Universal Bill Acceptor UBA-10/11/12-SS Integration Guide

Transcription

1 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition Universal Bill Acceptor UBA-0//-SS Integration Guide Component Names Acceptor Unit USB for Software Download Dip Switch Faceplate Connector Transport Unit Release Lever Diagnostic LEDs Cash Box External Connector Frame Unit

2 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition. Model Descriptions: The UBA model descriptions are structured to define the major components as shown below. MODEL TYPE SOFTWARE U B A - 0 S S F 0 U S A 0 () () () (4)(5) (6) (7) (8) (9) (0) ()()() (4) (5) () Series Name () CPU board type 0: 8Mbit Flash Rom : 8Mbit EPROM : 6Mbit Flash Rom () Stacking configuration SS: Security stacker (4) Box capacity 5: 500 notes (5) Box color 0: Black (plastic) S: WBA Box (steel) (6) Box handle color 0: Blue (standard) : Red N: WBA BOX without Handle J: WBA BOX with standard Handle (7) Transport unit type 0: UBA Standard Type (5.0V Flash ROM) :.V Flash ROM Type (8) Transport unit cover color 0: Blue (standard) (9) Faceplate 0: W/o faceplate : W/ UBA standard faceplate : W/ Blue/Blue LED A: W/ Blue/Blue LED (-line) (0) Intelligent cash box 0: W/o ICB board and ICB box : W/ ICB board and ICB box : W/ ICB board and w/o ICB box () Optional board 0: Standard (no external I/F board) : With 4V/.5V + RSC I/F Conversion Board : cctalk I/F Conversion Board () Input/Output signals F: Photo-coupler Isolation R: RS-C () External Connection 0: Without Harness Harness : Standard Harness : OEM Harness : DC4V/DC.5V Conversion Harness (Photo-coupler) 4: DC4V/DC.5V Conversion Harness (RS-C) (4) Country Code ISO66 based -digit code (5) Interface 0: JCM ID-00 Serial Interface 4: OEM Interface. Technical Specifications: ) Acceptance Rate: Refer to Software Specifications* ) Bills Accepted: Width: 6 85mm, Length: 0 65mm (up to 70mm with WBA steel cash box) ) Processing Speed: Approx. sec. to send credit signal, 5 sec. to send vend signal. 4) Escrow: bill 5) Anti-stringing Mech.: PB mechanism (anti-pullback system JCM Patented) 6) Cash Box Capacity: 500 notes or more 7) Interface: ID-00 JCM Standard Serial Interface (Ask JCM for the communication specifications) Contact JCM for other I/F. 8) Weight: Approx. 4.0kg (*) The following bills are excluded: - Bills with excessive or sparse magnetism, or unclear printing patterns. - Overlapped bills - Bill with stain, wear, wetness, tear or excessive wrinkles - Bill with folded corner or edge - Bill with incorrect cut dimensions or printing displacement When security measure against counterfeit is implemented, the software may not fulfill the specified level of acceptance rate.. Environment: ) Operation temperature: 5 to +50ºC ) Storage temperature: -0 to +60ºC ) Relative humidity: 0 to 85%RH (non-condensed) 4. Electrical Supply: ) Supply voltage: DCV ± 5% (NOTE: Use power supply with 4.0A or more) DC4V ± 5% (NOTE: Use power supply with.7a or more) - Only when used the Optional DC4V/DC.5V Conversion Board - ) Current consumption: DCV :Standby 00mA, In operation.6a DC4V :Standby 50mA, In operation.0a

3 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition 5. Installation [Down Stacking Only]: ) Remove power from host machine. ) Set UBA dip switches, if required. The initial setting is all OFF where all the denominations are enabled. ) Connect the proper interface harness from the host machine to UBA. 4) Install the UBA into the host machine as shown below. There are 4 mounting holes on the rear frame and each on the both sides of the frame. Pan Head Screw M4 Less than 4mm deep M4 Plate Head Screw or No. 6- Plate Head Inch Screw Side Mounting Back-to-back Mounting 5) Apply power to the machine, verify that the red chip LED next to the dip switch is ON, and both red and green indicator LEDs are OFF. - If the red chip LED is OFF, check connections and make sure power is applied. - If any of the indicator LEDs are ON, check error codes to fix the problem. Check operation, insert banknotes of each denomination to verify that notes are accepted and credited properly in the host machine. 6. DIP Switch Configuration: Default setting (all OFF) Front of UBA panel OFF *Example of DIP Switch functions (ID-00 I/F, US$ software) ON OFF Switch Bar coupon disabled Bar coupon enabled Switch $ disabled $ enabled Switch $5 disabled $5 enabled Switch 4 $0 disabled $0 enabled Switch 5 $0 disabled $0 enabled Switch 6 $50 disabled $50 enabled Switch 7 $00 disabled $00 enabled Switch 8 TEST MODE NORMAL MODE

4 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition 7. Connectors and Pin Assignment: External connector Socket: DRA-0PC-FO (JAE) Contact: D0--6P-0000 (JAE) Mating Connector Socket: DRA-0SC-FO (JAE) Contact: D0--6S-0000 (JAE) Pin No Signal Name +V POWER GND POWER M.RES PC/RSC OUT +V I/F PC/RSC IN GND I/F (TTL) (TTL) (TTL) (TTL) (TTL) GND LED Power (TTL4) (TTL5) (TTL) LED- (TTL4) (TTL5) I/O IN OUT IN (IN) (OUT) (IN) (OUT) (IN) (IN) (IN) (OUT) (OUT) (OUT) Jumper Settings of Photo-coupler isolation or RS-C There are jumper switches on the UBA CPU board. Depending on the interface, set the jumper switch as shown below. (a) Photo-coupler Isolation (b) RS-C Shorted = Function DC +V power DC 0V power Bill acceptor reset signal line Signal output line from Acceptor to Controller Interface Power: DC +V Signal input line from Controller to Acceptor Interface power: photo-coupler DC 0V Reserved (TTL) Reserved (TTL) Reserved (TTL) Reserved (TTL) Reserved (TTL) Interface power: RSC DC 0V LED drive line - anode Reserved (TTL4) Reserved (TTL5) Reserved (TTL) LED Drive Line - cathode / TTL4 Reserved (TTL5) (TTL6) (OUT) Reserved (TTL6) - I/O (input/output) is the term from bill acceptor's side. - Signal name, I/O, and function without parenthesis are for ID-00 interface Jumpers % 5Volt CPU Board 4

5 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition 8. Optional Conversion Board and Harness: The Optional Conversion Board can be attached to the UBA unit. Two types of the optional conversion board are available for UBA-0// unit A-0 (EDP#: 467) (EDP#: 64) DC4V/DC.5V and RS-C Signal Level Conversion Board This board will allow you to convert DC4V to DC.5V and communicate with RS-C Interface. cctalk I/F Conversion Board This board will allow you to communicate with cctalk Interface - When installing the optional conversion board to the UBA unit, set the jumper switch on the CPU board to photo-coupler setting regardless of the interface. For the jumper switch setting, refer to the page 4. Installing the optional conversion board ) Press down the front latche and slide the UBA s acceptor unit forward. Acceptor Unit Front Latch ) Place the optional conversion board and insert the M.6x6 Bind P Tight screws into two () insertion slots. Use a screw driver to tighten such attachment screws and secure the board in place. Optional Conversion Board M.6x6 Bind P Tight Screws 5

6 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition DC4V/DC.5V and RS-C signal level Conversion board and RS-C signal Conversion Board Two types of combination kit are available. Board Harness DC4V/DC.5V and RS-C signal level conversion board (Part#: A-0, EDP#: 467) RS-C I/F harness with Mx W sems screw and clamp (Part#: , EDP#: 476) UBA 4V/RS-C Board + RS-C Harness Kit (EDP#: 00) Photo-coupler I/F harness with Mx sems screw and clamp (Part#: , EDP#:478) UBA 4V/RS-C Board + Photo-coupler Harness Kit (EDP#: 5) JCM s Communication Harness Prepare the harness as nessesary Gaming Machine V (.5V) Output Line TTL Level Communication Line External Reset Signal Line DC4V/V + RS-C, RS-C Conversion Board Removable Connector UBA 4V, V CN CPU Board Relay Connector 4V/.5V Conversion DC/DC Converter * RS-C Conversion IC CN CN RS-C Communication Line External Reset Signal Line * CN USB Connector (A Type) USB Communication Line Photo-Coupler Communication Line * External Reset Signal Line * Interface Connector * The 4V/.5V Conversion DC/DC Converter is NOT mounted on A-0 board. * For harness. * For harness. CN Connector Connector Pin No. Signal Name MRESET TXD 4 RXD 4 GND (I/F) Header: (JAPAN MOLEX) Header Contact: (JAPAN MOLEX) Houseing: (JAPAN MOLEX) Recommended Wire: UL007 AWG#4 to 6 Relay Connector Connector Pin No. Signal Name 4V V 4 GND Header: (JAPAN MOLEX) Header Contact: (JAPAN MOLEX) or (USA MOLEX) Housing: (JAPAN MOLEX) Housing Contact: (JAPAN MOLEX) Recommended Wire: UL007 AWG#4 to 6 6

7 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition cctalk I/F Conversion Board JCM s Communication Harness (40-05-) Gaming Machine V Output Line External Reset Signal Line TTL Level Communication line cctalk I/F Conversion Board UBA CPU Board CN External Reset Signal Line V cctalk Communication Line CN Removable Connector Interface Connector CN Connector Connector Pin No. Signal Name V GND V 9 4 GND 5 TXD 6 RXD 0 7 cctalk (+) 8 cctalk (-) 9 RESET 0 RESET Header: S0B-PHDSS(LF, SN) (Nishiuchi) Housing: PHDR-0VS (JST) Housing Contact: SPHD-00I-P0.5 (JST) Recommended Wire: UL06 AWG#6 7

8 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition 9. Maintenance: It is important to keep the bill path, rollers, and belts clean. The sensor lenses are transparent, and made of polymer material. Handle them with care. Use a soft lint-free cloth or cotton bud to wipe out dirt and stain on the surface of magnetic and optical sensors, rollers and belts. Repeat the cleaning process as needed until the transport path is free of contaminants. Do not use alcohol or thinner for cleaning. Dirty lenses Dirty roller After cleaning After cleaning 0. Technical Support - Americas & Oceania - JCM American Corporation Phone: Fax: Pilot Road, Las Vegas, NV customersurvice@jcm-american.com U.S.A. Website: - Europe, Russia, Middle East, Africa - Japan Cash Machine Germany GmbH Phone: Fax: Mündelheimer Weg 60 support@jcm-germany.com Website: D-4047 Düsseldorf Germany - UK & Ireland - JCM United Kingdom Ltd. Phone: +44-(0) Fax: +44 (0) Unit B, Third Avenue, info@jcm-uk.com Website: Denbigh West Business Park Bletchley, Milton Keynes, Buckinghamshire MK EJ, UK - Asia - JCM Gold (HK) Ltd. Phone: Fax: Unit -7, /F., Favor Industrial Centre cs@jcmgold.com.hk Website: -6 Kin Hong Street, Kwai Chung, N.T. Hong Kong 8

9 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition. Operational Flowchart: Power Up Initialization C Idling No Acceptance Inhibited? LED ON LED OFF Bill Inserted? No D Bill taken Bill centered Bill transported Collecting bill data Transport stops Bill validation OK? No No Disabled bill? Validation retries done twice? Vend code output * Stack command received? No Reverse bill transport E Bill rejection D A 9

10 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition A Bill Transport Transported to stacker OK? No PB unit rotation Acceptance retried twice? No PB unit operation defect? A No Vend signal output Bill Stacking Stacker Full Detected? Operation Stops Abnormal Signal Output * No C Operation Stops Stackerfull Signal Output * *: When the bill validation is NG, bill is rejected and then automatically inserted again for second validation. Altogether the bill acceptor tries to revalidate the bill times at maximum. *: When abnormal signal is detected, remove the cause of failure and power up again, or send reset command to bill acceptor. *: When stackerfull signal is detected, take out bills from cash box, and re-install the box in position. The unit will initializes itself automatically. 0

11 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition. Clearing Bill Jam: When a bill is jammed near the acceptor's entrance, pull the tab on top of the acceptor to open the cover of acceptor unit. Remove the jammed bill. When a bill is jammed near the cash box entrance, pull the box handle to take out the cash box from frame. Remove the jammed bill.

12 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition. Interface Circuits: External Connector Interface Circuit -Photo-Coupler- Controller Side (Reference) Acceptor Side V V (POWER) GND (POWER) MRESET PC/RSC OUT V V (PC) PC/RSC IN GND (PC) V (POWER) GND (POWER) MRESET PC/RSC OUT V (PC) PC/RSC IN GND (PC) V JP XJ8B-0.K SS5 SS5 0.uF.K SS5 JP XJ8B-0 PC57 PC400 PC400 K 0.uF 74LS07 74HC744 JP XJ8B-0 K K

13 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition External Connector Interface Circuit -RS-C- Controller Side (Reference) Acceptor Side C+ C- C+ C- VCC V+ V- GND V V V (POWER) GND (POWER) MRESET PC/RSC OUT V (PC) PC/RSC IN GND (PC) V (POWER) GND (POWER) MRESET PC/RSC OUT V (PC) PC/RSC IN GND (PC) GND (RSC) V JP XJ8B-0 JP XJ8B-0.K 0.uF SS5 0.uF 0.uF PC57 VCC V+ C+ C- V- GND C+ C- K 0.047uF 0.uF 74LS07 JP XJ8B-0 K K

14 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition Faceplate LED Lightning Control Circuit Faceplate Side (Reference) Acceptor Side V V V PW GND LED POWER LED V PW GND LED POWER LED uF /8W 0Ω 74LS07 Optional Conversion Board Interface Circuit VCC C+ V+ C- V- C+ GND C

15 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition 4. LED Diagnostic Codes: Malfunction Errors No. of RED LED Flash GREEN LED Status Failure Description ICB Failure Description x Boot ROM error x Incorrect contents of external ROM/Eempty program No program in external ROM (Flash ROM) x Internal RAM error x 4 External RAM error x 6 Download file error (Download did not complete successfully.) x Cash box full x Stacker pusher mechanism fault Transport jam () x Transport jam () x 4 Stacker encoder signal fault Jam in acceptor x 5 Feed motor speed too fast or too slow Needs sensor adjustment x 6 Transport motor fault x 7 Reserved x 8 Reserved x 9 PB Unit Fault x 0 Cash box not seated or not present ICB Setting Error (Failure 0) x Reserved ICB Box Communication Error (Failure 0) x Cheated ICB Box Check Sum Error (Failure 07) x Centering mechanism solenoid fault ICB Box installed in another machine (Failure 08) x 4 Centering mechanism fault ICB Box data retrieved without initialization (Failure 09) x 5 Reserved Reject Errors RED LED Status No. of GREEN LED Flash Failure Description x Slant insertion x x x 4 x 5 x 6 x 7 x 8 x 9 x 0 x x x x 4 x 5 Magnetic sensor pattern error Paper detected inside acceptor at standby Optical sensor error Bill feed error Bill identification error Optical sensor error Optical sensor error Inhibited Bill Return Bill Reserved Bill feed error Bill length error Optical sensor error 4 Optical sensor error 5 5

16 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition CENTERING GUIDE OPEN Outline Dimensions:.5 UBA-X-SS Complete Unit -M 6-M NOTES: All dimensions shown are for reference purpose and are subject to manufacturing & assembly tolerances. All dimensions shown are in mm unless otherwise indicated !!

17 UBA-X-SS Integration Guide Aug. 8, 007 0th Edition UBA-X-SS Complete Unit with UBA Standard Faceplate R. R JCM CENTERING GUIDE OPEN 6-M R NOTES: All dimensions shown are for reference purpose and are subject to manufacturing & assembly tolerances. All dimensions shown are in mm unless otherwise indicated.!! 7

18 UBA -X-SS Integration Guide Aug. 8, 007 0th Edition Plastic Cash Box UBA CASHBOX (without ICB) Dimensions NOTES:! All dimensions shown are for reference purpose and are subject to manufacturing & assembly tolerances.! All dimensions shown are in mm unless otherwise indicated (5) 6 UBA CASHBOX (with ICB) Dimensions NOTES:! All dimensions shown are for reference purpose and are subject to manufacturing & assembly tolerances.! All dimensions shown are in mm unless otherwise indicated (0) 6 8