Listing Constructional Data Report (CDR)

Transcription

1

2 Listing Constructional Data Report (CDR) 1.0 Reference and Address Report Number SZN-001 Original Information Technology Equipment Safety Part 1: General Requirements Standard(s) UL , 2nd Edition, Dated March 27, 2007, Revision December 19, 2011 & CSA-C22.2 No , 2nd Edition, Dated March 27, 2007, Revision December 19, 2011 Applicant Address 1/F, 3/F, 4/F of Building 9, Luck-King Science & Industry Park, Gongyedong Road, Longhua, Baoan, Shenzhen Manufacturer Address 1/F, 3/F, 4/F of Building 9, Luck-King Science & Industry Park, Gongyedong Road, Longhua, Baoan, Shenzhen Country Contact Phone FAX P. R. China Pengfei Yu (086) (086) Country Contact Phone FAX P. R. China Pengfei Yu (086) (086) Page 1 of 31

3 Page 2 of Product Description Product Brand name Description Models Touch Monitor KeeTouch The product covered by this report is a touch monitor powered by approved external power supply. KOT-0170US-SA4BCW, KOT-0190U-SA4BCW, KOT-0215U-CA2P, K*T-*****-****** See following table for details: Model Similarity Ratings Other Ratings 12VDC, 3A or 12VDC, 4A, Class III. NA

4 3.0 Product Photographs Page 3 of 31 Photo 1 - External View of Model KOT-0170US-SA4BCW Photo 2 - Rear View of Model KOT-0170US-SA4BCW Note: The rear enclosure may be replaced with a knock-down construction in the same size. Refer to Illustration 3 for details.

5 3.0 Product Photographs Page 4 of 31 Photo 3 - Internal View of Model KOT-0170US-SA4BCW Photo 4 - External View of Model KOT-0190U-SA4BCW 14

6 3.0 Product Photographs Page 5 of 31 Photo 5 - Rear View of Model KOT-0190U-SA4BCW 8 7 Note: The rear enclosure may be replaced with a knock-down construction in the same size. Refer to Illustration 3 for details. Photo 6 - Internal View of Model KOT-0190U-SA4BCW

7 3.0 Product Photographs Page 6 of 31 Photo 7 - External View of Model KOT-0215U-CA2P 15 Photo 8 - Rear View of Model KOT-0215U-CA2P 9

8 3.0 Product Photographs Page 7 of 31 Photo 9 - Internal View of Model KOT-0215U-CA2P Photo 10 - External View of External Power Supply with Model NO. PDN-48-36B 1

9 3.0 Product Photographs Page 8 of 31 Photo 11 - External View of External Power Supply with Model NO. WT Photo 12 - External View of External Power Supply with Model NO. WT

10 3.0 Product Photographs Page 9 of 31 Photo 13 - External View of External Power Supply with Model NO. PDN-48-40A 4 Photo 14 - Overall View of accessories

11 3.0 Product Photographs Photo 15 - Top View of Main Board SM270CLB Page 10 of 31 Photo 16 - Bottom View of Main Board SM270CLB

12 3.0 Product Photographs Photo 17 - Top View of Main Board SM271LU Page 11 of 31 Photo 18 - Bottom View of Main Board SM271LU

13 3.0 Product Photographs Photo 19 - Top View of Main Board SM483DB Page 12 of 31 Photo 20 - Bottom View of Main Board SM483DB

14 3.0 Product Photographs Page 13 of 31 Photo 21 - Top View of interface Board_1 within KOT-0170US-SA4BCW or KOT-0190U-SA4BCW Photo 22 - Bottom View of interface Board_1 within KOT-0170US-SA4BCW or KOT-0190U-SA4BCW

15 3.0 Product Photographs Page 14 of 31 Photo 23 - Top View of interface Board_2 within KOT-0170US-SA4BCW or KOT-0190U-SA4BCW Photo 24 - Bottom View of interface Board_2 within KOT-0170US-SA4BCW or KOT-0190U-SA4BCW

16 3.0 Product Photographs Page 15 of 31 Photo 25 - Top View and bottom View of LED board Photo 26 - Top View of PCB_1 within KOT-0170US-SA4BCW or KOT-0190U-SA4BCW

17 3.0 Product Photographs Page 16 of 31 Photo 27 - Top View of PCB_2 within KOT-0215U-CA2P Photo 28 - Bottom View of PCB_2 within KOT-0215U-CA2P

18 3.0 Product Photographs Page 17 of 31 Photo 29 - Bottom View of PCB_3 within KOT-0215U-CA2P

19 Page 18 of Critical Components Photo # Item no. 1 Name External Power Supply External Power Supply (Alternative) External Power Supply (Alternative) External Power Supply (Alternative) Manufacturer/ trademark 2 Type / model 2 Technical data and securement means SHENZHEN MEIKAI PDN-48-36B ELECTRONICS SHENZHEN WENTONG WT ELECTRONIC CO LTD SHENZHEN MEIKAI ELECTRONICS STOCK CO LTD PDN-48-48A SHENZHEN WENTONG WT ELECTRONIC CO LTD Input: VAC, 50-60Hz, 1.0A; Output: 12VDC, 3.0A. Input: VAC, 50/60Hz, 1.6A; Output: 12VDC, 3.0A. Input: VAC, 50-60Hz, 1.0A; Output: 12VDC, 4.0A. Input: VAC, 50/60Hz, 1.6A; Output: 12VDC, 4.0A. Mark(s) of conformity 3 culus culus culus culus 2 5 Metal Enclosure of model KOT- 0170US-SA4BCW Various Various Sheet steel minimum 1.0 mm thick, overall dimensions 36.2 cm by 30.3 cm. NR Openings on the metal enclosure of Various model KOT- 0170US-SA4BCW Metal Enclosure of model KOT- 0190U-SA4BCW Various Openings on the metal enclosure of Various model KOT- 0190U-SA4BCW Metal Enclosure of model KOT- 0215U-CA2P Plastic enclosure material Internal Wire Various Various Various Various Various Top openings: Ø4.9mm circular openings, 3 rows, total 78. Side openings: Ø4.9mm circular openings, 6 column, total 90. Bottom openings: Ø4.9mm circular openings, 2 rows, total 14. Sheet steel minimum 1.0 mm thick, overall dimensions 41.1 cm by 33.8 cm. Top openings: Ø4.9mm circular openings, 3 rows, total 84. Side openings: Ø4.9mm circular openings, 6 column, total 102. Bottom openings: Ø4.9mm circular openings, 1 row, total 9. Sheet steel minimum 1.0 mm thick, overall dimensions 51.3 cm by 30.7 cm. LG CHEM LTD AF312C V-0, 70 C, min thickess: 2.5 mm. curus SABIC INNOVATIVE 945 (GG) PLASTICS US L L V-0, 120 C, min thickess: 1.0 mm. curus C Various V, VW-1, 80 C. curus Various V, VW-1, 80 C, 24AWG or 26AWG. curus Various V, VW-1, 80 C, 26AWG. curus NR NR NR NR

20 Page 19 of Critical Components Photo # 3 Item no. 1 Name " LED Panel " LED Panel NOTES: PCB material 19" LED Panel Manufacturer/ trademark 2 Type / model 2 Technical data and securement means Mark(s) of conformity 3 SHEN ZHEN SHI CHANG DONG CDX-1, CDX-2 V-0, 130 C. curus XIN PCB CO LTD INTERNATIONAL LAMINATE ILM-R1## V-0, 130 C. curus MATERIAL LTD KINGBOARD LAMINATES KB-6150 V-0, 120 C. curus HOLDINGS LTD MEIZHOU KEJIE INTEGRATED CIRCUIT CO LTD KJ-2 V-0, 130 C. curus AU OPTRONICS CORP M170ETN Color TFT-LCD culus INNOLUX CORP MT190EN02 19 Color TFT-LCD culus AU OPTRONICS CORP M190ETN01 19 Color TFT-LCD culus AU OPTRONICS CORP M215HW Color TFT-LCD culus 1) Not all item numbers are indicated (called out) in the photos, as their location is obvious. 2) Various means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s) of conformity" can be used. 3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted and only visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section 5.0 for details.

21 5.0 Critical Unlisted CEC Components Page 20 of 31 No Unlisted CEC components are used in this report.

22 Page 21 of Critical Features Recognized Component - A component part, which has been previously evaluated by an accredited certification body with restrictions and must be evaluated as part of the basic product considering the restrictions as specified by the Conditions of Acceptability. Listed Component - A component part, which has been previously Listed or Certified by an accredited Certification Organization with no restrictions and is used in the intended application within its ratings. Unlisted Component - A part that has not been previously evaluated to the appropriate designated component standard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing or component recognition. Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of a product that has a direct bearing on the product s conformance to applicable requirements of the product standard. Construction Details - For specific construction details, reference should be made to the photographs and descriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to the specific construction details described in this Report, the following general requirements also apply. 1. Spacing - No primary circuits within the monitors and powered by SELV circuits. 2. Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and display lamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or other mounting format that prevents turning of the component. 3. Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or the equivalent. 4. Accessibility of Live Parts - No such live parts within the monitors. 5. Grounding - This product is not provided with a means of grounding as it is not required to be grounded since it is SELV circuit. 6. Polarized Connection - Relative marking placed on the label of external power supply. 7. Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminating in soldered connections are made mechanically secure prior to soldering. Recognized Component separable (quick disconnect) connectors of the positive detent type, closed loop connectors, or other types specifically described in the text of this report are also acceptable as internal wiring terminals. At points where internal wiring passes through metal walls or partitions, the wiring insulation is protected against abrasion or damage by plastic bushings or grommets. All wiring is minimum 26AWG, with a minimum rating of 30V, 80 C. 8. Schematics - NA 9. Markings - Refer to Illustration No(s). 1 for details. If evaluated to a Canadian Standard, the products may be required to have markings in both French and English. 10. Cautionary Markings - If evaluated to a Canadian Standard, all cautionary markings are required to present in French and English. 11. Installation, Operating and Safety Instructions - Instructions for installation and use of this product are provided by the manufacturer. Refer to Illustration No(s). 3 for details.

23 7.0 Illustrations Illustration 1 - Markings Page 22 of 31 Remark: for other models(refer to section 2.0), the marking is same as above except the model no., which would be changed accordingly. Note 1: The ETL, CETL logo shall not be less than 8 mm in width and in height, the "Intertek" shall not be less than 3 mm in height, the "C", "US" and the control No. " " shall not be less than 2 mm in height, the "CONFORMS TO UL STD " and "CERTIFIED TO CSA STD.C22.2 No " shall not be less than 1.5 mm in height, the "CM" shall not be less than 1 mm in height. Note 2: Caution and warning markings shall be in both French and English when selling in Canada.

24 7.0 Illustrations Illustration 2 - Labels of External Power Supply Page 23 of 31 () Label for external power supply

25 7.0 Illustrations Illustration 2 - Safety Instructions Page 24 of 31

26 7.0 Illustrations Page 25 of 31 Illustration 3 - Allternative design of rear enclosure Note: This design with a knock-down construction is identical with the one showed in section 3.0. Oblong sheet shall be fixing with screws in the mormal operation.

27

28 Page 27 of Correlation Page For Multiple Listings The following products, which are identical to those identified in this report except for model number and Listee name, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program. BASIC LISTEE Address Country Product 1/F, 3/F, 4/F of Building 9, Luck-King Science & Industry Park, Gongyedong Road, Longhua, Baoan, Shenzhen P. R. China Touch Monitor MULTIPLE LISTEE 1 Address Country Brand Name ASSOCIATED MANUFACTURER Address Country None MULTIPLE LISTEE 1 MODELS BASIC LISTEE MODELS MULTIPLE LISTEE 2 Address Country Brand Name ASSOCIATED MANUFACTURER Address Country None MULTIPLE LISTEE 2 MODELS BASIC LISTEE MODELS MULTIPLE LISTEE 3 Address Country Brand Name ASSOCIATED MANUFACTURER Address Country None MULTIPLE LISTEE 3 MODELS BASIC LISTEE MODELS

29 Page 28 of General Information The Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance with the requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorization prior to using alternate parts, components or materials. COMPONENTS Components used shall be those itemized in this Intertek report covering the product, including any amendments and/or revisions. LISTING MARK The ETL Listing mark applied to the products shall either be separable in form, such as labels purchased from Intertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark is subject to the control of Intertek. The mark must include the following four items: 1) applicable country identifiers "US" and/or "C" or "US", "C" and "EU" 2) the word "Listed" or "Classified" or "Recognized Component" (whichever is appropriate) 3) a control number issue by Intertek 4) a product descriptor that identifies the standards used for certification. Example: For US standards, the words, Conforms to shall appear with the standard number along with the word, Standard or Std. Example: Conforms to ANSI/UL Std. XX. For Canadian standards, the words Certified to CAN/CSA Standard CXX No. XX. shall be used, or abbreviated, Cert. to CAN/CSA Std. CXX No. XX. Can be used together when both standards are used. Note: A facsimile must be submitted to Intertek, Attn: Follow-up Services for approval prior to use. The facsimile need not have a control number. A control number will be issued after signed Certification Agreements have been received by the Follow-up Services office, approval of the facsimile of your proposed Listing Mark, satisfactory completion of the Listing Report, and scheduling of a factory assessment in your facility. MANUFACTURING AND PRODUCTION TESTS Manufacturing and Production Tests shall be performed as required in this Report. FOLLOW-UP SERVICE Periodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shall be scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to the following: 1. Conformance of the manufactured product to the descriptions in this Report. 2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement. 3. Manufacturing changes. 4. Performance of specified Manufacturing and Production Tests. In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, the Applicant shall take one or more of the following actions: 1. Correct the non-conformance. 2. Remove the ETL Mark from non-conforming product. 3. Contact the issuing product safety evaluation center for instructions.

30 Page 29 of Evaluation of Unlisted Components Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program, Intertek may require these components to be tested and/or evaluated at least once annually, more often for certain components, as part of the independent certification process. The Unlisted Components in Section 5.0 require testing and/or evaluation as indicated. Note to Intertek Follow Up Inspector: The Component Evaluation Center, CEC, will notify you in writing when these components must be selected and sent to the CEC for re-evaluation Ship the samples to: Intertek Testing Services NA Inc. ETL Component Evaluation Center Helm Street, Suite 150 Plymouth Twp., MI USA Attn: Component Evaluation Center Sample Disposition: Due to the destructive nature of the testing, all samples will be discarded at the conclusion of testing unless, the manufacturer specifically requests the return of the samples. The request for return must accompany the initial component shipment.

31 11.0 Manufacturing and Production Tests No such test shall be needed. Page 30 of 31

32 Page 31 of Revision Summary The following changes are in compliance with the declaration of Section 8.1: Date/ Project Handler/ Proj # Site ID Reviewer Section Item Description of Change None