VCE Vblock Specialized Systems for Extreme Applications. Gen 2.1 Physical Planning Guide

Transcription

1 VCE Vblock Specialized Systems for Extreme Applications Gen 2.1 Physical Planning Guide Version 1.3 May 2015

2 Revision History Date Vblock System Document revision Description of changes May 2015 Gen Added environmental information for the EMC VNXe 3150 and EMC VNXe 3300 Combined power, heat, and physical specifications in a single table December 2014 Gen Added EMC XtremIO support shelf information Updated cabinet elevations April 2014 Gen Terminology changes and updates to cabinet elevations February 2014 Gen Initial release Revision History 2

3 Contents Introduction...4 Accessing VCE documentation...5 Cabinet and power specifications...6 Cabinet specifications... 6 Cabinet floor cutouts... 7 POU specifications... 9 Europe... 9 Japan North America...12 Component and environmental specifications...13 Cisco and EMC component specifications...13 Environmental requirements...15 Sample configurations Cabinet specifications for sample configurations Sample single cabinet configuration...17 Sample dual cabinet configuration Reference materials Contents

4 Introduction This document provides the information required for planning the installation of a Vblock Specialized Systems for Extreme Applications at a customer site. The target audience for this document includes VCE field personnel and partners who assist customers in planning their data center requirements. Use this document in conjunction with the VCE Vblock Systems Site Survey. The data provided in this document is for reference only. For the most current product specifications, refer to the manufacturer s documentation. The VCE Glossary defines terms and acronyms that are related to Vblock Systems. To suggest documentation changes and provide feedback on this guide, send an to docfeedback@vce.com. Include the name of this guide, the topic name where your comment applies, and your feedback. Introduction 4

5 Accessing VCE documentation Select the documentation resource that applies to your role. Role Customer VCE Partner Cisco, EMC, VCE, or VMware employee VCE employee Resource support.vce.com A valid username and password are required. Click VCE Download Center to access the technical documentation. partner.vce.com A valid username and password are required. portal.vce.com sales.vce.com/saleslibrary or vblockproductdocs.ent.vce.com 5 Accessing VCE documentation

6 Cabinet and power specifications Cabinet specifications Cabinet specifications provide Vblock System cabinet dimensions and weight information. The cabinets come with locking front and back cabinet doors. Keys are shipped attached with cable ties to the front door and can be used for both the front and back doors. Cabinets are shipped with two side panels. The cabinets are designed to be built contiguously and bolted together. Because of this, there is no need for side panels between the cabinets. VCE does not encourage customers to put space between cabinets, because this requires an extended lead time on the order. The cross-cabinet connections would not reach, and custom cables would need to be ordered. The Vblock Specialized Systems for Extreme Applications uses Panduit NetSERV cabinets. The customized cabinet displays the VCE logo, provides a customized cable management system, and includes casters. Panduit performs extensive testing to ensure the casters can support the cabinet weight and up to 2,000 lb (907 kg) of equipment. Seismic brackets are included automatically in the Panduit rack kit. The cabinets are rated at a seismic zone 3 with 1,102 lb (500 kg) of installed equipment inside. In addition, the pallets used to ship VSS XAPP cabinets are specifically engineered to withstand the added weight of components shipped in the cabinet. Base cabinet dimensions The following illustration shows the VSS XAPP base cabinet dimensions. The Vblock System cabinet height including the casters is 6 feet 8 in. (2,026 mm). The illustration shows the height without the casters. Cabinet and power specifications 6

7 Cabinet specifications with no equipment loaded The following cabinet specifications are for an empty VSS XAPP cabinet. Measure Total shipping weight Floor footprint Cabinet weight Air space Packaged dimensions Packaged cabinet height Specification 667 lb (303 kg) based on the following weights: Cabinet = 386 lb (175 kg) Pallet = 137 lb (62.14 kg) Two side panels = 100 lb (43.45 kg) Packaging = 44 lb (19.95 kg) in. (700 mm) wide x in. (1,200 mm) deep (for general sizing, use 28 in. wide x 48 in. deep) 386 lb (175 kg) without side panels 486 lb (220 kg) with side panels in. wide x 50.7 in. deep x in. tall ( x 1, x 2, mm) 42.0 in. wide x 56.0 in. deep x 86.0 in. tall (1,068 x 1,424.4 x mm) in. (2,178 mm) The cabinet weight does not include the 1RU, 20 lb (9.07 kg) support shelf that might be required for an EMC XtremIO controller. All controllers in a cabinet do not require a support shelf. The following table lists the number of shelves that are required for each EMC XtremIO cluster size. Cluster size Shelves per cluster Total additional weight One EMC XtremIO cluster 2 40 lb (18.14 kg) Two EMC XtremIO clusters 3 60 lb (27.22 kg) Cabinet floor cutouts Cabinet floor cutouts provide floor specifications required prior to the installation of a Vblock System. The floor cutout shows how the cabinet doors open, how much clearance is required for the front and back doors, and where the cable drop holes should be located in the floor tile. This is a standard configuration floor layout, 28 in. (700 mm) wide x 48 in. (1,200 mm) deep. The floor mounting positions shown are when casters or levelers are used (using anti-tip brackets). Equipment rail spacing is factory set. 7 Cabinet and power specifications

8 Base cabinet floor cutout Cabinet and power specifications 8

9 Network cabinet floor cutout The network cabinet has a finger cable management area in the front of the cabinet as shown: POU specifications These topics provide specifications for the power outlet units (POUs) for different regions. The VCE Vblock System Data Protection Guide provides information about available data protection solutions. Europe This topic provides specifications for the POUs for Europe. Panduit full-height POUs weigh 17 lb (7.7 kg). The half-height POUs weigh 8.8 lb (4 kg). 9 Cabinet and power specifications

10 The largest power cord plug is approximately 4 x 4 in. (2,839 x 2,839 mm). Customer input feed Panduit part number Maximum per cabinet Plug / Receptacle Description Three-phase Wye 32 A 230/ 400 V QZ1D2P6BM30P A, 230/400 V x 3~ Wye 4P/5W IEC 60309, Splash proof 24 receptacles 15 A, IEC 60320/C13 6 receptacles 20 A, 250 V Straight blade IEC 60320/C19 Three-phase Wye 32 A 230/ 400 V QZ1D2P3BN24Z A, 230/400 V x 3~ Wye 4P/5W IEC 60309, Splash proof 12 receptacles 10 A, IEC 60320/C13 12 receptacles 16 A, IEC 60320/C19 Three-phase Wye 16 A 230/ 400 V QZ1D2Q0BA30P A, 230/400 V x 3~ Wye 4P/5W IEC 60309, Splash proof 24 receptacles 10 A, IEC 60320/C13 6 receptacles 16 A, 250 V Straight blade IEC 60320/C19 Single-phase 32 A 230 V (half-height) QN1D2B2BN0861 (master) 2 (master) 4 (slave) 32 A, 250 V, Singlephase, 2P/3W, IEC 60309, Splash proof QD0D2B2BN0861 (slave) 6 receptacles 10 A, 250 V Straight blade IEC 60320/C13 2 receptacles 16 A, 250 V Straight blade IEC 60320/C19 Japan This topic provides specifications for the POUs for Japan. Cabinet and power specifications 10

11 Panduit full-height POUs weigh 17 lbs (7.7 kg). The half-height POUs weigh 8.8 lbs (4 kg). The largest power cord plug is approximately 4 x 4 in. (2,839 x 2,839 mm). Customer input feed Panduit part number Maximum per cabinet Plug / Receptacle Description Three-phase Delta 30 A 208 V QZ1B1N3BN30P1J 4 30 A, 250V x 3~ Delta Twist lock JIS C8303 L15-30P 24 receptacles 15 A, IEC 60320/C13 6 receptacles 20 A, IEC 60320/C19 Single-phase 30 A 208 V (half-height) QN1B1L2BN0861J (master) QD0B1L2BN0861J (slave) 2 (master) 4 (slave) 30 A, 250 V, Singlephase Twist lock JIS C8303 L6-30P 6 receptacles 15 A, IEC 60320/C13 2 receptacles 20 A, IEC 60320/C19 Three-phase Delta 60 A 208 V QZ1B2G6BN24R1J 2 60 A, 250V x 3~ Delta Twist lock JIS C8303 L15-30P 3P/4W IEC 60309, Splash proof 18 receptacles 15 A, IEC 60320/C13 6 receptacles 20 A, IEC 60320/C19 Single-phase 60 A 208 V QZ1B2C3BN30P1J 4 60 A, 250V, Singlephase 2P/3W IEC 60309, Splash proof 24 receptacles 15 A, IEC 60320/C13 6 receptacles 20 A, IEC 60320/C19 11 Cabinet and power specifications

12 North America This topic provides specifications for the POUs for North America. Panduit full-height POUs weigh 17 lbs (7.7 kg). The half-height POUs weigh 8.8 lbs (4 kg). The largest power cord plug is approximately 4 x 4 in. (2,839 x 2,839 mm). Customer input feed Panduit part number Maximum per cabinet Plug / Receptacle Description Three-phase Delta 30 A 208 V QZ1B1N3BN30P A, 250 V x 3~ Delta Twist lock NEMA L15-30P 24 receptacles 15 A, IEC 60320/C13 6 receptacles 20 A, IEC 60320/C19 Single-phase 30 A 208 V (half-height) QN1B1L2BN0861 (master) QD0B1L2BN0861 (slave) 2 (master) 4 (slave) Single-phase, 30 A, 250V Twist lock NEMA L6-30P 6 receptacles 15 A, IEC 60320/C13 2 receptacles 20 A, IEC 60320/C19 Three-phase Delta 60 A 208 V QZ1B2G6BN24R A, 250 V x 3~ Delta 3P/4W IEC 60309, Splash proof 18 receptacles 15 A, IEC 60320/C13 6 receptacles 20 A, IEC 60320/C19 Three-phase Delta 60 A 208 V QZ1B2G6BN24Z A, 250 V x 3~ Delta 3P/4W IEC 60309, Splash proof 12 receptacles 15 A, IEC 60320/C13 Cabinet and power specifications 12

13 Customer input feed Panduit part number Maximum per cabinet Plug / Receptacle Description 12 receptacles 20 A, IEC 60320/C19 Single-phase 60 A 208 V QZ1B2C3BN30P1 4 Single-phase, 60 A, 250 V 2P/3W IEC 60309, Splash proof 24 receptacles 15 A, IEC 60320/C13 6 receptacles 20 A, IEC 60320/C19 Component and environmental specifications EMC component specifications This topic provides the specifications for EMC components that might be in a VSS XAPP. Model Maximum power (W) Maximum thermal (BTU/hr) Airflow ft³/min (assumes 150 cfm per Kwh) Maximum weight Rack units Depth 1 EMC XtremIO (1- cabinet configuration) 2 EMC XtremIO cluster (2- cabinet configuration) EMC XtremIO Storage Controller (SC) EMC XtremIO Disk Array Enclosure (DAE) EMC XtremIO Battery Backup Unit (BBU) 750 2, lb. (562.5 kg) 1,726 5, lb. (768.9 kg) 300 N/A N/A 40.0 lb. (18.1 kg) 1,130 3, lb. (18.1 kg) N/A N/A N/A 45.0 lb. (20.4 kg) in. (43.8 cm) in. (43.8 cm) in. (70.9 cm) in. (33.0 cm) in. (55.6 cm) 13 Cabinet and power specifications

14 Model Maximum power (W) Maximum thermal (BTU/hr) Airflow ft³/min (assumes 150 cfm per Kwh) Maximum weight Rack units Depth EMC XtremIO Infiniband Switch EMC VNXe 3150 Processor Enclosure (3.5 in. drives) EMC VNXe 3150 Processor Enclosure (2.5 in. drives) EMC VNXe 3150 Expansion Enclosure (3.5 in. drives) EMC VNXe 3300 Processor Enclosure (3.5 in. drives) EMC VNXe 3300 Processor Enclosure (2.5 in. drives) EMC VNXe 3300 Expansion Enclosure (3.5 in. drives) EMC VNXe 3300 Expansion Enclosure (2.5 in. drives) lb. (9.3 kg) lb. (26.4 kg) lb. (21.8 kg) lb. (23.6 kg) 480 1, lb. (43.8 kg) 480 1, lb. (33.3 kg) 480 1, lb. (32.66 kg) 480 1, lb. (17.4 kg) in. (62.7 cm) 2 20 in. (50.8 cm) 2 17 in. (43.18 cm) 2 20 in. (50.8 cm) in. (60.96 cm) in. (54.0 cm) in. (35.56 cm) in. (33.02 cm) Shipping weights To determine the total shipping weight for a particular VSS XAPP, add the packing materials and other components as specified in the cabinet specifications. Cabinet and power specifications 14

15 Environmental requirements The operating temperature, relative humidity, and altitude specifications are shown in the table below. Requirement Operating temperature Relative humidity Operating environment F (10 32 C) at 80% load 20 80% (non-condensing) Altitude ft. ( m) 15 Cabinet and power specifications

16 Sample configurations Cabinet specifications for sample configurations Sample power, thermal, and weight requirements for each cabinet in a sample VSS XAPP with a single and dual-cabinet configuration. This data is for reference only and will vary based on each specific configuration. Shipping weights To determine the total shipping weight for a particular VSS XAPP, add the packing materials and other components as specified in Vblock System cabinet specifications. Sample cabinet specifications: VSS XAPP with a single cabinet configuration The following table provides sample specifications by cabinet. Cabinet Maximum power (W) Maximum thermal (BTU/hr) Weight (lb) Weight (kg) 1 14,146 34,001 1, ,106 27,819 1, ,515 24,260 1, ,515 24,260 1, , Weights include 386 lb (175 kg) for the cabinet and 68 lb (30.8 kg) for the maximum number of full-height POUs per cabinet. Sample cabinet specifications: VSS XAPP with a dual cabinet configuration The following table provides sample specifications by cabinet. Cabinet Maximum power (W) Maximum thermal (BTU/hr) Weight (lb) Weight (kg) 1 13,581 33,762 1, ,306 28,087 1, ,934 22,283 1, Weights include 386 lb (175 kg) for the cabinet and 68 lb (30.8 kg) for the maximum number of full-height POUs per cabinet. Sample configurations 16

17 Sample single cabinet configuration This topic provides elevations for a sample Vblock Specialized Systems for Extreme Applications single cabinet configuration. Cabinet elevations vary based on the specific configuration requirements. These are provided for sample purposes only. For a specific VSS XAPP design, consult your varchitect. VSS XAPP front and rear Sample dual cabinet configuration The topic provides elevations for a sample dual cabinet configuration for the Vblock Specialized Systems for Extreme Applications. Cabinet elevations vary based on the specific configuration requirements. These are provided for sample purposes only. For a specific VSS XAPP design, consult your varchitect. 17 Sample configurations

18 VSS XAPP front and rear Sample configurations 18

19 19 Sample configurations

20 VSS XAPP cabinet 1 Sample configurations 20

21 VSS XAPP cabinet 2 21 Sample configurations

22 VSS XAPP cabinets 1 and 2 front view VSS XAPP cabinets 1 and 2 rear view Sample configurations 22

23 Reference materials Cisco reference materials The calculations in this document are based on information provided by equipment manufacturers. For more information, refer to the manufacturer documentation. Document Cisco Nexus 5000 Series Hardware Installation Guide Cisco Nexus 5548P, 5548UP, 5596UP, and 5596T Switches Data Sheet Cisco Nexus 3000 Series Hardware Installation Guide Cisco Nexus 3064-X, 3064-T, and T Switches Data Sheet Cisco UCS B200 M3 Rack Server Installation and Service Note Cisco UCS 6200 Series Fabric Interconnect Hardware Installation Guide Cisco UCS 6200 Series Fabric Interconnect Data Sheet Cisco UCS 5108 Server Chassis Installation Guide Cisco UCS 5100 Series Chassis Data Sheet Cisco UCS C220 Server Installation and Service Guide Cisco UCS C220 M3 Rack Server Data Sheet Link nexus5000/hw/installation/guide/nexus_5000_hig.html nexus-5000-series-switches/ data_sheet_c html nexus3000/hw/installation/guide/ nexus3000_hardware_install_guide_book.pdf nexus-3000-series-switches/ data_sheet_c html blade-servers/b200m3.html unified_computing/ucs/hw/6200-install-guide/ 6200_HIG.html data_sheet_c html unified_computing/ucs/hw/chassis-install-guide/ ucs5108_install.html data_sheet_c _ps10276_products_data_she et.html C220/install/C220.html %20notes&product_id=31111&resource=DOC_LIB&ct=C MS.CT.0840 EMC reference materials The calculations in this document are based on information provided by equipment manufacturers. For more information, refer to the manufacturer documentation. Document EMC XtremIO Technical Data Sheet Link 23 Reference materials

24 For more information, refer to EMC Online Support at support.emc.com. To calculate power consumption and heat dissipation for a specific storage configuration, refer to the EMC power calculator at powercalculator.emc.com. Panduit reference materials To access the Panduit POU documentation, refer to and search for the part number. For more information, refer to Cabinet and power outlet unit specifications section of this guide and refer to the appropriate section for Europe, Japan, or North America. Reference materials 24

25 The information in this publication is provided "as is." Dell Inc. makes no representations or warranties of any kind with respect to the information in this publication, and specifically disclaims implied warranties of merchantability or fitness for a particular purpose. Use, copying, and distribution of any software described in this publication requires an applicable software license. Copyright Dell Inc. or its subsidiaries. All Rights Reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners. Published in the USA in May Dell EMC believes the information in this document is accurate as of its publication date. The information is subject to change without notice. 25 Copyright