The information in this technical user guide and the glossary of terms has been prepared in good faith and is correct at the
WellGate 2504 ( 4-FXS ) and WellGate 2540 (4-FXO gateway) in Peer to Peer mode with Hotline by port to port application. Note : Please use Windows XP IE 6.0 web browser or above version to configure both
Course Outline Comprehensive Training on Bypass/SIM Box Fraud Detection and Termination Duration: 3 Days Title: Comprehensive Training on Bypass/SIM Box Fraud: Detection and Termination Duration: 3 day
State of Alaska Office of Information Technology (OIT) Wired Telephony Services EXISTING INFRASTRUCTURE SERVICE BACKGROUND The State relies heavily upon telecommunications to provide government services
Digital Advisory Services Professional Service Description SIP IP Trunk with Field Trial for Legacy PBX Model 1. Description of Services. 1.1 SIP IP Trunk with Field Trial for Legacy PBX Verizon will assist
Grandstream Networks, Inc. UCM6xxx Series IP PBX Lightweight Call Center Guide Table of Contents INTRODUCTION... 4 UCM CALL CENTER FEATURES LIST... 5 Call Queues... 5 Virtual Queue... 7 Position Announcement...
Glossary of Unified Communications Terms As the pace of unified communication adoption increases, Interconnects and MSPs may find themselves struggling to keep up with both the demand from customers and
GLOBAL SYSTEM FOR MOBILE COMMUNICATION (2) ETI2511 Friday, 31 March 2017 1 SYLLABUS GSM General architecture and interfaces of cellular system and the PSTN and Internet networks: BTS, MSC, Internetworking,
Spectrum Enterprise SIP Trunking Service AastraLink Pro 160 Firmware 1.2.2 build 1005 IP PBX Configuration Guide About Spectrum Enterprise: Spectrum Enterprise is a division of Charter Communications following
System Manual Version 1.0 Revised on 16-Apr-2010 CONNECTION ELECTRONICS LTD. NOTICE The information contained in this document is believed to accurate in all respects but is not warranted by Connection
Dialogic BorderNet Session Border Controller Solutions Dialogic BorderNet Solutions Supercharge Connections between Networks, Services and Subscribers with Ease and Scale The BorderNet family of session
CHAPTER 18 Last revised on: September 27, 2007 This chapter describes the following main methods for migrating to an Telephony system (or any other phone system, for that matter): Phased Migration, page
Aristel AN4004 GSM FIXED WIRELESS TERMINAL MANUAL V3.1 This manual contains important information. Please read before using the equipment. Contents 3 Function Description:...4 4 Operation Guide:...4 4.1
Voice Performance Statistics on Cisco Gateways The Voice Performance Statistics on Cisco Gateways feature enables the collection of voice call signaling statistics and VoIP AAA accounting statistics based
Avaya Solution & Interoperability Test Lab Application Notes for DiVitas Mobile Unified Communications with Avaya Communication Manager and Avaya SIP Enablement Services Issue 1.0 Abstract These Application
28 Deploying IN Services in a Mobile Environment D. Haran Comverse Network Systems 170 Crossways Park Drive, Woodbury, New York 11797 USA Tel: (516) 677-7200, Fax: (516) 677-7355 E-mail email@example.com
Access to a new world of feature rich, connected anywhere telephony, at low cost and low risk Com.X20 provides a scalable and powerful telephony solution for the Enterprise Business Com.X20(G) is a flexible
Voice Trunking in an IP World: Charting a Practical Path for PRI and SIP Michael Harris Kinetic Strategies 1 Voice Trunking in an IP World: Charting a Practical Path for PRI and SIP Information technology
Mobile Gateways 1983 2013 30 Years TELES TELES Mobile Gateways... making your fixed network a thing of the past. Mobile Gateways Anyone who travels a lot on business or has to work from home needs good
epbx-100a-128 User s Manual Version: epbxum_128.300 CH1. Overview 5 1.1 Specifications 5 1.2 Hardware Overview 7 1.2.1 Front Panel and LED Indication...7 1.2.2 Back Panel...8 CH2. Start to configure epbx-100a-128
DIGITAL SUPER HYBRID TELEPHONE SYSTEM KX-TD16-7 KX-TD1232-7 XDP E X TRA D EVICE P ORT CALLER ID DISPLAY T1 and ISDN-PRI COMPATIBLE AUTOMATIC ROUTE SELECTION 2-WAY DIRECT INWARD DIAL (DIOD) Digital Systems
Data Sheet Analog Voice Network Interface Modules for Cisco 4000 Series ISRs NIMs Support Multiple Voice Applications on the Cisco 4000 Series ISRs Introduction The Cisco 4000 Series Integrated Services
Design of a Routing Mechanism to Provide Multiple Mobile Network Service on a Single SIM Card Boobalan. P, Krishna. P, Udhayakumar. P, Santhosh. A Abstract-The current scenario in mobile networks is that
IPMobility IPedge/VIPedge Feature Description 3/25/14 OVERVIEW The Toshiba IPMobility App allows a mobile device to act as an IPedge or Strata CIX system extension and provides users with the access to
Why Active Communications and Office 365? Deploying Microsoft Lync Enterprise Voice with Office 365 has never been easier! The world of IT, telephony and communications is changing rapidly. The internet
VoIP Basics Guide A COMPREHENSIVE GUIDE FOR VOIP BEGINNERS Call Us at 1.800.801.3381 OnSIP 2016 What is VoIP? Voice over Internet Protocol (VoIP) is the method for delivering phone calls over IP. IP covers
Avaya Solution & Interoperability Test Lab Application Notes for Configuring Tidal Communications tnet Business VoIP with Avaya IP Office using SIP Registration - Issue 1.0 Abstract These Application Notes
Grandstream Networks, Inc. Table of Contents OVERVIEW... 4 SETUP GUIDE SCENARIO... 4 QUICK INSTALLATION... 5 Connecting the UCM6200... 5 Access UCM6200 series Web Interface... 5 CREATE USER EXTENSION...
Cisco WebEx Connected Audio What if you could provide employees, partners, and vendors with a better, more consistent web conferencing experience that actually helped reduce costs? Our integrated audio
Function Description 7 September 2011 / Ver. F Contents 1 Introduction... 1 1.1 Abbreviations and Glossary... 1 2 Technical Solution... 2 2.1 Connection to IP-PBX... 2 2.2 Connection to Traditional Telephony
VIRTUAL PBX USER GUIDE All you need to know Customer Service At MyNetFone, we pride ourselves on delivering friendly and prompt customer service & technical support. So if you run into any questions or
Information HiPath 1100 V7 Convenient communication for small and medium-sized companies Communication for the open minded Siemens Enterprise Communications www.siemens.com/open Communication that fits
Fixed Mobile Convergence- The Hows and Whys Michael F. Finneran, Principal dbrn Associates, Inc. 516-569-4557 firstname.lastname@example.org Our Panel Imran Akbar VP and GM Converged Enterprise Communications
Avaya Solution & Interoperability Test Lab Application Notes for Configuring MTS Application Suite with Avaya Aura Communication Manager Issue 1.0 Abstract These Application Notes describe the configuration
CHAPTER 4 Class of Service Restrictions and Outgoing Call Barring Features Revised: March 24, 2011, The Cisco BTS 10200 Softswitch supports class of service restrictions and call barring options on outgoing
Mobile Advantage Wireless Office A digital wireless office system for TDMA/136 networks Rune Johanson, Mikael Nilsson and Torbjörn Ward Ericsson s digital wireless office system was developed especially