Universal Bill Acceptor UBA-14-SS Integration Guide

Transcription

1 Universal Bill Acceptor UBA--SS Integration Guide UBA--SS Integration Guide June 9, 00 Component Names Acceptor Unit USB for Software Download Dip Switch Faceplate Connector Transport Unit Release Lever Diagnostic LEDs Cash Box External Connector Frame Unit

2 UBA --SS Integration Guide June 9, 00. Model Descriptions: The UBA model descriptions are structured to define the major components as shown below. MODEL TYPE SOFTWARE U B A - S S F 0 U S A 0 () () () ()()() ()() (9)(0)()()() () () () Series Name () CPU board type : USB I/F Applicable () Stacking configuration SS: Security stacker () Box capacity : 00 notes () Box color 0: Black (plastic) () Box handle color 0: Blue (standard) : Red N: WBA BOX without Handle J: WBA BOX with standard Handle () Transport unit color 0: Standard Color (Black) () Transport unit cover color 0: Blue (standard) (9) Faceplate 0: W/o faceplate : W/ UBA standard faceplate : W/ Blue/Blue LED A: W/ Blue/Blue LED (-line) (0) Intelligent cash box 0: W/o ICB board and ICB box : W/ ICB board and ICB box : W/ ICB board and w/o ICB box ()Optional board 0: Standard (no external I/F board) : With V/.V + RSC I/F Conversion Board : With RS-C I/F Conversion Board () Input/Output signals F: Photo-coupler Isolation R: RS-C () External Connection 0: Without Harness Harness : Standard Harness : OEM Harness : DCV/DC.V Conversion Harness (Photocoupler) : DCV/DC.V Conversion Harness (RS-C) () Country Code ISO based -digit code () Interface 0: JCM ID-00 Serial Interface : OEM Interface : OEM Interface (USB I/F). Technical Specifications: ) Acceptance Rate: Refer to Software Specifications* ) Bills Accepted: Width: mm, Length: 0 mm (up to 0mm with WBA steel cash box) ) Processing Speed: Approx. sec. to send credit signal, sec. to send vend signal. ) Escrow: bill ) Anti-stringing Mech.: PB mechanism (anti-pullback system JCM Patented) ) Cash Box Capacity: 00 notes or more ) Interface: ID-00/ID-0/ID-0 ) Weight: Approx..0kg (*) The following bills are excluded: - Bills with excessive or sparse magnetism, or unclear printing patterns. - Overlapped bills - Bill with stain, wear, wetness, tear or excessive wrinkles - Bill with folded corner or edge - Bill with incorrect cut dimensions or printing displacement When security measure against counterfeit is implemented, the software may not fulfill the specified level of acceptance rate.. Environment: ) Operation temperature: to +0ºC ) Storage temperature: -0 to +0ºC ) Relative humidity: 0 to %RH (non-condensed). Electrical Supply: ) Supply voltage: DCV ± % (NOTE: Use power supply with.0a or more) DCV ± % (NOTE: Use power supply with.a or more) - Only when used th Optional DCV/DC.V Conversion Board - ) Current consumption: DCV: Standby 00mA, In operation.a DCV: Standby 0mA, In operation.0a

3 UBA--SS Integration Guide June 9, 00. Installation [Down Stacking Only]: ) Remove power from host machine. ) Set UBA DIP switches, if required. The initial setting is all OFF where all the denominations are enabled. ) Connect the proper interface harness from the host machine to UBA. ) Install the UBA into the host machine via the mounting screws (M). There are mounting holes on the frame end and each on both sides of the frame. ) Apply power to the machine, verify that the red chip LED next to the dip switch is ON, and both red and green indicator LEDs are OFF. - If the red chip LED is OFF, check connections and make sure power is applied. - If any of the indicator LEDs are ON, check error codes to fix the problem. Check operation, insert banknotes of each denomination to verify that notes are accepted and credited properly in the host machine. Pan Head Screw M Less than mm deep M Plate Head Screw or. - Plate Head Inch Screw Side Mounting Back-to-back Mounting. DIP Swich Configuration: Default setting (all OFF) Front of UBA panel OFF ON OFF Switch Denomination disabled Denomination enabled Switch Denomination disabled Denomination enabled Switch Denomination disabled Denomination enabled Switch Denomination disabled Denomination enabled Switch Denomination disabled Denomination enabled Switch Denomination disabled Denomination enabled Switch Denomination disabled Denomination enabled Switch TEST MODE NORMAL MODE * For details about Dip Switch Settings, refer to the software Information Sheet.

4 UBA --SS Integration Guide June 9, 00. Connectors and Pin Assignment: External Connector 0 Socket: DRA-0PC-FO (JAE) Contact: D0--P-0000 (JAE) Mating Connector Socket: DRA-0SC-FO (JAE) Contact: D0--S-0000 (JAE) Pin Signal Name +V Power GND Power M.RES (PC OUT) +V I/F (PC IN) (GND I/F) Vbus -DATA +DATA (TTL) GND USB (GND I/F) LED Power (TTL) (TTL) (TTL) LED - (TTL) (TTL) I/O IN (OUT) (IN) IN/OUT IN/OUT (OUT) (IN) (IN) (IN) (OUT) (OUT) Function DC +V power DC 0V power Bill acceptor reset signal line (Signal output line from Acceptor to Controller) Interface Power: DC +V (Signal output line from Controller to Acceptor) (Interface power: photo-coupler DC 0V) USB Communication Vbus signal line: DC +V USB Communication input/output signal line USB Communication input/output signal line (TTL) USB Communication Ground: DC0V (Interface power: RS- DC0V) LED drive line - anode (TTL) (TTL) (TTL) LED drive line - cathode (TTL) (TTL) Do not connect - I/O (input/output) is the term from bill acceptor's side. - Signal name, I/O, and function with parenthesis are for photo-couper isolation and RS-C only. Front Bezel Connector (CN) Header: RF-H0(0)SD-0 (JST) Contact: RF-SC0 (JST) Housing: RF-0 (JST) Recommended Wire: UL00 AWG# to Pin. Signal Name +V Power GND (Power) LED Power LED - I/O Signal Descriptions DC +V Power DC 0V Power LED Drive Line (anode) LED Drive Line (cathode) - I/O (input/output) is the term from bill acceptor's side.

5 UBA--SS Integration Guide June 9, 00. Optional Conversion Board and Harness: The Optional Conversion Board can be attached to the UBA unit. Two types of the optional conversion board are available A-0 (EDP#:) A-0 (EDP#: ) DCV/DC.V and RS-C Signal Level Conversion Board This board will allow you to convert DCV to DC.V and communicate with RS-C Interface. RS-C Signal Level Conversion Board This board will allow you to communicate with RS-C Interface. Installing procedure for the Optional Conversion Board ) Press down the front latch and slide the UBA s acceptor unit forward. Acceptor Unit Front Latch ) Place the Optional Conversion Board and insert the M. Bind P Tight screws into two () insertion slots. Use a screw driver to tighten each attachment screws and secure the board in place. Optional Conversion Board M.x Bind P Tight Screws

6 UBA --SS Integration Guide June 9, 00 There are three type conbination kit of the board and harness. Board Harness DCV/DC.V and RS-C Signal Level Conversion Board (Part#: A-0) (EDP#: ) RS-C Signal Level Conversion Board (Part#: A-0) (EDP#: ) RS-C I/F Harness with MX W Sems Screw and Clump (Part#: 0-0-A) (EDP#: ) UBA V/RS-C Board + RS-C Harness Kit (EDP#: 00) UBA RS-C Board + RS-C Harness Kit (EDP#: ) External Interface Connection Structure for Optional Conversion Board Photo-Coupler I/F Harness with MX W Sems Screw and Clump (Part#: 0-0-A) (EDP#: 9) UBA V/RS-C Board + Photo-Coupler Harness Kit (EDP#: ) JCM s Communication Harness Prepare the harness as nessesary V (V) Output Line Gaming Machine TTL Level Communication Line External Reset Signal Line Removable Connector UBA V, V CN CN CPU Board Relay Connector RS-C Communication Line V/V Conversion DC/DC Converter * RS-C Conversion IC CN CN External Reset Signal Line * CN CN Optional Conversion Board USB Connector (A Type) USB Cable Photo-Coupler Communication Line * External Reset Signal Line * Interface Connector * The V/.V Conversion DC/DC Converter is NOT mounted on A-0 board. * For 0-0- harness. * For 0-0- harness. CN connector Header: 0-00 (JAPAN MOLEX) Contact: 00-0 (JAPAN MOLEX) Houseing: (JAPAN MOLEX) Recommended Wire: UL00 AWG# to Pin. Signal Name MRESET TXD RXD GND (I/F) Relay connector Header: (JAPAN MOLEX) Header Contact: 00-0 (JAPAN MOLEX) or (USA MOLEX) Housing: (JAPAN MOLEX) Housing Contact: (JAPAN MOLEX) Recommended Wire: UL00 AWG# to Pin. Signal Name V V GND

7 UBA--SS Integration Guide June 9, Maintenance: It is important to keep the bill path, rollers, and belts clean. The sensor lenses are transparent, and made of polymer material. Handle them with care. Use a soft lint-free cloth or cotton bud to wipe out dirt and stain on the surface of magnetic and optical sensors, rollers and belts. Repeat the cleaning process as needed until the transport path is free of contaminants. Do not use alcohol or thinner for cleaning. Dirty lenses Dirty roller After cleaning After cleaning

8 UBA --SS Integration Guide June 9, Operational Flowchart: Power Up Initialization C Idling Acceptance Inhibited? LED ON LED OFF Bill Inserted? D Bill taken Bill centered Bill transported Collecting bill data Transport stops Bill validation OK? Disabled bill? Validation retries done twice? Vend code output * Stack command received? Reverse bill transport E Bill rejection D A

9 UBA--SS Integration Guide June 9, 00 A Bill Transport Transported to stacker OK? PB unit rotation Acceptance retried twice? PB unit operation defect? A Vend signal output Bill Stacking Operation Stops Abnormal Signal Output * Stacker Full Detected? C Operation Stops Stackerfull Signal Output * *: When the bill validation is NG, bill is rejected and then automatically inserted again for second validation. Altogether the bill acceptor tries to revalidate the bill times at maximum. *: When abnormal signal is detected, remove the cause of failure and power up again, or send reset command to bill acceptor. *: When stackerfull signal is detected, take out bills from cash box, and re-install the box in position. The unit will initializes itself automatically. 9

10 UBA --SS Integration Guide June 9, 00. Clearing Bill Jam: When a bill is jammed near the acceptor's entrance, pull the tab on top of the acceptor to open the cover of acceptor unit. Remove the jammed bill. When a bill is jammed near the cash box entrance, pull the box handle to take out the cash box from frame. Remove the jammed bill.. Technical Support: - Americas & Oceania - JCM American Corporation Phone: Fax: Pilot Road, Las Vegas, NV 99 customersurvice@jcm-american.com U.S.A. Website: - Europe, Russia, Middle East, Africa - Japan Cash Machine Germany GmbH Phone: Fax: Mündelheimer Weg 0 support@jcm-germany.com Website: D-0 Düsseldorf Germany - UK & Ireland - JCM United Kingdom Ltd. Phone: +-(0)0-0- Fax: + (0) 90-- Unit B, Third Avenue, info@jcm-uk.com Website: Denbigh West Business Park Bletchley, Milton Keynes, Buckinghamshire MK EJ, UK - Asia - JCM Gold (HK) Ltd. Phone: +-9- Fax: Unit -, /F., Favor Industrial Centre cs@jcmgold.com.hk Website: - Kin Hong Street, Kwai Chung, N.T. Hong Kong 0

11 UBA--SS Integration Guide June 9, 00. Input/Output Circuits: External Connector Interface Circuit HPZ0A 0ohm /W 0ohm K 0 LS0.K VHC VHC 9 9 V 0.uF /W 0ohm.K 00ohm 00pF VHC VHC LS0 K 0.uF D.V D.V 0 Vbus Tron D- D+ XIN XOUT TEST Dack Dreq Dack0 Dreq0 TC INT VCC GND VCC GND IO VCC IO VCC GND RES CS RD LWR INT0 HWR A A 0 A 9 A A A 0 A0 9 P P P P P P P0 0 D 9 D D D D D D D0 9 9 PC00 LS0 K.k SN0 0.uF 00ohm 00pF 0.K 00ohm VHC GND GND A G B D S.K /W.K D SS V (POWER) GND (POWER) MRESET PC OUT V (PC) PC IN GND (PC) Vbus -DATA +DATA O-TTL GND (USB) GND (TTL) LED POWER I-TTL I-TTL I-TTL O-TTL O-TTL V (POWER) GND (POWER) MRESET PC OUT V (PC) PC IN GND (PC) Vbus -DATA +DATA O-TTL GND (USB) GND (TTL) LED POWER I-TTL I-TTL I-TTL O-TTL O-TTL.K SS 0.uF PC00 PC /W.K SS 0.uF VHC VHC VHC LS0 TXD0 V PW GND LED POWER LED LS0 0ohm k k 0.uf.K ohm CS0.0MHz pf pf ohm k k k 0.uf 0.uf 0.uf ohm N 0.uf N9GP 0.uf VHC VHC k 9

12 UBA --SS Integration Guide June 9, 00 Faceplate LED Lightning Control Circuit Faceplate Side (Reference) Acceptor Side V V V V PW GND PW GND LED POWER LED POWER LED LED 0.uF /W 0Ω LS0 Optional Conversion Board Interface Circuit VCC C+ V+ C- V- C+ GND C- 0 9

13 UBA--SS Integration Guide June 9, 00. LED Diagnostic Codes Malfunction Errors. of RED LED Flash x x x x x x x x x x x x x x x 9 x 0 x x x x x GREEN LED Status Failure Description Boot ROM error Incorrect contents of external ROM/Eempty program program in external ROM (Flash ROM) Internal RAM error External RAM error External Boot ROM error Download file error (Download did not complete successfully.) Cash box full Stacker pusher mechanism fault Transport jam () Transport jam () Stacker encoder signal fault Jam in acceptor Feed motor speed too fast or too slow Needs sensor adjustment Transport motor fault PB Unit Fault Cash box not seated or not present Cheated Centering mechanism solenoid fault Centering mechanism fault ICB Failure Description ICB Setting Error (Failure 0) ICB Box Communication Error (Failure 0) ICB Box Check Sum Error (Failure 0) ICB Box installed in another machine (Failure 0) ICB Box data retrieved without initialization (Failure 09) Reject Errors RED LED Status. of GREEN LED Flash x x x x x x x x x 9 x 0 x x x x x Failure Description Slant insertion Magnetic sensor pattern error Paper detected inside acceptor at standby Optical sensor error Bill feed error Bill identification error Optical sensor error Optical sensor error Inhibited Bill Return Bill Bill feed error Bill length error Optical sensor error Optical sensor error

14 UBA --SS Integration Guide June 9, CENTERING GUIDE OPEN Outline Dimensions UBA--SS Complete Unit. -M -M. NOTES: All dimensions shown are for reference purpose and are subject to manufacturing & assembly tolerances. All dimensions shown are in mm unless otherwise indicated. -.!!

15 UBA--SS Integration Guide June 9, UBA--SS Complete Unit with UBA Standard Faceplate R. R0... JCM CENTERING GUIDE OPEN -M R NOTES: All dimensions shown are for reference purpose and are subject to manufacturing & assembly tolerances. All dimensions shown are in mm unless otherwise indicated.!!

16 UBA --SS Integration Guide June 9, 00 Plastic Cash Box UBA CASHBOX (without ICB) Dimensions NOTES:! All dimensions shown are for reference purpose and are subject to manufacturing & assembly tolerances.! All dimensions shown are in mm unless otherwise indicated () UBA CASHBOX (with ICB) Dimensions NOTES:! All dimensions shown are for reference purpose and are subject to manufacturing & assembly tolerances.! All dimensions shown are in mm unless otherwise indicated (0)