High-speed sensing of

Size: px

Start display at page:

Download "High-speed sensing of"

Jordan Kennedy
5 years ago
Views:

FIBER SENSORS High Speed Digital Sensor PNP output type available Timer ight intensity monitor Automatic sensitivity setting High-speed sensing of 9!s http://www.fiber-sensor.

[Category applicable for semiconductor manufacturing: TWW2, Process Equipment] [Applicable standards: U 6C-1] [Additional test / evaluation standards as per intended use: U991, SEMI S2-2] * Passed

s high-speed response Solves saturation problems at close distances Easy maintenance, as main and sub units are identical is high-speed type with response time of 9!s. This is ideal for applications which require high-speed sensing and sensing of minute objects.

1 FIBER SENSORS High Speed Digital Sensor PNP output type available Timer ight intensity monitor Automatic sensitivity setting High-speed sensing of 9!s * U 6C-1 compatible, Passed the U 991 Environment Test based on SEMI S2-2. [Category applicable for semiconductor manufacturing: TWW2, Process Equipment] [Applicable standards: U 6C-1] [Additional test / evaluation standards as per intended use: U991, SEMI S2-2] * Passed the U 991 Environment Test Conforming to EMC Directive U Recognition FZ- FX-11A FX-11 FX-CH Color Detection Analog Output Manually Set Bank Unit 9!s high-speed response Solves saturation problems at close distances Easy maintenance, as main and sub units are identical is high-speed type with response time of 9!s. This is ideal for applications which require high-speed sensing and sensing of minute objects. Chip component sensing Objects moving at high speed can be sensed accurately. The light amount can be set to one of three levels at a fixed response time (9!s). MODE Normal (standard) S-D1 MODE Approx. 5 % of standard S-D2 MODE Approx. 8 % of standard Used for general sensing. Used when the received light amount becomes saturated during mode. ong-range sensing made possible with built-in optical lens For the first time in the industry, an optical double coupling lens has been incorporated directly into the fiber sensor itself. This lens maximizes the light emission efficiency, resulting in a tremendous improvement in the sensing range. Sensing ranges with small diameter fibers and ultra-small diameter fibers, which have become very popular in recent years due to the miniaturization of chip components, have been increased by 5 % over previous values achieved with other amplifiers. (Double coupling lens) Conventional fiber sensors (No lens) Both main and sub units utilize the same amplifier body. This feature allows for easy mounting in the sideby-side configuration. The main and sub unit functions are distinguished only by the proper use of the -core main cable and the 1-core sub cable. Moreover, by utilizing the same body for both main and sub units, inventory management and maintenance is simplified. Sub cable Main cable Easy operation with MODE NAVI MODE NAVI uses six indicators to display the amplifier s basic operations. The current operating mode can be confirmed at a glance, so even a first time user can easily operate the amplifier without becoming confused. Emitting element Double coupling lens The lens concentrates the light, greatly increasing emitting efficiency. Disperses the light reduces emitting efficiency. MODE NAVI (MODE indicators) 128

2 ORDER GUIDE Amplifiers Quick-connection cable is not supplied with the amplifier. Please order it separately. Appearance Emitting element Output FIBER SENSORS High speed P Red ED NPN open-collector transistor PNP open-collector transistor Quick-connection cables Quick-connection cable is not supplied with the amplifier. Please order it separately. Main cable Description CN-7-C Main cable Sub cable End plates CN-7-C1 CN-7-C2 CN-7-C5 CN-71-C1 CN-71-C2 CN-71-C5 ength: ength: ength: 5 m ft ength: ength: ength: 5 m ft.15 mm 2 -core cabtyre cable, with connector on one end Cable outer diameter: " mm ".118 in.15 mm 2 1-core cabtyre cable, with connector on one end Cable outer diameter: " mm ".118 in Sub cable CN-71-C End plates are not supplied with the amplifier. Please order it separately when the amplifiers are mounted in cascade. Appearance Description OPTIONS MS-DIN-E Mounting bracket for amplifier Horizontal mounting type Vertical mounting type When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates ensure that all amplifiers are mounted together in a secure and fully connected manner. Two pcs. per set Designation Description Amplifier mounting bracket Universal sensor mounting stand (Note) MS-DIN-2 MS-AJ1-F MS-AJ2-F Note: Refer to p.22 l for the universal sensor mounting stand. Mounting stand assembly for fiber (For, or threaded fibers) 6 rotation Amplifier mounting bracket MS-DIN-2 Universal sensor mounting stand Using the arm which enables adjustment in the horizontal direction, sensing can also be done from above an assembly line. MS-AJ1-F MS-AJ2-F 6 rotation Manually Set Bank Unit FX-11 FX-CH Color Detection Analog Output FZ- FX-11A 6 rotation 2 2 Angle adjustment:2 Height adjustment: 15 mm 5.96 in approx. Mounting hole for screw 6 rotation 2 2 Angle adjustment:2 Height adjustment: 15 mm 5.96 in approx. Mounting hole for screw 129

3 FIBER SENSORS FZ- FX-11A FX-11 FX-CH Color Detection Analog Output Manually Set Bank Unit ORDER GUIDE Standard fibers [Thru-beam type (one pair set)] Standard ong sensing range Elbow Side-view Shape of fiber (mm in) With lens With lens Sleeve 9 mm.54 in.118 "1.48 ".58 Sleeve 4 mm in "1.48 ".58 Sleeve 9 mm.54 in M14 "2.5 ".98 "2.5 ".98 ".88 ".5 Sleeve 4 mm in.8.1 ".88 ".5 "1.5 ".59 "4 ".157 "1.5 ".59 "2.5 ".98 "1 " "2 " "1 ".9 "2.5 ".98 Sensing range (mm in) (Note 1) mode ,7.149 cable length : Free-cut m 2.88 ft (Note 2) (Note 2) Allowable bending radius Sleeve Sleeve FT-FM FT-SFM2 FT-B8 FT-NB8 FT-FM2 FT-FM2S FT-FM2S4 FT-T8 FT-SFM2 FT-N8 FT-NFM2 FT-NFM2S FT-NFM2S4 FT-SNFM2 FT-R8 FT-V FT-SFM2SV2 FT-V22 FT-V41 Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 2 % max. depending upon how the fiber is cut. The sensing range for is for mode. Please contact our office for details on sensing ranges in the and modes. Notes: 2) The fiber cutter is not attached with FT-NB8 and FT-N8. Please order it separately. 1

4 ORDER GUIDE Sharp bending fibers / Flexible fibers [Thru-beam type (one pair set)] Sharp bending Wide beam Rectangular Narrow beam ong sensing range Shape of fiber (mm in) Wide area sensing Sensing width m 1.26 in W5H69D2 W.197H2.717D.787 Wide area sensing Sensing width 1m.4 in W4.2H1D1.5 W.165H1.22D.51 Easy mounting Top sensing WH8D12 W.118H.15D.472 Easy mounting Side sensing WH12D8 W.118H.472D.15 Easy mounting Front sensing W8.5H12D W.5H.472D.118 Side-view type with small light dispersion "4 " ong sensing range With lens " ".118 Sensing range (mm in) (Note 1) mode , (Note 2) cable length : Free-cut Allowable bending radius Rm Rm Rm Rm Rm FT-WA FT-WA8 FT-WZ8H FT-WZ8E FT-WZ8 FT-WKV8 FT-WS8 FT-W8 FIBER SENSORS Flexible Small diameter Standard Rectangular Standard Side-view Small diameter " ".118 "2.5 ".98 "1.5 ".59 "1 " "2 ".79 Easy mounting Top sensing WH8D12 W.118H.15D.472 Easy mounting Side sensing WH12D8 W.118H.472D.15 Easy mounting Front sensing W8.5H12D W.5H.472D.118 "1.5 ".59 "1 " mm in Rm Rm Rm R4 mm R.157 in R4 mm R.157 in R4 mm R.157 in FT-WS FT-WS8 FT-W4 FT-WS4 FT-WV42 FT-Z8H FT-Z8E FT-Z8 FT-P8 FT-P6 FT-P4 FT-P2 FT-PS1 Manually Set Bank Unit FX-11 FX-CH Color Detection Analog Output FZ- FX-11A Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 2 % max. depending upon how the fiber is cut. The sensing range for is for mode. Please contact our office for details on sensing ranges in the and modes. Notes: 2) The fiber cable length practically limits the sensing range to,5 mm in long. 11

5 FIBER SENSORS ORDER GUIDE Special use fibers [Thru-beam type (one pair set)] Wide beam Array Shape of fiber (mm in) Wide area sensing Sensing width m 1.26 in W5H69D2 W.197H2.717D.787 Wide area sensing Sensing width 1m.4 in W4.2H1D1.5 W.165H1.22D.51 Top sensing W5H15D15 W.197H.591D.591 Side sensing W5H15D15 W.197H.591D.591 Sensing range (mm in) (Note 1) mode (Note 2) cable length : Free-cut Allowable bending radius FT-A FT-A8 FT-AFM2 FT-AFM2E FZ- FX-11A FX-11 FX-CH Color Detection Analog Output Manually Set Bank Unit Special use Narrow beam Ultra-small diameter Tough flexible Side-view ".5 ".18 ".7 ".146 "4 ".157 Side-view W2H1.5D2 W.79H.59D.787 Beam diameter ".125 mm ".5 in " mm ".118 in ".25 mm ". in Beam diameter ".25 mm ". in " mm ".118 in ".4 mm ".16 in mm in R5 mm R.197 in FT-K8 FT-KV8 FT-KV1 FT-E12 FT-E22 FT-P81X Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 2 % max. depending upon how the fiber is cut. The sensing range for is for mode. Please contact our office for details on sensing ranges in the and modes. Notes: 2) The fiber cable length practically limits the sensing range to,5 mm in long. 12

6 OPTIONS Environment resistant fibers [Thru-beam type (one pair set)] Environment resistant Heat-resistant Vacuum Chemical-resistant Shape of fiber (mm in) 5 C 662 F 5 C 662 F Sleeve 6 mm 2.62 in Allows flexible wiring 2 C 92 F 2 C 92 F 1 C 266 F Side-view "2.1 ".8 Easy mounting Rectangular SEMI S2 compliant W7H15D1 W.276H.591D.512 "5.5 ".217 "5.5 ".217 Sensing range (mm in) (Note 1) mode cable length : Free-cut (Note 2) Allowable bending radius Sleeve R mm R1.181 in R2 mm R7.874 in R mm R1.181 in FT-H5-M2 FT-H5-M2S6 FT-H2W-M1 FT-H2W-M2 FT-H2-M1 FT-H1-FM2 FT-Z82Y FT-8Y FT-V8Y FT-6V FT-6V FIBER SENSORS Manually Set Bank Unit FX-11 FX-CH Notes: 1) Please take care that the sensing range of the free-cut type fiber may be reduced by 2 % max. depending upon how the fiber is cut. The sensing range for is for mode. Please contact our office for details on sensing ranges in the and S-dodes. Notes: 2) The allowable cutting range is 5 mm in from the end that the amplifier inserted. The vacuum type fiber must be used with the following products as a set. FT-J6: at atmospheric side (one pair set) FV-BR1: Photo-terminal (one pair set) Semi-standard fibers (Custom made per order) The fiber cable length or sleeve length of the standard fibers can be modified at your request. Select the fiber cable length (symbol ) or the sleeve length (symbol f ) from the table below. Standard threaded (free-cut) FT-FM With sleeve FT-FM -S f FT-FM FT-NFM2-S f With large diameter lens Small diameter threaded with sleeve (free-cut) Wide beam 2C 92F heat-resistant 5C 662F heat-resistant Chemical-resistant Basic model No. FT-WA- FT-WA8- FT-A- FT-A8- FT-H2-M FT-H5-M FT-Z8 Y cable length (Unit: m ft) 9.84, , , 2.88, , , , (Note), 9.84, , , 2.88, , , , , , , f Sleeve length (Unit: cm in) 1, 2.787, 1.181, , , , , 8.15, 9.54,.97, , , 2.787, 1.181, , , , , 8.15, 9.54,.97, , Note: The standard fiber has a fiber cable length and a 4 cm in or 9 cm.54 in sleeve length. Correlation between sensing range attenuation coefficient and fiber cable length The longer the fiber cable, the shorter the sensing range. Sensing range attenuation coefficient cable length # (m ft) Color Detection Analog Output FZ- FX-11A 1

7 FIBER SENSORS ORDER GUIDE Standard fibers (Reflective type) Shape of fiber (mm in) Sensing range (mm in) (Note 1, 2) mode cable length : Free-cut Allowable bending radius ong sensing range Coaxial mm ft FD-B8 FD-5 Sleeve 9 mm.54 in "2.5 ".98 Sleeve 4 mm in "2.5 " Sleeve FD-FM2 FD-FM2S FD-FM2S4 FD-T8 Small diameter " " FD-T4 FD-S8 FZ- FX-11A FX-11 FX-CH Color Detection Analog Output Manually Set Bank Unit Standard Side-view Elbow Sleeve 9 mm.54 in "1.48 ".58 Sleeve 4 mm in "2.5 ".98 "1.48 ".58 "2 ".79 "5.8 " Small diameter "1.5 " " " (Note ) Sleeve FD-N8 FD-N4 FD-NFM2 FD-NFM2S FD-NFM2S4 FD-SNFM2 FD-R8 FD-SFM2SV2 FD-V41 Notes: 1) The sensing range is specified for white non-glossy paper (FD-B8, FD-5, FD-FM2, FD-FM2S, FD-FM2S4, FD-N8, FD-T8, FD- S8 and FD-R8: 44 mm in, FD-T4, FD-N4, FD-NFM2, FD-NFM2S, FD-NFM2S4, FD-SNFM2, FD- SFM2SV2 and FD-V41: 22 mm in) as the object. Notes: 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 2 % max. depending upon how the fiber is cut. The sensing range for is for mode. Please contact our office for details on sensing ranges in the and modes. Notes: ) The fiber cutter is not attached with FD-N8 and FD-N4. Please order it separately. 14

8 ORDER GUIDE Sharp bending fibers / Flexible fibers (Reflective type) Flexible Sharp bending Standard Small diameter Standard Side-view High precision Shape of fiber (mm in) "2 ".79 " 1 " Sleeve 4 mm in " ".118 " ".118 " ".118 "1.5 ".59 "1.48 ".58 Small spot for sensing minute objects Coaxial For sensing minute objects Coaxial Sensing range (mm in) (Note 1, 2) mode cable length : Free-cut Allowable bending radius Rm Rm Sleeve Rm Rm R.79 in Rm R4 mm R.157 in FD-W8 FD-W44 FD-WT8 FD-WS8 FD-WT4 FD-WG4 FD-WSG4 FD-WV42 FD-P8 FD-P6 FD-P5 FD-P4 FD-P2 Notes: 1) The sensing range is specified for white non-glossy paper [ mm in (FD-W8, FD-WT8, FD-WS8 and FD-P8: 44 mm in, FD-WG4, FD-WSG4, FD-P6 and FD-P5: 22 mm in)] as the object. Notes: 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 2 % max. depending upon how the fiber is cut. The sensing range for is for mode. Please contact our office for details on sensing ranges in the S-D1 and S-D2 modes. FIBER SENSORS Manually Set Bank Unit FX-11 FX-CH Color Detection Analog Output FZ- FX-11A 15

9 FIBER SENSORS ORDER GUIDE Special use fibers (Reflective type) Wide beam Array Shape of fiber (mm in) W7H15D W.276H.591D1.181 Top sensing W5H2D2 W.197H.787D.787 Side sensing W5H2D2 W.197H.787D.787 Coaxial Sensing range (mm in) (Note 1, 2) mode cable length : Free-cut Allowable bending radius FD-A15 FD-AFM2 FD-AFM2E FD-G4 High precision Coaxial Coaxial Coaxial Coaxial mm in FD-G6 FD-EG1 FD-EG2 FD-EG FZ- FX-11A FX-11 FX-CH Color Detection Analog Output Manually Set Bank Unit Special use Ultra-small diameter Fixed-focus reflective iquid level sensing ".5 ".2 "1.5 ".59 Coaxial ".65 ".26 " ".118 ".5 ".2 Coaxial ".8 ".1 Contact type "6 ".26 W6H18D14 W.26H.79D to to.4 (Convergent point 6) Mountable on pipe Standard Applicable pipe diameter: Outer dia. "6 to "26 W25H1 mm ".26 to "1.24 in transparent pipe D2 PVC, fluorine resin, polycardnate, acrylic, W.984H.512 glass, wall thickness 1 to mm.9 to D in Mountable on pipe Applicable pipe diameter: Outer dia. "6 to "26 For m.9 in thick PFA pipe W25H1 mm ".26 to "1.24 in transparent pipe D2 PFA (fluorine resin) or equivalently W.984H.512 transparent pipe, wall thickness m D in 5 mm in (Note ) 5 m ft 5 m ft Protective tube R4 mm R1.575 in R15 mm R.591 in FD-E12 FD-E22 FD-EN5S1 FD-ENM1S1 FD-4 FD-F8Y FD-F41 FD-F91 FD-F4 FD-F9 Tough flexible 16 Small spot for sensing minute objects Coaxial High precision (Note ) FD-P81X FD-G6X Notes: 1) The sensing range is specified for white non-glossy paper [ mm in (FD-A15, FD-G4, FD-G6X: 22 mm in, FD-AFM2, FD-AFM2E, FD-P81X: 44 mm in, )] as the object. Notes: 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 2 % max. depending upon how the fiber is cut. The sensing range for is for mode. Please contact our office for details on sensing ranges in the and modes. Notes: ) Following is the allowable cutting range from the end that the amplifier is inserted FD-F8Y: 1, mm 9.7 in, FD-G6X: 7 mm in.

10 ORDER GUIDE Environment resistant fibers (Reflective type) Environment resistant Heat-resistant Vacuum Shape of fiber (mm in) 5 C 662 F Coaxial 5 C 662 F Sleeve 6 mm 2.62 in "2.8 ".1 in 2 C 92 F Coaxial 5 C 662 F Sleeve 9 mm.54 in 1 C 266 F "2.1 ".8 in 2 C 92 F Coaxial Sensing range (mm in) (Note 1, 2) mode,281 ft,281 ft,281 ft,281 ft Sleeve Sleeve R2 mm R7.874 in FD-H5-M2 FD-H5-M2S6 FD-H2-M1 FD-H5-2S FD-H2-21 FD-H1-FM2 FD-6V Notes: 1) The sensing range is specified for white non-glossy paper [44 mm in ] as the object. Notes: 2) Please take care that the sensing range of the free-cut type fiber may be reduced by 2 % max. depending upon how the fiber is cut. The sensing range for is for mode. Please contact our office for details on sensing ranges in the and S-dodes. The vacuum type fiber must be used with the following products as a set. FT-J6: at atmospheric side (one pair set) FV-BR1: Photo-terminal (one pair set) FD-FM FD-FM -S f Small diameter threaded with FD-NFM2-S f sleeve (free-cut) 2C 92F heat-resistant FD-H2-M 5C 662F heat-resistant FD-H5-M Semi-standard fibers (Custom made per order) The fiber cable length or sleeve length of the standard fibers can be modified at your request. Select the fiber cable length (symbol ) or the sleeve length (symbol f ) from the table below. Standard threaded (free-cut) With sleeve Basic model No cable length (Unit: m ft) 9.84, , , 2.88, , (Note), 9.84, , , 2.88, , , cable length : Free-cut f Sleeve length (Unit: cm in) Allowable bending radius 1, 2.787, 1.181, , , , , 8.15, 9.54,.97, , , 2.787, 1.181, , , , , 8.15, 9.54,.97, , Note: The standard fiber has a fiber cable length and a 4 cm in or 9 cm.54 in sleeve length. Correlation between sensing range attenuation coefficient and fiber cable length The longer the fiber cable, the shorter the sensing range. Sensing range attenuation coefficient cable length # (m ft) FIBER SENSORS Manually Set Bank Unit FX-11 FX-CH Color Detection Analog Output FZ- FX-11A Accessories (attached with fibers) cutter attachment FX-CT2 FX-AT2 (for fixed-length fiber) FX-AT for "2.m ( ".87 in fiber ( FX-AT4 (for "m ".9 in fiber) FX-AT5 (for "1. mm ".51 in fiber) FX-AT6 for "m ".9 in and " 1. mm ".51 in ( ) mixed fiber Notes: 1) cutter is not supplied as accessory along with FT-NB8, FT-N8, FD-N8 and FD-N4. Please order it separately. Notes: 2) The fiber attachment is not attached with FT-N8/NB8, FT/FD-P8 and FD-N8, The previous FX-AT attachment is attached with FD-N4. 17

11 FIBER SENSORS FZ- FX-11A FX-11 FX-CH Color Detection Analog Output Manually Set Bank Unit SPECIFICATIONS Item Supply votage Power consumption Output Utilization category Output operation Short-circuit protection Response time Operation indicator Stability indicator MODE indicator Digital display Sensitivity setting Fine sensitivity adjustment function Interference prevension function Timer function Environmental resistance Pollution degree Ambient temperature Ambient humidity Ambient illuminance EMC Voltage withstandability Insulation resistance Vibration resistance Shock resistance Emitting element Material Connecting method Cable extension Weight NPN output 12 to 24 V DC % Ripple P-P % or less Normal operation: 96 mw or less (Current consumption 4 ma or less at 24 V supply voltage) ECO mode: 6 mw or less (Current consumption 25 ma or less at 24 V supply voltage) NPN open-collector transistor Maximum sink current: ma (Note 1) Applied voltage: V DC or less (between output and V) Residual voltage: 1.5 V or less [at ma (Note 1) sink current] DC-12 or DC-1 ight-on or Dark-ON, selectable with jog switch Incorporated 9!s or less Orange ED (lights up when the output is ON)) Green ED (lights up under stable light received condition or stable dark condition) RUN: Green ED, TEACH ADJ /D ON TIMER PRO: Yellow ED 4 digit red ED display 2-level teaching / imit teaching / Manual adjustment Incorporated Not incorporated (The communication function is not incorporated) (Note 1) Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective (Timer period:.5 to 5 ms approx.) (Industrial environment) to 55 C 14 to 11 F If 4 to 7 units are connected in cascade: to 5 C 14 to 122 F, if 8 to 16 units are connected in cascade: to 45 C 14 to 11 F (No dew condensation or icing allowed), Storage: 2 to 7 C 4 to 158 F 5 to 85 % RH, Storage: 5 to 85 % RH Sunlight:,?x at the light-receiving face, Incandescent light:,?x at the light-receiving face EN , V AC for one min. between all supply terminals connected together and enclosure 2 MΩ, or more, with 25 V DC megger between all supply terminals connected together and enclosure to 15 Hz frequency,.75 mm. in amplitude in X, Y and Z directions for two hours each 98 m/s 2 acceleration ( G approx.) in X, Y and Z directions for five times each Red ED (modulated) Enclosure: Heat-resistant ABS, Case cover: Polycabonate, Switch: Acrilic Connector connection Extension up to total m ft is possible with. mm 2, or more, cable. 2 g approx. PNP output P PNP open-collector transistor Maximum source current: ma (Note 1) Applied voltage: V DC or less (between output and V) Residual voltage: 1.5 V or less [at ma (Note 1) source current] ( ) Refer to p.78 l for fiber specifications. Notes: 1) 5 ma, if five, or more, amplifiers are connected in cascade. When this sensor used by cascading along with the /2/11 series, since the communication function is not incorporated, mount identical models together. Notes: 2) The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below. Main cable (-core): CN-7-C1 (cable length.281 in), CN-7-C2 (cable length in), CN-7-C5 (cable length 5 m in) Sub cable (1-core): CN-71-C1 (cable length.281 in), CN-71-C2 (cable length in), CN-71-C5 (cable length 5 m in) 18

12 I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagram Sensor circuit Tr D ZD Internal circuit NPN output type Color code of quick-connection cable (Brown) V (Note 1) (Black) Output ma max. (Note 2) (Blue) V (Note 1) Users circuit oad 12 to 24 V DC % Notes: 1) The quick-connection sub cable does not have V (brown) and V (blue). Notes: 2) 5 ma max., if five, or more, amplifiers are connected together. Symbols D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : NPN output transistor Wiring diagram Brown (Note) Black Terminal arrangement diagram Color code of quick-connection cable Blue (Note) V Output V oad 12 to 24 V DC % Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. FIBER SENSORS P I/O circuit diagram Sensor circuit Tr D Internal circuit ZD PNP output type Color code of quick-connection cable (Brown) V (Note 1) ma max. (Note 2) (Black) Output oad (Blue) V (Note 1) Users circuit 12 to 24 V DC % Notes: 1) The quick-connection sub cable does not have V (brown) and V (blue). Notes: 2) 5 ma max., if five, or more, amplifiers are connected together. Symbols D : Reverse supply polarity protection diode ZD: Surge absorption zener diode Tr : PNP output transistor Wiring diagram Brown (Note) Black Terminal arrangement diagram Color code of quick-connection cable oad Blue (Note) 12 to 24 V DC % Note: The quick-connection sub cable does not have brown lead wire and blue lead wire. V Output Manually Set Bank Unit FX-11 FX-CH Color Detection Analog Output FZ- FX-11A V 19

13 FIBER SENSORS FZ- FX-11A FX-11 FX-CH Color Detection Analog Output Manually Set Bank Unit Setting distance (mm in) Setting distance (mm in) Setting distance (mm in) SENSING CHARACTERISTICS (TYPICA) Parallel deviation FT-B8 # eft Center Right Operating point?(mm in) FT-E22 # eft Center Right Operating point?(mm in) Sensing fields FD-B8 Thru-beam type Setting distance (mm in) Thru-beam type Reflective type White nonglossy paper # Setting distance (mm in) eft Center Right Operating point?(mm in) FT-FM2 # eft Center Right Operating point?(mm in) FD-NFM eft Center Right Operating point?(mm in) Thru-beam type FT-NFM2 Thru-beam type FT-E12 Thru-beam type Setting distance (mm in).97 Reflective type White non-glossy paper # Please contact our office more details on models the not described below Setting distance (mm in) # eft Center Right Operating point?(mm in) FD-E eft Center Right Operating point?(mm in) Setting distance (mm in) White nonglossy paper # # eft Center Right Operating point?(mm in)

14 PRECAUTIONS FOR PROPER USE Amplifier This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of machinery. It is a normal object detection sensor. Part description Operation indicator (Orange) MODE indicator / RUN (Green) MODE indicator / TEACH (Yellow) MODE indicator / ADJ (Yellow) Cascading amplifiers Make sure that the power supply is off while cascading or removing the amplifiers. Make sure to check the allowable ambient temperature, as it depends on the number of amplifiers connected in cascade. In case two, or more, amplifiers are connected in cascade, make sure to mount them on a DIN rail. When connecting in cascade, mount the amplifiers close to each other, fitting them between the optional end plates (MS-DIN-E) mounted at the two ends. When the amplifiers move on the DIN rail depending on the attaching condition, fitting them between the optional end plates (MS-DIN-E) mounted at the two ends. Up to maximum 15 amplifiers can be added (total 16 amplifiers connected in cascade.) When connecting more than two amplifiers in cascade, use the sub cable (CN-71-C) as the quick-connection cable for the second amplifier onwards. When this amplifier used by cascading along with the /2/11 series, since the communication function is not incorporated, mount indentical models together. Since this product does not incorporate the interference prevention function, please install not to be influenced of disturbance light, such as other sensors. Operation procedure When MODE key is pressed, the mode changes as per the diagram below. Power supply switched on Press MODE key Press MODE key RUN TEACH ADJ Stability indicator (green) MODE indicator / PRO (Yellow) Digital display (Red) Press MODE key PRO TIMER /D ON Press MODE key MODE indicator / /D ON (Yellow) MODE indicator / TIMER (Yellow) Press MODE key Jog switch Press MODE key MODE key Notes: 1) When jog switch is pressed, the setting is confirmed. Notes: 2) When MODE key is pressed for 2 sec., or more, the sensor returns to the RUN mode. Notes: ) Cancellation is possible by pressing MODE key during setting. Notes: 4) When Jog switch is turned in the RUN mode, the current threshold value is displayed. And then, the current light intensity display appears again automatically. For details of operation procedure, refer to the SUNX fiber sensor home page ( Set the fiber within the sensing range. Press MODE key to light up MODE indicator / TEACH (yellow). Press Jog switch in the object present condition. If the teaching is accepted, the read incident light intensity blinks in the digital display. The MODE indicator / TEACH (yellow) blinks. Press Jog switch in the object absent condition. Refer to p.115 ~ for general precautions, and to the PRO Mode Operation Guide or SUNX fiber sensor home page ( for details pertaining to operating instructions for the amplifier. Teaching The threshold values can be set by 2-level teaching or limit teaching, when the MODE indicator / TEACH (yellow) lights up. In case of 2-level teaching This is the method of setting the threshold value by teaching two levels, corresponding to the object present and object absent conditions. Normally, setting is done by this method. Step Description Display If the teaching is accepted, the read incident light intensity blinks in the digital display and the threshold value is set at the mid-value between the incident light intensities in the object present and the object absent conditions. After this, the judgment on the stability of sensing is displayed. In case stable sensing is possible: is displayed. Stability indicator (green) blinks. In case stable sensing is not possible: is displayed. Stability indicator (green) is off. The threshold value is displayed. blinks in the digital display. The incident light intensity appears in the digital display and the setting is complete. In case of limit teaching This is the method of setting the threshold value by teaching only the object absent condition (stable incident light condition). This is used for detection in the presence of a background body or for detection of small objects. Step Description Display Set the fiber within the sensing range. Press MODE key to light up MODE indicator / TEACH (yellow). Press Jog switch in the object absent condition. If the teaching is accepted, the read incident light intensity blinks in the digital display. The MODE indicator / TEACH (yellow) blinks. Press Jog switch to the side or the side. If Jog switch is turned to the side, scrolls (twice) the display from right to left, and the threshold level is shifted to a value approx. 15 % higher (lower sensitivity) than that set at 2. (Note) This is used in case of reflective type fibers. 4 If Jog switch is turned to the side, scrolls (twice) the display from right to left, and the threshold level is shifted to a value approx. 15 % lower (higher sensitivity) than that set at 2. (Note) This is used in case of thru-beam type fibers. After this, the judgment on whether the set shift amount is possible or not will be displayed. 5 When the shift is possible: is displayed. When the shift is not possible: is displayed. The threshold value is displayed. blinks in the digital display. The incident light intensity appears in the digital display and the setting is complete. Note: The approx. 15 % amount of shift is the initial value. The amount of shift can be changed in the PRO mode from approx. 5 to 8 % (5 % step). Refer to the SUNX fiber sensor home page ( for details of the setting method. FIBER SENSORS Manually Set Bank Unit FX-11 FX-CH Color Detection Analog Output FZ- FX-11A 141

15 FIBER SENSORS PRECAUTIONS FOR PROPER USE Amplifiers Refer to p.115 ~ for general precautions, and to the PRO Mode Operation Guide or SUNX fiber sensor home page ( for details pertaining to operating instructions for the amplifier. PRO mode Refer to the SUNX fiber sensor home page ( for details pertaining to the PRO mode s setting instructions and procedures. PRO settings can be done when MODE indicator / PRO (yellow) lights up. FZ- FX-11A FX-11 FX-CH Color Detection Analog Output Manually Set Bank Unit Table for PRO mode settings ADJ NAVI mode RUN Run This indicates normal sensing operation. PRO PRO Allows various detailed settings to be configured, such as save / load and other settings. TIMER Timer Configures operation of the timer. /D ON -ON / D-ON Sets output operation either ight-on, or Dark-ON. Adjust Allows fine adjustment of the threshold value. TEACH Teaching The threshold value is set by utilizing either 2-level teaching or limit teaching. PRO mode PRO1 PRO2 PRO PRO4 PRO5 Response time change Switches among light amount Digital display setting Allows selection of different content to be viewed in the digital display. Data bank load oads configuration setting from the data bank. Allows basic configuration information to be set in a single step, by inputting a 4-digit code. Notes: 1) Although the response time is 9!s or less in all settings, if the following item is set, the light amount can be changed. Display ight amount Usual (standard) About 5 % of the standard (Note 1) (P) cannot be set in the PRO4 mode. About 8 % of the standard Notes: 2) There is no item to set since the communication function is not incorporated in this amplifier. Notes: ) When the code setting function is used, refer to the code setting table given below. Coding PRO5 direct code setting table Direct code 1st figure 2nd figure rd figure 4th figure ight amunt Hysteresis Direct -ON/ code D-ON Display Direct Adjust code lock Timer lock Direct code Timer -ON digit ON NON OFF H-2 (standard) H- (large) H-1 (small) H-2 (standard) H- (large) H-1 (small) H-2 (standard) H- (large) H-1 (small) Timer setting Configures timer operation and timer period. Shift Shifts the threshold value by a certain percentage increment during limit teaching. Digital display inversion Sets the viewing orienation of the digital display. Data bank save Saves configuration setting into the data bank. Zero adjust Forces the numerical value for incident light intensity to, on the digital display. -ON Percent Peak -ON hold Bottom -ON hold D-ON digit D-ON Percent D-ON Peak hold D-ON Bottom hold Allows the selection of hysteresis level. ON ON ON OFF OFF OFF-delay OFF ON-delay OFF ONE-SHOT OFF-delay ON-delay ONE-SHOT NON Hysteresis Stability Permits selection of stability indicator response levels for changes in the range for lighting up. ECO mode setting Sets the digital display to turn off automatically. Adjust lock Allows fine adjustment of the threshold value to be directly performed during RUN mode. Reset All settings, except for data bank information, revert to factory settings. s ms 5 ms ms ms 5 ms ms ms 5 ms 142

16 DIMENSIONS (Unit: mm in) P Amplifier The CAD data in the dimensions can be downloaded from the SUNX fiber sensor home page : Refer to p.l for fiber dimensions. FIBER SENSORS Stability indicator (Green) Operation indicator (Orange) Digital display (Red) MODE key.7.28 Jog switch Beamemitting part Beamreceiving part Communication window (Note 1) Suitable for 5 mm 1.78 in width DIN rail Notes: 1) Not used. Notes: 2) When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates ensure that all amplifiers are mounted together in a secure and fully connected manner. Two pcs. per set. CN-7-C1 CN-7-C2 CN-7-C MS-DIN "1.8 " ".2 ".126 holes Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated) Main cable (Optional) ength () ength (mm in) CN-7-C1 1, 9.7 CN-7-C2 2, CN-7-C5 5, Amplifier mounting bracket (Optional) " ".118 cable t 1 t CN-71-C1 CN-71-C2 CN-71-C MS-DIN-E Material: Polycarbonate.5.41 Sub cable (Optional) End plates (Optional) (length 18 mm.79 in) pan screws square nut " ".118 cable ength () CN-71-C1 CN-71-C2 CN-71-C ength (mm in) 1, 9.7 2, , Manually Set Bank Unit FX-11 FX-CH Color Detection Analog Output FZ- FX-11A

Long-range sensing made possible with built-in optical lens Stable long-term sensing Enhanced worksite-friendly installability

Long-range sensing made possible with built-in optical lens Stable long-term sensing Enhanced worksite-friendly installability FIBER SENSORS FX-1 SERIES Digital Sensor PNP output type available Timer ight intensity monitor Interference prevention Automatic sensitivity setting FX-1 FX-2 Superior performance and advanced user-friendly