Slim Body Analog Fiber Sensor. Analog output type for diverse applications. Slim size. Analog voltage output. Various uses. Saturation indicator

Transcription

1 13 ASER Slim Body Analog Sensor selection guide...p.11~ / P.1~ Related Information General terms and conditions... P.1 Glossary of terms... P.93 ~ General precautions... P.9 ~ PHOTOEECTRIC PHOTOEECTRIC PARTICUAR MEASURE CONTRO SUNX website Interference prevention ASER Analog output for diverse applications FX-1 FX-3 FX-1 FX-31-F Analog voltage output It incorporates an analog voltage output of 1 to 5 V. Various uses In combination with various s of fi bers and the ultracompact digital panel controller, CA series, can be used for various applications, such as, height evaluation, level detection by differential sensing, etc. CA series (Refer to p.793~.) Digital panel controller Interference prevention function Two sets of fi bers can be mounted close together or face to face. Slim size Being only 1 mm.39 in thick, it can be mounted in a narrow space. Only 1 mm.39 in thick 1 mm.39 in Saturation indicator The saturation indicator lights up when the output reaches 5 V. Hence, the can be easily adjusted even without using a tester. Moreover, an incident beam indicator which brightens up in proportion to the amount of incident beam (output voltage) is also incorporated. Incident beam indicator (Red) Saturation indicator (Green)

2 ORDER GUIDE P.1 ~ SPECIFICATIONS P.17 I/O CIRCUIT DIAGRAMS P.1 SENSING CHARACTERISTICS P.1 ~ Slim Body Analog 1 PRECAUTIONS FOR PROPER P.19 DIMENSIONS P.19 APPICATIONS Detecting level difference When differential sensing is used, no readjustment is required even if the refl ectivity of the objects changes. Ascertaining the number of translucent films The number of overlapping translucent fi lms can be ascertained. Measuring inner diameter of rings Rings can be sorted according to their inner diameter. ASER EECTRIC EECTRIC ORDER GUIDE Amplifier Appearance Model No. Supply voltage Analog output 1 to V DC ± 1 % Analog voltage Output voltage: 1 to 5 V Accessory MS-DIN- (Amplifi er mounting bracket) PARTICUAR CONTRO [ (one pair set)] ASER Thru-beam Type Sharp bend ong sensing range Standard ong sensing range Standard Small diameter Shape of fi ber head (mm in) ens mountable With lens ens mountable With sleeve ens mountable With sleeve With lens ens mountable M ø.5 ø.9 M M ø1. ø.5 ø.5 ø.9 ø. ø.35 ø1.5 ø.59 ø3 ø.11 M ø.5 ø.9 ø1.5 ø.59 Sensing range (Note 1,) 3 mm.9 in 35 mm 1.37 in mm.315 in 1 mm.99 in 15 mm.91 in 5 mm 3.3 in 5 mm 3.3 in 1 mm in Features Twice the sensing range for the same diameter ong sensing range with small fi ber heads of ø.5 mm ø.9 in Free-cut Miniature head but having the same sensing range as the standard fiber Suitable for detection in a congested equipment Free-cut The fi ber can be bent sharply, like an electric wire, to avoid space wastage in installation because of its small allowable bending radius of R1 mm R.39 in or more. Fiber cable length : free cut m.5 ft m.5 ft m.5 ft m.5 ft m.5 ft m.5 ft Model No. FT-B FT-SFM FT-FM FT-FMS With sleeve 9 mm 3.53 in FT-FMS With sleeve mm in FT-SFM FT-T FT-NFM FT-NFMS With sleeve 9 mm 3.53 in FT-NFMS With sleeve mm in FT-SNFM FT-WS FT-W FT-WS FT-W FT-WS FX-1 FX-3 FX-1 FX-31-F Special use Array Wide beam Top sensing Sensing width 11 mm.33 in 1 mm W. H31 D13.5 in W.15 H1. D.531 Side sensing mm.559 in The wide beam detects an object at any place within the range. The wide beam detects an object at any place within the range. m.5 ft m.5 ft Notes: 1) The sensing range is defi ned as the range until the saturation indicator lights up. ) Please take care that the sensing range of the free-cut fi ber may be reduced by % max. depending upon how the fi ber is cut. FT-A FT-AFM FT-AFME

3 15 Slim Body Analog ASER EECTRIC EECTRIC PARTICUAR CONTRO ASER FX-1 FX-3 FX-1 FX-31-F ORDER GUIDE [Refl ective ] Refl ective Type ong sensing range Standard Sharp bend High precision Standard Special use Array High precision Shape of fi ber head (mm in) M Coaxial M With sleeve M M Small diameter ø3 ø.11 M With sleeve M ø.5 ø.9 Coaxial M M ø.5 ø.9 ø1. ø.5 ø3 ø.11 M ens mountable Coaxial ø3 ø.11 Top sensing Sensing range (Note 1,) 31 mm 1. in mm. in Features ong sensing range Free-cut Fiber cable length : free cut m.5 ft m.5 ft Model No. FD-B FD-FM FD-FMS With sleeve 9 mm 3.53 in FD-FMS With sleeve mm in mm. in FD-T 7 mm Miniature head but having the same sensing range as the standard.7 in fi ber m.5 ft FD-T mm. in FD-S 7 mm.7 in mm.315 in mm.315 in 3 mm.11 in mm Side sensing.51 in.77 Coaxial M ens mountable Coaxial Small head ens mountable 1 mm.39 in 3 mm.11 in Suitable for detection in a congested equipment Free-cut The fi ber can be bent sharply, like an electric wire, to avoid space wastage in installation because of its small allowable bending radius of R1 mm R.39 in or more (FD-WG, FD-WSG: R mm R.79 in or more). Its wide beam meets various needs. Precise position sensing with coaxial fi ber Combination with the FX-MR3 lens gives an extremely small spot diameter of ø.3 mm ø.1 in approx. m.5 ft m.5 ft m.5 ft m.5 ft 5 mm 19.5 in Notes: 1) The sensing range is defi ned as the range until the saturation indicator lights up. Further, for the refl ective fi bers, it is specifi ed for white non-glossy paper [5 5 mm in (FD-B: 1 1 mm in)] as the object. ) Please take care that the sensing range of free-cut fi ber may be reduced by % max. depending upon how the fi ber is cut. FD-NFM FD-NFMS With sleeve 9 mm 3.53 in FD-NFMS With sleeve mm in FD-SNFM FD-W FD-WT FD-WS FD-WG FD-WSG FD-AFM FD-AFME FD-G FD-EG1 Accessories FX-CT (Fiber cutter) FX-AT1 (ø1 mm ø.39 in fi ber attachment) FX-AT13 (ø1.3 mm ø.51 in fi ber attachment) FX-CT FX-AT1 FX-AT13

4 Slim Body Analog 1 For thru-beam fi ber For refl ective fi ber Designation Model No. Description Expansion lens Superexpansion lens Side-view lens Pinpoint spot lens FX-E1 FX-E FX-SV1 FX-MR1 Zoom lens FX-MR Finest spot lens FX-MR3 Increases the sensing range by times or more. Sensing range (ens on both sides) (Note 1): 9 mm in (FT-B), 75 mm 9.5 in (FT-FM, FT-T), 35 mm 13.7 in (FT-W) Tremendously increases the sensing range with large aperture lenses. Sensing range (ens on both sides) (Note 1): 3, mm in (FT-B),,5 mm 9.5 in (FT-FM), 3, mm in (FT-W) Beam axis is bent by 9º. Sensing range (enses on both sides) (Note 1) : mm.1 in (FT-B), mm 7.7 in (FT-FM, FT-T), 5 mm.9 in (FT-W) Pinpoint spot of ø.5 mm ø. in. Applicable fi bers: FD-WG, FD-G Distance to focal point: ± 1 mm.3 ±.39 in The spot diameter is adjustable from ø.7 to ø mm ø. to ø.79 in according to how much the fi ber is screwed in. Applicable fi bers: FD-WG, FD-G Distance to focal point: 1.5 to 3 mm.7 to 1.93 in approx. (Screw-in depth: 7 to 1 mm.7 to.551 in) Spot diameter: ø.7 to ø mm ø. to ø.79 in (Screw-in depth: 7 to 1 mm ø.7 to ø.551 in) Extremely fi ne spot of ø.3 mm ø.1 in is achieved. Applicable fi bers: FD-WG, FD-EG1, FD-G Distance to focal point: 7.5 ±.5 mm.95 ±. in Spot diameter: ø.3 mm ø.1 in (FD-EG1), ø.5 mm ø. in (FD-WG, FD-G) Expansion lens FX-E1 Side-view lens FX-SV1 Zoom lens FX-MR Screw-in depth Distance to focal point Super-expansion lens FX-E Spot diameter Digital panel controller CA series Pinpoint spot lens FX-MR1 Finest spot lens FX-MR3 ASER EECTRIC EECTRIC PARTICUAR CONTRO ASER Digital panel controller (Note ) Protective tube For thru-beam fi ber Protective tube For refl ective fi ber CA-T Fiber bender FB-1 Universal sensor mounting stand (Note 3) FTP-5 (.5 m 1. ft) FTP-1 (1 m 3.1 ft) FTP-15 (1.5 m.91 ft) FTP-N5 (.5 m 1. ft) FTP-N1 (1 m 3.1 ft) FTP-N15 (1.5 m.91 ft) FDP-5 (.5 m 1. ft) FDP-1 (1 m 3.1 ft) FDP-15 (1.5 m.91 ft) FDP-N5 (.5 m 1. ft) FDP-N1 (1 m 3.1 ft) FDP-N15 (1.5 m.91 ft) This is a very small controller which allows two independent threshold level settings. Supply voltage: V DC ± 1 % Output: NPN open-collector transistor No. of inputs: 1 No. (sensor input) Input range: 1 to 5 V DC Main functions: Threshold level setting function, zero-adjust function, scale setting function, hysteresis setting function, start / hold function, auto-reference function, power supply ON-delay function, etc. For M thread For thread For M thread For M thread Applicable fi bers FT-B FT-FM FT-FMS FT-FMS FT-T FT-NFM FT-NFMS FT-NFMS FD-T FD-B FD-FM FD-FMS FD-FMS FD-T FD-NFM FD-NFMS FD-NFMS The protective tube, made of non-corrosive stainless steel, protects the inner fi ber cable from any external forces. The fi ber bender bends the sleeve part of the fi ber head at the proper radius. MS-AJ1-F Horizontal mounting Mounting stand assembly for fi ber For, M or M threaded MS-AJ-F Vertical mounting head fi bers Notes: 1) The sensing range is defi ned as the range until the saturation indicator lights up. ) For further details, refer to p.793~ for the ultra-compact digital panel controller CA series. 3) Refer to p.799 for the universal sensor mounting stand. Protective tube FTP- FDP- Fiber bender FB-1 Universal sensor mounting stand Using the arm which enables adjustment in the horizontal direction, sensing can also be done from above an assembly line. MS-AJ1-F Forward / back adjustment: 13 mm 5.11 in approx. 3 rotation Angle adjustment: ± MS-AJ-F Forward / back adjustment: 13 mm 5.11 in approx. 3 rotation Angle adjustment: ± 3 rotation 3 rotation Height adjustment: 15 mm 5.9 in approx. Mounting hole for M screw Height adjustment: 15 mm 5.9 in approx. Mounting hole for M screw FX-1 FX-3 FX-1 FX-31-F

5 17 Slim Body Analog ASER EECTRIC EECTRIC PARTICUAR CONTRO ASER Item SPECIFICATIONS Allowable bending radius Ambient temperature Ambient humidity Material Accessories Amplifier Item Supply voltage Current consumption Type Model No. Standard, small fi ber head, small diameter, sharp bend, long sensing range with lens, wide beam, array, high precision R5 mm R.9 in or more [Sharp bend: R1 mm R.39 in or more (FD-WG, FD-WSG: R mm R.79 in or more)] to +7 C to+15 F (Sharp bend: to + C to +1 F, FD-EG1: to + C to +1 F) (No dew condensation or icing allowed), Storage: to +7 C to +15 F (Sharp bend: to + C to +1 F, FD-EG1: to + C to +1 F) 35 to 5 % RH, Storage: 35 to 5 % RH Fiber core: Acrylic Sheath: Polyethylene : Brass (Nickel-plated) Threaded part of standard, threaded part of small diameter, threaded of sharp bend, high precision, array Stainless steel (SUS) FT-SFM, small fi ber head, FT-SNFM, FD-SNFM, non-threaded of sharp bend, FT-SFM, sleeve part of sleeve-attached fi ber Polycarbonate (ens of FT-WS), Norbornene resin (ens of FT-A) All fi bers: 1 fi ber attachment set Free-cut fi bers: FX-CT 1pc. (Fiber cutter) Threaded head fi bers: nuts pcs. (thru-beam : pcs.) and toothed lock washer 1 pc. (thru-beam : pcs.) FT-A:.5 1 mm..7 in seal slit mask pcs. and 1 1 mm.39.7 in seal slit mask pcs. 1 to V DC ± 1 % Ripple P-P 1 % or less 35 ma or less Analog output Response time Analog voltage Output voltage: 1 to 5 V (proportional to incident light intensity) Output current: 5 ma or less Output impedance: 7 Ω oad resistance: kω or more Temperature characteristics:.3 % F.S./ C or less Switchable either 1 ms or less, or 1 ms or less FX-1 FX-3 FX-1 FX-31-F Incident beam indicator Red ED (brightens up in proportion to analog output voltage) Saturation indicator Green ED (lights up when the analog output voltage reaches 5 V) Sensitivity adjuster -turn potentiometer with indicator Interference prevention function Incorporated Environmental resistance Ambient temperature 1 to +55 C +1 to +131 F (No dew condensation or icing allowed), Storage: to +7 C to +15 F Ambient humidity 35 to 5 % RH, Storage: 35 to 5 % RH Ambient illuminance Incandescent light: 1, lx at the light-receiving face Voltage withstandability 1, V AC for one min. between all supply terminals connected together and enclosure (Note ) Insulation resistance MΩ, or more, with 5 V DC megger between all supply terminals connected together and enclosure (Note ) Vibration resistance 1 to 15 Hz frequency,.75 mm.3 in amplitude in X, Y and Z directions for two hours each Shock resistance 1 m/s acceleration (1 G approx.) in X, Y and Z directions for fi ve times each Emitting element Red ED (Peak emission wavelength: nm. mil, modulated) Material Cable Enclosure: Heat-resistant ABS, Case cover: Polycarbonate, Fiber lock lever: PES. mm -core cabtyre cable, m.5 ft long Cable extension Extension up to total 1 m 3. ft is possible with.3 mm, or more, cable. (Note 3) Weight Net weight: g approx., Gross weight: 1 g approx. Accessories MS-DIN- (Amplifi er mounting bracket): 1 pc., Adjusting screwdriver: 1 pc. Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +3 C +73. F. ) The voltage withstandability and the insulation resistance values given in the above table are for the amplifi er only. 3) Take care that the output voltage drops when the cable is extended.

6 Slim Body Analog 1 I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagram Wiring diagram ASER Sensor circuit D1 +7 V D 7 Ω + D3 Internal circuit Color code (Brown) +V (Brown) Analog voltage output (Note) + (Orange / Violet) oad Interference oad resistance prevention wire kω or more (Blue) V Users circuit Symbols...D1: Reverse supply polarity protection diode D, D3: Surge absorption diode 1 to V DC ± 1 % Note: The analog voltage output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. Correlation between setting distance and output voltage FT-A SENSING CHARACTERISTICS (TYPICA) FT-AFM FT-AFME FT-B Brown Black Orange / Violet oad To the other amplifier s interference prevention wire Blue + 1 to V DC ± 1 % The sensing characteristics for the thru-beam and refl ective are listed in alphabetic order respectively. FT-FM FT-FMS FT-FMS FT-SFM FT-T Thru-beam EECTRIC EECTRIC PARTICUAR CONTRO ASER FT-NFM FT-NFMS FT-NFMS FT-SNFM 1,, 3,, Setting distance (mm in) Thru-beam Setting distance (mm in) 15.7 FT-SFM Setting distance (mm in) , , Setting distance (mm in) 31.9, , , Setting distance (mm in) FT-W FT-WS Setting distance (mm in), , Setting distance (mm in) FX-1 FX-3 FX-1 FX-31-F Setting distance (mm in) FT-W FT-WS FT-WS FD-AFM FD-AFME Reflective FD-B Refl ective FD-EG1 Refl ective 5 5 mm in 1 1 mm in 5 5 mm in , , Setting distance (mm in), Setting distance (mm in) Setting distance (mm in) Setting distance (mm in) 1.575

7 19 Slim Body Analog ASER SENSING CHARACTERISTICS (TYPICA) Correlation between setting distance and output voltage EECTRIC EECTRIC FD-FM FD-FMS FD-FMS FD-S FD-T Reflective 5 5 mm in FD-G Refl ective 5 5 mm in FD-NFM FD-NFMS FD-T FD-NFMS FD-SNFM Reflective 5 5 mm in FD-W FD-WT FD-WS Reflective 5 5 mm in PARTICUAR Setting distance (mm in) Setting distance (mm in) Setting distance (mm in) Setting distance (mm in) 7.7 FD-WG FD-WSG Refl ective CONTRO ASER 5 5 mm in Setting distance (mm in) 3.15 Correlation between setting distance and output voltage when using seal slit masks FT-A FX-1 FX-3 FX-1 With slit masks (.5 1 mm..7 in) on one side With slit mask (.5 1 mm..7 in) on both sides With slit mask (1 1 mm..7 in) on one side With slit masks (1 1 mm..7 in) on both sides FX-31-F , , Setting distance (mm in), , Setting distance (mm in) , , Setting distance (mm in), , , Setting distance (mm in), 7.7

8 Slim Body Analog 19 PRECAUTIONS FOR PROPER Never use this product as a sensing device for personnel protection. In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Refer to p.9 ~ for general precautions and p.15 for precautions of fi bers. s Do not use during the initial transient time (5 ms) after the power supply is switched on. The analog output is not incorporated with a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load. ASER EECTRIC EECTRIC Response time selection The response time of can be selected either 1 ms or 1 ms. If your detecting application does not need a quick response, 1 ms is recommended as it makes the detection secure against inductive noise and ambient light. If you choose 1 ms, pay attention to electromagnetic noise and ambient light. The response time of is the time required for the output voltage to rise from 1 V (dark state voltage) to [9 % of {light state voltage 1 V (dark state voltage)} + 1 V (dark state voltage)] or the time required for the output voltage to fall from the light state voltage to [1 % of {light state voltage 1 V (dark state voltage)} + 1 V (dark state voltage)]. The response time of is constant regardless of the amplitude of the output voltage. (e.g.) V (ight state) 3.7 V 3 V (ight state). V 1.3V 1 V (Dark state) 1. V 1 V t1 t1 t t (Dark state) t1 = t: Response time PARTICUAR CONTRO ASER DIMENSIONS (Unit: mm in) Refer to p.1~ for dimensions other than those given in the fi gures below. The CAD data in the dimensions can be downloaded from the SUNX website: Assembly dimensions with attached amplifier mounting bracket Interference prevention selection switch Response time selection switch Sensitivity adjuster (-turn) Fiber lock lever Beamreceiving part Beamemitting part ø3. ø.1 holes.57 Suitable for 35 mm 1.37 in width DIN rail Saturation indicator (Green) Amplifi er Incident beam indicator (Red) ø. ø.15 cable, m.5 ft long ø. 9 ø Attached amplifier mounting bracket (MS-DIN-) MS-DIN- Amplifi er mounting bracket (Accessory for ) ø1. ø ø3. ø.1 holes Malerial: Cold rolled carbon steel (SPCC) (Uni-chrome plated) t 1 t.39 FX-1 FX-3 FX-1 FX-31-F Note: The top view is shown without the cover.