335 台灣桃園縣大溪鎮南興里仁和路二段 255 號英業達股份有限公司 MS. NANCY TSAI

Transcription

1 335 台灣桃園縣大溪鎮南興里仁和路二段 255 號英業達股份有限公司 MS. NANCY TSAI

2 MS. NANCY TSAI INVENTEC CORP 255 JEN-HO RD, SEC 2 NAN-HSIN LI Date: 2013/11/01 TACHI Subscriber: TAOYUAN PartySite: TAIWAN File No: E Project No: 13NB05631 PD No: 13M45589 Type: R PO Number: Subject: Procedure And/Or Report Material The following material resulting from the investigation under the above numbers is enclosed. Issue Date Vol Sec Pages Revised Date X1 Index Page(s) 2013/10/31 X1 A150 Add New Proc/Report Sect Project If there are illegible images in this package, legible images may be found online via MyHome@UL under My UL Reports/CDA. Inspections at your plant will be conducted under the supervision of MARSY MA, UL INSPECTION CENTER TAIPEI, UL INTERNATIONAL SERVICES LTD, 260 DA-YEH RD, 5TH FL, PEITOU, TAIPEI CITY, Taiwan, 112., PHONE: , FAX: , MARSY.MA@TW.UL.COM Please file revised pages and illustrations in place of material of like identity. New material should be filed in its proper numerical order. NOTE: Follow-Up Service Procedure revisions DO NOT include Cover Pages, Test Records and Conclusion Pages. Report revisions DO NOT include Authorization Pages, Indices, Section General Pages and Appendixes. Please review this material and report any inaccuracies to UL's Customer Service Professionals. Contact information for all of UL's global offices can be found at If you d like to receive updated materials FASTER, UL offers electronic access and/or delivery of this material. For more details, contact UL's Customer Service Professionals as shown above. This material is provided on behalf of UL LLC(UL) or any authorized licensee of UL. TPI File UL INSPECTION CENTER 818

3 File Volume Page Date: E Index X Index Product Type Model/Type Reference Report Reference # Server T163R E A1-UL PC server IS-120 E A2-UL Server IB-4200, VEG-4X E A3-UL Server IR2200, IX2200, IR2250x, IR2255x, IR2350x, E A4-UL SG120, SR2042xx, SR2046xx, IX2210 (where x can be 0-9, A-Z, or blank) Storage IB-3100, IX3150 E A5-UL Storage Controller IB-3100C E A6-UL Module Listed Accessory, Server Module: IB-4200-XXX, where X may be any E A7-UL Server Module alphanumeric characters or blank. Server IR1100, IX1100 E A8-UL Server IR2100, SR1072xx (x can be 0-9, A-Z or blank) E A9-UL Server IR1200, IX1200, SR1062xx(x can be 0-9, A-Z or E A11-UL blank) Server IR2150, IR2300, SNPRF 0501, IR1250, ESR0004, E A12-UL SD8001 Server IR3340 E A14-UL Server FortiGate-3000A E A18-UL Server FortiAnalyzer-4000 E A21-UL Server IR2185, IR2188, E-9425R, E-9422R, IR2400, E A25-UL IR2408, Tecal RH1280 Server E-9522R, IR2280, E-9525R, IR2500, Tecal RH2280 E A26-UL Server IS2180, E-9520T E A27-UL Storage SJ1060-OL E A28-UL Server SS2280 E A29-UL Server IR4300 and E-9722R E A30-UL Server IR2900, ESR0003, and Web Security 3000 E A31-UL Appliance Server E-9232T E A32-UL Storage ESS0001 E A33-UL Storage SD7001 E A34-UL Server Secure Internet Gateway 3000, and Web E A35-UL Security Storage ESS0002 E A37-UL Server ESR0007 E A40-UL Server EST0008 E A41-UL Server ESR0010, Relion 650 E A43-UL Server XS23-SB2 E A49-UL Server ESR0011 E A53-UL Server EST0013, XS23-TY, EST0015, XS21-TY E A57-UL Server 9000 Series, CF 5000 Series E A58-UL PCI-E Express SAS 25121, and E A63-UL Raid Adaptor PCI-E SAS HBA E A64-UL Card Server AVx400, Ax1200 (x is 0-9, A-Z or blank), PS12000 E A73-UL and PR10 Accessory PCI-E and E A81-UL Status

4 File Volume Page Date: E Index X Network HBA Card (Host Bus Adaptor Card) Storage DD670, DD860/860g, DD890, DD640 E A85-UL Accessory - PCI-E E A88-UL HBA Card (Host Bus Adaptor Card) Switch LYNX6160, Puma SAS Switch, SAS6160 E A91-UL Switch LYNX6161, SAS6161 E A93-UL Accessory - SAS 25377, 25390, E A95-UL HBA Card (Host Bus Adaptor Card) Accessory - SAS 25366, E A100-UL HBA card (Host Bus Adaptor Card) Accessory - SAS E A103-UL HBA card (Host Bus Adaptor Card) Server K60 E A106-UL Accessory, PCI E A107-UL Express RAID Adapter Accessory, PCI 25421, E A111-UL Express RAID Adapter Server F1D E A117-UL Accessory - SAS E A121-UL HBA card (Host Bus Adaptor Card) SAS Switch MX-B 6240-DC, MX-B 6480-DC E A126-UL SAS Switch MX-B 6240-AC, MX-B 6480-AC E A127-UL Server K900XXXXX(The "X" in the model can be E A128-UL alphanumeric character or blank for marketing purpose and no impact safety related constructions and critical components except for model designation) Accessory, PCI E A132-UL Express RAID Adapter Accessory, PCI E A134-UL Express RAID Adapter Accessory, PCI E A136-UL Express RAID Adapter Accessory, PCI E A139-UL Express RAID Adapter Accessory, PCI E A142-UL Express RAID Adapter Accessory, PCI E A146-UL Express RAID Adapter Accessory, PCI E A150-UL

5 File Volume Page Date: E Index X Express RAID Adapter

6 Issue Date: Page 1 of 7 Report Reference # E A150-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL , 2nd Edition, (Information Technology Equipment - Safety - Part 1: General Requirements) CSA C22.2 No , 2nd Edition, (Information Technology Equipment - Safety - Part 1: General Requirements) Listing NWGQ, NWGQ7 (Information Technology Equipment Including Electrical Business Equipment) Product: Accessory, PCI Express RAID Adapter Model: Rating: N/A Applicant Name and Address: INVENTEC CORP 349 JEN-HO RD SEC 2 TACHI TAOYUAN HSIEN 335 TAIWAN This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the Follow- Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure. The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. Prepared by: Neil Lin Reviewed by: Stephen Huang Copyright 2013

7 Issue Date: Page 2 of 7 Report Reference # E A150-UL Supporting Documentation The following documents located at the beginning of this Procedure supplement the requirements of this Test Report: A. Authorization - The Authorization page may include additional Factory Identification Code markings. B. Generic Inspection Instructions - i. Part AC details important information which may be applicable to products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of this Test Report. ii. Part AE details any requirements which may be applicable to all products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of each Test Report. iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical standard used to investigate these products. Products are permitted to bear only the Certification Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report. Product Description Electronic components were mounted on PWB and supplied by SELV via the end-use Server's main board. Model Differences N/A Technical Considerations Equipment mobility : for building-in Connection to the mains : N/A Operating condition : continuous Access location : N/A Over voltage category (OVC) : N/A Mains supply tolerance (%) or absolute mains supply values : No direct connection Tested for IT power systems : No IT testing, phase-phase voltage (V) : N/A Class of equipment : Class III (supplied by SELV) Considered current rating of protective device as part of the building installation (A) : N/A Pollution degree (PD) : PD 2 IP protection class : IP X0 Altitude of operation (m) : Up to 2000m Altitude of test laboratory (m) : Up to 2000m Mass of equipment (kg) : 0.18 kg max. The product was submitted and evaluated for use at the maximum ambient temperature (Tma) permitted by the manufacturer s specification of: 55 C The following circuit locations (with circuit/schematic designation) were investigated as a limited power source (LPS): All output ports. The following are available from the Applicant upon request: Installation (Safety) Instructions / Manual Ultracapacitor Module w/ future effective requirements: The product contains an ultracapacitor

8 Issue Date: Page 3 of 7 Report Reference # E A150-UL module that complies with the Standard for Electrochemical Capacitors, UL810A. Fire enclosure, electrical enclosure and mechanical enclosure shall be provided in the final system. Heating test need be evaluated in the final system. Additional Information For SuperCap Module: - Tecate Industries Inc / : rating = 13.5V, 2.0F, and with clause , E > 20J. - Tecate Industries Inc / : rating = 13.5V, 6.4F, and with clause , E > 20J. - Tecate Industries Inc / : rating = 13.5V, 6.4F, and with clause , E > 20J. Additional Standards The product fulfills the requirements of: CSA C22.2 No A1:2011 Markings and instructions Clause Title Power rating - Model Marking or Instruction Details Model Number Power rating - Company identification Replaceable batteries Accessory Instructions Listee's or Recognized company's name, Trade Name, Trademark or File Number "CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions." Accessory Marking is required. Statement "For use only with compatible UL Listed server that have Installation Instructions detailing user installation of card cage accessories" or similar statement is provided in the operation/user's manual and/or on the equipment. Special Instructions to UL Representative N/A

9 Issue Date: Page 4 of 7 Report Reference # E A150-UL Production-Line Testing Requirements Electric Strength Test Special Constructions - Refer to Generic Inspection Instructions, Part AC for further information. Model Component Removable Parts Test probe location V rms V dc Test Time, s Earthing Continuity Test Exemptions - This test is not required for the following models: All models. Electric Strength Test Exemptions - This test is not required for the following models: All models. Electric Strength Test Component Exemptions - The following solid-state components may be disconnected from the remainder of the circuitry during the performance of this test: -- Sample and Test Specifics for Follow-Up Tests at UL Model Component Material Test Sample(s) Test Specifics

10 Issue Date: Page 5 of 7 Report Reference # E A150-UL TABLE: list of critical components Pass Object/part or Manufacturer/ type/model technical data Product Category Required Supplement ID Description trademark CCN(s) Marks of Conformity 01. PWB interchangeable interchangeable Rated V-1 minimum, 105 degree C minimum ZPMV2 UL 02. Heat Sink (on U2A1) Aluminum. see Enclosure 4-04 for details Internal Plastic Part/ interchangeable interchangeable Rated V-2 minimum QMFZ2 UL Materials 04. Connectors and Receptacles (secondary ELV/SELV circuits) 05. Wiring (Secondary ELV/SELV) (Optional) 06. SuperCap Module (Optional) 06a. SuperCap Module (Alternate) (Optional) 06b. SuperCap Module (Alternate) (Optional) 07. Battery Pack(Optional) 08. Label (Marking on PWB) 09. Insulating Tubing/Sleeving (Optional) 10. Glue/Epoxy on daughter board (for Super Cap module) (Optional) interchangeable interchangeable Metal/plastics, Copper alloy pins housed in bodies of plastic rated V-2 min. interchangeable interchangeable FEP, PTFE, PVC, TFE, neoprene, polyimide or marked VW-1; 60 V min., 60 degree C min. DUXR2 or RTRT2 or ECBT2 or QMFZ2 AVLV2 Tecate Industries Inc Vdc, 2F BBBG2 UL Tecate Industries Inc Vdc, 6.4F BBBG2 UL Tecate Industries Inc Vdc, 6.4F BBBG2 UL Palladium Energy BAT1S1P-A 3.7Vdc,1.59Ah, 5.9W or 1.5Ah, NWGQ2, BBSF2 UL Inc/ LSI 5.6W Printed by ink interchangeable interchangeable FEP, PTFE, PVC, TFE, neoprene, polyimide or marked VW-1; 105 degree C, 300 V. interchangeable interchangeable V-2 min. covered on conductive parts of U6-pin1, pin2; U15- pin11; C25-pin1; C1-pin1; J1- pin1, pin2; Q3-pin4; Q1-pin5, pin6. See Enclosure ID 4-06 for detail. UZFT2, YDPU2, YDTU2 UL UL UL -- UL

11 Issue Date: Page 6 of 7 Report Reference # E A150-UL

12 Issue Date: Page 7 of 7 Report Reference # E A150-UL Enclosures Type Supplement Id Description Photographs 3-01 Overall View - 1 Photographs 3-02 Overall View 2 Photographs 3-03 Overall View 3 (With daughter board, SuperCap Module) Photographs 3-15 Overall View 4 (With daughter board, SuperCap Module) (Alternate) Photographs 3-16 Overall View 5 (With daughter board, SuperCap Module) (Alternate) Photographs 3-17 Overall View 6 (With daughter board, Battery Pack Module) Photographs 3-19 Daughter Board 1 Photographs 3-20 Daughter Board 2 Diagrams 4-02 Bracket with openings 1 Diagrams 4-03 Bracket with openings 2 (Alternate) Diagrams 4-04 Heatsink Diagrams 4-06 Glue Location Schematics + PWB Manuals Miscellaneous

13 File E Vol. X1 Sec. A150 PHO-01 Issued:

14 File E Vol. X1 Sec. A150 PHO-02 Issued:

15 File E Vol. X1 Sec. A150 PHO-03 Issued:

16 File E Vol. X1 Sec. A150 PHO-15 Issued:

17 File E Vol. X1 Sec. A150 PHO-16 Issued:

18 File E Vol. X1 Sec. A150 PHO-17 Issued:

19 File E Vol. X1 Sec. A150 PHO-19 Issued:

20 File E Vol. X1 Sec. A150 PHO-20 Issued:

21 File E Vol. X1 Sec. A150 DIA-02 Issued:

22 File E Vol. X1 Sec. A150 DIA-03 Issued:

23 File E Vol. X1 Sec. A150 DIA-04 Issued:

24 File E Vol. X1 Sec. A150 DIA-06 Issued: